Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
[linux-2.6] / drivers / mmc / host / sdhci.c
1 /*
2  *  linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
3  *
4  *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or (at
9  * your option) any later version.
10  *
11  * Thanks to the following companies for their support:
12  *
13  *     - JMicron (hardware and technical support)
14  */
15
16 #include <linux/delay.h>
17 #include <linux/highmem.h>
18 #include <linux/io.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/scatterlist.h>
21
22 #include <linux/leds.h>
23
24 #include <linux/mmc/host.h>
25
26 #include "sdhci.h"
27
28 #define DRIVER_NAME "sdhci"
29
30 #define DBG(f, x...) \
31         pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
32
33 static unsigned int debug_quirks = 0;
34
35 static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
36 static void sdhci_finish_data(struct sdhci_host *);
37
38 static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
39 static void sdhci_finish_command(struct sdhci_host *);
40
41 static void sdhci_dumpregs(struct sdhci_host *host)
42 {
43         printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
44
45         printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version:  0x%08x\n",
46                 readl(host->ioaddr + SDHCI_DMA_ADDRESS),
47                 readw(host->ioaddr + SDHCI_HOST_VERSION));
48         printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt:  0x%08x\n",
49                 readw(host->ioaddr + SDHCI_BLOCK_SIZE),
50                 readw(host->ioaddr + SDHCI_BLOCK_COUNT));
51         printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
52                 readl(host->ioaddr + SDHCI_ARGUMENT),
53                 readw(host->ioaddr + SDHCI_TRANSFER_MODE));
54         printk(KERN_DEBUG DRIVER_NAME ": Present:  0x%08x | Host ctl: 0x%08x\n",
55                 readl(host->ioaddr + SDHCI_PRESENT_STATE),
56                 readb(host->ioaddr + SDHCI_HOST_CONTROL));
57         printk(KERN_DEBUG DRIVER_NAME ": Power:    0x%08x | Blk gap:  0x%08x\n",
58                 readb(host->ioaddr + SDHCI_POWER_CONTROL),
59                 readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL));
60         printk(KERN_DEBUG DRIVER_NAME ": Wake-up:  0x%08x | Clock:    0x%08x\n",
61                 readb(host->ioaddr + SDHCI_WAKE_UP_CONTROL),
62                 readw(host->ioaddr + SDHCI_CLOCK_CONTROL));
63         printk(KERN_DEBUG DRIVER_NAME ": Timeout:  0x%08x | Int stat: 0x%08x\n",
64                 readb(host->ioaddr + SDHCI_TIMEOUT_CONTROL),
65                 readl(host->ioaddr + SDHCI_INT_STATUS));
66         printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
67                 readl(host->ioaddr + SDHCI_INT_ENABLE),
68                 readl(host->ioaddr + SDHCI_SIGNAL_ENABLE));
69         printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
70                 readw(host->ioaddr + SDHCI_ACMD12_ERR),
71                 readw(host->ioaddr + SDHCI_SLOT_INT_STATUS));
72         printk(KERN_DEBUG DRIVER_NAME ": Caps:     0x%08x | Max curr: 0x%08x\n",
73                 readl(host->ioaddr + SDHCI_CAPABILITIES),
74                 readl(host->ioaddr + SDHCI_MAX_CURRENT));
75
76         printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
77 }
78
79 /*****************************************************************************\
80  *                                                                           *
81  * Low level functions                                                       *
82  *                                                                           *
83 \*****************************************************************************/
84
85 static void sdhci_reset(struct sdhci_host *host, u8 mask)
86 {
87         unsigned long timeout;
88
89         if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
90                 if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
91                         SDHCI_CARD_PRESENT))
92                         return;
93         }
94
95         writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
96
97         if (mask & SDHCI_RESET_ALL)
98                 host->clock = 0;
99
100         /* Wait max 100 ms */
101         timeout = 100;
102
103         /* hw clears the bit when it's done */
104         while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
105                 if (timeout == 0) {
106                         printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
107                                 mmc_hostname(host->mmc), (int)mask);
108                         sdhci_dumpregs(host);
109                         return;
110                 }
111                 timeout--;
112                 mdelay(1);
113         }
114 }
115
116 static void sdhci_init(struct sdhci_host *host)
117 {
118         u32 intmask;
119
120         sdhci_reset(host, SDHCI_RESET_ALL);
121
122         intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
123                 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
124                 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
125                 SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
126                 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
127                 SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE |
128                 SDHCI_INT_ADMA_ERROR;
129
130         writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
131         writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
132 }
133
134 static void sdhci_activate_led(struct sdhci_host *host)
135 {
136         u8 ctrl;
137
138         ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
139         ctrl |= SDHCI_CTRL_LED;
140         writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
141 }
142
143 static void sdhci_deactivate_led(struct sdhci_host *host)
144 {
145         u8 ctrl;
146
147         ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
148         ctrl &= ~SDHCI_CTRL_LED;
149         writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
150 }
151
152 #ifdef CONFIG_LEDS_CLASS
153 static void sdhci_led_control(struct led_classdev *led,
154         enum led_brightness brightness)
155 {
156         struct sdhci_host *host = container_of(led, struct sdhci_host, led);
157         unsigned long flags;
158
159         spin_lock_irqsave(&host->lock, flags);
160
161         if (brightness == LED_OFF)
162                 sdhci_deactivate_led(host);
163         else
164                 sdhci_activate_led(host);
165
166         spin_unlock_irqrestore(&host->lock, flags);
167 }
168 #endif
169
170 /*****************************************************************************\
171  *                                                                           *
172  * Core functions                                                            *
173  *                                                                           *
174 \*****************************************************************************/
175
176 static void sdhci_read_block_pio(struct sdhci_host *host)
177 {
178         unsigned long flags;
179         size_t blksize, len, chunk;
180         u32 scratch;
181         u8 *buf;
182
183         DBG("PIO reading\n");
184
185         blksize = host->data->blksz;
186         chunk = 0;
187
188         local_irq_save(flags);
189
190         while (blksize) {
191                 if (!sg_miter_next(&host->sg_miter))
192                         BUG();
193
194                 len = min(host->sg_miter.length, blksize);
195
196                 blksize -= len;
197                 host->sg_miter.consumed = len;
198
199                 buf = host->sg_miter.addr;
200
201                 while (len) {
202                         if (chunk == 0) {
203                                 scratch = readl(host->ioaddr + SDHCI_BUFFER);
204                                 chunk = 4;
205                         }
206
207                         *buf = scratch & 0xFF;
208
209                         buf++;
210                         scratch >>= 8;
211                         chunk--;
212                         len--;
213                 }
214         }
215
216         sg_miter_stop(&host->sg_miter);
217
218         local_irq_restore(flags);
219 }
220
221 static void sdhci_write_block_pio(struct sdhci_host *host)
222 {
223         unsigned long flags;
224         size_t blksize, len, chunk;
225         u32 scratch;
226         u8 *buf;
227
228         DBG("PIO writing\n");
229
230         blksize = host->data->blksz;
231         chunk = 0;
232         scratch = 0;
233
234         local_irq_save(flags);
235
236         while (blksize) {
237                 if (!sg_miter_next(&host->sg_miter))
238                         BUG();
239
240                 len = min(host->sg_miter.length, blksize);
241
242                 blksize -= len;
243                 host->sg_miter.consumed = len;
244
245                 buf = host->sg_miter.addr;
246
247                 while (len) {
248                         scratch |= (u32)*buf << (chunk * 8);
249
250                         buf++;
251                         chunk++;
252                         len--;
253
254                         if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
255                                 writel(scratch, host->ioaddr + SDHCI_BUFFER);
256                                 chunk = 0;
257                                 scratch = 0;
258                         }
259                 }
260         }
261
262         sg_miter_stop(&host->sg_miter);
263
264         local_irq_restore(flags);
265 }
266
267 static void sdhci_transfer_pio(struct sdhci_host *host)
268 {
269         u32 mask;
270
271         BUG_ON(!host->data);
272
273         if (host->blocks == 0)
274                 return;
275
276         if (host->data->flags & MMC_DATA_READ)
277                 mask = SDHCI_DATA_AVAILABLE;
278         else
279                 mask = SDHCI_SPACE_AVAILABLE;
280
281         /*
282          * Some controllers (JMicron JMB38x) mess up the buffer bits
283          * for transfers < 4 bytes. As long as it is just one block,
284          * we can ignore the bits.
285          */
286         if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
287                 (host->data->blocks == 1))
288                 mask = ~0;
289
290         while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
291                 if (host->data->flags & MMC_DATA_READ)
292                         sdhci_read_block_pio(host);
293                 else
294                         sdhci_write_block_pio(host);
295
296                 host->blocks--;
297                 if (host->blocks == 0)
298                         break;
299         }
300
301         DBG("PIO transfer complete.\n");
302 }
303
304 static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
305 {
306         local_irq_save(*flags);
307         return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
308 }
309
310 static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
311 {
312         kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
313         local_irq_restore(*flags);
314 }
315
316 static int sdhci_adma_table_pre(struct sdhci_host *host,
317         struct mmc_data *data)
318 {
319         int direction;
320
321         u8 *desc;
322         u8 *align;
323         dma_addr_t addr;
324         dma_addr_t align_addr;
325         int len, offset;
326
327         struct scatterlist *sg;
328         int i;
329         char *buffer;
330         unsigned long flags;
331
332         /*
333          * The spec does not specify endianness of descriptor table.
334          * We currently guess that it is LE.
335          */
336
337         if (data->flags & MMC_DATA_READ)
338                 direction = DMA_FROM_DEVICE;
339         else
340                 direction = DMA_TO_DEVICE;
341
342         /*
343          * The ADMA descriptor table is mapped further down as we
344          * need to fill it with data first.
345          */
346
347         host->align_addr = dma_map_single(mmc_dev(host->mmc),
348                 host->align_buffer, 128 * 4, direction);
349         if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
350                 goto fail;
351         BUG_ON(host->align_addr & 0x3);
352
353         host->sg_count = dma_map_sg(mmc_dev(host->mmc),
354                 data->sg, data->sg_len, direction);
355         if (host->sg_count == 0)
356                 goto unmap_align;
357
358         desc = host->adma_desc;
359         align = host->align_buffer;
360
361         align_addr = host->align_addr;
362
363         for_each_sg(data->sg, sg, host->sg_count, i) {
364                 addr = sg_dma_address(sg);
365                 len = sg_dma_len(sg);
366
367                 /*
368                  * The SDHCI specification states that ADMA
369                  * addresses must be 32-bit aligned. If they
370                  * aren't, then we use a bounce buffer for
371                  * the (up to three) bytes that screw up the
372                  * alignment.
373                  */
374                 offset = (4 - (addr & 0x3)) & 0x3;
375                 if (offset) {
376                         if (data->flags & MMC_DATA_WRITE) {
377                                 buffer = sdhci_kmap_atomic(sg, &flags);
378                                 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
379                                 memcpy(align, buffer, offset);
380                                 sdhci_kunmap_atomic(buffer, &flags);
381                         }
382
383                         desc[7] = (align_addr >> 24) & 0xff;
384                         desc[6] = (align_addr >> 16) & 0xff;
385                         desc[5] = (align_addr >> 8) & 0xff;
386                         desc[4] = (align_addr >> 0) & 0xff;
387
388                         BUG_ON(offset > 65536);
389
390                         desc[3] = (offset >> 8) & 0xff;
391                         desc[2] = (offset >> 0) & 0xff;
392
393                         desc[1] = 0x00;
394                         desc[0] = 0x21; /* tran, valid */
395
396                         align += 4;
397                         align_addr += 4;
398
399                         desc += 8;
400
401                         addr += offset;
402                         len -= offset;
403                 }
404
405                 desc[7] = (addr >> 24) & 0xff;
406                 desc[6] = (addr >> 16) & 0xff;
407                 desc[5] = (addr >> 8) & 0xff;
408                 desc[4] = (addr >> 0) & 0xff;
409
410                 BUG_ON(len > 65536);
411
412                 desc[3] = (len >> 8) & 0xff;
413                 desc[2] = (len >> 0) & 0xff;
414
415                 desc[1] = 0x00;
416                 desc[0] = 0x21; /* tran, valid */
417
418                 desc += 8;
419
420                 /*
421                  * If this triggers then we have a calculation bug
422                  * somewhere. :/
423                  */
424                 WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
425         }
426
427         /*
428          * Add a terminating entry.
429          */
430         desc[7] = 0;
431         desc[6] = 0;
432         desc[5] = 0;
433         desc[4] = 0;
434
435         desc[3] = 0;
436         desc[2] = 0;
437
438         desc[1] = 0x00;
439         desc[0] = 0x03; /* nop, end, valid */
440
441         /*
442          * Resync align buffer as we might have changed it.
443          */
444         if (data->flags & MMC_DATA_WRITE) {
445                 dma_sync_single_for_device(mmc_dev(host->mmc),
446                         host->align_addr, 128 * 4, direction);
447         }
448
449         host->adma_addr = dma_map_single(mmc_dev(host->mmc),
450                 host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
451         if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
452                 goto unmap_entries;
453         BUG_ON(host->adma_addr & 0x3);
454
455         return 0;
456
457 unmap_entries:
458         dma_unmap_sg(mmc_dev(host->mmc), data->sg,
459                 data->sg_len, direction);
460 unmap_align:
461         dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
462                 128 * 4, direction);
463 fail:
464         return -EINVAL;
465 }
466
467 static void sdhci_adma_table_post(struct sdhci_host *host,
468         struct mmc_data *data)
469 {
470         int direction;
471
472         struct scatterlist *sg;
473         int i, size;
474         u8 *align;
475         char *buffer;
476         unsigned long flags;
477
478         if (data->flags & MMC_DATA_READ)
479                 direction = DMA_FROM_DEVICE;
480         else
481                 direction = DMA_TO_DEVICE;
482
483         dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
484                 (128 * 2 + 1) * 4, DMA_TO_DEVICE);
485
486         dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
487                 128 * 4, direction);
488
489         if (data->flags & MMC_DATA_READ) {
490                 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
491                         data->sg_len, direction);
492
493                 align = host->align_buffer;
494
495                 for_each_sg(data->sg, sg, host->sg_count, i) {
496                         if (sg_dma_address(sg) & 0x3) {
497                                 size = 4 - (sg_dma_address(sg) & 0x3);
498
499                                 buffer = sdhci_kmap_atomic(sg, &flags);
500                                 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
501                                 memcpy(buffer, align, size);
502                                 sdhci_kunmap_atomic(buffer, &flags);
503
504                                 align += 4;
505                         }
506                 }
507         }
508
509         dma_unmap_sg(mmc_dev(host->mmc), data->sg,
510                 data->sg_len, direction);
511 }
512
513 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
514 {
515         u8 count;
516         unsigned target_timeout, current_timeout;
517
518         /*
519          * If the host controller provides us with an incorrect timeout
520          * value, just skip the check and use 0xE.  The hardware may take
521          * longer to time out, but that's much better than having a too-short
522          * timeout value.
523          */
524         if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL))
525                 return 0xE;
526
527         /* timeout in us */
528         target_timeout = data->timeout_ns / 1000 +
529                 data->timeout_clks / host->clock;
530
531         /*
532          * Figure out needed cycles.
533          * We do this in steps in order to fit inside a 32 bit int.
534          * The first step is the minimum timeout, which will have a
535          * minimum resolution of 6 bits:
536          * (1) 2^13*1000 > 2^22,
537          * (2) host->timeout_clk < 2^16
538          *     =>
539          *     (1) / (2) > 2^6
540          */
541         count = 0;
542         current_timeout = (1 << 13) * 1000 / host->timeout_clk;
543         while (current_timeout < target_timeout) {
544                 count++;
545                 current_timeout <<= 1;
546                 if (count >= 0xF)
547                         break;
548         }
549
550         if (count >= 0xF) {
551                 printk(KERN_WARNING "%s: Too large timeout requested!\n",
552                         mmc_hostname(host->mmc));
553                 count = 0xE;
554         }
555
556         return count;
557 }
558
559 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
560 {
561         u8 count;
562         u8 ctrl;
563         int ret;
564
565         WARN_ON(host->data);
566
567         if (data == NULL)
568                 return;
569
570         /* Sanity checks */
571         BUG_ON(data->blksz * data->blocks > 524288);
572         BUG_ON(data->blksz > host->mmc->max_blk_size);
573         BUG_ON(data->blocks > 65535);
574
575         host->data = data;
576         host->data_early = 0;
577
578         count = sdhci_calc_timeout(host, data);
579         writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
580
581         if (host->flags & SDHCI_USE_DMA)
582                 host->flags |= SDHCI_REQ_USE_DMA;
583
584         /*
585          * FIXME: This doesn't account for merging when mapping the
586          * scatterlist.
587          */
588         if (host->flags & SDHCI_REQ_USE_DMA) {
589                 int broken, i;
590                 struct scatterlist *sg;
591
592                 broken = 0;
593                 if (host->flags & SDHCI_USE_ADMA) {
594                         if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
595                                 broken = 1;
596                 } else {
597                         if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
598                                 broken = 1;
599                 }
600
601                 if (unlikely(broken)) {
602                         for_each_sg(data->sg, sg, data->sg_len, i) {
603                                 if (sg->length & 0x3) {
604                                         DBG("Reverting to PIO because of "
605                                                 "transfer size (%d)\n",
606                                                 sg->length);
607                                         host->flags &= ~SDHCI_REQ_USE_DMA;
608                                         break;
609                                 }
610                         }
611                 }
612         }
613
614         /*
615          * The assumption here being that alignment is the same after
616          * translation to device address space.
617          */
618         if (host->flags & SDHCI_REQ_USE_DMA) {
619                 int broken, i;
620                 struct scatterlist *sg;
621
622                 broken = 0;
623                 if (host->flags & SDHCI_USE_ADMA) {
624                         /*
625                          * As we use 3 byte chunks to work around
626                          * alignment problems, we need to check this
627                          * quirk.
628                          */
629                         if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
630                                 broken = 1;
631                 } else {
632                         if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
633                                 broken = 1;
634                 }
635
636                 if (unlikely(broken)) {
637                         for_each_sg(data->sg, sg, data->sg_len, i) {
638                                 if (sg->offset & 0x3) {
639                                         DBG("Reverting to PIO because of "
640                                                 "bad alignment\n");
641                                         host->flags &= ~SDHCI_REQ_USE_DMA;
642                                         break;
643                                 }
644                         }
645                 }
646         }
647
648         if (host->flags & SDHCI_REQ_USE_DMA) {
649                 if (host->flags & SDHCI_USE_ADMA) {
650                         ret = sdhci_adma_table_pre(host, data);
651                         if (ret) {
652                                 /*
653                                  * This only happens when someone fed
654                                  * us an invalid request.
655                                  */
656                                 WARN_ON(1);
657                                 host->flags &= ~SDHCI_REQ_USE_DMA;
658                         } else {
659                                 writel(host->adma_addr,
660                                         host->ioaddr + SDHCI_ADMA_ADDRESS);
661                         }
662                 } else {
663                         int sg_cnt;
664
665                         sg_cnt = dma_map_sg(mmc_dev(host->mmc),
666                                         data->sg, data->sg_len,
667                                         (data->flags & MMC_DATA_READ) ?
668                                                 DMA_FROM_DEVICE :
669                                                 DMA_TO_DEVICE);
670                         if (sg_cnt == 0) {
671                                 /*
672                                  * This only happens when someone fed
673                                  * us an invalid request.
674                                  */
675                                 WARN_ON(1);
676                                 host->flags &= ~SDHCI_REQ_USE_DMA;
677                         } else {
678                                 WARN_ON(sg_cnt != 1);
679                                 writel(sg_dma_address(data->sg),
680                                         host->ioaddr + SDHCI_DMA_ADDRESS);
681                         }
682                 }
683         }
684
685         /*
686          * Always adjust the DMA selection as some controllers
687          * (e.g. JMicron) can't do PIO properly when the selection
688          * is ADMA.
689          */
690         if (host->version >= SDHCI_SPEC_200) {
691                 ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
692                 ctrl &= ~SDHCI_CTRL_DMA_MASK;
693                 if ((host->flags & SDHCI_REQ_USE_DMA) &&
694                         (host->flags & SDHCI_USE_ADMA))
695                         ctrl |= SDHCI_CTRL_ADMA32;
696                 else
697                         ctrl |= SDHCI_CTRL_SDMA;
698                 writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
699         }
700
701         if (!(host->flags & SDHCI_REQ_USE_DMA)) {
702                 sg_miter_start(&host->sg_miter,
703                         data->sg, data->sg_len, SG_MITER_ATOMIC);
704                 host->blocks = data->blocks;
705         }
706
707         /* We do not handle DMA boundaries, so set it to max (512 KiB) */
708         writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
709                 host->ioaddr + SDHCI_BLOCK_SIZE);
710         writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
711 }
712
713 static void sdhci_set_transfer_mode(struct sdhci_host *host,
714         struct mmc_data *data)
715 {
716         u16 mode;
717
718         if (data == NULL)
719                 return;
720
721         WARN_ON(!host->data);
722
723         mode = SDHCI_TRNS_BLK_CNT_EN;
724         if (data->blocks > 1)
725                 mode |= SDHCI_TRNS_MULTI;
726         if (data->flags & MMC_DATA_READ)
727                 mode |= SDHCI_TRNS_READ;
728         if (host->flags & SDHCI_REQ_USE_DMA)
729                 mode |= SDHCI_TRNS_DMA;
730
731         writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
732 }
733
734 static void sdhci_finish_data(struct sdhci_host *host)
735 {
736         struct mmc_data *data;
737
738         BUG_ON(!host->data);
739
740         data = host->data;
741         host->data = NULL;
742
743         if (host->flags & SDHCI_REQ_USE_DMA) {
744                 if (host->flags & SDHCI_USE_ADMA)
745                         sdhci_adma_table_post(host, data);
746                 else {
747                         dma_unmap_sg(mmc_dev(host->mmc), data->sg,
748                                 data->sg_len, (data->flags & MMC_DATA_READ) ?
749                                         DMA_FROM_DEVICE : DMA_TO_DEVICE);
750                 }
751         }
752
753         /*
754          * The specification states that the block count register must
755          * be updated, but it does not specify at what point in the
756          * data flow. That makes the register entirely useless to read
757          * back so we have to assume that nothing made it to the card
758          * in the event of an error.
759          */
760         if (data->error)
761                 data->bytes_xfered = 0;
762         else
763                 data->bytes_xfered = data->blksz * data->blocks;
764
765         if (data->stop) {
766                 /*
767                  * The controller needs a reset of internal state machines
768                  * upon error conditions.
769                  */
770                 if (data->error) {
771                         sdhci_reset(host, SDHCI_RESET_CMD);
772                         sdhci_reset(host, SDHCI_RESET_DATA);
773                 }
774
775                 sdhci_send_command(host, data->stop);
776         } else
777                 tasklet_schedule(&host->finish_tasklet);
778 }
779
780 static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
781 {
782         int flags;
783         u32 mask;
784         unsigned long timeout;
785
786         WARN_ON(host->cmd);
787
788         /* Wait max 10 ms */
789         timeout = 10;
790
791         mask = SDHCI_CMD_INHIBIT;
792         if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
793                 mask |= SDHCI_DATA_INHIBIT;
794
795         /* We shouldn't wait for data inihibit for stop commands, even
796            though they might use busy signaling */
797         if (host->mrq->data && (cmd == host->mrq->data->stop))
798                 mask &= ~SDHCI_DATA_INHIBIT;
799
800         while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
801                 if (timeout == 0) {
802                         printk(KERN_ERR "%s: Controller never released "
803                                 "inhibit bit(s).\n", mmc_hostname(host->mmc));
804                         sdhci_dumpregs(host);
805                         cmd->error = -EIO;
806                         tasklet_schedule(&host->finish_tasklet);
807                         return;
808                 }
809                 timeout--;
810                 mdelay(1);
811         }
812
813         mod_timer(&host->timer, jiffies + 10 * HZ);
814
815         host->cmd = cmd;
816
817         sdhci_prepare_data(host, cmd->data);
818
819         writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
820
821         sdhci_set_transfer_mode(host, cmd->data);
822
823         if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
824                 printk(KERN_ERR "%s: Unsupported response type!\n",
825                         mmc_hostname(host->mmc));
826                 cmd->error = -EINVAL;
827                 tasklet_schedule(&host->finish_tasklet);
828                 return;
829         }
830
831         if (!(cmd->flags & MMC_RSP_PRESENT))
832                 flags = SDHCI_CMD_RESP_NONE;
833         else if (cmd->flags & MMC_RSP_136)
834                 flags = SDHCI_CMD_RESP_LONG;
835         else if (cmd->flags & MMC_RSP_BUSY)
836                 flags = SDHCI_CMD_RESP_SHORT_BUSY;
837         else
838                 flags = SDHCI_CMD_RESP_SHORT;
839
840         if (cmd->flags & MMC_RSP_CRC)
841                 flags |= SDHCI_CMD_CRC;
842         if (cmd->flags & MMC_RSP_OPCODE)
843                 flags |= SDHCI_CMD_INDEX;
844         if (cmd->data)
845                 flags |= SDHCI_CMD_DATA;
846
847         writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
848                 host->ioaddr + SDHCI_COMMAND);
849 }
850
851 static void sdhci_finish_command(struct sdhci_host *host)
852 {
853         int i;
854
855         BUG_ON(host->cmd == NULL);
856
857         if (host->cmd->flags & MMC_RSP_PRESENT) {
858                 if (host->cmd->flags & MMC_RSP_136) {
859                         /* CRC is stripped so we need to do some shifting. */
860                         for (i = 0;i < 4;i++) {
861                                 host->cmd->resp[i] = readl(host->ioaddr +
862                                         SDHCI_RESPONSE + (3-i)*4) << 8;
863                                 if (i != 3)
864                                         host->cmd->resp[i] |=
865                                                 readb(host->ioaddr +
866                                                 SDHCI_RESPONSE + (3-i)*4-1);
867                         }
868                 } else {
869                         host->cmd->resp[0] = readl(host->ioaddr + SDHCI_RESPONSE);
870                 }
871         }
872
873         host->cmd->error = 0;
874
875         if (host->data && host->data_early)
876                 sdhci_finish_data(host);
877
878         if (!host->cmd->data)
879                 tasklet_schedule(&host->finish_tasklet);
880
881         host->cmd = NULL;
882 }
883
884 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
885 {
886         int div;
887         u16 clk;
888         unsigned long timeout;
889
890         if (clock == host->clock)
891                 return;
892
893         writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
894
895         if (clock == 0)
896                 goto out;
897
898         for (div = 1;div < 256;div *= 2) {
899                 if ((host->max_clk / div) <= clock)
900                         break;
901         }
902         div >>= 1;
903
904         clk = div << SDHCI_DIVIDER_SHIFT;
905         clk |= SDHCI_CLOCK_INT_EN;
906         writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
907
908         /* Wait max 10 ms */
909         timeout = 10;
910         while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
911                 & SDHCI_CLOCK_INT_STABLE)) {
912                 if (timeout == 0) {
913                         printk(KERN_ERR "%s: Internal clock never "
914                                 "stabilised.\n", mmc_hostname(host->mmc));
915                         sdhci_dumpregs(host);
916                         return;
917                 }
918                 timeout--;
919                 mdelay(1);
920         }
921
922         clk |= SDHCI_CLOCK_CARD_EN;
923         writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
924
925 out:
926         host->clock = clock;
927 }
928
929 static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
930 {
931         u8 pwr;
932
933         if (host->power == power)
934                 return;
935
936         if (power == (unsigned short)-1) {
937                 writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
938                 goto out;
939         }
940
941         /*
942          * Spec says that we should clear the power reg before setting
943          * a new value. Some controllers don't seem to like this though.
944          */
945         if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
946                 writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
947
948         pwr = SDHCI_POWER_ON;
949
950         switch (1 << power) {
951         case MMC_VDD_165_195:
952                 pwr |= SDHCI_POWER_180;
953                 break;
954         case MMC_VDD_29_30:
955         case MMC_VDD_30_31:
956                 pwr |= SDHCI_POWER_300;
957                 break;
958         case MMC_VDD_32_33:
959         case MMC_VDD_33_34:
960                 pwr |= SDHCI_POWER_330;
961                 break;
962         default:
963                 BUG();
964         }
965
966         /*
967          * At least the Marvell CaFe chip gets confused if we set the voltage
968          * and set turn on power at the same time, so set the voltage first.
969          */
970         if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
971                 writeb(pwr & ~SDHCI_POWER_ON,
972                                 host->ioaddr + SDHCI_POWER_CONTROL);
973
974         writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
975
976 out:
977         host->power = power;
978 }
979
980 /*****************************************************************************\
981  *                                                                           *
982  * MMC callbacks                                                             *
983  *                                                                           *
984 \*****************************************************************************/
985
986 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
987 {
988         struct sdhci_host *host;
989         unsigned long flags;
990
991         host = mmc_priv(mmc);
992
993         spin_lock_irqsave(&host->lock, flags);
994
995         WARN_ON(host->mrq != NULL);
996
997 #ifndef CONFIG_LEDS_CLASS
998         sdhci_activate_led(host);
999 #endif
1000
1001         host->mrq = mrq;
1002
1003         if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
1004                 || (host->flags & SDHCI_DEVICE_DEAD)) {
1005                 host->mrq->cmd->error = -ENOMEDIUM;
1006                 tasklet_schedule(&host->finish_tasklet);
1007         } else
1008                 sdhci_send_command(host, mrq->cmd);
1009
1010         mmiowb();
1011         spin_unlock_irqrestore(&host->lock, flags);
1012 }
1013
1014 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1015 {
1016         struct sdhci_host *host;
1017         unsigned long flags;
1018         u8 ctrl;
1019
1020         host = mmc_priv(mmc);
1021
1022         spin_lock_irqsave(&host->lock, flags);
1023
1024         if (host->flags & SDHCI_DEVICE_DEAD)
1025                 goto out;
1026
1027         /*
1028          * Reset the chip on each power off.
1029          * Should clear out any weird states.
1030          */
1031         if (ios->power_mode == MMC_POWER_OFF) {
1032                 writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
1033                 sdhci_init(host);
1034         }
1035
1036         sdhci_set_clock(host, ios->clock);
1037
1038         if (ios->power_mode == MMC_POWER_OFF)
1039                 sdhci_set_power(host, -1);
1040         else
1041                 sdhci_set_power(host, ios->vdd);
1042
1043         ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
1044
1045         if (ios->bus_width == MMC_BUS_WIDTH_4)
1046                 ctrl |= SDHCI_CTRL_4BITBUS;
1047         else
1048                 ctrl &= ~SDHCI_CTRL_4BITBUS;
1049
1050         if (ios->timing == MMC_TIMING_SD_HS)
1051                 ctrl |= SDHCI_CTRL_HISPD;
1052         else
1053                 ctrl &= ~SDHCI_CTRL_HISPD;
1054
1055         writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
1056
1057         /*
1058          * Some (ENE) controllers go apeshit on some ios operation,
1059          * signalling timeout and CRC errors even on CMD0. Resetting
1060          * it on each ios seems to solve the problem.
1061          */
1062         if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
1063                 sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
1064
1065 out:
1066         mmiowb();
1067         spin_unlock_irqrestore(&host->lock, flags);
1068 }
1069
1070 static int sdhci_get_ro(struct mmc_host *mmc)
1071 {
1072         struct sdhci_host *host;
1073         unsigned long flags;
1074         int present;
1075
1076         host = mmc_priv(mmc);
1077
1078         spin_lock_irqsave(&host->lock, flags);
1079
1080         if (host->flags & SDHCI_DEVICE_DEAD)
1081                 present = 0;
1082         else
1083                 present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
1084
1085         spin_unlock_irqrestore(&host->lock, flags);
1086
1087         return !(present & SDHCI_WRITE_PROTECT);
1088 }
1089
1090 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1091 {
1092         struct sdhci_host *host;
1093         unsigned long flags;
1094         u32 ier;
1095
1096         host = mmc_priv(mmc);
1097
1098         spin_lock_irqsave(&host->lock, flags);
1099
1100         if (host->flags & SDHCI_DEVICE_DEAD)
1101                 goto out;
1102
1103         ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
1104
1105         ier &= ~SDHCI_INT_CARD_INT;
1106         if (enable)
1107                 ier |= SDHCI_INT_CARD_INT;
1108
1109         writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
1110         writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
1111
1112 out:
1113         mmiowb();
1114
1115         spin_unlock_irqrestore(&host->lock, flags);
1116 }
1117
1118 static const struct mmc_host_ops sdhci_ops = {
1119         .request        = sdhci_request,
1120         .set_ios        = sdhci_set_ios,
1121         .get_ro         = sdhci_get_ro,
1122         .enable_sdio_irq = sdhci_enable_sdio_irq,
1123 };
1124
1125 /*****************************************************************************\
1126  *                                                                           *
1127  * Tasklets                                                                  *
1128  *                                                                           *
1129 \*****************************************************************************/
1130
1131 static void sdhci_tasklet_card(unsigned long param)
1132 {
1133         struct sdhci_host *host;
1134         unsigned long flags;
1135
1136         host = (struct sdhci_host*)param;
1137
1138         spin_lock_irqsave(&host->lock, flags);
1139
1140         if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
1141                 if (host->mrq) {
1142                         printk(KERN_ERR "%s: Card removed during transfer!\n",
1143                                 mmc_hostname(host->mmc));
1144                         printk(KERN_ERR "%s: Resetting controller.\n",
1145                                 mmc_hostname(host->mmc));
1146
1147                         sdhci_reset(host, SDHCI_RESET_CMD);
1148                         sdhci_reset(host, SDHCI_RESET_DATA);
1149
1150                         host->mrq->cmd->error = -ENOMEDIUM;
1151                         tasklet_schedule(&host->finish_tasklet);
1152                 }
1153         }
1154
1155         spin_unlock_irqrestore(&host->lock, flags);
1156
1157         mmc_detect_change(host->mmc, msecs_to_jiffies(500));
1158 }
1159
1160 static void sdhci_tasklet_finish(unsigned long param)
1161 {
1162         struct sdhci_host *host;
1163         unsigned long flags;
1164         struct mmc_request *mrq;
1165
1166         host = (struct sdhci_host*)param;
1167
1168         spin_lock_irqsave(&host->lock, flags);
1169
1170         del_timer(&host->timer);
1171
1172         mrq = host->mrq;
1173
1174         /*
1175          * The controller needs a reset of internal state machines
1176          * upon error conditions.
1177          */
1178         if (!(host->flags & SDHCI_DEVICE_DEAD) &&
1179                 (mrq->cmd->error ||
1180                  (mrq->data && (mrq->data->error ||
1181                   (mrq->data->stop && mrq->data->stop->error))) ||
1182                    (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
1183
1184                 /* Some controllers need this kick or reset won't work here */
1185                 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
1186                         unsigned int clock;
1187
1188                         /* This is to force an update */
1189                         clock = host->clock;
1190                         host->clock = 0;
1191                         sdhci_set_clock(host, clock);
1192                 }
1193
1194                 /* Spec says we should do both at the same time, but Ricoh
1195                    controllers do not like that. */
1196                 sdhci_reset(host, SDHCI_RESET_CMD);
1197                 sdhci_reset(host, SDHCI_RESET_DATA);
1198         }
1199
1200         host->mrq = NULL;
1201         host->cmd = NULL;
1202         host->data = NULL;
1203
1204 #ifndef CONFIG_LEDS_CLASS
1205         sdhci_deactivate_led(host);
1206 #endif
1207
1208         mmiowb();
1209         spin_unlock_irqrestore(&host->lock, flags);
1210
1211         mmc_request_done(host->mmc, mrq);
1212 }
1213
1214 static void sdhci_timeout_timer(unsigned long data)
1215 {
1216         struct sdhci_host *host;
1217         unsigned long flags;
1218
1219         host = (struct sdhci_host*)data;
1220
1221         spin_lock_irqsave(&host->lock, flags);
1222
1223         if (host->mrq) {
1224                 printk(KERN_ERR "%s: Timeout waiting for hardware "
1225                         "interrupt.\n", mmc_hostname(host->mmc));
1226                 sdhci_dumpregs(host);
1227
1228                 if (host->data) {
1229                         host->data->error = -ETIMEDOUT;
1230                         sdhci_finish_data(host);
1231                 } else {
1232                         if (host->cmd)
1233                                 host->cmd->error = -ETIMEDOUT;
1234                         else
1235                                 host->mrq->cmd->error = -ETIMEDOUT;
1236
1237                         tasklet_schedule(&host->finish_tasklet);
1238                 }
1239         }
1240
1241         mmiowb();
1242         spin_unlock_irqrestore(&host->lock, flags);
1243 }
1244
1245 /*****************************************************************************\
1246  *                                                                           *
1247  * Interrupt handling                                                        *
1248  *                                                                           *
1249 \*****************************************************************************/
1250
1251 static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
1252 {
1253         BUG_ON(intmask == 0);
1254
1255         if (!host->cmd) {
1256                 printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
1257                         "though no command operation was in progress.\n",
1258                         mmc_hostname(host->mmc), (unsigned)intmask);
1259                 sdhci_dumpregs(host);
1260                 return;
1261         }
1262
1263         if (intmask & SDHCI_INT_TIMEOUT)
1264                 host->cmd->error = -ETIMEDOUT;
1265         else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
1266                         SDHCI_INT_INDEX))
1267                 host->cmd->error = -EILSEQ;
1268
1269         if (host->cmd->error)
1270                 tasklet_schedule(&host->finish_tasklet);
1271         else if (intmask & SDHCI_INT_RESPONSE)
1272                 sdhci_finish_command(host);
1273 }
1274
1275 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
1276 {
1277         BUG_ON(intmask == 0);
1278
1279         if (!host->data) {
1280                 /*
1281                  * A data end interrupt is sent together with the response
1282                  * for the stop command.
1283                  */
1284                 if (intmask & SDHCI_INT_DATA_END)
1285                         return;
1286
1287                 printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
1288                         "though no data operation was in progress.\n",
1289                         mmc_hostname(host->mmc), (unsigned)intmask);
1290                 sdhci_dumpregs(host);
1291
1292                 return;
1293         }
1294
1295         if (intmask & SDHCI_INT_DATA_TIMEOUT)
1296                 host->data->error = -ETIMEDOUT;
1297         else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
1298                 host->data->error = -EILSEQ;
1299         else if (intmask & SDHCI_INT_ADMA_ERROR)
1300                 host->data->error = -EIO;
1301
1302         if (host->data->error)
1303                 sdhci_finish_data(host);
1304         else {
1305                 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
1306                         sdhci_transfer_pio(host);
1307
1308                 /*
1309                  * We currently don't do anything fancy with DMA
1310                  * boundaries, but as we can't disable the feature
1311                  * we need to at least restart the transfer.
1312                  */
1313                 if (intmask & SDHCI_INT_DMA_END)
1314                         writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS),
1315                                 host->ioaddr + SDHCI_DMA_ADDRESS);
1316
1317                 if (intmask & SDHCI_INT_DATA_END) {
1318                         if (host->cmd) {
1319                                 /*
1320                                  * Data managed to finish before the
1321                                  * command completed. Make sure we do
1322                                  * things in the proper order.
1323                                  */
1324                                 host->data_early = 1;
1325                         } else {
1326                                 sdhci_finish_data(host);
1327                         }
1328                 }
1329         }
1330 }
1331
1332 static irqreturn_t sdhci_irq(int irq, void *dev_id)
1333 {
1334         irqreturn_t result;
1335         struct sdhci_host* host = dev_id;
1336         u32 intmask;
1337         int cardint = 0;
1338
1339         spin_lock(&host->lock);
1340
1341         intmask = readl(host->ioaddr + SDHCI_INT_STATUS);
1342
1343         if (!intmask || intmask == 0xffffffff) {
1344                 result = IRQ_NONE;
1345                 goto out;
1346         }
1347
1348         DBG("*** %s got interrupt: 0x%08x\n",
1349                 mmc_hostname(host->mmc), intmask);
1350
1351         if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
1352                 writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
1353                         host->ioaddr + SDHCI_INT_STATUS);
1354                 tasklet_schedule(&host->card_tasklet);
1355         }
1356
1357         intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
1358
1359         if (intmask & SDHCI_INT_CMD_MASK) {
1360                 writel(intmask & SDHCI_INT_CMD_MASK,
1361                         host->ioaddr + SDHCI_INT_STATUS);
1362                 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
1363         }
1364
1365         if (intmask & SDHCI_INT_DATA_MASK) {
1366                 writel(intmask & SDHCI_INT_DATA_MASK,
1367                         host->ioaddr + SDHCI_INT_STATUS);
1368                 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
1369         }
1370
1371         intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
1372
1373         intmask &= ~SDHCI_INT_ERROR;
1374
1375         if (intmask & SDHCI_INT_BUS_POWER) {
1376                 printk(KERN_ERR "%s: Card is consuming too much power!\n",
1377                         mmc_hostname(host->mmc));
1378                 writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
1379         }
1380
1381         intmask &= ~SDHCI_INT_BUS_POWER;
1382
1383         if (intmask & SDHCI_INT_CARD_INT)
1384                 cardint = 1;
1385
1386         intmask &= ~SDHCI_INT_CARD_INT;
1387
1388         if (intmask) {
1389                 printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
1390                         mmc_hostname(host->mmc), intmask);
1391                 sdhci_dumpregs(host);
1392
1393                 writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
1394         }
1395
1396         result = IRQ_HANDLED;
1397
1398         mmiowb();
1399 out:
1400         spin_unlock(&host->lock);
1401
1402         /*
1403          * We have to delay this as it calls back into the driver.
1404          */
1405         if (cardint)
1406                 mmc_signal_sdio_irq(host->mmc);
1407
1408         return result;
1409 }
1410
1411 /*****************************************************************************\
1412  *                                                                           *
1413  * Suspend/resume                                                            *
1414  *                                                                           *
1415 \*****************************************************************************/
1416
1417 #ifdef CONFIG_PM
1418
1419 int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
1420 {
1421         int ret;
1422
1423         ret = mmc_suspend_host(host->mmc, state);
1424         if (ret)
1425                 return ret;
1426
1427         free_irq(host->irq, host);
1428
1429         return 0;
1430 }
1431
1432 EXPORT_SYMBOL_GPL(sdhci_suspend_host);
1433
1434 int sdhci_resume_host(struct sdhci_host *host)
1435 {
1436         int ret;
1437
1438         if (host->flags & SDHCI_USE_DMA) {
1439                 if (host->ops->enable_dma)
1440                         host->ops->enable_dma(host);
1441         }
1442
1443         ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
1444                           mmc_hostname(host->mmc), host);
1445         if (ret)
1446                 return ret;
1447
1448         sdhci_init(host);
1449         mmiowb();
1450
1451         ret = mmc_resume_host(host->mmc);
1452         if (ret)
1453                 return ret;
1454
1455         return 0;
1456 }
1457
1458 EXPORT_SYMBOL_GPL(sdhci_resume_host);
1459
1460 #endif /* CONFIG_PM */
1461
1462 /*****************************************************************************\
1463  *                                                                           *
1464  * Device allocation/registration                                            *
1465  *                                                                           *
1466 \*****************************************************************************/
1467
1468 struct sdhci_host *sdhci_alloc_host(struct device *dev,
1469         size_t priv_size)
1470 {
1471         struct mmc_host *mmc;
1472         struct sdhci_host *host;
1473
1474         WARN_ON(dev == NULL);
1475
1476         mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
1477         if (!mmc)
1478                 return ERR_PTR(-ENOMEM);
1479
1480         host = mmc_priv(mmc);
1481         host->mmc = mmc;
1482
1483         return host;
1484 }
1485
1486 EXPORT_SYMBOL_GPL(sdhci_alloc_host);
1487
1488 int sdhci_add_host(struct sdhci_host *host)
1489 {
1490         struct mmc_host *mmc;
1491         unsigned int caps;
1492         int ret;
1493
1494         WARN_ON(host == NULL);
1495         if (host == NULL)
1496                 return -EINVAL;
1497
1498         mmc = host->mmc;
1499
1500         if (debug_quirks)
1501                 host->quirks = debug_quirks;
1502
1503         sdhci_reset(host, SDHCI_RESET_ALL);
1504
1505         host->version = readw(host->ioaddr + SDHCI_HOST_VERSION);
1506         host->version = (host->version & SDHCI_SPEC_VER_MASK)
1507                                 >> SDHCI_SPEC_VER_SHIFT;
1508         if (host->version > SDHCI_SPEC_200) {
1509                 printk(KERN_ERR "%s: Unknown controller version (%d). "
1510                         "You may experience problems.\n", mmc_hostname(mmc),
1511                         host->version);
1512         }
1513
1514         caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
1515
1516         if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
1517                 host->flags |= SDHCI_USE_DMA;
1518         else if (!(caps & SDHCI_CAN_DO_DMA))
1519                 DBG("Controller doesn't have DMA capability\n");
1520         else
1521                 host->flags |= SDHCI_USE_DMA;
1522
1523         if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
1524                 (host->flags & SDHCI_USE_DMA)) {
1525                 DBG("Disabling DMA as it is marked broken\n");
1526                 host->flags &= ~SDHCI_USE_DMA;
1527         }
1528
1529         if (host->flags & SDHCI_USE_DMA) {
1530                 if ((host->version >= SDHCI_SPEC_200) &&
1531                                 (caps & SDHCI_CAN_DO_ADMA2))
1532                         host->flags |= SDHCI_USE_ADMA;
1533         }
1534
1535         if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
1536                 (host->flags & SDHCI_USE_ADMA)) {
1537                 DBG("Disabling ADMA as it is marked broken\n");
1538                 host->flags &= ~SDHCI_USE_ADMA;
1539         }
1540
1541         if (host->flags & SDHCI_USE_DMA) {
1542                 if (host->ops->enable_dma) {
1543                         if (host->ops->enable_dma(host)) {
1544                                 printk(KERN_WARNING "%s: No suitable DMA "
1545                                         "available. Falling back to PIO.\n",
1546                                         mmc_hostname(mmc));
1547                                 host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA);
1548                         }
1549                 }
1550         }
1551
1552         if (host->flags & SDHCI_USE_ADMA) {
1553                 /*
1554                  * We need to allocate descriptors for all sg entries
1555                  * (128) and potentially one alignment transfer for
1556                  * each of those entries.
1557                  */
1558                 host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
1559                 host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
1560                 if (!host->adma_desc || !host->align_buffer) {
1561                         kfree(host->adma_desc);
1562                         kfree(host->align_buffer);
1563                         printk(KERN_WARNING "%s: Unable to allocate ADMA "
1564                                 "buffers. Falling back to standard DMA.\n",
1565                                 mmc_hostname(mmc));
1566                         host->flags &= ~SDHCI_USE_ADMA;
1567                 }
1568         }
1569
1570         /*
1571          * If we use DMA, then it's up to the caller to set the DMA
1572          * mask, but PIO does not need the hw shim so we set a new
1573          * mask here in that case.
1574          */
1575         if (!(host->flags & SDHCI_USE_DMA)) {
1576                 host->dma_mask = DMA_BIT_MASK(64);
1577                 mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
1578         }
1579
1580         host->max_clk =
1581                 (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
1582         if (host->max_clk == 0) {
1583                 printk(KERN_ERR "%s: Hardware doesn't specify base clock "
1584                         "frequency.\n", mmc_hostname(mmc));
1585                 return -ENODEV;
1586         }
1587         host->max_clk *= 1000000;
1588
1589         host->timeout_clk =
1590                 (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
1591         if (host->timeout_clk == 0) {
1592                 printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
1593                         "frequency.\n", mmc_hostname(mmc));
1594                 return -ENODEV;
1595         }
1596         if (caps & SDHCI_TIMEOUT_CLK_UNIT)
1597                 host->timeout_clk *= 1000;
1598
1599         /*
1600          * Set host parameters.
1601          */
1602         mmc->ops = &sdhci_ops;
1603         mmc->f_min = host->max_clk / 256;
1604         mmc->f_max = host->max_clk;
1605         mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1606
1607         if (caps & SDHCI_CAN_DO_HISPD)
1608                 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
1609
1610         mmc->ocr_avail = 0;
1611         if (caps & SDHCI_CAN_VDD_330)
1612                 mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
1613         if (caps & SDHCI_CAN_VDD_300)
1614                 mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
1615         if (caps & SDHCI_CAN_VDD_180)
1616                 mmc->ocr_avail |= MMC_VDD_165_195;
1617
1618         if (mmc->ocr_avail == 0) {
1619                 printk(KERN_ERR "%s: Hardware doesn't report any "
1620                         "support voltages.\n", mmc_hostname(mmc));
1621                 return -ENODEV;
1622         }
1623
1624         spin_lock_init(&host->lock);
1625
1626         /*
1627          * Maximum number of segments. Depends on if the hardware
1628          * can do scatter/gather or not.
1629          */
1630         if (host->flags & SDHCI_USE_ADMA)
1631                 mmc->max_hw_segs = 128;
1632         else if (host->flags & SDHCI_USE_DMA)
1633                 mmc->max_hw_segs = 1;
1634         else /* PIO */
1635                 mmc->max_hw_segs = 128;
1636         mmc->max_phys_segs = 128;
1637
1638         /*
1639          * Maximum number of sectors in one transfer. Limited by DMA boundary
1640          * size (512KiB).
1641          */
1642         mmc->max_req_size = 524288;
1643
1644         /*
1645          * Maximum segment size. Could be one segment with the maximum number
1646          * of bytes. When doing hardware scatter/gather, each entry cannot
1647          * be larger than 64 KiB though.
1648          */
1649         if (host->flags & SDHCI_USE_ADMA)
1650                 mmc->max_seg_size = 65536;
1651         else
1652                 mmc->max_seg_size = mmc->max_req_size;
1653
1654         /*
1655          * Maximum block size. This varies from controller to controller and
1656          * is specified in the capabilities register.
1657          */
1658         mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
1659         if (mmc->max_blk_size >= 3) {
1660                 printk(KERN_WARNING "%s: Invalid maximum block size, "
1661                         "assuming 512 bytes\n", mmc_hostname(mmc));
1662                 mmc->max_blk_size = 512;
1663         } else
1664                 mmc->max_blk_size = 512 << mmc->max_blk_size;
1665
1666         /*
1667          * Maximum block count.
1668          */
1669         mmc->max_blk_count = 65535;
1670
1671         /*
1672          * Init tasklets.
1673          */
1674         tasklet_init(&host->card_tasklet,
1675                 sdhci_tasklet_card, (unsigned long)host);
1676         tasklet_init(&host->finish_tasklet,
1677                 sdhci_tasklet_finish, (unsigned long)host);
1678
1679         setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
1680
1681         ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
1682                 mmc_hostname(mmc), host);
1683         if (ret)
1684                 goto untasklet;
1685
1686         sdhci_init(host);
1687
1688 #ifdef CONFIG_MMC_DEBUG
1689         sdhci_dumpregs(host);
1690 #endif
1691
1692 #ifdef CONFIG_LEDS_CLASS
1693         host->led.name = mmc_hostname(mmc);
1694         host->led.brightness = LED_OFF;
1695         host->led.default_trigger = mmc_hostname(mmc);
1696         host->led.brightness_set = sdhci_led_control;
1697
1698         ret = led_classdev_register(mmc_dev(mmc), &host->led);
1699         if (ret)
1700                 goto reset;
1701 #endif
1702
1703         mmiowb();
1704
1705         mmc_add_host(mmc);
1706
1707         printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
1708                 mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id,
1709                 (host->flags & SDHCI_USE_ADMA)?"A":"",
1710                 (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
1711
1712         return 0;
1713
1714 #ifdef CONFIG_LEDS_CLASS
1715 reset:
1716         sdhci_reset(host, SDHCI_RESET_ALL);
1717         free_irq(host->irq, host);
1718 #endif
1719 untasklet:
1720         tasklet_kill(&host->card_tasklet);
1721         tasklet_kill(&host->finish_tasklet);
1722
1723         return ret;
1724 }
1725
1726 EXPORT_SYMBOL_GPL(sdhci_add_host);
1727
1728 void sdhci_remove_host(struct sdhci_host *host, int dead)
1729 {
1730         unsigned long flags;
1731
1732         if (dead) {
1733                 spin_lock_irqsave(&host->lock, flags);
1734
1735                 host->flags |= SDHCI_DEVICE_DEAD;
1736
1737                 if (host->mrq) {
1738                         printk(KERN_ERR "%s: Controller removed during "
1739                                 " transfer!\n", mmc_hostname(host->mmc));
1740
1741                         host->mrq->cmd->error = -ENOMEDIUM;
1742                         tasklet_schedule(&host->finish_tasklet);
1743                 }
1744
1745                 spin_unlock_irqrestore(&host->lock, flags);
1746         }
1747
1748         mmc_remove_host(host->mmc);
1749
1750 #ifdef CONFIG_LEDS_CLASS
1751         led_classdev_unregister(&host->led);
1752 #endif
1753
1754         if (!dead)
1755                 sdhci_reset(host, SDHCI_RESET_ALL);
1756
1757         free_irq(host->irq, host);
1758
1759         del_timer_sync(&host->timer);
1760
1761         tasklet_kill(&host->card_tasklet);
1762         tasklet_kill(&host->finish_tasklet);
1763
1764         kfree(host->adma_desc);
1765         kfree(host->align_buffer);
1766
1767         host->adma_desc = NULL;
1768         host->align_buffer = NULL;
1769 }
1770
1771 EXPORT_SYMBOL_GPL(sdhci_remove_host);
1772
1773 void sdhci_free_host(struct sdhci_host *host)
1774 {
1775         mmc_free_host(host->mmc);
1776 }
1777
1778 EXPORT_SYMBOL_GPL(sdhci_free_host);
1779
1780 /*****************************************************************************\
1781  *                                                                           *
1782  * Driver init/exit                                                          *
1783  *                                                                           *
1784 \*****************************************************************************/
1785
1786 static int __init sdhci_drv_init(void)
1787 {
1788         printk(KERN_INFO DRIVER_NAME
1789                 ": Secure Digital Host Controller Interface driver\n");
1790         printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
1791
1792         return 0;
1793 }
1794
1795 static void __exit sdhci_drv_exit(void)
1796 {
1797 }
1798
1799 module_init(sdhci_drv_init);
1800 module_exit(sdhci_drv_exit);
1801
1802 module_param(debug_quirks, uint, 0444);
1803
1804 MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
1805 MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
1806 MODULE_LICENSE("GPL");
1807
1808 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");