2 * include/asm-x86_64/i387.h
4 * Copyright (C) 1994 Linus Torvalds
6 * Pentium III FXSR, SSE support
7 * General FPU state handling cleanups
8 * Gareth Hughes <gareth@valinux.com>, May 2000
9 * x86-64 work by Andi Kleen 2002
12 #ifndef __ASM_X86_64_I387_H
13 #define __ASM_X86_64_I387_H
15 #include <linux/sched.h>
16 #include <asm/processor.h>
17 #include <asm/sigcontext.h>
19 #include <asm/thread_info.h>
20 #include <asm/uaccess.h>
22 extern void fpu_init(void);
23 extern unsigned int mxcsr_feature_mask;
24 extern void mxcsr_feature_mask_init(void);
25 extern void init_fpu(struct task_struct *child);
26 extern int save_i387(struct _fpstate __user *buf);
27 extern asmlinkage void math_state_restore(void);
30 * FPU lazy state save handling...
33 #define unlazy_fpu(tsk) do { \
34 if (task_thread_info(tsk)->status & TS_USEDFPU) \
37 tsk->fpu_counter = 0; \
40 /* Ignore delayed exceptions from user space */
41 static inline void tolerant_fwait(void)
43 asm volatile("1: fwait\n"
45 " .section __ex_table,\"a\"\n"
51 #define clear_fpu(tsk) do { \
52 if (task_thread_info(tsk)->status & TS_USEDFPU) { \
54 task_thread_info(tsk)->status &= ~TS_USEDFPU; \
60 * ptrace request handers...
62 extern int get_fpregs(struct user_i387_struct __user *buf,
63 struct task_struct *tsk);
64 extern int set_fpregs(struct task_struct *tsk,
65 struct user_i387_struct __user *buf);
68 * i387 state interaction
70 #define get_fpu_mxcsr(t) ((t)->thread.i387.fxsave.mxcsr)
71 #define get_fpu_cwd(t) ((t)->thread.i387.fxsave.cwd)
72 #define get_fpu_fxsr_twd(t) ((t)->thread.i387.fxsave.twd)
73 #define get_fpu_swd(t) ((t)->thread.i387.fxsave.swd)
74 #define set_fpu_cwd(t,val) ((t)->thread.i387.fxsave.cwd = (val))
75 #define set_fpu_swd(t,val) ((t)->thread.i387.fxsave.swd = (val))
76 #define set_fpu_fxsr_twd(t,val) ((t)->thread.i387.fxsave.twd = (val))
78 #define X87_FSW_ES (1 << 7) /* Exception Summary */
80 /* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
81 is pending. Clear the x87 state here by setting it to fixed
82 values. The kernel data segment can be sometimes 0 and sometimes
83 new user value. Both should be ok.
84 Use the PDA as safe address because it should be already in L1. */
85 static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
87 if (unlikely(fx->swd & X87_FSW_ES))
88 asm volatile("fnclex");
89 alternative_input(ASM_NOP8 ASM_NOP2,
90 " emms\n" /* clear stack tags */
91 " fildl %%gs:0", /* load to clear state */
92 X86_FEATURE_FXSAVE_LEAK);
95 static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
99 asm volatile("1: rex64/fxrstor (%[fx])\n\t"
101 ".section .fixup,\"ax\"\n"
102 "3: movl $-1,%[err]\n"
105 ".section __ex_table,\"a\"\n"
110 #if 0 /* See comment in __fxsave_clear() below. */
111 : [fx] "r" (fx), "m" (*fx), "0" (0));
113 : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
120 static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
124 asm volatile("1: rex64/fxsave (%[fx])\n\t"
126 ".section .fixup,\"ax\"\n"
127 "3: movl $-1,%[err]\n"
130 ".section __ex_table,\"a\"\n"
134 : [err] "=r" (err), "=m" (*fx)
135 #if 0 /* See comment in __fxsave_clear() below. */
136 : [fx] "r" (fx), "0" (0));
138 : [fx] "cdaSDb" (fx), "0" (0));
140 if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
142 /* No need to clear here because the caller clears USED_MATH */
146 static inline void __fxsave_clear(struct task_struct *tsk)
148 /* Using "rex64; fxsave %0" is broken because, if the memory operand
149 uses any extended registers for addressing, a second REX prefix
150 will be generated (to the assembler, rex64 followed by semicolon
151 is a separate instruction), and hence the 64-bitness is lost. */
153 /* Using "fxsaveq %0" would be the ideal choice, but is only supported
154 starting with gas 2.16. */
155 __asm__ __volatile__("fxsaveq %0"
156 : "=m" (tsk->thread.i387.fxsave));
158 /* Using, as a workaround, the properly prefixed form below isn't
159 accepted by any binutils version so far released, complaining that
160 the same type of prefix is used twice if an extended register is
161 needed for addressing (fix submitted to mainline 2005-11-21). */
162 __asm__ __volatile__("rex64/fxsave %0"
163 : "=m" (tsk->thread.i387.fxsave));
165 /* This, however, we can work around by forcing the compiler to select
166 an addressing mode that doesn't require extended registers. */
167 __asm__ __volatile__("rex64/fxsave %P2(%1)"
168 : "=m" (tsk->thread.i387.fxsave)
170 "i" (offsetof(__typeof__(*tsk),
171 thread.i387.fxsave)));
173 clear_fpu_state(&tsk->thread.i387.fxsave);
176 static inline void kernel_fpu_begin(void)
178 struct thread_info *me = current_thread_info();
180 if (me->status & TS_USEDFPU) {
181 __fxsave_clear(me->task);
182 me->status &= ~TS_USEDFPU;
188 static inline void kernel_fpu_end(void)
194 static inline void save_init_fpu(struct task_struct *tsk)
197 task_thread_info(tsk)->status &= ~TS_USEDFPU;
202 * This restores directly out of user space. Exceptions are handled.
204 static inline int restore_i387(struct _fpstate __user *buf)
206 return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
209 #endif /* __ASM_X86_64_I387_H */