git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/boot/dts/tqm5200.dts

   1 /*
   2  * TQM5200 board Device Tree Source
   3  *
   4  * Copyright (C) 2007 Semihalf
   5  * Marian Balakowicz <m8@semihalf.com>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /dts-v1/;
  14
  15 / {
  16         model = "tqc,tqm5200";
  17         compatible = "tqc,tqm5200";
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20
  21         cpus {
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 PowerPC,5200@0 {
  26                         device_type = "cpu";
  27                         reg = <0>;
  28                         d-cache-line-size = <32>;
  29                         i-cache-line-size = <32>;
  30                         d-cache-size = <0x4000>;        // L1, 16K
  31                         i-cache-size = <0x4000>;        // L1, 16K
  32                         timebase-frequency = <0>;       // from bootloader
  33                         bus-frequency = <0>;            // from bootloader
  34                         clock-frequency = <0>;          // from bootloader
  35                 };
  36         };
  37
  38         memory {
  39                 device_type = "memory";
  40                 reg = <0x00000000 0x04000000>;  // 64MB
  41         };
  42
  43         soc5200@f0000000 {
  44                 #address-cells = <1>;
  45                 #size-cells = <1>;
  46                 compatible = "fsl,mpc5200-immr";
  47                 ranges = <0 0xf0000000 0x0000c000>;
  48                 reg = <0xf0000000 0x00000100>;
  49                 bus-frequency = <0>;            // from bootloader
  50                 system-frequency = <0>;         // from bootloader
  51
  52                 cdm@200 {
  53                         compatible = "fsl,mpc5200-cdm";
  54                         reg = <0x200 0x38>;
  55                 };
  56
  57                 mpc5200_pic: interrupt-controller@500 {
  58                         // 5200 interrupts are encoded into two levels;
  59                         interrupt-controller;
  60                         #interrupt-cells = <3>;
  61                         compatible = "fsl,mpc5200-pic";
  62                         reg = <0x500 0x80>;
  63                 };
  64
  65                 timer@600 {     // General Purpose Timer
  66                         compatible = "fsl,mpc5200-gpt";
  67                         reg = <0x600 0x10>;
  68                         interrupts = <1 9 0>;
  69                         interrupt-parent = <&mpc5200_pic>;
  70                         fsl,has-wdt;
  71                 };
  72
  73                 gpio@b00 {
  74                         compatible = "fsl,mpc5200-gpio";
  75                         reg = <0xb00 0x40>;
  76                         interrupts = <1 7 0>;
  77                         interrupt-parent = <&mpc5200_pic>;
  78                 };
  79
  80                 usb@1000 {
  81                         compatible = "fsl,mpc5200-ohci","ohci-be";
  82                         reg = <0x1000 0xff>;
  83                         interrupts = <2 6 0>;
  84                         interrupt-parent = <&mpc5200_pic>;
  85                 };
  86
  87                 dma-controller@1200 {
  88                         compatible = "fsl,mpc5200-bestcomm";
  89                         reg = <0x1200 0x80>;
  90                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
  91                                       3 4 0  3 5 0  3 6 0  3 7 0
  92                                       3 8 0  3 9 0  3 10 0  3 11 0
  93                                       3 12 0  3 13 0  3 14 0  3 15 0>;
  94                         interrupt-parent = <&mpc5200_pic>;
  95                 };
  96
  97                 xlb@1f00 {
  98                         compatible = "fsl,mpc5200-xlb";
  99                         reg = <0x1f00 0x100>;
 100                 };
 101
 102                 serial@2000 {           // PSC1
 103                         device_type = "serial";
 104                         compatible = "fsl,mpc5200-psc-uart";
 105                         port-number = <0>;  // Logical port assignment
 106                         reg = <0x2000 0x100>;
 107                         interrupts = <2 1 0>;
 108                         interrupt-parent = <&mpc5200_pic>;
 109                 };
 110
 111                 serial@2200 {           // PSC2
 112                         device_type = "serial";
 113                         compatible = "fsl,mpc5200-psc-uart";
 114                         port-number = <1>;  // Logical port assignment
 115                         reg = <0x2200 0x100>;
 116                         interrupts = <2 2 0>;
 117                         interrupt-parent = <&mpc5200_pic>;
 118                 };
 119
 120                 serial@2400 {           // PSC3
 121                         device_type = "serial";
 122                         compatible = "fsl,mpc5200-psc-uart";
 123                         port-number = <2>;  // Logical port assignment
 124                         reg = <0x2400 0x100>;
 125                         interrupts = <2 3 0>;
 126                         interrupt-parent = <&mpc5200_pic>;
 127                 };
 128
 129                 ethernet@3000 {
 130                         device_type = "network";
 131                         compatible = "fsl,mpc5200-fec";
 132                         reg = <0x3000 0x400>;
 133                         local-mac-address = [ 00 00 00 00 00 00 ];
 134                         interrupts = <2 5 0>;
 135                         interrupt-parent = <&mpc5200_pic>;
 136                         phy-handle = <&phy0>;
 137                 };
 138
 139                 mdio@3000 {
 140                         #address-cells = <1>;
 141                         #size-cells = <0>;
 142                         compatible = "fsl,mpc5200-mdio";
 143                         reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
 144                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 145                         interrupt-parent = <&mpc5200_pic>;
 146
 147                         phy0: ethernet-phy@0 {
 148                                 device_type = "ethernet-phy";
 149                                 reg = <0>;
 150                         };
 151                 };
 152
 153                 ata@3a00 {
 154                         compatible = "fsl,mpc5200-ata";
 155                         reg = <0x3a00 0x100>;
 156                         interrupts = <2 7 0>;
 157                         interrupt-parent = <&mpc5200_pic>;
 158                 };
 159
 160                 i2c@3d40 {
 161                         #address-cells = <1>;
 162                         #size-cells = <0>;
 163                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
 164                         reg = <0x3d40 0x40>;
 165                         interrupts = <2 16 0>;
 166                         interrupt-parent = <&mpc5200_pic>;
 167                         fsl5200-clocking;
 168
 169                          rtc@68 {
 170                                 device_type = "rtc";
 171                                 compatible = "dallas,ds1307";
 172                                 reg = <0x68>;
 173                         };
 174                 };
 175
 176                 sram@8000 {
 177                         compatible = "fsl,mpc5200-sram";
 178                         reg = <0x8000 0x4000>;
 179                 };
 180         };
 181
 182         lpb {
 183                 model = "fsl,lpb";
 184                 compatible = "fsl,lpb";
 185                 #address-cells = <2>;
 186                 #size-cells = <1>;
 187                 ranges = <0 0 0xfc000000 0x02000000>;
 188
 189                 flash@0,0 {
 190                         compatible = "cfi-flash";
 191                         reg = <0 0 0x02000000>;
 192                         bank-width = <4>;
 193                         device-width = <2>;
 194                         #size-cells = <1>;
 195                         #address-cells = <1>;
 196                 };
 197         };
 198
 199         pci@f0000d00 {
 200                 #interrupt-cells = <1>;
 201                 #size-cells = <2>;
 202                 #address-cells = <3>;
 203                 device_type = "pci";
 204                 compatible = "fsl,mpc5200-pci";
 205                 reg = <0xf0000d00 0x100>;
 206                 interrupt-map-mask = <0xf800 0 0 7>;
 207                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
 208                                  0xc000 0 0 2 &mpc5200_pic 0 0 3
 209                                  0xc000 0 0 3 &mpc5200_pic 0 0 3
 210                                  0xc000 0 0 4 &mpc5200_pic 0 0 3>;
 211                 clock-frequency = <0>; // From boot loader
 212                 interrupts = <2 8 0 2 9 0 2 10 0>;
 213                 interrupt-parent = <&mpc5200_pic>;
 214                 bus-range = <0 0>;
 215                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
 216                           0x02000000 0 0x90000000 0x90000000 0 0x10000000
 217                           0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 218         };
 219 };