git.oblomov.eu Git - linux-2.6/blob - drivers/pci/hotplug/ibmphp_hpc.c

   1 /*
   2  * IBM Hot Plug Controller Driver
   3  *
   4  * Written By: Jyoti Shah, IBM Corporation
   5  *
   6  * Copyright (C) 2001-2003 IBM Corp.
   7  *
   8  * All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or (at
  13  * your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  18  * NON INFRINGEMENT.  See the GNU General Public License for more
  19  * details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Send feedback to <gregkh@us.ibm.com>
  26  *                  <jshah@us.ibm.com>
  27  *
  28  */
  29
  30 #include <linux/wait.h>
  31 #include <linux/time.h>
  32 #include <linux/delay.h>
  33 #include <linux/module.h>
  34 #include <linux/pci.h>
  35 #include <linux/init.h>
  36 #include <linux/mutex.h>
  37 #include <linux/sched.h>
  38 #include <linux/kthread.h>
  39 #include "ibmphp.h"
  40
  41 static int to_debug = 0;
  42 #define debug_polling(fmt, arg...)      do { if (to_debug) debug (fmt, arg); } while (0)
  43
  44 //----------------------------------------------------------------------------
  45 // timeout values
  46 //----------------------------------------------------------------------------
  47 #define CMD_COMPLETE_TOUT_SEC   60      // give HPC 60 sec to finish cmd
  48 #define HPC_CTLR_WORKING_TOUT   60      // give HPC 60 sec to finish cmd
  49 #define HPC_GETACCESS_TIMEOUT   60      // seconds
  50 #define POLL_INTERVAL_SEC       2       // poll HPC every 2 seconds
  51 #define POLL_LATCH_CNT          5       // poll latch 5 times, then poll slots
  52
  53 //----------------------------------------------------------------------------
  54 // Winnipeg Architected Register Offsets
  55 //----------------------------------------------------------------------------
  56 #define WPG_I2CMBUFL_OFFSET     0x08    // I2C Message Buffer Low
  57 #define WPG_I2CMOSUP_OFFSET     0x10    // I2C Master Operation Setup Reg
  58 #define WPG_I2CMCNTL_OFFSET     0x20    // I2C Master Control Register
  59 #define WPG_I2CPARM_OFFSET      0x40    // I2C Parameter Register
  60 #define WPG_I2CSTAT_OFFSET      0x70    // I2C Status Register
  61
  62 //----------------------------------------------------------------------------
  63 // Winnipeg Store Type commands (Add this commands to the register offset)
  64 //----------------------------------------------------------------------------
  65 #define WPG_I2C_AND             0x1000  // I2C AND operation
  66 #define WPG_I2C_OR              0x2000  // I2C OR operation
  67
  68 //----------------------------------------------------------------------------
  69 // Command set for I2C Master Operation Setup Register
  70 //----------------------------------------------------------------------------
  71 #define WPG_READATADDR_MASK     0x00010000      // read,bytes,I2C shifted,index
  72 #define WPG_WRITEATADDR_MASK    0x40010000      // write,bytes,I2C shifted,index
  73 #define WPG_READDIRECT_MASK     0x10010000
  74 #define WPG_WRITEDIRECT_MASK    0x60010000
  75
  76
  77 //----------------------------------------------------------------------------
  78 // bit masks for I2C Master Control Register
  79 //----------------------------------------------------------------------------
  80 #define WPG_I2CMCNTL_STARTOP_MASK       0x00000002      // Start the Operation
  81
  82 //----------------------------------------------------------------------------
  83 //
  84 //----------------------------------------------------------------------------
  85 #define WPG_I2C_IOREMAP_SIZE    0x2044  // size of linear address interval
  86
  87 //----------------------------------------------------------------------------
  88 // command index
  89 //----------------------------------------------------------------------------
  90 #define WPG_1ST_SLOT_INDEX      0x01    // index - 1st slot for ctlr
  91 #define WPG_CTLR_INDEX          0x0F    // index - ctlr
  92 #define WPG_1ST_EXTSLOT_INDEX   0x10    // index - 1st ext slot for ctlr
  93 #define WPG_1ST_BUS_INDEX       0x1F    // index - 1st bus for ctlr
  94
  95 //----------------------------------------------------------------------------
  96 // macro utilities
  97 //----------------------------------------------------------------------------
  98 // if bits 20,22,25,26,27,29,30 are OFF return 1
  99 #define HPC_I2CSTATUS_CHECK(s)  ((u8)((s & 0x00000A76) ? 0 : 1))
 100
 101 //----------------------------------------------------------------------------
 102 // global variables
 103 //----------------------------------------------------------------------------
 104 static struct mutex sem_hpcaccess;      // lock access to HPC
 105 static struct semaphore semOperations;  // lock all operations and
 106                                         // access to data structures
 107 static struct semaphore sem_exit;       // make sure polling thread goes away
 108 static struct task_struct *ibmphp_poll_thread;
 109 //----------------------------------------------------------------------------
 110 // local function prototypes
 111 //----------------------------------------------------------------------------
 112 static u8 i2c_ctrl_read (struct controller *, void __iomem *, u8);
 113 static u8 i2c_ctrl_write (struct controller *, void __iomem *, u8, u8);
 114 static u8 hpc_writecmdtoindex (u8, u8);
 115 static u8 hpc_readcmdtoindex (u8, u8);
 116 static void get_hpc_access (void);
 117 static void free_hpc_access (void);
 118 static int poll_hpc(void *data);
 119 static int process_changeinstatus (struct slot *, struct slot *);
 120 static int process_changeinlatch (u8, u8, struct controller *);
 121 static int hpc_wait_ctlr_notworking (int, struct controller *, void __iomem *, u8 *);
 122 //----------------------------------------------------------------------------
 123
 124
 125 /*----------------------------------------------------------------------
 126 * Name:    ibmphp_hpc_initvars
 127 *
 128 * Action:  initialize semaphores and variables
 129 *---------------------------------------------------------------------*/
 130 void __init ibmphp_hpc_initvars (void)
 131 {
 132         debug ("%s - Entry\n", __func__);
 133
 134         mutex_init(&sem_hpcaccess);
 135         init_MUTEX (&semOperations);
 136         init_MUTEX_LOCKED (&sem_exit);
 137         to_debug = 0;
 138
 139         debug ("%s - Exit\n", __func__);
 140 }
 141
 142 /*----------------------------------------------------------------------
 143 * Name:    i2c_ctrl_read
 144 *
 145 * Action:  read from HPC over I2C
 146 *
 147 *---------------------------------------------------------------------*/
 148 static u8 i2c_ctrl_read (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
 149 {
 150         u8 status;
 151         int i;
 152         void __iomem *wpg_addr; // base addr + offset
 153         unsigned long wpg_data; // data to/from WPG LOHI format
 154         unsigned long ultemp;
 155         unsigned long data;     // actual data HILO format
 156
 157         debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __func__, WPGBbar, index);
 158
 159         //--------------------------------------------------------------------
 160         // READ - step 1
 161         // read at address, byte length, I2C address (shifted), index
 162         // or read direct, byte length, index
 163         if (ctlr_ptr->ctlr_type == 0x02) {
 164                 data = WPG_READATADDR_MASK;
 165                 // fill in I2C address
 166                 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
 167                 ultemp = ultemp >> 1;
 168                 data |= (ultemp << 8);
 169
 170                 // fill in index
 171                 data |= (unsigned long)index;
 172         } else if (ctlr_ptr->ctlr_type == 0x04) {
 173                 data = WPG_READDIRECT_MASK;
 174
 175                 // fill in index
 176                 ultemp = (unsigned long)index;
 177                 ultemp = ultemp << 8;
 178                 data |= ultemp;
 179         } else {
 180                 err ("this controller type is not supported \n");
 181                 return HPC_ERROR;
 182         }
 183
 184         wpg_data = swab32 (data);       // swap data before writing
 185         wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
 186         writel (wpg_data, wpg_addr);
 187
 188         //--------------------------------------------------------------------
 189         // READ - step 2 : clear the message buffer
 190         data = 0x00000000;
 191         wpg_data = swab32 (data);
 192         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 193         writel (wpg_data, wpg_addr);
 194
 195         //--------------------------------------------------------------------
 196         // READ - step 3 : issue start operation, I2C master control bit 30:ON
 197         //                 2020 : [20] OR operation at [20] offset 0x20
 198         data = WPG_I2CMCNTL_STARTOP_MASK;
 199         wpg_data = swab32 (data);
 200         wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
 201         writel (wpg_data, wpg_addr);
 202
 203         //--------------------------------------------------------------------
 204         // READ - step 4 : wait until start operation bit clears
 205         i = CMD_COMPLETE_TOUT_SEC;
 206         while (i) {
 207                 msleep(10);
 208                 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
 209                 wpg_data = readl (wpg_addr);
 210                 data = swab32 (wpg_data);
 211                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
 212                         break;
 213                 i--;
 214         }
 215         if (i == 0) {
 216                 debug ("%s - Error : WPG timeout\n", __func__);
 217                 return HPC_ERROR;
 218         }
 219         //--------------------------------------------------------------------
 220         // READ - step 5 : read I2C status register
 221         i = CMD_COMPLETE_TOUT_SEC;
 222         while (i) {
 223                 msleep(10);
 224                 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
 225                 wpg_data = readl (wpg_addr);
 226                 data = swab32 (wpg_data);
 227                 if (HPC_I2CSTATUS_CHECK (data))
 228                         break;
 229                 i--;
 230         }
 231         if (i == 0) {
 232                 debug ("ctrl_read - Exit Error:I2C timeout\n");
 233                 return HPC_ERROR;
 234         }
 235
 236         //--------------------------------------------------------------------
 237         // READ - step 6 : get DATA
 238         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 239         wpg_data = readl (wpg_addr);
 240         data = swab32 (wpg_data);
 241
 242         status = (u8) data;
 243
 244         debug_polling ("%s - Exit index[%x] status[%x]\n", __func__, index, status);
 245
 246         return (status);
 247 }
 248
 249 /*----------------------------------------------------------------------
 250 * Name:    i2c_ctrl_write
 251 *
 252 * Action:  write to HPC over I2C
 253 *
 254 * Return   0 or error codes
 255 *---------------------------------------------------------------------*/
 256 static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
 257 {
 258         u8 rc;
 259         void __iomem *wpg_addr; // base addr + offset
 260         unsigned long wpg_data; // data to/from WPG LOHI format
 261         unsigned long ultemp;
 262         unsigned long data;     // actual data HILO format
 263         int i;
 264
 265         debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __func__, WPGBbar, index, cmd);
 266
 267         rc = 0;
 268         //--------------------------------------------------------------------
 269         // WRITE - step 1
 270         // write at address, byte length, I2C address (shifted), index
 271         // or write direct, byte length, index
 272         data = 0x00000000;
 273
 274         if (ctlr_ptr->ctlr_type == 0x02) {
 275                 data = WPG_WRITEATADDR_MASK;
 276                 // fill in I2C address
 277                 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
 278                 ultemp = ultemp >> 1;
 279                 data |= (ultemp << 8);
 280
 281                 // fill in index
 282                 data |= (unsigned long)index;
 283         } else if (ctlr_ptr->ctlr_type == 0x04) {
 284                 data = WPG_WRITEDIRECT_MASK;
 285
 286                 // fill in index
 287                 ultemp = (unsigned long)index;
 288                 ultemp = ultemp << 8;
 289                 data |= ultemp;
 290         } else {
 291                 err ("this controller type is not supported \n");
 292                 return HPC_ERROR;
 293         }
 294
 295         wpg_data = swab32 (data);       // swap data before writing
 296         wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
 297         writel (wpg_data, wpg_addr);
 298
 299         //--------------------------------------------------------------------
 300         // WRITE - step 2 : clear the message buffer
 301         data = 0x00000000 | (unsigned long)cmd;
 302         wpg_data = swab32 (data);
 303         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 304         writel (wpg_data, wpg_addr);
 305
 306         //--------------------------------------------------------------------
 307         // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
 308         //                 2020 : [20] OR operation at [20] offset 0x20
 309         data = WPG_I2CMCNTL_STARTOP_MASK;
 310         wpg_data = swab32 (data);
 311         wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
 312         writel (wpg_data, wpg_addr);
 313
 314         //--------------------------------------------------------------------
 315         // WRITE - step 4 : wait until start operation bit clears
 316         i = CMD_COMPLETE_TOUT_SEC;
 317         while (i) {
 318                 msleep(10);
 319                 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
 320                 wpg_data = readl (wpg_addr);
 321                 data = swab32 (wpg_data);
 322                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
 323                         break;
 324                 i--;
 325         }
 326         if (i == 0) {
 327                 debug ("%s - Exit Error:WPG timeout\n", __func__);
 328                 rc = HPC_ERROR;
 329         }
 330
 331         //--------------------------------------------------------------------
 332         // WRITE - step 5 : read I2C status register
 333         i = CMD_COMPLETE_TOUT_SEC;
 334         while (i) {
 335                 msleep(10);
 336                 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
 337                 wpg_data = readl (wpg_addr);
 338                 data = swab32 (wpg_data);
 339                 if (HPC_I2CSTATUS_CHECK (data))
 340                         break;
 341                 i--;
 342         }
 343         if (i == 0) {
 344                 debug ("ctrl_read - Error : I2C timeout\n");
 345                 rc = HPC_ERROR;
 346         }
 347
 348         debug_polling ("%s Exit rc[%x]\n", __func__, rc);
 349         return (rc);
 350 }
 351
 352 //------------------------------------------------------------
 353 //  Read from ISA type HPC
 354 //------------------------------------------------------------
 355 static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
 356 {
 357         u16 start_address;
 358         u16 end_address;
 359         u8 data;
 360
 361         start_address = ctlr_ptr->u.isa_ctlr.io_start;
 362         end_address = ctlr_ptr->u.isa_ctlr.io_end;
 363         data = inb (start_address + offset);
 364         return data;
 365 }
 366
 367 //--------------------------------------------------------------
 368 // Write to ISA type HPC
 369 //--------------------------------------------------------------
 370 static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
 371 {
 372         u16 start_address;
 373         u16 port_address;
 374
 375         start_address = ctlr_ptr->u.isa_ctlr.io_start;
 376         port_address = start_address + (u16) offset;
 377         outb (data, port_address);
 378 }
 379
 380 static u8 pci_ctrl_read (struct controller *ctrl, u8 offset)
 381 {
 382         u8 data = 0x00;
 383         debug ("inside pci_ctrl_read\n");
 384         if (ctrl->ctrl_dev)
 385                 pci_read_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
 386         return data;
 387 }
 388
 389 static u8 pci_ctrl_write (struct controller *ctrl, u8 offset, u8 data)
 390 {
 391         u8 rc = -ENODEV;
 392         debug ("inside pci_ctrl_write\n");
 393         if (ctrl->ctrl_dev) {
 394                 pci_write_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
 395                 rc = 0;
 396         }
 397         return rc;
 398 }
 399
 400 static u8 ctrl_read (struct controller *ctlr, void __iomem *base, u8 offset)
 401 {
 402         u8 rc;
 403         switch (ctlr->ctlr_type) {
 404         case 0:
 405                 rc = isa_ctrl_read (ctlr, offset);
 406                 break;
 407         case 1:
 408                 rc = pci_ctrl_read (ctlr, offset);
 409                 break;
 410         case 2:
 411         case 4:
 412                 rc = i2c_ctrl_read (ctlr, base, offset);
 413                 break;
 414         default:
 415                 return -ENODEV;
 416         }
 417         return rc;
 418 }
 419
 420 static u8 ctrl_write (struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
 421 {
 422         u8 rc = 0;
 423         switch (ctlr->ctlr_type) {
 424         case 0:
 425                 isa_ctrl_write(ctlr, offset, data);
 426                 break;
 427         case 1:
 428                 rc = pci_ctrl_write (ctlr, offset, data);
 429                 break;
 430         case 2:
 431         case 4:
 432                 rc = i2c_ctrl_write(ctlr, base, offset, data);
 433                 break;
 434         default:
 435                 return -ENODEV;
 436         }
 437         return rc;
 438 }
 439 /*----------------------------------------------------------------------
 440 * Name:    hpc_writecmdtoindex()
 441 *
 442 * Action:  convert a write command to proper index within a controller
 443 *
 444 * Return   index, HPC_ERROR
 445 *---------------------------------------------------------------------*/
 446 static u8 hpc_writecmdtoindex (u8 cmd, u8 index)
 447 {
 448         u8 rc;
 449
 450         switch (cmd) {
 451         case HPC_CTLR_ENABLEIRQ:        // 0x00.N.15
 452         case HPC_CTLR_CLEARIRQ: // 0x06.N.15
 453         case HPC_CTLR_RESET:    // 0x07.N.15
 454         case HPC_CTLR_IRQSTEER: // 0x08.N.15
 455         case HPC_CTLR_DISABLEIRQ:       // 0x01.N.15
 456         case HPC_ALLSLOT_ON:    // 0x11.N.15
 457         case HPC_ALLSLOT_OFF:   // 0x12.N.15
 458                 rc = 0x0F;
 459                 break;
 460
 461         case HPC_SLOT_OFF:      // 0x02.Y.0-14
 462         case HPC_SLOT_ON:       // 0x03.Y.0-14
 463         case HPC_SLOT_ATTNOFF:  // 0x04.N.0-14
 464         case HPC_SLOT_ATTNON:   // 0x05.N.0-14
 465         case HPC_SLOT_BLINKLED: // 0x13.N.0-14
 466                 rc = index;
 467                 break;
 468
 469         case HPC_BUS_33CONVMODE:
 470         case HPC_BUS_66CONVMODE:
 471         case HPC_BUS_66PCIXMODE:
 472         case HPC_BUS_100PCIXMODE:
 473         case HPC_BUS_133PCIXMODE:
 474                 rc = index + WPG_1ST_BUS_INDEX - 1;
 475                 break;
 476
 477         default:
 478                 err ("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
 479                 rc = HPC_ERROR;
 480         }
 481
 482         return rc;
 483 }
 484
 485 /*----------------------------------------------------------------------
 486 * Name:    hpc_readcmdtoindex()
 487 *
 488 * Action:  convert a read command to proper index within a controller
 489 *
 490 * Return   index, HPC_ERROR
 491 *---------------------------------------------------------------------*/
 492 static u8 hpc_readcmdtoindex (u8 cmd, u8 index)
 493 {
 494         u8 rc;
 495
 496         switch (cmd) {
 497         case READ_CTLRSTATUS:
 498                 rc = 0x0F;
 499                 break;
 500         case READ_SLOTSTATUS:
 501         case READ_ALLSTAT:
 502                 rc = index;
 503                 break;
 504         case READ_EXTSLOTSTATUS:
 505                 rc = index + WPG_1ST_EXTSLOT_INDEX;
 506                 break;
 507         case READ_BUSSTATUS:
 508                 rc = index + WPG_1ST_BUS_INDEX - 1;
 509                 break;
 510         case READ_SLOTLATCHLOWREG:
 511                 rc = 0x28;
 512                 break;
 513         case READ_REVLEVEL:
 514                 rc = 0x25;
 515                 break;
 516         case READ_HPCOPTIONS:
 517                 rc = 0x27;
 518                 break;
 519         default:
 520                 rc = HPC_ERROR;
 521         }
 522         return rc;
 523 }
 524
 525 /*----------------------------------------------------------------------
 526 * Name:    HPCreadslot()
 527 *
 528 * Action:  issue a READ command to HPC
 529 *
 530 * Input:   pslot   - cannot be NULL for READ_ALLSTAT
 531 *          pstatus - can be NULL for READ_ALLSTAT
 532 *
 533 * Return   0 or error codes
 534 *---------------------------------------------------------------------*/
 535 int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
 536 {
 537         void __iomem *wpg_bbar = NULL;
 538         struct controller *ctlr_ptr;
 539         struct list_head *pslotlist;
 540         u8 index, status;
 541         int rc = 0;
 542         int busindex;
 543
 544         debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __func__, pslot, cmd, pstatus);
 545
 546         if ((pslot == NULL)
 547             || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
 548                 rc = -EINVAL;
 549                 err ("%s - Error invalid pointer, rc[%d]\n", __func__, rc);
 550                 return rc;
 551         }
 552
 553         if (cmd == READ_BUSSTATUS) {
 554                 busindex = ibmphp_get_bus_index (pslot->bus);
 555                 if (busindex < 0) {
 556                         rc = -EINVAL;
 557                         err ("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
 558                         return rc;
 559                 } else
 560                         index = (u8) busindex;
 561         } else
 562                 index = pslot->ctlr_index;
 563
 564         index = hpc_readcmdtoindex (cmd, index);
 565
 566         if (index == HPC_ERROR) {
 567                 rc = -EINVAL;
 568                 err ("%s - Exit Error:invalid index, rc[%d]\n", __func__, rc);
 569                 return rc;
 570         }
 571
 572         ctlr_ptr = pslot->ctrl;
 573
 574         get_hpc_access ();
 575
 576         //--------------------------------------------------------------------
 577         // map physical address to logical address
 578         //--------------------------------------------------------------------
 579         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 580                 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
 581
 582         //--------------------------------------------------------------------
 583         // check controller status before reading
 584         //--------------------------------------------------------------------
 585         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
 586         if (!rc) {
 587                 switch (cmd) {
 588                 case READ_ALLSTAT:
 589                         // update the slot structure
 590                         pslot->ctrl->status = status;
 591                         pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
 592                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
 593                                                        &status);
 594                         if (!rc)
 595                                 pslot->ext_status = ctrl_read (ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
 596
 597                         break;
 598
 599                 case READ_SLOTSTATUS:
 600                         // DO NOT update the slot structure
 601                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 602                         break;
 603
 604                 case READ_EXTSLOTSTATUS:
 605                         // DO NOT update the slot structure
 606                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 607                         break;
 608
 609                 case READ_CTLRSTATUS:
 610                         // DO NOT update the slot structure
 611                         *pstatus = status;
 612                         break;
 613
 614                 case READ_BUSSTATUS:
 615                         pslot->busstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 616                         break;
 617                 case READ_REVLEVEL:
 618                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 619                         break;
 620                 case READ_HPCOPTIONS:
 621                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 622                         break;
 623                 case READ_SLOTLATCHLOWREG:
 624                         // DO NOT update the slot structure
 625                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 626                         break;
 627
 628                         // Not used
 629                 case READ_ALLSLOT:
 630                         list_for_each (pslotlist, &ibmphp_slot_head) {
 631                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 632                                 index = pslot->ctlr_index;
 633                                 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr,
 634                                                                 wpg_bbar, &status);
 635                                 if (!rc) {
 636                                         pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
 637                                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT,
 638                                                                         ctlr_ptr, wpg_bbar, &status);
 639                                         if (!rc)
 640                                                 pslot->ext_status =
 641                                                     ctrl_read (ctlr_ptr, wpg_bbar,
 642                                                                 index + WPG_1ST_EXTSLOT_INDEX);
 643                                 } else {
 644                                         err ("%s - Error ctrl_read failed\n", __func__);
 645                                         rc = -EINVAL;
 646                                         break;
 647                                 }
 648                         }
 649                         break;
 650                 default:
 651                         rc = -EINVAL;
 652                         break;
 653                 }
 654         }
 655         //--------------------------------------------------------------------
 656         // cleanup
 657         //--------------------------------------------------------------------
 658
 659         // remove physical to logical address mapping
 660         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 661                 iounmap (wpg_bbar);
 662
 663         free_hpc_access ();
 664
 665         debug_polling ("%s - Exit rc[%d]\n", __func__, rc);
 666         return rc;
 667 }
 668
 669 /*----------------------------------------------------------------------
 670 * Name:    ibmphp_hpc_writeslot()
 671 *
 672 * Action: issue a WRITE command to HPC
 673 *---------------------------------------------------------------------*/
 674 int ibmphp_hpc_writeslot (struct slot * pslot, u8 cmd)
 675 {
 676         void __iomem *wpg_bbar = NULL;
 677         struct controller *ctlr_ptr;
 678         u8 index, status;
 679         int busindex;
 680         u8 done;
 681         int rc = 0;
 682         int timeout;
 683
 684         debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __func__, pslot, cmd);
 685         if (pslot == NULL) {
 686                 rc = -EINVAL;
 687                 err ("%s - Error Exit rc[%d]\n", __func__, rc);
 688                 return rc;
 689         }
 690
 691         if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
 692                 (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
 693                 (cmd == HPC_BUS_133PCIXMODE)) {
 694                 busindex = ibmphp_get_bus_index (pslot->bus);
 695                 if (busindex < 0) {
 696                         rc = -EINVAL;
 697                         err ("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
 698                         return rc;
 699                 } else
 700                         index = (u8) busindex;
 701         } else
 702                 index = pslot->ctlr_index;
 703
 704         index = hpc_writecmdtoindex (cmd, index);
 705
 706         if (index == HPC_ERROR) {
 707                 rc = -EINVAL;
 708                 err ("%s - Error Exit rc[%d]\n", __func__, rc);
 709                 return rc;
 710         }
 711
 712         ctlr_ptr = pslot->ctrl;
 713
 714         get_hpc_access ();
 715
 716         //--------------------------------------------------------------------
 717         // map physical address to logical address
 718         //--------------------------------------------------------------------
 719         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
 720                 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
 721
 722                 debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __func__,
 723                 ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
 724                 ctlr_ptr->u.wpeg_ctlr.i2c_addr);
 725         }
 726         //--------------------------------------------------------------------
 727         // check controller status before writing
 728         //--------------------------------------------------------------------
 729         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
 730         if (!rc) {
 731
 732                 ctrl_write (ctlr_ptr, wpg_bbar, index, cmd);
 733
 734                 //--------------------------------------------------------------------
 735                 // check controller is still not working on the command
 736                 //--------------------------------------------------------------------
 737                 timeout = CMD_COMPLETE_TOUT_SEC;
 738                 done = 0;
 739                 while (!done) {
 740                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
 741                                                         &status);
 742                         if (!rc) {
 743                                 if (NEEDTOCHECK_CMDSTATUS (cmd)) {
 744                                         if (CTLR_FINISHED (status) == HPC_CTLR_FINISHED_YES)
 745                                                 done = 1;
 746                                 } else
 747                                         done = 1;
 748                         }
 749                         if (!done) {
 750                                 msleep(1000);
 751                                 if (timeout < 1) {
 752                                         done = 1;
 753                                         err ("%s - Error command complete timeout\n", __func__);
 754                                         rc = -EFAULT;
 755                                 } else
 756                                         timeout--;
 757                         }
 758                 }
 759                 ctlr_ptr->status = status;
 760         }
 761         // cleanup
 762
 763         // remove physical to logical address mapping
 764         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 765                 iounmap (wpg_bbar);
 766         free_hpc_access ();
 767
 768         debug_polling ("%s - Exit rc[%d]\n", __func__, rc);
 769         return rc;
 770 }
 771
 772 /*----------------------------------------------------------------------
 773 * Name:    get_hpc_access()
 774 *
 775 * Action: make sure only one process can access HPC at one time
 776 *---------------------------------------------------------------------*/
 777 static void get_hpc_access (void)
 778 {
 779         mutex_lock(&sem_hpcaccess);
 780 }
 781
 782 /*----------------------------------------------------------------------
 783 * Name:    free_hpc_access()
 784 *---------------------------------------------------------------------*/
 785 void free_hpc_access (void)
 786 {
 787         mutex_unlock(&sem_hpcaccess);
 788 }
 789
 790 /*----------------------------------------------------------------------
 791 * Name:    ibmphp_lock_operations()
 792 *
 793 * Action: make sure only one process can change the data structure
 794 *---------------------------------------------------------------------*/
 795 void ibmphp_lock_operations (void)
 796 {
 797         down (&semOperations);
 798         to_debug = 1;
 799 }
 800
 801 /*----------------------------------------------------------------------
 802 * Name:    ibmphp_unlock_operations()
 803 *---------------------------------------------------------------------*/
 804 void ibmphp_unlock_operations (void)
 805 {
 806         debug ("%s - Entry\n", __func__);
 807         up (&semOperations);
 808         to_debug = 0;
 809         debug ("%s - Exit\n", __func__);
 810 }
 811
 812 /*----------------------------------------------------------------------
 813 * Name:    poll_hpc()
 814 *---------------------------------------------------------------------*/
 815 #define POLL_LATCH_REGISTER     0
 816 #define POLL_SLOTS              1
 817 #define POLL_SLEEP              2
 818 static int poll_hpc(void *data)
 819 {
 820         struct slot myslot;
 821         struct slot *pslot = NULL;
 822         struct list_head *pslotlist;
 823         int rc;
 824         int poll_state = POLL_LATCH_REGISTER;
 825         u8 oldlatchlow = 0x00;
 826         u8 curlatchlow = 0x00;
 827         int poll_count = 0;
 828         u8 ctrl_count = 0x00;
 829
 830         debug ("%s - Entry\n", __func__);
 831
 832         while (!kthread_should_stop()) {
 833                 /* try to get the lock to do some kind of hardware access */
 834                 down (&semOperations);
 835
 836                 switch (poll_state) {
 837                 case POLL_LATCH_REGISTER:
 838                         oldlatchlow = curlatchlow;
 839                         ctrl_count = 0x00;
 840                         list_for_each (pslotlist, &ibmphp_slot_head) {
 841                                 if (ctrl_count >= ibmphp_get_total_controllers())
 842                                         break;
 843                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 844                                 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
 845                                         ctrl_count++;
 846                                         if (READ_SLOT_LATCH (pslot->ctrl)) {
 847                                                 rc = ibmphp_hpc_readslot (pslot,
 848                                                                           READ_SLOTLATCHLOWREG,
 849                                                                           &curlatchlow);
 850                                                 if (oldlatchlow != curlatchlow)
 851                                                         process_changeinlatch (oldlatchlow,
 852                                                                                curlatchlow,
 853                                                                                pslot->ctrl);
 854                                         }
 855                                 }
 856                         }
 857                         ++poll_count;
 858                         poll_state = POLL_SLEEP;
 859                         break;
 860                 case POLL_SLOTS:
 861                         list_for_each (pslotlist, &ibmphp_slot_head) {
 862                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 863                                 // make a copy of the old status
 864                                 memcpy ((void *) &myslot, (void *) pslot,
 865                                         sizeof (struct slot));
 866                                 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
 867                                 if ((myslot.status != pslot->status)
 868                                     || (myslot.ext_status != pslot->ext_status))
 869                                         process_changeinstatus (pslot, &myslot);
 870                         }
 871                         ctrl_count = 0x00;
 872                         list_for_each (pslotlist, &ibmphp_slot_head) {
 873                                 if (ctrl_count >= ibmphp_get_total_controllers())
 874                                         break;
 875                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 876                                 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
 877                                         ctrl_count++;
 878                                         if (READ_SLOT_LATCH (pslot->ctrl))
 879                                                 rc = ibmphp_hpc_readslot (pslot,
 880                                                                           READ_SLOTLATCHLOWREG,
 881                                                                           &curlatchlow);
 882                                 }
 883                         }
 884                         ++poll_count;
 885                         poll_state = POLL_SLEEP;
 886                         break;
 887                 case POLL_SLEEP:
 888                         /* don't sleep with a lock on the hardware */
 889                         up (&semOperations);
 890                         msleep(POLL_INTERVAL_SEC * 1000);
 891
 892                         if (kthread_should_stop())
 893                                 break;
 894
 895                         down (&semOperations);
 896
 897                         if (poll_count >= POLL_LATCH_CNT) {
 898                                 poll_count = 0;
 899                                 poll_state = POLL_SLOTS;
 900                         } else
 901                                 poll_state = POLL_LATCH_REGISTER;
 902                         break;
 903                 }
 904                 /* give up the hardware semaphore */
 905                 up (&semOperations);
 906                 /* sleep for a short time just for good measure */
 907                 msleep(100);
 908         }
 909         up (&sem_exit);
 910         debug ("%s - Exit\n", __func__);
 911         return 0;
 912 }
 913
 914
 915 /*----------------------------------------------------------------------
 916 * Name:    process_changeinstatus
 917 *
 918 * Action:  compare old and new slot status, process the change in status
 919 *
 920 * Input:   pointer to slot struct, old slot struct
 921 *
 922 * Return   0 or error codes
 923 * Value:
 924 *
 925 * Side
 926 * Effects: None.
 927 *
 928 * Notes:
 929 *---------------------------------------------------------------------*/
 930 static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 931 {
 932         u8 status;
 933         int rc = 0;
 934         u8 disable = 0;
 935         u8 update = 0;
 936
 937         debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
 938
 939         // bit 0 - HPC_SLOT_POWER
 940         if ((pslot->status & 0x01) != (poldslot->status & 0x01))
 941                 update = 1;
 942
 943         // bit 1 - HPC_SLOT_CONNECT
 944         // ignore
 945
 946         // bit 2 - HPC_SLOT_ATTN
 947         if ((pslot->status & 0x04) != (poldslot->status & 0x04))
 948                 update = 1;
 949
 950         // bit 3 - HPC_SLOT_PRSNT2
 951         // bit 4 - HPC_SLOT_PRSNT1
 952         if (((pslot->status & 0x08) != (poldslot->status & 0x08))
 953                 || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
 954                 update = 1;
 955
 956         // bit 5 - HPC_SLOT_PWRGD
 957         if ((pslot->status & 0x20) != (poldslot->status & 0x20))
 958                 // OFF -> ON: ignore, ON -> OFF: disable slot
 959                 if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
 960                         disable = 1;
 961
 962         // bit 6 - HPC_SLOT_BUS_SPEED
 963         // ignore
 964
 965         // bit 7 - HPC_SLOT_LATCH
 966         if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
 967                 update = 1;
 968                 // OPEN -> CLOSE
 969                 if (pslot->status & 0x80) {
 970                         if (SLOT_PWRGD (pslot->status)) {
 971                                 // power goes on and off after closing latch
 972                                 // check again to make sure power is still ON
 973                                 msleep(1000);
 974                                 rc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &status);
 975                                 if (SLOT_PWRGD (status))
 976                                         update = 1;
 977                                 else    // overwrite power in pslot to OFF
 978                                         pslot->status &= ~HPC_SLOT_POWER;
 979                         }
 980                 }
 981                 // CLOSE -> OPEN
 982                 else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
 983                         && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
 984                         disable = 1;
 985                 }
 986                 // else - ignore
 987         }
 988         // bit 4 - HPC_SLOT_BLINK_ATTN
 989         if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
 990                 update = 1;
 991
 992         if (disable) {
 993                 debug ("process_changeinstatus - disable slot\n");
 994                 pslot->flag = 0;
 995                 rc = ibmphp_do_disable_slot (pslot);
 996         }
 997
 998         if (update || disable) {
 999                 ibmphp_update_slot_info (pslot);
1000         }
1001
1002         debug ("%s - Exit rc[%d] disable[%x] update[%x]\n", __func__, rc, disable, update);
1003
1004         return rc;
1005 }
1006
1007 /*----------------------------------------------------------------------
1008 * Name:    process_changeinlatch
1009 *
1010 * Action:  compare old and new latch reg status, process the change
1011 *
1012 * Input:   old and current latch register status
1013 *
1014 * Return   0 or error codes
1015 * Value:
1016 *---------------------------------------------------------------------*/
1017 static int process_changeinlatch (u8 old, u8 new, struct controller *ctrl)
1018 {
1019         struct slot myslot, *pslot;
1020         u8 i;
1021         u8 mask;
1022         int rc = 0;
1023
1024         debug ("%s - Entry old[%x], new[%x]\n", __func__, old, new);
1025         // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
1026
1027         for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
1028                 mask = 0x01 << i;
1029                 if ((mask & old) != (mask & new)) {
1030                         pslot = ibmphp_get_slot_from_physical_num (i);
1031                         if (pslot) {
1032                                 memcpy ((void *) &myslot, (void *) pslot, sizeof (struct slot));
1033                                 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
1034                                 debug ("%s - call process_changeinstatus for slot[%d]\n", __func__, i);
1035                                 process_changeinstatus (pslot, &myslot);
1036                         } else {
1037                                 rc = -EINVAL;
1038                                 err ("%s - Error bad pointer for slot[%d]\n", __func__, i);
1039                         }
1040                 }
1041         }
1042         debug ("%s - Exit rc[%d]\n", __func__, rc);
1043         return rc;
1044 }
1045
1046 /*----------------------------------------------------------------------
1047 * Name:    ibmphp_hpc_start_poll_thread
1048 *
1049 * Action:  start polling thread
1050 *---------------------------------------------------------------------*/
1051 int __init ibmphp_hpc_start_poll_thread (void)
1052 {
1053         debug ("%s - Entry\n", __func__);
1054
1055         ibmphp_poll_thread = kthread_run(poll_hpc, NULL, "hpc_poll");
1056         if (IS_ERR(ibmphp_poll_thread)) {
1057                 err ("%s - Error, thread not started\n", __func__);
1058                 return PTR_ERR(ibmphp_poll_thread);
1059         }
1060         return 0;
1061 }
1062
1063 /*----------------------------------------------------------------------
1064 * Name:    ibmphp_hpc_stop_poll_thread
1065 *
1066 * Action:  stop polling thread and cleanup
1067 *---------------------------------------------------------------------*/
1068 void __exit ibmphp_hpc_stop_poll_thread (void)
1069 {
1070         debug ("%s - Entry\n", __func__);
1071
1072         kthread_stop(ibmphp_poll_thread);
1073         debug ("before locking operations \n");
1074         ibmphp_lock_operations ();
1075         debug ("after locking operations \n");
1076
1077         // wait for poll thread to exit
1078         debug ("before sem_exit down \n");
1079         down (&sem_exit);
1080         debug ("after sem_exit down \n");
1081
1082         // cleanup
1083         debug ("before free_hpc_access \n");
1084         free_hpc_access ();
1085         debug ("after free_hpc_access \n");
1086         ibmphp_unlock_operations ();
1087         debug ("after unlock operations \n");
1088         up (&sem_exit);
1089         debug ("after sem exit up\n");
1090
1091         debug ("%s - Exit\n", __func__);
1092 }
1093
1094 /*----------------------------------------------------------------------
1095 * Name:    hpc_wait_ctlr_notworking
1096 *
1097 * Action:  wait until the controller is in a not working state
1098 *
1099 * Return   0, HPC_ERROR
1100 * Value:
1101 *---------------------------------------------------------------------*/
1102 static int hpc_wait_ctlr_notworking (int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
1103                                     u8 * pstatus)
1104 {
1105         int rc = 0;
1106         u8 done = 0;
1107
1108         debug_polling ("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
1109
1110         while (!done) {
1111                 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
1112                 if (*pstatus == HPC_ERROR) {
1113                         rc = HPC_ERROR;
1114                         done = 1;
1115                 }
1116                 if (CTLR_WORKING (*pstatus) == HPC_CTLR_WORKING_NO)
1117                         done = 1;
1118                 if (!done) {
1119                         msleep(1000);
1120                         if (timeout < 1) {
1121                                 done = 1;
1122                                 err ("HPCreadslot - Error ctlr timeout\n");
1123                                 rc = HPC_ERROR;
1124                         } else
1125                                 timeout--;
1126                 }
1127         }
1128         debug_polling ("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
1129         return rc;
1130 }