Merge branch 'linus' into irq/genirq
[linux-2.6] / arch / arm / mach-lh7a40x / clcd.c
1 /*
2  *  arch/arm/mach-lh7a40x/clcd.c
3  *
4  *  Copyright (C) 2004 Marc Singer
5  *
6  *  This program is free software; you can redistribute it and/or
7  *  modify it under the terms of the GNU General Public License
8  *  version 2 as published by the Free Software Foundation.
9  *
10  */
11
12 #include <linux/init.h>
13 #include <linux/device.h>
14 #include <linux/dma-mapping.h>
15 #include <linux/sysdev.h>
16 #include <linux/interrupt.h>
17
18 //#include <linux/module.h>
19 //#include <linux/time.h>
20
21 //#include <asm/mach/time.h>
22 #include <asm/irq.h>
23 #include <asm/mach/irq.h>
24
25 #include <asm/system.h>
26 #include <mach/hardware.h>
27 #include <linux/amba/bus.h>
28 #include <linux/amba/clcd.h>
29
30 #define HRTFTC_HRSETUP          __REG(HRTFTC_PHYS + 0x00)
31 #define HRTFTC_HRCON            __REG(HRTFTC_PHYS + 0x04)
32 #define HRTFTC_HRTIMING1        __REG(HRTFTC_PHYS + 0x08)
33 #define HRTFTC_HRTIMING2        __REG(HRTFTC_PHYS + 0x0c)
34
35 #define ALI_SETUP               __REG(ALI_PHYS + 0x00)
36 #define ALI_CONTROL             __REG(ALI_PHYS + 0x04)
37 #define ALI_TIMING1             __REG(ALI_PHYS + 0x08)
38 #define ALI_TIMING2             __REG(ALI_PHYS + 0x0c)
39
40 #include "lcd-panel.h"
41
42 static void lh7a40x_clcd_disable (struct clcd_fb *fb)
43 {
44 #if defined (CONFIG_MACH_LPD7A400)
45         CPLD_CONTROL &= ~(1<<1);        /* Disable LCD Vee */
46 #endif
47
48 #if defined (CONFIG_MACH_LPD7A404)
49         GPIO_PCD  &= ~(1<<3);           /* Disable LCD Vee */
50 #endif
51
52 #if defined (CONFIG_ARCH_LH7A400)
53         HRTFTC_HRSETUP &= ~(1<<13);     /* Disable HRTFT controller */
54 #endif
55
56 #if defined (CONFIG_ARCH_LH7A404)
57         ALI_SETUP &= ~(1<<13);          /* Disable ALI */
58 #endif
59 }
60
61 static void lh7a40x_clcd_enable (struct clcd_fb *fb)
62 {
63         struct clcd_panel_extra* extra
64                 = (struct clcd_panel_extra*) fb->board_data;
65
66 #if defined (CONFIG_MACH_LPD7A400)
67         CPLD_CONTROL |= (1<<1);         /* Enable LCD Vee */
68 #endif
69
70 #if defined (CONFIG_MACH_LPD7A404)
71         GPIO_PCDD &= ~(1<<3);           /* Enable LCD Vee */
72         GPIO_PCD  |=  (1<<3);
73 #endif
74
75 #if defined (CONFIG_ARCH_LH7A400)
76
77         if (extra) {
78                 HRTFTC_HRSETUP
79                         = (1 << 13)
80                         | ((fb->fb.var.xres - 1) << 4)
81                         | 0xc
82                         | (extra->hrmode ? 1 : 0);
83                 HRTFTC_HRCON
84                         = ((extra->clsen ? 1 : 0) << 1)
85                         | ((extra->spsen ? 1 : 0) << 0);
86                 HRTFTC_HRTIMING1
87                         = (extra->pcdel << 8)
88                         | (extra->revdel << 4)
89                         | (extra->lpdel << 0);
90                 HRTFTC_HRTIMING2
91                         = (extra->spldel << 9)
92                         | (extra->pc2del << 0);
93         }
94         else
95                 HRTFTC_HRSETUP
96                         = (1 << 13)
97                         | 0xc;
98 #endif
99
100 #if defined (CONFIG_ARCH_LH7A404)
101
102         if (extra) {
103                 ALI_SETUP
104                         = (1 << 13)
105                         | ((fb->fb.var.xres - 1) << 4)
106                         | 0xc
107                         | (extra->hrmode ? 1 : 0);
108                 ALI_CONTROL
109                         = ((extra->clsen ? 1 : 0) << 1)
110                         | ((extra->spsen ? 1 : 0) << 0);
111                 ALI_TIMING1
112                         = (extra->pcdel << 8)
113                         | (extra->revdel << 4)
114                         | (extra->lpdel << 0);
115                 ALI_TIMING2
116                         = (extra->spldel << 9)
117                         | (extra->pc2del << 0);
118         }
119         else
120                 ALI_SETUP
121                         = (1 << 13)
122                         | 0xc;
123 #endif
124
125 }
126
127 #define FRAMESIZE(s) (((s) + PAGE_SIZE - 1)&PAGE_MASK)
128
129 static int lh7a40x_clcd_setup (struct clcd_fb *fb)
130 {
131         dma_addr_t dma;
132         u32 len = FRAMESIZE (lcd_panel.mode.xres*lcd_panel.mode.yres
133                              *(lcd_panel.bpp/8));
134
135         fb->panel = &lcd_panel;
136
137                 /* Enforce the sync polarity defaults */
138         if (!(fb->panel->tim2 & TIM2_IHS))
139                 fb->fb.var.sync |= FB_SYNC_HOR_HIGH_ACT;
140         if (!(fb->panel->tim2 & TIM2_IVS))
141                 fb->fb.var.sync |= FB_SYNC_VERT_HIGH_ACT;
142
143 #if defined (HAS_LCD_PANEL_EXTRA)
144         fb->board_data = &lcd_panel_extra;
145 #endif
146
147         fb->fb.screen_base
148                 = dma_alloc_writecombine (&fb->dev->dev, len,
149                                           &dma, GFP_KERNEL);
150         printk ("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p \n",
151                 fb->fb.screen_base, (void*) dma, len,
152                 (void*) io_p2v (CLCDC_PHYS));
153         printk ("CLCD: pixclock %d\n", lcd_panel.mode.pixclock);
154
155         if (!fb->fb.screen_base) {
156                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
157                 return -ENOMEM;
158         }
159
160 #if defined (USE_RGB555)
161         fb->fb.var.green.length = 5; /* Panel uses RGB 5:5:5 */
162 #endif
163
164         fb->fb.fix.smem_start = dma;
165         fb->fb.fix.smem_len = len;
166
167                 /* Drive PE4 high to prevent CPLD crash */
168         GPIO_PEDD |= (1<<4);
169         GPIO_PED  |= (1<<4);
170
171         GPIO_PINMUX |= (1<<1) | (1<<0); /* LCDVD[15:4] */
172
173 //      fb->fb.fbops->fb_check_var (&fb->fb.var, &fb->fb);
174 //      fb->fb.fbops->fb_set_par (&fb->fb);
175
176         return 0;
177 }
178
179 static int lh7a40x_clcd_mmap (struct clcd_fb *fb, struct vm_area_struct *vma)
180 {
181         return dma_mmap_writecombine(&fb->dev->dev, vma,
182                                      fb->fb.screen_base,
183                                      fb->fb.fix.smem_start,
184                                      fb->fb.fix.smem_len);
185 }
186
187 static void lh7a40x_clcd_remove (struct clcd_fb *fb)
188 {
189         dma_free_writecombine (&fb->dev->dev, fb->fb.fix.smem_len,
190                                fb->fb.screen_base, fb->fb.fix.smem_start);
191 }
192
193 static struct clcd_board clcd_platform_data = {
194         .name           = "lh7a40x FB",
195         .check          = clcdfb_check,
196         .decode         = clcdfb_decode,
197         .enable         = lh7a40x_clcd_enable,
198         .setup          = lh7a40x_clcd_setup,
199         .mmap           = lh7a40x_clcd_mmap,
200         .remove         = lh7a40x_clcd_remove,
201         .disable        = lh7a40x_clcd_disable,
202 };
203
204 #define IRQ_CLCDC (IRQ_LCDINTR)
205
206 #define AMBA_DEVICE(name,busid,base,plat,pid)                   \
207 static struct amba_device name##_device = {                     \
208         .dev = {                                                \
209                 .coherent_dma_mask = ~0,                        \
210                 .init_name = busid,                             \
211                 .platform_data = plat,                          \
212                 },                                              \
213         .res = {                                                \
214                 .start  = base##_PHYS,                          \
215                 .end    = (base##_PHYS) + (4*1024) - 1,         \
216                 .flags  = IORESOURCE_MEM,                       \
217                 },                                              \
218         .dma_mask       = ~0,                                   \
219         .irq            = { IRQ_##base, },                      \
220         /* .dma         = base##_DMA,*/                         \
221         .periphid = pid,                                        \
222 }
223
224 AMBA_DEVICE(clcd,  "cldc-lh7a40x",  CLCDC,     &clcd_platform_data, 0x41110);
225
226 static struct amba_device *amba_devs[] __initdata = {
227         &clcd_device,
228 };
229
230 void __init lh7a40x_clcd_init (void)
231 {
232         int i;
233         int result;
234         printk ("CLCD: registering amba devices\n");
235         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
236                 struct amba_device *d = amba_devs[i];
237                 result = amba_device_register(d, &iomem_resource);
238                 printk ("  %d -> %d\n", i ,result);
239         }
240 }