1 #include <linux/kernel.h>
2 #include <linux/errno.h>
3 #include <linux/string.h>
6 #include <linux/slab.h>
7 #include <linux/delay.h>
8 #include <linux/interrupt.h>
9 #include <linux/platform_device.h>
11 #include <asm/setup.h>
12 #include <asm/system.h>
14 #include <asm/amigahw.h>
15 #include <asm/amigaints.h>
16 #include <asm/apollohw.h>
18 #include <linux/module.h>
20 /* apollo video HW definitions */
23 * Control Registers. IOBASE + $x
25 * Note: these are the Memory/IO BASE definitions for a mono card set to the
28 * Control 3A and 3B serve identical functions except that 3A
29 * deals with control 1 and 3b deals with Color LUT reg.
32 #define AP_IOBASE 0x3b0 /* Base address of 1 plane board. */
33 #define AP_STATUS isaIO2mem(AP_IOBASE+0) /* Status register. Read */
34 #define AP_WRITE_ENABLE isaIO2mem(AP_IOBASE+0) /* Write Enable Register Write */
35 #define AP_DEVICE_ID isaIO2mem(AP_IOBASE+1) /* Device ID Register. Read */
36 #define AP_ROP_1 isaIO2mem(AP_IOBASE+2) /* Raster Operation reg. Write Word */
37 #define AP_DIAG_MEM_REQ isaIO2mem(AP_IOBASE+4) /* Diagnostic Memory Request. Write Word */
38 #define AP_CONTROL_0 isaIO2mem(AP_IOBASE+8) /* Control Register 0. Read/Write */
39 #define AP_CONTROL_1 isaIO2mem(AP_IOBASE+0xa) /* Control Register 1. Read/Write */
40 #define AP_CONTROL_3A isaIO2mem(AP_IOBASE+0xe) /* Control Register 3a. Read/Write */
41 #define AP_CONTROL_2 isaIO2mem(AP_IOBASE+0xc) /* Control Register 2. Read/Write */
44 #define FRAME_BUFFER_START 0x0FA0000
45 #define FRAME_BUFFER_LEN 0x40000
48 #define VECTOR_MODE 0x40 /* 010x.xxxx */
49 #define DBLT_MODE 0x80 /* 100x.xxxx */
50 #define NORMAL_MODE 0xE0 /* 111x.xxxx */
51 #define SHIFT_BITS 0x1F /* xxx1.1111 */
52 /* other bits are Shift value */
55 #define AD_BLT 0x80 /* 1xxx.xxxx */
56 #define NORMAL 0x80 /* 1xxx.xxxx */ /* What is happening here ?? */
57 #define INVERSE 0x00 /* 0xxx.xxxx */ /* Clearing this reverses the screen */
58 #define PIX_BLT 0x00 /* 0xxx.xxxx */
60 #define AD_HIBIT 0x40 /* xIxx.xxxx */
62 #define ROP_EN 0x10 /* xxx1.xxxx */
63 #define DST_EQ_SRC 0x00 /* xxx0.xxxx */
64 #define nRESET_SYNC 0x08 /* xxxx.1xxx */
65 #define SYNC_ENAB 0x02 /* xxxx.xx1x */
67 #define BLANK_DISP 0x00 /* xxxx.xxx0 */
68 #define ENAB_DISP 0x01 /* xxxx.xxx1 */
70 #define NORM_CREG1 (nRESET_SYNC | SYNC_ENAB | ENAB_DISP) /* no reset sync */
75 * Following 3 defines are common to 1, 4 and 8 plane.
78 #define S_DATA_1s 0x00 /* 00xx.xxxx */ /* set source to all 1's -- vector drawing */
79 #define S_DATA_PIX 0x40 /* 01xx.xxxx */ /* takes source from ls-bits and replicates over 16 bits */
80 #define S_DATA_PLN 0xC0 /* 11xx.xxxx */ /* normal, each data access =16-bits in
81 one plane of image mem */
84 # define RESET_CREG 0x80 /* 1000.0000 */
86 /* ROP REG - all one nibble */
87 /* ********* NOTE : this is used r0,r1,r2,r3 *********** */
88 #define ROP(r2,r3,r0,r1) ( (U_SHORT)((r0)|((r1)<<4)|((r2)<<8)|((r3)<<12)) )
90 #define SRC_AND_DEST 0x1
91 #define SRC_AND_nDEST 0x2
93 #define nSRC_AND_DEST 0x4
95 #define SRC_XOR_DEST 0x6
96 #define SRC_OR_DEST 0x7
97 #define SRC_NOR_DEST 0x8
98 #define SRC_XNOR_DEST 0x9
100 #define SRC_OR_nDEST 0xB
102 #define nSRC_OR_DEST 0xD
103 #define SRC_NAND_DEST 0xE
106 #define SWAP(A) ((A>>8) | ((A&0xff) <<8))
108 /* frame buffer operations */
110 static int dnfb_blank(int blank, struct fb_info *info);
111 static void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
113 static struct fb_ops dn_fb_ops = {
114 .owner = THIS_MODULE,
115 .fb_blank = dnfb_blank,
116 .fb_fillrect = cfb_fillrect,
117 .fb_copyarea = dnfb_copyarea,
118 .fb_imageblit = cfb_imageblit,
121 struct fb_var_screeninfo dnfb_var __devinitdata = {
124 .xres_virtual = 2048,
125 .yres_virtual = 1024,
129 .vmode = FB_VMODE_NONINTERLACED,
132 static struct fb_fix_screeninfo dnfb_fix __devinitdata = {
134 .smem_start = (FRAME_BUFFER_START + IO_BASE),
135 .smem_len = FRAME_BUFFER_LEN,
136 .type = FB_TYPE_PACKED_PIXELS,
137 .visual = FB_VISUAL_MONO10,
141 static int dnfb_blank(int blank, struct fb_info *info)
144 out_8(AP_CONTROL_3A, 0x0);
146 out_8(AP_CONTROL_3A, 0x1);
151 void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
154 int incr, y_delta, pre_read = 0, x_end, x_word_count;
155 uint start_mask, end_mask, dest;
159 incr = (area->dy <= area->sy) ? 1 : -1;
161 src = (ushort *)(info->screen_base + area->sy * info->fix.line_length +
163 dest = area->dy * (info->fix.line_length >> 1) + (area->dx >> 4);
166 y_delta = (info->fix.line_length * 8) - area->sx - area->width;
167 x_end = area->dx + area->width - 1;
168 x_word_count = (x_end >> 4) - (area->dx >> 4) + 1;
169 start_mask = 0xffff0000 >> (area->dx & 0xf);
170 end_mask = 0x7ffff >> (x_end & 0xf);
172 (((area->dx & 0xf) - (area->sx & 0xf)) % 16) | (0x4 << 5));
173 if ((area->dx & 0xf) < (area->sx & 0xf))
176 y_delta = -((info->fix.line_length * 8) - area->sx - area->width);
177 x_end = area->dx - area->width + 1;
178 x_word_count = (area->dx >> 4) - (x_end >> 4) + 1;
179 start_mask = 0x7ffff >> (area->dx & 0xf);
180 end_mask = 0xffff0000 >> (x_end & 0xf);
182 ((-((area->sx & 0xf) - (area->dx & 0xf))) % 16) |
184 if ((area->dx & 0xf) > (area->sx & 0xf))
188 for (i = 0; i < area->height; i++) {
190 out_8(AP_CONTROL_3A, 0xc | (dest >> 16));
198 out_8(AP_WRITE_ENABLE, start_mask);
202 out_8(AP_WRITE_ENABLE, 0);
204 for (j = 1; j < (x_word_count - 1); j++) {
210 out_8(AP_WRITE_ENABLE, start_mask);
215 out_8(AP_WRITE_ENABLE, start_mask | end_mask);
220 src += (y_delta / 16);
221 dest += (y_delta / 16);
223 out_8(AP_CONTROL_0, NORMAL_MODE);
230 static int __devinit dnfb_probe(struct device *device)
232 struct platform_device *dev = to_platform_device(device);
233 struct fb_info *info;
236 info = framebuffer_alloc(0, &dev->dev);
240 info->fbops = &dn_fb_ops;
241 info->fix = dnfb_fix;
242 info->var = dnfb_var;
243 info->var.red.length = 1;
244 info->var.red.offset = 0;
245 info->var.green = info->var.blue = info->var.red;
246 info->screen_base = (u_char *) info->fix.smem_start;
248 err = fb_alloc_cmap(&info->cmap, 2, 0);
250 framebuffer_release(info);
254 err = register_framebuffer(info);
256 fb_dealloc_cmap(&info->cmap);
257 framebuffer_release(info);
260 dev_set_drvdata(&dev->dev, info);
262 /* now we have registered we can safely setup the hardware */
263 out_8(AP_CONTROL_3A, RESET_CREG);
264 out_be16(AP_WRITE_ENABLE, 0x0);
265 out_8(AP_CONTROL_0, NORMAL_MODE);
266 out_8(AP_CONTROL_1, (AD_BLT | DST_EQ_SRC | NORM_CREG1));
267 out_8(AP_CONTROL_2, S_DATA_PLN);
268 out_be16(AP_ROP_1, SWAP(0x3));
270 printk("apollo frame buffer alive and kicking !\n");
274 static struct device_driver dnfb_driver = {
276 .bus = &platform_bus_type,
280 static struct platform_device dnfb_device = {
284 int __init dnfb_init(void)
288 if (fb_get_options("dnfb", NULL))
291 ret = driver_register(&dnfb_driver);
294 ret = platform_device_register(&dnfb_device);
296 driver_unregister(&dnfb_driver);
301 module_init(dnfb_init);
303 MODULE_LICENSE("GPL");