git.oblomov.eu Git - linux-2.6/blob - drivers/net/enc28j60.c

   1 /*
   2  * Microchip ENC28J60 ethernet driver (MAC + PHY)
   3  *
   4  * Copyright (C) 2007 Eurek srl
   5  * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
   6  * based on enc28j60.c written by David Anders for 2.4 kernel version
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/types.h>
  19 #include <linux/fcntl.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/slab.h>
  22 #include <linux/string.h>
  23 #include <linux/errno.h>
  24 #include <linux/init.h>
  25 #include <linux/netdevice.h>
  26 #include <linux/etherdevice.h>
  27 #include <linux/ethtool.h>
  28 #include <linux/tcp.h>
  29 #include <linux/skbuff.h>
  30 #include <linux/delay.h>
  31 #include <linux/spi/spi.h>
  32
  33 #include "enc28j60_hw.h"
  34
  35 #define DRV_NAME        "enc28j60"
  36 #define DRV_VERSION     "1.01"
  37
  38 #define SPI_OPLEN       1
  39
  40 #define ENC28J60_MSG_DEFAULT    \
  41         (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
  42
  43 /* Buffer size required for the largest SPI transfer (i.e., reading a
  44  * frame). */
  45 #define SPI_TRANSFER_BUF_LEN    (4 + MAX_FRAMELEN)
  46
  47 #define TX_TIMEOUT      (4 * HZ)
  48
  49 /* Max TX retries in case of collision as suggested by errata datasheet */
  50 #define MAX_TX_RETRYCOUNT       16
  51
  52 enum {
  53         RXFILTER_NORMAL,
  54         RXFILTER_MULTI,
  55         RXFILTER_PROMISC
  56 };
  57
  58 /* Driver local data */
  59 struct enc28j60_net {
  60         struct net_device *netdev;
  61         struct spi_device *spi;
  62         struct mutex lock;
  63         struct sk_buff *tx_skb;
  64         struct work_struct tx_work;
  65         struct work_struct irq_work;
  66         struct work_struct setrx_work;
  67         struct work_struct restart_work;
  68         u8 bank;                /* current register bank selected */
  69         u16 next_pk_ptr;        /* next packet pointer within FIFO */
  70         u16 max_pk_counter;     /* statistics: max packet counter */
  71         u16 tx_retry_count;
  72         bool hw_enable;
  73         bool full_duplex;
  74         int rxfilter;
  75         u32 msg_enable;
  76         u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
  77 };
  78
  79 /* use ethtool to change the level for any given device */
  80 static struct {
  81         u32 msg_enable;
  82 } debug = { -1 };
  83
  84 /*
  85  * SPI read buffer
  86  * wait for the SPI transfer and copy received data to destination
  87  */
  88 static int
  89 spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
  90 {
  91         u8 *rx_buf = priv->spi_transfer_buf + 4;
  92         u8 *tx_buf = priv->spi_transfer_buf;
  93         struct spi_transfer t = {
  94                 .tx_buf = tx_buf,
  95                 .rx_buf = rx_buf,
  96                 .len = SPI_OPLEN + len,
  97         };
  98         struct spi_message msg;
  99         int ret;
 100
 101         tx_buf[0] = ENC28J60_READ_BUF_MEM;
 102         tx_buf[1] = tx_buf[2] = tx_buf[3] = 0;  /* don't care */
 103
 104         spi_message_init(&msg);
 105         spi_message_add_tail(&t, &msg);
 106         ret = spi_sync(priv->spi, &msg);
 107         if (ret == 0) {
 108                 memcpy(data, &rx_buf[SPI_OPLEN], len);
 109                 ret = msg.status;
 110         }
 111         if (ret && netif_msg_drv(priv))
 112                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 113                         __func__, ret);
 114
 115         return ret;
 116 }
 117
 118 /*
 119  * SPI write buffer
 120  */
 121 static int spi_write_buf(struct enc28j60_net *priv, int len,
 122                          const u8 *data)
 123 {
 124         int ret;
 125
 126         if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
 127                 ret = -EINVAL;
 128         else {
 129                 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
 130                 memcpy(&priv->spi_transfer_buf[1], data, len);
 131                 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
 132                 if (ret && netif_msg_drv(priv))
 133                         printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 134                                 __func__, ret);
 135         }
 136         return ret;
 137 }
 138
 139 /*
 140  * basic SPI read operation
 141  */
 142 static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
 143                            u8 addr)
 144 {
 145         u8 tx_buf[2];
 146         u8 rx_buf[4];
 147         u8 val = 0;
 148         int ret;
 149         int slen = SPI_OPLEN;
 150
 151         /* do dummy read if needed */
 152         if (addr & SPRD_MASK)
 153                 slen++;
 154
 155         tx_buf[0] = op | (addr & ADDR_MASK);
 156         ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
 157         if (ret)
 158                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 159                         __func__, ret);
 160         else
 161                 val = rx_buf[slen - 1];
 162
 163         return val;
 164 }
 165
 166 /*
 167  * basic SPI write operation
 168  */
 169 static int spi_write_op(struct enc28j60_net *priv, u8 op,
 170                         u8 addr, u8 val)
 171 {
 172         int ret;
 173
 174         priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
 175         priv->spi_transfer_buf[1] = val;
 176         ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
 177         if (ret && netif_msg_drv(priv))
 178                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 179                         __func__, ret);
 180         return ret;
 181 }
 182
 183 static void enc28j60_soft_reset(struct enc28j60_net *priv)
 184 {
 185         if (netif_msg_hw(priv))
 186                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 187
 188         spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
 189         /* Errata workaround #1, CLKRDY check is unreliable,
 190          * delay at least 1 mS instead */
 191         udelay(2000);
 192 }
 193
 194 /*
 195  * select the current register bank if necessary
 196  */
 197 static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
 198 {
 199         if ((addr & BANK_MASK) != priv->bank) {
 200                 u8 b = (addr & BANK_MASK) >> 5;
 201
 202                 if (b != (ECON1_BSEL1 | ECON1_BSEL0))
 203                         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
 204                                      ECON1_BSEL1 | ECON1_BSEL0);
 205                 if (b != 0)
 206                         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1, b);
 207                 priv->bank = (addr & BANK_MASK);
 208         }
 209 }
 210
 211 /*
 212  * Register access routines through the SPI bus.
 213  * Every register access comes in two flavours:
 214  * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
 215  *   atomically more than one register
 216  * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
 217  *
 218  * Some registers can be accessed through the bit field clear and
 219  * bit field set to avoid a read modify write cycle.
 220  */
 221
 222 /*
 223  * Register bit field Set
 224  */
 225 static void nolock_reg_bfset(struct enc28j60_net *priv,
 226                                       u8 addr, u8 mask)
 227 {
 228         enc28j60_set_bank(priv, addr);
 229         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
 230 }
 231
 232 static void locked_reg_bfset(struct enc28j60_net *priv,
 233                                       u8 addr, u8 mask)
 234 {
 235         mutex_lock(&priv->lock);
 236         nolock_reg_bfset(priv, addr, mask);
 237         mutex_unlock(&priv->lock);
 238 }
 239
 240 /*
 241  * Register bit field Clear
 242  */
 243 static void nolock_reg_bfclr(struct enc28j60_net *priv,
 244                                       u8 addr, u8 mask)
 245 {
 246         enc28j60_set_bank(priv, addr);
 247         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
 248 }
 249
 250 static void locked_reg_bfclr(struct enc28j60_net *priv,
 251                                       u8 addr, u8 mask)
 252 {
 253         mutex_lock(&priv->lock);
 254         nolock_reg_bfclr(priv, addr, mask);
 255         mutex_unlock(&priv->lock);
 256 }
 257
 258 /*
 259  * Register byte read
 260  */
 261 static int nolock_regb_read(struct enc28j60_net *priv,
 262                                      u8 address)
 263 {
 264         enc28j60_set_bank(priv, address);
 265         return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
 266 }
 267
 268 static int locked_regb_read(struct enc28j60_net *priv,
 269                                      u8 address)
 270 {
 271         int ret;
 272
 273         mutex_lock(&priv->lock);
 274         ret = nolock_regb_read(priv, address);
 275         mutex_unlock(&priv->lock);
 276
 277         return ret;
 278 }
 279
 280 /*
 281  * Register word read
 282  */
 283 static int nolock_regw_read(struct enc28j60_net *priv,
 284                                      u8 address)
 285 {
 286         int rl, rh;
 287
 288         enc28j60_set_bank(priv, address);
 289         rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
 290         rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
 291
 292         return (rh << 8) | rl;
 293 }
 294
 295 static int locked_regw_read(struct enc28j60_net *priv,
 296                                      u8 address)
 297 {
 298         int ret;
 299
 300         mutex_lock(&priv->lock);
 301         ret = nolock_regw_read(priv, address);
 302         mutex_unlock(&priv->lock);
 303
 304         return ret;
 305 }
 306
 307 /*
 308  * Register byte write
 309  */
 310 static void nolock_regb_write(struct enc28j60_net *priv,
 311                                        u8 address, u8 data)
 312 {
 313         enc28j60_set_bank(priv, address);
 314         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
 315 }
 316
 317 static void locked_regb_write(struct enc28j60_net *priv,
 318                                        u8 address, u8 data)
 319 {
 320         mutex_lock(&priv->lock);
 321         nolock_regb_write(priv, address, data);
 322         mutex_unlock(&priv->lock);
 323 }
 324
 325 /*
 326  * Register word write
 327  */
 328 static void nolock_regw_write(struct enc28j60_net *priv,
 329                                        u8 address, u16 data)
 330 {
 331         enc28j60_set_bank(priv, address);
 332         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
 333         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
 334                      (u8) (data >> 8));
 335 }
 336
 337 static void locked_regw_write(struct enc28j60_net *priv,
 338                                        u8 address, u16 data)
 339 {
 340         mutex_lock(&priv->lock);
 341         nolock_regw_write(priv, address, data);
 342         mutex_unlock(&priv->lock);
 343 }
 344
 345 /*
 346  * Buffer memory read
 347  * Select the starting address and execute a SPI buffer read
 348  */
 349 static void enc28j60_mem_read(struct enc28j60_net *priv,
 350                                      u16 addr, int len, u8 *data)
 351 {
 352         mutex_lock(&priv->lock);
 353         nolock_regw_write(priv, ERDPTL, addr);
 354 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 355         if (netif_msg_drv(priv)) {
 356                 u16 reg;
 357                 reg = nolock_regw_read(priv, ERDPTL);
 358                 if (reg != addr)
 359                         printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
 360                                 "(0x%04x - 0x%04x)\n", __func__, reg, addr);
 361         }
 362 #endif
 363         spi_read_buf(priv, len, data);
 364         mutex_unlock(&priv->lock);
 365 }
 366
 367 /*
 368  * Write packet to enc28j60 TX buffer memory
 369  */
 370 static void
 371 enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
 372 {
 373         mutex_lock(&priv->lock);
 374         /* Set the write pointer to start of transmit buffer area */
 375         nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
 376 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 377         if (netif_msg_drv(priv)) {
 378                 u16 reg;
 379                 reg = nolock_regw_read(priv, EWRPTL);
 380                 if (reg != TXSTART_INIT)
 381                         printk(KERN_DEBUG DRV_NAME
 382                                 ": %s() ERWPT:0x%04x != 0x%04x\n",
 383                                 __func__, reg, TXSTART_INIT);
 384         }
 385 #endif
 386         /* Set the TXND pointer to correspond to the packet size given */
 387         nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
 388         /* write per-packet control byte */
 389         spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
 390         if (netif_msg_hw(priv))
 391                 printk(KERN_DEBUG DRV_NAME
 392                         ": %s() after control byte ERWPT:0x%04x\n",
 393                         __func__, nolock_regw_read(priv, EWRPTL));
 394         /* copy the packet into the transmit buffer */
 395         spi_write_buf(priv, len, data);
 396         if (netif_msg_hw(priv))
 397                 printk(KERN_DEBUG DRV_NAME
 398                          ": %s() after write packet ERWPT:0x%04x, len=%d\n",
 399                          __func__, nolock_regw_read(priv, EWRPTL), len);
 400         mutex_unlock(&priv->lock);
 401 }
 402
 403 static unsigned long msec20_to_jiffies;
 404
 405 static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
 406 {
 407         unsigned long timeout = jiffies + msec20_to_jiffies;
 408
 409         /* 20 msec timeout read */
 410         while ((nolock_regb_read(priv, reg) & mask) != val) {
 411                 if (time_after(jiffies, timeout)) {
 412                         if (netif_msg_drv(priv))
 413                                 dev_dbg(&priv->spi->dev,
 414                                         "reg %02x ready timeout!\n", reg);
 415                         return -ETIMEDOUT;
 416                 }
 417                 cpu_relax();
 418         }
 419         return 0;
 420 }
 421
 422 /*
 423  * Wait until the PHY operation is complete.
 424  */
 425 static int wait_phy_ready(struct enc28j60_net *priv)
 426 {
 427         return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
 428 }
 429
 430 /*
 431  * PHY register read
 432  * PHY registers are not accessed directly, but through the MII
 433  */
 434 static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
 435 {
 436         u16 ret;
 437
 438         mutex_lock(&priv->lock);
 439         /* set the PHY register address */
 440         nolock_regb_write(priv, MIREGADR, address);
 441         /* start the register read operation */
 442         nolock_regb_write(priv, MICMD, MICMD_MIIRD);
 443         /* wait until the PHY read completes */
 444         wait_phy_ready(priv);
 445         /* quit reading */
 446         nolock_regb_write(priv, MICMD, 0x00);
 447         /* return the data */
 448         ret  = nolock_regw_read(priv, MIRDL);
 449         mutex_unlock(&priv->lock);
 450
 451         return ret;
 452 }
 453
 454 static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
 455 {
 456         int ret;
 457
 458         mutex_lock(&priv->lock);
 459         /* set the PHY register address */
 460         nolock_regb_write(priv, MIREGADR, address);
 461         /* write the PHY data */
 462         nolock_regw_write(priv, MIWRL, data);
 463         /* wait until the PHY write completes and return */
 464         ret = wait_phy_ready(priv);
 465         mutex_unlock(&priv->lock);
 466
 467         return ret;
 468 }
 469
 470 /*
 471  * Program the hardware MAC address from dev->dev_addr.
 472  */
 473 static int enc28j60_set_hw_macaddr(struct net_device *ndev)
 474 {
 475         int ret;
 476         struct enc28j60_net *priv = netdev_priv(ndev);
 477
 478         mutex_lock(&priv->lock);
 479         if (!priv->hw_enable) {
 480                 if (netif_msg_drv(priv))
 481                         printk(KERN_INFO DRV_NAME
 482                                 ": %s: Setting MAC address to %pM\n",
 483                                 ndev->name, ndev->dev_addr);
 484                 /* NOTE: MAC address in ENC28J60 is byte-backward */
 485                 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
 486                 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
 487                 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
 488                 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
 489                 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
 490                 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
 491                 ret = 0;
 492         } else {
 493                 if (netif_msg_drv(priv))
 494                         printk(KERN_DEBUG DRV_NAME
 495                                 ": %s() Hardware must be disabled to set "
 496                                 "Mac address\n", __func__);
 497                 ret = -EBUSY;
 498         }
 499         mutex_unlock(&priv->lock);
 500         return ret;
 501 }
 502
 503 /*
 504  * Store the new hardware address in dev->dev_addr, and update the MAC.
 505  */
 506 static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
 507 {
 508         struct sockaddr *address = addr;
 509
 510         if (netif_running(dev))
 511                 return -EBUSY;
 512         if (!is_valid_ether_addr(address->sa_data))
 513                 return -EADDRNOTAVAIL;
 514
 515         memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
 516         return enc28j60_set_hw_macaddr(dev);
 517 }
 518
 519 /*
 520  * Debug routine to dump useful register contents
 521  */
 522 static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
 523 {
 524         mutex_lock(&priv->lock);
 525         printk(KERN_DEBUG DRV_NAME " %s\n"
 526                 "HwRevID: 0x%02x\n"
 527                 "Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n"
 528                 "       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n"
 529                 "MAC  : MACON1 MACON3 MACON4\n"
 530                 "       0x%02x   0x%02x   0x%02x\n"
 531                 "Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
 532                 "       0x%04x 0x%04x 0x%04x  0x%04x  "
 533                 "0x%02x    0x%02x    0x%04x\n"
 534                 "Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n"
 535                 "       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
 536                 msg, nolock_regb_read(priv, EREVID),
 537                 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
 538                 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
 539                 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
 540                 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
 541                 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
 542                 nolock_regw_read(priv, ERXWRPTL),
 543                 nolock_regw_read(priv, ERXRDPTL),
 544                 nolock_regb_read(priv, ERXFCON),
 545                 nolock_regb_read(priv, EPKTCNT),
 546                 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
 547                 nolock_regw_read(priv, ETXNDL),
 548                 nolock_regb_read(priv, MACLCON1),
 549                 nolock_regb_read(priv, MACLCON2),
 550                 nolock_regb_read(priv, MAPHSUP));
 551         mutex_unlock(&priv->lock);
 552 }
 553
 554 /*
 555  * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
 556  */
 557 static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
 558 {
 559         u16 erxrdpt;
 560
 561         if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
 562                 erxrdpt = end;
 563         else
 564                 erxrdpt = next_packet_ptr - 1;
 565
 566         return erxrdpt;
 567 }
 568
 569 static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 570 {
 571         u16 erxrdpt;
 572
 573         if (start > 0x1FFF || end > 0x1FFF || start > end) {
 574                 if (netif_msg_drv(priv))
 575                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
 576                                 "bad parameters!\n", __func__, start, end);
 577                 return;
 578         }
 579         /* set receive buffer start + end */
 580         priv->next_pk_ptr = start;
 581         nolock_regw_write(priv, ERXSTL, start);
 582         erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
 583         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
 584         nolock_regw_write(priv, ERXNDL, end);
 585 }
 586
 587 static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 588 {
 589         if (start > 0x1FFF || end > 0x1FFF || start > end) {
 590                 if (netif_msg_drv(priv))
 591                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
 592                                 "bad parameters!\n", __func__, start, end);
 593                 return;
 594         }
 595         /* set transmit buffer start + end */
 596         nolock_regw_write(priv, ETXSTL, start);
 597         nolock_regw_write(priv, ETXNDL, end);
 598 }
 599
 600 /*
 601  * Low power mode shrinks power consumption about 100x, so we'd like
 602  * the chip to be in that mode whenever it's inactive.  (However, we
 603  * can't stay in lowpower mode during suspend with WOL active.)
 604  */
 605 static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
 606 {
 607         if (netif_msg_drv(priv))
 608                 dev_dbg(&priv->spi->dev, "%s power...\n",
 609                                 is_low ? "low" : "high");
 610
 611         mutex_lock(&priv->lock);
 612         if (is_low) {
 613                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 614                 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
 615                 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
 616                 /* ECON2_VRPS was set during initialization */
 617                 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
 618         } else {
 619                 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
 620                 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
 621                 /* caller sets ECON1_RXEN */
 622         }
 623         mutex_unlock(&priv->lock);
 624 }
 625
 626 static int enc28j60_hw_init(struct enc28j60_net *priv)
 627 {
 628         u8 reg;
 629
 630         if (netif_msg_drv(priv))
 631                 printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
 632                         priv->full_duplex ? "FullDuplex" : "HalfDuplex");
 633
 634         mutex_lock(&priv->lock);
 635         /* first reset the chip */
 636         enc28j60_soft_reset(priv);
 637         /* Clear ECON1 */
 638         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
 639         priv->bank = 0;
 640         priv->hw_enable = false;
 641         priv->tx_retry_count = 0;
 642         priv->max_pk_counter = 0;
 643         priv->rxfilter = RXFILTER_NORMAL;
 644         /* enable address auto increment and voltage regulator powersave */
 645         nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
 646
 647         nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
 648         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
 649         mutex_unlock(&priv->lock);
 650
 651         /*
 652          * Check the RevID.
 653          * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
 654          * damaged
 655          */
 656         reg = locked_regb_read(priv, EREVID);
 657         if (netif_msg_drv(priv))
 658                 printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
 659         if (reg == 0x00 || reg == 0xff) {
 660                 if (netif_msg_drv(priv))
 661                         printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
 662                                 __func__, reg);
 663                 return 0;
 664         }
 665
 666         /* default filter mode: (unicast OR broadcast) AND crc valid */
 667         locked_regb_write(priv, ERXFCON,
 668                             ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
 669
 670         /* enable MAC receive */
 671         locked_regb_write(priv, MACON1,
 672                             MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
 673         /* enable automatic padding and CRC operations */
 674         if (priv->full_duplex) {
 675                 locked_regb_write(priv, MACON3,
 676                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
 677                                     MACON3_FRMLNEN | MACON3_FULDPX);
 678                 /* set inter-frame gap (non-back-to-back) */
 679                 locked_regb_write(priv, MAIPGL, 0x12);
 680                 /* set inter-frame gap (back-to-back) */
 681                 locked_regb_write(priv, MABBIPG, 0x15);
 682         } else {
 683                 locked_regb_write(priv, MACON3,
 684                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
 685                                     MACON3_FRMLNEN);
 686                 locked_regb_write(priv, MACON4, 1 << 6);        /* DEFER bit */
 687                 /* set inter-frame gap (non-back-to-back) */
 688                 locked_regw_write(priv, MAIPGL, 0x0C12);
 689                 /* set inter-frame gap (back-to-back) */
 690                 locked_regb_write(priv, MABBIPG, 0x12);
 691         }
 692         /*
 693          * MACLCON1 (default)
 694          * MACLCON2 (default)
 695          * Set the maximum packet size which the controller will accept
 696          */
 697         locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
 698
 699         /* Configure LEDs */
 700         if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
 701                 return 0;
 702
 703         if (priv->full_duplex) {
 704                 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
 705                         return 0;
 706                 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
 707                         return 0;
 708         } else {
 709                 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
 710                         return 0;
 711                 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
 712                         return 0;
 713         }
 714         if (netif_msg_hw(priv))
 715                 enc28j60_dump_regs(priv, "Hw initialized.");
 716
 717         return 1;
 718 }
 719
 720 static void enc28j60_hw_enable(struct enc28j60_net *priv)
 721 {
 722         /* enable interrupts */
 723         if (netif_msg_hw(priv))
 724                 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
 725                         __func__);
 726
 727         enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
 728
 729         mutex_lock(&priv->lock);
 730         nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
 731                          EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
 732         nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
 733                           EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
 734
 735         /* enable receive logic */
 736         nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
 737         priv->hw_enable = true;
 738         mutex_unlock(&priv->lock);
 739 }
 740
 741 static void enc28j60_hw_disable(struct enc28j60_net *priv)
 742 {
 743         mutex_lock(&priv->lock);
 744         /* disable interrutps and packet reception */
 745         nolock_regb_write(priv, EIE, 0x00);
 746         nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 747         priv->hw_enable = false;
 748         mutex_unlock(&priv->lock);
 749 }
 750
 751 static int
 752 enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
 753 {
 754         struct enc28j60_net *priv = netdev_priv(ndev);
 755         int ret = 0;
 756
 757         if (!priv->hw_enable) {
 758                 /* link is in low power mode now; duplex setting
 759                  * will take effect on next enc28j60_hw_init().
 760                  */
 761                 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
 762                         priv->full_duplex = (duplex == DUPLEX_FULL);
 763                 else {
 764                         if (netif_msg_link(priv))
 765                                 dev_warn(&ndev->dev,
 766                                         "unsupported link setting\n");
 767                         ret = -EOPNOTSUPP;
 768                 }
 769         } else {
 770                 if (netif_msg_link(priv))
 771                         dev_warn(&ndev->dev, "Warning: hw must be disabled "
 772                                 "to set link mode\n");
 773                 ret = -EBUSY;
 774         }
 775         return ret;
 776 }
 777
 778 /*
 779  * Read the Transmit Status Vector
 780  */
 781 static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
 782 {
 783         int endptr;
 784
 785         endptr = locked_regw_read(priv, ETXNDL);
 786         if (netif_msg_hw(priv))
 787                 printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
 788                          endptr + 1);
 789         enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv);
 790 }
 791
 792 static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
 793                                 u8 tsv[TSV_SIZE])
 794 {
 795         u16 tmp1, tmp2;
 796
 797         printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
 798         tmp1 = tsv[1];
 799         tmp1 <<= 8;
 800         tmp1 |= tsv[0];
 801
 802         tmp2 = tsv[5];
 803         tmp2 <<= 8;
 804         tmp2 |= tsv[4];
 805
 806         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
 807                 " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
 808         printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
 809                 " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
 810                 TSV_GETBIT(tsv, TSV_TXCRCERROR),
 811                 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
 812                 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
 813         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
 814                 "PacketDefer: %d, ExDefer: %d\n",
 815                 TSV_GETBIT(tsv, TSV_TXMULTICAST),
 816                 TSV_GETBIT(tsv, TSV_TXBROADCAST),
 817                 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
 818                 TSV_GETBIT(tsv, TSV_TXEXDEFER));
 819         printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
 820                  "Giant: %d, Underrun: %d\n",
 821                  TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
 822                  TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
 823                  TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
 824         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
 825                  "BackPressApp: %d, VLanTagFrame: %d\n",
 826                  TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
 827                  TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
 828                  TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
 829                  TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
 830 }
 831
 832 /*
 833  * Receive Status vector
 834  */
 835 static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
 836                               u16 pk_ptr, int len, u16 sts)
 837 {
 838         printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
 839                 msg, pk_ptr);
 840         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
 841                  RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
 842         printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
 843                  " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
 844                  RSV_GETBIT(sts, RSV_CRCERROR),
 845                  RSV_GETBIT(sts, RSV_LENCHECKERR),
 846                  RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
 847         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
 848                  "LongDropEvent: %d, CarrierEvent: %d\n",
 849                  RSV_GETBIT(sts, RSV_RXMULTICAST),
 850                  RSV_GETBIT(sts, RSV_RXBROADCAST),
 851                  RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
 852                  RSV_GETBIT(sts, RSV_CARRIEREV));
 853         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
 854                  " UnknownOp: %d, VLanTagFrame: %d\n",
 855                  RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
 856                  RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
 857                  RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
 858                  RSV_GETBIT(sts, RSV_RXTYPEVLAN));
 859 }
 860
 861 static void dump_packet(const char *msg, int len, const char *data)
 862 {
 863         printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
 864         print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
 865                         data, len, true);
 866 }
 867
 868 /*
 869  * Hardware receive function.
 870  * Read the buffer memory, update the FIFO pointer to free the buffer,
 871  * check the status vector and decrement the packet counter.
 872  */
 873 static void enc28j60_hw_rx(struct net_device *ndev)
 874 {
 875         struct enc28j60_net *priv = netdev_priv(ndev);
 876         struct sk_buff *skb = NULL;
 877         u16 erxrdpt, next_packet, rxstat;
 878         u8 rsv[RSV_SIZE];
 879         int len;
 880
 881         if (netif_msg_rx_status(priv))
 882                 printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
 883                         priv->next_pk_ptr);
 884
 885         if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
 886                 if (netif_msg_rx_err(priv))
 887                         dev_err(&ndev->dev,
 888                                 "%s() Invalid packet address!! 0x%04x\n",
 889                                 __func__, priv->next_pk_ptr);
 890                 /* packet address corrupted: reset RX logic */
 891                 mutex_lock(&priv->lock);
 892                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 893                 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
 894                 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
 895                 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
 896                 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
 897                 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
 898                 mutex_unlock(&priv->lock);
 899                 ndev->stats.rx_errors++;
 900                 return;
 901         }
 902         /* Read next packet pointer and rx status vector */
 903         enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
 904
 905         next_packet = rsv[1];
 906         next_packet <<= 8;
 907         next_packet |= rsv[0];
 908
 909         len = rsv[3];
 910         len <<= 8;
 911         len |= rsv[2];
 912
 913         rxstat = rsv[5];
 914         rxstat <<= 8;
 915         rxstat |= rsv[4];
 916
 917         if (netif_msg_rx_status(priv))
 918                 enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
 919
 920         if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
 921                 if (netif_msg_rx_err(priv))
 922                         dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
 923                 ndev->stats.rx_errors++;
 924                 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
 925                         ndev->stats.rx_crc_errors++;
 926                 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
 927                         ndev->stats.rx_frame_errors++;
 928         } else {
 929                 skb = dev_alloc_skb(len + NET_IP_ALIGN);
 930                 if (!skb) {
 931                         if (netif_msg_rx_err(priv))
 932                                 dev_err(&ndev->dev,
 933                                         "out of memory for Rx'd frame\n");
 934                         ndev->stats.rx_dropped++;
 935                 } else {
 936                         skb->dev = ndev;
 937                         skb_reserve(skb, NET_IP_ALIGN);
 938                         /* copy the packet from the receive buffer */
 939                         enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
 940                                         len, skb_put(skb, len));
 941                         if (netif_msg_pktdata(priv))
 942                                 dump_packet(__func__, skb->len, skb->data);
 943                         skb->protocol = eth_type_trans(skb, ndev);
 944                         /* update statistics */
 945                         ndev->stats.rx_packets++;
 946                         ndev->stats.rx_bytes += len;
 947                         netif_rx(skb);
 948                 }
 949         }
 950         /*
 951          * Move the RX read pointer to the start of the next
 952          * received packet.
 953          * This frees the memory we just read out
 954          */
 955         erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
 956         if (netif_msg_hw(priv))
 957                 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
 958                         __func__, erxrdpt);
 959
 960         mutex_lock(&priv->lock);
 961         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
 962 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 963         if (netif_msg_drv(priv)) {
 964                 u16 reg;
 965                 reg = nolock_regw_read(priv, ERXRDPTL);
 966                 if (reg != erxrdpt)
 967                         printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
 968                                 "error (0x%04x - 0x%04x)\n", __func__,
 969                                 reg, erxrdpt);
 970         }
 971 #endif
 972         priv->next_pk_ptr = next_packet;
 973         /* we are done with this packet, decrement the packet counter */
 974         nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
 975         mutex_unlock(&priv->lock);
 976 }
 977
 978 /*
 979  * Calculate free space in RxFIFO
 980  */
 981 static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
 982 {
 983         int epkcnt, erxst, erxnd, erxwr, erxrd;
 984         int free_space;
 985
 986         mutex_lock(&priv->lock);
 987         epkcnt = nolock_regb_read(priv, EPKTCNT);
 988         if (epkcnt >= 255)
 989                 free_space = -1;
 990         else {
 991                 erxst = nolock_regw_read(priv, ERXSTL);
 992                 erxnd = nolock_regw_read(priv, ERXNDL);
 993                 erxwr = nolock_regw_read(priv, ERXWRPTL);
 994                 erxrd = nolock_regw_read(priv, ERXRDPTL);
 995
 996                 if (erxwr > erxrd)
 997                         free_space = (erxnd - erxst) - (erxwr - erxrd);
 998                 else if (erxwr == erxrd)
 999                         free_space = (erxnd - erxst);
1000                 else
1001                         free_space = erxrd - erxwr - 1;
1002         }
1003         mutex_unlock(&priv->lock);
1004         if (netif_msg_rx_status(priv))
1005                 printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
1006                         __func__, free_space);
1007         return free_space;
1008 }
1009
1010 /*
1011  * Access the PHY to determine link status
1012  */
1013 static void enc28j60_check_link_status(struct net_device *ndev)
1014 {
1015         struct enc28j60_net *priv = netdev_priv(ndev);
1016         u16 reg;
1017         int duplex;
1018
1019         reg = enc28j60_phy_read(priv, PHSTAT2);
1020         if (netif_msg_hw(priv))
1021                 printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
1022                         "PHSTAT2: %04x\n", __func__,
1023                         enc28j60_phy_read(priv, PHSTAT1), reg);
1024         duplex = reg & PHSTAT2_DPXSTAT;
1025
1026         if (reg & PHSTAT2_LSTAT) {
1027                 netif_carrier_on(ndev);
1028                 if (netif_msg_ifup(priv))
1029                         dev_info(&ndev->dev, "link up - %s\n",
1030                                 duplex ? "Full duplex" : "Half duplex");
1031         } else {
1032                 if (netif_msg_ifdown(priv))
1033                         dev_info(&ndev->dev, "link down\n");
1034                 netif_carrier_off(ndev);
1035         }
1036 }
1037
1038 static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1039 {
1040         struct enc28j60_net *priv = netdev_priv(ndev);
1041
1042         if (err)
1043                 ndev->stats.tx_errors++;
1044         else
1045                 ndev->stats.tx_packets++;
1046
1047         if (priv->tx_skb) {
1048                 if (!err)
1049                         ndev->stats.tx_bytes += priv->tx_skb->len;
1050                 dev_kfree_skb(priv->tx_skb);
1051                 priv->tx_skb = NULL;
1052         }
1053         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1054         netif_wake_queue(ndev);
1055 }
1056
1057 /*
1058  * RX handler
1059  * ignore PKTIF because is unreliable! (look at the errata datasheet)
1060  * check EPKTCNT is the suggested workaround.
1061  * We don't need to clear interrupt flag, automatically done when
1062  * enc28j60_hw_rx() decrements the packet counter.
1063  * Returns how many packet processed.
1064  */
1065 static int enc28j60_rx_interrupt(struct net_device *ndev)
1066 {
1067         struct enc28j60_net *priv = netdev_priv(ndev);
1068         int pk_counter, ret;
1069
1070         pk_counter = locked_regb_read(priv, EPKTCNT);
1071         if (pk_counter && netif_msg_intr(priv))
1072                 printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
1073         if (pk_counter > priv->max_pk_counter) {
1074                 /* update statistics */
1075                 priv->max_pk_counter = pk_counter;
1076                 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1077                         printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
1078                                 priv->max_pk_counter);
1079         }
1080         ret = pk_counter;
1081         while (pk_counter-- > 0)
1082                 enc28j60_hw_rx(ndev);
1083
1084         return ret;
1085 }
1086
1087 static void enc28j60_irq_work_handler(struct work_struct *work)
1088 {
1089         struct enc28j60_net *priv =
1090                 container_of(work, struct enc28j60_net, irq_work);
1091         struct net_device *ndev = priv->netdev;
1092         int intflags, loop;
1093
1094         if (netif_msg_intr(priv))
1095                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1096         /* disable further interrupts */
1097         locked_reg_bfclr(priv, EIE, EIE_INTIE);
1098
1099         do {
1100                 loop = 0;
1101                 intflags = locked_regb_read(priv, EIR);
1102                 /* DMA interrupt handler (not currently used) */
1103                 if ((intflags & EIR_DMAIF) != 0) {
1104                         loop++;
1105                         if (netif_msg_intr(priv))
1106                                 printk(KERN_DEBUG DRV_NAME
1107                                         ": intDMA(%d)\n", loop);
1108                         locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1109                 }
1110                 /* LINK changed handler */
1111                 if ((intflags & EIR_LINKIF) != 0) {
1112                         loop++;
1113                         if (netif_msg_intr(priv))
1114                                 printk(KERN_DEBUG DRV_NAME
1115                                         ": intLINK(%d)\n", loop);
1116                         enc28j60_check_link_status(ndev);
1117                         /* read PHIR to clear the flag */
1118                         enc28j60_phy_read(priv, PHIR);
1119                 }
1120                 /* TX complete handler */
1121                 if ((intflags & EIR_TXIF) != 0) {
1122                         bool err = false;
1123                         loop++;
1124                         if (netif_msg_intr(priv))
1125                                 printk(KERN_DEBUG DRV_NAME
1126                                         ": intTX(%d)\n", loop);
1127                         priv->tx_retry_count = 0;
1128                         if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1129                                 if (netif_msg_tx_err(priv))
1130                                         dev_err(&ndev->dev,
1131                                                 "Tx Error (aborted)\n");
1132                                 err = true;
1133                         }
1134                         if (netif_msg_tx_done(priv)) {
1135                                 u8 tsv[TSV_SIZE];
1136                                 enc28j60_read_tsv(priv, tsv);
1137                                 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1138                         }
1139                         enc28j60_tx_clear(ndev, err);
1140                         locked_reg_bfclr(priv, EIR, EIR_TXIF);
1141                 }
1142                 /* TX Error handler */
1143                 if ((intflags & EIR_TXERIF) != 0) {
1144                         u8 tsv[TSV_SIZE];
1145
1146                         loop++;
1147                         if (netif_msg_intr(priv))
1148                                 printk(KERN_DEBUG DRV_NAME
1149                                         ": intTXErr(%d)\n", loop);
1150                         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1151                         enc28j60_read_tsv(priv, tsv);
1152                         if (netif_msg_tx_err(priv))
1153                                 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1154                         /* Reset TX logic */
1155                         mutex_lock(&priv->lock);
1156                         nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1157                         nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1158                         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1159                         mutex_unlock(&priv->lock);
1160                         /* Transmit Late collision check for retransmit */
1161                         if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1162                                 if (netif_msg_tx_err(priv))
1163                                         printk(KERN_DEBUG DRV_NAME
1164                                                 ": LateCollision TXErr (%d)\n",
1165                                                 priv->tx_retry_count);
1166                                 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1167                                         locked_reg_bfset(priv, ECON1,
1168                                                            ECON1_TXRTS);
1169                                 else
1170                                         enc28j60_tx_clear(ndev, true);
1171                         } else
1172                                 enc28j60_tx_clear(ndev, true);
1173                         locked_reg_bfclr(priv, EIR, EIR_TXERIF);
1174                 }
1175                 /* RX Error handler */
1176                 if ((intflags & EIR_RXERIF) != 0) {
1177                         loop++;
1178                         if (netif_msg_intr(priv))
1179                                 printk(KERN_DEBUG DRV_NAME
1180                                         ": intRXErr(%d)\n", loop);
1181                         /* Check free FIFO space to flag RX overrun */
1182                         if (enc28j60_get_free_rxfifo(priv) <= 0) {
1183                                 if (netif_msg_rx_err(priv))
1184                                         printk(KERN_DEBUG DRV_NAME
1185                                                 ": RX Overrun\n");
1186                                 ndev->stats.rx_dropped++;
1187                         }
1188                         locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1189                 }
1190                 /* RX handler */
1191                 if (enc28j60_rx_interrupt(ndev))
1192                         loop++;
1193         } while (loop);
1194
1195         /* re-enable interrupts */
1196         locked_reg_bfset(priv, EIE, EIE_INTIE);
1197         if (netif_msg_intr(priv))
1198                 printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
1199 }
1200
1201 /*
1202  * Hardware transmit function.
1203  * Fill the buffer memory and send the contents of the transmit buffer
1204  * onto the network
1205  */
1206 static void enc28j60_hw_tx(struct enc28j60_net *priv)
1207 {
1208         if (netif_msg_tx_queued(priv))
1209                 printk(KERN_DEBUG DRV_NAME
1210                         ": Tx Packet Len:%d\n", priv->tx_skb->len);
1211
1212         if (netif_msg_pktdata(priv))
1213                 dump_packet(__func__,
1214                             priv->tx_skb->len, priv->tx_skb->data);
1215         enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1216
1217 #ifdef CONFIG_ENC28J60_WRITEVERIFY
1218         /* readback and verify written data */
1219         if (netif_msg_drv(priv)) {
1220                 int test_len, k;
1221                 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1222                 int okflag;
1223
1224                 test_len = priv->tx_skb->len;
1225                 if (test_len > sizeof(test_buf))
1226                         test_len = sizeof(test_buf);
1227
1228                 /* + 1 to skip control byte */
1229                 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1230                 okflag = 1;
1231                 for (k = 0; k < test_len; k++) {
1232                         if (priv->tx_skb->data[k] != test_buf[k]) {
1233                                 printk(KERN_DEBUG DRV_NAME
1234                                          ": Error, %d location differ: "
1235                                          "0x%02x-0x%02x\n", k,
1236                                          priv->tx_skb->data[k], test_buf[k]);
1237                                 okflag = 0;
1238                         }
1239                 }
1240                 if (!okflag)
1241                         printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
1242                                 "verify ERROR!\n");
1243         }
1244 #endif
1245         /* set TX request flag */
1246         locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1247 }
1248
1249 static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
1250 {
1251         struct enc28j60_net *priv = netdev_priv(dev);
1252
1253         if (netif_msg_tx_queued(priv))
1254                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1255
1256         /* If some error occurs while trying to transmit this
1257          * packet, you should return '1' from this function.
1258          * In such a case you _may not_ do anything to the
1259          * SKB, it is still owned by the network queueing
1260          * layer when an error is returned.  This means you
1261          * may not modify any SKB fields, you may not free
1262          * the SKB, etc.
1263          */
1264         netif_stop_queue(dev);
1265
1266         /* save the timestamp */
1267         priv->netdev->trans_start = jiffies;
1268         /* Remember the skb for deferred processing */
1269         priv->tx_skb = skb;
1270         schedule_work(&priv->tx_work);
1271
1272         return 0;
1273 }
1274
1275 static void enc28j60_tx_work_handler(struct work_struct *work)
1276 {
1277         struct enc28j60_net *priv =
1278                 container_of(work, struct enc28j60_net, tx_work);
1279
1280         /* actual delivery of data */
1281         enc28j60_hw_tx(priv);
1282 }
1283
1284 static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1285 {
1286         struct enc28j60_net *priv = dev_id;
1287
1288         /*
1289          * Can't do anything in interrupt context because we need to
1290          * block (spi_sync() is blocking) so fire of the interrupt
1291          * handling workqueue.
1292          * Remember that we access enc28j60 registers through SPI bus
1293          * via spi_sync() call.
1294          */
1295         schedule_work(&priv->irq_work);
1296
1297         return IRQ_HANDLED;
1298 }
1299
1300 static void enc28j60_tx_timeout(struct net_device *ndev)
1301 {
1302         struct enc28j60_net *priv = netdev_priv(ndev);
1303
1304         if (netif_msg_timer(priv))
1305                 dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
1306
1307         ndev->stats.tx_errors++;
1308         /* can't restart safely under softirq */
1309         schedule_work(&priv->restart_work);
1310 }
1311
1312 /*
1313  * Open/initialize the board. This is called (in the current kernel)
1314  * sometime after booting when the 'ifconfig' program is run.
1315  *
1316  * This routine should set everything up anew at each open, even
1317  * registers that "should" only need to be set once at boot, so that
1318  * there is non-reboot way to recover if something goes wrong.
1319  */
1320 static int enc28j60_net_open(struct net_device *dev)
1321 {
1322         struct enc28j60_net *priv = netdev_priv(dev);
1323
1324         if (netif_msg_drv(priv))
1325                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1326
1327         if (!is_valid_ether_addr(dev->dev_addr)) {
1328                 if (netif_msg_ifup(priv))
1329                         dev_err(&dev->dev, "invalid MAC address %pM\n",
1330                                 dev->dev_addr);
1331                 return -EADDRNOTAVAIL;
1332         }
1333         /* Reset the hardware here (and take it out of low power mode) */
1334         enc28j60_lowpower(priv, false);
1335         enc28j60_hw_disable(priv);
1336         if (!enc28j60_hw_init(priv)) {
1337                 if (netif_msg_ifup(priv))
1338                         dev_err(&dev->dev, "hw_reset() failed\n");
1339                 return -EINVAL;
1340         }
1341         /* Update the MAC address (in case user has changed it) */
1342         enc28j60_set_hw_macaddr(dev);
1343         /* Enable interrupts */
1344         enc28j60_hw_enable(priv);
1345         /* check link status */
1346         enc28j60_check_link_status(dev);
1347         /* We are now ready to accept transmit requests from
1348          * the queueing layer of the networking.
1349          */
1350         netif_start_queue(dev);
1351
1352         return 0;
1353 }
1354
1355 /* The inverse routine to net_open(). */
1356 static int enc28j60_net_close(struct net_device *dev)
1357 {
1358         struct enc28j60_net *priv = netdev_priv(dev);
1359
1360         if (netif_msg_drv(priv))
1361                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1362
1363         enc28j60_hw_disable(priv);
1364         enc28j60_lowpower(priv, true);
1365         netif_stop_queue(dev);
1366
1367         return 0;
1368 }
1369
1370 /*
1371  * Set or clear the multicast filter for this adapter
1372  * num_addrs == -1      Promiscuous mode, receive all packets
1373  * num_addrs == 0       Normal mode, filter out multicast packets
1374  * num_addrs > 0        Multicast mode, receive normal and MC packets
1375  */
1376 static void enc28j60_set_multicast_list(struct net_device *dev)
1377 {
1378         struct enc28j60_net *priv = netdev_priv(dev);
1379         int oldfilter = priv->rxfilter;
1380
1381         if (dev->flags & IFF_PROMISC) {
1382                 if (netif_msg_link(priv))
1383                         dev_info(&dev->dev, "promiscuous mode\n");
1384                 priv->rxfilter = RXFILTER_PROMISC;
1385         } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
1386                 if (netif_msg_link(priv))
1387                         dev_info(&dev->dev, "%smulticast mode\n",
1388                                 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1389                 priv->rxfilter = RXFILTER_MULTI;
1390         } else {
1391                 if (netif_msg_link(priv))
1392                         dev_info(&dev->dev, "normal mode\n");
1393                 priv->rxfilter = RXFILTER_NORMAL;
1394         }
1395
1396         if (oldfilter != priv->rxfilter)
1397                 schedule_work(&priv->setrx_work);
1398 }
1399
1400 static void enc28j60_setrx_work_handler(struct work_struct *work)
1401 {
1402         struct enc28j60_net *priv =
1403                 container_of(work, struct enc28j60_net, setrx_work);
1404
1405         if (priv->rxfilter == RXFILTER_PROMISC) {
1406                 if (netif_msg_drv(priv))
1407                         printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
1408                 locked_regb_write(priv, ERXFCON, 0x00);
1409         } else if (priv->rxfilter == RXFILTER_MULTI) {
1410                 if (netif_msg_drv(priv))
1411                         printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
1412                 locked_regb_write(priv, ERXFCON,
1413                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1414                                         ERXFCON_BCEN | ERXFCON_MCEN);
1415         } else {
1416                 if (netif_msg_drv(priv))
1417                         printk(KERN_DEBUG DRV_NAME ": normal mode\n");
1418                 locked_regb_write(priv, ERXFCON,
1419                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1420                                         ERXFCON_BCEN);
1421         }
1422 }
1423
1424 static void enc28j60_restart_work_handler(struct work_struct *work)
1425 {
1426         struct enc28j60_net *priv =
1427                         container_of(work, struct enc28j60_net, restart_work);
1428         struct net_device *ndev = priv->netdev;
1429         int ret;
1430
1431         rtnl_lock();
1432         if (netif_running(ndev)) {
1433                 enc28j60_net_close(ndev);
1434                 ret = enc28j60_net_open(ndev);
1435                 if (unlikely(ret)) {
1436                         dev_info(&ndev->dev, " could not restart %d\n", ret);
1437                         dev_close(ndev);
1438                 }
1439         }
1440         rtnl_unlock();
1441 }
1442
1443 /* ......................... ETHTOOL SUPPORT ........................... */
1444
1445 static void
1446 enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1447 {
1448         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1449         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1450         strlcpy(info->bus_info,
1451                 dev_name(dev->dev.parent), sizeof(info->bus_info));
1452 }
1453
1454 static int
1455 enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1456 {
1457         struct enc28j60_net *priv = netdev_priv(dev);
1458
1459         cmd->transceiver = XCVR_INTERNAL;
1460         cmd->supported  = SUPPORTED_10baseT_Half
1461                         | SUPPORTED_10baseT_Full
1462                         | SUPPORTED_TP;
1463         cmd->speed      = SPEED_10;
1464         cmd->duplex     = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1465         cmd->port       = PORT_TP;
1466         cmd->autoneg    = AUTONEG_DISABLE;
1467
1468         return 0;
1469 }
1470
1471 static int
1472 enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1473 {
1474         return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
1475 }
1476
1477 static u32 enc28j60_get_msglevel(struct net_device *dev)
1478 {
1479         struct enc28j60_net *priv = netdev_priv(dev);
1480         return priv->msg_enable;
1481 }
1482
1483 static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1484 {
1485         struct enc28j60_net *priv = netdev_priv(dev);
1486         priv->msg_enable = val;
1487 }
1488
1489 static const struct ethtool_ops enc28j60_ethtool_ops = {
1490         .get_settings   = enc28j60_get_settings,
1491         .set_settings   = enc28j60_set_settings,
1492         .get_drvinfo    = enc28j60_get_drvinfo,
1493         .get_msglevel   = enc28j60_get_msglevel,
1494         .set_msglevel   = enc28j60_set_msglevel,
1495 };
1496
1497 static int enc28j60_chipset_init(struct net_device *dev)
1498 {
1499         struct enc28j60_net *priv = netdev_priv(dev);
1500
1501         return enc28j60_hw_init(priv);
1502 }
1503
1504 static int __devinit enc28j60_probe(struct spi_device *spi)
1505 {
1506         struct net_device *dev;
1507         struct enc28j60_net *priv;
1508         int ret = 0;
1509
1510         if (netif_msg_drv(&debug))
1511                 dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
1512                         DRV_VERSION);
1513
1514         dev = alloc_etherdev(sizeof(struct enc28j60_net));
1515         if (!dev) {
1516                 if (netif_msg_drv(&debug))
1517                         dev_err(&spi->dev, DRV_NAME
1518                                 ": unable to alloc new ethernet\n");
1519                 ret = -ENOMEM;
1520                 goto error_alloc;
1521         }
1522         priv = netdev_priv(dev);
1523
1524         priv->netdev = dev;     /* priv to netdev reference */
1525         priv->spi = spi;        /* priv to spi reference */
1526         priv->msg_enable = netif_msg_init(debug.msg_enable,
1527                                                 ENC28J60_MSG_DEFAULT);
1528         mutex_init(&priv->lock);
1529         INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1530         INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1531         INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1532         INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1533         dev_set_drvdata(&spi->dev, priv);       /* spi to priv reference */
1534         SET_NETDEV_DEV(dev, &spi->dev);
1535
1536         if (!enc28j60_chipset_init(dev)) {
1537                 if (netif_msg_probe(priv))
1538                         dev_info(&spi->dev, DRV_NAME " chip not found\n");
1539                 ret = -EIO;
1540                 goto error_irq;
1541         }
1542         random_ether_addr(dev->dev_addr);
1543         enc28j60_set_hw_macaddr(dev);
1544
1545         /* Board setup must set the relevant edge trigger type;
1546          * level triggers won't currently work.
1547          */
1548         ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
1549         if (ret < 0) {
1550                 if (netif_msg_probe(priv))
1551                         dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
1552                                 "(ret = %d)\n", spi->irq, ret);
1553                 goto error_irq;
1554         }
1555
1556         dev->if_port = IF_PORT_10BASET;
1557         dev->irq = spi->irq;
1558         dev->open = enc28j60_net_open;
1559         dev->stop = enc28j60_net_close;
1560         dev->hard_start_xmit = enc28j60_send_packet;
1561         dev->set_multicast_list = &enc28j60_set_multicast_list;
1562         dev->set_mac_address = enc28j60_set_mac_address;
1563         dev->tx_timeout = &enc28j60_tx_timeout;
1564         dev->watchdog_timeo = TX_TIMEOUT;
1565         SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
1566
1567         enc28j60_lowpower(priv, true);
1568
1569         ret = register_netdev(dev);
1570         if (ret) {
1571                 if (netif_msg_probe(priv))
1572                         dev_err(&spi->dev, "register netdev " DRV_NAME
1573                                 " failed (ret = %d)\n", ret);
1574                 goto error_register;
1575         }
1576         dev_info(&dev->dev, DRV_NAME " driver registered\n");
1577
1578         return 0;
1579
1580 error_register:
1581         free_irq(spi->irq, priv);
1582 error_irq:
1583         free_netdev(dev);
1584 error_alloc:
1585         return ret;
1586 }
1587
1588 static int __devexit enc28j60_remove(struct spi_device *spi)
1589 {
1590         struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
1591
1592         if (netif_msg_drv(priv))
1593                 printk(KERN_DEBUG DRV_NAME ": remove\n");
1594
1595         unregister_netdev(priv->netdev);
1596         free_irq(spi->irq, priv);
1597         free_netdev(priv->netdev);
1598
1599         return 0;
1600 }
1601
1602 static struct spi_driver enc28j60_driver = {
1603         .driver = {
1604                    .name = DRV_NAME,
1605                    .owner = THIS_MODULE,
1606          },
1607         .probe = enc28j60_probe,
1608         .remove = __devexit_p(enc28j60_remove),
1609 };
1610
1611 static int __init enc28j60_init(void)
1612 {
1613         msec20_to_jiffies = msecs_to_jiffies(20);
1614
1615         return spi_register_driver(&enc28j60_driver);
1616 }
1617
1618 module_init(enc28j60_init);
1619
1620 static void __exit enc28j60_exit(void)
1621 {
1622         spi_unregister_driver(&enc28j60_driver);
1623 }
1624
1625 module_exit(enc28j60_exit);
1626
1627 MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1628 MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1629 MODULE_LICENSE("GPL");
1630 module_param_named(debug, debug.msg_enable, int, 0);
1631 MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");