git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/utilities/utdebug.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utdebug - Debug print routines
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2007, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45
  46 #define _COMPONENT          ACPI_UTILITIES
  47 ACPI_MODULE_NAME("utdebug")
  48
  49 #ifdef ACPI_DEBUG_OUTPUT
  50 static acpi_thread_id acpi_gbl_prev_thread_id;
  51 static char *acpi_gbl_fn_entry_str = "----Entry";
  52 static char *acpi_gbl_fn_exit_str = "----Exit-";
  53
  54 /* Local prototypes */
  55
  56 static const char *acpi_ut_trim_function_name(const char *function_name);
  57
  58 /*******************************************************************************
  59  *
  60  * FUNCTION:    acpi_ut_init_stack_ptr_trace
  61  *
  62  * PARAMETERS:  None
  63  *
  64  * RETURN:      None
  65  *
  66  * DESCRIPTION: Save the current CPU stack pointer at subsystem startup
  67  *
  68  ******************************************************************************/
  69
  70 void acpi_ut_init_stack_ptr_trace(void)
  71 {
  72         u32 current_sp;
  73
  74         acpi_gbl_entry_stack_pointer = ACPI_PTR_DIFF(&current_sp, NULL);
  75 }
  76
  77 /*******************************************************************************
  78  *
  79  * FUNCTION:    acpi_ut_track_stack_ptr
  80  *
  81  * PARAMETERS:  None
  82  *
  83  * RETURN:      None
  84  *
  85  * DESCRIPTION: Save the current CPU stack pointer
  86  *
  87  ******************************************************************************/
  88
  89 void acpi_ut_track_stack_ptr(void)
  90 {
  91         acpi_size current_sp;
  92
  93         current_sp = ACPI_PTR_DIFF(&current_sp, NULL);
  94
  95         if (current_sp < acpi_gbl_lowest_stack_pointer) {
  96                 acpi_gbl_lowest_stack_pointer = current_sp;
  97         }
  98
  99         if (acpi_gbl_nesting_level > acpi_gbl_deepest_nesting) {
 100                 acpi_gbl_deepest_nesting = acpi_gbl_nesting_level;
 101         }
 102 }
 103
 104 /*******************************************************************************
 105  *
 106  * FUNCTION:    acpi_ut_trim_function_name
 107  *
 108  * PARAMETERS:  function_name       - Ascii string containing a procedure name
 109  *
 110  * RETURN:      Updated pointer to the function name
 111  *
 112  * DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
 113  *              This allows compiler macros such as __FUNCTION__ to be used
 114  *              with no change to the debug output.
 115  *
 116  ******************************************************************************/
 117
 118 static const char *acpi_ut_trim_function_name(const char *function_name)
 119 {
 120
 121         /* All Function names are longer than 4 chars, check is safe */
 122
 123         if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_MIXED) {
 124
 125                 /* This is the case where the original source has not been modified */
 126
 127                 return (function_name + 4);
 128         }
 129
 130         if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_LOWER) {
 131
 132                 /* This is the case where the source has been 'linuxized' */
 133
 134                 return (function_name + 5);
 135         }
 136
 137         return (function_name);
 138 }
 139
 140 /*******************************************************************************
 141  *
 142  * FUNCTION:    acpi_ut_debug_print
 143  *
 144  * PARAMETERS:  requested_debug_level - Requested debug print level
 145  *              line_number         - Caller's line number (for error output)
 146  *              function_name       - Caller's procedure name
 147  *              module_name         - Caller's module name
 148  *              component_id        - Caller's component ID
 149  *              Format              - Printf format field
 150  *              ...                 - Optional printf arguments
 151  *
 152  * RETURN:      None
 153  *
 154  * DESCRIPTION: Print error message with prefix consisting of the module name,
 155  *              line number, and component ID.
 156  *
 157  ******************************************************************************/
 158
 159 void ACPI_INTERNAL_VAR_XFACE
 160 acpi_ut_debug_print(u32 requested_debug_level,
 161                     u32 line_number,
 162                     const char *function_name,
 163                     char *module_name, u32 component_id, char *format, ...)
 164 {
 165         acpi_thread_id thread_id;
 166         va_list args;
 167
 168         /*
 169          * Stay silent if the debug level or component ID is disabled
 170          */
 171         if (!(requested_debug_level & acpi_dbg_level) ||
 172             !(component_id & acpi_dbg_layer)) {
 173                 return;
 174         }
 175
 176         /*
 177          * Thread tracking and context switch notification
 178          */
 179         thread_id = acpi_os_get_thread_id();
 180         if (thread_id != acpi_gbl_prev_thread_id) {
 181                 if (ACPI_LV_THREADS & acpi_dbg_level) {
 182                         acpi_os_printf
 183                             ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
 184                              (unsigned long)acpi_gbl_prev_thread_id, (unsigned long)thread_id);
 185                 }
 186
 187                 acpi_gbl_prev_thread_id = thread_id;
 188         }
 189
 190         /*
 191          * Display the module name, current line number, thread ID (if requested),
 192          * current procedure nesting level, and the current procedure name
 193          */
 194         acpi_os_printf("%8s-%04ld ", module_name, line_number);
 195
 196         if (ACPI_LV_THREADS & acpi_dbg_level) {
 197                 acpi_os_printf("[%04lX] ", (unsigned long)thread_id);
 198         }
 199
 200         acpi_os_printf("[%02ld] %-22.22s: ",
 201                        acpi_gbl_nesting_level,
 202                        acpi_ut_trim_function_name(function_name));
 203
 204         va_start(args, format);
 205         acpi_os_vprintf(format, args);
 206 }
 207
 208 ACPI_EXPORT_SYMBOL(acpi_ut_debug_print)
 209
 210 /*******************************************************************************
 211  *
 212  * FUNCTION:    acpi_ut_debug_print_raw
 213  *
 214  * PARAMETERS:  requested_debug_level - Requested debug print level
 215  *              line_number         - Caller's line number
 216  *              function_name       - Caller's procedure name
 217  *              module_name         - Caller's module name
 218  *              component_id        - Caller's component ID
 219  *              Format              - Printf format field
 220  *              ...                 - Optional printf arguments
 221  *
 222  * RETURN:      None
 223  *
 224  * DESCRIPTION: Print message with no headers.  Has same interface as
 225  *              debug_print so that the same macros can be used.
 226  *
 227  ******************************************************************************/
 228 void ACPI_INTERNAL_VAR_XFACE
 229 acpi_ut_debug_print_raw(u32 requested_debug_level,
 230                         u32 line_number,
 231                         const char *function_name,
 232                         char *module_name, u32 component_id, char *format, ...)
 233 {
 234         va_list args;
 235
 236         if (!(requested_debug_level & acpi_dbg_level) ||
 237             !(component_id & acpi_dbg_layer)) {
 238                 return;
 239         }
 240
 241         va_start(args, format);
 242         acpi_os_vprintf(format, args);
 243 }
 244
 245 ACPI_EXPORT_SYMBOL(acpi_ut_debug_print_raw)
 246
 247 /*******************************************************************************
 248  *
 249  * FUNCTION:    acpi_ut_trace
 250  *
 251  * PARAMETERS:  line_number         - Caller's line number
 252  *              function_name       - Caller's procedure name
 253  *              module_name         - Caller's module name
 254  *              component_id        - Caller's component ID
 255  *
 256  * RETURN:      None
 257  *
 258  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
 259  *              set in debug_level
 260  *
 261  ******************************************************************************/
 262 void
 263 acpi_ut_trace(u32 line_number,
 264               const char *function_name, char *module_name, u32 component_id)
 265 {
 266
 267         acpi_gbl_nesting_level++;
 268         acpi_ut_track_stack_ptr();
 269
 270         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 271                             line_number, function_name, module_name,
 272                             component_id, "%s\n", acpi_gbl_fn_entry_str);
 273 }
 274
 275 ACPI_EXPORT_SYMBOL(acpi_ut_trace)
 276
 277 /*******************************************************************************
 278  *
 279  * FUNCTION:    acpi_ut_trace_ptr
 280  *
 281  * PARAMETERS:  line_number         - Caller's line number
 282  *              function_name       - Caller's procedure name
 283  *              module_name         - Caller's module name
 284  *              component_id        - Caller's component ID
 285  *              Pointer             - Pointer to display
 286  *
 287  * RETURN:      None
 288  *
 289  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
 290  *              set in debug_level
 291  *
 292  ******************************************************************************/
 293 void
 294 acpi_ut_trace_ptr(u32 line_number,
 295                   const char *function_name,
 296                   char *module_name, u32 component_id, void *pointer)
 297 {
 298         acpi_gbl_nesting_level++;
 299         acpi_ut_track_stack_ptr();
 300
 301         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 302                             line_number, function_name, module_name,
 303                             component_id, "%s %p\n", acpi_gbl_fn_entry_str,
 304                             pointer);
 305 }
 306
 307 /*******************************************************************************
 308  *
 309  * FUNCTION:    acpi_ut_trace_str
 310  *
 311  * PARAMETERS:  line_number         - Caller's line number
 312  *              function_name       - Caller's procedure name
 313  *              module_name         - Caller's module name
 314  *              component_id        - Caller's component ID
 315  *              String              - Additional string to display
 316  *
 317  * RETURN:      None
 318  *
 319  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
 320  *              set in debug_level
 321  *
 322  ******************************************************************************/
 323
 324 void
 325 acpi_ut_trace_str(u32 line_number,
 326                   const char *function_name,
 327                   char *module_name, u32 component_id, char *string)
 328 {
 329
 330         acpi_gbl_nesting_level++;
 331         acpi_ut_track_stack_ptr();
 332
 333         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 334                             line_number, function_name, module_name,
 335                             component_id, "%s %s\n", acpi_gbl_fn_entry_str,
 336                             string);
 337 }
 338
 339 /*******************************************************************************
 340  *
 341  * FUNCTION:    acpi_ut_trace_u32
 342  *
 343  * PARAMETERS:  line_number         - Caller's line number
 344  *              function_name       - Caller's procedure name
 345  *              module_name         - Caller's module name
 346  *              component_id        - Caller's component ID
 347  *              Integer             - Integer to display
 348  *
 349  * RETURN:      None
 350  *
 351  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
 352  *              set in debug_level
 353  *
 354  ******************************************************************************/
 355
 356 void
 357 acpi_ut_trace_u32(u32 line_number,
 358                   const char *function_name,
 359                   char *module_name, u32 component_id, u32 integer)
 360 {
 361
 362         acpi_gbl_nesting_level++;
 363         acpi_ut_track_stack_ptr();
 364
 365         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 366                             line_number, function_name, module_name,
 367                             component_id, "%s %08X\n", acpi_gbl_fn_entry_str,
 368                             integer);
 369 }
 370
 371 /*******************************************************************************
 372  *
 373  * FUNCTION:    acpi_ut_exit
 374  *
 375  * PARAMETERS:  line_number         - Caller's line number
 376  *              function_name       - Caller's procedure name
 377  *              module_name         - Caller's module name
 378  *              component_id        - Caller's component ID
 379  *
 380  * RETURN:      None
 381  *
 382  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
 383  *              set in debug_level
 384  *
 385  ******************************************************************************/
 386
 387 void
 388 acpi_ut_exit(u32 line_number,
 389              const char *function_name, char *module_name, u32 component_id)
 390 {
 391
 392         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 393                             line_number, function_name, module_name,
 394                             component_id, "%s\n", acpi_gbl_fn_exit_str);
 395
 396         acpi_gbl_nesting_level--;
 397 }
 398
 399 ACPI_EXPORT_SYMBOL(acpi_ut_exit)
 400
 401 /*******************************************************************************
 402  *
 403  * FUNCTION:    acpi_ut_status_exit
 404  *
 405  * PARAMETERS:  line_number         - Caller's line number
 406  *              function_name       - Caller's procedure name
 407  *              module_name         - Caller's module name
 408  *              component_id        - Caller's component ID
 409  *              Status              - Exit status code
 410  *
 411  * RETURN:      None
 412  *
 413  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
 414  *              set in debug_level. Prints exit status also.
 415  *
 416  ******************************************************************************/
 417 void
 418 acpi_ut_status_exit(u32 line_number,
 419                     const char *function_name,
 420                     char *module_name, u32 component_id, acpi_status status)
 421 {
 422
 423         if (ACPI_SUCCESS(status)) {
 424                 acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 425                                     line_number, function_name, module_name,
 426                                     component_id, "%s %s\n",
 427                                     acpi_gbl_fn_exit_str,
 428                                     acpi_format_exception(status));
 429         } else {
 430                 acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 431                                     line_number, function_name, module_name,
 432                                     component_id, "%s ****Exception****: %s\n",
 433                                     acpi_gbl_fn_exit_str,
 434                                     acpi_format_exception(status));
 435         }
 436
 437         acpi_gbl_nesting_level--;
 438 }
 439
 440 ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
 441
 442 /*******************************************************************************
 443  *
 444  * FUNCTION:    acpi_ut_value_exit
 445  *
 446  * PARAMETERS:  line_number         - Caller's line number
 447  *              function_name       - Caller's procedure name
 448  *              module_name         - Caller's module name
 449  *              component_id        - Caller's component ID
 450  *              Value               - Value to be printed with exit msg
 451  *
 452  * RETURN:      None
 453  *
 454  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
 455  *              set in debug_level. Prints exit value also.
 456  *
 457  ******************************************************************************/
 458 void
 459 acpi_ut_value_exit(u32 line_number,
 460                    const char *function_name,
 461                    char *module_name, u32 component_id, acpi_integer value)
 462 {
 463
 464         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 465                             line_number, function_name, module_name,
 466                             component_id, "%s %8.8X%8.8X\n",
 467                             acpi_gbl_fn_exit_str, ACPI_FORMAT_UINT64(value));
 468
 469         acpi_gbl_nesting_level--;
 470 }
 471
 472 ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
 473
 474 /*******************************************************************************
 475  *
 476  * FUNCTION:    acpi_ut_ptr_exit
 477  *
 478  * PARAMETERS:  line_number         - Caller's line number
 479  *              function_name       - Caller's procedure name
 480  *              module_name         - Caller's module name
 481  *              component_id        - Caller's component ID
 482  *              Ptr                 - Pointer to display
 483  *
 484  * RETURN:      None
 485  *
 486  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
 487  *              set in debug_level. Prints exit value also.
 488  *
 489  ******************************************************************************/
 490 void
 491 acpi_ut_ptr_exit(u32 line_number,
 492                  const char *function_name,
 493                  char *module_name, u32 component_id, u8 * ptr)
 494 {
 495
 496         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
 497                             line_number, function_name, module_name,
 498                             component_id, "%s %p\n", acpi_gbl_fn_exit_str, ptr);
 499
 500         acpi_gbl_nesting_level--;
 501 }
 502
 503 #endif
 504
 505 /*******************************************************************************
 506  *
 507  * FUNCTION:    acpi_ut_dump_buffer
 508  *
 509  * PARAMETERS:  Buffer              - Buffer to dump
 510  *              Count               - Amount to dump, in bytes
 511  *              Display             - BYTE, WORD, DWORD, or QWORD display
 512  *              component_iD        - Caller's component ID
 513  *
 514  * RETURN:      None
 515  *
 516  * DESCRIPTION: Generic dump buffer in both hex and ascii.
 517  *
 518  ******************************************************************************/
 519
 520 void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
 521 {
 522         acpi_native_uint i = 0;
 523         acpi_native_uint j;
 524         u32 temp32;
 525         u8 buf_char;
 526
 527         if ((count < 4) || (count & 0x01)) {
 528                 display = DB_BYTE_DISPLAY;
 529         }
 530
 531         /* Nasty little dump buffer routine! */
 532
 533         while (i < count) {
 534
 535                 /* Print current offset */
 536
 537                 acpi_os_printf("%6.4X: ", (u32) i);
 538
 539                 /* Print 16 hex chars */
 540
 541                 for (j = 0; j < 16;) {
 542                         if (i + j >= count) {
 543
 544                                 /* Dump fill spaces */
 545
 546                                 acpi_os_printf("%*s", ((display * 2) + 1), " ");
 547                                 j += (acpi_native_uint) display;
 548                                 continue;
 549                         }
 550
 551                         switch (display) {
 552                         case DB_BYTE_DISPLAY:
 553                         default:        /* Default is BYTE display */
 554
 555                                 acpi_os_printf("%02X ", buffer[i + j]);
 556                                 break;
 557
 558                         case DB_WORD_DISPLAY:
 559
 560                                 ACPI_MOVE_16_TO_32(&temp32, &buffer[i + j]);
 561                                 acpi_os_printf("%04X ", temp32);
 562                                 break;
 563
 564                         case DB_DWORD_DISPLAY:
 565
 566                                 ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j]);
 567                                 acpi_os_printf("%08X ", temp32);
 568                                 break;
 569
 570                         case DB_QWORD_DISPLAY:
 571
 572                                 ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j]);
 573                                 acpi_os_printf("%08X", temp32);
 574
 575                                 ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j + 4]);
 576                                 acpi_os_printf("%08X ", temp32);
 577                                 break;
 578                         }
 579
 580                         j += (acpi_native_uint) display;
 581                 }
 582
 583                 /*
 584                  * Print the ASCII equivalent characters but watch out for the bad
 585                  * unprintable ones (printable chars are 0x20 through 0x7E)
 586                  */
 587                 acpi_os_printf(" ");
 588                 for (j = 0; j < 16; j++) {
 589                         if (i + j >= count) {
 590                                 acpi_os_printf("\n");
 591                                 return;
 592                         }
 593
 594                         buf_char = buffer[i + j];
 595                         if (ACPI_IS_PRINT(buf_char)) {
 596                                 acpi_os_printf("%c", buf_char);
 597                         } else {
 598                                 acpi_os_printf(".");
 599                         }
 600                 }
 601
 602                 /* Done with that line. */
 603
 604                 acpi_os_printf("\n");
 605                 i += 16;
 606         }
 607
 608         return;
 609 }
 610
 611 /*******************************************************************************
 612  *
 613  * FUNCTION:    acpi_ut_dump_buffer
 614  *
 615  * PARAMETERS:  Buffer              - Buffer to dump
 616  *              Count               - Amount to dump, in bytes
 617  *              Display             - BYTE, WORD, DWORD, or QWORD display
 618  *              component_iD        - Caller's component ID
 619  *
 620  * RETURN:      None
 621  *
 622  * DESCRIPTION: Generic dump buffer in both hex and ascii.
 623  *
 624  ******************************************************************************/
 625
 626 void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
 627 {
 628
 629         /* Only dump the buffer if tracing is enabled */
 630
 631         if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
 632               (component_id & acpi_dbg_layer))) {
 633                 return;
 634         }
 635
 636         acpi_ut_dump_buffer2(buffer, count, display);
 637 }