Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6] / drivers / pcmcia / au1000_pb1x00.c
1 /*
2  *
3  * Alchemy Semi Pb1x00 boards specific pcmcia routines.
4  *
5  * Copyright 2002 MontaVista Software Inc.
6  * Author: MontaVista Software, Inc.
7  *              ppopov@mvista.com or source@mvista.com
8  *
9  * ########################################################################
10  *
11  *  This program is free software; you can distribute it and/or modify it
12  *  under the terms of the GNU General Public License (Version 2) as
13  *  published by the Free Software Foundation.
14  *
15  *  This program is distributed in the hope it will be useful, but WITHOUT
16  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
17  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
18  *  for more details.
19  *
20  *  You should have received a copy of the GNU General Public License along
21  *  with this program; if not, write to the Free Software Foundation, Inc.,
22  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
23  */
24 #include <linux/config.h>
25 #include <linux/module.h>
26 #include <linux/init.h>
27 #include <linux/delay.h>
28 #include <linux/ioport.h>
29 #include <linux/kernel.h>
30 #include <linux/tqueue.h>
31 #include <linux/timer.h>
32 #include <linux/mm.h>
33 #include <linux/proc_fs.h>
34 #include <linux/types.h>
35
36 #include <pcmcia/cs_types.h>
37 #include <pcmcia/cs.h>
38 #include <pcmcia/ss.h>
39 #include <pcmcia/bulkmem.h>
40 #include <pcmcia/cistpl.h>
41 #include <pcmcia/bus_ops.h>
42 #include "cs_internal.h"
43
44 #include <asm/io.h>
45 #include <asm/irq.h>
46 #include <asm/system.h>
47
48 #include <asm/au1000.h>
49 #include <asm/au1000_pcmcia.h>
50
51 #define debug(fmt, arg...) do { } while (0)
52
53 #ifdef CONFIG_MIPS_PB1000
54 #include <asm/pb1000.h>
55 #define PCMCIA_IRQ AU1000_GPIO_15
56 #elif defined (CONFIG_MIPS_PB1500)
57 #include <asm/pb1500.h>
58 #define PCMCIA_IRQ AU1500_GPIO_203
59 #elif defined (CONFIG_MIPS_PB1100)
60 #include <asm/pb1100.h>
61 #define PCMCIA_IRQ AU1000_GPIO_11
62 #endif
63
64 static int pb1x00_pcmcia_init(struct pcmcia_init *init)
65 {
66 #ifdef CONFIG_MIPS_PB1000
67         u16 pcr;
68         pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
69
70         au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */
71         au_sync_delay(100);
72         au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */
73         au_sync();
74
75         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
76         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
77         au_writel(pcr, PB1000_PCR);
78         au_sync_delay(20);
79           
80         return PCMCIA_NUM_SOCKS;
81
82 #else /* fixme -- take care of the Pb1500 at some point */
83
84         u16 pcr;
85         pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
86         pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
87         au_writew(pcr, PCMCIA_BOARD_REG);
88         au_sync_delay(500);
89         return PCMCIA_NUM_SOCKS;
90 #endif
91 }
92
93 static int pb1x00_pcmcia_shutdown(void)
94 {
95 #ifdef CONFIG_MIPS_PB1000
96         u16 pcr;
97         pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
98         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
99         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
100         au_writel(pcr, PB1000_PCR);
101         au_sync_delay(20);
102         return 0;
103 #else
104         u16 pcr;
105         pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
106         pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
107         au_writew(pcr, PCMCIA_BOARD_REG);
108         au_sync_delay(2);
109         return 0;
110 #endif
111 }
112
113 static int 
114 pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
115 {
116         u32 inserted0, inserted1;
117         u16 vs0, vs1;
118
119 #ifdef CONFIG_MIPS_PB1000
120         vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
121         inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
122         inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
123         vs0 = (vs0 >> 4) & 0x3;
124         vs1 = (vs1 >> 12) & 0x3;
125 #else
126         vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3;
127 #ifdef CONFIG_MIPS_PB1500
128         inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */
129 #else /* Pb1100 */
130         inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */
131 #endif
132         inserted1 = 0;
133 #endif
134
135         state->ready = 0;
136         state->vs_Xv = 0;
137         state->vs_3v = 0;
138         state->detect = 0;
139
140         if (sock == 0) {
141                 if (inserted0) {
142                         switch (vs0) {
143                                 case 0:
144                                 case 2:
145                                         state->vs_3v=1;
146                                         break;
147                                 case 3: /* 5V */
148                                         break;
149                                 default:
150                                         /* return without setting 'detect' */
151                                         printk(KERN_ERR "pb1x00 bad VS (%d)\n",
152                                                         vs0);
153                                         return 0;
154                         }
155                         state->detect = 1;
156                 }
157         }
158         else  {
159                 if (inserted1) {
160                         switch (vs1) {
161                                 case 0:
162                                 case 2:
163                                         state->vs_3v=1;
164                                         break;
165                                 case 3: /* 5V */
166                                         break;
167                                 default:
168                                         /* return without setting 'detect' */
169                                         printk(KERN_ERR "pb1x00 bad VS (%d)\n",
170                                                         vs1);
171                                         return 0;
172                         }
173                         state->detect = 1;
174                 }
175         }
176
177         if (state->detect) {
178                 state->ready = 1;
179         }
180
181         state->bvd1=1;
182         state->bvd2=1;
183         state->wrprot=0; 
184         return 1;
185 }
186
187
188 static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
189 {
190
191         if(info->sock > PCMCIA_MAX_SOCK) return -1;
192
193         /*
194          * Even in the case of the Pb1000, both sockets are connected
195          * to the same irq line.
196          */
197         info->irq = PCMCIA_IRQ;
198
199         return 0;
200 }
201
202
203 static int 
204 pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
205 {
206         u16 pcr;
207
208         if(configure->sock > PCMCIA_MAX_SOCK) return -1;
209
210 #ifdef CONFIG_MIPS_PB1000
211         pcr = au_readl(PB1000_PCR);
212
213         if (configure->sock == 0) {
214                 pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 | 
215                                 PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1);
216         }
217         else  {
218                 pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 | 
219                                 PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1);
220         }
221
222         pcr &= ~PCR_SLOT_0_RST;
223         debug("Vcc %dV Vpp %dV, pcr %x\n", 
224                         configure->vcc, configure->vpp, pcr);
225         switch(configure->vcc){
226                 case 0:  /* Vcc 0 */
227                         switch(configure->vpp) {
228                                 case 0:
229                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND,
230                                                         configure->sock);
231                                         break;
232                                 case 12:
233                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V,
234                                                         configure->sock);
235                                         break;
236                                 case 50:
237                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V,
238                                                         configure->sock);
239                                         break;
240                                 case 33:
241                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V,
242                                                         configure->sock);
243                                         break;
244                                 default:
245                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
246                                                         configure->sock);
247                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
248                                                         __FUNCTION__, 
249                                                         configure->vcc, 
250                                                         configure->vpp);
251                                         break;
252                         }
253                         break;
254                 case 50: /* Vcc 5V */
255                         switch(configure->vpp) {
256                                 case 0:
257                                         pcr |= SET_VCC_VPP(VCC_5V,VPP_GND,
258                                                         configure->sock);
259                                         break;
260                                 case 50:
261                                         pcr |= SET_VCC_VPP(VCC_5V,VPP_5V,
262                                                         configure->sock);
263                                         break;
264                                 case 12:
265                                         pcr |= SET_VCC_VPP(VCC_5V,VPP_12V,
266                                                         configure->sock);
267                                         break;
268                                 case 33:
269                                         pcr |= SET_VCC_VPP(VCC_5V,VPP_3V,
270                                                         configure->sock);
271                                         break;
272                                 default:
273                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
274                                                         configure->sock);
275                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
276                                                         __FUNCTION__, 
277                                                         configure->vcc, 
278                                                         configure->vpp);
279                                         break;
280                         }
281                         break;
282                 case 33: /* Vcc 3.3V */
283                         switch(configure->vpp) {
284                                 case 0:
285                                         pcr |= SET_VCC_VPP(VCC_3V,VPP_GND,
286                                                         configure->sock);
287                                         break;
288                                 case 50:
289                                         pcr |= SET_VCC_VPP(VCC_3V,VPP_5V,
290                                                         configure->sock);
291                                         break;
292                                 case 12:
293                                         pcr |= SET_VCC_VPP(VCC_3V,VPP_12V,
294                                                         configure->sock);
295                                         break;
296                                 case 33:
297                                         pcr |= SET_VCC_VPP(VCC_3V,VPP_3V,
298                                                         configure->sock);
299                                         break;
300                                 default:
301                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
302                                                         configure->sock);
303                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
304                                                         __FUNCTION__, 
305                                                         configure->vcc, 
306                                                         configure->vpp);
307                                         break;
308                         }
309                         break;
310                 default: /* what's this ? */
311                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
312                         printk(KERN_ERR "%s: bad Vcc %d\n", 
313                                         __FUNCTION__, configure->vcc);
314                         break;
315         }
316
317         if (configure->sock == 0) {
318         pcr &= ~(PCR_SLOT_0_RST);
319                 if (configure->reset)
320                 pcr |= PCR_SLOT_0_RST;
321         }
322         else {
323                 pcr &= ~(PCR_SLOT_1_RST);
324                 if (configure->reset)
325                         pcr |= PCR_SLOT_1_RST;
326         }
327         au_writel(pcr, PB1000_PCR);
328         au_sync_delay(300);
329
330 #else
331
332         pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf;
333
334         debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n", 
335                         configure->vcc, configure->vpp, pcr, configure->reset);
336
337
338         switch(configure->vcc){
339                 case 0:  /* Vcc 0 */
340                         pcr |= SET_VCC_VPP(0,0);
341                         break;
342                 case 50: /* Vcc 5V */
343                         switch(configure->vpp) {
344                                 case 0:
345                                         pcr |= SET_VCC_VPP(2,0);
346                                         break;
347                                 case 50:
348                                         pcr |= SET_VCC_VPP(2,1);
349                                         break;
350                                 case 12:
351                                         pcr |= SET_VCC_VPP(2,2);
352                                         break;
353                                 case 33:
354                                 default:
355                                         pcr |= SET_VCC_VPP(0,0);
356                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
357                                                         __FUNCTION__, 
358                                                         configure->vcc, 
359                                                         configure->vpp);
360                                         break;
361                         }
362                         break;
363                 case 33: /* Vcc 3.3V */
364                         switch(configure->vpp) {
365                                 case 0:
366                                         pcr |= SET_VCC_VPP(1,0);
367                                         break;
368                                 case 12:
369                                         pcr |= SET_VCC_VPP(1,2);
370                                         break;
371                                 case 33:
372                                         pcr |= SET_VCC_VPP(1,1);
373                                         break;
374                                 case 50:
375                                 default:
376                                         pcr |= SET_VCC_VPP(0,0);
377                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
378                                                         __FUNCTION__, 
379                                                         configure->vcc, 
380                                                         configure->vpp);
381                                         break;
382                         }
383                         break;
384                 default: /* what's this ? */
385                         pcr |= SET_VCC_VPP(0,0);
386                         printk(KERN_ERR "%s: bad Vcc %d\n", 
387                                         __FUNCTION__, configure->vcc);
388                         break;
389         }
390
391         au_writew(pcr, PCMCIA_BOARD_REG);
392         au_sync_delay(300);
393
394         if (!configure->reset) {
395                 pcr |= PC_DRV_EN;
396                 au_writew(pcr, PCMCIA_BOARD_REG);
397                 au_sync_delay(100);
398                 pcr |= PC_DEASSERT_RST;
399                 au_writew(pcr, PCMCIA_BOARD_REG);
400                 au_sync_delay(100);
401         }
402         else {
403                 pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
404                 au_writew(pcr, PCMCIA_BOARD_REG);
405                 au_sync_delay(100);
406         }
407 #endif
408         return 0;
409 }
410
411
412 struct pcmcia_low_level pb1x00_pcmcia_ops = { 
413         pb1x00_pcmcia_init,
414         pb1x00_pcmcia_shutdown,
415         pb1x00_pcmcia_socket_state,
416         pb1x00_pcmcia_get_irq_info,
417         pb1x00_pcmcia_configure_socket
418 };