git.oblomov.eu Git - linux-2.6/blob - arch/arm/plat-omap/usb.c

   1 /*
   2  * arch/arm/plat-omap/usb.c -- platform level USB initialization
   3  *
   4  * Copyright (C) 2004 Texas Instruments, Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20
  21 #undef  DEBUG
  22
  23 #include <linux/config.h>
  24 #include <linux/module.h>
  25 #include <linux/kernel.h>
  26 #include <linux/types.h>
  27 #include <linux/errno.h>
  28 #include <linux/init.h>
  29 #include <linux/device.h>
  30 #include <linux/usb_otg.h>
  31
  32 #include <asm/io.h>
  33 #include <asm/irq.h>
  34 #include <asm/system.h>
  35 #include <asm/hardware.h>
  36 #include <asm/mach-types.h>
  37
  38 #include <asm/arch/mux.h>
  39 #include <asm/arch/usb.h>
  40 #include <asm/arch/board.h>
  41
  42 /* These routines should handle the standard chip-specific modes
  43  * for usb0/1/2 ports, covering basic mux and transceiver setup.
  44  *
  45  * Some board-*.c files will need to set up additional mux options,
  46  * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
  47  */
  48
  49 /* TESTED ON:
  50  *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
  51  *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
  52  *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
  53  *  - 1510 Innovator UDC with bundled usb0 cable
  54  *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
  55  *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
  56  *  - 1710 custom development board using alternate pin group
  57  *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
  58  */
  59
  60 /*-------------------------------------------------------------------------*/
  61
  62 #ifdef  CONFIG_ARCH_OMAP_OTG
  63
  64 static struct otg_transceiver *xceiv;
  65
  66 /**
  67  * otg_get_transceiver - find the (single) OTG transceiver driver
  68  *
  69  * Returns the transceiver driver, after getting a refcount to it; or
  70  * null if there is no such transceiver.  The caller is responsible for
  71  * releasing that count.
  72  */
  73 struct otg_transceiver *otg_get_transceiver(void)
  74 {
  75         if (xceiv)
  76                 get_device(xceiv->dev);
  77         return xceiv;
  78 }
  79 EXPORT_SYMBOL(otg_get_transceiver);
  80
  81 int otg_set_transceiver(struct otg_transceiver *x)
  82 {
  83         if (xceiv && x)
  84                 return -EBUSY;
  85         xceiv = x;
  86         return 0;
  87 }
  88 EXPORT_SYMBOL(otg_set_transceiver);
  89
  90 #endif
  91
  92 /*-------------------------------------------------------------------------*/
  93
  94 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
  95 {
  96         u32     syscon1 = 0;
  97
  98         if (nwires == 0) {
  99                 if (!cpu_is_omap15xx()) {
 100                         /* pulldown D+/D- */
 101                         USB_TRANSCEIVER_CTRL_REG &= ~(3 << 1);
 102                 }
 103                 return 0;
 104         }
 105
 106         if (is_device)
 107                 omap_cfg_reg(W4_USB_PUEN);
 108
 109         /* internal transceiver */
 110         if (nwires == 2) {
 111                 // omap_cfg_reg(P9_USB_DP);
 112                 // omap_cfg_reg(R8_USB_DM);
 113
 114                 if (cpu_is_omap15xx()) {
 115                         /* This works on 1510-Innovator */
 116                         return 0;
 117                 }
 118
 119                 /* NOTES:
 120                  *  - peripheral should configure VBUS detection!
 121                  *  - only peripherals may use the internal D+/D- pulldowns
 122                  *  - OTG support on this port not yet written
 123                  */
 124
 125                 USB_TRANSCEIVER_CTRL_REG &= ~(7 << 4);
 126                 if (!is_device)
 127                         USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
 128
 129                 return 3 << 16;
 130         }
 131
 132         /* alternate pin config, external transceiver */
 133         if (cpu_is_omap15xx()) {
 134                 printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
 135                 return 0;
 136         }
 137
 138         omap_cfg_reg(V6_USB0_TXD);
 139         omap_cfg_reg(W9_USB0_TXEN);
 140         omap_cfg_reg(W5_USB0_SE0);
 141
 142         /* NOTE:  SPEED and SUSP aren't configured here */
 143
 144         if (nwires != 3)
 145                 omap_cfg_reg(Y5_USB0_RCV);
 146         if (nwires != 6)
 147                 USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
 148
 149         switch (nwires) {
 150         case 3:
 151                 syscon1 = 2;
 152                 break;
 153         case 4:
 154                 syscon1 = 1;
 155                 break;
 156         case 6:
 157                 syscon1 = 3;
 158                 omap_cfg_reg(AA9_USB0_VP);
 159                 omap_cfg_reg(R9_USB0_VM);
 160                 USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
 161                 break;
 162         default:
 163                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 164                         0, nwires);
 165         }
 166         return syscon1 << 16;
 167 }
 168
 169 static u32 __init omap_usb1_init(unsigned nwires)
 170 {
 171         u32     syscon1 = 0;
 172
 173         if (nwires != 6 && !cpu_is_omap15xx())
 174                 USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
 175         if (nwires == 0)
 176                 return 0;
 177
 178         /* external transceiver */
 179         omap_cfg_reg(USB1_TXD);
 180         omap_cfg_reg(USB1_TXEN);
 181         if (cpu_is_omap15xx()) {
 182                 omap_cfg_reg(USB1_SEO);
 183                 omap_cfg_reg(USB1_SPEED);
 184                 // SUSP
 185         } else if (cpu_is_omap1610() || cpu_is_omap5912()) {
 186                 omap_cfg_reg(W13_1610_USB1_SE0);
 187                 omap_cfg_reg(R13_1610_USB1_SPEED);
 188                 // SUSP
 189         } else if (cpu_is_omap1710()) {
 190                 omap_cfg_reg(R13_1710_USB1_SE0);
 191                 // SUSP
 192         } else {
 193                 pr_debug("usb unrecognized\n");
 194         }
 195         if (nwires != 3)
 196                 omap_cfg_reg(USB1_RCV);
 197
 198         switch (nwires) {
 199         case 3:
 200                 syscon1 = 2;
 201                 break;
 202         case 4:
 203                 syscon1 = 1;
 204                 break;
 205         case 6:
 206                 syscon1 = 3;
 207                 omap_cfg_reg(USB1_VP);
 208                 omap_cfg_reg(USB1_VM);
 209                 if (!cpu_is_omap15xx())
 210                         USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R;
 211                 break;
 212         default:
 213                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 214                         1, nwires);
 215         }
 216         return syscon1 << 20;
 217 }
 218
 219 static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 220 {
 221         u32     syscon1 = 0;
 222
 223         /* NOTE erratum: must leave USB2_UNI_R set if usb0 in use */
 224         if (alt_pingroup || nwires == 0)
 225                 return 0;
 226         if (nwires != 6 && !cpu_is_omap15xx())
 227                 USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
 228
 229         /* external transceiver */
 230         if (cpu_is_omap15xx()) {
 231                 omap_cfg_reg(USB2_TXD);
 232                 omap_cfg_reg(USB2_TXEN);
 233                 omap_cfg_reg(USB2_SEO);
 234                 if (nwires != 3)
 235                         omap_cfg_reg(USB2_RCV);
 236                 /* there is no USB2_SPEED */
 237         } else if (cpu_is_omap16xx()) {
 238                 omap_cfg_reg(V6_USB2_TXD);
 239                 omap_cfg_reg(W9_USB2_TXEN);
 240                 omap_cfg_reg(W5_USB2_SE0);
 241                 if (nwires != 3)
 242                         omap_cfg_reg(Y5_USB2_RCV);
 243                 // FIXME omap_cfg_reg(USB2_SPEED);
 244         } else {
 245                 pr_debug("usb unrecognized\n");
 246         }
 247         // omap_cfg_reg(USB2_SUSP);
 248
 249         switch (nwires) {
 250         case 3:
 251                 syscon1 = 2;
 252                 break;
 253         case 4:
 254                 syscon1 = 1;
 255                 break;
 256         case 6:
 257                 syscon1 = 3;
 258                 if (cpu_is_omap15xx()) {
 259                         omap_cfg_reg(USB2_VP);
 260                         omap_cfg_reg(USB2_VM);
 261                 } else {
 262                         omap_cfg_reg(AA9_USB2_VP);
 263                         omap_cfg_reg(R9_USB2_VM);
 264                         USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
 265                 }
 266                 break;
 267         default:
 268                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 269                         2, nwires);
 270         }
 271         return syscon1 << 24;
 272 }
 273
 274 /*-------------------------------------------------------------------------*/
 275
 276 #if     defined(CONFIG_USB_GADGET_OMAP) || \
 277         defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
 278         (defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
 279 static void usb_release(struct device *dev)
 280 {
 281         /* normally not freed */
 282 }
 283 #endif
 284
 285 #ifdef  CONFIG_USB_GADGET_OMAP
 286
 287 static struct resource udc_resources[] = {
 288         /* order is significant! */
 289         {               /* registers */
 290                 .start          = UDC_BASE,
 291                 .end            = UDC_BASE + 0xff,
 292                 .flags          = IORESOURCE_MEM,
 293         }, {            /* general IRQ */
 294                 .start          = IH2_BASE + 20,
 295                 .flags          = IORESOURCE_IRQ,
 296         }, {            /* PIO IRQ */
 297                 .start          = IH2_BASE + 30,
 298                 .flags          = IORESOURCE_IRQ,
 299         }, {            /* SOF IRQ */
 300                 .start          = IH2_BASE + 29,
 301                 .flags          = IORESOURCE_IRQ,
 302         },
 303 };
 304
 305 static u64 udc_dmamask = ~(u32)0;
 306
 307 static struct platform_device udc_device = {
 308         .name           = "omap_udc",
 309         .id             = -1,
 310         .dev = {
 311                 .release                = usb_release,
 312                 .dma_mask               = &udc_dmamask,
 313                 .coherent_dma_mask      = 0xffffffff,
 314         },
 315         .num_resources  = ARRAY_SIZE(udc_resources),
 316         .resource       = udc_resources,
 317 };
 318
 319 #endif
 320
 321 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 322
 323 /* The dmamask must be set for OHCI to work */
 324 static u64 ohci_dmamask = ~(u32)0;
 325
 326 static struct resource ohci_resources[] = {
 327         {
 328                 .start  = OMAP_OHCI_BASE,
 329                 .end    = OMAP_OHCI_BASE + 4096 - 1,
 330                 .flags  = IORESOURCE_MEM,
 331         },
 332         {
 333                 .start  = INT_USB_HHC_1,
 334                 .flags  = IORESOURCE_IRQ,
 335         },
 336 };
 337
 338 static struct platform_device ohci_device = {
 339         .name                   = "ohci",
 340         .id                     = -1,
 341         .dev = {
 342                 .release                = usb_release,
 343                 .dma_mask               = &ohci_dmamask,
 344                 .coherent_dma_mask      = 0xffffffff,
 345         },
 346         .num_resources  = ARRAY_SIZE(ohci_resources),
 347         .resource               = ohci_resources,
 348 };
 349
 350 #endif
 351
 352 #if     defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
 353
 354 static struct resource otg_resources[] = {
 355         /* order is significant! */
 356         {
 357                 .start          = OTG_BASE,
 358                 .end            = OTG_BASE + 0xff,
 359                 .flags          = IORESOURCE_MEM,
 360         }, {
 361                 .start          = IH2_BASE + 8,
 362                 .flags          = IORESOURCE_IRQ,
 363         },
 364 };
 365
 366 static struct platform_device otg_device = {
 367         .name           = "omap_otg",
 368         .id             = -1,
 369         .dev = {
 370                 .release                = usb_release,
 371         },
 372         .num_resources  = ARRAY_SIZE(otg_resources),
 373         .resource       = otg_resources,
 374 };
 375
 376 #endif
 377
 378 /*-------------------------------------------------------------------------*/
 379
 380 #define ULPD_CLOCK_CTRL_REG     __REG16(ULPD_CLOCK_CTRL)
 381 #define ULPD_SOFT_REQ_REG       __REG16(ULPD_SOFT_REQ)
 382
 383
 384 // FIXME correct answer depends on hmc_mode,
 385 // as does any nonzero value for config->otg port number
 386 #ifdef  CONFIG_USB_GADGET_OMAP
 387 #define is_usb0_device(config)  1
 388 #else
 389 #define is_usb0_device(config)  0
 390 #endif
 391
 392 /*-------------------------------------------------------------------------*/
 393
 394 #ifdef  CONFIG_ARCH_OMAP_OTG
 395
 396 void __init
 397 omap_otg_init(struct omap_usb_config *config)
 398 {
 399         u32             syscon = OTG_SYSCON_1_REG & 0xffff;
 400         int             status;
 401         int             alt_pingroup = 0;
 402
 403         /* NOTE:  no bus or clock setup (yet?) */
 404
 405         syscon = OTG_SYSCON_1_REG & 0xffff;
 406         if (!(syscon & OTG_RESET_DONE))
 407                 pr_debug("USB resets not complete?\n");
 408
 409         // OTG_IRQ_EN_REG = 0;
 410
 411         /* pin muxing and transceiver pinouts */
 412         if (config->pins[0] > 2)        /* alt pingroup 2 */
 413                 alt_pingroup = 1;
 414         syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
 415         syscon |= omap_usb1_init(config->pins[1]);
 416         syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
 417         pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
 418         OTG_SYSCON_1_REG = syscon;
 419
 420         syscon = config->hmc_mode;
 421         syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
 422 #ifdef  CONFIG_USB_OTG
 423         if (config->otg)
 424                 syscon |= OTG_EN;
 425 #endif
 426         pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
 427         pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon);
 428         OTG_SYSCON_2_REG = syscon;
 429
 430         printk("USB: hmc %d", config->hmc_mode);
 431         if (alt_pingroup)
 432                 printk(", usb2 alt %d wires", config->pins[2]);
 433         else if (config->pins[0])
 434                 printk(", usb0 %d wires%s", config->pins[0],
 435                         is_usb0_device(config) ? " (dev)" : "");
 436         if (config->pins[1])
 437                 printk(", usb1 %d wires", config->pins[1]);
 438         if (!alt_pingroup && config->pins[2])
 439                 printk(", usb2 %d wires", config->pins[2]);
 440         if (config->otg)
 441                 printk(", Mini-AB on usb%d", config->otg - 1);
 442         printk("\n");
 443
 444         /* leave USB clocks/controllers off until needed */
 445         ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ;
 446         ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN;
 447         ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK;
 448         syscon = OTG_SYSCON_1_REG;
 449         syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 450
 451 #ifdef  CONFIG_USB_GADGET_OMAP
 452         if (config->otg || config->register_dev) {
 453                 syscon &= ~DEV_IDLE_EN;
 454                 udc_device.dev.platform_data = config;
 455                 /* FIXME patch IRQ numbers for omap730 */
 456                 status = platform_device_register(&udc_device);
 457                 if (status)
 458                         pr_debug("can't register UDC device, %d\n", status);
 459         }
 460 #endif
 461
 462 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 463         if (config->otg || config->register_host) {
 464                 syscon &= ~HST_IDLE_EN;
 465                 ohci_device.dev.platform_data = config;
 466                 if (cpu_is_omap730())
 467                         ohci_resources[1].start = INT_730_USB_HHC_1;
 468                 status = platform_device_register(&ohci_device);
 469                 if (status)
 470                         pr_debug("can't register OHCI device, %d\n", status);
 471         }
 472 #endif
 473
 474 #ifdef  CONFIG_USB_OTG
 475         if (config->otg) {
 476                 syscon &= ~OTG_IDLE_EN;
 477                 otg_device.dev.platform_data = config;
 478                 if (cpu_is_omap730())
 479                         otg_resources[1].start = INT_730_USB_OTG;
 480                 status = platform_device_register(&otg_device);
 481                 if (status)
 482                         pr_debug("can't register OTG device, %d\n", status);
 483         }
 484 #endif
 485         pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
 486         OTG_SYSCON_1_REG = syscon;
 487
 488         status = 0;
 489 }
 490
 491 #else
 492 static inline void omap_otg_init(struct omap_usb_config *config) {}
 493 #endif
 494
 495 /*-------------------------------------------------------------------------*/
 496
 497 #ifdef  CONFIG_ARCH_OMAP1510
 498
 499 #define ULPD_DPLL_CTRL_REG      __REG16(ULPD_DPLL_CTRL)
 500 #define DPLL_IOB                (1 << 13)
 501 #define DPLL_PLL_ENABLE         (1 << 4)
 502 #define DPLL_LOCK               (1 << 0)
 503
 504 #define ULPD_APLL_CTRL_REG      __REG16(ULPD_APLL_CTRL)
 505 #define APLL_NDPLL_SWITCH       (1 << 0)
 506
 507
 508 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 509 {
 510         int status;
 511         unsigned int val;
 512
 513         omap_usb0_init(config->pins[0], is_usb0_device(config));
 514         omap_usb1_init(config->pins[1]);
 515         omap_usb2_init(config->pins[2], 0);
 516
 517         val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
 518         val |= (config->hmc_mode << 1);
 519         omap_writel(val, MOD_CONF_CTRL_0);
 520
 521         printk("USB: hmc %d", config->hmc_mode);
 522         if (config->pins[0])
 523                 printk(", usb0 %d wires%s", config->pins[0],
 524                         is_usb0_device(config) ? " (dev)" : "");
 525         if (config->pins[1])
 526                 printk(", usb1 %d wires", config->pins[1]);
 527         if (config->pins[2])
 528                 printk(", usb2 %d wires", config->pins[2]);
 529         printk("\n");
 530
 531         /* use DPLL for 48 MHz function clock */
 532         pr_debug("APLL %04x DPLL %04x REQ %04x\n", ULPD_APLL_CTRL_REG,
 533                         ULPD_DPLL_CTRL_REG, ULPD_SOFT_REQ_REG);
 534         ULPD_APLL_CTRL_REG &= ~APLL_NDPLL_SWITCH;
 535         ULPD_DPLL_CTRL_REG |= DPLL_IOB | DPLL_PLL_ENABLE;
 536         ULPD_SOFT_REQ_REG |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
 537         while (!(ULPD_DPLL_CTRL_REG & DPLL_LOCK))
 538                 cpu_relax();
 539
 540 #ifdef  CONFIG_USB_GADGET_OMAP
 541         if (config->register_dev) {
 542                 udc_device.dev.platform_data = config;
 543                 status = platform_device_register(&udc_device);
 544                 if (status)
 545                         pr_debug("can't register UDC device, %d\n", status);
 546                 /* udc driver gates 48MHz by D+ pullup */
 547         }
 548 #endif
 549
 550 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 551         if (config->register_host) {
 552                 ohci_device.dev.platform_data = config;
 553                 status = platform_device_register(&ohci_device);
 554                 if (status)
 555                         pr_debug("can't register OHCI device, %d\n", status);
 556                 /* hcd explicitly gates 48MHz */
 557         }
 558 #endif
 559 }
 560
 561 #else
 562 static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 563 #endif
 564
 565 /*-------------------------------------------------------------------------*/
 566
 567 static struct omap_usb_config platform_data;
 568
 569 static int __init
 570 omap_usb_init(void)
 571 {
 572         const struct omap_usb_config *config;
 573
 574         config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
 575         if (config == NULL) {
 576                 printk(KERN_ERR "USB: No board-specific "
 577                                 "platform config found\n");
 578                 return -ENODEV;
 579         }
 580         platform_data = *config;
 581
 582         if (cpu_is_omap730() || cpu_is_omap16xx())
 583                 omap_otg_init(&platform_data);
 584         else if (cpu_is_omap15xx())
 585                 omap_1510_usb_init(&platform_data);
 586         else {
 587                 printk(KERN_ERR "USB: No init for your chip yet\n");
 588                 return -ENODEV;
 589         }
 590         return 0;
 591 }
 592
 593 subsys_initcall(omap_usb_init);