Merge branch 'x86/uaccess' into core/percpu
[linux-2.6] / drivers / gpu / drm / via / via_dmablit.c
1 /* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro
2  *
3  * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved.
4  *
5  * Permission is hereby granted, free of charge, to any person obtaining a
6  * copy of this software and associated documentation files (the "Software"),
7  * to deal in the Software without restriction, including without limitation
8  * the rights to use, copy, modify, merge, publish, distribute, sub license,
9  * and/or sell copies of the Software, and to permit persons to whom the
10  * Software is furnished to do so, subject to the following conditions:
11  *
12  * The above copyright notice and this permission notice (including the
13  * next paragraph) shall be included in all copies or substantial portions
14  * of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
19  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
20  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
21  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
22  * USE OR OTHER DEALINGS IN THE SOFTWARE.
23  *
24  * Authors:
25  *    Thomas Hellstrom.
26  *    Partially based on code obtained from Digeo Inc.
27  */
28
29
30 /*
31  * Unmaps the DMA mappings.
32  * FIXME: Is this a NoOp on x86? Also
33  * FIXME: What happens if this one is called and a pending blit has previously done
34  * the same DMA mappings?
35  */
36
37 #include "drmP.h"
38 #include "via_drm.h"
39 #include "via_drv.h"
40 #include "via_dmablit.h"
41
42 #include <linux/pagemap.h>
43
44 #define VIA_PGDN(x)          (((unsigned long)(x)) & PAGE_MASK)
45 #define VIA_PGOFF(x)        (((unsigned long)(x)) & ~PAGE_MASK)
46 #define VIA_PFN(x)            ((unsigned long)(x) >> PAGE_SHIFT)
47
48 typedef struct _drm_via_descriptor {
49         uint32_t mem_addr;
50         uint32_t dev_addr;
51         uint32_t size;
52         uint32_t next;
53 } drm_via_descriptor_t;
54
55
56 /*
57  * Unmap a DMA mapping.
58  */
59
60
61
62 static void
63 via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
64 {
65         int num_desc = vsg->num_desc;
66         unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page;
67         unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page;
68         drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] +
69                 descriptor_this_page;
70         dma_addr_t next = vsg->chain_start;
71
72         while(num_desc--) {
73                 if (descriptor_this_page-- == 0) {
74                         cur_descriptor_page--;
75                         descriptor_this_page = vsg->descriptors_per_page - 1;
76                         desc_ptr = vsg->desc_pages[cur_descriptor_page] +
77                                 descriptor_this_page;
78                 }
79                 dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE);
80                 dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction);
81                 next = (dma_addr_t) desc_ptr->next;
82                 desc_ptr--;
83         }
84 }
85
86 /*
87  * If mode = 0, count how many descriptors are needed.
88  * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors.
89  * Descriptors are run in reverse order by the hardware because we are not allowed to update the
90  * 'next' field without syncing calls when the descriptor is already mapped.
91  */
92
93 static void
94 via_map_blit_for_device(struct pci_dev *pdev,
95                    const drm_via_dmablit_t *xfer,
96                    drm_via_sg_info_t *vsg,
97                    int mode)
98 {
99         unsigned cur_descriptor_page = 0;
100         unsigned num_descriptors_this_page = 0;
101         unsigned char *mem_addr = xfer->mem_addr;
102         unsigned char *cur_mem;
103         unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr);
104         uint32_t fb_addr = xfer->fb_addr;
105         uint32_t cur_fb;
106         unsigned long line_len;
107         unsigned remaining_len;
108         int num_desc = 0;
109         int cur_line;
110         dma_addr_t next = 0 | VIA_DMA_DPR_EC;
111         drm_via_descriptor_t *desc_ptr = NULL;
112
113         if (mode == 1)
114                 desc_ptr = vsg->desc_pages[cur_descriptor_page];
115
116         for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) {
117
118                 line_len = xfer->line_length;
119                 cur_fb = fb_addr;
120                 cur_mem = mem_addr;
121
122                 while (line_len > 0) {
123
124                         remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len);
125                         line_len -= remaining_len;
126
127                         if (mode == 1) {
128                                 desc_ptr->mem_addr =
129                                         dma_map_page(&pdev->dev,
130                                                      vsg->pages[VIA_PFN(cur_mem) -
131                                                                 VIA_PFN(first_addr)],
132                                                      VIA_PGOFF(cur_mem), remaining_len,
133                                                      vsg->direction);
134                                 desc_ptr->dev_addr = cur_fb;
135
136                                 desc_ptr->size = remaining_len;
137                                 desc_ptr->next = (uint32_t) next;
138                                 next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr),
139                                                       DMA_TO_DEVICE);
140                                 desc_ptr++;
141                                 if (++num_descriptors_this_page >= vsg->descriptors_per_page) {
142                                         num_descriptors_this_page = 0;
143                                         desc_ptr = vsg->desc_pages[++cur_descriptor_page];
144                                 }
145                         }
146
147                         num_desc++;
148                         cur_mem += remaining_len;
149                         cur_fb += remaining_len;
150                 }
151
152                 mem_addr += xfer->mem_stride;
153                 fb_addr += xfer->fb_stride;
154         }
155
156         if (mode == 1) {
157                 vsg->chain_start = next;
158                 vsg->state = dr_via_device_mapped;
159         }
160         vsg->num_desc = num_desc;
161 }
162
163 /*
164  * Function that frees up all resources for a blit. It is usable even if the
165  * blit info has only been partially built as long as the status enum is consistent
166  * with the actual status of the used resources.
167  */
168
169
170 static void
171 via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
172 {
173         struct page *page;
174         int i;
175
176         switch(vsg->state) {
177         case dr_via_device_mapped:
178                 via_unmap_blit_from_device(pdev, vsg);
179         case dr_via_desc_pages_alloc:
180                 for (i=0; i<vsg->num_desc_pages; ++i) {
181                         if (vsg->desc_pages[i] != NULL)
182                           free_page((unsigned long)vsg->desc_pages[i]);
183                 }
184                 kfree(vsg->desc_pages);
185         case dr_via_pages_locked:
186                 for (i=0; i<vsg->num_pages; ++i) {
187                         if ( NULL != (page = vsg->pages[i])) {
188                                 if (! PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction))
189                                         SetPageDirty(page);
190                                 page_cache_release(page);
191                         }
192                 }
193         case dr_via_pages_alloc:
194                 vfree(vsg->pages);
195         default:
196                 vsg->state = dr_via_sg_init;
197         }
198         if (vsg->bounce_buffer) {
199                 vfree(vsg->bounce_buffer);
200                 vsg->bounce_buffer = NULL;
201         }
202         vsg->free_on_sequence = 0;
203 }
204
205 /*
206  * Fire a blit engine.
207  */
208
209 static void
210 via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine)
211 {
212         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
213
214         VIA_WRITE(VIA_PCI_DMA_MAR0 + engine*0x10, 0);
215         VIA_WRITE(VIA_PCI_DMA_DAR0 + engine*0x10, 0);
216         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD |
217                   VIA_DMA_CSR_DE);
218         VIA_WRITE(VIA_PCI_DMA_MR0  + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
219         VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0);
220         VIA_WRITE(VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
221         DRM_WRITEMEMORYBARRIER();
222         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
223         VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04);
224 }
225
226 /*
227  * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will
228  * occur here if the calling user does not have access to the submitted address.
229  */
230
231 static int
232 via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
233 {
234         int ret;
235         unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
236         vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride -1)) -
237                 first_pfn + 1;
238
239         if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
240                 return -ENOMEM;
241         memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages);
242         down_read(&current->mm->mmap_sem);
243         ret = get_user_pages(current, current->mm,
244                              (unsigned long)xfer->mem_addr,
245                              vsg->num_pages,
246                              (vsg->direction == DMA_FROM_DEVICE),
247                              0, vsg->pages, NULL);
248
249         up_read(&current->mm->mmap_sem);
250         if (ret != vsg->num_pages) {
251                 if (ret < 0)
252                         return ret;
253                 vsg->state = dr_via_pages_locked;
254                 return -EINVAL;
255         }
256         vsg->state = dr_via_pages_locked;
257         DRM_DEBUG("DMA pages locked\n");
258         return 0;
259 }
260
261 /*
262  * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
263  * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
264  * quite large for some blits, and pages don't need to be contingous.
265  */
266
267 static int
268 via_alloc_desc_pages(drm_via_sg_info_t *vsg)
269 {
270         int i;
271
272         vsg->descriptors_per_page = PAGE_SIZE / sizeof( drm_via_descriptor_t);
273         vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) /
274                 vsg->descriptors_per_page;
275
276         if (NULL ==  (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL)))
277                 return -ENOMEM;
278
279         vsg->state = dr_via_desc_pages_alloc;
280         for (i=0; i<vsg->num_desc_pages; ++i) {
281                 if (NULL == (vsg->desc_pages[i] =
282                              (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
283                         return -ENOMEM;
284         }
285         DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages,
286                   vsg->num_desc);
287         return 0;
288 }
289
290 static void
291 via_abort_dmablit(struct drm_device *dev, int engine)
292 {
293         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
294
295         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA);
296 }
297
298 static void
299 via_dmablit_engine_off(struct drm_device *dev, int engine)
300 {
301         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
302
303         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD);
304 }
305
306
307
308 /*
309  * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here.
310  * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue
311  * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while
312  * the workqueue task takes care of processing associated with the old blit.
313  */
314
315 void
316 via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
317 {
318         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
319         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
320         int cur;
321         int done_transfer;
322         unsigned long irqsave=0;
323         uint32_t status = 0;
324
325         DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
326                   engine, from_irq, (unsigned long) blitq);
327
328         if (from_irq) {
329                 spin_lock(&blitq->blit_lock);
330         } else {
331                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
332         }
333
334         done_transfer = blitq->is_active &&
335           (( status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
336         done_transfer = done_transfer || ( blitq->aborting && !(status & VIA_DMA_CSR_DE));
337
338         cur = blitq->cur;
339         if (done_transfer) {
340
341                 blitq->blits[cur]->aborted = blitq->aborting;
342                 blitq->done_blit_handle++;
343                 DRM_WAKEUP(blitq->blit_queue + cur);
344
345                 cur++;
346                 if (cur >= VIA_NUM_BLIT_SLOTS)
347                         cur = 0;
348                 blitq->cur = cur;
349
350                 /*
351                  * Clear transfer done flag.
352                  */
353
354                 VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04,  VIA_DMA_CSR_TD);
355
356                 blitq->is_active = 0;
357                 blitq->aborting = 0;
358                 schedule_work(&blitq->wq);
359
360         } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) {
361
362                 /*
363                  * Abort transfer after one second.
364                  */
365
366                 via_abort_dmablit(dev, engine);
367                 blitq->aborting = 1;
368                 blitq->end = jiffies + DRM_HZ;
369         }
370
371         if (!blitq->is_active) {
372                 if (blitq->num_outstanding) {
373                         via_fire_dmablit(dev, blitq->blits[cur], engine);
374                         blitq->is_active = 1;
375                         blitq->cur = cur;
376                         blitq->num_outstanding--;
377                         blitq->end = jiffies + DRM_HZ;
378                         if (!timer_pending(&blitq->poll_timer))
379                                 mod_timer(&blitq->poll_timer, jiffies + 1);
380                 } else {
381                         if (timer_pending(&blitq->poll_timer)) {
382                                 del_timer(&blitq->poll_timer);
383                         }
384                         via_dmablit_engine_off(dev, engine);
385                 }
386         }
387
388         if (from_irq) {
389                 spin_unlock(&blitq->blit_lock);
390         } else {
391                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
392         }
393 }
394
395
396
397 /*
398  * Check whether this blit is still active, performing necessary locking.
399  */
400
401 static int
402 via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue)
403 {
404         unsigned long irqsave;
405         uint32_t slot;
406         int active;
407
408         spin_lock_irqsave(&blitq->blit_lock, irqsave);
409
410         /*
411          * Allow for handle wraparounds.
412          */
413
414         active = ((blitq->done_blit_handle - handle) > (1 << 23)) &&
415                 ((blitq->cur_blit_handle - handle) <= (1 << 23));
416
417         if (queue && active) {
418                 slot = handle - blitq->done_blit_handle + blitq->cur -1;
419                 if (slot >= VIA_NUM_BLIT_SLOTS) {
420                         slot -= VIA_NUM_BLIT_SLOTS;
421                 }
422                 *queue = blitq->blit_queue + slot;
423         }
424
425         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
426
427         return active;
428 }
429
430 /*
431  * Sync. Wait for at least three seconds for the blit to be performed.
432  */
433
434 static int
435 via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
436 {
437
438         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
439         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
440         wait_queue_head_t *queue;
441         int ret = 0;
442
443         if (via_dmablit_active(blitq, engine, handle, &queue)) {
444                 DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ,
445                             !via_dmablit_active(blitq, engine, handle, NULL));
446         }
447         DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
448                   handle, engine, ret);
449
450         return ret;
451 }
452
453
454 /*
455  * A timer that regularly polls the blit engine in cases where we don't have interrupts:
456  * a) Broken hardware (typically those that don't have any video capture facility).
457  * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted.
458  * The timer and hardware IRQ's can and do work in parallel. If the hardware has
459  * irqs, it will shorten the latency somewhat.
460  */
461
462
463
464 static void
465 via_dmablit_timer(unsigned long data)
466 {
467         drm_via_blitq_t *blitq = (drm_via_blitq_t *) data;
468         struct drm_device *dev = blitq->dev;
469         int engine = (int)
470                 (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues);
471
472         DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine,
473                   (unsigned long) jiffies);
474
475         via_dmablit_handler(dev, engine, 0);
476
477         if (!timer_pending(&blitq->poll_timer)) {
478                 mod_timer(&blitq->poll_timer, jiffies + 1);
479
480                /*
481                 * Rerun handler to delete timer if engines are off, and
482                 * to shorten abort latency. This is a little nasty.
483                 */
484
485                via_dmablit_handler(dev, engine, 0);
486
487         }
488 }
489
490
491
492
493 /*
494  * Workqueue task that frees data and mappings associated with a blit.
495  * Also wakes up waiting processes. Each of these tasks handles one
496  * blit engine only and may not be called on each interrupt.
497  */
498
499
500 static void
501 via_dmablit_workqueue(struct work_struct *work)
502 {
503         drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq);
504         struct drm_device *dev = blitq->dev;
505         unsigned long irqsave;
506         drm_via_sg_info_t *cur_sg;
507         int cur_released;
508
509
510         DRM_DEBUG("Workqueue task called for blit engine %ld\n",(unsigned long)
511                   (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
512
513         spin_lock_irqsave(&blitq->blit_lock, irqsave);
514
515         while(blitq->serviced != blitq->cur) {
516
517                 cur_released = blitq->serviced++;
518
519                 DRM_DEBUG("Releasing blit slot %d\n", cur_released);
520
521                 if (blitq->serviced >= VIA_NUM_BLIT_SLOTS)
522                         blitq->serviced = 0;
523
524                 cur_sg = blitq->blits[cur_released];
525                 blitq->num_free++;
526
527                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
528
529                 DRM_WAKEUP(&blitq->busy_queue);
530
531                 via_free_sg_info(dev->pdev, cur_sg);
532                 kfree(cur_sg);
533
534                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
535         }
536
537         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
538 }
539
540
541 /*
542  * Init all blit engines. Currently we use two, but some hardware have 4.
543  */
544
545
546 void
547 via_init_dmablit(struct drm_device *dev)
548 {
549         int i,j;
550         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
551         drm_via_blitq_t *blitq;
552
553         pci_set_master(dev->pdev);
554
555         for (i=0; i< VIA_NUM_BLIT_ENGINES; ++i) {
556                 blitq = dev_priv->blit_queues + i;
557                 blitq->dev = dev;
558                 blitq->cur_blit_handle = 0;
559                 blitq->done_blit_handle = 0;
560                 blitq->head = 0;
561                 blitq->cur = 0;
562                 blitq->serviced = 0;
563                 blitq->num_free = VIA_NUM_BLIT_SLOTS - 1;
564                 blitq->num_outstanding = 0;
565                 blitq->is_active = 0;
566                 blitq->aborting = 0;
567                 spin_lock_init(&blitq->blit_lock);
568                 for (j=0; j<VIA_NUM_BLIT_SLOTS; ++j) {
569                         DRM_INIT_WAITQUEUE(blitq->blit_queue + j);
570                 }
571                 DRM_INIT_WAITQUEUE(&blitq->busy_queue);
572                 INIT_WORK(&blitq->wq, via_dmablit_workqueue);
573                 setup_timer(&blitq->poll_timer, via_dmablit_timer,
574                                 (unsigned long)blitq);
575         }
576 }
577
578 /*
579  * Build all info and do all mappings required for a blit.
580  */
581
582
583 static int
584 via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
585 {
586         int draw = xfer->to_fb;
587         int ret = 0;
588
589         vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
590         vsg->bounce_buffer = NULL;
591
592         vsg->state = dr_via_sg_init;
593
594         if (xfer->num_lines <= 0 || xfer->line_length <= 0) {
595                 DRM_ERROR("Zero size bitblt.\n");
596                 return -EINVAL;
597         }
598
599         /*
600          * Below check is a driver limitation, not a hardware one. We
601          * don't want to lock unused pages, and don't want to incoporate the
602          * extra logic of avoiding them. Make sure there are no.
603          * (Not a big limitation anyway.)
604          */
605
606         if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) {
607                 DRM_ERROR("Too large system memory stride. Stride: %d, "
608                           "Length: %d\n", xfer->mem_stride, xfer->line_length);
609                 return -EINVAL;
610         }
611
612         if ((xfer->mem_stride == xfer->line_length) &&
613            (xfer->fb_stride == xfer->line_length)) {
614                 xfer->mem_stride *= xfer->num_lines;
615                 xfer->line_length = xfer->mem_stride;
616                 xfer->fb_stride = xfer->mem_stride;
617                 xfer->num_lines = 1;
618         }
619
620         /*
621          * Don't lock an arbitrary large number of pages, since that causes a
622          * DOS security hole.
623          */
624
625         if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) {
626                 DRM_ERROR("Too large PCI DMA bitblt.\n");
627                 return -EINVAL;
628         }
629
630         /*
631          * we allow a negative fb stride to allow flipping of images in
632          * transfer.
633          */
634
635         if (xfer->mem_stride < xfer->line_length ||
636                 abs(xfer->fb_stride) < xfer->line_length) {
637                 DRM_ERROR("Invalid frame-buffer / memory stride.\n");
638                 return -EINVAL;
639         }
640
641         /*
642          * A hardware bug seems to be worked around if system memory addresses start on
643          * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted
644          * about this. Meanwhile, impose the following restrictions:
645          */
646
647 #ifdef VIA_BUGFREE
648         if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) ||
649             ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) {
650                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
651                 return -EINVAL;
652         }
653 #else
654         if ((((unsigned long)xfer->mem_addr & 15) ||
655               ((unsigned long)xfer->fb_addr & 3)) ||
656            ((xfer->num_lines > 1) &&
657            ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) {
658                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
659                 return -EINVAL;
660         }
661 #endif
662
663         if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) {
664                 DRM_ERROR("Could not lock DMA pages.\n");
665                 via_free_sg_info(dev->pdev, vsg);
666                 return ret;
667         }
668
669         via_map_blit_for_device(dev->pdev, xfer, vsg, 0);
670         if (0 != (ret = via_alloc_desc_pages(vsg))) {
671                 DRM_ERROR("Could not allocate DMA descriptor pages.\n");
672                 via_free_sg_info(dev->pdev, vsg);
673                 return ret;
674         }
675         via_map_blit_for_device(dev->pdev, xfer, vsg, 1);
676
677         return 0;
678 }
679
680
681 /*
682  * Reserve one free slot in the blit queue. Will wait for one second for one
683  * to become available. Otherwise -EBUSY is returned.
684  */
685
686 static int
687 via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
688 {
689         int ret=0;
690         unsigned long irqsave;
691
692         DRM_DEBUG("Num free is %d\n", blitq->num_free);
693         spin_lock_irqsave(&blitq->blit_lock, irqsave);
694         while(blitq->num_free == 0) {
695                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
696
697                 DRM_WAIT_ON(ret, blitq->busy_queue, DRM_HZ, blitq->num_free > 0);
698                 if (ret) {
699                         return (-EINTR == ret) ? -EAGAIN : ret;
700                 }
701
702                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
703         }
704
705         blitq->num_free--;
706         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
707
708         return 0;
709 }
710
711 /*
712  * Hand back a free slot if we changed our mind.
713  */
714
715 static void
716 via_dmablit_release_slot(drm_via_blitq_t *blitq)
717 {
718         unsigned long irqsave;
719
720         spin_lock_irqsave(&blitq->blit_lock, irqsave);
721         blitq->num_free++;
722         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
723         DRM_WAKEUP( &blitq->busy_queue );
724 }
725
726 /*
727  * Grab a free slot. Build blit info and queue a blit.
728  */
729
730
731 static int
732 via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
733 {
734         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
735         drm_via_sg_info_t *vsg;
736         drm_via_blitq_t *blitq;
737         int ret;
738         int engine;
739         unsigned long irqsave;
740
741         if (dev_priv == NULL) {
742                 DRM_ERROR("Called without initialization.\n");
743                 return -EINVAL;
744         }
745
746         engine = (xfer->to_fb) ? 0 : 1;
747         blitq = dev_priv->blit_queues + engine;
748         if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) {
749                 return ret;
750         }
751         if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
752                 via_dmablit_release_slot(blitq);
753                 return -ENOMEM;
754         }
755         if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) {
756                 via_dmablit_release_slot(blitq);
757                 kfree(vsg);
758                 return ret;
759         }
760         spin_lock_irqsave(&blitq->blit_lock, irqsave);
761
762         blitq->blits[blitq->head++] = vsg;
763         if (blitq->head >= VIA_NUM_BLIT_SLOTS)
764                 blitq->head = 0;
765         blitq->num_outstanding++;
766         xfer->sync.sync_handle = ++blitq->cur_blit_handle;
767
768         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
769         xfer->sync.engine = engine;
770
771         via_dmablit_handler(dev, engine, 0);
772
773         return 0;
774 }
775
776 /*
777  * Sync on a previously submitted blit. Note that the X server use signals extensively, and
778  * that there is a very big probability that this IOCTL will be interrupted by a signal. In that
779  * case it returns with -EAGAIN for the signal to be delivered.
780  * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock().
781  */
782
783 int
784 via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_priv )
785 {
786         drm_via_blitsync_t *sync = data;
787         int err;
788
789         if (sync->engine >= VIA_NUM_BLIT_ENGINES)
790                 return -EINVAL;
791
792         err = via_dmablit_sync(dev, sync->sync_handle, sync->engine);
793
794         if (-EINTR == err)
795                 err = -EAGAIN;
796
797         return err;
798 }
799
800
801 /*
802  * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal
803  * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should
804  * be reissued. See the above IOCTL code.
805  */
806
807 int
808 via_dma_blit( struct drm_device *dev, void *data, struct drm_file *file_priv )
809 {
810         drm_via_dmablit_t *xfer = data;
811         int err;
812
813         err = via_dmablit(dev, xfer);
814
815         return err;
816 }