Merge branch 'linus' into x86/memtest
[linux-2.6] / include / asm-ia64 / uaccess.h
1 #ifndef _ASM_IA64_UACCESS_H
2 #define _ASM_IA64_UACCESS_H
3
4 /*
5  * This file defines various macros to transfer memory areas across
6  * the user/kernel boundary.  This needs to be done carefully because
7  * this code is executed in kernel mode and uses user-specified
8  * addresses.  Thus, we need to be careful not to let the user to
9  * trick us into accessing kernel memory that would normally be
10  * inaccessible.  This code is also fairly performance sensitive,
11  * so we want to spend as little time doing safety checks as
12  * possible.
13  *
14  * To make matters a bit more interesting, these macros sometimes also
15  * called from within the kernel itself, in which case the address
16  * validity check must be skipped.  The get_fs() macro tells us what
17  * to do: if get_fs()==USER_DS, checking is performed, if
18  * get_fs()==KERNEL_DS, checking is bypassed.
19  *
20  * Note that even if the memory area specified by the user is in a
21  * valid address range, it is still possible that we'll get a page
22  * fault while accessing it.  This is handled by filling out an
23  * exception handler fixup entry for each instruction that has the
24  * potential to fault.  When such a fault occurs, the page fault
25  * handler checks to see whether the faulting instruction has a fixup
26  * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
27  * then resumes execution at the continuation point.
28  *
29  * Based on <asm-alpha/uaccess.h>.
30  *
31  * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
32  *      David Mosberger-Tang <davidm@hpl.hp.com>
33  */
34
35 #include <linux/compiler.h>
36 #include <linux/errno.h>
37 #include <linux/sched.h>
38 #include <linux/page-flags.h>
39 #include <linux/mm.h>
40
41 #include <asm/intrinsics.h>
42 #include <asm/pgtable.h>
43 #include <asm/io.h>
44
45 /*
46  * For historical reasons, the following macros are grossly misnamed:
47  */
48 #define KERNEL_DS       ((mm_segment_t) { ~0UL })               /* cf. access_ok() */
49 #define USER_DS         ((mm_segment_t) { TASK_SIZE-1 })        /* cf. access_ok() */
50
51 #define VERIFY_READ     0
52 #define VERIFY_WRITE    1
53
54 #define get_ds()  (KERNEL_DS)
55 #define get_fs()  (current_thread_info()->addr_limit)
56 #define set_fs(x) (current_thread_info()->addr_limit = (x))
57
58 #define segment_eq(a, b)        ((a).seg == (b).seg)
59
60 /*
61  * When accessing user memory, we need to make sure the entire area really is in
62  * user-level space.  In order to do this efficiently, we make sure that the page at
63  * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
64  * point inside the virtually mapped linear page table.
65  */
66 #define __access_ok(addr, size, segment)                                                \
67 ({                                                                                      \
68         __chk_user_ptr(addr);                                                           \
69         (likely((unsigned long) (addr) <= (segment).seg)                                \
70          && ((segment).seg == KERNEL_DS.seg                                             \
71              || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT)));        \
72 })
73 #define access_ok(type, addr, size)     __access_ok((addr), (size), get_fs())
74
75 /*
76  * These are the main single-value transfer routines.  They automatically
77  * use the right size if we just have the right pointer type.
78  *
79  * Careful to not
80  * (a) re-use the arguments for side effects (sizeof/typeof is ok)
81  * (b) require any knowledge of processes at this stage
82  */
83 #define put_user(x, ptr)        __put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
84 #define get_user(x, ptr)        __get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
85
86 /*
87  * The "__xxx" versions do not do address space checking, useful when
88  * doing multiple accesses to the same area (the programmer has to do the
89  * checks by hand with "access_ok()")
90  */
91 #define __put_user(x, ptr)      __put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
92 #define __get_user(x, ptr)      __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
93
94 extern long __put_user_unaligned_unknown (void);
95
96 #define __put_user_unaligned(x, ptr)                                                            \
97 ({                                                                                              \
98         long __ret;                                                                             \
99         switch (sizeof(*(ptr))) {                                                               \
100                 case 1: __ret = __put_user((x), (ptr)); break;                                  \
101                 case 2: __ret = (__put_user((x), (u8 __user *)(ptr)))                           \
102                         | (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;              \
103                 case 4: __ret = (__put_user((x), (u16 __user *)(ptr)))                          \
104                         | (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;            \
105                 case 8: __ret = (__put_user((x), (u32 __user *)(ptr)))                          \
106                         | (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;            \
107                 default: __ret = __put_user_unaligned_unknown();                                \
108         }                                                                                       \
109         __ret;                                                                                  \
110 })
111
112 extern long __get_user_unaligned_unknown (void);
113
114 #define __get_user_unaligned(x, ptr)                                                            \
115 ({                                                                                              \
116         long __ret;                                                                             \
117         switch (sizeof(*(ptr))) {                                                               \
118                 case 1: __ret = __get_user((x), (ptr)); break;                                  \
119                 case 2: __ret = (__get_user((x), (u8 __user *)(ptr)))                           \
120                         | (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;              \
121                 case 4: __ret = (__get_user((x), (u16 __user *)(ptr)))                          \
122                         | (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;            \
123                 case 8: __ret = (__get_user((x), (u32 __user *)(ptr)))                          \
124                         | (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;            \
125                 default: __ret = __get_user_unaligned_unknown();                                \
126         }                                                                                       \
127         __ret;                                                                                  \
128 })
129
130 #ifdef ASM_SUPPORTED
131   struct __large_struct { unsigned long buf[100]; };
132 # define __m(x) (*(struct __large_struct __user *)(x))
133
134 /* We need to declare the __ex_table section before we can use it in .xdata.  */
135 asm (".section \"__ex_table\", \"a\"\n\t.previous");
136
137 # define __get_user_size(val, addr, n, err)                                                     \
138 do {                                                                                            \
139         register long __gu_r8 asm ("r8") = 0;                                                   \
140         register long __gu_r9 asm ("r9");                                                       \
141         asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n"     \
142              "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n"                                         \
143              "[1:]"                                                                             \
144              : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8));                    \
145         (err) = __gu_r8;                                                                        \
146         (val) = __gu_r9;                                                                        \
147 } while (0)
148
149 /*
150  * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it.  This
151  * is because they do not write to any memory gcc knows about, so there are no aliasing
152  * issues.
153  */
154 # define __put_user_size(val, addr, n, err)                                                     \
155 do {                                                                                            \
156         register long __pu_r8 asm ("r8") = 0;                                                   \
157         asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n" \
158                       "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n"                                  \
159                       "[1:]"                                                                    \
160                       : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8));               \
161         (err) = __pu_r8;                                                                        \
162 } while (0)
163
164 #else /* !ASM_SUPPORTED */
165 # define RELOC_TYPE     2       /* ip-rel */
166 # define __get_user_size(val, addr, n, err)                             \
167 do {                                                                    \
168         __ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE);   \
169         (err) = ia64_getreg(_IA64_REG_R8);                              \
170         (val) = ia64_getreg(_IA64_REG_R9);                              \
171 } while (0)
172 # define __put_user_size(val, addr, n, err)                                                     \
173 do {                                                                                            \
174         __st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val));    \
175         (err) = ia64_getreg(_IA64_REG_R8);                                                      \
176 } while (0)
177 #endif /* !ASM_SUPPORTED */
178
179 extern void __get_user_unknown (void);
180
181 /*
182  * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
183  * could clobber r8 and r9 (among others).  Thus, be careful not to evaluate it while
184  * using r8/r9.
185  */
186 #define __do_get_user(check, x, ptr, size, segment)                                     \
187 ({                                                                                      \
188         const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);                              \
189         __typeof__ (size) __gu_size = (size);                                           \
190         long __gu_err = -EFAULT;                                                        \
191         unsigned long __gu_val = 0;                                                     \
192         if (!check || __access_ok(__gu_ptr, size, segment))                             \
193                 switch (__gu_size) {                                                    \
194                       case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break;  \
195                       case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break;  \
196                       case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break;  \
197                       case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break;  \
198                       default: __get_user_unknown(); break;                             \
199                 }                                                                       \
200         (x) = (__typeof__(*(__gu_ptr))) __gu_val;                                       \
201         __gu_err;                                                                       \
202 })
203
204 #define __get_user_nocheck(x, ptr, size)        __do_get_user(0, x, ptr, size, KERNEL_DS)
205 #define __get_user_check(x, ptr, size, segment) __do_get_user(1, x, ptr, size, segment)
206
207 extern void __put_user_unknown (void);
208
209 /*
210  * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
211  * could clobber r8 (among others).  Thus, be careful not to evaluate them while using r8.
212  */
213 #define __do_put_user(check, x, ptr, size, segment)                                     \
214 ({                                                                                      \
215         __typeof__ (x) __pu_x = (x);                                                    \
216         __typeof__ (*(ptr)) __user *__pu_ptr = (ptr);                                   \
217         __typeof__ (size) __pu_size = (size);                                           \
218         long __pu_err = -EFAULT;                                                        \
219                                                                                         \
220         if (!check || __access_ok(__pu_ptr, __pu_size, segment))                        \
221                 switch (__pu_size) {                                                    \
222                       case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break;    \
223                       case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break;    \
224                       case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break;    \
225                       case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break;    \
226                       default: __put_user_unknown(); break;                             \
227                 }                                                                       \
228         __pu_err;                                                                       \
229 })
230
231 #define __put_user_nocheck(x, ptr, size)        __do_put_user(0, x, ptr, size, KERNEL_DS)
232 #define __put_user_check(x, ptr, size, segment) __do_put_user(1, x, ptr, size, segment)
233
234 /*
235  * Complex access routines
236  */
237 extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
238                                                unsigned long count);
239
240 static inline unsigned long
241 __copy_to_user (void __user *to, const void *from, unsigned long count)
242 {
243         return __copy_user(to, (__force void __user *) from, count);
244 }
245
246 static inline unsigned long
247 __copy_from_user (void *to, const void __user *from, unsigned long count)
248 {
249         return __copy_user((__force void __user *) to, from, count);
250 }
251
252 #define __copy_to_user_inatomic         __copy_to_user
253 #define __copy_from_user_inatomic       __copy_from_user
254 #define copy_to_user(to, from, n)                                                       \
255 ({                                                                                      \
256         void __user *__cu_to = (to);                                                    \
257         const void *__cu_from = (from);                                                 \
258         long __cu_len = (n);                                                            \
259                                                                                         \
260         if (__access_ok(__cu_to, __cu_len, get_fs()))                                   \
261                 __cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len);   \
262         __cu_len;                                                                       \
263 })
264
265 #define copy_from_user(to, from, n)                                                     \
266 ({                                                                                      \
267         void *__cu_to = (to);                                                           \
268         const void __user *__cu_from = (from);                                          \
269         long __cu_len = (n);                                                            \
270                                                                                         \
271         __chk_user_ptr(__cu_from);                                                      \
272         if (__access_ok(__cu_from, __cu_len, get_fs()))                                 \
273                 __cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);   \
274         __cu_len;                                                                       \
275 })
276
277 #define __copy_in_user(to, from, size)  __copy_user((to), (from), (size))
278
279 static inline unsigned long
280 copy_in_user (void __user *to, const void __user *from, unsigned long n)
281 {
282         if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
283                 n = __copy_user(to, from, n);
284         return n;
285 }
286
287 extern unsigned long __do_clear_user (void __user *, unsigned long);
288
289 #define __clear_user(to, n)             __do_clear_user(to, n)
290
291 #define clear_user(to, n)                                       \
292 ({                                                              \
293         unsigned long __cu_len = (n);                           \
294         if (__access_ok(to, __cu_len, get_fs()))                \
295                 __cu_len = __do_clear_user(to, __cu_len);       \
296         __cu_len;                                               \
297 })
298
299
300 /*
301  * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
302  * strlen.
303  */
304 extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
305
306 #define strncpy_from_user(to, from, n)                                  \
307 ({                                                                      \
308         const char __user * __sfu_from = (from);                        \
309         long __sfu_ret = -EFAULT;                                       \
310         if (__access_ok(__sfu_from, 0, get_fs()))                       \
311                 __sfu_ret = __strncpy_from_user((to), __sfu_from, (n)); \
312         __sfu_ret;                                                      \
313 })
314
315 /* Returns: 0 if bad, string length+1 (memory size) of string if ok */
316 extern unsigned long __strlen_user (const char __user *);
317
318 #define strlen_user(str)                                \
319 ({                                                      \
320         const char __user *__su_str = (str);            \
321         unsigned long __su_ret = 0;                     \
322         if (__access_ok(__su_str, 0, get_fs()))         \
323                 __su_ret = __strlen_user(__su_str);     \
324         __su_ret;                                       \
325 })
326
327 /*
328  * Returns: 0 if exception before NUL or reaching the supplied limit
329  * (N), a value greater than N if the limit would be exceeded, else
330  * strlen.
331  */
332 extern unsigned long __strnlen_user (const char __user *, long);
333
334 #define strnlen_user(str, len)                                  \
335 ({                                                              \
336         const char __user *__su_str = (str);                    \
337         unsigned long __su_ret = 0;                             \
338         if (__access_ok(__su_str, 0, get_fs()))                 \
339                 __su_ret = __strnlen_user(__su_str, len);       \
340         __su_ret;                                               \
341 })
342
343 /* Generic code can't deal with the location-relative format that we use for compactness.  */
344 #define ARCH_HAS_SORT_EXTABLE
345 #define ARCH_HAS_SEARCH_EXTABLE
346
347 struct exception_table_entry {
348         int addr;       /* location-relative address of insn this fixup is for */
349         int cont;       /* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
350 };
351
352 extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
353 extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
354
355 static inline int
356 ia64_done_with_exception (struct pt_regs *regs)
357 {
358         const struct exception_table_entry *e;
359         e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri);
360         if (e) {
361                 ia64_handle_exception(regs, e);
362                 return 1;
363         }
364         return 0;
365 }
366
367 #define ARCH_HAS_TRANSLATE_MEM_PTR      1
368 static __inline__ char *
369 xlate_dev_mem_ptr (unsigned long p)
370 {
371         struct page *page;
372         char * ptr;
373
374         page = pfn_to_page(p >> PAGE_SHIFT);
375         if (PageUncached(page))
376                 ptr = (char *)p + __IA64_UNCACHED_OFFSET;
377         else
378                 ptr = __va(p);
379
380         return ptr;
381 }
382
383 /*
384  * Convert a virtual cached kernel memory pointer to an uncached pointer
385  */
386 static __inline__ char *
387 xlate_dev_kmem_ptr (char * p)
388 {
389         struct page *page;
390         char * ptr;
391
392         page = virt_to_page((unsigned long)p);
393         if (PageUncached(page))
394                 ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
395         else
396                 ptr = p;
397
398         return ptr;
399 }
400
401 #endif /* _ASM_IA64_UACCESS_H */