2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
36 #include <linux/kernel.h>
37 #include <linux/mii.h>
38 #include <linux/module.h>
39 #include <linux/netdevice.h>
40 #include <linux/device.h>
41 #include <linux/pci.h>
42 #include <linux/skbuff.h>
43 #include <linux/slab.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <asm/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
53 #include "spider_net.h"
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION);
61 static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
62 static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
64 module_param(rx_descriptors, int, 0444);
65 module_param(tx_descriptors, int, 0444);
67 MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
69 MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
72 char spider_net_driver_name[] = "spidernet";
74 static struct pci_device_id spider_net_pci_tbl[] = {
75 { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
76 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
80 MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
83 * spider_net_read_reg - reads an SMMIO register of a card
84 * @card: device structure
85 * @reg: register to read from
87 * returns the content of the specified SMMIO register.
90 spider_net_read_reg(struct spider_net_card *card, u32 reg)
92 /* We use the powerpc specific variants instead of readl_be() because
93 * we know spidernet is not a real PCI device and we can thus avoid the
94 * performance hit caused by the PCI workarounds.
96 return in_be32(card->regs + reg);
100 * spider_net_write_reg - writes to an SMMIO register of a card
101 * @card: device structure
102 * @reg: register to write to
103 * @value: value to write into the specified SMMIO register
106 spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
108 /* We use the powerpc specific variants instead of writel_be() because
109 * we know spidernet is not a real PCI device and we can thus avoid the
110 * performance hit caused by the PCI workarounds.
112 out_be32(card->regs + reg, value);
115 /** spider_net_write_phy - write to phy register
116 * @netdev: adapter to be written to
119 * @val: value to be written to phy register
121 * spider_net_write_phy_register writes to an arbitrary PHY
122 * register via the spider GPCWOPCMD register. We assume the queue does
123 * not run full (not more than 15 commands outstanding).
126 spider_net_write_phy(struct net_device *netdev, int mii_id,
129 struct spider_net_card *card = netdev_priv(netdev);
132 writevalue = ((u32)mii_id << 21) |
133 ((u32)reg << 16) | ((u32)val);
135 spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
138 /** spider_net_read_phy - read from phy register
139 * @netdev: network device to be read from
143 * Returns value read from PHY register
145 * spider_net_write_phy reads from an arbitrary PHY
146 * register via the spider GPCROPCMD register
149 spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
151 struct spider_net_card *card = netdev_priv(netdev);
154 readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
155 spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
157 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
158 * interrupt, as we poll for the completion of the read operation
159 * in spider_net_read_phy. Should take about 50 us */
161 readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
162 } while (readvalue & SPIDER_NET_GPREXEC);
164 readvalue &= SPIDER_NET_GPRDAT_MASK;
170 * spider_net_setup_aneg - initial auto-negotiation setup
171 * @card: device structure
174 spider_net_setup_aneg(struct spider_net_card *card)
176 struct mii_phy *phy = &card->phy;
178 u16 bmcr, bmsr, stat1000, estat;
180 bmcr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMCR);
181 bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
182 stat1000 = spider_net_read_phy(card->netdev, phy->mii_id, MII_STAT1000);
183 estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
185 if (bmsr & BMSR_10HALF)
186 advertise |= ADVERTISED_10baseT_Half;
187 if (bmsr & BMSR_10FULL)
188 advertise |= ADVERTISED_10baseT_Full;
189 if (bmsr & BMSR_100HALF)
190 advertise |= ADVERTISED_100baseT_Half;
191 if (bmsr & BMSR_100FULL)
192 advertise |= ADVERTISED_100baseT_Full;
194 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL))
195 advertise |= SUPPORTED_1000baseT_Full;
196 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
197 advertise |= SUPPORTED_1000baseT_Half;
199 mii_phy_probe(phy, phy->mii_id);
200 phy->def->ops->setup_aneg(phy, advertise);
205 * spider_net_rx_irq_off - switch off rx irq on this spider card
206 * @card: device structure
208 * switches off rx irq by masking them out in the GHIINTnMSK register
211 spider_net_rx_irq_off(struct spider_net_card *card)
215 regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
216 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
220 * spider_net_rx_irq_on - switch on rx irq on this spider card
221 * @card: device structure
223 * switches on rx irq by enabling them in the GHIINTnMSK register
226 spider_net_rx_irq_on(struct spider_net_card *card)
230 regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
231 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
235 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
236 * @card: card structure
238 * spider_net_set_promisc sets the unicast destination address filter and
239 * thus either allows for non-promisc mode or promisc mode
242 spider_net_set_promisc(struct spider_net_card *card)
245 struct net_device *netdev = card->netdev;
247 if (netdev->flags & IFF_PROMISC) {
248 /* clear destination entry 0 */
249 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
250 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
251 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
252 SPIDER_NET_PROMISC_VALUE);
254 macu = netdev->dev_addr[0];
256 macu |= netdev->dev_addr[1];
257 memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
259 macu |= SPIDER_NET_UA_DESCR_VALUE;
260 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
261 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
262 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
263 SPIDER_NET_NONPROMISC_VALUE);
268 * spider_net_get_mac_address - read mac address from spider card
269 * @card: device structure
271 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
274 spider_net_get_mac_address(struct net_device *netdev)
276 struct spider_net_card *card = netdev_priv(netdev);
279 macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL);
280 macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU);
282 netdev->dev_addr[0] = (macu >> 24) & 0xff;
283 netdev->dev_addr[1] = (macu >> 16) & 0xff;
284 netdev->dev_addr[2] = (macu >> 8) & 0xff;
285 netdev->dev_addr[3] = macu & 0xff;
286 netdev->dev_addr[4] = (macl >> 8) & 0xff;
287 netdev->dev_addr[5] = macl & 0xff;
289 if (!is_valid_ether_addr(&netdev->dev_addr[0]))
296 * spider_net_get_descr_status -- returns the status of a descriptor
297 * @descr: descriptor to look at
299 * returns the status as in the dmac_cmd_status field of the descriptor
302 spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr)
304 return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
308 * spider_net_free_chain - free descriptor chain
309 * @card: card structure
310 * @chain: address of chain
314 spider_net_free_chain(struct spider_net_card *card,
315 struct spider_net_descr_chain *chain)
317 struct spider_net_descr *descr;
322 descr->hwdescr->next_descr_addr = 0;
324 } while (descr != chain->ring);
326 dma_free_coherent(&card->pdev->dev, chain->num_desc,
327 chain->hwring, chain->dma_addr);
331 * spider_net_init_chain - alloc and link descriptor chain
332 * @card: card structure
333 * @chain: address of chain
335 * We manage a circular list that mirrors the hardware structure,
336 * except that the hardware uses bus addresses.
338 * Returns 0 on success, <0 on failure
341 spider_net_init_chain(struct spider_net_card *card,
342 struct spider_net_descr_chain *chain)
345 struct spider_net_descr *descr;
346 struct spider_net_hw_descr *hwdescr;
350 alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr);
352 chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
353 &chain->dma_addr, GFP_KERNEL);
358 memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr));
360 /* Set up the hardware pointers in each descriptor */
362 hwdescr = chain->hwring;
363 buf = chain->dma_addr;
364 for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) {
365 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
366 hwdescr->next_descr_addr = 0;
368 descr->hwdescr = hwdescr;
369 descr->bus_addr = buf;
370 descr->next = descr + 1;
371 descr->prev = descr - 1;
373 buf += sizeof(struct spider_net_hw_descr);
375 /* do actual circular list */
376 (descr-1)->next = chain->ring;
377 chain->ring->prev = descr-1;
379 spin_lock_init(&chain->lock);
380 chain->head = chain->ring;
381 chain->tail = chain->ring;
386 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
387 * @card: card structure
389 * returns 0 on success, <0 on failure
392 spider_net_free_rx_chain_contents(struct spider_net_card *card)
394 struct spider_net_descr *descr;
396 descr = card->rx_chain.head;
399 pci_unmap_single(card->pdev, descr->hwdescr->buf_addr,
400 SPIDER_NET_MAX_FRAME,
401 PCI_DMA_BIDIRECTIONAL);
402 dev_kfree_skb(descr->skb);
406 } while (descr != card->rx_chain.head);
410 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
411 * @card: card structure
412 * @descr: descriptor to re-init
414 * Return 0 on succes, <0 on failure.
416 * Allocates a new rx skb, iommu-maps it and attaches it to the
417 * descriptor. Mark the descriptor as activated, ready-to-use.
420 spider_net_prepare_rx_descr(struct spider_net_card *card,
421 struct spider_net_descr *descr)
423 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
428 /* we need to round up the buffer size to a multiple of 128 */
429 bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
430 (~(SPIDER_NET_RXBUF_ALIGN - 1));
432 /* and we need to have it 128 byte aligned, therefore we allocate a
434 /* allocate an skb */
435 descr->skb = dev_alloc_skb(bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
437 if (netif_msg_rx_err(card) && net_ratelimit())
438 pr_err("Not enough memory to allocate rx buffer\n");
439 card->spider_stats.alloc_rx_skb_error++;
442 hwdescr->buf_size = bufsize;
443 hwdescr->result_size = 0;
444 hwdescr->valid_size = 0;
445 hwdescr->data_status = 0;
446 hwdescr->data_error = 0;
448 offset = ((unsigned long)descr->skb->data) &
449 (SPIDER_NET_RXBUF_ALIGN - 1);
451 skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
452 /* iommu-map the skb */
453 buf = pci_map_single(card->pdev, descr->skb->data,
454 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
455 if (pci_dma_mapping_error(buf)) {
456 dev_kfree_skb_any(descr->skb);
458 if (netif_msg_rx_err(card) && net_ratelimit())
459 pr_err("Could not iommu-map rx buffer\n");
460 card->spider_stats.rx_iommu_map_error++;
461 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
463 hwdescr->buf_addr = buf;
464 hwdescr->next_descr_addr = 0;
466 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
467 SPIDER_NET_DMAC_NOINTR_COMPLETE;
470 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
477 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
478 * @card: card structure
480 * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
481 * chip by writing to the appropriate register. DMA is enabled in
482 * spider_net_enable_rxdmac.
485 spider_net_enable_rxchtails(struct spider_net_card *card)
487 /* assume chain is aligned correctly */
488 spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
489 card->rx_chain.tail->bus_addr);
493 * spider_net_enable_rxdmac - enables a receive DMA controller
494 * @card: card structure
496 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
497 * in the GDADMACCNTR register
500 spider_net_enable_rxdmac(struct spider_net_card *card)
503 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
504 SPIDER_NET_DMA_RX_VALUE);
508 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
509 * @card: card structure
511 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
514 spider_net_refill_rx_chain(struct spider_net_card *card)
516 struct spider_net_descr_chain *chain = &card->rx_chain;
519 /* one context doing the refill (and a second context seeing that
520 * and omitting it) is ok. If called by NAPI, we'll be called again
521 * as spider_net_decode_one_descr is called several times. If some
522 * interrupt calls us, the NAPI is about to clean up anyway. */
523 if (!spin_trylock_irqsave(&chain->lock, flags))
526 while (spider_net_get_descr_status(chain->head->hwdescr) ==
527 SPIDER_NET_DESCR_NOT_IN_USE) {
528 if (spider_net_prepare_rx_descr(card, chain->head))
530 chain->head = chain->head->next;
533 spin_unlock_irqrestore(&chain->lock, flags);
537 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
538 * @card: card structure
540 * Returns 0 on success, <0 on failure.
543 spider_net_alloc_rx_skbs(struct spider_net_card *card)
546 struct spider_net_descr_chain *chain;
550 chain = &card->rx_chain;
551 /* Put at least one buffer into the chain. if this fails,
552 * we've got a problem. If not, spider_net_refill_rx_chain
553 * will do the rest at the end of this function. */
554 if (spider_net_prepare_rx_descr(card, chain->head))
557 chain->head = chain->head->next;
559 /* This will allocate the rest of the rx buffers;
560 * if not, it's business as usual later on. */
561 spider_net_refill_rx_chain(card);
562 spider_net_enable_rxdmac(card);
566 spider_net_free_rx_chain_contents(card);
571 * spider_net_get_multicast_hash - generates hash for multicast filter table
572 * @addr: multicast address
574 * returns the hash value.
576 * spider_net_get_multicast_hash calculates a hash value for a given multicast
577 * address, that is used to set the multicast filter tables
580 spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
584 char addr_for_crc[ETH_ALEN] = { 0, };
587 for (i = 0; i < ETH_ALEN * 8; i++) {
588 bit = (addr[i / 8] >> (i % 8)) & 1;
589 addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
592 crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
603 * spider_net_set_multi - sets multicast addresses and promisc flags
604 * @netdev: interface device structure
606 * spider_net_set_multi configures multicast addresses as needed for the
607 * netdev interface. It also sets up multicast, allmulti and promisc
608 * flags appropriately
611 spider_net_set_multi(struct net_device *netdev)
613 struct dev_mc_list *mc;
617 struct spider_net_card *card = netdev_priv(netdev);
618 unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] =
621 spider_net_set_promisc(card);
623 if (netdev->flags & IFF_ALLMULTI) {
624 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
630 /* well, we know, what the broadcast hash value is: it's xfd
631 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
632 set_bit(0xfd, bitmask);
634 for (mc = netdev->mc_list; mc; mc = mc->next) {
635 hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr);
636 set_bit(hash, bitmask);
640 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
642 if (test_bit(i * 4, bitmask))
645 if (test_bit(i * 4 + 1, bitmask))
648 if (test_bit(i * 4 + 2, bitmask))
651 if (test_bit(i * 4 + 3, bitmask))
654 spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
659 * spider_net_disable_rxdmac - disables the receive DMA controller
660 * @card: card structure
662 * spider_net_disable_rxdmac terminates processing on the DMA controller by
663 * turing off DMA and issueing a force end
666 spider_net_disable_rxdmac(struct spider_net_card *card)
668 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
669 SPIDER_NET_DMA_RX_FEND_VALUE);
673 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
674 * @card: card structure
675 * @descr: descriptor structure to fill out
676 * @skb: packet to use
678 * returns 0 on success, <0 on failure.
680 * fills out the descriptor structure with skb data and len. Copies data,
681 * if needed (32bit DMA!)
684 spider_net_prepare_tx_descr(struct spider_net_card *card,
687 struct spider_net_descr_chain *chain = &card->tx_chain;
688 struct spider_net_descr *descr;
689 struct spider_net_hw_descr *hwdescr;
693 buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
694 if (pci_dma_mapping_error(buf)) {
695 if (netif_msg_tx_err(card) && net_ratelimit())
696 pr_err("could not iommu-map packet (%p, %i). "
697 "Dropping packet\n", skb->data, skb->len);
698 card->spider_stats.tx_iommu_map_error++;
702 spin_lock_irqsave(&chain->lock, flags);
703 descr = card->tx_chain.head;
704 if (descr->next == chain->tail->prev) {
705 spin_unlock_irqrestore(&chain->lock, flags);
706 pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE);
709 hwdescr = descr->hwdescr;
710 chain->head = descr->next;
713 hwdescr->buf_addr = buf;
714 hwdescr->buf_size = skb->len;
715 hwdescr->next_descr_addr = 0;
716 hwdescr->data_status = 0;
718 hwdescr->dmac_cmd_status =
719 SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_NOCS;
720 spin_unlock_irqrestore(&chain->lock, flags);
722 if (skb->protocol == htons(ETH_P_IP) && skb->ip_summed == CHECKSUM_PARTIAL)
723 switch (ip_hdr(skb)->protocol) {
725 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
728 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
732 /* Chain the bus address, so that the DMA engine finds this descr. */
734 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
736 card->netdev->trans_start = jiffies; /* set netdev watchdog timer */
741 spider_net_set_low_watermark(struct spider_net_card *card)
743 struct spider_net_descr *descr = card->tx_chain.tail;
744 struct spider_net_hw_descr *hwdescr;
750 /* Measure the length of the queue. Measurement does not
751 * need to be precise -- does not need a lock. */
752 while (descr != card->tx_chain.head) {
753 status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
754 if (status == SPIDER_NET_DESCR_NOT_IN_USE)
760 /* If TX queue is short, don't even bother with interrupts */
761 if (cnt < card->tx_chain.num_desc/4)
764 /* Set low-watermark 3/4th's of the way into the queue. */
765 descr = card->tx_chain.tail;
770 /* Set the new watermark, clear the old watermark */
771 spin_lock_irqsave(&card->tx_chain.lock, flags);
772 descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
773 if (card->low_watermark && card->low_watermark != descr) {
774 hwdescr = card->low_watermark->hwdescr;
775 hwdescr->dmac_cmd_status =
776 hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
778 card->low_watermark = descr;
779 spin_unlock_irqrestore(&card->tx_chain.lock, flags);
784 * spider_net_release_tx_chain - processes sent tx descriptors
785 * @card: adapter structure
786 * @brutal: if set, don't care about whether descriptor seems to be in use
788 * returns 0 if the tx ring is empty, otherwise 1.
790 * spider_net_release_tx_chain releases the tx descriptors that spider has
791 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
792 * If some other context is calling this function, we return 1 so that we're
793 * scheduled again (if we were scheduled) and will not loose initiative.
796 spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
798 struct spider_net_descr_chain *chain = &card->tx_chain;
799 struct spider_net_descr *descr;
800 struct spider_net_hw_descr *hwdescr;
807 spin_lock_irqsave(&chain->lock, flags);
808 if (chain->tail == chain->head) {
809 spin_unlock_irqrestore(&chain->lock, flags);
813 hwdescr = descr->hwdescr;
815 status = spider_net_get_descr_status(hwdescr);
817 case SPIDER_NET_DESCR_COMPLETE:
818 card->netdev_stats.tx_packets++;
819 card->netdev_stats.tx_bytes += descr->skb->len;
822 case SPIDER_NET_DESCR_CARDOWNED:
824 spin_unlock_irqrestore(&chain->lock, flags);
828 /* fallthrough, if we release the descriptors
829 * brutally (then we don't care about
830 * SPIDER_NET_DESCR_CARDOWNED) */
832 case SPIDER_NET_DESCR_RESPONSE_ERROR:
833 case SPIDER_NET_DESCR_PROTECTION_ERROR:
834 case SPIDER_NET_DESCR_FORCE_END:
835 if (netif_msg_tx_err(card))
836 pr_err("%s: forcing end of tx descriptor "
837 "with status x%02x\n",
838 card->netdev->name, status);
839 card->netdev_stats.tx_errors++;
843 card->netdev_stats.tx_dropped++;
845 spin_unlock_irqrestore(&chain->lock, flags);
850 chain->tail = descr->next;
851 hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
854 buf_addr = hwdescr->buf_addr;
855 spin_unlock_irqrestore(&chain->lock, flags);
859 pci_unmap_single(card->pdev, buf_addr, skb->len,
868 * spider_net_kick_tx_dma - enables TX DMA processing
869 * @card: card structure
870 * @descr: descriptor address to enable TX processing at
872 * This routine will start the transmit DMA running if
873 * it is not already running. This routine ned only be
874 * called when queueing a new packet to an empty tx queue.
875 * Writes the current tx chain head as start address
876 * of the tx descriptor chain and enables the transmission
880 spider_net_kick_tx_dma(struct spider_net_card *card)
882 struct spider_net_descr *descr;
884 if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
885 SPIDER_NET_TX_DMA_EN)
888 descr = card->tx_chain.tail;
890 if (spider_net_get_descr_status(descr->hwdescr) ==
891 SPIDER_NET_DESCR_CARDOWNED) {
892 spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
894 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
895 SPIDER_NET_DMA_TX_VALUE);
898 if (descr == card->tx_chain.head)
904 mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
908 * spider_net_xmit - transmits a frame over the device
909 * @skb: packet to send out
910 * @netdev: interface device structure
912 * returns 0 on success, !0 on failure
915 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
918 struct spider_net_card *card = netdev_priv(netdev);
920 spider_net_release_tx_chain(card, 0);
922 if (spider_net_prepare_tx_descr(card, skb) != 0) {
923 card->netdev_stats.tx_dropped++;
924 netif_stop_queue(netdev);
925 return NETDEV_TX_BUSY;
928 cnt = spider_net_set_low_watermark(card);
930 spider_net_kick_tx_dma(card);
935 * spider_net_cleanup_tx_ring - cleans up the TX ring
936 * @card: card structure
938 * spider_net_cleanup_tx_ring is called by either the tx_timer
939 * or from the NAPI polling routine.
940 * This routine releases resources associted with transmitted
941 * packets, including updating the queue tail pointer.
944 spider_net_cleanup_tx_ring(struct spider_net_card *card)
946 if ((spider_net_release_tx_chain(card, 0) != 0) &&
947 (card->netdev->flags & IFF_UP)) {
948 spider_net_kick_tx_dma(card);
949 netif_wake_queue(card->netdev);
954 * spider_net_do_ioctl - called for device ioctls
955 * @netdev: interface device structure
956 * @ifr: request parameter structure for ioctl
957 * @cmd: command code for ioctl
959 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
960 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
963 spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
972 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
973 * @descr: descriptor to process
974 * @card: card structure
976 * Fills out skb structure and passes the data to the stack.
977 * The descriptor state is not changed.
980 spider_net_pass_skb_up(struct spider_net_descr *descr,
981 struct spider_net_card *card)
983 struct spider_net_hw_descr *hwdescr= descr->hwdescr;
985 struct net_device *netdev;
986 u32 data_status, data_error;
988 data_status = hwdescr->data_status;
989 data_error = hwdescr->data_error;
990 netdev = card->netdev;
993 skb_put(skb, hwdescr->valid_size);
995 /* the card seems to add 2 bytes of junk in front
996 * of the ethernet frame */
997 #define SPIDER_MISALIGN 2
998 skb_pull(skb, SPIDER_MISALIGN);
999 skb->protocol = eth_type_trans(skb, netdev);
1001 /* checksum offload */
1002 if (card->options.rx_csum) {
1003 if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
1004 SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
1005 !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
1006 skb->ip_summed = CHECKSUM_UNNECESSARY;
1008 skb->ip_summed = CHECKSUM_NONE;
1010 skb->ip_summed = CHECKSUM_NONE;
1012 if (data_status & SPIDER_NET_VLAN_PACKET) {
1013 /* further enhancements: HW-accel VLAN
1014 * vlan_hwaccel_receive_skb
1018 /* pass skb up to stack */
1019 netif_receive_skb(skb);
1021 /* update netdevice statistics */
1022 card->netdev_stats.rx_packets++;
1023 card->netdev_stats.rx_bytes += skb->len;
1027 static void show_rx_chain(struct spider_net_card *card)
1029 struct spider_net_descr_chain *chain = &card->rx_chain;
1030 struct spider_net_descr *start= chain->tail;
1031 struct spider_net_descr *descr= start;
1035 int cstat = spider_net_get_descr_status(descr);
1036 printk(KERN_INFO "RX chain tail at descr=%ld\n",
1037 (start - card->descr) - card->tx_chain.num_desc);
1041 status = spider_net_get_descr_status(descr);
1042 if (cstat != status) {
1043 printk(KERN_INFO "Have %d descrs with stat=x%08x\n", cnt, cstat);
1048 descr = descr->next;
1049 } while (descr != start);
1050 printk(KERN_INFO "Last %d descrs with stat=x%08x\n", cnt, cstat);
1055 * spider_net_decode_one_descr - processes an RX descriptor
1056 * @card: card structure
1058 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1060 * Processes an RX descriptor by iommu-unmapping the data buffer
1061 * and passing the packet up to the stack. This function is called
1062 * in softirq context, e.g. either bottom half from interrupt or
1063 * NAPI polling context.
1066 spider_net_decode_one_descr(struct spider_net_card *card)
1068 struct spider_net_descr_chain *chain = &card->rx_chain;
1069 struct spider_net_descr *descr = chain->tail;
1070 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
1073 status = spider_net_get_descr_status(hwdescr);
1075 /* Nothing in the descriptor, or ring must be empty */
1076 if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
1077 (status == SPIDER_NET_DESCR_NOT_IN_USE))
1080 /* descriptor definitively used -- move on tail */
1081 chain->tail = descr->next;
1083 /* unmap descriptor */
1084 pci_unmap_single(card->pdev, hwdescr->buf_addr,
1085 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
1087 if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
1088 (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
1089 (status == SPIDER_NET_DESCR_FORCE_END) ) {
1090 if (netif_msg_rx_err(card))
1091 pr_err("%s: dropping RX descriptor with state %d\n",
1092 card->netdev->name, status);
1093 card->netdev_stats.rx_dropped++;
1097 if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
1098 (status != SPIDER_NET_DESCR_FRAME_END) ) {
1099 if (netif_msg_rx_err(card))
1100 pr_err("%s: RX descriptor with unknown state %d\n",
1101 card->netdev->name, status);
1102 card->spider_stats.rx_desc_unk_state++;
1106 /* The cases we'll throw away the packet immediately */
1107 if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
1108 if (netif_msg_rx_err(card))
1109 pr_err("%s: error in received descriptor found, "
1110 "data_status=x%08x, data_error=x%08x\n",
1112 hwdescr->data_status, hwdescr->data_error);
1116 if (hwdescr->dmac_cmd_status & 0xfefe) {
1117 pr_err("%s: bad status, cmd_status=x%08x\n",
1119 hwdescr->dmac_cmd_status);
1120 pr_err("buf_addr=x%08x\n", hwdescr->buf_addr);
1121 pr_err("buf_size=x%08x\n", hwdescr->buf_size);
1122 pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
1123 pr_err("result_size=x%08x\n", hwdescr->result_size);
1124 pr_err("valid_size=x%08x\n", hwdescr->valid_size);
1125 pr_err("data_status=x%08x\n", hwdescr->data_status);
1126 pr_err("data_error=x%08x\n", hwdescr->data_error);
1127 pr_err("which=%ld\n", descr - card->rx_chain.ring);
1129 card->spider_stats.rx_desc_error++;
1133 /* Ok, we've got a packet in descr */
1134 spider_net_pass_skb_up(descr, card);
1135 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1139 dev_kfree_skb_irq(descr->skb);
1141 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1146 * spider_net_poll - NAPI poll function called by the stack to return packets
1147 * @netdev: interface device structure
1148 * @budget: number of packets we can pass to the stack at most
1150 * returns 0 if no more packets available to the driver/stack. Returns 1,
1151 * if the quota is exceeded, but the driver has still packets.
1153 * spider_net_poll returns all packets from the rx descriptors to the stack
1154 * (using netif_receive_skb). If all/enough packets are up, the driver
1155 * reenables interrupts and returns 0. If not, 1 is returned.
1158 spider_net_poll(struct net_device *netdev, int *budget)
1160 struct spider_net_card *card = netdev_priv(netdev);
1161 int packets_to_do, packets_done = 0;
1162 int no_more_packets = 0;
1164 spider_net_cleanup_tx_ring(card);
1165 packets_to_do = min(*budget, netdev->quota);
1167 while (packets_to_do) {
1168 if (spider_net_decode_one_descr(card)) {
1172 /* no more packets for the stack */
1173 no_more_packets = 1;
1178 netdev->quota -= packets_done;
1179 *budget -= packets_done;
1180 spider_net_refill_rx_chain(card);
1181 spider_net_enable_rxdmac(card);
1183 /* if all packets are in the stack, enable interrupts and return 0 */
1184 /* if not, return 1 */
1185 if (no_more_packets) {
1186 netif_rx_complete(netdev);
1187 spider_net_rx_irq_on(card);
1195 * spider_net_vlan_rx_reg - initializes VLAN structures in the driver and card
1196 * @netdev: interface device structure
1197 * @grp: vlan_group structure that is registered (NULL on destroying interface)
1200 spider_net_vlan_rx_reg(struct net_device *netdev, struct vlan_group *grp)
1202 /* further enhancement... yet to do */
1207 * spider_net_vlan_rx_add - adds VLAN id to the card filter
1208 * @netdev: interface device structure
1209 * @vid: VLAN id to add
1212 spider_net_vlan_rx_add(struct net_device *netdev, uint16_t vid)
1214 /* further enhancement... yet to do */
1215 /* add vid to card's VLAN filter table */
1220 * spider_net_vlan_rx_kill - removes VLAN id to the card filter
1221 * @netdev: interface device structure
1222 * @vid: VLAN id to remove
1225 spider_net_vlan_rx_kill(struct net_device *netdev, uint16_t vid)
1227 /* further enhancement... yet to do */
1228 /* remove vid from card's VLAN filter table */
1232 * spider_net_get_stats - get interface statistics
1233 * @netdev: interface device structure
1235 * returns the interface statistics residing in the spider_net_card struct
1237 static struct net_device_stats *
1238 spider_net_get_stats(struct net_device *netdev)
1240 struct spider_net_card *card = netdev_priv(netdev);
1241 struct net_device_stats *stats = &card->netdev_stats;
1246 * spider_net_change_mtu - changes the MTU of an interface
1247 * @netdev: interface device structure
1248 * @new_mtu: new MTU value
1250 * returns 0 on success, <0 on failure
1253 spider_net_change_mtu(struct net_device *netdev, int new_mtu)
1255 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1256 * and mtu is outbound only anyway */
1257 if ( (new_mtu < SPIDER_NET_MIN_MTU ) ||
1258 (new_mtu > SPIDER_NET_MAX_MTU) )
1260 netdev->mtu = new_mtu;
1265 * spider_net_set_mac - sets the MAC of an interface
1266 * @netdev: interface device structure
1267 * @ptr: pointer to new MAC address
1269 * Returns 0 on success, <0 on failure. Currently, we don't support this
1270 * and will always return EOPNOTSUPP.
1273 spider_net_set_mac(struct net_device *netdev, void *p)
1275 struct spider_net_card *card = netdev_priv(netdev);
1276 u32 macl, macu, regvalue;
1277 struct sockaddr *addr = p;
1279 if (!is_valid_ether_addr(addr->sa_data))
1280 return -EADDRNOTAVAIL;
1282 /* switch off GMACTPE and GMACRPE */
1283 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1284 regvalue &= ~((1 << 5) | (1 << 6));
1285 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1288 macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) +
1289 (addr->sa_data[2]<<8) + (addr->sa_data[3]);
1290 macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]);
1291 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
1292 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
1294 /* switch GMACTPE and GMACRPE back on */
1295 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1296 regvalue |= ((1 << 5) | (1 << 6));
1297 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1299 spider_net_set_promisc(card);
1301 /* look up, whether we have been successful */
1302 if (spider_net_get_mac_address(netdev))
1303 return -EADDRNOTAVAIL;
1304 if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len))
1305 return -EADDRNOTAVAIL;
1311 * spider_net_link_reset
1312 * @netdev: net device structure
1314 * This is called when the PHY_LINK signal is asserted. For the blade this is
1315 * not connected so we should never get here.
1319 spider_net_link_reset(struct net_device *netdev)
1322 struct spider_net_card *card = netdev_priv(netdev);
1324 del_timer_sync(&card->aneg_timer);
1326 /* clear interrupt, block further interrupts */
1327 spider_net_write_reg(card, SPIDER_NET_GMACST,
1328 spider_net_read_reg(card, SPIDER_NET_GMACST));
1329 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1331 /* reset phy and setup aneg */
1332 spider_net_setup_aneg(card);
1333 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1338 * spider_net_handle_error_irq - handles errors raised by an interrupt
1339 * @card: card structure
1340 * @status_reg: interrupt status register 0 (GHIINT0STS)
1342 * spider_net_handle_error_irq treats or ignores all error conditions
1343 * found when an interrupt is presented
1346 spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
1348 u32 error_reg1, error_reg2;
1352 error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
1353 error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
1355 /* check GHIINT0STS ************************************/
1357 for (i = 0; i < 32; i++)
1358 if (status_reg & (1<<i))
1361 /* let error_reg1 and error_reg2 evaluation decide, what to do
1362 case SPIDER_NET_PHYINT:
1363 case SPIDER_NET_GMAC2INT:
1364 case SPIDER_NET_GMAC1INT:
1365 case SPIDER_NET_GFIFOINT:
1366 case SPIDER_NET_DMACINT:
1367 case SPIDER_NET_GSYSINT:
1370 case SPIDER_NET_GIPSINT:
1374 case SPIDER_NET_GPWOPCMPINT:
1375 /* PHY write operation completed */
1378 case SPIDER_NET_GPROPCMPINT:
1379 /* PHY read operation completed */
1380 /* we don't use semaphores, as we poll for the completion
1381 * of the read operation in spider_net_read_phy. Should take
1385 case SPIDER_NET_GPWFFINT:
1386 /* PHY command queue full */
1387 if (netif_msg_intr(card))
1388 pr_err("PHY write queue full\n");
1392 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1393 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1394 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1396 case SPIDER_NET_GDTDEN0INT:
1397 /* someone has set TX_DMA_EN to 0 */
1401 case SPIDER_NET_GDDDEN0INT: /* fallthrough */
1402 case SPIDER_NET_GDCDEN0INT: /* fallthrough */
1403 case SPIDER_NET_GDBDEN0INT: /* fallthrough */
1404 case SPIDER_NET_GDADEN0INT:
1405 /* someone has set RX_DMA_EN to 0 */
1410 case SPIDER_NET_GDDFDCINT:
1411 case SPIDER_NET_GDCFDCINT:
1412 case SPIDER_NET_GDBFDCINT:
1413 case SPIDER_NET_GDAFDCINT:
1414 /* case SPIDER_NET_GDNMINT: not used. print a message */
1415 /* case SPIDER_NET_GCNMINT: not used. print a message */
1416 /* case SPIDER_NET_GBNMINT: not used. print a message */
1417 /* case SPIDER_NET_GANMINT: not used. print a message */
1418 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1423 case SPIDER_NET_GDTFDCINT:
1426 case SPIDER_NET_GTTEDINT:
1429 case SPIDER_NET_GDTDCEINT:
1430 /* chain end. If a descriptor should be sent, kick off
1432 if (card->tx_chain.tail != card->tx_chain.head)
1433 spider_net_kick_tx_dma(card);
1438 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1439 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1442 /* check GHIINT1STS ************************************/
1444 for (i = 0; i < 32; i++)
1445 if (error_reg1 & (1<<i))
1448 case SPIDER_NET_GTMFLLINT:
1449 /* TX RAM full may happen on a usual case.
1450 * Logging is not needed. */
1453 case SPIDER_NET_GRFDFLLINT: /* fallthrough */
1454 case SPIDER_NET_GRFCFLLINT: /* fallthrough */
1455 case SPIDER_NET_GRFBFLLINT: /* fallthrough */
1456 case SPIDER_NET_GRFAFLLINT: /* fallthrough */
1457 case SPIDER_NET_GRMFLLINT:
1458 if (netif_msg_intr(card) && net_ratelimit())
1459 pr_err("Spider RX RAM full, incoming packets "
1460 "might be discarded!\n");
1461 spider_net_rx_irq_off(card);
1462 netif_rx_schedule(card->netdev);
1466 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1467 case SPIDER_NET_GDTINVDINT:
1468 /* allrighty. tx from previous descr ok */
1473 case SPIDER_NET_GDDDCEINT: /* fallthrough */
1474 case SPIDER_NET_GDCDCEINT: /* fallthrough */
1475 case SPIDER_NET_GDBDCEINT: /* fallthrough */
1476 case SPIDER_NET_GDADCEINT:
1477 if (netif_msg_intr(card) && net_ratelimit())
1478 pr_err("got descriptor chain end interrupt, "
1479 "restarting DMAC %c.\n",
1480 'D'-(i-SPIDER_NET_GDDDCEINT)/3);
1481 spider_net_refill_rx_chain(card);
1482 spider_net_enable_rxdmac(card);
1486 /* invalid descriptor */
1487 case SPIDER_NET_GDDINVDINT: /* fallthrough */
1488 case SPIDER_NET_GDCINVDINT: /* fallthrough */
1489 case SPIDER_NET_GDBINVDINT: /* fallthrough */
1490 case SPIDER_NET_GDAINVDINT:
1491 /* could happen when rx chain is full */
1492 spider_net_refill_rx_chain(card);
1493 spider_net_enable_rxdmac(card);
1497 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1498 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1499 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1500 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1501 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1502 /* case SPIDER_NET_GDSERINT: problem, print a message */
1503 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1504 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1505 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1506 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1507 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1513 /* check GHIINT2STS ************************************/
1515 for (i = 0; i < 32; i++)
1516 if (error_reg2 & (1<<i))
1519 /* there is nothing we can (want to) do at this time. Log a
1520 * message, we can switch on and off the specific values later on
1521 case SPIDER_NET_GPROPERINT:
1522 case SPIDER_NET_GMCTCRSNGINT:
1523 case SPIDER_NET_GMCTLCOLINT:
1524 case SPIDER_NET_GMCTTMOTINT:
1525 case SPIDER_NET_GMCRCAERINT:
1526 case SPIDER_NET_GMCRCALERINT:
1527 case SPIDER_NET_GMCRALNERINT:
1528 case SPIDER_NET_GMCROVRINT:
1529 case SPIDER_NET_GMCRRNTINT:
1530 case SPIDER_NET_GMCRRXERINT:
1531 case SPIDER_NET_GTITCSERINT:
1532 case SPIDER_NET_GTIFMTERINT:
1533 case SPIDER_NET_GTIPKTRVKINT:
1534 case SPIDER_NET_GTISPINGINT:
1535 case SPIDER_NET_GTISADNGINT:
1536 case SPIDER_NET_GTISPDNGINT:
1537 case SPIDER_NET_GRIFMTERINT:
1538 case SPIDER_NET_GRIPKTRVKINT:
1539 case SPIDER_NET_GRISPINGINT:
1540 case SPIDER_NET_GRISADNGINT:
1541 case SPIDER_NET_GRISPDNGINT:
1548 if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
1549 pr_err("Got error interrupt on %s, GHIINT0STS = 0x%08x, "
1550 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1552 status_reg, error_reg1, error_reg2);
1554 /* clear interrupt sources */
1555 spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
1556 spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
1560 * spider_net_interrupt - interrupt handler for spider_net
1561 * @irq: interupt number
1562 * @ptr: pointer to net_device
1563 * @regs: PU registers
1565 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1566 * interrupt found raised by card.
1568 * This is the interrupt handler, that turns off
1569 * interrupts for this device and makes the stack poll the driver
1572 spider_net_interrupt(int irq, void *ptr)
1574 struct net_device *netdev = ptr;
1575 struct spider_net_card *card = netdev_priv(netdev);
1578 status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
1583 if (status_reg & SPIDER_NET_RXINT ) {
1584 spider_net_rx_irq_off(card);
1585 netif_rx_schedule(netdev);
1587 if (status_reg & SPIDER_NET_TXINT)
1588 netif_rx_schedule(netdev);
1590 if (status_reg & SPIDER_NET_LINKINT)
1591 spider_net_link_reset(netdev);
1593 if (status_reg & SPIDER_NET_ERRINT )
1594 spider_net_handle_error_irq(card, status_reg);
1596 /* clear interrupt sources */
1597 spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
1602 #ifdef CONFIG_NET_POLL_CONTROLLER
1604 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1605 * @netdev: interface device structure
1607 * see Documentation/networking/netconsole.txt
1610 spider_net_poll_controller(struct net_device *netdev)
1612 disable_irq(netdev->irq);
1613 spider_net_interrupt(netdev->irq, netdev);
1614 enable_irq(netdev->irq);
1616 #endif /* CONFIG_NET_POLL_CONTROLLER */
1619 * spider_net_init_card - initializes the card
1620 * @card: card structure
1622 * spider_net_init_card initializes the card so that other registers can
1626 spider_net_init_card(struct spider_net_card *card)
1628 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1629 SPIDER_NET_CKRCTRL_STOP_VALUE);
1631 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1632 SPIDER_NET_CKRCTRL_RUN_VALUE);
1634 /* trigger ETOMOD signal */
1635 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1636 spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
1641 * spider_net_enable_card - enables the card by setting all kinds of regs
1642 * @card: card structure
1644 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1647 spider_net_enable_card(struct spider_net_card *card)
1650 /* the following array consists of (register),(value) pairs
1651 * that are set in this function. A register of 0 ends the list */
1653 { SPIDER_NET_GRESUMINTNUM, 0 },
1654 { SPIDER_NET_GREINTNUM, 0 },
1656 /* set interrupt frame number registers */
1657 /* clear the single DMA engine registers first */
1658 { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1659 { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1660 { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1661 { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1662 /* then set, what we really need */
1663 { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
1665 /* timer counter registers and stuff */
1666 { SPIDER_NET_GFREECNNUM, 0 },
1667 { SPIDER_NET_GONETIMENUM, 0 },
1668 { SPIDER_NET_GTOUTFRMNUM, 0 },
1670 /* RX mode setting */
1671 { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
1672 /* TX mode setting */
1673 { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
1674 /* IPSEC mode setting */
1675 { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
1677 { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
1679 { SPIDER_NET_GMRWOLCTRL, 0 },
1680 { SPIDER_NET_GTESTMD, 0x10000000 },
1681 { SPIDER_NET_GTTQMSK, 0x00400040 },
1683 { SPIDER_NET_GMACINTEN, 0 },
1685 /* flow control stuff */
1686 { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
1687 { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
1689 { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
1694 while (regs[i][0]) {
1695 spider_net_write_reg(card, regs[i][0], regs[i][1]);
1699 /* clear unicast filter table entries 1 to 14 */
1700 for (i = 1; i <= 14; i++) {
1701 spider_net_write_reg(card,
1702 SPIDER_NET_GMRUAFILnR + i * 8,
1704 spider_net_write_reg(card,
1705 SPIDER_NET_GMRUAFILnR + i * 8 + 4,
1709 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
1711 spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
1713 /* set chain tail adress for RX chains and
1715 spider_net_enable_rxchtails(card);
1716 spider_net_enable_rxdmac(card);
1718 spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
1720 spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
1721 SPIDER_NET_LENLMT_VALUE);
1722 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1723 SPIDER_NET_OPMODE_VALUE);
1725 /* set interrupt mask registers */
1726 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
1727 SPIDER_NET_INT0_MASK_VALUE);
1728 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
1729 SPIDER_NET_INT1_MASK_VALUE);
1730 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
1731 SPIDER_NET_INT2_MASK_VALUE);
1733 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
1734 SPIDER_NET_GDTBSTA);
1738 * spider_net_download_firmware - loads firmware into the adapter
1739 * @card: card structure
1740 * @firmware_ptr: pointer to firmware data
1742 * spider_net_download_firmware loads the firmware data into the
1743 * adapter. It assumes the length etc. to be allright.
1746 spider_net_download_firmware(struct spider_net_card *card,
1747 const void *firmware_ptr)
1750 const u32 *fw_ptr = firmware_ptr;
1752 /* stop sequencers */
1753 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1754 SPIDER_NET_STOP_SEQ_VALUE);
1756 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
1758 spider_net_write_reg(card,
1759 SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
1760 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
1761 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
1762 sequencer * 8, *fw_ptr);
1767 if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
1770 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1771 SPIDER_NET_RUN_SEQ_VALUE);
1777 * spider_net_init_firmware - reads in firmware parts
1778 * @card: card structure
1780 * Returns 0 on success, <0 on failure
1782 * spider_net_init_firmware opens the sequencer firmware and does some basic
1783 * checks. This function opens and releases the firmware structure. A call
1784 * to download the firmware is performed before the release.
1788 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1789 * the program for each sequencer. Use the command
1790 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1791 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1792 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1794 * to generate spider_fw.bin, if you have sequencer programs with something
1795 * like the following contents for each sequencer:
1796 * <ONE LINE COMMENT>
1797 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1798 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1800 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1803 spider_net_init_firmware(struct spider_net_card *card)
1805 struct firmware *firmware = NULL;
1806 struct device_node *dn;
1807 const u8 *fw_prop = NULL;
1811 if (request_firmware((const struct firmware **)&firmware,
1812 SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
1813 if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
1814 netif_msg_probe(card) ) {
1815 pr_err("Incorrect size of spidernet firmware in " \
1816 "filesystem. Looking in host firmware...\n");
1819 err = spider_net_download_firmware(card, firmware->data);
1821 release_firmware(firmware);
1829 dn = pci_device_to_OF_node(card->pdev);
1833 fw_prop = of_get_property(dn, "firmware", &fw_size);
1837 if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
1838 netif_msg_probe(card) ) {
1839 pr_err("Incorrect size of spidernet firmware in " \
1844 err = spider_net_download_firmware(card, fw_prop);
1849 if (netif_msg_probe(card))
1850 pr_err("Couldn't find spidernet firmware in filesystem " \
1851 "or host firmware\n");
1856 * spider_net_open - called upon ifonfig up
1857 * @netdev: interface device structure
1859 * returns 0 on success, <0 on failure
1861 * spider_net_open allocates all the descriptors and memory needed for
1862 * operation, sets up multicast list and enables interrupts
1865 spider_net_open(struct net_device *netdev)
1867 struct spider_net_card *card = netdev_priv(netdev);
1870 result = spider_net_init_firmware(card);
1872 goto init_firmware_failed;
1874 /* start probing with copper */
1875 spider_net_setup_aneg(card);
1876 if (card->phy.def->phy_id)
1877 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1879 result = spider_net_init_chain(card, &card->tx_chain);
1881 goto alloc_tx_failed;
1882 card->low_watermark = NULL;
1884 result = spider_net_init_chain(card, &card->rx_chain);
1886 goto alloc_rx_failed;
1888 /* Allocate rx skbs */
1889 if (spider_net_alloc_rx_skbs(card))
1890 goto alloc_skbs_failed;
1892 spider_net_set_multi(netdev);
1894 /* further enhancement: setup hw vlan, if needed */
1897 if (request_irq(netdev->irq, spider_net_interrupt,
1898 IRQF_SHARED, netdev->name, netdev))
1899 goto register_int_failed;
1901 spider_net_enable_card(card);
1903 netif_start_queue(netdev);
1904 netif_carrier_on(netdev);
1905 netif_poll_enable(netdev);
1909 register_int_failed:
1910 spider_net_free_rx_chain_contents(card);
1912 spider_net_free_chain(card, &card->rx_chain);
1914 spider_net_free_chain(card, &card->tx_chain);
1916 del_timer_sync(&card->aneg_timer);
1917 init_firmware_failed:
1922 * spider_net_link_phy
1923 * @data: used for pointer to card structure
1926 static void spider_net_link_phy(unsigned long data)
1928 struct spider_net_card *card = (struct spider_net_card *)data;
1929 struct mii_phy *phy = &card->phy;
1931 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
1932 if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) {
1934 pr_info("%s: link is down trying to bring it up\n", card->netdev->name);
1936 switch (card->medium) {
1937 case BCM54XX_COPPER:
1938 /* enable fiber with autonegotiation first */
1939 if (phy->def->ops->enable_fiber)
1940 phy->def->ops->enable_fiber(phy, 1);
1941 card->medium = BCM54XX_FIBER;
1945 /* fiber didn't come up, try to disable fiber autoneg */
1946 if (phy->def->ops->enable_fiber)
1947 phy->def->ops->enable_fiber(phy, 0);
1948 card->medium = BCM54XX_UNKNOWN;
1951 case BCM54XX_UNKNOWN:
1952 /* copper, fiber with and without failed,
1953 * retry from beginning */
1954 spider_net_setup_aneg(card);
1955 card->medium = BCM54XX_COPPER;
1959 card->aneg_count = 0;
1960 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1964 /* link still not up, try again later */
1965 if (!(phy->def->ops->poll_link(phy))) {
1967 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1971 /* link came up, get abilities */
1972 phy->def->ops->read_link(phy);
1974 spider_net_write_reg(card, SPIDER_NET_GMACST,
1975 spider_net_read_reg(card, SPIDER_NET_GMACST));
1976 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);
1978 if (phy->speed == 1000)
1979 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001);
1981 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0);
1983 card->aneg_count = 0;
1985 pr_debug("Found %s with %i Mbps, %s-duplex %sautoneg.\n",
1986 phy->def->name, phy->speed, phy->duplex==1 ? "Full" : "Half",
1987 phy->autoneg==1 ? "" : "no ");
1993 * spider_net_setup_phy - setup PHY
1994 * @card: card structure
1996 * returns 0 on success, <0 on failure
1998 * spider_net_setup_phy is used as part of spider_net_probe.
2001 spider_net_setup_phy(struct spider_net_card *card)
2003 struct mii_phy *phy = &card->phy;
2005 spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
2006 SPIDER_NET_DMASEL_VALUE);
2007 spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
2008 SPIDER_NET_PHY_CTRL_VALUE);
2010 phy->dev = card->netdev;
2011 phy->mdio_read = spider_net_read_phy;
2012 phy->mdio_write = spider_net_write_phy;
2014 for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) {
2016 id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
2017 if (id != 0x0000 && id != 0xffff) {
2018 if (!mii_phy_probe(phy, phy->mii_id)) {
2019 pr_info("Found %s.\n", phy->def->name);
2029 * spider_net_workaround_rxramfull - work around firmware bug
2030 * @card: card structure
2035 spider_net_workaround_rxramfull(struct spider_net_card *card)
2037 int i, sequencer = 0;
2040 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2041 SPIDER_NET_CKRCTRL_RUN_VALUE);
2043 /* empty sequencer data */
2044 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
2046 spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
2047 sequencer * 8, 0x0);
2048 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
2049 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
2050 sequencer * 8, 0x0);
2054 /* set sequencer operation */
2055 spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
2058 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2059 SPIDER_NET_CKRCTRL_STOP_VALUE);
2063 * spider_net_stop - called upon ifconfig down
2064 * @netdev: interface device structure
2069 spider_net_stop(struct net_device *netdev)
2071 struct spider_net_card *card = netdev_priv(netdev);
2073 netif_poll_disable(netdev);
2074 netif_carrier_off(netdev);
2075 netif_stop_queue(netdev);
2076 del_timer_sync(&card->tx_timer);
2077 del_timer_sync(&card->aneg_timer);
2079 /* disable/mask all interrupts */
2080 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
2081 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
2082 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
2083 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
2085 free_irq(netdev->irq, netdev);
2087 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
2088 SPIDER_NET_DMA_TX_FEND_VALUE);
2090 /* turn off DMA, force end */
2091 spider_net_disable_rxdmac(card);
2093 /* release chains */
2094 spider_net_release_tx_chain(card, 1);
2095 spider_net_free_rx_chain_contents(card);
2097 spider_net_free_chain(card, &card->tx_chain);
2098 spider_net_free_chain(card, &card->rx_chain);
2104 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2105 * function (to be called not under interrupt status)
2106 * @data: data, is interface device structure
2108 * called as task when tx hangs, resets interface (if interface is up)
2111 spider_net_tx_timeout_task(struct work_struct *work)
2113 struct spider_net_card *card =
2114 container_of(work, struct spider_net_card, tx_timeout_task);
2115 struct net_device *netdev = card->netdev;
2117 if (!(netdev->flags & IFF_UP))
2120 netif_device_detach(netdev);
2121 spider_net_stop(netdev);
2123 spider_net_workaround_rxramfull(card);
2124 spider_net_init_card(card);
2126 if (spider_net_setup_phy(card))
2129 spider_net_open(netdev);
2130 spider_net_kick_tx_dma(card);
2131 netif_device_attach(netdev);
2134 atomic_dec(&card->tx_timeout_task_counter);
2138 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2139 * @netdev: interface device structure
2141 * called, if tx hangs. Schedules a task that resets the interface
2144 spider_net_tx_timeout(struct net_device *netdev)
2146 struct spider_net_card *card;
2148 card = netdev_priv(netdev);
2149 atomic_inc(&card->tx_timeout_task_counter);
2150 if (netdev->flags & IFF_UP)
2151 schedule_work(&card->tx_timeout_task);
2153 atomic_dec(&card->tx_timeout_task_counter);
2154 card->spider_stats.tx_timeouts++;
2158 * spider_net_setup_netdev_ops - initialization of net_device operations
2159 * @netdev: net_device structure
2161 * fills out function pointers in the net_device structure
2164 spider_net_setup_netdev_ops(struct net_device *netdev)
2166 netdev->open = &spider_net_open;
2167 netdev->stop = &spider_net_stop;
2168 netdev->hard_start_xmit = &spider_net_xmit;
2169 netdev->get_stats = &spider_net_get_stats;
2170 netdev->set_multicast_list = &spider_net_set_multi;
2171 netdev->set_mac_address = &spider_net_set_mac;
2172 netdev->change_mtu = &spider_net_change_mtu;
2173 netdev->do_ioctl = &spider_net_do_ioctl;
2175 netdev->tx_timeout = &spider_net_tx_timeout;
2176 netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
2178 netdev->poll = &spider_net_poll;
2179 netdev->weight = SPIDER_NET_NAPI_WEIGHT;
2181 netdev->vlan_rx_register = &spider_net_vlan_rx_reg;
2182 netdev->vlan_rx_add_vid = &spider_net_vlan_rx_add;
2183 netdev->vlan_rx_kill_vid = &spider_net_vlan_rx_kill;
2184 #ifdef CONFIG_NET_POLL_CONTROLLER
2185 /* poll controller */
2186 netdev->poll_controller = &spider_net_poll_controller;
2187 #endif /* CONFIG_NET_POLL_CONTROLLER */
2189 netdev->ethtool_ops = &spider_net_ethtool_ops;
2193 * spider_net_setup_netdev - initialization of net_device
2194 * @card: card structure
2196 * Returns 0 on success or <0 on failure
2198 * spider_net_setup_netdev initializes the net_device structure
2201 spider_net_setup_netdev(struct spider_net_card *card)
2204 struct net_device *netdev = card->netdev;
2205 struct device_node *dn;
2206 struct sockaddr addr;
2209 SET_MODULE_OWNER(netdev);
2210 SET_NETDEV_DEV(netdev, &card->pdev->dev);
2212 pci_set_drvdata(card->pdev, netdev);
2214 init_timer(&card->tx_timer);
2215 card->tx_timer.function =
2216 (void (*)(unsigned long)) spider_net_cleanup_tx_ring;
2217 card->tx_timer.data = (unsigned long) card;
2218 netdev->irq = card->pdev->irq;
2220 card->aneg_count = 0;
2221 init_timer(&card->aneg_timer);
2222 card->aneg_timer.function = spider_net_link_phy;
2223 card->aneg_timer.data = (unsigned long) card;
2225 card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT;
2227 spider_net_setup_netdev_ops(netdev);
2229 netdev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX;
2230 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2231 * NETIF_F_HW_VLAN_FILTER */
2233 netdev->irq = card->pdev->irq;
2235 dn = pci_device_to_OF_node(card->pdev);
2239 mac = of_get_property(dn, "local-mac-address", NULL);
2242 memcpy(addr.sa_data, mac, ETH_ALEN);
2244 result = spider_net_set_mac(netdev, &addr);
2245 if ((result) && (netif_msg_probe(card)))
2246 pr_err("Failed to set MAC address: %i\n", result);
2248 result = register_netdev(netdev);
2250 if (netif_msg_probe(card))
2251 pr_err("Couldn't register net_device: %i\n",
2256 if (netif_msg_probe(card))
2257 pr_info("Initialized device %s.\n", netdev->name);
2263 * spider_net_alloc_card - allocates net_device and card structure
2265 * returns the card structure or NULL in case of errors
2267 * the card and net_device structures are linked to each other
2269 static struct spider_net_card *
2270 spider_net_alloc_card(void)
2272 struct net_device *netdev;
2273 struct spider_net_card *card;
2276 alloc_size = sizeof(struct spider_net_card) +
2277 (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr);
2278 netdev = alloc_etherdev(alloc_size);
2282 card = netdev_priv(netdev);
2283 card->netdev = netdev;
2284 card->msg_enable = SPIDER_NET_DEFAULT_MSG;
2285 INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task);
2286 init_waitqueue_head(&card->waitq);
2287 atomic_set(&card->tx_timeout_task_counter, 0);
2289 card->rx_chain.num_desc = rx_descriptors;
2290 card->rx_chain.ring = card->darray;
2291 card->tx_chain.num_desc = tx_descriptors;
2292 card->tx_chain.ring = card->darray + rx_descriptors;
2298 * spider_net_undo_pci_setup - releases PCI ressources
2299 * @card: card structure
2301 * spider_net_undo_pci_setup releases the mapped regions
2304 spider_net_undo_pci_setup(struct spider_net_card *card)
2306 iounmap(card->regs);
2307 pci_release_regions(card->pdev);
2311 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2312 * @card: card structure
2315 * Returns the card structure or NULL if any errors occur
2317 * spider_net_setup_pci_dev initializes pdev and together with the
2318 * functions called in spider_net_open configures the device so that
2319 * data can be transferred over it
2320 * The net_device structure is attached to the card structure, if the
2321 * function returns without error.
2323 static struct spider_net_card *
2324 spider_net_setup_pci_dev(struct pci_dev *pdev)
2326 struct spider_net_card *card;
2327 unsigned long mmio_start, mmio_len;
2329 if (pci_enable_device(pdev)) {
2330 pr_err("Couldn't enable PCI device\n");
2334 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2335 pr_err("Couldn't find proper PCI device base address.\n");
2336 goto out_disable_dev;
2339 if (pci_request_regions(pdev, spider_net_driver_name)) {
2340 pr_err("Couldn't obtain PCI resources, aborting.\n");
2341 goto out_disable_dev;
2344 pci_set_master(pdev);
2346 card = spider_net_alloc_card();
2348 pr_err("Couldn't allocate net_device structure, "
2350 goto out_release_regions;
2354 /* fetch base address and length of first resource */
2355 mmio_start = pci_resource_start(pdev, 0);
2356 mmio_len = pci_resource_len(pdev, 0);
2358 card->netdev->mem_start = mmio_start;
2359 card->netdev->mem_end = mmio_start + mmio_len;
2360 card->regs = ioremap(mmio_start, mmio_len);
2363 pr_err("Couldn't obtain PCI resources, aborting.\n");
2364 goto out_release_regions;
2369 out_release_regions:
2370 pci_release_regions(pdev);
2372 pci_disable_device(pdev);
2373 pci_set_drvdata(pdev, NULL);
2378 * spider_net_probe - initialization of a device
2380 * @ent: entry in the device id list
2382 * Returns 0 on success, <0 on failure
2384 * spider_net_probe initializes pdev and registers a net_device
2385 * structure for it. After that, the device can be ifconfig'ed up
2387 static int __devinit
2388 spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2391 struct spider_net_card *card;
2393 card = spider_net_setup_pci_dev(pdev);
2397 spider_net_workaround_rxramfull(card);
2398 spider_net_init_card(card);
2400 err = spider_net_setup_phy(card);
2404 err = spider_net_setup_netdev(card);
2411 spider_net_undo_pci_setup(card);
2412 free_netdev(card->netdev);
2418 * spider_net_remove - removal of a device
2421 * Returns 0 on success, <0 on failure
2423 * spider_net_remove is called to remove the device and unregisters the
2426 static void __devexit
2427 spider_net_remove(struct pci_dev *pdev)
2429 struct net_device *netdev;
2430 struct spider_net_card *card;
2432 netdev = pci_get_drvdata(pdev);
2433 card = netdev_priv(netdev);
2435 wait_event(card->waitq,
2436 atomic_read(&card->tx_timeout_task_counter) == 0);
2438 unregister_netdev(netdev);
2440 /* switch off card */
2441 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2442 SPIDER_NET_CKRCTRL_STOP_VALUE);
2443 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2444 SPIDER_NET_CKRCTRL_RUN_VALUE);
2446 spider_net_undo_pci_setup(card);
2447 free_netdev(netdev);
2450 static struct pci_driver spider_net_driver = {
2451 .name = spider_net_driver_name,
2452 .id_table = spider_net_pci_tbl,
2453 .probe = spider_net_probe,
2454 .remove = __devexit_p(spider_net_remove)
2458 * spider_net_init - init function when the driver is loaded
2460 * spider_net_init registers the device driver
2462 static int __init spider_net_init(void)
2464 printk(KERN_INFO "Spidernet version %s.\n", VERSION);
2466 if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
2467 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
2468 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2470 if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
2471 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
2472 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2474 if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
2475 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
2476 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2478 if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
2479 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
2480 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2483 return pci_register_driver(&spider_net_driver);
2487 * spider_net_cleanup - exit function when driver is unloaded
2489 * spider_net_cleanup unregisters the device driver
2491 static void __exit spider_net_cleanup(void)
2493 pci_unregister_driver(&spider_net_driver);
2496 module_init(spider_net_init);
2497 module_exit(spider_net_cleanup);