git.oblomov.eu Git - linux-2.6/blob - drivers/net/ixgbe/ixgbe_phy.c

   1 /*******************************************************************************
   2
   3   Intel 10 Gigabit PCI Express Linux driver
   4   Copyright(c) 1999 - 2009 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  24   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  25
  26 *******************************************************************************/
  27
  28 #include <linux/pci.h>
  29 #include <linux/delay.h>
  30 #include <linux/sched.h>
  31
  32 #include "ixgbe_common.h"
  33 #include "ixgbe_phy.h"
  34
  35 static void ixgbe_i2c_start(struct ixgbe_hw *hw);
  36 static void ixgbe_i2c_stop(struct ixgbe_hw *hw);
  37 static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
  38 static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
  39 static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
  40 static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
  41 static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
  42 static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
  43 static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
  44 static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
  45 static bool ixgbe_get_i2c_data(u32 *i2cctl);
  46 static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
  47 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
  48 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
  49
  50 /**
  51  *  ixgbe_identify_phy_generic - Get physical layer module
  52  *  @hw: pointer to hardware structure
  53  *
  54  *  Determines the physical layer module found on the current adapter.
  55  **/
  56 s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
  57 {
  58         s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
  59         u32 phy_addr;
  60
  61         if (hw->phy.type == ixgbe_phy_unknown) {
  62                 for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
  63                         hw->phy.mdio.prtad = phy_addr;
  64                         if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
  65                                 ixgbe_get_phy_id(hw);
  66                                 hw->phy.type =
  67                                         ixgbe_get_phy_type_from_id(hw->phy.id);
  68                                 status = 0;
  69                                 break;
  70                         }
  71                 }
  72                 /* clear value if nothing found */
  73                 hw->phy.mdio.prtad = 0;
  74         } else {
  75                 status = 0;
  76         }
  77
  78         return status;
  79 }
  80
  81 /**
  82  *  ixgbe_get_phy_id - Get the phy type
  83  *  @hw: pointer to hardware structure
  84  *
  85  **/
  86 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
  87 {
  88         u32 status;
  89         u16 phy_id_high = 0;
  90         u16 phy_id_low = 0;
  91
  92         status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
  93                                       &phy_id_high);
  94
  95         if (status == 0) {
  96                 hw->phy.id = (u32)(phy_id_high << 16);
  97                 status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
  98                                               &phy_id_low);
  99                 hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
 100                 hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
 101         }
 102         return status;
 103 }
 104
 105 /**
 106  *  ixgbe_get_phy_type_from_id - Get the phy type
 107  *  @hw: pointer to hardware structure
 108  *
 109  **/
 110 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 111 {
 112         enum ixgbe_phy_type phy_type;
 113
 114         switch (phy_id) {
 115         case TN1010_PHY_ID:
 116                 phy_type = ixgbe_phy_tn;
 117                 break;
 118         case QT2022_PHY_ID:
 119                 phy_type = ixgbe_phy_qt;
 120                 break;
 121         case ATH_PHY_ID:
 122                 phy_type = ixgbe_phy_nl;
 123                 break;
 124         default:
 125                 phy_type = ixgbe_phy_unknown;
 126                 break;
 127         }
 128
 129         return phy_type;
 130 }
 131
 132 /**
 133  *  ixgbe_reset_phy_generic - Performs a PHY reset
 134  *  @hw: pointer to hardware structure
 135  **/
 136 s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
 137 {
 138         /*
 139          * Perform soft PHY reset to the PHY_XS.
 140          * This will cause a soft reset to the PHY
 141          */
 142         return hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
 143                                      MDIO_CTRL1_RESET);
 144 }
 145
 146 /**
 147  *  ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
 148  *  @hw: pointer to hardware structure
 149  *  @reg_addr: 32 bit address of PHY register to read
 150  *  @phy_data: Pointer to read data from PHY register
 151  **/
 152 s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 153                                u32 device_type, u16 *phy_data)
 154 {
 155         u32 command;
 156         u32 i;
 157         u32 data;
 158         s32 status = 0;
 159         u16 gssr;
 160
 161         if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
 162                 gssr = IXGBE_GSSR_PHY1_SM;
 163         else
 164                 gssr = IXGBE_GSSR_PHY0_SM;
 165
 166         if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
 167                 status = IXGBE_ERR_SWFW_SYNC;
 168
 169         if (status == 0) {
 170                 /* Setup and write the address cycle command */
 171                 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 172                            (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 173                            (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 174                            (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 175
 176                 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 177
 178                 /*
 179                  * Check every 10 usec to see if the address cycle completed.
 180                  * The MDI Command bit will clear when the operation is
 181                  * complete
 182                  */
 183                 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 184                         udelay(10);
 185
 186                         command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 187
 188                         if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 189                                 break;
 190                 }
 191
 192                 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 193                         hw_dbg(hw, "PHY address command did not complete.\n");
 194                         status = IXGBE_ERR_PHY;
 195                 }
 196
 197                 if (status == 0) {
 198                         /*
 199                          * Address cycle complete, setup and write the read
 200                          * command
 201                          */
 202                         command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 203                                    (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 204                                    (hw->phy.mdio.prtad <<
 205                                     IXGBE_MSCA_PHY_ADDR_SHIFT) |
 206                                    (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
 207
 208                         IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 209
 210                         /*
 211                          * Check every 10 usec to see if the address cycle
 212                          * completed. The MDI Command bit will clear when the
 213                          * operation is complete
 214                          */
 215                         for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 216                                 udelay(10);
 217
 218                                 command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 219
 220                                 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 221                                         break;
 222                         }
 223
 224                         if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 225                                 hw_dbg(hw, "PHY read command didn't complete\n");
 226                                 status = IXGBE_ERR_PHY;
 227                         } else {
 228                                 /*
 229                                  * Read operation is complete.  Get the data
 230                                  * from MSRWD
 231                                  */
 232                                 data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
 233                                 data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
 234                                 *phy_data = (u16)(data);
 235                         }
 236                 }
 237
 238                 ixgbe_release_swfw_sync(hw, gssr);
 239         }
 240
 241         return status;
 242 }
 243
 244 /**
 245  *  ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
 246  *  @hw: pointer to hardware structure
 247  *  @reg_addr: 32 bit PHY register to write
 248  *  @device_type: 5 bit device type
 249  *  @phy_data: Data to write to the PHY register
 250  **/
 251 s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 252                                 u32 device_type, u16 phy_data)
 253 {
 254         u32 command;
 255         u32 i;
 256         s32 status = 0;
 257         u16 gssr;
 258
 259         if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
 260                 gssr = IXGBE_GSSR_PHY1_SM;
 261         else
 262                 gssr = IXGBE_GSSR_PHY0_SM;
 263
 264         if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
 265                 status = IXGBE_ERR_SWFW_SYNC;
 266
 267         if (status == 0) {
 268                 /* Put the data in the MDI single read and write data register*/
 269                 IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
 270
 271                 /* Setup and write the address cycle command */
 272                 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 273                            (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 274                            (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 275                            (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 276
 277                 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 278
 279                 /*
 280                  * Check every 10 usec to see if the address cycle completed.
 281                  * The MDI Command bit will clear when the operation is
 282                  * complete
 283                  */
 284                 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 285                         udelay(10);
 286
 287                         command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 288
 289                         if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 290                                 break;
 291                 }
 292
 293                 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 294                         hw_dbg(hw, "PHY address cmd didn't complete\n");
 295                         status = IXGBE_ERR_PHY;
 296                 }
 297
 298                 if (status == 0) {
 299                         /*
 300                          * Address cycle complete, setup and write the write
 301                          * command
 302                          */
 303                         command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 304                                    (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 305                                    (hw->phy.mdio.prtad <<
 306                                     IXGBE_MSCA_PHY_ADDR_SHIFT) |
 307                                    (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
 308
 309                         IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 310
 311                         /*
 312                          * Check every 10 usec to see if the address cycle
 313                          * completed. The MDI Command bit will clear when the
 314                          * operation is complete
 315                          */
 316                         for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 317                                 udelay(10);
 318
 319                                 command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 320
 321                                 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 322                                         break;
 323                         }
 324
 325                         if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 326                                 hw_dbg(hw, "PHY address cmd didn't complete\n");
 327                                 status = IXGBE_ERR_PHY;
 328                         }
 329                 }
 330
 331                 ixgbe_release_swfw_sync(hw, gssr);
 332         }
 333
 334         return status;
 335 }
 336
 337 /**
 338  *  ixgbe_setup_phy_link_generic - Set and restart autoneg
 339  *  @hw: pointer to hardware structure
 340  *
 341  *  Restart autonegotiation and PHY and waits for completion.
 342  **/
 343 s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 344 {
 345         s32 status = IXGBE_NOT_IMPLEMENTED;
 346         u32 time_out;
 347         u32 max_time_out = 10;
 348         u16 autoneg_reg;
 349
 350         /*
 351          * Set advertisement settings in PHY based on autoneg_advertised
 352          * settings. If autoneg_advertised = 0, then advertise default values
 353          * tnx devices cannot be "forced" to a autoneg 10G and fail.  But can
 354          * for a 1G.
 355          */
 356         hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg);
 357
 358         if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
 359                 autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
 360         else
 361                 autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
 362
 363         hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg);
 364
 365         /* Restart PHY autonegotiation and wait for completion */
 366         hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg);
 367
 368         autoneg_reg |= MDIO_AN_CTRL1_RESTART;
 369
 370         hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg);
 371
 372         /* Wait for autonegotiation to finish */
 373         for (time_out = 0; time_out < max_time_out; time_out++) {
 374                 udelay(10);
 375                 /* Restart PHY autonegotiation and wait for completion */
 376                 status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 377                                               &autoneg_reg);
 378
 379                 autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
 380                 if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) {
 381                         status = 0;
 382                         break;
 383                 }
 384         }
 385
 386         if (time_out == max_time_out)
 387                 status = IXGBE_ERR_LINK_SETUP;
 388
 389         return status;
 390 }
 391
 392 /**
 393  *  ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
 394  *  @hw: pointer to hardware structure
 395  *  @speed: new link speed
 396  *  @autoneg: true if autonegotiation enabled
 397  **/
 398 s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 399                                        ixgbe_link_speed speed,
 400                                        bool autoneg,
 401                                        bool autoneg_wait_to_complete)
 402 {
 403
 404         /*
 405          * Clear autoneg_advertised and set new values based on input link
 406          * speed.
 407          */
 408         hw->phy.autoneg_advertised = 0;
 409
 410         if (speed & IXGBE_LINK_SPEED_10GB_FULL)
 411                 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
 412
 413         if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 414                 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
 415
 416         /* Setup link based on the new speed settings */
 417         hw->phy.ops.setup_link(hw);
 418
 419         return 0;
 420 }
 421
 422 /**
 423  *  ixgbe_reset_phy_nl - Performs a PHY reset
 424  *  @hw: pointer to hardware structure
 425  **/
 426 s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 427 {
 428         u16 phy_offset, control, eword, edata, block_crc;
 429         bool end_data = false;
 430         u16 list_offset, data_offset;
 431         u16 phy_data = 0;
 432         s32 ret_val = 0;
 433         u32 i;
 434
 435         hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data);
 436
 437         /* reset the PHY and poll for completion */
 438         hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
 439                               (phy_data | MDIO_CTRL1_RESET));
 440
 441         for (i = 0; i < 100; i++) {
 442                 hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
 443                                      &phy_data);
 444                 if ((phy_data & MDIO_CTRL1_RESET) == 0)
 445                         break;
 446                 msleep(10);
 447         }
 448
 449         if ((phy_data & MDIO_CTRL1_RESET) != 0) {
 450                 hw_dbg(hw, "PHY reset did not complete.\n");
 451                 ret_val = IXGBE_ERR_PHY;
 452                 goto out;
 453         }
 454
 455         /* Get init offsets */
 456         ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
 457                                                       &data_offset);
 458         if (ret_val != 0)
 459                 goto out;
 460
 461         ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
 462         data_offset++;
 463         while (!end_data) {
 464                 /*
 465                  * Read control word from PHY init contents offset
 466                  */
 467                 ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
 468                 control = (eword & IXGBE_CONTROL_MASK_NL) >>
 469                            IXGBE_CONTROL_SHIFT_NL;
 470                 edata = eword & IXGBE_DATA_MASK_NL;
 471                 switch (control) {
 472                 case IXGBE_DELAY_NL:
 473                         data_offset++;
 474                         hw_dbg(hw, "DELAY: %d MS\n", edata);
 475                         msleep(edata);
 476                         break;
 477                 case IXGBE_DATA_NL:
 478                         hw_dbg(hw, "DATA:  \n");
 479                         data_offset++;
 480                         hw->eeprom.ops.read(hw, data_offset++,
 481                                             &phy_offset);
 482                         for (i = 0; i < edata; i++) {
 483                                 hw->eeprom.ops.read(hw, data_offset, &eword);
 484                                 hw->phy.ops.write_reg(hw, phy_offset,
 485                                                       MDIO_MMD_PMAPMD, eword);
 486                                 hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
 487                                        phy_offset);
 488                                 data_offset++;
 489                                 phy_offset++;
 490                         }
 491                         break;
 492                 case IXGBE_CONTROL_NL:
 493                         data_offset++;
 494                         hw_dbg(hw, "CONTROL: \n");
 495                         if (edata == IXGBE_CONTROL_EOL_NL) {
 496                                 hw_dbg(hw, "EOL\n");
 497                                 end_data = true;
 498                         } else if (edata == IXGBE_CONTROL_SOL_NL) {
 499                                 hw_dbg(hw, "SOL\n");
 500                         } else {
 501                                 hw_dbg(hw, "Bad control value\n");
 502                                 ret_val = IXGBE_ERR_PHY;
 503                                 goto out;
 504                         }
 505                         break;
 506                 default:
 507                         hw_dbg(hw, "Bad control type\n");
 508                         ret_val = IXGBE_ERR_PHY;
 509                         goto out;
 510                 }
 511         }
 512
 513 out:
 514         return ret_val;
 515 }
 516
 517 /**
 518  *  ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns
 519  *                                      the PHY type.
 520  *  @hw: pointer to hardware structure
 521  *
 522  *  Searches for and indentifies the SFP module.  Assings appropriate PHY type.
 523  **/
 524 s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 525 {
 526         s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 527         u32 vendor_oui = 0;
 528         enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
 529         u8 identifier = 0;
 530         u8 comp_codes_1g = 0;
 531         u8 comp_codes_10g = 0;
 532         u8 oui_bytes[3] = {0, 0, 0};
 533         u8 cable_tech = 0;
 534         u16 enforce_sfp = 0;
 535
 536         if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
 537                 hw->phy.sfp_type = ixgbe_sfp_type_not_present;
 538                 status = IXGBE_ERR_SFP_NOT_PRESENT;
 539                 goto out;
 540         }
 541
 542         status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
 543                                              &identifier);
 544
 545         if (status == IXGBE_ERR_SFP_NOT_PRESENT || status == IXGBE_ERR_I2C) {
 546                 status = IXGBE_ERR_SFP_NOT_PRESENT;
 547                 hw->phy.sfp_type = ixgbe_sfp_type_not_present;
 548                 if (hw->phy.type != ixgbe_phy_nl) {
 549                         hw->phy.id = 0;
 550                         hw->phy.type = ixgbe_phy_unknown;
 551                 }
 552                 goto out;
 553         }
 554
 555         if (identifier == IXGBE_SFF_IDENTIFIER_SFP) {
 556                 hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES,
 557                                             &comp_codes_1g);
 558                 hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
 559                                             &comp_codes_10g);
 560                 hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY,
 561                                             &cable_tech);
 562
 563                 /* ID Module
 564                  * =========
 565                  * 0    SFP_DA_CU
 566                  * 1    SFP_SR
 567                  * 2    SFP_LR
 568                  * 3    SFP_DA_CORE0 - 82599-specific
 569                  * 4    SFP_DA_CORE1 - 82599-specific
 570                  * 5    SFP_SR/LR_CORE0 - 82599-specific
 571                  * 6    SFP_SR/LR_CORE1 - 82599-specific
 572                  */
 573                 if (hw->mac.type == ixgbe_mac_82598EB) {
 574                         if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 575                                 hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
 576                         else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 577                                 hw->phy.sfp_type = ixgbe_sfp_type_sr;
 578                         else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
 579                                 hw->phy.sfp_type = ixgbe_sfp_type_lr;
 580                         else
 581                                 hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 582                 } else if (hw->mac.type == ixgbe_mac_82599EB) {
 583                         if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 584                                 if (hw->bus.lan_id == 0)
 585                                         hw->phy.sfp_type =
 586                                                      ixgbe_sfp_type_da_cu_core0;
 587                                 else
 588                                         hw->phy.sfp_type =
 589                                                      ixgbe_sfp_type_da_cu_core1;
 590                         else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 591                                 if (hw->bus.lan_id == 0)
 592                                         hw->phy.sfp_type =
 593                                                       ixgbe_sfp_type_srlr_core0;
 594                                 else
 595                                         hw->phy.sfp_type =
 596                                                       ixgbe_sfp_type_srlr_core1;
 597                         else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
 598                                 if (hw->bus.lan_id == 0)
 599                                         hw->phy.sfp_type =
 600                                                       ixgbe_sfp_type_srlr_core0;
 601                                 else
 602                                         hw->phy.sfp_type =
 603                                                       ixgbe_sfp_type_srlr_core1;
 604                         else
 605                                 hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 606                 }
 607
 608                 if (hw->phy.sfp_type != stored_sfp_type)
 609                         hw->phy.sfp_setup_needed = true;
 610
 611                 /* Determine if the SFP+ PHY is dual speed or not. */
 612                 hw->phy.multispeed_fiber = false;
 613                 if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
 614                    (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
 615                    ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
 616                    (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
 617                         hw->phy.multispeed_fiber = true;
 618
 619                 /* Determine PHY vendor */
 620                 if (hw->phy.type != ixgbe_phy_nl) {
 621                         hw->phy.id = identifier;
 622                         hw->phy.ops.read_i2c_eeprom(hw,
 623                                                     IXGBE_SFF_VENDOR_OUI_BYTE0,
 624                                                     &oui_bytes[0]);
 625                         hw->phy.ops.read_i2c_eeprom(hw,
 626                                                     IXGBE_SFF_VENDOR_OUI_BYTE1,
 627                                                     &oui_bytes[1]);
 628                         hw->phy.ops.read_i2c_eeprom(hw,
 629                                                     IXGBE_SFF_VENDOR_OUI_BYTE2,
 630                                                     &oui_bytes[2]);
 631
 632                         vendor_oui =
 633                           ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
 634                            (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
 635                            (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
 636
 637                         switch (vendor_oui) {
 638                         case IXGBE_SFF_VENDOR_OUI_TYCO:
 639                                 if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 640                                         hw->phy.type = ixgbe_phy_tw_tyco;
 641                                 break;
 642                         case IXGBE_SFF_VENDOR_OUI_FTL:
 643                                 hw->phy.type = ixgbe_phy_sfp_ftl;
 644                                 break;
 645                         case IXGBE_SFF_VENDOR_OUI_AVAGO:
 646                                 hw->phy.type = ixgbe_phy_sfp_avago;
 647                                 break;
 648                         case IXGBE_SFF_VENDOR_OUI_INTEL:
 649                                 hw->phy.type = ixgbe_phy_sfp_intel;
 650                                 break;
 651                         default:
 652                                 if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 653                                         hw->phy.type = ixgbe_phy_tw_unknown;
 654                                 else
 655                                         hw->phy.type = ixgbe_phy_sfp_unknown;
 656                                 break;
 657                         }
 658                 }
 659
 660                 /* All passive DA cables are supported */
 661                 if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
 662                         status = 0;
 663                         goto out;
 664                 }
 665
 666                 /* 1G SFP modules are not supported */
 667                 if (comp_codes_10g == 0) {
 668                         hw->phy.type = ixgbe_phy_sfp_unsupported;
 669                         status = IXGBE_ERR_SFP_NOT_SUPPORTED;
 670                         goto out;
 671                 }
 672
 673                 /* Anything else 82598-based is supported */
 674                 if (hw->mac.type == ixgbe_mac_82598EB) {
 675                         status = 0;
 676                         goto out;
 677                 }
 678
 679                 /* This is guaranteed to be 82599, no need to check for NULL */
 680                 hw->mac.ops.get_device_caps(hw, &enforce_sfp);
 681                 if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
 682                         /* Make sure we're a supported PHY type */
 683                         if (hw->phy.type == ixgbe_phy_sfp_intel) {
 684                                 status = 0;
 685                         } else {
 686                                 hw_dbg(hw, "SFP+ module not supported\n");
 687                                 hw->phy.type = ixgbe_phy_sfp_unsupported;
 688                                 status = IXGBE_ERR_SFP_NOT_SUPPORTED;
 689                         }
 690                 } else {
 691                         status = 0;
 692                 }
 693         }
 694
 695 out:
 696         return status;
 697 }
 698
 699 /**
 700  *  ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see
 701  *  if it supports a given SFP+ module type, if so it returns the offsets to the
 702  *  phy init sequence block.
 703  *  @hw: pointer to hardware structure
 704  *  @list_offset: offset to the SFP ID list
 705  *  @data_offset: offset to the SFP data block
 706  **/
 707 s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 708                                         u16 *list_offset,
 709                                         u16 *data_offset)
 710 {
 711         u16 sfp_id;
 712
 713         if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
 714                 return IXGBE_ERR_SFP_NOT_SUPPORTED;
 715
 716         if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
 717                 return IXGBE_ERR_SFP_NOT_PRESENT;
 718
 719         if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
 720             (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
 721                 return IXGBE_ERR_SFP_NOT_SUPPORTED;
 722
 723         /* Read offset to PHY init contents */
 724         hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
 725
 726         if ((!*list_offset) || (*list_offset == 0xFFFF))
 727                 return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
 728
 729         /* Shift offset to first ID word */
 730         (*list_offset)++;
 731
 732         /*
 733          * Find the matching SFP ID in the EEPROM
 734          * and program the init sequence
 735          */
 736         hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
 737
 738         while (sfp_id != IXGBE_PHY_INIT_END_NL) {
 739                 if (sfp_id == hw->phy.sfp_type) {
 740                         (*list_offset)++;
 741                         hw->eeprom.ops.read(hw, *list_offset, data_offset);
 742                         if ((!*data_offset) || (*data_offset == 0xFFFF)) {
 743                                 hw_dbg(hw, "SFP+ module not supported\n");
 744                                 return IXGBE_ERR_SFP_NOT_SUPPORTED;
 745                         } else {
 746                                 break;
 747                         }
 748                 } else {
 749                         (*list_offset) += 2;
 750                         if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
 751                                 return IXGBE_ERR_PHY;
 752                 }
 753         }
 754
 755         if (sfp_id == IXGBE_PHY_INIT_END_NL) {
 756                 hw_dbg(hw, "No matching SFP+ module found\n");
 757                 return IXGBE_ERR_SFP_NOT_SUPPORTED;
 758         }
 759
 760         return 0;
 761 }
 762
 763 /**
 764  *  ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
 765  *  @hw: pointer to hardware structure
 766  *  @byte_offset: EEPROM byte offset to read
 767  *  @eeprom_data: value read
 768  *
 769  *  Performs byte read operation to SFP module's EEPROM over I2C interface.
 770  **/
 771 s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
 772                                   u8 *eeprom_data)
 773 {
 774         return hw->phy.ops.read_i2c_byte(hw, byte_offset,
 775                                          IXGBE_I2C_EEPROM_DEV_ADDR,
 776                                          eeprom_data);
 777 }
 778
 779 /**
 780  *  ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
 781  *  @hw: pointer to hardware structure
 782  *  @byte_offset: EEPROM byte offset to write
 783  *  @eeprom_data: value to write
 784  *
 785  *  Performs byte write operation to SFP module's EEPROM over I2C interface.
 786  **/
 787 s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
 788                                    u8 eeprom_data)
 789 {
 790         return hw->phy.ops.write_i2c_byte(hw, byte_offset,
 791                                           IXGBE_I2C_EEPROM_DEV_ADDR,
 792                                           eeprom_data);
 793 }
 794
 795 /**
 796  *  ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
 797  *  @hw: pointer to hardware structure
 798  *  @byte_offset: byte offset to read
 799  *  @data: value read
 800  *
 801  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
 802  *  a specified deivce address.
 803  **/
 804 s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
 805                                 u8 dev_addr, u8 *data)
 806 {
 807         s32 status = 0;
 808         u32 max_retry = 1;
 809         u32 retry = 0;
 810         bool nack = 1;
 811
 812         do {
 813                 ixgbe_i2c_start(hw);
 814
 815                 /* Device Address and write indication */
 816                 status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
 817                 if (status != 0)
 818                         goto fail;
 819
 820                 status = ixgbe_get_i2c_ack(hw);
 821                 if (status != 0)
 822                         goto fail;
 823
 824                 status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
 825                 if (status != 0)
 826                         goto fail;
 827
 828                 status = ixgbe_get_i2c_ack(hw);
 829                 if (status != 0)
 830                         goto fail;
 831
 832                 ixgbe_i2c_start(hw);
 833
 834                 /* Device Address and read indication */
 835                 status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
 836                 if (status != 0)
 837                         goto fail;
 838
 839                 status = ixgbe_get_i2c_ack(hw);
 840                 if (status != 0)
 841                         goto fail;
 842
 843                 status = ixgbe_clock_in_i2c_byte(hw, data);
 844                 if (status != 0)
 845                         goto fail;
 846
 847                 status = ixgbe_clock_out_i2c_bit(hw, nack);
 848                 if (status != 0)
 849                         goto fail;
 850
 851                 ixgbe_i2c_stop(hw);
 852                 break;
 853
 854 fail:
 855                 ixgbe_i2c_bus_clear(hw);
 856                 retry++;
 857                 if (retry < max_retry)
 858                         hw_dbg(hw, "I2C byte read error - Retrying.\n");
 859                 else
 860                         hw_dbg(hw, "I2C byte read error.\n");
 861
 862         } while (retry < max_retry);
 863
 864         return status;
 865 }
 866
 867 /**
 868  *  ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
 869  *  @hw: pointer to hardware structure
 870  *  @byte_offset: byte offset to write
 871  *  @data: value to write
 872  *
 873  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
 874  *  a specified device address.
 875  **/
 876 s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
 877                                  u8 dev_addr, u8 data)
 878 {
 879         s32 status = 0;
 880         u32 max_retry = 1;
 881         u32 retry = 0;
 882
 883         do {
 884                 ixgbe_i2c_start(hw);
 885
 886                 status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
 887                 if (status != 0)
 888                         goto fail;
 889
 890                 status = ixgbe_get_i2c_ack(hw);
 891                 if (status != 0)
 892                         goto fail;
 893
 894                 status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
 895                 if (status != 0)
 896                         goto fail;
 897
 898                 status = ixgbe_get_i2c_ack(hw);
 899                 if (status != 0)
 900                         goto fail;
 901
 902                 status = ixgbe_clock_out_i2c_byte(hw, data);
 903                 if (status != 0)
 904                         goto fail;
 905
 906                 status = ixgbe_get_i2c_ack(hw);
 907                 if (status != 0)
 908                         goto fail;
 909
 910                 ixgbe_i2c_stop(hw);
 911                 break;
 912
 913 fail:
 914                 ixgbe_i2c_bus_clear(hw);
 915                 retry++;
 916                 if (retry < max_retry)
 917                         hw_dbg(hw, "I2C byte write error - Retrying.\n");
 918                 else
 919                         hw_dbg(hw, "I2C byte write error.\n");
 920         } while (retry < max_retry);
 921
 922         return status;
 923 }
 924
 925 /**
 926  *  ixgbe_i2c_start - Sets I2C start condition
 927  *  @hw: pointer to hardware structure
 928  *
 929  *  Sets I2C start condition (High -> Low on SDA while SCL is High)
 930  **/
 931 static void ixgbe_i2c_start(struct ixgbe_hw *hw)
 932 {
 933         u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
 934
 935         /* Start condition must begin with data and clock high */
 936         ixgbe_set_i2c_data(hw, &i2cctl, 1);
 937         ixgbe_raise_i2c_clk(hw, &i2cctl);
 938
 939         /* Setup time for start condition (4.7us) */
 940         udelay(IXGBE_I2C_T_SU_STA);
 941
 942         ixgbe_set_i2c_data(hw, &i2cctl, 0);
 943
 944         /* Hold time for start condition (4us) */
 945         udelay(IXGBE_I2C_T_HD_STA);
 946
 947         ixgbe_lower_i2c_clk(hw, &i2cctl);
 948
 949         /* Minimum low period of clock is 4.7 us */
 950         udelay(IXGBE_I2C_T_LOW);
 951
 952 }
 953
 954 /**
 955  *  ixgbe_i2c_stop - Sets I2C stop condition
 956  *  @hw: pointer to hardware structure
 957  *
 958  *  Sets I2C stop condition (Low -> High on SDA while SCL is High)
 959  **/
 960 static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
 961 {
 962         u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
 963
 964         /* Stop condition must begin with data low and clock high */
 965         ixgbe_set_i2c_data(hw, &i2cctl, 0);
 966         ixgbe_raise_i2c_clk(hw, &i2cctl);
 967
 968         /* Setup time for stop condition (4us) */
 969         udelay(IXGBE_I2C_T_SU_STO);
 970
 971         ixgbe_set_i2c_data(hw, &i2cctl, 1);
 972
 973         /* bus free time between stop and start (4.7us)*/
 974         udelay(IXGBE_I2C_T_BUF);
 975 }
 976
 977 /**
 978  *  ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
 979  *  @hw: pointer to hardware structure
 980  *  @data: data byte to clock in
 981  *
 982  *  Clocks in one byte data via I2C data/clock
 983  **/
 984 static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
 985 {
 986         s32 status = 0;
 987         s32 i;
 988         bool bit = 0;
 989
 990         for (i = 7; i >= 0; i--) {
 991                 status = ixgbe_clock_in_i2c_bit(hw, &bit);
 992                 *data |= bit << i;
 993
 994                 if (status != 0)
 995                         break;
 996         }
 997
 998         return status;
 999 }
1000
1001 /**
1002  *  ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
1003  *  @hw: pointer to hardware structure
1004  *  @data: data byte clocked out
1005  *
1006  *  Clocks out one byte data via I2C data/clock
1007  **/
1008 static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
1009 {
1010         s32 status = 0;
1011         s32 i;
1012         u32 i2cctl;
1013         bool bit = 0;
1014
1015         for (i = 7; i >= 0; i--) {
1016                 bit = (data >> i) & 0x1;
1017                 status = ixgbe_clock_out_i2c_bit(hw, bit);
1018
1019                 if (status != 0)
1020                         break;
1021         }
1022
1023         /* Release SDA line (set high) */
1024         i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1025         i2cctl |= IXGBE_I2C_DATA_OUT;
1026         IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl);
1027
1028         return status;
1029 }
1030
1031 /**
1032  *  ixgbe_get_i2c_ack - Polls for I2C ACK
1033  *  @hw: pointer to hardware structure
1034  *
1035  *  Clocks in/out one bit via I2C data/clock
1036  **/
1037 static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
1038 {
1039         s32 status;
1040         u32 i = 0;
1041         u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1042         u32 timeout = 10;
1043         bool ack = 1;
1044
1045         status = ixgbe_raise_i2c_clk(hw, &i2cctl);
1046
1047         if (status != 0)
1048                 goto out;
1049
1050         /* Minimum high period of clock is 4us */
1051         udelay(IXGBE_I2C_T_HIGH);
1052
1053         /* Poll for ACK.  Note that ACK in I2C spec is
1054          * transition from 1 to 0 */
1055         for (i = 0; i < timeout; i++) {
1056                 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1057                 ack = ixgbe_get_i2c_data(&i2cctl);
1058
1059                 udelay(1);
1060                 if (ack == 0)
1061                         break;
1062         }
1063
1064         if (ack == 1) {
1065                 hw_dbg(hw, "I2C ack was not received.\n");
1066                 status = IXGBE_ERR_I2C;
1067         }
1068
1069         ixgbe_lower_i2c_clk(hw, &i2cctl);
1070
1071         /* Minimum low period of clock is 4.7 us */
1072         udelay(IXGBE_I2C_T_LOW);
1073
1074 out:
1075         return status;
1076 }
1077
1078 /**
1079  *  ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
1080  *  @hw: pointer to hardware structure
1081  *  @data: read data value
1082  *
1083  *  Clocks in one bit via I2C data/clock
1084  **/
1085 static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
1086 {
1087         s32 status;
1088         u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1089
1090         status = ixgbe_raise_i2c_clk(hw, &i2cctl);
1091
1092         /* Minimum high period of clock is 4us */
1093         udelay(IXGBE_I2C_T_HIGH);
1094
1095         i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1096         *data = ixgbe_get_i2c_data(&i2cctl);
1097
1098         ixgbe_lower_i2c_clk(hw, &i2cctl);
1099
1100         /* Minimum low period of clock is 4.7 us */
1101         udelay(IXGBE_I2C_T_LOW);
1102
1103         return status;
1104 }
1105
1106 /**
1107  *  ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
1108  *  @hw: pointer to hardware structure
1109  *  @data: data value to write
1110  *
1111  *  Clocks out one bit via I2C data/clock
1112  **/
1113 static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
1114 {
1115         s32 status;
1116         u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1117
1118         status = ixgbe_set_i2c_data(hw, &i2cctl, data);
1119         if (status == 0) {
1120                 status = ixgbe_raise_i2c_clk(hw, &i2cctl);
1121
1122                 /* Minimum high period of clock is 4us */
1123                 udelay(IXGBE_I2C_T_HIGH);
1124
1125                 ixgbe_lower_i2c_clk(hw, &i2cctl);
1126
1127                 /* Minimum low period of clock is 4.7 us.
1128                  * This also takes care of the data hold time.
1129                  */
1130                 udelay(IXGBE_I2C_T_LOW);
1131         } else {
1132                 status = IXGBE_ERR_I2C;
1133                 hw_dbg(hw, "I2C data was not set to %X\n", data);
1134         }
1135
1136         return status;
1137 }
1138 /**
1139  *  ixgbe_raise_i2c_clk - Raises the I2C SCL clock
1140  *  @hw: pointer to hardware structure
1141  *  @i2cctl: Current value of I2CCTL register
1142  *
1143  *  Raises the I2C clock line '0'->'1'
1144  **/
1145 static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
1146 {
1147         s32 status = 0;
1148
1149         *i2cctl |= IXGBE_I2C_CLK_OUT;
1150
1151         IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
1152
1153         /* SCL rise time (1000ns) */
1154         udelay(IXGBE_I2C_T_RISE);
1155
1156         return status;
1157 }
1158
1159 /**
1160  *  ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
1161  *  @hw: pointer to hardware structure
1162  *  @i2cctl: Current value of I2CCTL register
1163  *
1164  *  Lowers the I2C clock line '1'->'0'
1165  **/
1166 static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
1167 {
1168
1169         *i2cctl &= ~IXGBE_I2C_CLK_OUT;
1170
1171         IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
1172
1173         /* SCL fall time (300ns) */
1174         udelay(IXGBE_I2C_T_FALL);
1175 }
1176
1177 /**
1178  *  ixgbe_set_i2c_data - Sets the I2C data bit
1179  *  @hw: pointer to hardware structure
1180  *  @i2cctl: Current value of I2CCTL register
1181  *  @data: I2C data value (0 or 1) to set
1182  *
1183  *  Sets the I2C data bit
1184  **/
1185 static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
1186 {
1187         s32 status = 0;
1188
1189         if (data)
1190                 *i2cctl |= IXGBE_I2C_DATA_OUT;
1191         else
1192                 *i2cctl &= ~IXGBE_I2C_DATA_OUT;
1193
1194         IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
1195
1196         /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
1197         udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
1198
1199         /* Verify data was set correctly */
1200         *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1201         if (data != ixgbe_get_i2c_data(i2cctl)) {
1202                 status = IXGBE_ERR_I2C;
1203                 hw_dbg(hw, "Error - I2C data was not set to %X.\n", data);
1204         }
1205
1206         return status;
1207 }
1208
1209 /**
1210  *  ixgbe_get_i2c_data - Reads the I2C SDA data bit
1211  *  @hw: pointer to hardware structure
1212  *  @i2cctl: Current value of I2CCTL register
1213  *
1214  *  Returns the I2C data bit value
1215  **/
1216 static bool ixgbe_get_i2c_data(u32 *i2cctl)
1217 {
1218         bool data;
1219
1220         if (*i2cctl & IXGBE_I2C_DATA_IN)
1221                 data = 1;
1222         else
1223                 data = 0;
1224
1225         return data;
1226 }
1227
1228 /**
1229  *  ixgbe_i2c_bus_clear - Clears the I2C bus
1230  *  @hw: pointer to hardware structure
1231  *
1232  *  Clears the I2C bus by sending nine clock pulses.
1233  *  Used when data line is stuck low.
1234  **/
1235 static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
1236 {
1237         u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
1238         u32 i;
1239
1240         ixgbe_set_i2c_data(hw, &i2cctl, 1);
1241
1242         for (i = 0; i < 9; i++) {
1243                 ixgbe_raise_i2c_clk(hw, &i2cctl);
1244
1245                 /* Min high period of clock is 4us */
1246                 udelay(IXGBE_I2C_T_HIGH);
1247
1248                 ixgbe_lower_i2c_clk(hw, &i2cctl);
1249
1250                 /* Min low period of clock is 4.7us*/
1251                 udelay(IXGBE_I2C_T_LOW);
1252         }
1253
1254         /* Put the i2c bus back to default state */
1255         ixgbe_i2c_stop(hw);
1256 }
1257
1258 /**
1259  *  ixgbe_check_phy_link_tnx - Determine link and speed status
1260  *  @hw: pointer to hardware structure
1261  *
1262  *  Reads the VS1 register to determine if link is up and the current speed for
1263  *  the PHY.
1264  **/
1265 s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
1266                              bool *link_up)
1267 {
1268         s32 status = 0;
1269         u32 time_out;
1270         u32 max_time_out = 10;
1271         u16 phy_link = 0;
1272         u16 phy_speed = 0;
1273         u16 phy_data = 0;
1274
1275         /* Initialize speed and link to default case */
1276         *link_up = false;
1277         *speed = IXGBE_LINK_SPEED_10GB_FULL;
1278
1279         /*
1280          * Check current speed and link status of the PHY register.
1281          * This is a vendor specific register and may have to
1282          * be changed for other copper PHYs.
1283          */
1284         for (time_out = 0; time_out < max_time_out; time_out++) {
1285                 udelay(10);
1286                 status = hw->phy.ops.read_reg(hw,
1287                                         IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
1288                                         MDIO_MMD_VEND1,
1289                                         &phy_data);
1290                 phy_link = phy_data &
1291                            IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
1292                 phy_speed = phy_data &
1293                             IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
1294                 if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
1295                         *link_up = true;
1296                         if (phy_speed ==
1297                             IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
1298                                 *speed = IXGBE_LINK_SPEED_1GB_FULL;
1299                         break;
1300                 }
1301         }
1302
1303         return status;
1304 }
1305
1306 /**
1307  *  ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
1308  *  @hw: pointer to hardware structure
1309  *  @firmware_version: pointer to the PHY Firmware Version
1310  **/
1311 s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
1312                                        u16 *firmware_version)
1313 {
1314         s32 status = 0;
1315
1316         status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1,
1317                                       firmware_version);
1318
1319         return status;
1320 }
1321