git.oblomov.eu Git - linux-2.6/blob - drivers/spi/pxa2xx_spi.c

   1 /*
   2  * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 #include <linux/init.h>
  20 #include <linux/module.h>
  21 #include <linux/device.h>
  22 #include <linux/ioport.h>
  23 #include <linux/errno.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/dma-mapping.h>
  27 #include <linux/spi/spi.h>
  28 #include <linux/workqueue.h>
  29 #include <linux/delay.h>
  30 #include <linux/clk.h>
  31
  32 #include <asm/io.h>
  33 #include <asm/irq.h>
  34 #include <asm/hardware.h>
  35 #include <asm/delay.h>
  36 #include <asm/dma.h>
  37
  38 #include <asm/arch/hardware.h>
  39 #include <asm/arch/pxa-regs.h>
  40 #include <asm/arch/regs-ssp.h>
  41 #include <asm/arch/ssp.h>
  42 #include <asm/arch/pxa2xx_spi.h>
  43
  44 MODULE_AUTHOR("Stephen Street");
  45 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
  46 MODULE_LICENSE("GPL");
  47
  48 #define MAX_BUSES 3
  49
  50 #define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
  51 #define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
  52 #define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
  53
  54 /* for testing SSCR1 changes that require SSP restart, basically
  55  * everything except the service and interrupt enables */
  56 #define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_EBCEI | SSCR1_SCFR \
  57                                 | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
  58                                 | SSCR1_RWOT | SSCR1_TRAIL | SSCR1_PINTE \
  59                                 | SSCR1_STRF | SSCR1_EFWR |SSCR1_RFT \
  60                                 | SSCR1_TFT | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
  61
  62 #define DEFINE_SSP_REG(reg, off) \
  63 static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
  64 static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
  65
  66 DEFINE_SSP_REG(SSCR0, 0x00)
  67 DEFINE_SSP_REG(SSCR1, 0x04)
  68 DEFINE_SSP_REG(SSSR, 0x08)
  69 DEFINE_SSP_REG(SSITR, 0x0c)
  70 DEFINE_SSP_REG(SSDR, 0x10)
  71 DEFINE_SSP_REG(SSTO, 0x28)
  72 DEFINE_SSP_REG(SSPSP, 0x2c)
  73
  74 #define START_STATE ((void*)0)
  75 #define RUNNING_STATE ((void*)1)
  76 #define DONE_STATE ((void*)2)
  77 #define ERROR_STATE ((void*)-1)
  78
  79 #define QUEUE_RUNNING 0
  80 #define QUEUE_STOPPED 1
  81
  82 struct driver_data {
  83         /* Driver model hookup */
  84         struct platform_device *pdev;
  85
  86         /* SSP Info */
  87         struct ssp_device *ssp;
  88
  89         /* SPI framework hookup */
  90         enum pxa_ssp_type ssp_type;
  91         struct spi_master *master;
  92
  93         /* PXA hookup */
  94         struct pxa2xx_spi_master *master_info;
  95
  96         /* DMA setup stuff */
  97         int rx_channel;
  98         int tx_channel;
  99         u32 *null_dma_buf;
 100
 101         /* SSP register addresses */
 102         void *ioaddr;
 103         u32 ssdr_physical;
 104
 105         /* SSP masks*/
 106         u32 dma_cr1;
 107         u32 int_cr1;
 108         u32 clear_sr;
 109         u32 mask_sr;
 110
 111         /* Driver message queue */
 112         struct workqueue_struct *workqueue;
 113         struct work_struct pump_messages;
 114         spinlock_t lock;
 115         struct list_head queue;
 116         int busy;
 117         int run;
 118
 119         /* Message Transfer pump */
 120         struct tasklet_struct pump_transfers;
 121
 122         /* Current message transfer state info */
 123         struct spi_message* cur_msg;
 124         struct spi_transfer* cur_transfer;
 125         struct chip_data *cur_chip;
 126         size_t len;
 127         void *tx;
 128         void *tx_end;
 129         void *rx;
 130         void *rx_end;
 131         int dma_mapped;
 132         dma_addr_t rx_dma;
 133         dma_addr_t tx_dma;
 134         size_t rx_map_len;
 135         size_t tx_map_len;
 136         u8 n_bytes;
 137         u32 dma_width;
 138         int cs_change;
 139         int (*write)(struct driver_data *drv_data);
 140         int (*read)(struct driver_data *drv_data);
 141         irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
 142         void (*cs_control)(u32 command);
 143 };
 144
 145 struct chip_data {
 146         u32 cr0;
 147         u32 cr1;
 148         u32 psp;
 149         u32 timeout;
 150         u8 n_bytes;
 151         u32 dma_width;
 152         u32 dma_burst_size;
 153         u32 threshold;
 154         u32 dma_threshold;
 155         u8 enable_dma;
 156         u8 bits_per_word;
 157         u32 speed_hz;
 158         int (*write)(struct driver_data *drv_data);
 159         int (*read)(struct driver_data *drv_data);
 160         void (*cs_control)(u32 command);
 161 };
 162
 163 static void pump_messages(struct work_struct *work);
 164
 165 static int flush(struct driver_data *drv_data)
 166 {
 167         unsigned long limit = loops_per_jiffy << 1;
 168
 169         void *reg = drv_data->ioaddr;
 170
 171         do {
 172                 while (read_SSSR(reg) & SSSR_RNE) {
 173                         read_SSDR(reg);
 174                 }
 175         } while ((read_SSSR(reg) & SSSR_BSY) && limit--);
 176         write_SSSR(SSSR_ROR, reg);
 177
 178         return limit;
 179 }
 180
 181 static void null_cs_control(u32 command)
 182 {
 183 }
 184
 185 static int null_writer(struct driver_data *drv_data)
 186 {
 187         void *reg = drv_data->ioaddr;
 188         u8 n_bytes = drv_data->n_bytes;
 189
 190         if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
 191                 || (drv_data->tx == drv_data->tx_end))
 192                 return 0;
 193
 194         write_SSDR(0, reg);
 195         drv_data->tx += n_bytes;
 196
 197         return 1;
 198 }
 199
 200 static int null_reader(struct driver_data *drv_data)
 201 {
 202         void *reg = drv_data->ioaddr;
 203         u8 n_bytes = drv_data->n_bytes;
 204
 205         while ((read_SSSR(reg) & SSSR_RNE)
 206                 && (drv_data->rx < drv_data->rx_end)) {
 207                 read_SSDR(reg);
 208                 drv_data->rx += n_bytes;
 209         }
 210
 211         return drv_data->rx == drv_data->rx_end;
 212 }
 213
 214 static int u8_writer(struct driver_data *drv_data)
 215 {
 216         void *reg = drv_data->ioaddr;
 217
 218         if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
 219                 || (drv_data->tx == drv_data->tx_end))
 220                 return 0;
 221
 222         write_SSDR(*(u8 *)(drv_data->tx), reg);
 223         ++drv_data->tx;
 224
 225         return 1;
 226 }
 227
 228 static int u8_reader(struct driver_data *drv_data)
 229 {
 230         void *reg = drv_data->ioaddr;
 231
 232         while ((read_SSSR(reg) & SSSR_RNE)
 233                 && (drv_data->rx < drv_data->rx_end)) {
 234                 *(u8 *)(drv_data->rx) = read_SSDR(reg);
 235                 ++drv_data->rx;
 236         }
 237
 238         return drv_data->rx == drv_data->rx_end;
 239 }
 240
 241 static int u16_writer(struct driver_data *drv_data)
 242 {
 243         void *reg = drv_data->ioaddr;
 244
 245         if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
 246                 || (drv_data->tx == drv_data->tx_end))
 247                 return 0;
 248
 249         write_SSDR(*(u16 *)(drv_data->tx), reg);
 250         drv_data->tx += 2;
 251
 252         return 1;
 253 }
 254
 255 static int u16_reader(struct driver_data *drv_data)
 256 {
 257         void *reg = drv_data->ioaddr;
 258
 259         while ((read_SSSR(reg) & SSSR_RNE)
 260                 && (drv_data->rx < drv_data->rx_end)) {
 261                 *(u16 *)(drv_data->rx) = read_SSDR(reg);
 262                 drv_data->rx += 2;
 263         }
 264
 265         return drv_data->rx == drv_data->rx_end;
 266 }
 267
 268 static int u32_writer(struct driver_data *drv_data)
 269 {
 270         void *reg = drv_data->ioaddr;
 271
 272         if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
 273                 || (drv_data->tx == drv_data->tx_end))
 274                 return 0;
 275
 276         write_SSDR(*(u32 *)(drv_data->tx), reg);
 277         drv_data->tx += 4;
 278
 279         return 1;
 280 }
 281
 282 static int u32_reader(struct driver_data *drv_data)
 283 {
 284         void *reg = drv_data->ioaddr;
 285
 286         while ((read_SSSR(reg) & SSSR_RNE)
 287                 && (drv_data->rx < drv_data->rx_end)) {
 288                 *(u32 *)(drv_data->rx) = read_SSDR(reg);
 289                 drv_data->rx += 4;
 290         }
 291
 292         return drv_data->rx == drv_data->rx_end;
 293 }
 294
 295 static void *next_transfer(struct driver_data *drv_data)
 296 {
 297         struct spi_message *msg = drv_data->cur_msg;
 298         struct spi_transfer *trans = drv_data->cur_transfer;
 299
 300         /* Move to next transfer */
 301         if (trans->transfer_list.next != &msg->transfers) {
 302                 drv_data->cur_transfer =
 303                         list_entry(trans->transfer_list.next,
 304                                         struct spi_transfer,
 305                                         transfer_list);
 306                 return RUNNING_STATE;
 307         } else
 308                 return DONE_STATE;
 309 }
 310
 311 static int map_dma_buffers(struct driver_data *drv_data)
 312 {
 313         struct spi_message *msg = drv_data->cur_msg;
 314         struct device *dev = &msg->spi->dev;
 315
 316         if (!drv_data->cur_chip->enable_dma)
 317                 return 0;
 318
 319         if (msg->is_dma_mapped)
 320                 return  drv_data->rx_dma && drv_data->tx_dma;
 321
 322         if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
 323                 return 0;
 324
 325         /* Modify setup if rx buffer is null */
 326         if (drv_data->rx == NULL) {
 327                 *drv_data->null_dma_buf = 0;
 328                 drv_data->rx = drv_data->null_dma_buf;
 329                 drv_data->rx_map_len = 4;
 330         } else
 331                 drv_data->rx_map_len = drv_data->len;
 332
 333
 334         /* Modify setup if tx buffer is null */
 335         if (drv_data->tx == NULL) {
 336                 *drv_data->null_dma_buf = 0;
 337                 drv_data->tx = drv_data->null_dma_buf;
 338                 drv_data->tx_map_len = 4;
 339         } else
 340                 drv_data->tx_map_len = drv_data->len;
 341
 342         /* Stream map the rx buffer */
 343         drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
 344                                                 drv_data->rx_map_len,
 345                                                 DMA_FROM_DEVICE);
 346         if (dma_mapping_error(drv_data->rx_dma))
 347                 return 0;
 348
 349         /* Stream map the tx buffer */
 350         drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
 351                                                 drv_data->tx_map_len,
 352                                                 DMA_TO_DEVICE);
 353
 354         if (dma_mapping_error(drv_data->tx_dma)) {
 355                 dma_unmap_single(dev, drv_data->rx_dma,
 356                                         drv_data->rx_map_len, DMA_FROM_DEVICE);
 357                 return 0;
 358         }
 359
 360         return 1;
 361 }
 362
 363 static void unmap_dma_buffers(struct driver_data *drv_data)
 364 {
 365         struct device *dev;
 366
 367         if (!drv_data->dma_mapped)
 368                 return;
 369
 370         if (!drv_data->cur_msg->is_dma_mapped) {
 371                 dev = &drv_data->cur_msg->spi->dev;
 372                 dma_unmap_single(dev, drv_data->rx_dma,
 373                                         drv_data->rx_map_len, DMA_FROM_DEVICE);
 374                 dma_unmap_single(dev, drv_data->tx_dma,
 375                                         drv_data->tx_map_len, DMA_TO_DEVICE);
 376         }
 377
 378         drv_data->dma_mapped = 0;
 379 }
 380
 381 /* caller already set message->status; dma and pio irqs are blocked */
 382 static void giveback(struct driver_data *drv_data)
 383 {
 384         struct spi_transfer* last_transfer;
 385         unsigned long flags;
 386         struct spi_message *msg;
 387
 388         spin_lock_irqsave(&drv_data->lock, flags);
 389         msg = drv_data->cur_msg;
 390         drv_data->cur_msg = NULL;
 391         drv_data->cur_transfer = NULL;
 392         drv_data->cur_chip = NULL;
 393         queue_work(drv_data->workqueue, &drv_data->pump_messages);
 394         spin_unlock_irqrestore(&drv_data->lock, flags);
 395
 396         last_transfer = list_entry(msg->transfers.prev,
 397                                         struct spi_transfer,
 398                                         transfer_list);
 399
 400         if (!last_transfer->cs_change)
 401                 drv_data->cs_control(PXA2XX_CS_DEASSERT);
 402
 403         msg->state = NULL;
 404         if (msg->complete)
 405                 msg->complete(msg->context);
 406 }
 407
 408 static int wait_ssp_rx_stall(void *ioaddr)
 409 {
 410         unsigned long limit = loops_per_jiffy << 1;
 411
 412         while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
 413                 cpu_relax();
 414
 415         return limit;
 416 }
 417
 418 static int wait_dma_channel_stop(int channel)
 419 {
 420         unsigned long limit = loops_per_jiffy << 1;
 421
 422         while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
 423                 cpu_relax();
 424
 425         return limit;
 426 }
 427
 428 void dma_error_stop(struct driver_data *drv_data, const char *msg)
 429 {
 430         void *reg = drv_data->ioaddr;
 431
 432         /* Stop and reset */
 433         DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
 434         DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
 435         write_SSSR(drv_data->clear_sr, reg);
 436         write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
 437         if (drv_data->ssp_type != PXA25x_SSP)
 438                 write_SSTO(0, reg);
 439         flush(drv_data);
 440         write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
 441
 442         unmap_dma_buffers(drv_data);
 443
 444         dev_err(&drv_data->pdev->dev, "%s\n", msg);
 445
 446         drv_data->cur_msg->state = ERROR_STATE;
 447         tasklet_schedule(&drv_data->pump_transfers);
 448 }
 449
 450 static void dma_transfer_complete(struct driver_data *drv_data)
 451 {
 452         void *reg = drv_data->ioaddr;
 453         struct spi_message *msg = drv_data->cur_msg;
 454
 455         /* Clear and disable interrupts on SSP and DMA channels*/
 456         write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
 457         write_SSSR(drv_data->clear_sr, reg);
 458         DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
 459         DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
 460
 461         if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
 462                 dev_err(&drv_data->pdev->dev,
 463                         "dma_handler: dma rx channel stop failed\n");
 464
 465         if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
 466                 dev_err(&drv_data->pdev->dev,
 467                         "dma_transfer: ssp rx stall failed\n");
 468
 469         unmap_dma_buffers(drv_data);
 470
 471         /* update the buffer pointer for the amount completed in dma */
 472         drv_data->rx += drv_data->len -
 473                         (DCMD(drv_data->rx_channel) & DCMD_LENGTH);
 474
 475         /* read trailing data from fifo, it does not matter how many
 476          * bytes are in the fifo just read until buffer is full
 477          * or fifo is empty, which ever occurs first */
 478         drv_data->read(drv_data);
 479
 480         /* return count of what was actually read */
 481         msg->actual_length += drv_data->len -
 482                                 (drv_data->rx_end - drv_data->rx);
 483
 484         /* Release chip select if requested, transfer delays are
 485          * handled in pump_transfers */
 486         if (drv_data->cs_change)
 487                 drv_data->cs_control(PXA2XX_CS_DEASSERT);
 488
 489         /* Move to next transfer */
 490         msg->state = next_transfer(drv_data);
 491
 492         /* Schedule transfer tasklet */
 493         tasklet_schedule(&drv_data->pump_transfers);
 494 }
 495
 496 static void dma_handler(int channel, void *data)
 497 {
 498         struct driver_data *drv_data = data;
 499         u32 irq_status = DCSR(channel) & DMA_INT_MASK;
 500
 501         if (irq_status & DCSR_BUSERR) {
 502
 503                 if (channel == drv_data->tx_channel)
 504                         dma_error_stop(drv_data,
 505                                         "dma_handler: "
 506                                         "bad bus address on tx channel");
 507                 else
 508                         dma_error_stop(drv_data,
 509                                         "dma_handler: "
 510                                         "bad bus address on rx channel");
 511                 return;
 512         }
 513
 514         /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
 515         if ((channel == drv_data->tx_channel)
 516                 && (irq_status & DCSR_ENDINTR)
 517                 && (drv_data->ssp_type == PXA25x_SSP)) {
 518
 519                 /* Wait for rx to stall */
 520                 if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
 521                         dev_err(&drv_data->pdev->dev,
 522                                 "dma_handler: ssp rx stall failed\n");
 523
 524                 /* finish this transfer, start the next */
 525                 dma_transfer_complete(drv_data);
 526         }
 527 }
 528
 529 static irqreturn_t dma_transfer(struct driver_data *drv_data)
 530 {
 531         u32 irq_status;
 532         void *reg = drv_data->ioaddr;
 533
 534         irq_status = read_SSSR(reg) & drv_data->mask_sr;
 535         if (irq_status & SSSR_ROR) {
 536                 dma_error_stop(drv_data, "dma_transfer: fifo overrun");
 537                 return IRQ_HANDLED;
 538         }
 539
 540         /* Check for false positive timeout */
 541         if ((irq_status & SSSR_TINT)
 542                 && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
 543                 write_SSSR(SSSR_TINT, reg);
 544                 return IRQ_HANDLED;
 545         }
 546
 547         if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
 548
 549                 /* Clear and disable timeout interrupt, do the rest in
 550                  * dma_transfer_complete */
 551                 if (drv_data->ssp_type != PXA25x_SSP)
 552                         write_SSTO(0, reg);
 553
 554                 /* finish this transfer, start the next */
 555                 dma_transfer_complete(drv_data);
 556
 557                 return IRQ_HANDLED;
 558         }
 559
 560         /* Opps problem detected */
 561         return IRQ_NONE;
 562 }
 563
 564 static void int_error_stop(struct driver_data *drv_data, const char* msg)
 565 {
 566         void *reg = drv_data->ioaddr;
 567
 568         /* Stop and reset SSP */
 569         write_SSSR(drv_data->clear_sr, reg);
 570         write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
 571         if (drv_data->ssp_type != PXA25x_SSP)
 572                 write_SSTO(0, reg);
 573         flush(drv_data);
 574         write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
 575
 576         dev_err(&drv_data->pdev->dev, "%s\n", msg);
 577
 578         drv_data->cur_msg->state = ERROR_STATE;
 579         tasklet_schedule(&drv_data->pump_transfers);
 580 }
 581
 582 static void int_transfer_complete(struct driver_data *drv_data)
 583 {
 584         void *reg = drv_data->ioaddr;
 585
 586         /* Stop SSP */
 587         write_SSSR(drv_data->clear_sr, reg);
 588         write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
 589         if (drv_data->ssp_type != PXA25x_SSP)
 590                 write_SSTO(0, reg);
 591
 592         /* Update total byte transfered return count actual bytes read */
 593         drv_data->cur_msg->actual_length += drv_data->len -
 594                                 (drv_data->rx_end - drv_data->rx);
 595
 596         /* Release chip select if requested, transfer delays are
 597          * handled in pump_transfers */
 598         if (drv_data->cs_change)
 599                 drv_data->cs_control(PXA2XX_CS_DEASSERT);
 600
 601         /* Move to next transfer */
 602         drv_data->cur_msg->state = next_transfer(drv_data);
 603
 604         /* Schedule transfer tasklet */
 605         tasklet_schedule(&drv_data->pump_transfers);
 606 }
 607
 608 static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 609 {
 610         void *reg = drv_data->ioaddr;
 611
 612         u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
 613                         drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
 614
 615         u32 irq_status = read_SSSR(reg) & irq_mask;
 616
 617         if (irq_status & SSSR_ROR) {
 618                 int_error_stop(drv_data, "interrupt_transfer: fifo overrun");
 619                 return IRQ_HANDLED;
 620         }
 621
 622         if (irq_status & SSSR_TINT) {
 623                 write_SSSR(SSSR_TINT, reg);
 624                 if (drv_data->read(drv_data)) {
 625                         int_transfer_complete(drv_data);
 626                         return IRQ_HANDLED;
 627                 }
 628         }
 629
 630         /* Drain rx fifo, Fill tx fifo and prevent overruns */
 631         do {
 632                 if (drv_data->read(drv_data)) {
 633                         int_transfer_complete(drv_data);
 634                         return IRQ_HANDLED;
 635                 }
 636         } while (drv_data->write(drv_data));
 637
 638         if (drv_data->read(drv_data)) {
 639                 int_transfer_complete(drv_data);
 640                 return IRQ_HANDLED;
 641         }
 642
 643         if (drv_data->tx == drv_data->tx_end) {
 644                 write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
 645                 /* PXA25x_SSP has no timeout, read trailing bytes */
 646                 if (drv_data->ssp_type == PXA25x_SSP) {
 647                         if (!wait_ssp_rx_stall(reg))
 648                         {
 649                                 int_error_stop(drv_data, "interrupt_transfer: "
 650                                                 "rx stall failed");
 651                                 return IRQ_HANDLED;
 652                         }
 653                         if (!drv_data->read(drv_data))
 654                         {
 655                                 int_error_stop(drv_data,
 656                                                 "interrupt_transfer: "
 657                                                 "trailing byte read failed");
 658                                 return IRQ_HANDLED;
 659                         }
 660                         int_transfer_complete(drv_data);
 661                 }
 662         }
 663
 664         /* We did something */
 665         return IRQ_HANDLED;
 666 }
 667
 668 static irqreturn_t ssp_int(int irq, void *dev_id)
 669 {
 670         struct driver_data *drv_data = dev_id;
 671         void *reg = drv_data->ioaddr;
 672
 673         if (!drv_data->cur_msg) {
 674
 675                 write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
 676                 write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
 677                 if (drv_data->ssp_type != PXA25x_SSP)
 678                         write_SSTO(0, reg);
 679                 write_SSSR(drv_data->clear_sr, reg);
 680
 681                 dev_err(&drv_data->pdev->dev, "bad message state "
 682                         "in interrupt handler\n");
 683
 684                 /* Never fail */
 685                 return IRQ_HANDLED;
 686         }
 687
 688         return drv_data->transfer_handler(drv_data);
 689 }
 690
 691 int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi,
 692                                 u8 bits_per_word, u32 *burst_code,
 693                                 u32 *threshold)
 694 {
 695         struct pxa2xx_spi_chip *chip_info =
 696                         (struct pxa2xx_spi_chip *)spi->controller_data;
 697         int bytes_per_word;
 698         int burst_bytes;
 699         int thresh_words;
 700         int req_burst_size;
 701         int retval = 0;
 702
 703         /* Set the threshold (in registers) to equal the same amount of data
 704          * as represented by burst size (in bytes).  The computation below
 705          * is (burst_size rounded up to nearest 8 byte, word or long word)
 706          * divided by (bytes/register); the tx threshold is the inverse of
 707          * the rx, so that there will always be enough data in the rx fifo
 708          * to satisfy a burst, and there will always be enough space in the
 709          * tx fifo to accept a burst (a tx burst will overwrite the fifo if
 710          * there is not enough space), there must always remain enough empty
 711          * space in the rx fifo for any data loaded to the tx fifo.
 712          * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
 713          * will be 8, or half the fifo;
 714          * The threshold can only be set to 2, 4 or 8, but not 16, because
 715          * to burst 16 to the tx fifo, the fifo would have to be empty;
 716          * however, the minimum fifo trigger level is 1, and the tx will
 717          * request service when the fifo is at this level, with only 15 spaces.
 718          */
 719
 720         /* find bytes/word */
 721         if (bits_per_word <= 8)
 722                 bytes_per_word = 1;
 723         else if (bits_per_word <= 16)
 724                 bytes_per_word = 2;
 725         else
 726                 bytes_per_word = 4;
 727
 728         /* use struct pxa2xx_spi_chip->dma_burst_size if available */
 729         if (chip_info)
 730                 req_burst_size = chip_info->dma_burst_size;
 731         else {
 732                 switch (chip->dma_burst_size) {
 733                 default:
 734                         /* if the default burst size is not set,
 735                          * do it now */
 736                         chip->dma_burst_size = DCMD_BURST8;
 737                 case DCMD_BURST8:
 738                         req_burst_size = 8;
 739                         break;
 740                 case DCMD_BURST16:
 741                         req_burst_size = 16;
 742                         break;
 743                 case DCMD_BURST32:
 744                         req_burst_size = 32;
 745                         break;
 746                 }
 747         }
 748         if (req_burst_size <= 8) {
 749                 *burst_code = DCMD_BURST8;
 750                 burst_bytes = 8;
 751         } else if (req_burst_size <= 16) {
 752                 if (bytes_per_word == 1) {
 753                         /* don't burst more than 1/2 the fifo */
 754                         *burst_code = DCMD_BURST8;
 755                         burst_bytes = 8;
 756                         retval = 1;
 757                 } else {
 758                         *burst_code = DCMD_BURST16;
 759                         burst_bytes = 16;
 760                 }
 761         } else {
 762                 if (bytes_per_word == 1) {
 763                         /* don't burst more than 1/2 the fifo */
 764                         *burst_code = DCMD_BURST8;
 765                         burst_bytes = 8;
 766                         retval = 1;
 767                 } else if (bytes_per_word == 2) {
 768                         /* don't burst more than 1/2 the fifo */
 769                         *burst_code = DCMD_BURST16;
 770                         burst_bytes = 16;
 771                         retval = 1;
 772                 } else {
 773                         *burst_code = DCMD_BURST32;
 774                         burst_bytes = 32;
 775                 }
 776         }
 777
 778         thresh_words = burst_bytes / bytes_per_word;
 779
 780         /* thresh_words will be between 2 and 8 */
 781         *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
 782                         | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
 783
 784         return retval;
 785 }
 786
 787 static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
 788 {
 789         unsigned long ssp_clk = clk_get_rate(ssp->clk);
 790
 791         if (ssp->type == PXA25x_SSP)
 792                 return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
 793         else
 794                 return ((ssp_clk / rate - 1) & 0xfff) << 8;
 795 }
 796
 797 static void pump_transfers(unsigned long data)
 798 {
 799         struct driver_data *drv_data = (struct driver_data *)data;
 800         struct spi_message *message = NULL;
 801         struct spi_transfer *transfer = NULL;
 802         struct spi_transfer *previous = NULL;
 803         struct chip_data *chip = NULL;
 804         struct ssp_device *ssp = drv_data->ssp;
 805         void *reg = drv_data->ioaddr;
 806         u32 clk_div = 0;
 807         u8 bits = 0;
 808         u32 speed = 0;
 809         u32 cr0;
 810         u32 cr1;
 811         u32 dma_thresh = drv_data->cur_chip->dma_threshold;
 812         u32 dma_burst = drv_data->cur_chip->dma_burst_size;
 813
 814         /* Get current state information */
 815         message = drv_data->cur_msg;
 816         transfer = drv_data->cur_transfer;
 817         chip = drv_data->cur_chip;
 818
 819         /* Handle for abort */
 820         if (message->state == ERROR_STATE) {
 821                 message->status = -EIO;
 822                 giveback(drv_data);
 823                 return;
 824         }
 825
 826         /* Handle end of message */
 827         if (message->state == DONE_STATE) {
 828                 message->status = 0;
 829                 giveback(drv_data);
 830                 return;
 831         }
 832
 833         /* Delay if requested at end of transfer*/
 834         if (message->state == RUNNING_STATE) {
 835                 previous = list_entry(transfer->transfer_list.prev,
 836                                         struct spi_transfer,
 837                                         transfer_list);
 838                 if (previous->delay_usecs)
 839                         udelay(previous->delay_usecs);
 840         }
 841
 842         /* Check transfer length */
 843         if (transfer->len > 8191)
 844         {
 845                 dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
 846                                 "length greater than 8191\n");
 847                 message->status = -EINVAL;
 848                 giveback(drv_data);
 849                 return;
 850         }
 851
 852         /* Setup the transfer state based on the type of transfer */
 853         if (flush(drv_data) == 0) {
 854                 dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
 855                 message->status = -EIO;
 856                 giveback(drv_data);
 857                 return;
 858         }
 859         drv_data->n_bytes = chip->n_bytes;
 860         drv_data->dma_width = chip->dma_width;
 861         drv_data->cs_control = chip->cs_control;
 862         drv_data->tx = (void *)transfer->tx_buf;
 863         drv_data->tx_end = drv_data->tx + transfer->len;
 864         drv_data->rx = transfer->rx_buf;
 865         drv_data->rx_end = drv_data->rx + transfer->len;
 866         drv_data->rx_dma = transfer->rx_dma;
 867         drv_data->tx_dma = transfer->tx_dma;
 868         drv_data->len = transfer->len & DCMD_LENGTH;
 869         drv_data->write = drv_data->tx ? chip->write : null_writer;
 870         drv_data->read = drv_data->rx ? chip->read : null_reader;
 871         drv_data->cs_change = transfer->cs_change;
 872
 873         /* Change speed and bit per word on a per transfer */
 874         cr0 = chip->cr0;
 875         if (transfer->speed_hz || transfer->bits_per_word) {
 876
 877                 bits = chip->bits_per_word;
 878                 speed = chip->speed_hz;
 879
 880                 if (transfer->speed_hz)
 881                         speed = transfer->speed_hz;
 882
 883                 if (transfer->bits_per_word)
 884                         bits = transfer->bits_per_word;
 885
 886                 clk_div = ssp_get_clk_div(ssp, speed);
 887
 888                 if (bits <= 8) {
 889                         drv_data->n_bytes = 1;
 890                         drv_data->dma_width = DCMD_WIDTH1;
 891                         drv_data->read = drv_data->read != null_reader ?
 892                                                 u8_reader : null_reader;
 893                         drv_data->write = drv_data->write != null_writer ?
 894                                                 u8_writer : null_writer;
 895                 } else if (bits <= 16) {
 896                         drv_data->n_bytes = 2;
 897                         drv_data->dma_width = DCMD_WIDTH2;
 898                         drv_data->read = drv_data->read != null_reader ?
 899                                                 u16_reader : null_reader;
 900                         drv_data->write = drv_data->write != null_writer ?
 901                                                 u16_writer : null_writer;
 902                 } else if (bits <= 32) {
 903                         drv_data->n_bytes = 4;
 904                         drv_data->dma_width = DCMD_WIDTH4;
 905                         drv_data->read = drv_data->read != null_reader ?
 906                                                 u32_reader : null_reader;
 907                         drv_data->write = drv_data->write != null_writer ?
 908                                                 u32_writer : null_writer;
 909                 }
 910                 /* if bits/word is changed in dma mode, then must check the
 911                  * thresholds and burst also */
 912                 if (chip->enable_dma) {
 913                         if (set_dma_burst_and_threshold(chip, message->spi,
 914                                                         bits, &dma_burst,
 915                                                         &dma_thresh))
 916                                 if (printk_ratelimit())
 917                                         dev_warn(&message->spi->dev,
 918                                                 "pump_transfer: "
 919                                                 "DMA burst size reduced to "
 920                                                 "match bits_per_word\n");
 921                 }
 922
 923                 cr0 = clk_div
 924                         | SSCR0_Motorola
 925                         | SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
 926                         | SSCR0_SSE
 927                         | (bits > 16 ? SSCR0_EDSS : 0);
 928         }
 929
 930         message->state = RUNNING_STATE;
 931
 932         /* Try to map dma buffer and do a dma transfer if successful */
 933         if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
 934
 935                 /* Ensure we have the correct interrupt handler */
 936                 drv_data->transfer_handler = dma_transfer;
 937
 938                 /* Setup rx DMA Channel */
 939                 DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
 940                 DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
 941                 DTADR(drv_data->rx_channel) = drv_data->rx_dma;
 942                 if (drv_data->rx == drv_data->null_dma_buf)
 943                         /* No target address increment */
 944                         DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
 945                                                         | drv_data->dma_width
 946                                                         | dma_burst
 947                                                         | drv_data->len;
 948                 else
 949                         DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
 950                                                         | DCMD_FLOWSRC
 951                                                         | drv_data->dma_width
 952                                                         | dma_burst
 953                                                         | drv_data->len;
 954
 955                 /* Setup tx DMA Channel */
 956                 DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
 957                 DSADR(drv_data->tx_channel) = drv_data->tx_dma;
 958                 DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
 959                 if (drv_data->tx == drv_data->null_dma_buf)
 960                         /* No source address increment */
 961                         DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
 962                                                         | drv_data->dma_width
 963                                                         | dma_burst
 964                                                         | drv_data->len;
 965                 else
 966                         DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
 967                                                         | DCMD_FLOWTRG
 968                                                         | drv_data->dma_width
 969                                                         | dma_burst
 970                                                         | drv_data->len;
 971
 972                 /* Enable dma end irqs on SSP to detect end of transfer */
 973                 if (drv_data->ssp_type == PXA25x_SSP)
 974                         DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
 975
 976                 /* Fix me, need to handle cs polarity */
 977                 drv_data->cs_control(PXA2XX_CS_ASSERT);
 978
 979                 /* Clear status and start DMA engine */
 980                 cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
 981                 write_SSSR(drv_data->clear_sr, reg);
 982                 DCSR(drv_data->rx_channel) |= DCSR_RUN;
 983                 DCSR(drv_data->tx_channel) |= DCSR_RUN;
 984         } else {
 985                 /* Ensure we have the correct interrupt handler */
 986                 drv_data->transfer_handler = interrupt_transfer;
 987
 988                 /* Fix me, need to handle cs polarity */
 989                 drv_data->cs_control(PXA2XX_CS_ASSERT);
 990
 991                 /* Clear status  */
 992                 cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
 993                 write_SSSR(drv_data->clear_sr, reg);
 994         }
 995
 996         /* see if we need to reload the config registers */
 997         if ((read_SSCR0(reg) != cr0)
 998                 || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) !=
 999                         (cr1 & SSCR1_CHANGE_MASK)) {
1000
1001                 write_SSCR0(cr0 & ~SSCR0_SSE, reg);
1002                 if (drv_data->ssp_type != PXA25x_SSP)
1003                         write_SSTO(chip->timeout, reg);
1004                 write_SSCR1(cr1, reg);
1005                 write_SSCR0(cr0, reg);
1006         } else {
1007                 if (drv_data->ssp_type != PXA25x_SSP)
1008                         write_SSTO(chip->timeout, reg);
1009                 write_SSCR1(cr1, reg);
1010         }
1011 }
1012
1013 static void pump_messages(struct work_struct *work)
1014 {
1015         struct driver_data *drv_data =
1016                 container_of(work, struct driver_data, pump_messages);
1017         unsigned long flags;
1018
1019         /* Lock queue and check for queue work */
1020         spin_lock_irqsave(&drv_data->lock, flags);
1021         if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
1022                 drv_data->busy = 0;
1023                 spin_unlock_irqrestore(&drv_data->lock, flags);
1024                 return;
1025         }
1026
1027         /* Make sure we are not already running a message */
1028         if (drv_data->cur_msg) {
1029                 spin_unlock_irqrestore(&drv_data->lock, flags);
1030                 return;
1031         }
1032
1033         /* Extract head of queue */
1034         drv_data->cur_msg = list_entry(drv_data->queue.next,
1035                                         struct spi_message, queue);
1036         list_del_init(&drv_data->cur_msg->queue);
1037
1038         /* Initial message state*/
1039         drv_data->cur_msg->state = START_STATE;
1040         drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
1041                                                 struct spi_transfer,
1042                                                 transfer_list);
1043
1044         /* prepare to setup the SSP, in pump_transfers, using the per
1045          * chip configuration */
1046         drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
1047
1048         /* Mark as busy and launch transfers */
1049         tasklet_schedule(&drv_data->pump_transfers);
1050
1051         drv_data->busy = 1;
1052         spin_unlock_irqrestore(&drv_data->lock, flags);
1053 }
1054
1055 static int transfer(struct spi_device *spi, struct spi_message *msg)
1056 {
1057         struct driver_data *drv_data = spi_master_get_devdata(spi->master);
1058         unsigned long flags;
1059
1060         spin_lock_irqsave(&drv_data->lock, flags);
1061
1062         if (drv_data->run == QUEUE_STOPPED) {
1063                 spin_unlock_irqrestore(&drv_data->lock, flags);
1064                 return -ESHUTDOWN;
1065         }
1066
1067         msg->actual_length = 0;
1068         msg->status = -EINPROGRESS;
1069         msg->state = START_STATE;
1070
1071         list_add_tail(&msg->queue, &drv_data->queue);
1072
1073         if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
1074                 queue_work(drv_data->workqueue, &drv_data->pump_messages);
1075
1076         spin_unlock_irqrestore(&drv_data->lock, flags);
1077
1078         return 0;
1079 }
1080
1081 /* the spi->mode bits understood by this driver: */
1082 #define MODEBITS (SPI_CPOL | SPI_CPHA)
1083
1084 static int setup(struct spi_device *spi)
1085 {
1086         struct pxa2xx_spi_chip *chip_info = NULL;
1087         struct chip_data *chip;
1088         struct driver_data *drv_data = spi_master_get_devdata(spi->master);
1089         struct ssp_device *ssp = drv_data->ssp;
1090         unsigned int clk_div;
1091
1092         if (!spi->bits_per_word)
1093                 spi->bits_per_word = 8;
1094
1095         if (drv_data->ssp_type != PXA25x_SSP
1096                 && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
1097                 dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
1098                                 "b/w not 4-32 for type non-PXA25x_SSP\n",
1099                                 drv_data->ssp_type, spi->bits_per_word);
1100                 return -EINVAL;
1101         }
1102         else if (drv_data->ssp_type == PXA25x_SSP
1103                         && (spi->bits_per_word < 4
1104                                 || spi->bits_per_word > 16)) {
1105                 dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
1106                                 "b/w not 4-16 for type PXA25x_SSP\n",
1107                                 drv_data->ssp_type, spi->bits_per_word);
1108                 return -EINVAL;
1109         }
1110
1111         if (spi->mode & ~MODEBITS) {
1112                 dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
1113                         spi->mode & ~MODEBITS);
1114                 return -EINVAL;
1115         }
1116
1117         /* Only alloc on first setup */
1118         chip = spi_get_ctldata(spi);
1119         if (!chip) {
1120                 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
1121                 if (!chip) {
1122                         dev_err(&spi->dev,
1123                                 "failed setup: can't allocate chip data\n");
1124                         return -ENOMEM;
1125                 }
1126
1127                 chip->cs_control = null_cs_control;
1128                 chip->enable_dma = 0;
1129                 chip->timeout = 1000;
1130                 chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
1131                 chip->dma_burst_size = drv_data->master_info->enable_dma ?
1132                                         DCMD_BURST8 : 0;
1133         }
1134
1135         /* protocol drivers may change the chip settings, so...
1136          * if chip_info exists, use it */
1137         chip_info = spi->controller_data;
1138
1139         /* chip_info isn't always needed */
1140         chip->cr1 = 0;
1141         if (chip_info) {
1142                 if (chip_info->cs_control)
1143                         chip->cs_control = chip_info->cs_control;
1144
1145                 chip->timeout = chip_info->timeout;
1146
1147                 chip->threshold = (SSCR1_RxTresh(chip_info->rx_threshold) &
1148                                                                 SSCR1_RFT) |
1149                                 (SSCR1_TxTresh(chip_info->tx_threshold) &
1150                                                                 SSCR1_TFT);
1151
1152                 chip->enable_dma = chip_info->dma_burst_size != 0
1153                                         && drv_data->master_info->enable_dma;
1154                 chip->dma_threshold = 0;
1155
1156                 if (chip_info->enable_loopback)
1157                         chip->cr1 = SSCR1_LBM;
1158         }
1159
1160         /* set dma burst and threshold outside of chip_info path so that if
1161          * chip_info goes away after setting chip->enable_dma, the
1162          * burst and threshold can still respond to changes in bits_per_word */
1163         if (chip->enable_dma) {
1164                 /* set up legal burst and threshold for dma */
1165                 if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word,
1166                                                 &chip->dma_burst_size,
1167                                                 &chip->dma_threshold)) {
1168                         dev_warn(&spi->dev, "in setup: DMA burst size reduced "
1169                                         "to match bits_per_word\n");
1170                 }
1171         }
1172
1173         clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
1174         chip->speed_hz = spi->max_speed_hz;
1175
1176         chip->cr0 = clk_div
1177                         | SSCR0_Motorola
1178                         | SSCR0_DataSize(spi->bits_per_word > 16 ?
1179                                 spi->bits_per_word - 16 : spi->bits_per_word)
1180                         | SSCR0_SSE
1181                         | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
1182         chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
1183         chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
1184                         | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
1185
1186         /* NOTE:  PXA25x_SSP _could_ use external clocking ... */
1187         if (drv_data->ssp_type != PXA25x_SSP)
1188                 dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
1189                                 spi->bits_per_word,
1190                                 clk_get_rate(ssp->clk)
1191                                         / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
1192                                 spi->mode & 0x3);
1193         else
1194                 dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
1195                                 spi->bits_per_word,
1196                                 clk_get_rate(ssp->clk)
1197                                         / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
1198                                 spi->mode & 0x3);
1199
1200         if (spi->bits_per_word <= 8) {
1201                 chip->n_bytes = 1;
1202                 chip->dma_width = DCMD_WIDTH1;
1203                 chip->read = u8_reader;
1204                 chip->write = u8_writer;
1205         } else if (spi->bits_per_word <= 16) {
1206                 chip->n_bytes = 2;
1207                 chip->dma_width = DCMD_WIDTH2;
1208                 chip->read = u16_reader;
1209                 chip->write = u16_writer;
1210         } else if (spi->bits_per_word <= 32) {
1211                 chip->cr0 |= SSCR0_EDSS;
1212                 chip->n_bytes = 4;
1213                 chip->dma_width = DCMD_WIDTH4;
1214                 chip->read = u32_reader;
1215                 chip->write = u32_writer;
1216         } else {
1217                 dev_err(&spi->dev, "invalid wordsize\n");
1218                 return -ENODEV;
1219         }
1220         chip->bits_per_word = spi->bits_per_word;
1221
1222         spi_set_ctldata(spi, chip);
1223
1224         return 0;
1225 }
1226
1227 static void cleanup(struct spi_device *spi)
1228 {
1229         struct chip_data *chip = spi_get_ctldata(spi);
1230
1231         kfree(chip);
1232 }
1233
1234 static int __init init_queue(struct driver_data *drv_data)
1235 {
1236         INIT_LIST_HEAD(&drv_data->queue);
1237         spin_lock_init(&drv_data->lock);
1238
1239         drv_data->run = QUEUE_STOPPED;
1240         drv_data->busy = 0;
1241
1242         tasklet_init(&drv_data->pump_transfers,
1243                         pump_transfers, (unsigned long)drv_data);
1244
1245         INIT_WORK(&drv_data->pump_messages, pump_messages);
1246         drv_data->workqueue = create_singlethread_workqueue(
1247                                         drv_data->master->dev.parent->bus_id);
1248         if (drv_data->workqueue == NULL)
1249                 return -EBUSY;
1250
1251         return 0;
1252 }
1253
1254 static int start_queue(struct driver_data *drv_data)
1255 {
1256         unsigned long flags;
1257
1258         spin_lock_irqsave(&drv_data->lock, flags);
1259
1260         if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
1261                 spin_unlock_irqrestore(&drv_data->lock, flags);
1262                 return -EBUSY;
1263         }
1264
1265         drv_data->run = QUEUE_RUNNING;
1266         drv_data->cur_msg = NULL;
1267         drv_data->cur_transfer = NULL;
1268         drv_data->cur_chip = NULL;
1269         spin_unlock_irqrestore(&drv_data->lock, flags);
1270
1271         queue_work(drv_data->workqueue, &drv_data->pump_messages);
1272
1273         return 0;
1274 }
1275
1276 static int stop_queue(struct driver_data *drv_data)
1277 {
1278         unsigned long flags;
1279         unsigned limit = 500;
1280         int status = 0;
1281
1282         spin_lock_irqsave(&drv_data->lock, flags);
1283
1284         /* This is a bit lame, but is optimized for the common execution path.
1285          * A wait_queue on the drv_data->busy could be used, but then the common
1286          * execution path (pump_messages) would be required to call wake_up or
1287          * friends on every SPI message. Do this instead */
1288         drv_data->run = QUEUE_STOPPED;
1289         while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
1290                 spin_unlock_irqrestore(&drv_data->lock, flags);
1291                 msleep(10);
1292                 spin_lock_irqsave(&drv_data->lock, flags);
1293         }
1294
1295         if (!list_empty(&drv_data->queue) || drv_data->busy)
1296                 status = -EBUSY;
1297
1298         spin_unlock_irqrestore(&drv_data->lock, flags);
1299
1300         return status;
1301 }
1302
1303 static int destroy_queue(struct driver_data *drv_data)
1304 {
1305         int status;
1306
1307         status = stop_queue(drv_data);
1308         /* we are unloading the module or failing to load (only two calls
1309          * to this routine), and neither call can handle a return value.
1310          * However, destroy_workqueue calls flush_workqueue, and that will
1311          * block until all work is done.  If the reason that stop_queue
1312          * timed out is that the work will never finish, then it does no
1313          * good to call destroy_workqueue, so return anyway. */
1314         if (status != 0)
1315                 return status;
1316
1317         destroy_workqueue(drv_data->workqueue);
1318
1319         return 0;
1320 }
1321
1322 static int __init pxa2xx_spi_probe(struct platform_device *pdev)
1323 {
1324         struct device *dev = &pdev->dev;
1325         struct pxa2xx_spi_master *platform_info;
1326         struct spi_master *master;
1327         struct driver_data *drv_data = 0;
1328         struct ssp_device *ssp;
1329         int status = 0;
1330
1331         platform_info = dev->platform_data;
1332
1333         ssp = ssp_request(pdev->id, pdev->name);
1334         if (ssp == NULL) {
1335                 dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
1336                 return -ENODEV;
1337         }
1338
1339         /* Allocate master with space for drv_data and null dma buffer */
1340         master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
1341         if (!master) {
1342                 dev_err(&pdev->dev, "can not alloc spi_master\n");
1343                 ssp_free(ssp);
1344                 return -ENOMEM;
1345         }
1346         drv_data = spi_master_get_devdata(master);
1347         drv_data->master = master;
1348         drv_data->master_info = platform_info;
1349         drv_data->pdev = pdev;
1350         drv_data->ssp = ssp;
1351
1352         master->bus_num = pdev->id;
1353         master->num_chipselect = platform_info->num_chipselect;
1354         master->cleanup = cleanup;
1355         master->setup = setup;
1356         master->transfer = transfer;
1357
1358         drv_data->ssp_type = ssp->type;
1359         drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
1360                                                 sizeof(struct driver_data)), 8);
1361
1362         drv_data->ioaddr = ssp->mmio_base;
1363         drv_data->ssdr_physical = ssp->phys_base + SSDR;
1364         if (ssp->type == PXA25x_SSP) {
1365                 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
1366                 drv_data->dma_cr1 = 0;
1367                 drv_data->clear_sr = SSSR_ROR;
1368                 drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
1369         } else {
1370                 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
1371                 drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
1372                 drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
1373                 drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
1374         }
1375
1376         status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data);
1377         if (status < 0) {
1378                 dev_err(&pdev->dev, "can not get IRQ\n");
1379                 goto out_error_master_alloc;
1380         }
1381
1382         /* Setup DMA if requested */
1383         drv_data->tx_channel = -1;
1384         drv_data->rx_channel = -1;
1385         if (platform_info->enable_dma) {
1386
1387                 /* Get two DMA channels (rx and tx) */
1388                 drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
1389                                                         DMA_PRIO_HIGH,
1390                                                         dma_handler,
1391                                                         drv_data);
1392                 if (drv_data->rx_channel < 0) {
1393                         dev_err(dev, "problem (%d) requesting rx channel\n",
1394                                 drv_data->rx_channel);
1395                         status = -ENODEV;
1396                         goto out_error_irq_alloc;
1397                 }
1398                 drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
1399                                                         DMA_PRIO_MEDIUM,
1400                                                         dma_handler,
1401                                                         drv_data);
1402                 if (drv_data->tx_channel < 0) {
1403                         dev_err(dev, "problem (%d) requesting tx channel\n",
1404                                 drv_data->tx_channel);
1405                         status = -ENODEV;
1406                         goto out_error_dma_alloc;
1407                 }
1408
1409                 DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
1410                 DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
1411         }
1412
1413         /* Enable SOC clock */
1414         clk_enable(ssp->clk);
1415
1416         /* Load default SSP configuration */
1417         write_SSCR0(0, drv_data->ioaddr);
1418         write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr);
1419         write_SSCR0(SSCR0_SerClkDiv(2)
1420                         | SSCR0_Motorola
1421                         | SSCR0_DataSize(8),
1422                         drv_data->ioaddr);
1423         if (drv_data->ssp_type != PXA25x_SSP)
1424                 write_SSTO(0, drv_data->ioaddr);
1425         write_SSPSP(0, drv_data->ioaddr);
1426
1427         /* Initial and start queue */
1428         status = init_queue(drv_data);
1429         if (status != 0) {
1430                 dev_err(&pdev->dev, "problem initializing queue\n");
1431                 goto out_error_clock_enabled;
1432         }
1433         status = start_queue(drv_data);
1434         if (status != 0) {
1435                 dev_err(&pdev->dev, "problem starting queue\n");
1436                 goto out_error_clock_enabled;
1437         }
1438
1439         /* Register with the SPI framework */
1440         platform_set_drvdata(pdev, drv_data);
1441         status = spi_register_master(master);
1442         if (status != 0) {
1443                 dev_err(&pdev->dev, "problem registering spi master\n");
1444                 goto out_error_queue_alloc;
1445         }
1446
1447         return status;
1448
1449 out_error_queue_alloc:
1450         destroy_queue(drv_data);
1451
1452 out_error_clock_enabled:
1453         clk_disable(ssp->clk);
1454
1455 out_error_dma_alloc:
1456         if (drv_data->tx_channel != -1)
1457                 pxa_free_dma(drv_data->tx_channel);
1458         if (drv_data->rx_channel != -1)
1459                 pxa_free_dma(drv_data->rx_channel);
1460
1461 out_error_irq_alloc:
1462         free_irq(ssp->irq, drv_data);
1463
1464 out_error_master_alloc:
1465         spi_master_put(master);
1466         ssp_free(ssp);
1467         return status;
1468 }
1469
1470 static int pxa2xx_spi_remove(struct platform_device *pdev)
1471 {
1472         struct driver_data *drv_data = platform_get_drvdata(pdev);
1473         struct ssp_device *ssp = drv_data->ssp;
1474         int status = 0;
1475
1476         if (!drv_data)
1477                 return 0;
1478
1479         /* Remove the queue */
1480         status = destroy_queue(drv_data);
1481         if (status != 0)
1482                 /* the kernel does not check the return status of this
1483                  * this routine (mod->exit, within the kernel).  Therefore
1484                  * nothing is gained by returning from here, the module is
1485                  * going away regardless, and we should not leave any more
1486                  * resources allocated than necessary.  We cannot free the
1487                  * message memory in drv_data->queue, but we can release the
1488                  * resources below.  I think the kernel should honor -EBUSY
1489                  * returns but... */
1490                 dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not "
1491                         "complete, message memory not freed\n");
1492
1493         /* Disable the SSP at the peripheral and SOC level */
1494         write_SSCR0(0, drv_data->ioaddr);
1495         clk_disable(ssp->clk);
1496
1497         /* Release DMA */
1498         if (drv_data->master_info->enable_dma) {
1499                 DRCMR(ssp->drcmr_rx) = 0;
1500                 DRCMR(ssp->drcmr_tx) = 0;
1501                 pxa_free_dma(drv_data->tx_channel);
1502                 pxa_free_dma(drv_data->rx_channel);
1503         }
1504
1505         /* Release IRQ */
1506         free_irq(ssp->irq, drv_data);
1507
1508         /* Release SSP */
1509         ssp_free(ssp);
1510
1511         /* Disconnect from the SPI framework */
1512         spi_unregister_master(drv_data->master);
1513
1514         /* Prevent double remove */
1515         platform_set_drvdata(pdev, NULL);
1516
1517         return 0;
1518 }
1519
1520 static void pxa2xx_spi_shutdown(struct platform_device *pdev)
1521 {
1522         int status = 0;
1523
1524         if ((status = pxa2xx_spi_remove(pdev)) != 0)
1525                 dev_err(&pdev->dev, "shutdown failed with %d\n", status);
1526 }
1527
1528 #ifdef CONFIG_PM
1529
1530 static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
1531 {
1532         struct driver_data *drv_data = platform_get_drvdata(pdev);
1533         struct ssp_device *ssp = drv_data->ssp;
1534         int status = 0;
1535
1536         status = stop_queue(drv_data);
1537         if (status != 0)
1538                 return status;
1539         write_SSCR0(0, drv_data->ioaddr);
1540         clk_disable(ssp->clk);
1541
1542         return 0;
1543 }
1544
1545 static int pxa2xx_spi_resume(struct platform_device *pdev)
1546 {
1547         struct driver_data *drv_data = platform_get_drvdata(pdev);
1548         struct ssp_device *ssp = drv_data->ssp;
1549         int status = 0;
1550
1551         /* Enable the SSP clock */
1552         clk_disable(ssp->clk);
1553
1554         /* Start the queue running */
1555         status = start_queue(drv_data);
1556         if (status != 0) {
1557                 dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
1558                 return status;
1559         }
1560
1561         return 0;
1562 }
1563 #else
1564 #define pxa2xx_spi_suspend NULL
1565 #define pxa2xx_spi_resume NULL
1566 #endif /* CONFIG_PM */
1567
1568 static struct platform_driver driver = {
1569         .driver = {
1570                 .name = "pxa2xx-spi",
1571                 .bus = &platform_bus_type,
1572                 .owner = THIS_MODULE,
1573         },
1574         .remove = pxa2xx_spi_remove,
1575         .shutdown = pxa2xx_spi_shutdown,
1576         .suspend = pxa2xx_spi_suspend,
1577         .resume = pxa2xx_spi_resume,
1578 };
1579
1580 static int __init pxa2xx_spi_init(void)
1581 {
1582         return platform_driver_probe(&driver, pxa2xx_spi_probe);
1583 }
1584 module_init(pxa2xx_spi_init);
1585
1586 static void __exit pxa2xx_spi_exit(void)
1587 {
1588         platform_driver_unregister(&driver);
1589 }
1590 module_exit(pxa2xx_spi_exit);