git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/boot/dts/lite5200b.dts

   1 /*
   2  * Lite5200B board Device Tree Source
   3  *
   4  * Copyright 2006-2007 Secret Lab Technologies Ltd.
   5  * Grant Likely <grant.likely@secretlab.ca>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /dts-v1/;
  14
  15 / {
  16         model = "fsl,lite5200b";
  17         compatible = "fsl,lite5200b";
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20
  21         cpus {
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 PowerPC,5200@0 {
  26                         device_type = "cpu";
  27                         reg = <0>;
  28                         d-cache-line-size = <32>;
  29                         i-cache-line-size = <32>;
  30                         d-cache-size = <0x4000>;        // L1, 16K
  31                         i-cache-size = <0x4000>;        // L1, 16K
  32                         timebase-frequency = <0>;       // from bootloader
  33                         bus-frequency = <0>;            // from bootloader
  34                         clock-frequency = <0>;          // from bootloader
  35                 };
  36         };
  37
  38         memory {
  39                 device_type = "memory";
  40                 reg = <0x00000000 0x10000000>;  // 256MB
  41         };
  42
  43         soc5200@f0000000 {
  44                 #address-cells = <1>;
  45                 #size-cells = <1>;
  46                 compatible = "fsl,mpc5200b-immr";
  47                 ranges = <0 0xf0000000 0x0000c000>;
  48                 reg = <0xf0000000 0x00000100>;
  49                 bus-frequency = <0>;            // from bootloader
  50                 system-frequency = <0>;         // from bootloader
  51
  52                 cdm@200 {
  53                         compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
  54                         reg = <0x200 0x38>;
  55                 };
  56
  57                 mpc5200_pic: interrupt-controller@500 {
  58                         // 5200 interrupts are encoded into two levels;
  59                         interrupt-controller;
  60                         #interrupt-cells = <3>;
  61                         device_type = "interrupt-controller";
  62                         compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
  63                         reg = <0x500 0x80>;
  64                 };
  65
  66                 timer@600 {     // General Purpose Timer
  67                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  68                         cell-index = <0>;
  69                         reg = <0x600 0x10>;
  70                         interrupts = <1 9 0>;
  71                         interrupt-parent = <&mpc5200_pic>;
  72                         fsl,has-wdt;
  73                 };
  74
  75                 timer@610 {     // General Purpose Timer
  76                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  77                         cell-index = <1>;
  78                         reg = <0x610 0x10>;
  79                         interrupts = <1 10 0>;
  80                         interrupt-parent = <&mpc5200_pic>;
  81                 };
  82
  83                 timer@620 {     // General Purpose Timer
  84                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  85                         cell-index = <2>;
  86                         reg = <0x620 0x10>;
  87                         interrupts = <1 11 0>;
  88                         interrupt-parent = <&mpc5200_pic>;
  89                 };
  90
  91                 timer@630 {     // General Purpose Timer
  92                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  93                         cell-index = <3>;
  94                         reg = <0x630 0x10>;
  95                         interrupts = <1 12 0>;
  96                         interrupt-parent = <&mpc5200_pic>;
  97                 };
  98
  99                 timer@640 {     // General Purpose Timer
 100                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 101                         cell-index = <4>;
 102                         reg = <0x640 0x10>;
 103                         interrupts = <1 13 0>;
 104                         interrupt-parent = <&mpc5200_pic>;
 105                 };
 106
 107                 timer@650 {     // General Purpose Timer
 108                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 109                         cell-index = <5>;
 110                         reg = <0x650 0x10>;
 111                         interrupts = <1 14 0>;
 112                         interrupt-parent = <&mpc5200_pic>;
 113                 };
 114
 115                 timer@660 {     // General Purpose Timer
 116                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 117                         cell-index = <6>;
 118                         reg = <0x660 0x10>;
 119                         interrupts = <1 15 0>;
 120                         interrupt-parent = <&mpc5200_pic>;
 121                 };
 122
 123                 timer@670 {     // General Purpose Timer
 124                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 125                         cell-index = <7>;
 126                         reg = <0x670 0x10>;
 127                         interrupts = <1 16 0>;
 128                         interrupt-parent = <&mpc5200_pic>;
 129                 };
 130
 131                 rtc@800 {       // Real time clock
 132                         compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
 133                         device_type = "rtc";
 134                         reg = <0x800 0x100>;
 135                         interrupts = <1 5 0 1 6 0>;
 136                         interrupt-parent = <&mpc5200_pic>;
 137                 };
 138
 139                 can@900 {
 140                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 141                         cell-index = <0>;
 142                         interrupts = <2 17 0>;
 143                         interrupt-parent = <&mpc5200_pic>;
 144                         reg = <0x900 0x80>;
 145                 };
 146
 147                 can@980 {
 148                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 149                         cell-index = <1>;
 150                         interrupts = <2 18 0>;
 151                         interrupt-parent = <&mpc5200_pic>;
 152                         reg = <0x980 0x80>;
 153                 };
 154
 155                 gpio@b00 {
 156                         compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
 157                         reg = <0xb00 0x40>;
 158                         interrupts = <1 7 0>;
 159                         interrupt-parent = <&mpc5200_pic>;
 160                 };
 161
 162                 gpio@c00 {
 163                         compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
 164                         reg = <0xc00 0x40>;
 165                         interrupts = <1 8 0 0 3 0>;
 166                         interrupt-parent = <&mpc5200_pic>;
 167                 };
 168
 169                 spi@f00 {
 170                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 171                         reg = <0xf00 0x20>;
 172                         interrupts = <2 13 0 2 14 0>;
 173                         interrupt-parent = <&mpc5200_pic>;
 174                 };
 175
 176                 usb@1000 {
 177                         compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
 178                         reg = <0x1000 0xff>;
 179                         interrupts = <2 6 0>;
 180                         interrupt-parent = <&mpc5200_pic>;
 181                 };
 182
 183                 dma-controller@1200 {
 184                         device_type = "dma-controller";
 185                         compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
 186                         reg = <0x1200 0x80>;
 187                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 188                                       3 4 0  3 5 0  3 6 0  3 7 0
 189                                       3 8 0  3 9 0  3 10 0  3 11 0
 190                                       3 12 0  3 13 0  3 14 0  3 15 0>;
 191                         interrupt-parent = <&mpc5200_pic>;
 192                 };
 193
 194                 xlb@1f00 {
 195                         compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
 196                         reg = <0x1f00 0x100>;
 197                 };
 198
 199                 serial@2000 {           // PSC1
 200                         device_type = "serial";
 201                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 202                         port-number = <0>;  // Logical port assignment
 203                         cell-index = <0>;
 204                         reg = <0x2000 0x100>;
 205                         interrupts = <2 1 0>;
 206                         interrupt-parent = <&mpc5200_pic>;
 207                 };
 208
 209                 // PSC2 in ac97 mode example
 210                 //ac97@2200 {           // PSC2
 211                 //      compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 212                 //      cell-index = <1>;
 213                 //      reg = <0x2200 0x100>;
 214                 //      interrupts = <2 2 0>;
 215                 //      interrupt-parent = <&mpc5200_pic>;
 216                 //};
 217
 218                 // PSC3 in CODEC mode example
 219                 //i2s@2400 {            // PSC3
 220                 //      compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
 221                 //      cell-index = <2>;
 222                 //      reg = <0x2400 0x100>;
 223                 //      interrupts = <2 3 0>;
 224                 //      interrupt-parent = <&mpc5200_pic>;
 225                 //};
 226
 227                 // PSC4 in uart mode example
 228                 //serial@2600 {         // PSC4
 229                 //      device_type = "serial";
 230                 //      compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 231                 //      cell-index = <3>;
 232                 //      reg = <0x2600 0x100>;
 233                 //      interrupts = <2 11 0>;
 234                 //      interrupt-parent = <&mpc5200_pic>;
 235                 //};
 236
 237                 // PSC5 in uart mode example
 238                 //serial@2800 {         // PSC5
 239                 //      device_type = "serial";
 240                 //      compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 241                 //      cell-index = <4>;
 242                 //      reg = <0x2800 0x100>;
 243                 //      interrupts = <2 12 0>;
 244                 //      interrupt-parent = <&mpc5200_pic>;
 245                 //};
 246
 247                 // PSC6 in spi mode example
 248                 //spi@2c00 {            // PSC6
 249                 //      compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 250                 //      cell-index = <5>;
 251                 //      reg = <0x2c00 0x100>;
 252                 //      interrupts = <2 4 0>;
 253                 //      interrupt-parent = <&mpc5200_pic>;
 254                 //};
 255
 256                 ethernet@3000 {
 257                         device_type = "network";
 258                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 259                         reg = <0x3000 0x400>;
 260                         local-mac-address = [ 00 00 00 00 00 00 ];
 261                         interrupts = <2 5 0>;
 262                         interrupt-parent = <&mpc5200_pic>;
 263                         phy-handle = <&phy0>;
 264                 };
 265
 266                 mdio@3000 {
 267                         #address-cells = <1>;
 268                         #size-cells = <0>;
 269                         compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
 270                         reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
 271                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 272                         interrupt-parent = <&mpc5200_pic>;
 273
 274                         phy0: ethernet-phy@0 {
 275                                 device_type = "ethernet-phy";
 276                                 reg = <0>;
 277                         };
 278                 };
 279
 280                 ata@3a00 {
 281                         device_type = "ata";
 282                         compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
 283                         reg = <0x3a00 0x100>;
 284                         interrupts = <2 7 0>;
 285                         interrupt-parent = <&mpc5200_pic>;
 286                 };
 287
 288                 i2c@3d00 {
 289                         #address-cells = <1>;
 290                         #size-cells = <0>;
 291                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 292                         cell-index = <0>;
 293                         reg = <0x3d00 0x40>;
 294                         interrupts = <2 15 0>;
 295                         interrupt-parent = <&mpc5200_pic>;
 296                         fsl5200-clocking;
 297                 };
 298
 299                 i2c@3d40 {
 300                         #address-cells = <1>;
 301                         #size-cells = <0>;
 302                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 303                         cell-index = <1>;
 304                         reg = <0x3d40 0x40>;
 305                         interrupts = <2 16 0>;
 306                         interrupt-parent = <&mpc5200_pic>;
 307                         fsl5200-clocking;
 308                 };
 309                 sram@8000 {
 310                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
 311                         reg = <0x8000 0x4000>;
 312                 };
 313         };
 314
 315         pci@f0000d00 {
 316                 #interrupt-cells = <1>;
 317                 #size-cells = <2>;
 318                 #address-cells = <3>;
 319                 device_type = "pci";
 320                 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
 321                 reg = <0xf0000d00 0x100>;
 322                 interrupt-map-mask = <0xf800 0 0 7>;
 323                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 324                                  0xc000 0 0 2 &mpc5200_pic 1 1 3
 325                                  0xc000 0 0 3 &mpc5200_pic 1 2 3
 326                                  0xc000 0 0 4 &mpc5200_pic 1 3 3
 327
 328                                  0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
 329                                  0xc800 0 0 2 &mpc5200_pic 1 2 3
 330                                  0xc800 0 0 3 &mpc5200_pic 1 3 3
 331                                  0xc800 0 0 4 &mpc5200_pic 0 0 3>;
 332                 clock-frequency = <0>; // From boot loader
 333                 interrupts = <2 8 0 2 9 0 2 10 0>;
 334                 interrupt-parent = <&mpc5200_pic>;
 335                 bus-range = <0 0>;
 336                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 337                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 338                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 339         };
 340 };