git.oblomov.eu Git - linux-2.6/blob - drivers/char/riscom8.c

   1 /*
   2  *      linux/drivers/char/riscom.c  -- RISCom/8 multiport serial driver.
   3  *
   4  *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
   5  *
   6  *      This code is loosely based on the Linux serial driver, written by
   7  *      Linus Torvalds, Theodore T'so and others. The RISCom/8 card
   8  *      programming info was obtained from various drivers for other OSes
   9  *      (FreeBSD, ISC, etc), but no source code from those drivers were
  10  *      directly included in this driver.
  11  *
  12  *
  13  *      This program is free software; you can redistribute it and/or modify
  14  *      it under the terms of the GNU General Public License as published by
  15  *      the Free Software Foundation; either version 2 of the License, or
  16  *      (at your option) any later version.
  17  *
  18  *      This program is distributed in the hope that it will be useful,
  19  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *      GNU General Public License for more details.
  22  *
  23  *      You should have received a copy of the GNU General Public License
  24  *      along with this program; if not, write to the Free Software
  25  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  *      Revision 1.1
  28  *
  29  *      ChangeLog:
  30  *      Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
  31  *      - get rid of check_region and several cleanups
  32  */
  33
  34 #include <linux/module.h>
  35
  36 #include <linux/io.h>
  37 #include <linux/kernel.h>
  38 #include <linux/sched.h>
  39 #include <linux/ioport.h>
  40 #include <linux/interrupt.h>
  41 #include <linux/errno.h>
  42 #include <linux/tty.h>
  43 #include <linux/mm.h>
  44 #include <linux/serial.h>
  45 #include <linux/fcntl.h>
  46 #include <linux/major.h>
  47 #include <linux/init.h>
  48 #include <linux/delay.h>
  49 #include <linux/tty_flip.h>
  50 #include <linux/spinlock.h>
  51 #include <linux/device.h>
  52
  53 #include <linux/uaccess.h>
  54
  55 #include "riscom8.h"
  56 #include "riscom8_reg.h"
  57
  58 /* Am I paranoid or not ? ;-) */
  59 #define RISCOM_PARANOIA_CHECK
  60
  61 /*
  62  * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals.
  63  * You can slightly speed up things by #undefing the following option,
  64  * if you are REALLY sure that your board is correct one.
  65  */
  66
  67 #define RISCOM_BRAIN_DAMAGED_CTS
  68
  69 /*
  70  * The following defines are mostly for testing purposes. But if you need
  71  * some nice reporting in your syslog, you can define them also.
  72  */
  73 #undef RC_REPORT_FIFO
  74 #undef RC_REPORT_OVERRUN
  75
  76
  77 #define RISCOM_LEGAL_FLAGS \
  78         (ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
  79          ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
  80          ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
  81
  82 static struct tty_driver *riscom_driver;
  83
  84 static DEFINE_SPINLOCK(riscom_lock);
  85
  86 static struct riscom_board rc_board[RC_NBOARD] =  {
  87         {
  88                 .base   = RC_IOBASE1,
  89         },
  90         {
  91                 .base   = RC_IOBASE2,
  92         },
  93         {
  94                 .base   = RC_IOBASE3,
  95         },
  96         {
  97                 .base   = RC_IOBASE4,
  98         },
  99 };
 100
 101 static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
 102
 103 /* RISCom/8 I/O ports addresses (without address translation) */
 104 static unsigned short rc_ioport[] =  {
 105 #if 1
 106         0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
 107 #else
 108         0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
 109         0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
 110         0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
 111 #endif
 112 };
 113 #define RC_NIOPORT      ARRAY_SIZE(rc_ioport)
 114
 115
 116 static int rc_paranoia_check(struct riscom_port const *port,
 117                                     char *name, const char *routine)
 118 {
 119 #ifdef RISCOM_PARANOIA_CHECK
 120         static const char badmagic[] = KERN_INFO
 121                 "rc: Warning: bad riscom port magic number for device %s in %s\n";
 122         static const char badinfo[] = KERN_INFO
 123                 "rc: Warning: null riscom port for device %s in %s\n";
 124
 125         if (!port) {
 126                 printk(badinfo, name, routine);
 127                 return 1;
 128         }
 129         if (port->magic != RISCOM8_MAGIC) {
 130                 printk(badmagic, name, routine);
 131                 return 1;
 132         }
 133 #endif
 134         return 0;
 135 }
 136
 137 /*
 138  *
 139  *  Service functions for RISCom/8 driver.
 140  *
 141  */
 142
 143 /* Get board number from pointer */
 144 static inline int board_No(struct riscom_board const *bp)
 145 {
 146         return bp - rc_board;
 147 }
 148
 149 /* Get port number from pointer */
 150 static inline int port_No(struct riscom_port const *port)
 151 {
 152         return RC_PORT(port - rc_port);
 153 }
 154
 155 /* Get pointer to board from pointer to port */
 156 static inline struct riscom_board *port_Board(struct riscom_port const *port)
 157 {
 158         return &rc_board[RC_BOARD(port - rc_port)];
 159 }
 160
 161 /* Input Byte from CL CD180 register */
 162 static inline unsigned char rc_in(struct riscom_board const *bp,
 163                                                         unsigned short reg)
 164 {
 165         return inb(bp->base + RC_TO_ISA(reg));
 166 }
 167
 168 /* Output Byte to CL CD180 register */
 169 static inline void rc_out(struct riscom_board const *bp, unsigned short reg,
 170                           unsigned char val)
 171 {
 172         outb(val, bp->base + RC_TO_ISA(reg));
 173 }
 174
 175 /* Wait for Channel Command Register ready */
 176 static void rc_wait_CCR(struct riscom_board const *bp)
 177 {
 178         unsigned long delay;
 179
 180         /* FIXME: need something more descriptive then 100000 :) */
 181         for (delay = 100000; delay; delay--)
 182                 if (!rc_in(bp, CD180_CCR))
 183                         return;
 184
 185         printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
 186 }
 187
 188 /*
 189  *  RISCom/8 probe functions.
 190  */
 191
 192 static int rc_request_io_range(struct riscom_board * const bp)
 193 {
 194         int i;
 195
 196         for (i = 0; i < RC_NIOPORT; i++)
 197                 if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
 198                                    "RISCom/8"))  {
 199                         goto out_release;
 200                 }
 201         return 0;
 202 out_release:
 203         printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
 204                          board_No(bp), bp->base);
 205         while (--i >= 0)
 206                 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
 207         return 1;
 208 }
 209
 210 static void rc_release_io_range(struct riscom_board * const bp)
 211 {
 212         int i;
 213
 214         for (i = 0; i < RC_NIOPORT; i++)
 215                 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
 216 }
 217
 218 /* Reset and setup CD180 chip */
 219 static void __init rc_init_CD180(struct riscom_board const *bp)
 220 {
 221         unsigned long flags;
 222
 223         spin_lock_irqsave(&riscom_lock, flags);
 224
 225         rc_out(bp, RC_CTOUT, 0);                   /* Clear timeout        */
 226         rc_wait_CCR(bp);                           /* Wait for CCR ready   */
 227         rc_out(bp, CD180_CCR, CCR_HARDRESET);      /* Reset CD180 chip     */
 228         spin_unlock_irqrestore(&riscom_lock, flags);
 229         msleep(50);                                /* Delay 0.05 sec       */
 230         spin_lock_irqsave(&riscom_lock, flags);
 231         rc_out(bp, CD180_GIVR, RC_ID);             /* Set ID for this chip */
 232         rc_out(bp, CD180_GICR, 0);                 /* Clear all bits       */
 233         rc_out(bp, CD180_PILR1, RC_ACK_MINT);      /* Prio for modem intr  */
 234         rc_out(bp, CD180_PILR2, RC_ACK_TINT);      /* Prio for tx intr     */
 235         rc_out(bp, CD180_PILR3, RC_ACK_RINT);      /* Prio for rx intr     */
 236
 237         /* Setting up prescaler. We need 4 ticks per 1 ms */
 238         rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
 239         rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
 240
 241         spin_unlock_irqrestore(&riscom_lock, flags);
 242 }
 243
 244 /* Main probing routine, also sets irq. */
 245 static int __init rc_probe(struct riscom_board *bp)
 246 {
 247         unsigned char val1, val2;
 248         int irqs = 0;
 249         int retries;
 250
 251         bp->irq = 0;
 252
 253         if (rc_request_io_range(bp))
 254                 return 1;
 255
 256         /* Are the I/O ports here ? */
 257         rc_out(bp, CD180_PPRL, 0x5a);
 258         outb(0xff, 0x80);
 259         val1 = rc_in(bp, CD180_PPRL);
 260         rc_out(bp, CD180_PPRL, 0xa5);
 261         outb(0x00, 0x80);
 262         val2 = rc_in(bp, CD180_PPRL);
 263
 264         if ((val1 != 0x5a) || (val2 != 0xa5))  {
 265                 printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
 266                        board_No(bp), bp->base);
 267                 goto out_release;
 268         }
 269
 270         /* It's time to find IRQ for this board */
 271         for (retries = 0; retries < 5 && irqs <= 0; retries++) {
 272                 irqs = probe_irq_on();
 273                 rc_init_CD180(bp);               /* Reset CD180 chip         */
 274                 rc_out(bp, CD180_CAR, 2);        /* Select port 2            */
 275                 rc_wait_CCR(bp);
 276                 rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter       */
 277                 rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr     */
 278                 msleep(50);
 279                 irqs = probe_irq_off(irqs);
 280                 val1 = rc_in(bp, RC_BSR);       /* Get Board Status reg      */
 281                 val2 = rc_in(bp, RC_ACK_TINT);  /* ACK interrupt             */
 282                 rc_init_CD180(bp);              /* Reset CD180 again         */
 283
 284                 if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX)))  {
 285                         printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
 286                                         "found.\n", board_No(bp), bp->base);
 287                         goto out_release;
 288                 }
 289         }
 290
 291         if (irqs <= 0)  {
 292                 printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
 293                                 "at 0x%03x.\n", board_No(bp), bp->base);
 294                 goto out_release;
 295         }
 296         bp->irq = irqs;
 297         bp->flags |= RC_BOARD_PRESENT;
 298
 299         printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
 300                          "0x%03x, IRQ %d.\n",
 301                board_No(bp),
 302                (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A',   /* Board revision */
 303                bp->base, bp->irq);
 304
 305         return 0;
 306 out_release:
 307         rc_release_io_range(bp);
 308         return 1;
 309 }
 310
 311 /*
 312  *
 313  *  Interrupt processing routines.
 314  *
 315  */
 316
 317 static struct riscom_port *rc_get_port(struct riscom_board const *bp,
 318                                                unsigned char const *what)
 319 {
 320         unsigned char channel;
 321         struct riscom_port *port;
 322
 323         channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
 324         if (channel < CD180_NCH)  {
 325                 port = &rc_port[board_No(bp) * RC_NPORT + channel];
 326                 if (port->port.flags & ASYNC_INITIALIZED)
 327                         return port;
 328         }
 329         printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
 330                board_No(bp), what, channel);
 331         return NULL;
 332 }
 333
 334 static void rc_receive_exc(struct riscom_board const *bp)
 335 {
 336         struct riscom_port *port;
 337         struct tty_struct *tty;
 338         unsigned char status;
 339         unsigned char ch, flag;
 340
 341         port = rc_get_port(bp, "Receive");
 342         if (port == NULL)
 343                 return;
 344
 345         tty = port->port.tty;
 346
 347 #ifdef RC_REPORT_OVERRUN
 348         status = rc_in(bp, CD180_RCSR);
 349         if (status & RCSR_OE)
 350                 port->overrun++;
 351         status &= port->mark_mask;
 352 #else
 353         status = rc_in(bp, CD180_RCSR) & port->mark_mask;
 354 #endif
 355         ch = rc_in(bp, CD180_RDR);
 356         if (!status)
 357                 return;
 358         if (status & RCSR_TOUT)  {
 359                 printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
 360                                     "Hardware problems ?\n",
 361                        board_No(bp), port_No(port));
 362                 return;
 363
 364         } else if (status & RCSR_BREAK)  {
 365                 printk(KERN_INFO "rc%d: port %d: Handling break...\n",
 366                        board_No(bp), port_No(port));
 367                 flag = TTY_BREAK;
 368                 if (port->port.flags & ASYNC_SAK)
 369                         do_SAK(tty);
 370
 371         } else if (status & RCSR_PE)
 372                 flag = TTY_PARITY;
 373
 374         else if (status & RCSR_FE)
 375                 flag = TTY_FRAME;
 376
 377         else if (status & RCSR_OE)
 378                 flag = TTY_OVERRUN;
 379         else
 380                 flag = TTY_NORMAL;
 381
 382         tty_insert_flip_char(tty, ch, flag);
 383         tty_flip_buffer_push(tty);
 384 }
 385
 386 static void rc_receive(struct riscom_board const *bp)
 387 {
 388         struct riscom_port *port;
 389         struct tty_struct *tty;
 390         unsigned char count;
 391
 392         port = rc_get_port(bp, "Receive");
 393         if (port == NULL)
 394                 return;
 395
 396         tty = port->port.tty;
 397
 398         count = rc_in(bp, CD180_RDCR);
 399
 400 #ifdef RC_REPORT_FIFO
 401         port->hits[count > 8 ? 9 : count]++;
 402 #endif
 403
 404         while (count--)  {
 405                 if (tty_buffer_request_room(tty, 1) == 0)  {
 406                         printk(KERN_WARNING "rc%d: port %d: Working around "
 407                                             "flip buffer overflow.\n",
 408                                board_No(bp), port_No(port));
 409                         break;
 410                 }
 411                 tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
 412         }
 413         tty_flip_buffer_push(tty);
 414 }
 415
 416 static void rc_transmit(struct riscom_board const *bp)
 417 {
 418         struct riscom_port *port;
 419         struct tty_struct *tty;
 420         unsigned char count;
 421
 422         port = rc_get_port(bp, "Transmit");
 423         if (port == NULL)
 424                 return;
 425
 426         tty = port->port.tty;
 427
 428         if (port->IER & IER_TXEMPTY) {
 429                 /* FIFO drained */
 430                 rc_out(bp, CD180_CAR, port_No(port));
 431                 port->IER &= ~IER_TXEMPTY;
 432                 rc_out(bp, CD180_IER, port->IER);
 433                 return;
 434         }
 435
 436         if ((port->xmit_cnt <= 0 && !port->break_length)
 437             || tty->stopped || tty->hw_stopped)  {
 438                 rc_out(bp, CD180_CAR, port_No(port));
 439                 port->IER &= ~IER_TXRDY;
 440                 rc_out(bp, CD180_IER, port->IER);
 441                 return;
 442         }
 443
 444         if (port->break_length)  {
 445                 if (port->break_length > 0)  {
 446                         if (port->COR2 & COR2_ETC)  {
 447                                 rc_out(bp, CD180_TDR, CD180_C_ESC);
 448                                 rc_out(bp, CD180_TDR, CD180_C_SBRK);
 449                                 port->COR2 &= ~COR2_ETC;
 450                         }
 451                         count = min_t(int, port->break_length, 0xff);
 452                         rc_out(bp, CD180_TDR, CD180_C_ESC);
 453                         rc_out(bp, CD180_TDR, CD180_C_DELAY);
 454                         rc_out(bp, CD180_TDR, count);
 455                         port->break_length -= count;
 456                         if (port->break_length == 0)
 457                                 port->break_length--;
 458                 } else  {
 459                         rc_out(bp, CD180_TDR, CD180_C_ESC);
 460                         rc_out(bp, CD180_TDR, CD180_C_EBRK);
 461                         rc_out(bp, CD180_COR2, port->COR2);
 462                         rc_wait_CCR(bp);
 463                         rc_out(bp, CD180_CCR, CCR_CORCHG2);
 464                         port->break_length = 0;
 465                 }
 466                 return;
 467         }
 468
 469         count = CD180_NFIFO;
 470         do {
 471                 rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]);
 472                 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
 473                 if (--port->xmit_cnt <= 0)
 474                         break;
 475         } while (--count > 0);
 476
 477         if (port->xmit_cnt <= 0)  {
 478                 rc_out(bp, CD180_CAR, port_No(port));
 479                 port->IER &= ~IER_TXRDY;
 480                 rc_out(bp, CD180_IER, port->IER);
 481         }
 482         if (port->xmit_cnt <= port->wakeup_chars)
 483                 tty_wakeup(tty);
 484 }
 485
 486 static void rc_check_modem(struct riscom_board const *bp)
 487 {
 488         struct riscom_port *port;
 489         struct tty_struct *tty;
 490         unsigned char mcr;
 491
 492         port = rc_get_port(bp, "Modem");
 493         if (port == NULL)
 494                 return;
 495
 496         tty = port->port.tty;
 497
 498         mcr = rc_in(bp, CD180_MCR);
 499         if (mcr & MCR_CDCHG) {
 500                 if (rc_in(bp, CD180_MSVR) & MSVR_CD)
 501                         wake_up_interruptible(&port->port.open_wait);
 502                 else
 503                         tty_hangup(tty);
 504         }
 505
 506 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 507         if (mcr & MCR_CTSCHG)  {
 508                 if (rc_in(bp, CD180_MSVR) & MSVR_CTS)  {
 509                         tty->hw_stopped = 0;
 510                         port->IER |= IER_TXRDY;
 511                         if (port->xmit_cnt <= port->wakeup_chars)
 512                                 tty_wakeup(tty);
 513                 } else  {
 514                         tty->hw_stopped = 1;
 515                         port->IER &= ~IER_TXRDY;
 516                 }
 517                 rc_out(bp, CD180_IER, port->IER);
 518         }
 519         if (mcr & MCR_DSRCHG)  {
 520                 if (rc_in(bp, CD180_MSVR) & MSVR_DSR)  {
 521                         tty->hw_stopped = 0;
 522                         port->IER |= IER_TXRDY;
 523                         if (port->xmit_cnt <= port->wakeup_chars)
 524                                 tty_wakeup(tty);
 525                 } else  {
 526                         tty->hw_stopped = 1;
 527                         port->IER &= ~IER_TXRDY;
 528                 }
 529                 rc_out(bp, CD180_IER, port->IER);
 530         }
 531 #endif /* RISCOM_BRAIN_DAMAGED_CTS */
 532
 533         /* Clear change bits */
 534         rc_out(bp, CD180_MCR, 0);
 535 }
 536
 537 /* The main interrupt processing routine */
 538 static irqreturn_t rc_interrupt(int dummy, void *dev_id)
 539 {
 540         unsigned char status;
 541         unsigned char ack;
 542         struct riscom_board *bp = dev_id;
 543         unsigned long loop = 0;
 544         int handled = 0;
 545
 546         if (!(bp->flags & RC_BOARD_ACTIVE))
 547                 return IRQ_NONE;
 548
 549         while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
 550                                  (RC_BSR_TOUT | RC_BSR_TINT |
 551                                   RC_BSR_MINT | RC_BSR_RINT))) {
 552                 handled = 1;
 553                 if (status & RC_BSR_TOUT)
 554                         printk(KERN_WARNING "rc%d: Got timeout. Hardware "
 555                                             "error?\n", board_No(bp));
 556                 else if (status & RC_BSR_RINT) {
 557                         ack = rc_in(bp, RC_ACK_RINT);
 558                         if (ack == (RC_ID | GIVR_IT_RCV))
 559                                 rc_receive(bp);
 560                         else if (ack == (RC_ID | GIVR_IT_REXC))
 561                                 rc_receive_exc(bp);
 562                         else
 563                                 printk(KERN_WARNING "rc%d: Bad receive ack "
 564                                                     "0x%02x.\n",
 565                                        board_No(bp), ack);
 566                 } else if (status & RC_BSR_TINT) {
 567                         ack = rc_in(bp, RC_ACK_TINT);
 568                         if (ack == (RC_ID | GIVR_IT_TX))
 569                                 rc_transmit(bp);
 570                         else
 571                                 printk(KERN_WARNING "rc%d: Bad transmit ack "
 572                                                     "0x%02x.\n",
 573                                        board_No(bp), ack);
 574                 } else /* if (status & RC_BSR_MINT) */ {
 575                         ack = rc_in(bp, RC_ACK_MINT);
 576                         if (ack == (RC_ID | GIVR_IT_MODEM))
 577                                 rc_check_modem(bp);
 578                         else
 579                                 printk(KERN_WARNING "rc%d: Bad modem ack "
 580                                                     "0x%02x.\n",
 581                                        board_No(bp), ack);
 582                 }
 583                 rc_out(bp, CD180_EOIR, 0);   /* Mark end of interrupt */
 584                 rc_out(bp, RC_CTOUT, 0);     /* Clear timeout flag    */
 585         }
 586         return IRQ_RETVAL(handled);
 587 }
 588
 589 /*
 590  *  Routines for open & close processing.
 591  */
 592
 593 /* Called with disabled interrupts */
 594 static int rc_setup_board(struct riscom_board *bp)
 595 {
 596         int error;
 597
 598         if (bp->flags & RC_BOARD_ACTIVE)
 599                 return 0;
 600
 601         error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
 602                             "RISCom/8", bp);
 603         if (error)
 604                 return error;
 605
 606         rc_out(bp, RC_CTOUT, 0);                /* Just in case         */
 607         bp->DTR = ~0;
 608         rc_out(bp, RC_DTR, bp->DTR);            /* Drop DTR on all ports */
 609
 610         bp->flags |= RC_BOARD_ACTIVE;
 611
 612         return 0;
 613 }
 614
 615 /* Called with disabled interrupts */
 616 static void rc_shutdown_board(struct riscom_board *bp)
 617 {
 618         if (!(bp->flags & RC_BOARD_ACTIVE))
 619                 return;
 620
 621         bp->flags &= ~RC_BOARD_ACTIVE;
 622
 623         free_irq(bp->irq, NULL);
 624
 625         bp->DTR = ~0;
 626         rc_out(bp, RC_DTR, bp->DTR);           /* Drop DTR on all ports */
 627
 628 }
 629
 630 /*
 631  * Setting up port characteristics.
 632  * Must be called with disabled interrupts
 633  */
 634 static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
 635 {
 636         struct tty_struct *tty = port->port.tty;
 637         unsigned long baud;
 638         long tmp;
 639         unsigned char cor1 = 0, cor3 = 0;
 640         unsigned char mcor1 = 0, mcor2 = 0;
 641
 642         port->IER  = 0;
 643         port->COR2 = 0;
 644         port->MSVR = MSVR_RTS;
 645
 646         baud = tty_get_baud_rate(tty);
 647
 648         /* Select port on the board */
 649         rc_out(bp, CD180_CAR, port_No(port));
 650
 651         if (!baud)  {
 652                 /* Drop DTR & exit */
 653                 bp->DTR |= (1u << port_No(port));
 654                 rc_out(bp, RC_DTR, bp->DTR);
 655                 return;
 656         } else  {
 657                 /* Set DTR on */
 658                 bp->DTR &= ~(1u << port_No(port));
 659                 rc_out(bp, RC_DTR, bp->DTR);
 660         }
 661
 662         /*
 663          * Now we must calculate some speed depended things
 664          */
 665
 666         /* Set baud rate for port */
 667         tmp = (((RC_OSCFREQ + baud/2) / baud +
 668                 CD180_TPC/2) / CD180_TPC);
 669
 670         rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
 671         rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
 672         rc_out(bp, CD180_RBPRL, tmp & 0xff);
 673         rc_out(bp, CD180_TBPRL, tmp & 0xff);
 674
 675         baud = (baud + 5) / 10;   /* Estimated CPS */
 676
 677         /* Two timer ticks seems enough to wakeup something like SLIP driver */
 678         tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
 679         port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
 680                                               SERIAL_XMIT_SIZE - 1 : tmp);
 681
 682         /* Receiver timeout will be transmission time for 1.5 chars */
 683         tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
 684         tmp = (tmp > 0xff) ? 0xff : tmp;
 685         rc_out(bp, CD180_RTPR, tmp);
 686
 687         switch (C_CSIZE(tty)) {
 688         case CS5:
 689                 cor1 |= COR1_5BITS;
 690                 break;
 691         case CS6:
 692                 cor1 |= COR1_6BITS;
 693                 break;
 694         case CS7:
 695                 cor1 |= COR1_7BITS;
 696                 break;
 697         case CS8:
 698                 cor1 |= COR1_8BITS;
 699                 break;
 700         }
 701         if (C_CSTOPB(tty))
 702                 cor1 |= COR1_2SB;
 703
 704         cor1 |= COR1_IGNORE;
 705         if (C_PARENB(tty)) {
 706                 cor1 |= COR1_NORMPAR;
 707                 if (C_PARODD(tty))
 708                         cor1 |= COR1_ODDP;
 709                 if (I_INPCK(tty))
 710                         cor1 &= ~COR1_IGNORE;
 711         }
 712         /* Set marking of some errors */
 713         port->mark_mask = RCSR_OE | RCSR_TOUT;
 714         if (I_INPCK(tty))
 715                 port->mark_mask |= RCSR_FE | RCSR_PE;
 716         if (I_BRKINT(tty) || I_PARMRK(tty))
 717                 port->mark_mask |= RCSR_BREAK;
 718         if (I_IGNPAR(tty))
 719                 port->mark_mask &= ~(RCSR_FE | RCSR_PE);
 720         if (I_IGNBRK(tty)) {
 721                 port->mark_mask &= ~RCSR_BREAK;
 722                 if (I_IGNPAR(tty))
 723                         /* Real raw mode. Ignore all */
 724                         port->mark_mask &= ~RCSR_OE;
 725         }
 726         /* Enable Hardware Flow Control */
 727         if (C_CRTSCTS(tty))  {
 728 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 729                 port->IER |= IER_DSR | IER_CTS;
 730                 mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
 731                 mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
 732                 tty->hw_stopped = !(rc_in(bp, CD180_MSVR) &
 733                                                 (MSVR_CTS|MSVR_DSR));
 734 #else
 735                 port->COR2 |= COR2_CTSAE;
 736 #endif
 737         }
 738         /* Enable Software Flow Control. FIXME: I'm not sure about this */
 739         /* Some people reported that it works, but I still doubt */
 740         if (I_IXON(tty))  {
 741                 port->COR2 |= COR2_TXIBE;
 742                 cor3 |= (COR3_FCT | COR3_SCDE);
 743                 if (I_IXANY(tty))
 744                         port->COR2 |= COR2_IXM;
 745                 rc_out(bp, CD180_SCHR1, START_CHAR(tty));
 746                 rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
 747                 rc_out(bp, CD180_SCHR3, START_CHAR(tty));
 748                 rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
 749         }
 750         if (!C_CLOCAL(tty))  {
 751                 /* Enable CD check */
 752                 port->IER |= IER_CD;
 753                 mcor1 |= MCOR1_CDZD;
 754                 mcor2 |= MCOR2_CDOD;
 755         }
 756
 757         if (C_CREAD(tty))
 758                 /* Enable receiver */
 759                 port->IER |= IER_RXD;
 760
 761         /* Set input FIFO size (1-8 bytes) */
 762         cor3 |= RISCOM_RXFIFO;
 763         /* Setting up CD180 channel registers */
 764         rc_out(bp, CD180_COR1, cor1);
 765         rc_out(bp, CD180_COR2, port->COR2);
 766         rc_out(bp, CD180_COR3, cor3);
 767         /* Make CD180 know about registers change */
 768         rc_wait_CCR(bp);
 769         rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
 770         /* Setting up modem option registers */
 771         rc_out(bp, CD180_MCOR1, mcor1);
 772         rc_out(bp, CD180_MCOR2, mcor2);
 773         /* Enable CD180 transmitter & receiver */
 774         rc_wait_CCR(bp);
 775         rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
 776         /* Enable interrupts */
 777         rc_out(bp, CD180_IER, port->IER);
 778         /* And finally set RTS on */
 779         rc_out(bp, CD180_MSVR, port->MSVR);
 780 }
 781
 782 /* Must be called with interrupts enabled */
 783 static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
 784 {
 785         unsigned long flags;
 786
 787         if (port->port.flags & ASYNC_INITIALIZED)
 788                 return 0;
 789
 790         if (tty_port_alloc_xmit_buf(&port->port) < 0)
 791                 return -ENOMEM;
 792
 793         spin_lock_irqsave(&riscom_lock, flags);
 794
 795         clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
 796         if (port->port.count == 1)
 797                 bp->count++;
 798         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 799         rc_change_speed(bp, port);
 800         port->port.flags |= ASYNC_INITIALIZED;
 801
 802         spin_unlock_irqrestore(&riscom_lock, flags);
 803         return 0;
 804 }
 805
 806 /* Must be called with interrupts disabled */
 807 static void rc_shutdown_port(struct tty_struct *tty,
 808                         struct riscom_board *bp, struct riscom_port *port)
 809 {
 810         if (!(port->port.flags & ASYNC_INITIALIZED))
 811                 return;
 812
 813 #ifdef RC_REPORT_OVERRUN
 814         printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
 815                board_No(bp), port_No(port), port->overrun);
 816 #endif
 817 #ifdef RC_REPORT_FIFO
 818         {
 819                 int i;
 820
 821                 printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
 822                        board_No(bp), port_No(port));
 823                 for (i = 0; i < 10; i++)
 824                         printk("%ld ", port->hits[i]);
 825                 printk("].\n");
 826         }
 827 #endif
 828         tty_port_free_xmit_buf(&port->port);
 829         if (C_HUPCL(tty)) {
 830                 /* Drop DTR */
 831                 bp->DTR |= (1u << port_No(port));
 832                 rc_out(bp, RC_DTR, bp->DTR);
 833         }
 834
 835         /* Select port */
 836         rc_out(bp, CD180_CAR, port_No(port));
 837         /* Reset port */
 838         rc_wait_CCR(bp);
 839         rc_out(bp, CD180_CCR, CCR_SOFTRESET);
 840         /* Disable all interrupts from this port */
 841         port->IER = 0;
 842         rc_out(bp, CD180_IER, port->IER);
 843
 844         set_bit(TTY_IO_ERROR, &tty->flags);
 845         port->port.flags &= ~ASYNC_INITIALIZED;
 846
 847         if (--bp->count < 0)  {
 848                 printk(KERN_INFO "rc%d: rc_shutdown_port: "
 849                                  "bad board count: %d\n",
 850                        board_No(bp), bp->count);
 851                 bp->count = 0;
 852         }
 853         /*
 854          * If this is the last opened port on the board
 855          * shutdown whole board
 856          */
 857         if (!bp->count)
 858                 rc_shutdown_board(bp);
 859 }
 860
 861 static int carrier_raised(struct tty_port *port)
 862 {
 863         struct riscom_port *p = container_of(port, struct riscom_port, port);
 864         struct riscom_board *bp = port_Board(p);
 865         unsigned long flags;
 866         int CD;
 867
 868         spin_lock_irqsave(&riscom_lock, flags);
 869         rc_out(bp, CD180_CAR, port_No(p));
 870         CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
 871         rc_out(bp, CD180_MSVR, MSVR_RTS);
 872         bp->DTR &= ~(1u << port_No(p));
 873         rc_out(bp, RC_DTR, bp->DTR);
 874         spin_unlock_irqrestore(&riscom_lock, flags);
 875         return CD;
 876 }
 877
 878 static int rc_open(struct tty_struct *tty, struct file *filp)
 879 {
 880         int board;
 881         int error;
 882         struct riscom_port *port;
 883         struct riscom_board *bp;
 884
 885         board = RC_BOARD(tty->index);
 886         if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
 887                 return -ENODEV;
 888
 889         bp = &rc_board[board];
 890         port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
 891         if (rc_paranoia_check(port, tty->name, "rc_open"))
 892                 return -ENODEV;
 893
 894         error = rc_setup_board(bp);
 895         if (error)
 896                 return error;
 897
 898         port->port.count++;
 899         tty->driver_data = port;
 900         port->port.tty = tty;
 901
 902         error = rc_setup_port(bp, port);
 903         if (error == 0)
 904                 error = tty_port_block_til_ready(&port->port, tty, filp);
 905         return error;
 906 }
 907
 908 static void rc_flush_buffer(struct tty_struct *tty)
 909 {
 910         struct riscom_port *port = tty->driver_data;
 911         unsigned long flags;
 912
 913         if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
 914                 return;
 915
 916         spin_lock_irqsave(&riscom_lock, flags);
 917         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 918         spin_unlock_irqrestore(&riscom_lock, flags);
 919
 920         tty_wakeup(tty);
 921 }
 922
 923 static void rc_close(struct tty_struct *tty, struct file *filp)
 924 {
 925         struct riscom_port *port = tty->driver_data;
 926         struct riscom_board *bp;
 927         unsigned long flags;
 928         unsigned long timeout;
 929
 930         if (!port || rc_paranoia_check(port, tty->name, "close"))
 931                 return;
 932
 933         bp = port_Board(port);
 934
 935         if (tty_port_close_start(&port->port, tty, filp) == 0)
 936                 return;
 937
 938         /*
 939          * At this point we stop accepting input.  To do this, we
 940          * disable the receive line status interrupts, and tell the
 941          * interrupt driver to stop checking the data ready bit in the
 942          * line status register.
 943          */
 944
 945         spin_lock_irqsave(&riscom_lock, flags);
 946         port->IER &= ~IER_RXD;
 947         if (port->port.flags & ASYNC_INITIALIZED) {
 948                 port->IER &= ~IER_TXRDY;
 949                 port->IER |= IER_TXEMPTY;
 950                 rc_out(bp, CD180_CAR, port_No(port));
 951                 rc_out(bp, CD180_IER, port->IER);
 952                 /*
 953                  * Before we drop DTR, make sure the UART transmitter
 954                  * has completely drained; this is especially
 955                  * important if there is a transmit FIFO!
 956                  */
 957                 timeout = jiffies + HZ;
 958                 while (port->IER & IER_TXEMPTY) {
 959                         spin_unlock_irqrestore(&riscom_lock, flags);
 960                         msleep_interruptible(jiffies_to_msecs(port->timeout));
 961                         spin_lock_irqsave(&riscom_lock, flags);
 962                         if (time_after(jiffies, timeout))
 963                                 break;
 964                 }
 965         }
 966         rc_shutdown_port(tty, bp, port);
 967         rc_flush_buffer(tty);
 968         spin_unlock_irqrestore(&riscom_lock, flags);
 969
 970         tty_port_close_end(&port->port, tty);
 971 }
 972
 973 static int rc_write(struct tty_struct *tty,
 974                     const unsigned char *buf, int count)
 975 {
 976         struct riscom_port *port = tty->driver_data;
 977         struct riscom_board *bp;
 978         int c, total = 0;
 979         unsigned long flags;
 980
 981         if (rc_paranoia_check(port, tty->name, "rc_write"))
 982                 return 0;
 983
 984         bp = port_Board(port);
 985
 986         while (1) {
 987                 spin_lock_irqsave(&riscom_lock, flags);
 988
 989                 c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
 990                                           SERIAL_XMIT_SIZE - port->xmit_head));
 991                 if (c <= 0)
 992                         break;  /* lock continues to be held */
 993
 994                 memcpy(port->port.xmit_buf + port->xmit_head, buf, c);
 995                 port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
 996                 port->xmit_cnt += c;
 997
 998                 spin_unlock_irqrestore(&riscom_lock, flags);
 999
1000                 buf += c;
1001                 count -= c;
1002                 total += c;
1003         }
1004
1005         if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
1006             !(port->IER & IER_TXRDY)) {
1007                 port->IER |= IER_TXRDY;
1008                 rc_out(bp, CD180_CAR, port_No(port));
1009                 rc_out(bp, CD180_IER, port->IER);
1010         }
1011
1012         spin_unlock_irqrestore(&riscom_lock, flags);
1013
1014         return total;
1015 }
1016
1017 static int rc_put_char(struct tty_struct *tty, unsigned char ch)
1018 {
1019         struct riscom_port *port = tty->driver_data;
1020         unsigned long flags;
1021         int ret = 0;
1022
1023         if (rc_paranoia_check(port, tty->name, "rc_put_char"))
1024                 return 0;
1025
1026         spin_lock_irqsave(&riscom_lock, flags);
1027
1028         if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1029                 goto out;
1030
1031         port->port.xmit_buf[port->xmit_head++] = ch;
1032         port->xmit_head &= SERIAL_XMIT_SIZE - 1;
1033         port->xmit_cnt++;
1034         ret = 1;
1035
1036 out:
1037         spin_unlock_irqrestore(&riscom_lock, flags);
1038         return ret;
1039 }
1040
1041 static void rc_flush_chars(struct tty_struct *tty)
1042 {
1043         struct riscom_port *port = tty->driver_data;
1044         unsigned long flags;
1045
1046         if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
1047                 return;
1048
1049         if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped)
1050                 return;
1051
1052         spin_lock_irqsave(&riscom_lock, flags);
1053
1054         port->IER |= IER_TXRDY;
1055         rc_out(port_Board(port), CD180_CAR, port_No(port));
1056         rc_out(port_Board(port), CD180_IER, port->IER);
1057
1058         spin_unlock_irqrestore(&riscom_lock, flags);
1059 }
1060
1061 static int rc_write_room(struct tty_struct *tty)
1062 {
1063         struct riscom_port *port = tty->driver_data;
1064         int     ret;
1065
1066         if (rc_paranoia_check(port, tty->name, "rc_write_room"))
1067                 return 0;
1068
1069         ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1070         if (ret < 0)
1071                 ret = 0;
1072         return ret;
1073 }
1074
1075 static int rc_chars_in_buffer(struct tty_struct *tty)
1076 {
1077         struct riscom_port *port = tty->driver_data;
1078
1079         if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
1080                 return 0;
1081
1082         return port->xmit_cnt;
1083 }
1084
1085 static int rc_tiocmget(struct tty_struct *tty, struct file *file)
1086 {
1087         struct riscom_port *port = tty->driver_data;
1088         struct riscom_board *bp;
1089         unsigned char status;
1090         unsigned int result;
1091         unsigned long flags;
1092
1093         if (rc_paranoia_check(port, tty->name, __func__))
1094                 return -ENODEV;
1095
1096         bp = port_Board(port);
1097
1098         spin_lock_irqsave(&riscom_lock, flags);
1099
1100         rc_out(bp, CD180_CAR, port_No(port));
1101         status = rc_in(bp, CD180_MSVR);
1102         result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
1103
1104         spin_unlock_irqrestore(&riscom_lock, flags);
1105
1106         result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
1107                 | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
1108                 | ((status & MSVR_CD)  ? TIOCM_CAR : 0)
1109                 | ((status & MSVR_DSR) ? TIOCM_DSR : 0)
1110                 | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
1111         return result;
1112 }
1113
1114 static int rc_tiocmset(struct tty_struct *tty, struct file *file,
1115                        unsigned int set, unsigned int clear)
1116 {
1117         struct riscom_port *port = tty->driver_data;
1118         unsigned long flags;
1119         struct riscom_board *bp;
1120
1121         if (rc_paranoia_check(port, tty->name, __func__))
1122                 return -ENODEV;
1123
1124         bp = port_Board(port);
1125
1126         spin_lock_irqsave(&riscom_lock, flags);
1127
1128         if (set & TIOCM_RTS)
1129                 port->MSVR |= MSVR_RTS;
1130         if (set & TIOCM_DTR)
1131                 bp->DTR &= ~(1u << port_No(port));
1132
1133         if (clear & TIOCM_RTS)
1134                 port->MSVR &= ~MSVR_RTS;
1135         if (clear & TIOCM_DTR)
1136                 bp->DTR |= (1u << port_No(port));
1137
1138         rc_out(bp, CD180_CAR, port_No(port));
1139         rc_out(bp, CD180_MSVR, port->MSVR);
1140         rc_out(bp, RC_DTR, bp->DTR);
1141
1142         spin_unlock_irqrestore(&riscom_lock, flags);
1143
1144         return 0;
1145 }
1146
1147 static int rc_send_break(struct tty_struct *tty, int length)
1148 {
1149         struct riscom_port *port = tty->driver_data;
1150         struct riscom_board *bp = port_Board(port);
1151         unsigned long flags;
1152
1153         if (length == 0 || length == -1)
1154                 return -EOPNOTSUPP;
1155
1156         spin_lock_irqsave(&riscom_lock, flags);
1157
1158         port->break_length = RISCOM_TPS / HZ * length;
1159         port->COR2 |= COR2_ETC;
1160         port->IER  |= IER_TXRDY;
1161         rc_out(bp, CD180_CAR, port_No(port));
1162         rc_out(bp, CD180_COR2, port->COR2);
1163         rc_out(bp, CD180_IER, port->IER);
1164         rc_wait_CCR(bp);
1165         rc_out(bp, CD180_CCR, CCR_CORCHG2);
1166         rc_wait_CCR(bp);
1167
1168         spin_unlock_irqrestore(&riscom_lock, flags);
1169         return 0;
1170 }
1171
1172 static int rc_set_serial_info(struct riscom_port *port,
1173                                      struct serial_struct __user *newinfo)
1174 {
1175         struct serial_struct tmp;
1176         struct riscom_board *bp = port_Board(port);
1177         int change_speed;
1178
1179         if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
1180                 return -EFAULT;
1181
1182 #if 0
1183         if ((tmp.irq != bp->irq) ||
1184             (tmp.port != bp->base) ||
1185             (tmp.type != PORT_CIRRUS) ||
1186             (tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
1187             (tmp.custom_divisor != 0) ||
1188             (tmp.xmit_fifo_size != CD180_NFIFO) ||
1189             (tmp.flags & ~RISCOM_LEGAL_FLAGS))
1190                 return -EINVAL;
1191 #endif
1192
1193         change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
1194                         (tmp.flags & ASYNC_SPD_MASK));
1195
1196         if (!capable(CAP_SYS_ADMIN)) {
1197                 if ((tmp.close_delay != port->port.close_delay) ||
1198                     (tmp.closing_wait != port->port.closing_wait) ||
1199                     ((tmp.flags & ~ASYNC_USR_MASK) !=
1200                      (port->port.flags & ~ASYNC_USR_MASK)))
1201                         return -EPERM;
1202                 port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
1203                                (tmp.flags & ASYNC_USR_MASK));
1204         } else  {
1205                 port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
1206                                (tmp.flags & ASYNC_FLAGS));
1207                 port->port.close_delay = tmp.close_delay;
1208                 port->port.closing_wait = tmp.closing_wait;
1209         }
1210         if (change_speed)  {
1211                 unsigned long flags;
1212
1213                 spin_lock_irqsave(&riscom_lock, flags);
1214                 rc_change_speed(bp, port);
1215                 spin_unlock_irqrestore(&riscom_lock, flags);
1216         }
1217         return 0;
1218 }
1219
1220 static int rc_get_serial_info(struct riscom_port *port,
1221                                      struct serial_struct __user *retinfo)
1222 {
1223         struct serial_struct tmp;
1224         struct riscom_board *bp = port_Board(port);
1225
1226         memset(&tmp, 0, sizeof(tmp));
1227         tmp.type = PORT_CIRRUS;
1228         tmp.line = port - rc_port;
1229         tmp.port = bp->base;
1230         tmp.irq  = bp->irq;
1231         tmp.flags = port->port.flags;
1232         tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
1233         tmp.close_delay = port->port.close_delay * HZ/100;
1234         tmp.closing_wait = port->port.closing_wait * HZ/100;
1235         tmp.xmit_fifo_size = CD180_NFIFO;
1236         return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
1237 }
1238
1239 static int rc_ioctl(struct tty_struct *tty, struct file *filp,
1240                     unsigned int cmd, unsigned long arg)
1241 {
1242         struct riscom_port *port = tty->driver_data;
1243         void __user *argp = (void __user *)arg;
1244         int retval;
1245
1246         if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
1247                 return -ENODEV;
1248
1249         switch (cmd) {
1250         case TIOCGSERIAL:
1251                 lock_kernel();
1252                 retval = rc_get_serial_info(port, argp);
1253                 unlock_kernel();
1254                 break;
1255         case TIOCSSERIAL:
1256                 lock_kernel();
1257                 retval = rc_set_serial_info(port, argp);
1258                 unlock_kernel();
1259                 break;
1260         default:
1261                 retval = -ENOIOCTLCMD;
1262         }
1263         return retval;
1264 }
1265
1266 static void rc_throttle(struct tty_struct *tty)
1267 {
1268         struct riscom_port *port = tty->driver_data;
1269         struct riscom_board *bp;
1270         unsigned long flags;
1271
1272         if (rc_paranoia_check(port, tty->name, "rc_throttle"))
1273                 return;
1274         bp = port_Board(port);
1275
1276         spin_lock_irqsave(&riscom_lock, flags);
1277         port->MSVR &= ~MSVR_RTS;
1278         rc_out(bp, CD180_CAR, port_No(port));
1279         if (I_IXOFF(tty)) {
1280                 rc_wait_CCR(bp);
1281                 rc_out(bp, CD180_CCR, CCR_SSCH2);
1282                 rc_wait_CCR(bp);
1283         }
1284         rc_out(bp, CD180_MSVR, port->MSVR);
1285         spin_unlock_irqrestore(&riscom_lock, flags);
1286 }
1287
1288 static void rc_unthrottle(struct tty_struct *tty)
1289 {
1290         struct riscom_port *port = tty->driver_data;
1291         struct riscom_board *bp;
1292         unsigned long flags;
1293
1294         if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
1295                 return;
1296         bp = port_Board(port);
1297
1298         spin_lock_irqsave(&riscom_lock, flags);
1299         port->MSVR |= MSVR_RTS;
1300         rc_out(bp, CD180_CAR, port_No(port));
1301         if (I_IXOFF(tty))  {
1302                 rc_wait_CCR(bp);
1303                 rc_out(bp, CD180_CCR, CCR_SSCH1);
1304                 rc_wait_CCR(bp);
1305         }
1306         rc_out(bp, CD180_MSVR, port->MSVR);
1307         spin_unlock_irqrestore(&riscom_lock, flags);
1308 }
1309
1310 static void rc_stop(struct tty_struct *tty)
1311 {
1312         struct riscom_port *port = tty->driver_data;
1313         struct riscom_board *bp;
1314         unsigned long flags;
1315
1316         if (rc_paranoia_check(port, tty->name, "rc_stop"))
1317                 return;
1318
1319         bp = port_Board(port);
1320
1321         spin_lock_irqsave(&riscom_lock, flags);
1322         port->IER &= ~IER_TXRDY;
1323         rc_out(bp, CD180_CAR, port_No(port));
1324         rc_out(bp, CD180_IER, port->IER);
1325         spin_unlock_irqrestore(&riscom_lock, flags);
1326 }
1327
1328 static void rc_start(struct tty_struct *tty)
1329 {
1330         struct riscom_port *port = tty->driver_data;
1331         struct riscom_board *bp;
1332         unsigned long flags;
1333
1334         if (rc_paranoia_check(port, tty->name, "rc_start"))
1335                 return;
1336
1337         bp = port_Board(port);
1338
1339         spin_lock_irqsave(&riscom_lock, flags);
1340
1341         if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) {
1342                 port->IER |= IER_TXRDY;
1343                 rc_out(bp, CD180_CAR, port_No(port));
1344                 rc_out(bp, CD180_IER, port->IER);
1345         }
1346         spin_unlock_irqrestore(&riscom_lock, flags);
1347 }
1348
1349 static void rc_hangup(struct tty_struct *tty)
1350 {
1351         struct riscom_port *port = tty->driver_data;
1352         struct riscom_board *bp;
1353         unsigned long flags;
1354
1355         if (rc_paranoia_check(port, tty->name, "rc_hangup"))
1356                 return;
1357
1358         bp = port_Board(port);
1359
1360         rc_shutdown_port(tty, bp, port);
1361         spin_lock_irqsave(&port->port.lock, flags);
1362         port->port.count = 0;
1363         port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
1364         port->port.tty = NULL;
1365         wake_up_interruptible(&port->port.open_wait);
1366         spin_unlock_irqrestore(&port->port.lock, flags);
1367 }
1368
1369 static void rc_set_termios(struct tty_struct *tty,
1370                                         struct ktermios *old_termios)
1371 {
1372         struct riscom_port *port = tty->driver_data;
1373         unsigned long flags;
1374
1375         if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
1376                 return;
1377
1378         spin_lock_irqsave(&riscom_lock, flags);
1379         rc_change_speed(port_Board(port), port);
1380         spin_unlock_irqrestore(&riscom_lock, flags);
1381
1382         if ((old_termios->c_cflag & CRTSCTS) &&
1383             !(tty->termios->c_cflag & CRTSCTS)) {
1384                 tty->hw_stopped = 0;
1385                 rc_start(tty);
1386         }
1387 }
1388
1389 static const struct tty_operations riscom_ops = {
1390         .open  = rc_open,
1391         .close = rc_close,
1392         .write = rc_write,
1393         .put_char = rc_put_char,
1394         .flush_chars = rc_flush_chars,
1395         .write_room = rc_write_room,
1396         .chars_in_buffer = rc_chars_in_buffer,
1397         .flush_buffer = rc_flush_buffer,
1398         .ioctl = rc_ioctl,
1399         .throttle = rc_throttle,
1400         .unthrottle = rc_unthrottle,
1401         .set_termios = rc_set_termios,
1402         .stop = rc_stop,
1403         .start = rc_start,
1404         .hangup = rc_hangup,
1405         .tiocmget = rc_tiocmget,
1406         .tiocmset = rc_tiocmset,
1407         .break_ctl = rc_send_break,
1408 };
1409
1410 static const struct tty_port_operations riscom_port_ops = {
1411         .carrier_raised = carrier_raised,
1412 };
1413
1414
1415 static int __init rc_init_drivers(void)
1416 {
1417         int error;
1418         int i;
1419
1420         riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
1421         if (!riscom_driver)
1422                 return -ENOMEM;
1423
1424         riscom_driver->owner = THIS_MODULE;
1425         riscom_driver->name = "ttyL";
1426         riscom_driver->major = RISCOM8_NORMAL_MAJOR;
1427         riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
1428         riscom_driver->subtype = SERIAL_TYPE_NORMAL;
1429         riscom_driver->init_termios = tty_std_termios;
1430         riscom_driver->init_termios.c_cflag =
1431                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1432         riscom_driver->init_termios.c_ispeed = 9600;
1433         riscom_driver->init_termios.c_ospeed = 9600;
1434         riscom_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
1435         tty_set_operations(riscom_driver, &riscom_ops);
1436         error = tty_register_driver(riscom_driver);
1437         if (error != 0) {
1438                 put_tty_driver(riscom_driver);
1439                 printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
1440                                 "error = %d\n", error);
1441                 return 1;
1442         }
1443         memset(rc_port, 0, sizeof(rc_port));
1444         for (i = 0; i < RC_NPORT * RC_NBOARD; i++)  {
1445                 tty_port_init(&rc_port[i].port);
1446                 rc_port[i].port.ops = &riscom_port_ops;
1447                 rc_port[i].magic = RISCOM8_MAGIC;
1448         }
1449         return 0;
1450 }
1451
1452 static void rc_release_drivers(void)
1453 {
1454         tty_unregister_driver(riscom_driver);
1455         put_tty_driver(riscom_driver);
1456 }
1457
1458 #ifndef MODULE
1459 /*
1460  * Called at boot time.
1461  *
1462  * You can specify IO base for up to RC_NBOARD cards,
1463  * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
1464  * Note that there will be no probing at default
1465  * addresses in this case.
1466  *
1467  */
1468 static int __init riscom8_setup(char *str)
1469 {
1470         int ints[RC_NBOARD];
1471         int i;
1472
1473         str = get_options(str, ARRAY_SIZE(ints), ints);
1474
1475         for (i = 0; i < RC_NBOARD; i++) {
1476                 if (i < ints[0])
1477                         rc_board[i].base = ints[i+1];
1478                 else
1479                         rc_board[i].base = 0;
1480         }
1481         return 1;
1482 }
1483
1484 __setup("riscom8=", riscom8_setup);
1485 #endif
1486
1487 static char banner[] __initdata =
1488         KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
1489                   "1994-1996.\n";
1490 static char no_boards_msg[] __initdata =
1491         KERN_INFO "rc: No RISCom/8 boards detected.\n";
1492
1493 /*
1494  * This routine must be called by kernel at boot time
1495  */
1496 static int __init riscom8_init(void)
1497 {
1498         int i;
1499         int found = 0;
1500
1501         printk(banner);
1502
1503         if (rc_init_drivers())
1504                 return -EIO;
1505
1506         for (i = 0; i < RC_NBOARD; i++)
1507                 if (rc_board[i].base && !rc_probe(&rc_board[i]))
1508                         found++;
1509         if (!found)  {
1510                 rc_release_drivers();
1511                 printk(no_boards_msg);
1512                 return -EIO;
1513         }
1514         return 0;
1515 }
1516
1517 #ifdef MODULE
1518 static int iobase;
1519 static int iobase1;
1520 static int iobase2;
1521 static int iobase3;
1522 module_param(iobase, int, 0);
1523 module_param(iobase1, int, 0);
1524 module_param(iobase2, int, 0);
1525 module_param(iobase3, int, 0);
1526
1527 MODULE_LICENSE("GPL");
1528 MODULE_ALIAS_CHARDEV_MAJOR(RISCOM8_NORMAL_MAJOR);
1529 #endif /* MODULE */
1530
1531 /*
1532  * You can setup up to 4 boards (current value of RC_NBOARD)
1533  * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
1534  *
1535  */
1536 static int __init riscom8_init_module(void)
1537 {
1538 #ifdef MODULE
1539         int i;
1540
1541         if (iobase || iobase1 || iobase2 || iobase3) {
1542                 for (i = 0; i < RC_NBOARD; i++)
1543                         rc_board[i].base = 0;
1544         }
1545
1546         if (iobase)
1547                 rc_board[0].base = iobase;
1548         if (iobase1)
1549                 rc_board[1].base = iobase1;
1550         if (iobase2)
1551                 rc_board[2].base = iobase2;
1552         if (iobase3)
1553                 rc_board[3].base = iobase3;
1554 #endif /* MODULE */
1555
1556         return riscom8_init();
1557 }
1558
1559 static void __exit riscom8_exit_module(void)
1560 {
1561         int i;
1562
1563         rc_release_drivers();
1564         for (i = 0; i < RC_NBOARD; i++)
1565                 if (rc_board[i].flags & RC_BOARD_PRESENT)
1566                         rc_release_io_range(&rc_board[i]);
1567
1568 }
1569
1570 module_init(riscom8_init_module);
1571 module_exit(riscom8_exit_module);