git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-s3c2412/mach-jive.c

   1 /* linux/arch/arm/mach-s3c2410/mach-jive.c
   2  *
   3  * Copyright 2007 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * http://armlinux.simtec.co.uk/
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11 */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/types.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/list.h>
  17 #include <linux/timer.h>
  18 #include <linux/init.h>
  19 #include <linux/sysdev.h>
  20 #include <linux/serial_core.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/i2c.h>
  23
  24 #include <video/ili9320.h>
  25
  26 #include <linux/spi/spi.h>
  27
  28 #include <asm/mach/arch.h>
  29 #include <asm/mach/map.h>
  30 #include <asm/mach/irq.h>
  31
  32 #include <plat/regs-serial.h>
  33 #include <plat/nand.h>
  34 #include <plat/iic.h>
  35
  36 #include <mach/regs-power.h>
  37 #include <mach/regs-gpio.h>
  38 #include <mach/regs-mem.h>
  39 #include <mach/regs-lcd.h>
  40 #include <mach/spi-gpio.h>
  41 #include <mach/fb.h>
  42
  43 #include <asm/mach-types.h>
  44
  45 #include <linux/mtd/mtd.h>
  46 #include <linux/mtd/nand.h>
  47 #include <linux/mtd/nand_ecc.h>
  48 #include <linux/mtd/partitions.h>
  49
  50 #include <plat/clock.h>
  51 #include <plat/devs.h>
  52 #include <plat/cpu.h>
  53 #include <plat/pm.h>
  54 #include <plat/udc.h>
  55 #include <plat/iic.h>
  56
  57 static struct map_desc jive_iodesc[] __initdata = {
  58 };
  59
  60 #define UCON S3C2410_UCON_DEFAULT
  61 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
  62 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  63
  64 static struct s3c2410_uartcfg jive_uartcfgs[] = {
  65         [0] = {
  66                 .hwport      = 0,
  67                 .flags       = 0,
  68                 .ucon        = UCON,
  69                 .ulcon       = ULCON,
  70                 .ufcon       = UFCON,
  71         },
  72         [1] = {
  73                 .hwport      = 1,
  74                 .flags       = 0,
  75                 .ucon        = UCON,
  76                 .ulcon       = ULCON,
  77                 .ufcon       = UFCON,
  78         },
  79         [2] = {
  80                 .hwport      = 2,
  81                 .flags       = 0,
  82                 .ucon        = UCON,
  83                 .ulcon       = ULCON,
  84                 .ufcon       = UFCON,
  85         }
  86 };
  87
  88 /* Jive flash assignment
  89  *
  90  * 0x00000000-0x00028000 : uboot
  91  * 0x00028000-0x0002c000 : uboot env
  92  * 0x0002c000-0x00030000 : spare
  93  * 0x00030000-0x00200000 : zimage A
  94  * 0x00200000-0x01600000 : cramfs A
  95  * 0x01600000-0x017d0000 : zimage B
  96  * 0x017d0000-0x02bd0000 : cramfs B
  97  * 0x02bd0000-0x03fd0000 : yaffs
  98  */
  99 static struct mtd_partition jive_imageA_nand_part[] = {
 100
 101 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 102         /* Don't allow access to the bootloader from linux */
 103         {
 104                 .name           = "uboot",
 105                 .offset         = 0,
 106                 .size           = (160 * SZ_1K),
 107                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 108         },
 109
 110         /* spare */
 111         {
 112                 .name           = "spare",
 113                 .offset         = (176 * SZ_1K),
 114                 .size           = (16 * SZ_1K),
 115         },
 116 #endif
 117
 118         /* booted images */
 119         {
 120                 .name           = "kernel (ro)",
 121                 .offset         = (192 * SZ_1K),
 122                 .size           = (SZ_2M) - (192 * SZ_1K),
 123                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 124         }, {
 125                 .name           = "root (ro)",
 126                 .offset         = (SZ_2M),
 127                 .size           = (20 * SZ_1M),
 128                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 129         },
 130
 131         /* yaffs */
 132         {
 133                 .name           = "yaffs",
 134                 .offset         = (44 * SZ_1M),
 135                 .size           = (20 * SZ_1M),
 136         },
 137
 138         /* bootloader environment */
 139         {
 140                 .name           = "env",
 141                 .offset         = (160 * SZ_1K),
 142                 .size           = (16 * SZ_1K),
 143         },
 144
 145         /* upgrade images */
 146         {
 147                 .name           = "zimage",
 148                 .offset         = (22 * SZ_1M),
 149                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 150         }, {
 151                 .name           = "cramfs",
 152                 .offset         = (24 * SZ_1M) - (192*SZ_1K),
 153                 .size           = (20 * SZ_1M),
 154         },
 155 };
 156
 157 static struct mtd_partition jive_imageB_nand_part[] = {
 158
 159 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 160         /* Don't allow access to the bootloader from linux */
 161         {
 162                 .name           = "uboot",
 163                 .offset         = 0,
 164                 .size           = (160 * SZ_1K),
 165                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 166         },
 167
 168         /* spare */
 169         {
 170                 .name           = "spare",
 171                 .offset         = (176 * SZ_1K),
 172                 .size           = (16 * SZ_1K),
 173         },
 174 #endif
 175
 176         /* booted images */
 177         {
 178                 .name           = "kernel (ro)",
 179                 .offset         = (22 * SZ_1M),
 180                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 181                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 182         },
 183         {
 184                 .name           = "root (ro)",
 185                 .offset         = (24 * SZ_1M) - (192 * SZ_1K),
 186                 .size           = (20 * SZ_1M),
 187                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 188         },
 189
 190         /* yaffs */
 191         {
 192                 .name           = "yaffs",
 193                 .offset         = (44 * SZ_1M),
 194                 .size           = (20 * SZ_1M),
 195         },
 196
 197         /* bootloader environment */
 198         {
 199                 .name           = "env",
 200                 .offset         = (160 * SZ_1K),
 201                 .size           = (16 * SZ_1K),
 202         },
 203
 204         /* upgrade images */
 205         {
 206                 .name           = "zimage",
 207                 .offset         = (192 * SZ_1K),
 208                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 209         }, {
 210                 .name           = "cramfs",
 211                 .offset         = (2 * SZ_1M),
 212                 .size           = (20 * SZ_1M),
 213         },
 214 };
 215
 216 static struct s3c2410_nand_set jive_nand_sets[] = {
 217         [0] = {
 218                 .name           = "flash",
 219                 .nr_chips       = 1,
 220                 .nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
 221                 .partitions     = jive_imageA_nand_part,
 222         },
 223 };
 224
 225 static struct s3c2410_platform_nand jive_nand_info = {
 226         /* set taken from osiris nand timings, possibly still conservative */
 227         .tacls          = 30,
 228         .twrph0         = 55,
 229         .twrph1         = 40,
 230         .sets           = jive_nand_sets,
 231         .nr_sets        = ARRAY_SIZE(jive_nand_sets),
 232 };
 233
 234 static int __init jive_mtdset(char *options)
 235 {
 236         struct s3c2410_nand_set *nand = &jive_nand_sets[0];
 237         unsigned long set;
 238
 239         if (options == NULL || options[0] == '\0')
 240                 return 0;
 241
 242         if (strict_strtoul(options, 10, &set)) {
 243                 printk(KERN_ERR "failed to parse mtdset=%s\n", options);
 244                 return 0;
 245         }
 246
 247         switch (set) {
 248         case 1:
 249                 nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
 250                 nand->partitions = jive_imageB_nand_part;
 251         case 0:
 252                 /* this is already setup in the nand info */
 253                 break;
 254         default:
 255                 printk(KERN_ERR "Unknown mtd set %ld specified,"
 256                        "using default.", set);
 257         }
 258
 259         return 0;
 260 }
 261
 262 /* parse the mtdset= option given to the kernel command line */
 263 __setup("mtdset=", jive_mtdset);
 264
 265 /* LCD timing and setup */
 266
 267 #define LCD_XRES         (240)
 268 #define LCD_YRES         (320)
 269 #define LCD_LEFT_MARGIN  (12)
 270 #define LCD_RIGHT_MARGIN (12)
 271 #define LCD_LOWER_MARGIN (12)
 272 #define LCD_UPPER_MARGIN (12)
 273 #define LCD_VSYNC        (2)
 274 #define LCD_HSYNC        (2)
 275
 276 #define LCD_REFRESH      (60)
 277
 278 #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
 279 #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
 280
 281 struct s3c2410fb_display jive_vgg2432a4_display[] = {
 282         [0] = {
 283                 .width          = LCD_XRES,
 284                 .height         = LCD_YRES,
 285                 .xres           = LCD_XRES,
 286                 .yres           = LCD_YRES,
 287                 .left_margin    = LCD_LEFT_MARGIN,
 288                 .right_margin   = LCD_RIGHT_MARGIN,
 289                 .upper_margin   = LCD_UPPER_MARGIN,
 290                 .lower_margin   = LCD_LOWER_MARGIN,
 291                 .hsync_len      = LCD_HSYNC,
 292                 .vsync_len      = LCD_VSYNC,
 293
 294                 .pixclock       = (1000000000000LL /
 295                                    (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
 296
 297                 .bpp            = 16,
 298                 .type           = (S3C2410_LCDCON1_TFT16BPP |
 299                                    S3C2410_LCDCON1_TFT),
 300
 301                 .lcdcon5        = (S3C2410_LCDCON5_FRM565 |
 302                                    S3C2410_LCDCON5_INVVLINE |
 303                                    S3C2410_LCDCON5_INVVFRAME |
 304                                    S3C2410_LCDCON5_INVVDEN |
 305                                    S3C2410_LCDCON5_PWREN),
 306         },
 307 };
 308
 309 /* todo - put into gpio header */
 310
 311 #define S3C2410_GPCCON_MASK(x)  (3 << ((x) * 2))
 312 #define S3C2410_GPDCON_MASK(x)  (3 << ((x) * 2))
 313
 314 struct s3c2410fb_mach_info jive_lcd_config = {
 315         .displays        = jive_vgg2432a4_display,
 316         .num_displays    = ARRAY_SIZE(jive_vgg2432a4_display),
 317         .default_display = 0,
 318
 319         /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
 320          * and disable the pull down resistors on pins we are using for LCD
 321          * data. */
 322
 323         .gpcup          = (0xf << 1) | (0x3f << 10),
 324
 325         .gpccon         = (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
 326                            S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
 327                            S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
 328                            S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
 329                            S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
 330
 331         .gpccon_mask    = (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
 332                            S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
 333                            S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
 334                            S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
 335                            S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
 336
 337         .gpdup          = (0x3f << 2) | (0x3f << 10),
 338
 339         .gpdcon         = (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
 340                            S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
 341                            S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
 342                            S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
 343                            S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
 344                            S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
 345
 346         .gpdcon_mask    = (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
 347                            S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
 348                            S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
 349                            S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
 350                            S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
 351                            S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
 352 };
 353
 354 /* ILI9320 support. */
 355
 356 static void jive_lcm_reset(unsigned int set)
 357 {
 358         printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 359
 360         s3c2410_gpio_setpin(S3C2410_GPG13, set);
 361         s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
 362 }
 363
 364 #undef LCD_UPPER_MARGIN
 365 #define LCD_UPPER_MARGIN 2
 366
 367 static struct ili9320_platdata jive_lcm_config = {
 368         .hsize          = LCD_XRES,
 369         .vsize          = LCD_YRES,
 370
 371         .reset          = jive_lcm_reset,
 372         .suspend        = ILI9320_SUSPEND_DEEP,
 373
 374         .entry_mode     = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
 375         .display2       = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
 376                            ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
 377         .display3       = 0x0,
 378         .display4       = 0x0,
 379         .rgb_if1        = (ILI9320_RGBIF1_RIM_RGB18 |
 380                            ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
 381         .rgb_if2        = ILI9320_RGBIF2_DPL,
 382         .interface2     = 0x0,
 383         .interface3     = 0x3,
 384         .interface4     = (ILI9320_INTERFACE4_RTNE(16) |
 385                            ILI9320_INTERFACE4_DIVE(1)),
 386         .interface5     = 0x0,
 387         .interface6     = 0x0,
 388 };
 389
 390 /* LCD SPI support */
 391
 392 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 393 {
 394         s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
 395 }
 396
 397 static struct s3c2410_spigpio_info jive_lcd_spi = {
 398         .bus_num        = 1,
 399         .pin_clk        = S3C2410_GPG8,
 400         .pin_mosi       = S3C2410_GPB8,
 401         .num_chipselect = 1,
 402         .chip_select    = jive_lcd_spi_chipselect,
 403 };
 404
 405 static struct platform_device jive_device_lcdspi = {
 406         .name           = "spi_s3c24xx_gpio",
 407         .id             = 1,
 408         .num_resources  = 0,
 409         .dev.platform_data = &jive_lcd_spi,
 410 };
 411
 412 /* WM8750 audio code SPI definition */
 413
 414 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 415 {
 416         s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
 417 }
 418
 419 static struct s3c2410_spigpio_info jive_wm8750_spi = {
 420         .bus_num        = 2,
 421         .pin_clk        = S3C2410_GPB4,
 422         .pin_mosi       = S3C2410_GPB9,
 423         .num_chipselect = 1,
 424         .chip_select    = jive_wm8750_chipselect,
 425 };
 426
 427 static struct platform_device jive_device_wm8750 = {
 428         .name           = "spi_s3c24xx_gpio",
 429         .id             = 2,
 430         .num_resources  = 0,
 431         .dev.platform_data = &jive_wm8750_spi,
 432 };
 433
 434 /* JIVE SPI devices. */
 435
 436 static struct spi_board_info __initdata jive_spi_devs[] = {
 437         [0] = {
 438                 .modalias       = "VGG2432A4",
 439                 .bus_num        = 1,
 440                 .chip_select    = 0,
 441                 .mode           = SPI_MODE_3,   /* CPOL=1, CPHA=1 */
 442                 .max_speed_hz   = 100000,
 443                 .platform_data  = &jive_lcm_config,
 444         }, {
 445                 .modalias       = "WM8750",
 446                 .bus_num        = 2,
 447                 .chip_select    = 0,
 448                 .mode           = SPI_MODE_0,   /* CPOL=0, CPHA=0 */
 449                 .max_speed_hz   = 100000,
 450         },
 451 };
 452
 453 /* I2C bus and device configuration. */
 454
 455 static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
 456         .max_freq       = 80 * 1000,
 457         .bus_freq       = 50 * 1000,
 458         .flags          = S3C_IICFLG_FILTER,
 459         .sda_delay      = 2,
 460 };
 461
 462 static struct i2c_board_info jive_i2c_devs[] __initdata = {
 463         [0] = {
 464                 I2C_BOARD_INFO("lis302dl", 0x1c),
 465                 .irq    = IRQ_EINT14,
 466         },
 467 };
 468
 469 /* The platform devices being used. */
 470
 471 static struct platform_device *jive_devices[] __initdata = {
 472         &s3c_device_usb,
 473         &s3c_device_rtc,
 474         &s3c_device_wdt,
 475         &s3c_device_i2c0,
 476         &s3c_device_lcd,
 477         &jive_device_lcdspi,
 478         &jive_device_wm8750,
 479         &s3c_device_nand,
 480         &s3c_device_usbgadget,
 481 };
 482
 483 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
 484         .vbus_pin       = S3C2410_GPG1,         /* detect is on GPG1 */
 485 };
 486
 487 /* Jive power management device */
 488
 489 #ifdef CONFIG_PM
 490 static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
 491 {
 492         /* Write the magic value u-boot uses to check for resume into
 493          * the INFORM0 register, and ensure INFORM1 is set to the
 494          * correct address to resume from. */
 495
 496         __raw_writel(0x2BED, S3C2412_INFORM0);
 497         __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
 498
 499         return 0;
 500 }
 501
 502 static int jive_pm_resume(struct sys_device *sd)
 503 {
 504         __raw_writel(0x0, S3C2412_INFORM0);
 505         return 0;
 506 }
 507
 508 #else
 509 #define jive_pm_suspend NULL
 510 #define jive_pm_resume NULL
 511 #endif
 512
 513 static struct sysdev_class jive_pm_sysclass = {
 514         .name           = "jive-pm",
 515         .suspend        = jive_pm_suspend,
 516         .resume         = jive_pm_resume,
 517 };
 518
 519 static struct sys_device jive_pm_sysdev = {
 520         .cls            = &jive_pm_sysclass,
 521 };
 522
 523 static void __init jive_map_io(void)
 524 {
 525         s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
 526         s3c24xx_init_clocks(12000000);
 527         s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 528 }
 529
 530 static void jive_power_off(void)
 531 {
 532         printk(KERN_INFO "powering system down...\n");
 533
 534         s3c2410_gpio_setpin(S3C2410_GPC5, 1);
 535         s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
 536 }
 537
 538 static void __init jive_machine_init(void)
 539 {
 540         /* register system devices for managing low level suspend */
 541
 542         sysdev_class_register(&jive_pm_sysclass);
 543         sysdev_register(&jive_pm_sysdev);
 544
 545         /* write our sleep configurations for the IO. Pull down all unused
 546          * IO, ensure that we have turned off all peripherals we do not
 547          * need, and configure the ones we do need. */
 548
 549         /* Port B sleep */
 550
 551         __raw_writel(S3C2412_SLPCON_IN(0)   |
 552                      S3C2412_SLPCON_PULL(1) |
 553                      S3C2412_SLPCON_HIGH(2) |
 554                      S3C2412_SLPCON_PULL(3) |
 555                      S3C2412_SLPCON_PULL(4) |
 556                      S3C2412_SLPCON_PULL(5) |
 557                      S3C2412_SLPCON_PULL(6) |
 558                      S3C2412_SLPCON_HIGH(7) |
 559                      S3C2412_SLPCON_PULL(8) |
 560                      S3C2412_SLPCON_PULL(9) |
 561                      S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
 562
 563         /* Port C sleep */
 564
 565         __raw_writel(S3C2412_SLPCON_PULL(0) |
 566                      S3C2412_SLPCON_PULL(1) |
 567                      S3C2412_SLPCON_PULL(2) |
 568                      S3C2412_SLPCON_PULL(3) |
 569                      S3C2412_SLPCON_PULL(4) |
 570                      S3C2412_SLPCON_PULL(5) |
 571                      S3C2412_SLPCON_LOW(6)  |
 572                      S3C2412_SLPCON_PULL(6) |
 573                      S3C2412_SLPCON_PULL(7) |
 574                      S3C2412_SLPCON_PULL(8) |
 575                      S3C2412_SLPCON_PULL(9) |
 576                      S3C2412_SLPCON_PULL(10) |
 577                      S3C2412_SLPCON_PULL(11) |
 578                      S3C2412_SLPCON_PULL(12) |
 579                      S3C2412_SLPCON_PULL(13) |
 580                      S3C2412_SLPCON_PULL(14) |
 581                      S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
 582
 583         /* Port D sleep */
 584
 585         __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
 586
 587         /* Port F sleep */
 588
 589         __raw_writel(S3C2412_SLPCON_LOW(0)  |
 590                      S3C2412_SLPCON_LOW(1)  |
 591                      S3C2412_SLPCON_LOW(2)  |
 592                      S3C2412_SLPCON_EINT(3) |
 593                      S3C2412_SLPCON_EINT(4) |
 594                      S3C2412_SLPCON_EINT(5) |
 595                      S3C2412_SLPCON_EINT(6) |
 596                      S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
 597
 598         /* Port G sleep */
 599
 600         __raw_writel(S3C2412_SLPCON_IN(0)    |
 601                      S3C2412_SLPCON_IN(1)    |
 602                      S3C2412_SLPCON_IN(2)    |
 603                      S3C2412_SLPCON_IN(3)    |
 604                      S3C2412_SLPCON_IN(4)    |
 605                      S3C2412_SLPCON_IN(5)    |
 606                      S3C2412_SLPCON_IN(6)    |
 607                      S3C2412_SLPCON_IN(7)    |
 608                      S3C2412_SLPCON_PULL(8)  |
 609                      S3C2412_SLPCON_PULL(9)  |
 610                      S3C2412_SLPCON_IN(10)   |
 611                      S3C2412_SLPCON_PULL(11) |
 612                      S3C2412_SLPCON_PULL(12) |
 613                      S3C2412_SLPCON_PULL(13) |
 614                      S3C2412_SLPCON_IN(14)   |
 615                      S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
 616
 617         /* Port H sleep */
 618
 619         __raw_writel(S3C2412_SLPCON_PULL(0) |
 620                      S3C2412_SLPCON_PULL(1) |
 621                      S3C2412_SLPCON_PULL(2) |
 622                      S3C2412_SLPCON_PULL(3) |
 623                      S3C2412_SLPCON_PULL(4) |
 624                      S3C2412_SLPCON_PULL(5) |
 625                      S3C2412_SLPCON_PULL(6) |
 626                      S3C2412_SLPCON_IN(7)   |
 627                      S3C2412_SLPCON_IN(8)   |
 628                      S3C2412_SLPCON_PULL(9) |
 629                      S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
 630
 631         /* initialise the power management now we've setup everything. */
 632
 633         s3c_pm_init();
 634
 635         s3c_device_nand.dev.platform_data = &jive_nand_info;
 636
 637         /* initialise the spi */
 638
 639         s3c2410_gpio_setpin(S3C2410_GPG13, 0);
 640         s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
 641
 642         s3c2410_gpio_setpin(S3C2410_GPB7, 1);
 643         s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
 644
 645         s3c2410_gpio_setpin(S3C2410_GPB6, 0);
 646         s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
 647
 648         s3c2410_gpio_setpin(S3C2410_GPG8, 1);
 649         s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
 650
 651         /* initialise the WM8750 spi */
 652
 653         s3c2410_gpio_setpin(S3C2410_GPH10, 1);
 654         s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
 655
 656         /* Turn off suspend on both USB ports, and switch the
 657          * selectable USB port to USB device mode. */
 658
 659         s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 660                               S3C2410_MISCCR_USBSUSPND0 |
 661                               S3C2410_MISCCR_USBSUSPND1, 0x0);
 662
 663         s3c24xx_udc_set_platdata(&jive_udc_cfg);
 664         s3c24xx_fb_set_platdata(&jive_lcd_config);
 665
 666         spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
 667
 668         s3c_i2c0_set_platdata(&jive_i2c_cfg);
 669         i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 670
 671         pm_power_off = jive_power_off;
 672
 673         platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
 674 }
 675
 676 MACHINE_START(JIVE, "JIVE")
 677         /* Maintainer: Ben Dooks <ben@fluff.org> */
 678         .phys_io        = S3C2410_PA_UART,
 679         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 680         .boot_params    = S3C2410_SDRAM_PA + 0x100,
 681
 682         .init_irq       = s3c24xx_init_irq,
 683         .map_io         = jive_map_io,
 684         .init_machine   = jive_machine_init,
 685         .timer          = &s3c24xx_timer,
 686 MACHINE_END