Merge branch 'x86/fixmap' into x86/devel
[linux-2.6] / drivers / net / s2io.c
1 /************************************************************************
2  * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
3  * Copyright(c) 2002-2007 Neterion Inc.
4
5  * This software may be used and distributed according to the terms of
6  * the GNU General Public License (GPL), incorporated herein by reference.
7  * Drivers based on or derived from this code fall under the GPL and must
8  * retain the authorship, copyright and license notice.  This file is not
9  * a complete program and may only be used when the entire operating
10  * system is licensed under the GPL.
11  * See the file COPYING in this distribution for more information.
12  *
13  * Credits:
14  * Jeff Garzik          : For pointing out the improper error condition
15  *                        check in the s2io_xmit routine and also some
16  *                        issues in the Tx watch dog function. Also for
17  *                        patiently answering all those innumerable
18  *                        questions regaring the 2.6 porting issues.
19  * Stephen Hemminger    : Providing proper 2.6 porting mechanism for some
20  *                        macros available only in 2.6 Kernel.
21  * Francois Romieu      : For pointing out all code part that were
22  *                        deprecated and also styling related comments.
23  * Grant Grundler       : For helping me get rid of some Architecture
24  *                        dependent code.
25  * Christopher Hellwig  : Some more 2.6 specific issues in the driver.
26  *
27  * The module loadable parameters that are supported by the driver and a brief
28  * explaination of all the variables.
29  *
30  * rx_ring_num : This can be used to program the number of receive rings used
31  * in the driver.
32  * rx_ring_sz: This defines the number of receive blocks each ring can have.
33  *     This is also an array of size 8.
34  * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
35  *              values are 1, 2.
36  * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
37  * tx_fifo_len: This too is an array of 8. Each element defines the number of
38  * Tx descriptors that can be associated with each corresponding FIFO.
39  * intr_type: This defines the type of interrupt. The values can be 0(INTA),
40  *     2(MSI_X). Default value is '2(MSI_X)'
41  * lro_enable: Specifies whether to enable Large Receive Offload (LRO) or not.
42  *     Possible values '1' for enable '0' for disable. Default is '0'
43  * lro_max_pkts: This parameter defines maximum number of packets can be
44  *     aggregated as a single large packet
45  * napi: This parameter used to enable/disable NAPI (polling Rx)
46  *     Possible values '1' for enable and '0' for disable. Default is '1'
47  * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
48  *      Possible values '1' for enable and '0' for disable. Default is '0'
49  * vlan_tag_strip: This can be used to enable or disable vlan stripping.
50  *                 Possible values '1' for enable , '0' for disable.
51  *                 Default is '2' - which means disable in promisc mode
52  *                 and enable in non-promiscuous mode.
53  * multiq: This parameter used to enable/disable MULTIQUEUE support.
54  *      Possible values '1' for enable and '0' for disable. Default is '0'
55  ************************************************************************/
56
57 #include <linux/module.h>
58 #include <linux/types.h>
59 #include <linux/errno.h>
60 #include <linux/ioport.h>
61 #include <linux/pci.h>
62 #include <linux/dma-mapping.h>
63 #include <linux/kernel.h>
64 #include <linux/netdevice.h>
65 #include <linux/etherdevice.h>
66 #include <linux/skbuff.h>
67 #include <linux/init.h>
68 #include <linux/delay.h>
69 #include <linux/stddef.h>
70 #include <linux/ioctl.h>
71 #include <linux/timex.h>
72 #include <linux/ethtool.h>
73 #include <linux/workqueue.h>
74 #include <linux/if_vlan.h>
75 #include <linux/ip.h>
76 #include <linux/tcp.h>
77 #include <net/tcp.h>
78
79 #include <asm/system.h>
80 #include <asm/uaccess.h>
81 #include <asm/io.h>
82 #include <asm/div64.h>
83 #include <asm/irq.h>
84
85 /* local include */
86 #include "s2io.h"
87 #include "s2io-regs.h"
88
89 #define DRV_VERSION "2.0.26.24"
90
91 /* S2io Driver name & version. */
92 static char s2io_driver_name[] = "Neterion";
93 static char s2io_driver_version[] = DRV_VERSION;
94
95 static int rxd_size[2] = {32,48};
96 static int rxd_count[2] = {127,85};
97
98 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
99 {
100         int ret;
101
102         ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
103                 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
104
105         return ret;
106 }
107
108 /*
109  * Cards with following subsystem_id have a link state indication
110  * problem, 600B, 600C, 600D, 640B, 640C and 640D.
111  * macro below identifies these cards given the subsystem_id.
112  */
113 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
114         (dev_type == XFRAME_I_DEVICE) ?                 \
115                 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
116                  ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
117
118 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
119                                       ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
120
121 static inline int is_s2io_card_up(const struct s2io_nic * sp)
122 {
123         return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
124 }
125
126 /* Ethtool related variables and Macros. */
127 static char s2io_gstrings[][ETH_GSTRING_LEN] = {
128         "Register test\t(offline)",
129         "Eeprom test\t(offline)",
130         "Link test\t(online)",
131         "RLDRAM test\t(offline)",
132         "BIST Test\t(offline)"
133 };
134
135 static char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
136         {"tmac_frms"},
137         {"tmac_data_octets"},
138         {"tmac_drop_frms"},
139         {"tmac_mcst_frms"},
140         {"tmac_bcst_frms"},
141         {"tmac_pause_ctrl_frms"},
142         {"tmac_ttl_octets"},
143         {"tmac_ucst_frms"},
144         {"tmac_nucst_frms"},
145         {"tmac_any_err_frms"},
146         {"tmac_ttl_less_fb_octets"},
147         {"tmac_vld_ip_octets"},
148         {"tmac_vld_ip"},
149         {"tmac_drop_ip"},
150         {"tmac_icmp"},
151         {"tmac_rst_tcp"},
152         {"tmac_tcp"},
153         {"tmac_udp"},
154         {"rmac_vld_frms"},
155         {"rmac_data_octets"},
156         {"rmac_fcs_err_frms"},
157         {"rmac_drop_frms"},
158         {"rmac_vld_mcst_frms"},
159         {"rmac_vld_bcst_frms"},
160         {"rmac_in_rng_len_err_frms"},
161         {"rmac_out_rng_len_err_frms"},
162         {"rmac_long_frms"},
163         {"rmac_pause_ctrl_frms"},
164         {"rmac_unsup_ctrl_frms"},
165         {"rmac_ttl_octets"},
166         {"rmac_accepted_ucst_frms"},
167         {"rmac_accepted_nucst_frms"},
168         {"rmac_discarded_frms"},
169         {"rmac_drop_events"},
170         {"rmac_ttl_less_fb_octets"},
171         {"rmac_ttl_frms"},
172         {"rmac_usized_frms"},
173         {"rmac_osized_frms"},
174         {"rmac_frag_frms"},
175         {"rmac_jabber_frms"},
176         {"rmac_ttl_64_frms"},
177         {"rmac_ttl_65_127_frms"},
178         {"rmac_ttl_128_255_frms"},
179         {"rmac_ttl_256_511_frms"},
180         {"rmac_ttl_512_1023_frms"},
181         {"rmac_ttl_1024_1518_frms"},
182         {"rmac_ip"},
183         {"rmac_ip_octets"},
184         {"rmac_hdr_err_ip"},
185         {"rmac_drop_ip"},
186         {"rmac_icmp"},
187         {"rmac_tcp"},
188         {"rmac_udp"},
189         {"rmac_err_drp_udp"},
190         {"rmac_xgmii_err_sym"},
191         {"rmac_frms_q0"},
192         {"rmac_frms_q1"},
193         {"rmac_frms_q2"},
194         {"rmac_frms_q3"},
195         {"rmac_frms_q4"},
196         {"rmac_frms_q5"},
197         {"rmac_frms_q6"},
198         {"rmac_frms_q7"},
199         {"rmac_full_q0"},
200         {"rmac_full_q1"},
201         {"rmac_full_q2"},
202         {"rmac_full_q3"},
203         {"rmac_full_q4"},
204         {"rmac_full_q5"},
205         {"rmac_full_q6"},
206         {"rmac_full_q7"},
207         {"rmac_pause_cnt"},
208         {"rmac_xgmii_data_err_cnt"},
209         {"rmac_xgmii_ctrl_err_cnt"},
210         {"rmac_accepted_ip"},
211         {"rmac_err_tcp"},
212         {"rd_req_cnt"},
213         {"new_rd_req_cnt"},
214         {"new_rd_req_rtry_cnt"},
215         {"rd_rtry_cnt"},
216         {"wr_rtry_rd_ack_cnt"},
217         {"wr_req_cnt"},
218         {"new_wr_req_cnt"},
219         {"new_wr_req_rtry_cnt"},
220         {"wr_rtry_cnt"},
221         {"wr_disc_cnt"},
222         {"rd_rtry_wr_ack_cnt"},
223         {"txp_wr_cnt"},
224         {"txd_rd_cnt"},
225         {"txd_wr_cnt"},
226         {"rxd_rd_cnt"},
227         {"rxd_wr_cnt"},
228         {"txf_rd_cnt"},
229         {"rxf_wr_cnt"}
230 };
231
232 static char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
233         {"rmac_ttl_1519_4095_frms"},
234         {"rmac_ttl_4096_8191_frms"},
235         {"rmac_ttl_8192_max_frms"},
236         {"rmac_ttl_gt_max_frms"},
237         {"rmac_osized_alt_frms"},
238         {"rmac_jabber_alt_frms"},
239         {"rmac_gt_max_alt_frms"},
240         {"rmac_vlan_frms"},
241         {"rmac_len_discard"},
242         {"rmac_fcs_discard"},
243         {"rmac_pf_discard"},
244         {"rmac_da_discard"},
245         {"rmac_red_discard"},
246         {"rmac_rts_discard"},
247         {"rmac_ingm_full_discard"},
248         {"link_fault_cnt"}
249 };
250
251 static char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
252         {"\n DRIVER STATISTICS"},
253         {"single_bit_ecc_errs"},
254         {"double_bit_ecc_errs"},
255         {"parity_err_cnt"},
256         {"serious_err_cnt"},
257         {"soft_reset_cnt"},
258         {"fifo_full_cnt"},
259         {"ring_0_full_cnt"},
260         {"ring_1_full_cnt"},
261         {"ring_2_full_cnt"},
262         {"ring_3_full_cnt"},
263         {"ring_4_full_cnt"},
264         {"ring_5_full_cnt"},
265         {"ring_6_full_cnt"},
266         {"ring_7_full_cnt"},
267         {"alarm_transceiver_temp_high"},
268         {"alarm_transceiver_temp_low"},
269         {"alarm_laser_bias_current_high"},
270         {"alarm_laser_bias_current_low"},
271         {"alarm_laser_output_power_high"},
272         {"alarm_laser_output_power_low"},
273         {"warn_transceiver_temp_high"},
274         {"warn_transceiver_temp_low"},
275         {"warn_laser_bias_current_high"},
276         {"warn_laser_bias_current_low"},
277         {"warn_laser_output_power_high"},
278         {"warn_laser_output_power_low"},
279         {"lro_aggregated_pkts"},
280         {"lro_flush_both_count"},
281         {"lro_out_of_sequence_pkts"},
282         {"lro_flush_due_to_max_pkts"},
283         {"lro_avg_aggr_pkts"},
284         {"mem_alloc_fail_cnt"},
285         {"pci_map_fail_cnt"},
286         {"watchdog_timer_cnt"},
287         {"mem_allocated"},
288         {"mem_freed"},
289         {"link_up_cnt"},
290         {"link_down_cnt"},
291         {"link_up_time"},
292         {"link_down_time"},
293         {"tx_tcode_buf_abort_cnt"},
294         {"tx_tcode_desc_abort_cnt"},
295         {"tx_tcode_parity_err_cnt"},
296         {"tx_tcode_link_loss_cnt"},
297         {"tx_tcode_list_proc_err_cnt"},
298         {"rx_tcode_parity_err_cnt"},
299         {"rx_tcode_abort_cnt"},
300         {"rx_tcode_parity_abort_cnt"},
301         {"rx_tcode_rda_fail_cnt"},
302         {"rx_tcode_unkn_prot_cnt"},
303         {"rx_tcode_fcs_err_cnt"},
304         {"rx_tcode_buf_size_err_cnt"},
305         {"rx_tcode_rxd_corrupt_cnt"},
306         {"rx_tcode_unkn_err_cnt"},
307         {"tda_err_cnt"},
308         {"pfc_err_cnt"},
309         {"pcc_err_cnt"},
310         {"tti_err_cnt"},
311         {"tpa_err_cnt"},
312         {"sm_err_cnt"},
313         {"lso_err_cnt"},
314         {"mac_tmac_err_cnt"},
315         {"mac_rmac_err_cnt"},
316         {"xgxs_txgxs_err_cnt"},
317         {"xgxs_rxgxs_err_cnt"},
318         {"rc_err_cnt"},
319         {"prc_pcix_err_cnt"},
320         {"rpa_err_cnt"},
321         {"rda_err_cnt"},
322         {"rti_err_cnt"},
323         {"mc_err_cnt"}
324 };
325
326 #define S2IO_XENA_STAT_LEN      ARRAY_SIZE(ethtool_xena_stats_keys)
327 #define S2IO_ENHANCED_STAT_LEN  ARRAY_SIZE(ethtool_enhanced_stats_keys)
328 #define S2IO_DRIVER_STAT_LEN    ARRAY_SIZE(ethtool_driver_stats_keys)
329
330 #define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN )
331 #define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN )
332
333 #define XFRAME_I_STAT_STRINGS_LEN ( XFRAME_I_STAT_LEN * ETH_GSTRING_LEN )
334 #define XFRAME_II_STAT_STRINGS_LEN ( XFRAME_II_STAT_LEN * ETH_GSTRING_LEN )
335
336 #define S2IO_TEST_LEN   ARRAY_SIZE(s2io_gstrings)
337 #define S2IO_STRINGS_LEN        S2IO_TEST_LEN * ETH_GSTRING_LEN
338
339 #define S2IO_TIMER_CONF(timer, handle, arg, exp)                \
340                         init_timer(&timer);                     \
341                         timer.function = handle;                \
342                         timer.data = (unsigned long) arg;       \
343                         mod_timer(&timer, (jiffies + exp))      \
344
345 /* copy mac addr to def_mac_addr array */
346 static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
347 {
348         sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
349         sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
350         sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
351         sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
352         sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
353         sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
354 }
355 /* Add the vlan */
356 static void s2io_vlan_rx_register(struct net_device *dev,
357                                         struct vlan_group *grp)
358 {
359         int i;
360         struct s2io_nic *nic = dev->priv;
361         unsigned long flags[MAX_TX_FIFOS];
362         struct mac_info *mac_control = &nic->mac_control;
363         struct config_param *config = &nic->config;
364
365         for (i = 0; i < config->tx_fifo_num; i++)
366                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
367
368         nic->vlgrp = grp;
369         for (i = config->tx_fifo_num - 1; i >= 0; i--)
370                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
371                                 flags[i]);
372 }
373
374 /* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */
375 static int vlan_strip_flag;
376
377 /* Unregister the vlan */
378 static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
379 {
380         int i;
381         struct s2io_nic *nic = dev->priv;
382         unsigned long flags[MAX_TX_FIFOS];
383         struct mac_info *mac_control = &nic->mac_control;
384         struct config_param *config = &nic->config;
385
386         for (i = 0; i < config->tx_fifo_num; i++)
387                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
388
389         if (nic->vlgrp)
390                 vlan_group_set_device(nic->vlgrp, vid, NULL);
391
392         for (i = config->tx_fifo_num - 1; i >= 0; i--)
393                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
394                         flags[i]);
395 }
396
397 /*
398  * Constants to be programmed into the Xena's registers, to configure
399  * the XAUI.
400  */
401
402 #define END_SIGN        0x0
403 static const u64 herc_act_dtx_cfg[] = {
404         /* Set address */
405         0x8000051536750000ULL, 0x80000515367500E0ULL,
406         /* Write data */
407         0x8000051536750004ULL, 0x80000515367500E4ULL,
408         /* Set address */
409         0x80010515003F0000ULL, 0x80010515003F00E0ULL,
410         /* Write data */
411         0x80010515003F0004ULL, 0x80010515003F00E4ULL,
412         /* Set address */
413         0x801205150D440000ULL, 0x801205150D4400E0ULL,
414         /* Write data */
415         0x801205150D440004ULL, 0x801205150D4400E4ULL,
416         /* Set address */
417         0x80020515F2100000ULL, 0x80020515F21000E0ULL,
418         /* Write data */
419         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
420         /* Done */
421         END_SIGN
422 };
423
424 static const u64 xena_dtx_cfg[] = {
425         /* Set address */
426         0x8000051500000000ULL, 0x80000515000000E0ULL,
427         /* Write data */
428         0x80000515D9350004ULL, 0x80000515D93500E4ULL,
429         /* Set address */
430         0x8001051500000000ULL, 0x80010515000000E0ULL,
431         /* Write data */
432         0x80010515001E0004ULL, 0x80010515001E00E4ULL,
433         /* Set address */
434         0x8002051500000000ULL, 0x80020515000000E0ULL,
435         /* Write data */
436         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
437         END_SIGN
438 };
439
440 /*
441  * Constants for Fixing the MacAddress problem seen mostly on
442  * Alpha machines.
443  */
444 static const u64 fix_mac[] = {
445         0x0060000000000000ULL, 0x0060600000000000ULL,
446         0x0040600000000000ULL, 0x0000600000000000ULL,
447         0x0020600000000000ULL, 0x0060600000000000ULL,
448         0x0020600000000000ULL, 0x0060600000000000ULL,
449         0x0020600000000000ULL, 0x0060600000000000ULL,
450         0x0020600000000000ULL, 0x0060600000000000ULL,
451         0x0020600000000000ULL, 0x0060600000000000ULL,
452         0x0020600000000000ULL, 0x0060600000000000ULL,
453         0x0020600000000000ULL, 0x0060600000000000ULL,
454         0x0020600000000000ULL, 0x0060600000000000ULL,
455         0x0020600000000000ULL, 0x0060600000000000ULL,
456         0x0020600000000000ULL, 0x0060600000000000ULL,
457         0x0020600000000000ULL, 0x0000600000000000ULL,
458         0x0040600000000000ULL, 0x0060600000000000ULL,
459         END_SIGN
460 };
461
462 MODULE_LICENSE("GPL");
463 MODULE_VERSION(DRV_VERSION);
464
465
466 /* Module Loadable parameters. */
467 S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
468 S2IO_PARM_INT(rx_ring_num, 1);
469 S2IO_PARM_INT(multiq, 0);
470 S2IO_PARM_INT(rx_ring_mode, 1);
471 S2IO_PARM_INT(use_continuous_tx_intrs, 1);
472 S2IO_PARM_INT(rmac_pause_time, 0x100);
473 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
474 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
475 S2IO_PARM_INT(shared_splits, 0);
476 S2IO_PARM_INT(tmac_util_period, 5);
477 S2IO_PARM_INT(rmac_util_period, 5);
478 S2IO_PARM_INT(l3l4hdr_size, 128);
479 /* 0 is no steering, 1 is Priority steering, 2 is Default steering */
480 S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
481 /* Frequency of Rx desc syncs expressed as power of 2 */
482 S2IO_PARM_INT(rxsync_frequency, 3);
483 /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
484 S2IO_PARM_INT(intr_type, 2);
485 /* Large receive offload feature */
486 static unsigned int lro_enable;
487 module_param_named(lro, lro_enable, uint, 0);
488
489 /* Max pkts to be aggregated by LRO at one time. If not specified,
490  * aggregation happens until we hit max IP pkt size(64K)
491  */
492 S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
493 S2IO_PARM_INT(indicate_max_pkts, 0);
494
495 S2IO_PARM_INT(napi, 1);
496 S2IO_PARM_INT(ufo, 0);
497 S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
498
499 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
500     {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
501 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
502     {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
503 static unsigned int rts_frm_len[MAX_RX_RINGS] =
504     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
505
506 module_param_array(tx_fifo_len, uint, NULL, 0);
507 module_param_array(rx_ring_sz, uint, NULL, 0);
508 module_param_array(rts_frm_len, uint, NULL, 0);
509
510 /*
511  * S2IO device table.
512  * This table lists all the devices that this driver supports.
513  */
514 static struct pci_device_id s2io_tbl[] __devinitdata = {
515         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
516          PCI_ANY_ID, PCI_ANY_ID},
517         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
518          PCI_ANY_ID, PCI_ANY_ID},
519         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
520          PCI_ANY_ID, PCI_ANY_ID},
521         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
522          PCI_ANY_ID, PCI_ANY_ID},
523         {0,}
524 };
525
526 MODULE_DEVICE_TABLE(pci, s2io_tbl);
527
528 static struct pci_error_handlers s2io_err_handler = {
529         .error_detected = s2io_io_error_detected,
530         .slot_reset = s2io_io_slot_reset,
531         .resume = s2io_io_resume,
532 };
533
534 static struct pci_driver s2io_driver = {
535       .name = "S2IO",
536       .id_table = s2io_tbl,
537       .probe = s2io_init_nic,
538       .remove = __devexit_p(s2io_rem_nic),
539       .err_handler = &s2io_err_handler,
540 };
541
542 /* A simplifier macro used both by init and free shared_mem Fns(). */
543 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
544
545 /* netqueue manipulation helper functions */
546 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
547 {
548         int i;
549 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
550         if (sp->config.multiq) {
551                 for (i = 0; i < sp->config.tx_fifo_num; i++)
552                         netif_stop_subqueue(sp->dev, i);
553         } else
554 #endif
555         {
556                 for (i = 0; i < sp->config.tx_fifo_num; i++)
557                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
558                 netif_stop_queue(sp->dev);
559         }
560 }
561
562 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
563 {
564 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
565         if (sp->config.multiq)
566                 netif_stop_subqueue(sp->dev, fifo_no);
567         else
568 #endif
569         {
570                 sp->mac_control.fifos[fifo_no].queue_state =
571                         FIFO_QUEUE_STOP;
572                 netif_stop_queue(sp->dev);
573         }
574 }
575
576 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
577 {
578         int i;
579 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
580         if (sp->config.multiq) {
581                 for (i = 0; i < sp->config.tx_fifo_num; i++)
582                         netif_start_subqueue(sp->dev, i);
583         } else
584 #endif
585         {
586                 for (i = 0; i < sp->config.tx_fifo_num; i++)
587                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
588                 netif_start_queue(sp->dev);
589         }
590 }
591
592 static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
593 {
594 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
595         if (sp->config.multiq)
596                 netif_start_subqueue(sp->dev, fifo_no);
597         else
598 #endif
599         {
600                 sp->mac_control.fifos[fifo_no].queue_state =
601                         FIFO_QUEUE_START;
602                 netif_start_queue(sp->dev);
603         }
604 }
605
606 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
607 {
608         int i;
609 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
610         if (sp->config.multiq) {
611                 for (i = 0; i < sp->config.tx_fifo_num; i++)
612                         netif_wake_subqueue(sp->dev, i);
613         } else
614 #endif
615         {
616                 for (i = 0; i < sp->config.tx_fifo_num; i++)
617                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
618                 netif_wake_queue(sp->dev);
619         }
620 }
621
622 static inline void s2io_wake_tx_queue(
623         struct fifo_info *fifo, int cnt, u8 multiq)
624 {
625
626 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
627         if (multiq) {
628                 if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
629                         netif_wake_subqueue(fifo->dev, fifo->fifo_no);
630         } else
631 #endif
632         if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
633                 if (netif_queue_stopped(fifo->dev)) {
634                         fifo->queue_state = FIFO_QUEUE_START;
635                         netif_wake_queue(fifo->dev);
636                 }
637         }
638 }
639
640 /**
641  * init_shared_mem - Allocation and Initialization of Memory
642  * @nic: Device private variable.
643  * Description: The function allocates all the memory areas shared
644  * between the NIC and the driver. This includes Tx descriptors,
645  * Rx descriptors and the statistics block.
646  */
647
648 static int init_shared_mem(struct s2io_nic *nic)
649 {
650         u32 size;
651         void *tmp_v_addr, *tmp_v_addr_next;
652         dma_addr_t tmp_p_addr, tmp_p_addr_next;
653         struct RxD_block *pre_rxd_blk = NULL;
654         int i, j, blk_cnt;
655         int lst_size, lst_per_page;
656         struct net_device *dev = nic->dev;
657         unsigned long tmp;
658         struct buffAdd *ba;
659
660         struct mac_info *mac_control;
661         struct config_param *config;
662         unsigned long long mem_allocated = 0;
663
664         mac_control = &nic->mac_control;
665         config = &nic->config;
666
667
668         /* Allocation and initialization of TXDLs in FIOFs */
669         size = 0;
670         for (i = 0; i < config->tx_fifo_num; i++) {
671                 size += config->tx_cfg[i].fifo_len;
672         }
673         if (size > MAX_AVAILABLE_TXDS) {
674                 DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, ");
675                 DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
676                 return -EINVAL;
677         }
678
679         size = 0;
680         for (i = 0; i < config->tx_fifo_num; i++) {
681                 size = config->tx_cfg[i].fifo_len;
682                 /*
683                  * Legal values are from 2 to 8192
684                  */
685                 if (size < 2) {
686                         DBG_PRINT(ERR_DBG, "s2io: Invalid fifo len (%d)", size);
687                         DBG_PRINT(ERR_DBG, "for fifo %d\n", i);
688                         DBG_PRINT(ERR_DBG, "s2io: Legal values for fifo len"
689                                 "are 2 to 8192\n");
690                         return -EINVAL;
691                 }
692         }
693
694         lst_size = (sizeof(struct TxD) * config->max_txds);
695         lst_per_page = PAGE_SIZE / lst_size;
696
697         for (i = 0; i < config->tx_fifo_num; i++) {
698                 int fifo_len = config->tx_cfg[i].fifo_len;
699                 int list_holder_size = fifo_len * sizeof(struct list_info_hold);
700                 mac_control->fifos[i].list_info = kzalloc(list_holder_size,
701                                                           GFP_KERNEL);
702                 if (!mac_control->fifos[i].list_info) {
703                         DBG_PRINT(INFO_DBG,
704                                   "Malloc failed for list_info\n");
705                         return -ENOMEM;
706                 }
707                 mem_allocated += list_holder_size;
708         }
709         for (i = 0; i < config->tx_fifo_num; i++) {
710                 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
711                                                 lst_per_page);
712                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
713                 mac_control->fifos[i].tx_curr_put_info.fifo_len =
714                     config->tx_cfg[i].fifo_len - 1;
715                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
716                 mac_control->fifos[i].tx_curr_get_info.fifo_len =
717                     config->tx_cfg[i].fifo_len - 1;
718                 mac_control->fifos[i].fifo_no = i;
719                 mac_control->fifos[i].nic = nic;
720                 mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
721                 mac_control->fifos[i].dev = dev;
722
723                 for (j = 0; j < page_num; j++) {
724                         int k = 0;
725                         dma_addr_t tmp_p;
726                         void *tmp_v;
727                         tmp_v = pci_alloc_consistent(nic->pdev,
728                                                      PAGE_SIZE, &tmp_p);
729                         if (!tmp_v) {
730                                 DBG_PRINT(INFO_DBG,
731                                           "pci_alloc_consistent ");
732                                 DBG_PRINT(INFO_DBG, "failed for TxDL\n");
733                                 return -ENOMEM;
734                         }
735                         /* If we got a zero DMA address(can happen on
736                          * certain platforms like PPC), reallocate.
737                          * Store virtual address of page we don't want,
738                          * to be freed later.
739                          */
740                         if (!tmp_p) {
741                                 mac_control->zerodma_virt_addr = tmp_v;
742                                 DBG_PRINT(INIT_DBG,
743                                 "%s: Zero DMA address for TxDL. ", dev->name);
744                                 DBG_PRINT(INIT_DBG,
745                                 "Virtual address %p\n", tmp_v);
746                                 tmp_v = pci_alloc_consistent(nic->pdev,
747                                                      PAGE_SIZE, &tmp_p);
748                                 if (!tmp_v) {
749                                         DBG_PRINT(INFO_DBG,
750                                           "pci_alloc_consistent ");
751                                         DBG_PRINT(INFO_DBG, "failed for TxDL\n");
752                                         return -ENOMEM;
753                                 }
754                                 mem_allocated += PAGE_SIZE;
755                         }
756                         while (k < lst_per_page) {
757                                 int l = (j * lst_per_page) + k;
758                                 if (l == config->tx_cfg[i].fifo_len)
759                                         break;
760                                 mac_control->fifos[i].list_info[l].list_virt_addr =
761                                     tmp_v + (k * lst_size);
762                                 mac_control->fifos[i].list_info[l].list_phy_addr =
763                                     tmp_p + (k * lst_size);
764                                 k++;
765                         }
766                 }
767         }
768
769         for (i = 0; i < config->tx_fifo_num; i++) {
770                 size = config->tx_cfg[i].fifo_len;
771                 mac_control->fifos[i].ufo_in_band_v
772                         = kcalloc(size, sizeof(u64), GFP_KERNEL);
773                 if (!mac_control->fifos[i].ufo_in_band_v)
774                         return -ENOMEM;
775                 mem_allocated += (size * sizeof(u64));
776         }
777
778         /* Allocation and initialization of RXDs in Rings */
779         size = 0;
780         for (i = 0; i < config->rx_ring_num; i++) {
781                 if (config->rx_cfg[i].num_rxd %
782                     (rxd_count[nic->rxd_mode] + 1)) {
783                         DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
784                         DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
785                                   i);
786                         DBG_PRINT(ERR_DBG, "RxDs per Block");
787                         return FAILURE;
788                 }
789                 size += config->rx_cfg[i].num_rxd;
790                 mac_control->rings[i].block_count =
791                         config->rx_cfg[i].num_rxd /
792                         (rxd_count[nic->rxd_mode] + 1 );
793                 mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd -
794                         mac_control->rings[i].block_count;
795         }
796         if (nic->rxd_mode == RXD_MODE_1)
797                 size = (size * (sizeof(struct RxD1)));
798         else
799                 size = (size * (sizeof(struct RxD3)));
800
801         for (i = 0; i < config->rx_ring_num; i++) {
802                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
803                 mac_control->rings[i].rx_curr_get_info.offset = 0;
804                 mac_control->rings[i].rx_curr_get_info.ring_len =
805                     config->rx_cfg[i].num_rxd - 1;
806                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
807                 mac_control->rings[i].rx_curr_put_info.offset = 0;
808                 mac_control->rings[i].rx_curr_put_info.ring_len =
809                     config->rx_cfg[i].num_rxd - 1;
810                 mac_control->rings[i].nic = nic;
811                 mac_control->rings[i].ring_no = i;
812                 mac_control->rings[i].lro = lro_enable;
813
814                 blk_cnt = config->rx_cfg[i].num_rxd /
815                                 (rxd_count[nic->rxd_mode] + 1);
816                 /*  Allocating all the Rx blocks */
817                 for (j = 0; j < blk_cnt; j++) {
818                         struct rx_block_info *rx_blocks;
819                         int l;
820
821                         rx_blocks = &mac_control->rings[i].rx_blocks[j];
822                         size = SIZE_OF_BLOCK; //size is always page size
823                         tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
824                                                           &tmp_p_addr);
825                         if (tmp_v_addr == NULL) {
826                                 /*
827                                  * In case of failure, free_shared_mem()
828                                  * is called, which should free any
829                                  * memory that was alloced till the
830                                  * failure happened.
831                                  */
832                                 rx_blocks->block_virt_addr = tmp_v_addr;
833                                 return -ENOMEM;
834                         }
835                         mem_allocated += size;
836                         memset(tmp_v_addr, 0, size);
837                         rx_blocks->block_virt_addr = tmp_v_addr;
838                         rx_blocks->block_dma_addr = tmp_p_addr;
839                         rx_blocks->rxds = kmalloc(sizeof(struct rxd_info)*
840                                                   rxd_count[nic->rxd_mode],
841                                                   GFP_KERNEL);
842                         if (!rx_blocks->rxds)
843                                 return -ENOMEM;
844                         mem_allocated +=
845                         (sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
846                         for (l=0; l<rxd_count[nic->rxd_mode];l++) {
847                                 rx_blocks->rxds[l].virt_addr =
848                                         rx_blocks->block_virt_addr +
849                                         (rxd_size[nic->rxd_mode] * l);
850                                 rx_blocks->rxds[l].dma_addr =
851                                         rx_blocks->block_dma_addr +
852                                         (rxd_size[nic->rxd_mode] * l);
853                         }
854                 }
855                 /* Interlinking all Rx Blocks */
856                 for (j = 0; j < blk_cnt; j++) {
857                         tmp_v_addr =
858                                 mac_control->rings[i].rx_blocks[j].block_virt_addr;
859                         tmp_v_addr_next =
860                                 mac_control->rings[i].rx_blocks[(j + 1) %
861                                               blk_cnt].block_virt_addr;
862                         tmp_p_addr =
863                                 mac_control->rings[i].rx_blocks[j].block_dma_addr;
864                         tmp_p_addr_next =
865                                 mac_control->rings[i].rx_blocks[(j + 1) %
866                                               blk_cnt].block_dma_addr;
867
868                         pre_rxd_blk = (struct RxD_block *) tmp_v_addr;
869                         pre_rxd_blk->reserved_2_pNext_RxD_block =
870                             (unsigned long) tmp_v_addr_next;
871                         pre_rxd_blk->pNext_RxD_Blk_physical =
872                             (u64) tmp_p_addr_next;
873                 }
874         }
875         if (nic->rxd_mode == RXD_MODE_3B) {
876                 /*
877                  * Allocation of Storages for buffer addresses in 2BUFF mode
878                  * and the buffers as well.
879                  */
880                 for (i = 0; i < config->rx_ring_num; i++) {
881                         blk_cnt = config->rx_cfg[i].num_rxd /
882                            (rxd_count[nic->rxd_mode]+ 1);
883                         mac_control->rings[i].ba =
884                                 kmalloc((sizeof(struct buffAdd *) * blk_cnt),
885                                      GFP_KERNEL);
886                         if (!mac_control->rings[i].ba)
887                                 return -ENOMEM;
888                         mem_allocated +=(sizeof(struct buffAdd *) * blk_cnt);
889                         for (j = 0; j < blk_cnt; j++) {
890                                 int k = 0;
891                                 mac_control->rings[i].ba[j] =
892                                         kmalloc((sizeof(struct buffAdd) *
893                                                 (rxd_count[nic->rxd_mode] + 1)),
894                                                 GFP_KERNEL);
895                                 if (!mac_control->rings[i].ba[j])
896                                         return -ENOMEM;
897                                 mem_allocated += (sizeof(struct buffAdd) *  \
898                                         (rxd_count[nic->rxd_mode] + 1));
899                                 while (k != rxd_count[nic->rxd_mode]) {
900                                         ba = &mac_control->rings[i].ba[j][k];
901
902                                         ba->ba_0_org = (void *) kmalloc
903                                             (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
904                                         if (!ba->ba_0_org)
905                                                 return -ENOMEM;
906                                         mem_allocated +=
907                                                 (BUF0_LEN + ALIGN_SIZE);
908                                         tmp = (unsigned long)ba->ba_0_org;
909                                         tmp += ALIGN_SIZE;
910                                         tmp &= ~((unsigned long) ALIGN_SIZE);
911                                         ba->ba_0 = (void *) tmp;
912
913                                         ba->ba_1_org = (void *) kmalloc
914                                             (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
915                                         if (!ba->ba_1_org)
916                                                 return -ENOMEM;
917                                         mem_allocated
918                                                 += (BUF1_LEN + ALIGN_SIZE);
919                                         tmp = (unsigned long) ba->ba_1_org;
920                                         tmp += ALIGN_SIZE;
921                                         tmp &= ~((unsigned long) ALIGN_SIZE);
922                                         ba->ba_1 = (void *) tmp;
923                                         k++;
924                                 }
925                         }
926                 }
927         }
928
929         /* Allocation and initialization of Statistics block */
930         size = sizeof(struct stat_block);
931         mac_control->stats_mem = pci_alloc_consistent
932             (nic->pdev, size, &mac_control->stats_mem_phy);
933
934         if (!mac_control->stats_mem) {
935                 /*
936                  * In case of failure, free_shared_mem() is called, which
937                  * should free any memory that was alloced till the
938                  * failure happened.
939                  */
940                 return -ENOMEM;
941         }
942         mem_allocated += size;
943         mac_control->stats_mem_sz = size;
944
945         tmp_v_addr = mac_control->stats_mem;
946         mac_control->stats_info = (struct stat_block *) tmp_v_addr;
947         memset(tmp_v_addr, 0, size);
948         DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
949                   (unsigned long long) tmp_p_addr);
950         mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
951         return SUCCESS;
952 }
953
954 /**
955  * free_shared_mem - Free the allocated Memory
956  * @nic:  Device private variable.
957  * Description: This function is to free all memory locations allocated by
958  * the init_shared_mem() function and return it to the kernel.
959  */
960
961 static void free_shared_mem(struct s2io_nic *nic)
962 {
963         int i, j, blk_cnt, size;
964         void *tmp_v_addr;
965         dma_addr_t tmp_p_addr;
966         struct mac_info *mac_control;
967         struct config_param *config;
968         int lst_size, lst_per_page;
969         struct net_device *dev;
970         int page_num = 0;
971
972         if (!nic)
973                 return;
974
975         dev = nic->dev;
976
977         mac_control = &nic->mac_control;
978         config = &nic->config;
979
980         lst_size = (sizeof(struct TxD) * config->max_txds);
981         lst_per_page = PAGE_SIZE / lst_size;
982
983         for (i = 0; i < config->tx_fifo_num; i++) {
984                 page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
985                                                         lst_per_page);
986                 for (j = 0; j < page_num; j++) {
987                         int mem_blks = (j * lst_per_page);
988                         if (!mac_control->fifos[i].list_info)
989                                 return;
990                         if (!mac_control->fifos[i].list_info[mem_blks].
991                                  list_virt_addr)
992                                 break;
993                         pci_free_consistent(nic->pdev, PAGE_SIZE,
994                                             mac_control->fifos[i].
995                                             list_info[mem_blks].
996                                             list_virt_addr,
997                                             mac_control->fifos[i].
998                                             list_info[mem_blks].
999                                             list_phy_addr);
1000                         nic->mac_control.stats_info->sw_stat.mem_freed
1001                                                 += PAGE_SIZE;
1002                 }
1003                 /* If we got a zero DMA address during allocation,
1004                  * free the page now
1005                  */
1006                 if (mac_control->zerodma_virt_addr) {
1007                         pci_free_consistent(nic->pdev, PAGE_SIZE,
1008                                             mac_control->zerodma_virt_addr,
1009                                             (dma_addr_t)0);
1010                         DBG_PRINT(INIT_DBG,
1011                                 "%s: Freeing TxDL with zero DMA addr. ",
1012                                 dev->name);
1013                         DBG_PRINT(INIT_DBG, "Virtual address %p\n",
1014                                 mac_control->zerodma_virt_addr);
1015                         nic->mac_control.stats_info->sw_stat.mem_freed
1016                                                 += PAGE_SIZE;
1017                 }
1018                 kfree(mac_control->fifos[i].list_info);
1019                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1020                 (nic->config.tx_cfg[i].fifo_len *sizeof(struct list_info_hold));
1021         }
1022
1023         size = SIZE_OF_BLOCK;
1024         for (i = 0; i < config->rx_ring_num; i++) {
1025                 blk_cnt = mac_control->rings[i].block_count;
1026                 for (j = 0; j < blk_cnt; j++) {
1027                         tmp_v_addr = mac_control->rings[i].rx_blocks[j].
1028                                 block_virt_addr;
1029                         tmp_p_addr = mac_control->rings[i].rx_blocks[j].
1030                                 block_dma_addr;
1031                         if (tmp_v_addr == NULL)
1032                                 break;
1033                         pci_free_consistent(nic->pdev, size,
1034                                             tmp_v_addr, tmp_p_addr);
1035                         nic->mac_control.stats_info->sw_stat.mem_freed += size;
1036                         kfree(mac_control->rings[i].rx_blocks[j].rxds);
1037                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1038                         ( sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
1039                 }
1040         }
1041
1042         if (nic->rxd_mode == RXD_MODE_3B) {
1043                 /* Freeing buffer storage addresses in 2BUFF mode. */
1044                 for (i = 0; i < config->rx_ring_num; i++) {
1045                         blk_cnt = config->rx_cfg[i].num_rxd /
1046                             (rxd_count[nic->rxd_mode] + 1);
1047                         for (j = 0; j < blk_cnt; j++) {
1048                                 int k = 0;
1049                                 if (!mac_control->rings[i].ba[j])
1050                                         continue;
1051                                 while (k != rxd_count[nic->rxd_mode]) {
1052                                         struct buffAdd *ba =
1053                                                 &mac_control->rings[i].ba[j][k];
1054                                         kfree(ba->ba_0_org);
1055                                         nic->mac_control.stats_info->sw_stat.\
1056                                         mem_freed += (BUF0_LEN + ALIGN_SIZE);
1057                                         kfree(ba->ba_1_org);
1058                                         nic->mac_control.stats_info->sw_stat.\
1059                                         mem_freed += (BUF1_LEN + ALIGN_SIZE);
1060                                         k++;
1061                                 }
1062                                 kfree(mac_control->rings[i].ba[j]);
1063                                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1064                                         (sizeof(struct buffAdd) *
1065                                         (rxd_count[nic->rxd_mode] + 1));
1066                         }
1067                         kfree(mac_control->rings[i].ba);
1068                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1069                         (sizeof(struct buffAdd *) * blk_cnt);
1070                 }
1071         }
1072
1073         for (i = 0; i < nic->config.tx_fifo_num; i++) {
1074                 if (mac_control->fifos[i].ufo_in_band_v) {
1075                         nic->mac_control.stats_info->sw_stat.mem_freed
1076                                 += (config->tx_cfg[i].fifo_len * sizeof(u64));
1077                         kfree(mac_control->fifos[i].ufo_in_band_v);
1078                 }
1079         }
1080
1081         if (mac_control->stats_mem) {
1082                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1083                         mac_control->stats_mem_sz;
1084                 pci_free_consistent(nic->pdev,
1085                                     mac_control->stats_mem_sz,
1086                                     mac_control->stats_mem,
1087                                     mac_control->stats_mem_phy);
1088         }
1089 }
1090
1091 /**
1092  * s2io_verify_pci_mode -
1093  */
1094
1095 static int s2io_verify_pci_mode(struct s2io_nic *nic)
1096 {
1097         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1098         register u64 val64 = 0;
1099         int     mode;
1100
1101         val64 = readq(&bar0->pci_mode);
1102         mode = (u8)GET_PCI_MODE(val64);
1103
1104         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1105                 return -1;      /* Unknown PCI mode */
1106         return mode;
1107 }
1108
1109 #define NEC_VENID   0x1033
1110 #define NEC_DEVID   0x0125
1111 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
1112 {
1113         struct pci_dev *tdev = NULL;
1114         while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
1115                 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
1116                         if (tdev->bus == s2io_pdev->bus->parent) {
1117                                 pci_dev_put(tdev);
1118                                 return 1;
1119                         }
1120                 }
1121         }
1122         return 0;
1123 }
1124
1125 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
1126 /**
1127  * s2io_print_pci_mode -
1128  */
1129 static int s2io_print_pci_mode(struct s2io_nic *nic)
1130 {
1131         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1132         register u64 val64 = 0;
1133         int     mode;
1134         struct config_param *config = &nic->config;
1135
1136         val64 = readq(&bar0->pci_mode);
1137         mode = (u8)GET_PCI_MODE(val64);
1138
1139         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1140                 return -1;      /* Unknown PCI mode */
1141
1142         config->bus_speed = bus_speed[mode];
1143
1144         if (s2io_on_nec_bridge(nic->pdev)) {
1145                 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
1146                                                         nic->dev->name);
1147                 return mode;
1148         }
1149
1150         if (val64 & PCI_MODE_32_BITS) {
1151                 DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
1152         } else {
1153                 DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
1154         }
1155
1156         switch(mode) {
1157                 case PCI_MODE_PCI_33:
1158                         DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
1159                         break;
1160                 case PCI_MODE_PCI_66:
1161                         DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
1162                         break;
1163                 case PCI_MODE_PCIX_M1_66:
1164                         DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
1165                         break;
1166                 case PCI_MODE_PCIX_M1_100:
1167                         DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
1168                         break;
1169                 case PCI_MODE_PCIX_M1_133:
1170                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
1171                         break;
1172                 case PCI_MODE_PCIX_M2_66:
1173                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
1174                         break;
1175                 case PCI_MODE_PCIX_M2_100:
1176                         DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
1177                         break;
1178                 case PCI_MODE_PCIX_M2_133:
1179                         DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
1180                         break;
1181                 default:
1182                         return -1;      /* Unsupported bus speed */
1183         }
1184
1185         return mode;
1186 }
1187
1188 /**
1189  *  init_tti - Initialization transmit traffic interrupt scheme
1190  *  @nic: device private variable
1191  *  @link: link status (UP/DOWN) used to enable/disable continuous
1192  *  transmit interrupts
1193  *  Description: The function configures transmit traffic interrupts
1194  *  Return Value:  SUCCESS on success and
1195  *  '-1' on failure
1196  */
1197
1198 static int init_tti(struct s2io_nic *nic, int link)
1199 {
1200         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1201         register u64 val64 = 0;
1202         int i;
1203         struct config_param *config;
1204
1205         config = &nic->config;
1206
1207         for (i = 0; i < config->tx_fifo_num; i++) {
1208                 /*
1209                  * TTI Initialization. Default Tx timer gets us about
1210                  * 250 interrupts per sec. Continuous interrupts are enabled
1211                  * by default.
1212                  */
1213                 if (nic->device_type == XFRAME_II_DEVICE) {
1214                         int count = (nic->config.bus_speed * 125)/2;
1215                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1216                 } else
1217                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1218
1219                 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1220                                 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1221                                 TTI_DATA1_MEM_TX_URNG_C(0x30) |
1222                                 TTI_DATA1_MEM_TX_TIMER_AC_EN;
1223                 if (i == 0)
1224                         if (use_continuous_tx_intrs && (link == LINK_UP))
1225                                 val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1226                 writeq(val64, &bar0->tti_data1_mem);
1227
1228                 if (nic->config.intr_type == MSI_X) {
1229                         val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1230                                 TTI_DATA2_MEM_TX_UFC_B(0x100) |
1231                                 TTI_DATA2_MEM_TX_UFC_C(0x200) |
1232                                 TTI_DATA2_MEM_TX_UFC_D(0x300);
1233                 } else {
1234                         if ((nic->config.tx_steering_type ==
1235                                 TX_DEFAULT_STEERING) &&
1236                                 (config->tx_fifo_num > 1) &&
1237                                 (i >= nic->udp_fifo_idx) &&
1238                                 (i < (nic->udp_fifo_idx +
1239                                 nic->total_udp_fifos)))
1240                                 val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
1241                                         TTI_DATA2_MEM_TX_UFC_B(0x80) |
1242                                         TTI_DATA2_MEM_TX_UFC_C(0x100) |
1243                                         TTI_DATA2_MEM_TX_UFC_D(0x120);
1244                         else
1245                                 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1246                                         TTI_DATA2_MEM_TX_UFC_B(0x20) |
1247                                         TTI_DATA2_MEM_TX_UFC_C(0x40) |
1248                                         TTI_DATA2_MEM_TX_UFC_D(0x80);
1249                 }
1250
1251                 writeq(val64, &bar0->tti_data2_mem);
1252
1253                 val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD |
1254                                 TTI_CMD_MEM_OFFSET(i);
1255                 writeq(val64, &bar0->tti_command_mem);
1256
1257                 if (wait_for_cmd_complete(&bar0->tti_command_mem,
1258                         TTI_CMD_MEM_STROBE_NEW_CMD, S2IO_BIT_RESET) != SUCCESS)
1259                         return FAILURE;
1260         }
1261
1262         return SUCCESS;
1263 }
1264
1265 /**
1266  *  init_nic - Initialization of hardware
1267  *  @nic: device private variable
1268  *  Description: The function sequentially configures every block
1269  *  of the H/W from their reset values.
1270  *  Return Value:  SUCCESS on success and
1271  *  '-1' on failure (endian settings incorrect).
1272  */
1273
1274 static int init_nic(struct s2io_nic *nic)
1275 {
1276         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1277         struct net_device *dev = nic->dev;
1278         register u64 val64 = 0;
1279         void __iomem *add;
1280         u32 time;
1281         int i, j;
1282         struct mac_info *mac_control;
1283         struct config_param *config;
1284         int dtx_cnt = 0;
1285         unsigned long long mem_share;
1286         int mem_size;
1287
1288         mac_control = &nic->mac_control;
1289         config = &nic->config;
1290
1291         /* to set the swapper controle on the card */
1292         if(s2io_set_swapper(nic)) {
1293                 DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
1294                 return -EIO;
1295         }
1296
1297         /*
1298          * Herc requires EOI to be removed from reset before XGXS, so..
1299          */
1300         if (nic->device_type & XFRAME_II_DEVICE) {
1301                 val64 = 0xA500000000ULL;
1302                 writeq(val64, &bar0->sw_reset);
1303                 msleep(500);
1304                 val64 = readq(&bar0->sw_reset);
1305         }
1306
1307         /* Remove XGXS from reset state */
1308         val64 = 0;
1309         writeq(val64, &bar0->sw_reset);
1310         msleep(500);
1311         val64 = readq(&bar0->sw_reset);
1312
1313         /* Ensure that it's safe to access registers by checking
1314          * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1315          */
1316         if (nic->device_type == XFRAME_II_DEVICE) {
1317                 for (i = 0; i < 50; i++) {
1318                         val64 = readq(&bar0->adapter_status);
1319                         if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
1320                                 break;
1321                         msleep(10);
1322                 }
1323                 if (i == 50)
1324                         return -ENODEV;
1325         }
1326
1327         /*  Enable Receiving broadcasts */
1328         add = &bar0->mac_cfg;
1329         val64 = readq(&bar0->mac_cfg);
1330         val64 |= MAC_RMAC_BCAST_ENABLE;
1331         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1332         writel((u32) val64, add);
1333         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1334         writel((u32) (val64 >> 32), (add + 4));
1335
1336         /* Read registers in all blocks */
1337         val64 = readq(&bar0->mac_int_mask);
1338         val64 = readq(&bar0->mc_int_mask);
1339         val64 = readq(&bar0->xgxs_int_mask);
1340
1341         /*  Set MTU */
1342         val64 = dev->mtu;
1343         writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
1344
1345         if (nic->device_type & XFRAME_II_DEVICE) {
1346                 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
1347                         SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
1348                                           &bar0->dtx_control, UF);
1349                         if (dtx_cnt & 0x1)
1350                                 msleep(1); /* Necessary!! */
1351                         dtx_cnt++;
1352                 }
1353         } else {
1354                 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
1355                         SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
1356                                           &bar0->dtx_control, UF);
1357                         val64 = readq(&bar0->dtx_control);
1358                         dtx_cnt++;
1359                 }
1360         }
1361
1362         /*  Tx DMA Initialization */
1363         val64 = 0;
1364         writeq(val64, &bar0->tx_fifo_partition_0);
1365         writeq(val64, &bar0->tx_fifo_partition_1);
1366         writeq(val64, &bar0->tx_fifo_partition_2);
1367         writeq(val64, &bar0->tx_fifo_partition_3);
1368
1369
1370         for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
1371                 val64 |=
1372                     vBIT(config->tx_cfg[i].fifo_len - 1, ((j * 32) + 19),
1373                          13) | vBIT(config->tx_cfg[i].fifo_priority,
1374                                     ((j * 32) + 5), 3);
1375
1376                 if (i == (config->tx_fifo_num - 1)) {
1377                         if (i % 2 == 0)
1378                                 i++;
1379                 }
1380
1381                 switch (i) {
1382                 case 1:
1383                         writeq(val64, &bar0->tx_fifo_partition_0);
1384                         val64 = 0;
1385                         j = 0;
1386                         break;
1387                 case 3:
1388                         writeq(val64, &bar0->tx_fifo_partition_1);
1389                         val64 = 0;
1390                         j = 0;
1391                         break;
1392                 case 5:
1393                         writeq(val64, &bar0->tx_fifo_partition_2);
1394                         val64 = 0;
1395                         j = 0;
1396                         break;
1397                 case 7:
1398                         writeq(val64, &bar0->tx_fifo_partition_3);
1399                         val64 = 0;
1400                         j = 0;
1401                         break;
1402                 default:
1403                         j++;
1404                         break;
1405                 }
1406         }
1407
1408         /*
1409          * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1410          * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1411          */
1412         if ((nic->device_type == XFRAME_I_DEVICE) &&
1413                 (nic->pdev->revision < 4))
1414                 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
1415
1416         val64 = readq(&bar0->tx_fifo_partition_0);
1417         DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1418                   &bar0->tx_fifo_partition_0, (unsigned long long) val64);
1419
1420         /*
1421          * Initialization of Tx_PA_CONFIG register to ignore packet
1422          * integrity checking.
1423          */
1424         val64 = readq(&bar0->tx_pa_cfg);
1425         val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
1426             TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
1427         writeq(val64, &bar0->tx_pa_cfg);
1428
1429         /* Rx DMA intialization. */
1430         val64 = 0;
1431         for (i = 0; i < config->rx_ring_num; i++) {
1432                 val64 |=
1433                     vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
1434                          3);
1435         }
1436         writeq(val64, &bar0->rx_queue_priority);
1437
1438         /*
1439          * Allocating equal share of memory to all the
1440          * configured Rings.
1441          */
1442         val64 = 0;
1443         if (nic->device_type & XFRAME_II_DEVICE)
1444                 mem_size = 32;
1445         else
1446                 mem_size = 64;
1447
1448         for (i = 0; i < config->rx_ring_num; i++) {
1449                 switch (i) {
1450                 case 0:
1451                         mem_share = (mem_size / config->rx_ring_num +
1452                                      mem_size % config->rx_ring_num);
1453                         val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
1454                         continue;
1455                 case 1:
1456                         mem_share = (mem_size / config->rx_ring_num);
1457                         val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
1458                         continue;
1459                 case 2:
1460                         mem_share = (mem_size / config->rx_ring_num);
1461                         val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
1462                         continue;
1463                 case 3:
1464                         mem_share = (mem_size / config->rx_ring_num);
1465                         val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
1466                         continue;
1467                 case 4:
1468                         mem_share = (mem_size / config->rx_ring_num);
1469                         val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
1470                         continue;
1471                 case 5:
1472                         mem_share = (mem_size / config->rx_ring_num);
1473                         val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
1474                         continue;
1475                 case 6:
1476                         mem_share = (mem_size / config->rx_ring_num);
1477                         val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
1478                         continue;
1479                 case 7:
1480                         mem_share = (mem_size / config->rx_ring_num);
1481                         val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1482                         continue;
1483                 }
1484         }
1485         writeq(val64, &bar0->rx_queue_cfg);
1486
1487         /*
1488          * Filling Tx round robin registers
1489          * as per the number of FIFOs for equal scheduling priority
1490          */
1491         switch (config->tx_fifo_num) {
1492         case 1:
1493                 val64 = 0x0;
1494                 writeq(val64, &bar0->tx_w_round_robin_0);
1495                 writeq(val64, &bar0->tx_w_round_robin_1);
1496                 writeq(val64, &bar0->tx_w_round_robin_2);
1497                 writeq(val64, &bar0->tx_w_round_robin_3);
1498                 writeq(val64, &bar0->tx_w_round_robin_4);
1499                 break;
1500         case 2:
1501                 val64 = 0x0001000100010001ULL;
1502                 writeq(val64, &bar0->tx_w_round_robin_0);
1503                 writeq(val64, &bar0->tx_w_round_robin_1);
1504                 writeq(val64, &bar0->tx_w_round_robin_2);
1505                 writeq(val64, &bar0->tx_w_round_robin_3);
1506                 val64 = 0x0001000100000000ULL;
1507                 writeq(val64, &bar0->tx_w_round_robin_4);
1508                 break;
1509         case 3:
1510                 val64 = 0x0001020001020001ULL;
1511                 writeq(val64, &bar0->tx_w_round_robin_0);
1512                 val64 = 0x0200010200010200ULL;
1513                 writeq(val64, &bar0->tx_w_round_robin_1);
1514                 val64 = 0x0102000102000102ULL;
1515                 writeq(val64, &bar0->tx_w_round_robin_2);
1516                 val64 = 0x0001020001020001ULL;
1517                 writeq(val64, &bar0->tx_w_round_robin_3);
1518                 val64 = 0x0200010200000000ULL;
1519                 writeq(val64, &bar0->tx_w_round_robin_4);
1520                 break;
1521         case 4:
1522                 val64 = 0x0001020300010203ULL;
1523                 writeq(val64, &bar0->tx_w_round_robin_0);
1524                 writeq(val64, &bar0->tx_w_round_robin_1);
1525                 writeq(val64, &bar0->tx_w_round_robin_2);
1526                 writeq(val64, &bar0->tx_w_round_robin_3);
1527                 val64 = 0x0001020300000000ULL;
1528                 writeq(val64, &bar0->tx_w_round_robin_4);
1529                 break;
1530         case 5:
1531                 val64 = 0x0001020304000102ULL;
1532                 writeq(val64, &bar0->tx_w_round_robin_0);
1533                 val64 = 0x0304000102030400ULL;
1534                 writeq(val64, &bar0->tx_w_round_robin_1);
1535                 val64 = 0x0102030400010203ULL;
1536                 writeq(val64, &bar0->tx_w_round_robin_2);
1537                 val64 = 0x0400010203040001ULL;
1538                 writeq(val64, &bar0->tx_w_round_robin_3);
1539                 val64 = 0x0203040000000000ULL;
1540                 writeq(val64, &bar0->tx_w_round_robin_4);
1541                 break;
1542         case 6:
1543                 val64 = 0x0001020304050001ULL;
1544                 writeq(val64, &bar0->tx_w_round_robin_0);
1545                 val64 = 0x0203040500010203ULL;
1546                 writeq(val64, &bar0->tx_w_round_robin_1);
1547                 val64 = 0x0405000102030405ULL;
1548                 writeq(val64, &bar0->tx_w_round_robin_2);
1549                 val64 = 0x0001020304050001ULL;
1550                 writeq(val64, &bar0->tx_w_round_robin_3);
1551                 val64 = 0x0203040500000000ULL;
1552                 writeq(val64, &bar0->tx_w_round_robin_4);
1553                 break;
1554         case 7:
1555                 val64 = 0x0001020304050600ULL;
1556                 writeq(val64, &bar0->tx_w_round_robin_0);
1557                 val64 = 0x0102030405060001ULL;
1558                 writeq(val64, &bar0->tx_w_round_robin_1);
1559                 val64 = 0x0203040506000102ULL;
1560                 writeq(val64, &bar0->tx_w_round_robin_2);
1561                 val64 = 0x0304050600010203ULL;
1562                 writeq(val64, &bar0->tx_w_round_robin_3);
1563                 val64 = 0x0405060000000000ULL;
1564                 writeq(val64, &bar0->tx_w_round_robin_4);
1565                 break;
1566         case 8:
1567                 val64 = 0x0001020304050607ULL;
1568                 writeq(val64, &bar0->tx_w_round_robin_0);
1569                 writeq(val64, &bar0->tx_w_round_robin_1);
1570                 writeq(val64, &bar0->tx_w_round_robin_2);
1571                 writeq(val64, &bar0->tx_w_round_robin_3);
1572                 val64 = 0x0001020300000000ULL;
1573                 writeq(val64, &bar0->tx_w_round_robin_4);
1574                 break;
1575         }
1576
1577         /* Enable all configured Tx FIFO partitions */
1578         val64 = readq(&bar0->tx_fifo_partition_0);
1579         val64 |= (TX_FIFO_PARTITION_EN);
1580         writeq(val64, &bar0->tx_fifo_partition_0);
1581
1582         /* Filling the Rx round robin registers as per the
1583          * number of Rings and steering based on QoS with
1584          * equal priority.
1585          */
1586         switch (config->rx_ring_num) {
1587         case 1:
1588                 val64 = 0x0;
1589                 writeq(val64, &bar0->rx_w_round_robin_0);
1590                 writeq(val64, &bar0->rx_w_round_robin_1);
1591                 writeq(val64, &bar0->rx_w_round_robin_2);
1592                 writeq(val64, &bar0->rx_w_round_robin_3);
1593                 writeq(val64, &bar0->rx_w_round_robin_4);
1594
1595                 val64 = 0x8080808080808080ULL;
1596                 writeq(val64, &bar0->rts_qos_steering);
1597                 break;
1598         case 2:
1599                 val64 = 0x0001000100010001ULL;
1600                 writeq(val64, &bar0->rx_w_round_robin_0);
1601                 writeq(val64, &bar0->rx_w_round_robin_1);
1602                 writeq(val64, &bar0->rx_w_round_robin_2);
1603                 writeq(val64, &bar0->rx_w_round_robin_3);
1604                 val64 = 0x0001000100000000ULL;
1605                 writeq(val64, &bar0->rx_w_round_robin_4);
1606
1607                 val64 = 0x8080808040404040ULL;
1608                 writeq(val64, &bar0->rts_qos_steering);
1609                 break;
1610         case 3:
1611                 val64 = 0x0001020001020001ULL;
1612                 writeq(val64, &bar0->rx_w_round_robin_0);
1613                 val64 = 0x0200010200010200ULL;
1614                 writeq(val64, &bar0->rx_w_round_robin_1);
1615                 val64 = 0x0102000102000102ULL;
1616                 writeq(val64, &bar0->rx_w_round_robin_2);
1617                 val64 = 0x0001020001020001ULL;
1618                 writeq(val64, &bar0->rx_w_round_robin_3);
1619                 val64 = 0x0200010200000000ULL;
1620                 writeq(val64, &bar0->rx_w_round_robin_4);
1621
1622                 val64 = 0x8080804040402020ULL;
1623                 writeq(val64, &bar0->rts_qos_steering);
1624                 break;
1625         case 4:
1626                 val64 = 0x0001020300010203ULL;
1627                 writeq(val64, &bar0->rx_w_round_robin_0);
1628                 writeq(val64, &bar0->rx_w_round_robin_1);
1629                 writeq(val64, &bar0->rx_w_round_robin_2);
1630                 writeq(val64, &bar0->rx_w_round_robin_3);
1631                 val64 = 0x0001020300000000ULL;
1632                 writeq(val64, &bar0->rx_w_round_robin_4);
1633
1634                 val64 = 0x8080404020201010ULL;
1635                 writeq(val64, &bar0->rts_qos_steering);
1636                 break;
1637         case 5:
1638                 val64 = 0x0001020304000102ULL;
1639                 writeq(val64, &bar0->rx_w_round_robin_0);
1640                 val64 = 0x0304000102030400ULL;
1641                 writeq(val64, &bar0->rx_w_round_robin_1);
1642                 val64 = 0x0102030400010203ULL;
1643                 writeq(val64, &bar0->rx_w_round_robin_2);
1644                 val64 = 0x0400010203040001ULL;
1645                 writeq(val64, &bar0->rx_w_round_robin_3);
1646                 val64 = 0x0203040000000000ULL;
1647                 writeq(val64, &bar0->rx_w_round_robin_4);
1648
1649                 val64 = 0x8080404020201008ULL;
1650                 writeq(val64, &bar0->rts_qos_steering);
1651                 break;
1652         case 6:
1653                 val64 = 0x0001020304050001ULL;
1654                 writeq(val64, &bar0->rx_w_round_robin_0);
1655                 val64 = 0x0203040500010203ULL;
1656                 writeq(val64, &bar0->rx_w_round_robin_1);
1657                 val64 = 0x0405000102030405ULL;
1658                 writeq(val64, &bar0->rx_w_round_robin_2);
1659                 val64 = 0x0001020304050001ULL;
1660                 writeq(val64, &bar0->rx_w_round_robin_3);
1661                 val64 = 0x0203040500000000ULL;
1662                 writeq(val64, &bar0->rx_w_round_robin_4);
1663
1664                 val64 = 0x8080404020100804ULL;
1665                 writeq(val64, &bar0->rts_qos_steering);
1666                 break;
1667         case 7:
1668                 val64 = 0x0001020304050600ULL;
1669                 writeq(val64, &bar0->rx_w_round_robin_0);
1670                 val64 = 0x0102030405060001ULL;
1671                 writeq(val64, &bar0->rx_w_round_robin_1);
1672                 val64 = 0x0203040506000102ULL;
1673                 writeq(val64, &bar0->rx_w_round_robin_2);
1674                 val64 = 0x0304050600010203ULL;
1675                 writeq(val64, &bar0->rx_w_round_robin_3);
1676                 val64 = 0x0405060000000000ULL;
1677                 writeq(val64, &bar0->rx_w_round_robin_4);
1678
1679                 val64 = 0x8080402010080402ULL;
1680                 writeq(val64, &bar0->rts_qos_steering);
1681                 break;
1682         case 8:
1683                 val64 = 0x0001020304050607ULL;
1684                 writeq(val64, &bar0->rx_w_round_robin_0);
1685                 writeq(val64, &bar0->rx_w_round_robin_1);
1686                 writeq(val64, &bar0->rx_w_round_robin_2);
1687                 writeq(val64, &bar0->rx_w_round_robin_3);
1688                 val64 = 0x0001020300000000ULL;
1689                 writeq(val64, &bar0->rx_w_round_robin_4);
1690
1691                 val64 = 0x8040201008040201ULL;
1692                 writeq(val64, &bar0->rts_qos_steering);
1693                 break;
1694         }
1695
1696         /* UDP Fix */
1697         val64 = 0;
1698         for (i = 0; i < 8; i++)
1699                 writeq(val64, &bar0->rts_frm_len_n[i]);
1700
1701         /* Set the default rts frame length for the rings configured */
1702         val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1703         for (i = 0 ; i < config->rx_ring_num ; i++)
1704                 writeq(val64, &bar0->rts_frm_len_n[i]);
1705
1706         /* Set the frame length for the configured rings
1707          * desired by the user
1708          */
1709         for (i = 0; i < config->rx_ring_num; i++) {
1710                 /* If rts_frm_len[i] == 0 then it is assumed that user not
1711                  * specified frame length steering.
1712                  * If the user provides the frame length then program
1713                  * the rts_frm_len register for those values or else
1714                  * leave it as it is.
1715                  */
1716                 if (rts_frm_len[i] != 0) {
1717                         writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1718                                 &bar0->rts_frm_len_n[i]);
1719                 }
1720         }
1721
1722         /* Disable differentiated services steering logic */
1723         for (i = 0; i < 64; i++) {
1724                 if (rts_ds_steer(nic, i, 0) == FAILURE) {
1725                         DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
1726                                 dev->name);
1727                         DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
1728                         return -ENODEV;
1729                 }
1730         }
1731
1732         /* Program statistics memory */
1733         writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1734
1735         if (nic->device_type == XFRAME_II_DEVICE) {
1736                 val64 = STAT_BC(0x320);
1737                 writeq(val64, &bar0->stat_byte_cnt);
1738         }
1739
1740         /*
1741          * Initializing the sampling rate for the device to calculate the
1742          * bandwidth utilization.
1743          */
1744         val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1745             MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1746         writeq(val64, &bar0->mac_link_util);
1747
1748         /*
1749          * Initializing the Transmit and Receive Traffic Interrupt
1750          * Scheme.
1751          */
1752
1753         /* Initialize TTI */
1754         if (SUCCESS != init_tti(nic, nic->last_link_state))
1755                 return -ENODEV;
1756
1757         /* RTI Initialization */
1758         if (nic->device_type == XFRAME_II_DEVICE) {
1759                 /*
1760                  * Programmed to generate Apprx 500 Intrs per
1761                  * second
1762                  */
1763                 int count = (nic->config.bus_speed * 125)/4;
1764                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1765         } else
1766                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1767         val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1768                  RTI_DATA1_MEM_RX_URNG_B(0x10) |
1769                  RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
1770
1771         writeq(val64, &bar0->rti_data1_mem);
1772
1773         val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1774                 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1775         if (nic->config.intr_type == MSI_X)
1776             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
1777                         RTI_DATA2_MEM_RX_UFC_D(0x40));
1778         else
1779             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
1780                         RTI_DATA2_MEM_RX_UFC_D(0x80));
1781         writeq(val64, &bar0->rti_data2_mem);
1782
1783         for (i = 0; i < config->rx_ring_num; i++) {
1784                 val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
1785                                 | RTI_CMD_MEM_OFFSET(i);
1786                 writeq(val64, &bar0->rti_command_mem);
1787
1788                 /*
1789                  * Once the operation completes, the Strobe bit of the
1790                  * command register will be reset. We poll for this
1791                  * particular condition. We wait for a maximum of 500ms
1792                  * for the operation to complete, if it's not complete
1793                  * by then we return error.
1794                  */
1795                 time = 0;
1796                 while (TRUE) {
1797                         val64 = readq(&bar0->rti_command_mem);
1798                         if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
1799                                 break;
1800
1801                         if (time > 10) {
1802                                 DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
1803                                           dev->name);
1804                                 return -ENODEV;
1805                         }
1806                         time++;
1807                         msleep(50);
1808                 }
1809         }
1810
1811         /*
1812          * Initializing proper values as Pause threshold into all
1813          * the 8 Queues on Rx side.
1814          */
1815         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1816         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1817
1818         /* Disable RMAC PAD STRIPPING */
1819         add = &bar0->mac_cfg;
1820         val64 = readq(&bar0->mac_cfg);
1821         val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1822         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1823         writel((u32) (val64), add);
1824         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1825         writel((u32) (val64 >> 32), (add + 4));
1826         val64 = readq(&bar0->mac_cfg);
1827
1828         /* Enable FCS stripping by adapter */
1829         add = &bar0->mac_cfg;
1830         val64 = readq(&bar0->mac_cfg);
1831         val64 |= MAC_CFG_RMAC_STRIP_FCS;
1832         if (nic->device_type == XFRAME_II_DEVICE)
1833                 writeq(val64, &bar0->mac_cfg);
1834         else {
1835                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1836                 writel((u32) (val64), add);
1837                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1838                 writel((u32) (val64 >> 32), (add + 4));
1839         }
1840
1841         /*
1842          * Set the time value to be inserted in the pause frame
1843          * generated by xena.
1844          */
1845         val64 = readq(&bar0->rmac_pause_cfg);
1846         val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1847         val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1848         writeq(val64, &bar0->rmac_pause_cfg);
1849
1850         /*
1851          * Set the Threshold Limit for Generating the pause frame
1852          * If the amount of data in any Queue exceeds ratio of
1853          * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1854          * pause frame is generated
1855          */
1856         val64 = 0;
1857         for (i = 0; i < 4; i++) {
1858                 val64 |=
1859                     (((u64) 0xFF00 | nic->mac_control.
1860                       mc_pause_threshold_q0q3)
1861                      << (i * 2 * 8));
1862         }
1863         writeq(val64, &bar0->mc_pause_thresh_q0q3);
1864
1865         val64 = 0;
1866         for (i = 0; i < 4; i++) {
1867                 val64 |=
1868                     (((u64) 0xFF00 | nic->mac_control.
1869                       mc_pause_threshold_q4q7)
1870                      << (i * 2 * 8));
1871         }
1872         writeq(val64, &bar0->mc_pause_thresh_q4q7);
1873
1874         /*
1875          * TxDMA will stop Read request if the number of read split has
1876          * exceeded the limit pointed by shared_splits
1877          */
1878         val64 = readq(&bar0->pic_control);
1879         val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1880         writeq(val64, &bar0->pic_control);
1881
1882         if (nic->config.bus_speed == 266) {
1883                 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
1884                 writeq(0x0, &bar0->read_retry_delay);
1885                 writeq(0x0, &bar0->write_retry_delay);
1886         }
1887
1888         /*
1889          * Programming the Herc to split every write transaction
1890          * that does not start on an ADB to reduce disconnects.
1891          */
1892         if (nic->device_type == XFRAME_II_DEVICE) {
1893                 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
1894                         MISC_LINK_STABILITY_PRD(3);
1895                 writeq(val64, &bar0->misc_control);
1896                 val64 = readq(&bar0->pic_control2);
1897                 val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
1898                 writeq(val64, &bar0->pic_control2);
1899         }
1900         if (strstr(nic->product_name, "CX4")) {
1901                 val64 = TMAC_AVG_IPG(0x17);
1902                 writeq(val64, &bar0->tmac_avg_ipg);
1903         }
1904
1905         return SUCCESS;
1906 }
1907 #define LINK_UP_DOWN_INTERRUPT          1
1908 #define MAC_RMAC_ERR_TIMER              2
1909
1910 static int s2io_link_fault_indication(struct s2io_nic *nic)
1911 {
1912         if (nic->config.intr_type != INTA)
1913                 return MAC_RMAC_ERR_TIMER;
1914         if (nic->device_type == XFRAME_II_DEVICE)
1915                 return LINK_UP_DOWN_INTERRUPT;
1916         else
1917                 return MAC_RMAC_ERR_TIMER;
1918 }
1919
1920 /**
1921  *  do_s2io_write_bits -  update alarm bits in alarm register
1922  *  @value: alarm bits
1923  *  @flag: interrupt status
1924  *  @addr: address value
1925  *  Description: update alarm bits in alarm register
1926  *  Return Value:
1927  *  NONE.
1928  */
1929 static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr)
1930 {
1931         u64 temp64;
1932
1933         temp64 = readq(addr);
1934
1935         if(flag == ENABLE_INTRS)
1936                 temp64 &= ~((u64) value);
1937         else
1938                 temp64 |= ((u64) value);
1939         writeq(temp64, addr);
1940 }
1941
1942 static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
1943 {
1944         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1945         register u64 gen_int_mask = 0;
1946
1947         if (mask & TX_DMA_INTR) {
1948
1949                 gen_int_mask |= TXDMA_INT_M;
1950
1951                 do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
1952                                 TXDMA_PCC_INT | TXDMA_TTI_INT |
1953                                 TXDMA_LSO_INT | TXDMA_TPA_INT |
1954                                 TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
1955
1956                 do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
1957                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
1958                                 PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
1959                                 &bar0->pfc_err_mask);
1960
1961                 do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
1962                                 TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
1963                                 TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
1964
1965                 do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
1966                                 PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
1967                                 PCC_N_SERR | PCC_6_COF_OV_ERR |
1968                                 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
1969                                 PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
1970                                 PCC_TXB_ECC_SG_ERR, flag, &bar0->pcc_err_mask);
1971
1972                 do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
1973                                 TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
1974
1975                 do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
1976                                 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
1977                                 LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
1978                                 flag, &bar0->lso_err_mask);
1979
1980                 do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
1981                                 flag, &bar0->tpa_err_mask);
1982
1983                 do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
1984
1985         }
1986
1987         if (mask & TX_MAC_INTR) {
1988                 gen_int_mask |= TXMAC_INT_M;
1989                 do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
1990                                 &bar0->mac_int_mask);
1991                 do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
1992                                 TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
1993                                 TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
1994                                 flag, &bar0->mac_tmac_err_mask);
1995         }
1996
1997         if (mask & TX_XGXS_INTR) {
1998                 gen_int_mask |= TXXGXS_INT_M;
1999                 do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
2000                                 &bar0->xgxs_int_mask);
2001                 do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
2002                                 TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
2003                                 flag, &bar0->xgxs_txgxs_err_mask);
2004         }
2005
2006         if (mask & RX_DMA_INTR) {
2007                 gen_int_mask |= RXDMA_INT_M;
2008                 do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
2009                                 RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
2010                                 flag, &bar0->rxdma_int_mask);
2011                 do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
2012                                 RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
2013                                 RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
2014                                 RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
2015                 do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
2016                                 PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
2017                                 PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
2018                                 &bar0->prc_pcix_err_mask);
2019                 do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
2020                                 RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
2021                                 &bar0->rpa_err_mask);
2022                 do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
2023                                 RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
2024                                 RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
2025                                 RDA_FRM_ECC_SG_ERR | RDA_MISC_ERR|RDA_PCIX_ERR,
2026                                 flag, &bar0->rda_err_mask);
2027                 do_s2io_write_bits(RTI_SM_ERR_ALARM |
2028                                 RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
2029                                 flag, &bar0->rti_err_mask);
2030         }
2031
2032         if (mask & RX_MAC_INTR) {
2033                 gen_int_mask |= RXMAC_INT_M;
2034                 do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
2035                                 &bar0->mac_int_mask);
2036                 do_s2io_write_bits(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
2037                                 RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
2038                                 RMAC_DOUBLE_ECC_ERR |
2039                                 RMAC_LINK_STATE_CHANGE_INT,
2040                                 flag, &bar0->mac_rmac_err_mask);
2041         }
2042
2043         if (mask & RX_XGXS_INTR)
2044         {
2045                 gen_int_mask |= RXXGXS_INT_M;
2046                 do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
2047                                 &bar0->xgxs_int_mask);
2048                 do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
2049                                 &bar0->xgxs_rxgxs_err_mask);
2050         }
2051
2052         if (mask & MC_INTR) {
2053                 gen_int_mask |= MC_INT_M;
2054                 do_s2io_write_bits(MC_INT_MASK_MC_INT, flag, &bar0->mc_int_mask);
2055                 do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
2056                                 MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
2057                                 &bar0->mc_err_mask);
2058         }
2059         nic->general_int_mask = gen_int_mask;
2060
2061         /* Remove this line when alarm interrupts are enabled */
2062         nic->general_int_mask = 0;
2063 }
2064 /**
2065  *  en_dis_able_nic_intrs - Enable or Disable the interrupts
2066  *  @nic: device private variable,
2067  *  @mask: A mask indicating which Intr block must be modified and,
2068  *  @flag: A flag indicating whether to enable or disable the Intrs.
2069  *  Description: This function will either disable or enable the interrupts
2070  *  depending on the flag argument. The mask argument can be used to
2071  *  enable/disable any Intr block.
2072  *  Return Value: NONE.
2073  */
2074
2075 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
2076 {
2077         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2078         register u64 temp64 = 0, intr_mask = 0;
2079
2080         intr_mask = nic->general_int_mask;
2081
2082         /*  Top level interrupt classification */
2083         /*  PIC Interrupts */
2084         if (mask & TX_PIC_INTR) {
2085                 /*  Enable PIC Intrs in the general intr mask register */
2086                 intr_mask |= TXPIC_INT_M;
2087                 if (flag == ENABLE_INTRS) {
2088                         /*
2089                          * If Hercules adapter enable GPIO otherwise
2090                          * disable all PCIX, Flash, MDIO, IIC and GPIO
2091                          * interrupts for now.
2092                          * TODO
2093                          */
2094                         if (s2io_link_fault_indication(nic) ==
2095                                         LINK_UP_DOWN_INTERRUPT ) {
2096                                 do_s2io_write_bits(PIC_INT_GPIO, flag,
2097                                                 &bar0->pic_int_mask);
2098                                 do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
2099                                                 &bar0->gpio_int_mask);
2100                         } else
2101                                 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2102                 } else if (flag == DISABLE_INTRS) {
2103                         /*
2104                          * Disable PIC Intrs in the general
2105                          * intr mask register
2106                          */
2107                         writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2108                 }
2109         }
2110
2111         /*  Tx traffic interrupts */
2112         if (mask & TX_TRAFFIC_INTR) {
2113                 intr_mask |= TXTRAFFIC_INT_M;
2114                 if (flag == ENABLE_INTRS) {
2115                         /*
2116                          * Enable all the Tx side interrupts
2117                          * writing 0 Enables all 64 TX interrupt levels
2118                          */
2119                         writeq(0x0, &bar0->tx_traffic_mask);
2120                 } else if (flag == DISABLE_INTRS) {
2121                         /*
2122                          * Disable Tx Traffic Intrs in the general intr mask
2123                          * register.
2124                          */
2125                         writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
2126                 }
2127         }
2128
2129         /*  Rx traffic interrupts */
2130         if (mask & RX_TRAFFIC_INTR) {
2131                 intr_mask |= RXTRAFFIC_INT_M;
2132                 if (flag == ENABLE_INTRS) {
2133                         /* writing 0 Enables all 8 RX interrupt levels */
2134                         writeq(0x0, &bar0->rx_traffic_mask);
2135                 } else if (flag == DISABLE_INTRS) {
2136                         /*
2137                          * Disable Rx Traffic Intrs in the general intr mask
2138                          * register.
2139                          */
2140                         writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
2141                 }
2142         }
2143
2144         temp64 = readq(&bar0->general_int_mask);
2145         if (flag == ENABLE_INTRS)
2146                 temp64 &= ~((u64) intr_mask);
2147         else
2148                 temp64 = DISABLE_ALL_INTRS;
2149         writeq(temp64, &bar0->general_int_mask);
2150
2151         nic->general_int_mask = readq(&bar0->general_int_mask);
2152 }
2153
2154 /**
2155  *  verify_pcc_quiescent- Checks for PCC quiescent state
2156  *  Return: 1 If PCC is quiescence
2157  *          0 If PCC is not quiescence
2158  */
2159 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
2160 {
2161         int ret = 0, herc;
2162         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2163         u64 val64 = readq(&bar0->adapter_status);
2164
2165         herc = (sp->device_type == XFRAME_II_DEVICE);
2166
2167         if (flag == FALSE) {
2168                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2169                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
2170                                 ret = 1;
2171                 } else {
2172                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2173                                 ret = 1;
2174                 }
2175         } else {
2176                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2177                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
2178                              ADAPTER_STATUS_RMAC_PCC_IDLE))
2179                                 ret = 1;
2180                 } else {
2181                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
2182                              ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2183                                 ret = 1;
2184                 }
2185         }
2186
2187         return ret;
2188 }
2189 /**
2190  *  verify_xena_quiescence - Checks whether the H/W is ready
2191  *  Description: Returns whether the H/W is ready to go or not. Depending
2192  *  on whether adapter enable bit was written or not the comparison
2193  *  differs and the calling function passes the input argument flag to
2194  *  indicate this.
2195  *  Return: 1 If xena is quiescence
2196  *          0 If Xena is not quiescence
2197  */
2198
2199 static int verify_xena_quiescence(struct s2io_nic *sp)
2200 {
2201         int  mode;
2202         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2203         u64 val64 = readq(&bar0->adapter_status);
2204         mode = s2io_verify_pci_mode(sp);
2205
2206         if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
2207                 DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
2208                 return 0;
2209         }
2210         if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
2211         DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
2212                 return 0;
2213         }
2214         if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
2215                 DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
2216                 return 0;
2217         }
2218         if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
2219                 DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
2220                 return 0;
2221         }
2222         if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
2223                 DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
2224                 return 0;
2225         }
2226         if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
2227                 DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
2228                 return 0;
2229         }
2230         if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
2231                 DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
2232                 return 0;
2233         }
2234         if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
2235                 DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
2236                 return 0;
2237         }
2238
2239         /*
2240          * In PCI 33 mode, the P_PLL is not used, and therefore,
2241          * the the P_PLL_LOCK bit in the adapter_status register will
2242          * not be asserted.
2243          */
2244         if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
2245                 sp->device_type == XFRAME_II_DEVICE && mode !=
2246                 PCI_MODE_PCI_33) {
2247                 DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
2248                 return 0;
2249         }
2250         if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
2251                         ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
2252                 DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
2253                 return 0;
2254         }
2255         return 1;
2256 }
2257
2258 /**
2259  * fix_mac_address -  Fix for Mac addr problem on Alpha platforms
2260  * @sp: Pointer to device specifc structure
2261  * Description :
2262  * New procedure to clear mac address reading  problems on Alpha platforms
2263  *
2264  */
2265
2266 static void fix_mac_address(struct s2io_nic * sp)
2267 {
2268         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2269         u64 val64;
2270         int i = 0;
2271
2272         while (fix_mac[i] != END_SIGN) {
2273                 writeq(fix_mac[i++], &bar0->gpio_control);
2274                 udelay(10);
2275                 val64 = readq(&bar0->gpio_control);
2276         }
2277 }
2278
2279 /**
2280  *  start_nic - Turns the device on
2281  *  @nic : device private variable.
2282  *  Description:
2283  *  This function actually turns the device on. Before this  function is
2284  *  called,all Registers are configured from their reset states
2285  *  and shared memory is allocated but the NIC is still quiescent. On
2286  *  calling this function, the device interrupts are cleared and the NIC is
2287  *  literally switched on by writing into the adapter control register.
2288  *  Return Value:
2289  *  SUCCESS on success and -1 on failure.
2290  */
2291
2292 static int start_nic(struct s2io_nic *nic)
2293 {
2294         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2295         struct net_device *dev = nic->dev;
2296         register u64 val64 = 0;
2297         u16 subid, i;
2298         struct mac_info *mac_control;
2299         struct config_param *config;
2300
2301         mac_control = &nic->mac_control;
2302         config = &nic->config;
2303
2304         /*  PRC Initialization and configuration */
2305         for (i = 0; i < config->rx_ring_num; i++) {
2306                 writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
2307                        &bar0->prc_rxd0_n[i]);
2308
2309                 val64 = readq(&bar0->prc_ctrl_n[i]);
2310                 if (nic->rxd_mode == RXD_MODE_1)
2311                         val64 |= PRC_CTRL_RC_ENABLED;
2312                 else
2313                         val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
2314                 if (nic->device_type == XFRAME_II_DEVICE)
2315                         val64 |= PRC_CTRL_GROUP_READS;
2316                 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
2317                 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
2318                 writeq(val64, &bar0->prc_ctrl_n[i]);
2319         }
2320
2321         if (nic->rxd_mode == RXD_MODE_3B) {
2322                 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
2323                 val64 = readq(&bar0->rx_pa_cfg);
2324                 val64 |= RX_PA_CFG_IGNORE_L2_ERR;
2325                 writeq(val64, &bar0->rx_pa_cfg);
2326         }
2327
2328         if (vlan_tag_strip == 0) {
2329                 val64 = readq(&bar0->rx_pa_cfg);
2330                 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
2331                 writeq(val64, &bar0->rx_pa_cfg);
2332                 vlan_strip_flag = 0;
2333         }
2334
2335         /*
2336          * Enabling MC-RLDRAM. After enabling the device, we timeout
2337          * for around 100ms, which is approximately the time required
2338          * for the device to be ready for operation.
2339          */
2340         val64 = readq(&bar0->mc_rldram_mrs);
2341         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
2342         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
2343         val64 = readq(&bar0->mc_rldram_mrs);
2344
2345         msleep(100);    /* Delay by around 100 ms. */
2346
2347         /* Enabling ECC Protection. */
2348         val64 = readq(&bar0->adapter_control);
2349         val64 &= ~ADAPTER_ECC_EN;
2350         writeq(val64, &bar0->adapter_control);
2351
2352         /*
2353          * Verify if the device is ready to be enabled, if so enable
2354          * it.
2355          */
2356         val64 = readq(&bar0->adapter_status);
2357         if (!verify_xena_quiescence(nic)) {
2358                 DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
2359                 DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
2360                           (unsigned long long) val64);
2361                 return FAILURE;
2362         }
2363
2364         /*
2365          * With some switches, link might be already up at this point.
2366          * Because of this weird behavior, when we enable laser,
2367          * we may not get link. We need to handle this. We cannot
2368          * figure out which switch is misbehaving. So we are forced to
2369          * make a global change.
2370          */
2371
2372         /* Enabling Laser. */
2373         val64 = readq(&bar0->adapter_control);
2374         val64 |= ADAPTER_EOI_TX_ON;
2375         writeq(val64, &bar0->adapter_control);
2376
2377         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
2378                 /*
2379                  * Dont see link state interrupts initally on some switches,
2380                  * so directly scheduling the link state task here.
2381                  */
2382                 schedule_work(&nic->set_link_task);
2383         }
2384         /* SXE-002: Initialize link and activity LED */
2385         subid = nic->pdev->subsystem_device;
2386         if (((subid & 0xFF) >= 0x07) &&
2387             (nic->device_type == XFRAME_I_DEVICE)) {
2388                 val64 = readq(&bar0->gpio_control);
2389                 val64 |= 0x0000800000000000ULL;
2390                 writeq(val64, &bar0->gpio_control);
2391                 val64 = 0x0411040400000000ULL;
2392                 writeq(val64, (void __iomem *)bar0 + 0x2700);
2393         }
2394
2395         return SUCCESS;
2396 }
2397 /**
2398  * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2399  */
2400 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct \
2401                                         TxD *txdlp, int get_off)
2402 {
2403         struct s2io_nic *nic = fifo_data->nic;
2404         struct sk_buff *skb;
2405         struct TxD *txds;
2406         u16 j, frg_cnt;
2407
2408         txds = txdlp;
2409         if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
2410                 pci_unmap_single(nic->pdev, (dma_addr_t)
2411                         txds->Buffer_Pointer, sizeof(u64),
2412                         PCI_DMA_TODEVICE);
2413                 txds++;
2414         }
2415
2416         skb = (struct sk_buff *) ((unsigned long)
2417                         txds->Host_Control);
2418         if (!skb) {
2419                 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2420                 return NULL;
2421         }
2422         pci_unmap_single(nic->pdev, (dma_addr_t)
2423                          txds->Buffer_Pointer,
2424                          skb->len - skb->data_len,
2425                          PCI_DMA_TODEVICE);
2426         frg_cnt = skb_shinfo(skb)->nr_frags;
2427         if (frg_cnt) {
2428                 txds++;
2429                 for (j = 0; j < frg_cnt; j++, txds++) {
2430                         skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
2431                         if (!txds->Buffer_Pointer)
2432                                 break;
2433                         pci_unmap_page(nic->pdev, (dma_addr_t)
2434                                         txds->Buffer_Pointer,
2435                                        frag->size, PCI_DMA_TODEVICE);
2436                 }
2437         }
2438         memset(txdlp,0, (sizeof(struct TxD) * fifo_data->max_txds));
2439         return(skb);
2440 }
2441
2442 /**
2443  *  free_tx_buffers - Free all queued Tx buffers
2444  *  @nic : device private variable.
2445  *  Description:
2446  *  Free all queued Tx buffers.
2447  *  Return Value: void
2448 */
2449
2450 static void free_tx_buffers(struct s2io_nic *nic)
2451 {
2452         struct net_device *dev = nic->dev;
2453         struct sk_buff *skb;
2454         struct TxD *txdp;
2455         int i, j;
2456         struct mac_info *mac_control;
2457         struct config_param *config;
2458         int cnt = 0;
2459
2460         mac_control = &nic->mac_control;
2461         config = &nic->config;
2462
2463         for (i = 0; i < config->tx_fifo_num; i++) {
2464                 unsigned long flags;
2465                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags);
2466                 for (j = 0; j < config->tx_cfg[i].fifo_len; j++) {
2467                         txdp = (struct TxD *) \
2468                         mac_control->fifos[i].list_info[j].list_virt_addr;
2469                         skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
2470                         if (skb) {
2471                                 nic->mac_control.stats_info->sw_stat.mem_freed
2472                                         += skb->truesize;
2473                                 dev_kfree_skb(skb);
2474                                 cnt++;
2475                         }
2476                 }
2477                 DBG_PRINT(INTR_DBG,
2478                           "%s:forcibly freeing %d skbs on FIFO%d\n",
2479                           dev->name, cnt, i);
2480                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
2481                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
2482                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock, flags);
2483         }
2484 }
2485
2486 /**
2487  *   stop_nic -  To stop the nic
2488  *   @nic ; device private variable.
2489  *   Description:
2490  *   This function does exactly the opposite of what the start_nic()
2491  *   function does. This function is called to stop the device.
2492  *   Return Value:
2493  *   void.
2494  */
2495
2496 static void stop_nic(struct s2io_nic *nic)
2497 {
2498         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2499         register u64 val64 = 0;
2500         u16 interruptible;
2501         struct mac_info *mac_control;
2502         struct config_param *config;
2503
2504         mac_control = &nic->mac_control;
2505         config = &nic->config;
2506
2507         /*  Disable all interrupts */
2508         en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
2509         interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2510         interruptible |= TX_PIC_INTR;
2511         en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2512
2513         /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2514         val64 = readq(&bar0->adapter_control);
2515         val64 &= ~(ADAPTER_CNTL_EN);
2516         writeq(val64, &bar0->adapter_control);
2517 }
2518
2519 /**
2520  *  fill_rx_buffers - Allocates the Rx side skbs
2521  *  @ring_info: per ring structure
2522  *  Description:
2523  *  The function allocates Rx side skbs and puts the physical
2524  *  address of these buffers into the RxD buffer pointers, so that the NIC
2525  *  can DMA the received frame into these locations.
2526  *  The NIC supports 3 receive modes, viz
2527  *  1. single buffer,
2528  *  2. three buffer and
2529  *  3. Five buffer modes.
2530  *  Each mode defines how many fragments the received frame will be split
2531  *  up into by the NIC. The frame is split into L3 header, L4 Header,
2532  *  L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2533  *  is split into 3 fragments. As of now only single buffer mode is
2534  *  supported.
2535  *   Return Value:
2536  *  SUCCESS on success or an appropriate -ve value on failure.
2537  */
2538
2539 static int fill_rx_buffers(struct ring_info *ring)
2540 {
2541         struct sk_buff *skb;
2542         struct RxD_t *rxdp;
2543         int off, size, block_no, block_no1;
2544         u32 alloc_tab = 0;
2545         u32 alloc_cnt;
2546         u64 tmp;
2547         struct buffAdd *ba;
2548         struct RxD_t *first_rxdp = NULL;
2549         u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
2550         int rxd_index = 0;
2551         struct RxD1 *rxdp1;
2552         struct RxD3 *rxdp3;
2553         struct swStat *stats = &ring->nic->mac_control.stats_info->sw_stat;
2554
2555         alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left;
2556
2557         block_no1 = ring->rx_curr_get_info.block_index;
2558         while (alloc_tab < alloc_cnt) {
2559                 block_no = ring->rx_curr_put_info.block_index;
2560
2561                 off = ring->rx_curr_put_info.offset;
2562
2563                 rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr;
2564
2565                 rxd_index = off + 1;
2566                 if (block_no)
2567                         rxd_index += (block_no * ring->rxd_count);
2568
2569                 if ((block_no == block_no1) && 
2570                         (off == ring->rx_curr_get_info.offset) &&
2571                         (rxdp->Host_Control)) {
2572                         DBG_PRINT(INTR_DBG, "%s: Get and Put",
2573                                 ring->dev->name);
2574                         DBG_PRINT(INTR_DBG, " info equated\n");
2575                         goto end;
2576                 }
2577                 if (off && (off == ring->rxd_count)) {
2578                         ring->rx_curr_put_info.block_index++;
2579                         if (ring->rx_curr_put_info.block_index ==
2580                                                         ring->block_count)
2581                                 ring->rx_curr_put_info.block_index = 0;
2582                         block_no = ring->rx_curr_put_info.block_index;
2583                         off = 0;
2584                         ring->rx_curr_put_info.offset = off;
2585                         rxdp = ring->rx_blocks[block_no].block_virt_addr;
2586                         DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2587                                   ring->dev->name, rxdp);
2588
2589                 }
2590
2591                 if ((rxdp->Control_1 & RXD_OWN_XENA) &&
2592                         ((ring->rxd_mode == RXD_MODE_3B) &&
2593                                 (rxdp->Control_2 & s2BIT(0)))) {
2594                         ring->rx_curr_put_info.offset = off;
2595                         goto end;
2596                 }
2597                 /* calculate size of skb based on ring mode */
2598                 size = ring->mtu + HEADER_ETHERNET_II_802_3_SIZE +
2599                                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2600                 if (ring->rxd_mode == RXD_MODE_1)
2601                         size += NET_IP_ALIGN;
2602                 else
2603                         size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4;
2604
2605                 /* allocate skb */
2606                 skb = dev_alloc_skb(size);
2607                 if(!skb) {
2608                         DBG_PRINT(INFO_DBG, "%s: Out of ", ring->dev->name);
2609                         DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
2610                         if (first_rxdp) {
2611                                 wmb();
2612                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2613                         }
2614                         stats->mem_alloc_fail_cnt++;
2615                                 
2616                         return -ENOMEM ;
2617                 }
2618                 stats->mem_allocated += skb->truesize;
2619
2620                 if (ring->rxd_mode == RXD_MODE_1) {
2621                         /* 1 buffer mode - normal operation mode */
2622                         rxdp1 = (struct RxD1*)rxdp;
2623                         memset(rxdp, 0, sizeof(struct RxD1));
2624                         skb_reserve(skb, NET_IP_ALIGN);
2625                         rxdp1->Buffer0_ptr = pci_map_single
2626                             (ring->pdev, skb->data, size - NET_IP_ALIGN,
2627                                 PCI_DMA_FROMDEVICE);
2628                         if(pci_dma_mapping_error(rxdp1->Buffer0_ptr))
2629                                 goto pci_map_failed;
2630
2631                         rxdp->Control_2 =
2632                                 SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
2633                         rxdp->Host_Control = (unsigned long) (skb);
2634                 } else if (ring->rxd_mode == RXD_MODE_3B) {
2635                         /*
2636                          * 2 buffer mode -
2637                          * 2 buffer mode provides 128
2638                          * byte aligned receive buffers.
2639                          */
2640
2641                         rxdp3 = (struct RxD3*)rxdp;
2642                         /* save buffer pointers to avoid frequent dma mapping */
2643                         Buffer0_ptr = rxdp3->Buffer0_ptr;
2644                         Buffer1_ptr = rxdp3->Buffer1_ptr;
2645                         memset(rxdp, 0, sizeof(struct RxD3));
2646                         /* restore the buffer pointers for dma sync*/
2647                         rxdp3->Buffer0_ptr = Buffer0_ptr;
2648                         rxdp3->Buffer1_ptr = Buffer1_ptr;
2649
2650                         ba = &ring->ba[block_no][off];
2651                         skb_reserve(skb, BUF0_LEN);
2652                         tmp = (u64)(unsigned long) skb->data;
2653                         tmp += ALIGN_SIZE;
2654                         tmp &= ~ALIGN_SIZE;
2655                         skb->data = (void *) (unsigned long)tmp;
2656                         skb_reset_tail_pointer(skb);
2657
2658                         /* AK: check is wrong. 0 can be valid dma address */
2659                         if (!(rxdp3->Buffer0_ptr))
2660                                 rxdp3->Buffer0_ptr =
2661                                    pci_map_single(ring->pdev, ba->ba_0,
2662                                         BUF0_LEN, PCI_DMA_FROMDEVICE);
2663                         else
2664                                 pci_dma_sync_single_for_device(ring->pdev,
2665                                 (dma_addr_t) rxdp3->Buffer0_ptr,
2666                                     BUF0_LEN, PCI_DMA_FROMDEVICE);
2667                         if (pci_dma_mapping_error(rxdp3->Buffer0_ptr))
2668                                 goto pci_map_failed;
2669
2670                         rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
2671                         if (ring->rxd_mode == RXD_MODE_3B) {
2672                                 /* Two buffer mode */
2673
2674                                 /*
2675                                  * Buffer2 will have L3/L4 header plus
2676                                  * L4 payload
2677                                  */
2678                                 rxdp3->Buffer2_ptr = pci_map_single
2679                                 (ring->pdev, skb->data, ring->mtu + 4,
2680                                                 PCI_DMA_FROMDEVICE);
2681
2682                                 if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
2683                                         goto pci_map_failed;
2684
2685                                 /* AK: check is wrong */
2686                                 if (!rxdp3->Buffer1_ptr)
2687                                         rxdp3->Buffer1_ptr =
2688                                                 pci_map_single(ring->pdev,
2689                                                 ba->ba_1, BUF1_LEN,
2690                                                 PCI_DMA_FROMDEVICE);
2691
2692                                 if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) {
2693                                         pci_unmap_single
2694                                                 (ring->pdev,
2695                                                 (dma_addr_t)(unsigned long)
2696                                                 skb->data,
2697                                                 ring->mtu + 4,
2698                                                 PCI_DMA_FROMDEVICE);
2699                                         goto pci_map_failed;
2700                                 }
2701                                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
2702                                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3
2703                                                                 (ring->mtu + 4);
2704                         }
2705                         rxdp->Control_2 |= s2BIT(0);
2706                         rxdp->Host_Control = (unsigned long) (skb);
2707                 }
2708                 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2709                         rxdp->Control_1 |= RXD_OWN_XENA;
2710                 off++;
2711                 if (off == (ring->rxd_count + 1))
2712                         off = 0;
2713                 ring->rx_curr_put_info.offset = off;
2714
2715                 rxdp->Control_2 |= SET_RXD_MARKER;
2716                 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2717                         if (first_rxdp) {
2718                                 wmb();
2719                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2720                         }
2721                         first_rxdp = rxdp;
2722                 }
2723                 ring->rx_bufs_left += 1;
2724                 alloc_tab++;
2725         }
2726
2727       end:
2728         /* Transfer ownership of first descriptor to adapter just before
2729          * exiting. Before that, use memory barrier so that ownership
2730          * and other fields are seen by adapter correctly.
2731          */
2732         if (first_rxdp) {
2733                 wmb();
2734                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2735         }
2736
2737         return SUCCESS;
2738 pci_map_failed:
2739         stats->pci_map_fail_cnt++;
2740         stats->mem_freed += skb->truesize;
2741         dev_kfree_skb_irq(skb);
2742         return -ENOMEM;
2743 }
2744
2745 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
2746 {
2747         struct net_device *dev = sp->dev;
2748         int j;
2749         struct sk_buff *skb;
2750         struct RxD_t *rxdp;
2751         struct mac_info *mac_control;
2752         struct buffAdd *ba;
2753         struct RxD1 *rxdp1;
2754         struct RxD3 *rxdp3;
2755
2756         mac_control = &sp->mac_control;
2757         for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
2758                 rxdp = mac_control->rings[ring_no].
2759                                 rx_blocks[blk].rxds[j].virt_addr;
2760                 skb = (struct sk_buff *)
2761                         ((unsigned long) rxdp->Host_Control);
2762                 if (!skb) {
2763                         continue;
2764                 }
2765                 if (sp->rxd_mode == RXD_MODE_1) {
2766                         rxdp1 = (struct RxD1*)rxdp;
2767                         pci_unmap_single(sp->pdev, (dma_addr_t)
2768                                 rxdp1->Buffer0_ptr,
2769                                 dev->mtu +
2770                                 HEADER_ETHERNET_II_802_3_SIZE
2771                                 + HEADER_802_2_SIZE +
2772                                 HEADER_SNAP_SIZE,
2773                                 PCI_DMA_FROMDEVICE);
2774                         memset(rxdp, 0, sizeof(struct RxD1));
2775                 } else if(sp->rxd_mode == RXD_MODE_3B) {
2776                         rxdp3 = (struct RxD3*)rxdp;
2777                         ba = &mac_control->rings[ring_no].
2778                                 ba[blk][j];
2779                         pci_unmap_single(sp->pdev, (dma_addr_t)
2780                                 rxdp3->Buffer0_ptr,
2781                                 BUF0_LEN,
2782                                 PCI_DMA_FROMDEVICE);
2783                         pci_unmap_single(sp->pdev, (dma_addr_t)
2784                                 rxdp3->Buffer1_ptr,
2785                                 BUF1_LEN,
2786                                 PCI_DMA_FROMDEVICE);
2787                         pci_unmap_single(sp->pdev, (dma_addr_t)
2788                                 rxdp3->Buffer2_ptr,
2789                                 dev->mtu + 4,
2790                                 PCI_DMA_FROMDEVICE);
2791                         memset(rxdp, 0, sizeof(struct RxD3));
2792                 }
2793                 sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
2794                 dev_kfree_skb(skb);
2795                 mac_control->rings[ring_no].rx_bufs_left -= 1;
2796         }
2797 }
2798
2799 /**
2800  *  free_rx_buffers - Frees all Rx buffers
2801  *  @sp: device private variable.
2802  *  Description:
2803  *  This function will free all Rx buffers allocated by host.
2804  *  Return Value:
2805  *  NONE.
2806  */
2807
2808 static void free_rx_buffers(struct s2io_nic *sp)
2809 {
2810         struct net_device *dev = sp->dev;
2811         int i, blk = 0, buf_cnt = 0;
2812         struct mac_info *mac_control;
2813         struct config_param *config;
2814
2815         mac_control = &sp->mac_control;
2816         config = &sp->config;
2817
2818         for (i = 0; i < config->rx_ring_num; i++) {
2819                 for (blk = 0; blk < rx_ring_sz[i]; blk++)
2820                         free_rxd_blk(sp,i,blk);
2821
2822                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
2823                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
2824                 mac_control->rings[i].rx_curr_put_info.offset = 0;
2825                 mac_control->rings[i].rx_curr_get_info.offset = 0;
2826                 mac_control->rings[i].rx_bufs_left = 0;
2827                 DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
2828                           dev->name, buf_cnt, i);
2829         }
2830 }
2831
2832 static int s2io_chk_rx_buffers(struct ring_info *ring)
2833 {
2834         if (fill_rx_buffers(ring) == -ENOMEM) {
2835                 DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
2836                 DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
2837         }
2838         return 0;
2839 }
2840
2841 /**
2842  * s2io_poll - Rx interrupt handler for NAPI support
2843  * @napi : pointer to the napi structure.
2844  * @budget : The number of packets that were budgeted to be processed
2845  * during  one pass through the 'Poll" function.
2846  * Description:
2847  * Comes into picture only if NAPI support has been incorporated. It does
2848  * the same thing that rx_intr_handler does, but not in a interrupt context
2849  * also It will process only a given number of packets.
2850  * Return value:
2851  * 0 on success and 1 if there are No Rx packets to be processed.
2852  */
2853
2854 static int s2io_poll_msix(struct napi_struct *napi, int budget)
2855 {
2856         struct ring_info *ring = container_of(napi, struct ring_info, napi);
2857         struct net_device *dev = ring->dev;
2858         struct config_param *config;
2859         struct mac_info *mac_control;
2860         int pkts_processed = 0;
2861         u8 __iomem *addr = NULL;
2862         u8 val8 = 0;
2863         struct s2io_nic *nic = dev->priv;
2864         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2865         int budget_org = budget;
2866
2867         config = &nic->config;
2868         mac_control = &nic->mac_control;
2869
2870         if (unlikely(!is_s2io_card_up(nic)))
2871                 return 0;
2872
2873         pkts_processed = rx_intr_handler(ring, budget);
2874         s2io_chk_rx_buffers(ring);
2875
2876         if (pkts_processed < budget_org) {
2877                 netif_rx_complete(dev, napi);
2878                 /*Re Enable MSI-Rx Vector*/
2879                 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
2880                 addr += 7 - ring->ring_no;
2881                 val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
2882                 writeb(val8, addr);
2883                 val8 = readb(addr);
2884         }
2885         return pkts_processed;
2886 }
2887 static int s2io_poll_inta(struct napi_struct *napi, int budget)
2888 {
2889         struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
2890         struct ring_info *ring;
2891         struct net_device *dev = nic->dev;
2892         struct config_param *config;
2893         struct mac_info *mac_control;
2894         int pkts_processed = 0;
2895         int ring_pkts_processed, i;
2896         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2897         int budget_org = budget;
2898
2899         config = &nic->config;
2900         mac_control = &nic->mac_control;
2901
2902         if (unlikely(!is_s2io_card_up(nic)))
2903                 return 0;
2904
2905         for (i = 0; i < config->rx_ring_num; i++) {
2906                 ring = &mac_control->rings[i];
2907                 ring_pkts_processed = rx_intr_handler(ring, budget);
2908                 s2io_chk_rx_buffers(ring);
2909                 pkts_processed += ring_pkts_processed;
2910                 budget -= ring_pkts_processed;
2911                 if (budget <= 0)
2912                         break;
2913         }
2914         if (pkts_processed < budget_org) {
2915                 netif_rx_complete(dev, napi);
2916                 /* Re enable the Rx interrupts for the ring */
2917                 writeq(0, &bar0->rx_traffic_mask);
2918                 readl(&bar0->rx_traffic_mask);
2919         }
2920         return pkts_processed;
2921 }
2922
2923 #ifdef CONFIG_NET_POLL_CONTROLLER
2924 /**
2925  * s2io_netpoll - netpoll event handler entry point
2926  * @dev : pointer to the device structure.
2927  * Description:
2928  *      This function will be called by upper layer to check for events on the
2929  * interface in situations where interrupts are disabled. It is used for
2930  * specific in-kernel networking tasks, such as remote consoles and kernel
2931  * debugging over the network (example netdump in RedHat).
2932  */
2933 static void s2io_netpoll(struct net_device *dev)
2934 {
2935         struct s2io_nic *nic = dev->priv;
2936         struct mac_info *mac_control;
2937         struct config_param *config;
2938         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2939         u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
2940         int i;
2941
2942         if (pci_channel_offline(nic->pdev))
2943                 return;
2944
2945         disable_irq(dev->irq);
2946
2947         mac_control = &nic->mac_control;
2948         config = &nic->config;
2949
2950         writeq(val64, &bar0->rx_traffic_int);
2951         writeq(val64, &bar0->tx_traffic_int);
2952
2953         /* we need to free up the transmitted skbufs or else netpoll will
2954          * run out of skbs and will fail and eventually netpoll application such
2955          * as netdump will fail.
2956          */
2957         for (i = 0; i < config->tx_fifo_num; i++)
2958                 tx_intr_handler(&mac_control->fifos[i]);
2959
2960         /* check for received packet and indicate up to network */
2961         for (i = 0; i < config->rx_ring_num; i++)
2962                 rx_intr_handler(&mac_control->rings[i], 0);
2963
2964         for (i = 0; i < config->rx_ring_num; i++) {
2965                 if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
2966                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2967                         DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
2968                         break;
2969                 }
2970         }
2971         enable_irq(dev->irq);
2972         return;
2973 }
2974 #endif
2975
2976 /**
2977  *  rx_intr_handler - Rx interrupt handler
2978  *  @ring_info: per ring structure.
2979  *  @budget: budget for napi processing.
2980  *  Description:
2981  *  If the interrupt is because of a received frame or if the
2982  *  receive ring contains fresh as yet un-processed frames,this function is
2983  *  called. It picks out the RxD at which place the last Rx processing had
2984  *  stopped and sends the skb to the OSM's Rx handler and then increments
2985  *  the offset.
2986  *  Return Value:
2987  *  No. of napi packets processed.
2988  */
2989 static int rx_intr_handler(struct ring_info *ring_data, int budget)
2990 {
2991         int get_block, put_block;
2992         struct rx_curr_get_info get_info, put_info;
2993         struct RxD_t *rxdp;
2994         struct sk_buff *skb;
2995         int pkt_cnt = 0, napi_pkts = 0;
2996         int i;
2997         struct RxD1* rxdp1;
2998         struct RxD3* rxdp3;
2999
3000         get_info = ring_data->rx_curr_get_info;
3001         get_block = get_info.block_index;
3002         memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
3003         put_block = put_info.block_index;
3004         rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
3005
3006         while (RXD_IS_UP2DT(rxdp)) {
3007                 /*
3008                  * If your are next to put index then it's
3009                  * FIFO full condition
3010                  */
3011                 if ((get_block == put_block) &&
3012                     (get_info.offset + 1) == put_info.offset) {
3013                         DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
3014                                 ring_data->dev->name);
3015                         break;
3016                 }
3017                 skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
3018                 if (skb == NULL) {
3019                         DBG_PRINT(ERR_DBG, "%s: The skb is ",
3020                                   ring_data->dev->name);
3021                         DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
3022                         return 0;
3023                 }
3024                 if (ring_data->rxd_mode == RXD_MODE_1) {
3025                         rxdp1 = (struct RxD1*)rxdp;
3026                         pci_unmap_single(ring_data->pdev, (dma_addr_t)
3027                                 rxdp1->Buffer0_ptr,
3028                                 ring_data->mtu +
3029                                 HEADER_ETHERNET_II_802_3_SIZE +
3030                                 HEADER_802_2_SIZE +
3031                                 HEADER_SNAP_SIZE,
3032                                 PCI_DMA_FROMDEVICE);
3033                 } else if (ring_data->rxd_mode == RXD_MODE_3B) {
3034                         rxdp3 = (struct RxD3*)rxdp;
3035                         pci_dma_sync_single_for_cpu(ring_data->pdev, (dma_addr_t)
3036                                 rxdp3->Buffer0_ptr,
3037                                 BUF0_LEN, PCI_DMA_FROMDEVICE);
3038                         pci_unmap_single(ring_data->pdev, (dma_addr_t)
3039                                 rxdp3->Buffer2_ptr,
3040                                 ring_data->mtu + 4,
3041                                 PCI_DMA_FROMDEVICE);
3042                 }
3043                 prefetch(skb->data);
3044                 rx_osm_handler(ring_data, rxdp);
3045                 get_info.offset++;
3046                 ring_data->rx_curr_get_info.offset = get_info.offset;
3047                 rxdp = ring_data->rx_blocks[get_block].
3048                                 rxds[get_info.offset].virt_addr;
3049                 if (get_info.offset == rxd_count[ring_data->rxd_mode]) {
3050                         get_info.offset = 0;
3051                         ring_data->rx_curr_get_info.offset = get_info.offset;
3052                         get_block++;
3053                         if (get_block == ring_data->block_count)
3054                                 get_block = 0;
3055                         ring_data->rx_curr_get_info.block_index = get_block;
3056                         rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
3057                 }
3058
3059                 if (ring_data->nic->config.napi) {
3060                         budget--;
3061                         napi_pkts++;
3062                         if (!budget)
3063                                 break;
3064                 }
3065                 pkt_cnt++;
3066                 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
3067                         break;
3068         }
3069         if (ring_data->lro) {
3070                 /* Clear all LRO sessions before exiting */
3071                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
3072                         struct lro *lro = &ring_data->lro0_n[i];
3073                         if (lro->in_use) {
3074                                 update_L3L4_header(ring_data->nic, lro);
3075                                 queue_rx_frame(lro->parent, lro->vlan_tag);
3076                                 clear_lro_session(lro);
3077                         }
3078                 }
3079         }
3080         return(napi_pkts);
3081 }
3082
3083 /**
3084  *  tx_intr_handler - Transmit interrupt handler
3085  *  @nic : device private variable
3086  *  Description:
3087  *  If an interrupt was raised to indicate DMA complete of the
3088  *  Tx packet, this function is called. It identifies the last TxD
3089  *  whose buffer was freed and frees all skbs whose data have already
3090  *  DMA'ed into the NICs internal memory.
3091  *  Return Value:
3092  *  NONE
3093  */
3094
3095 static void tx_intr_handler(struct fifo_info *fifo_data)
3096 {
3097         struct s2io_nic *nic = fifo_data->nic;
3098         struct tx_curr_get_info get_info, put_info;
3099         struct sk_buff *skb = NULL;
3100         struct TxD *txdlp;
3101         int pkt_cnt = 0;
3102         unsigned long flags = 0;
3103         u8 err_mask;
3104
3105         if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
3106                         return;
3107
3108         get_info = fifo_data->tx_curr_get_info;
3109         memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
3110         txdlp = (struct TxD *) fifo_data->list_info[get_info.offset].
3111             list_virt_addr;
3112         while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
3113                (get_info.offset != put_info.offset) &&
3114                (txdlp->Host_Control)) {
3115                 /* Check for TxD errors */
3116                 if (txdlp->Control_1 & TXD_T_CODE) {
3117                         unsigned long long err;
3118                         err = txdlp->Control_1 & TXD_T_CODE;
3119                         if (err & 0x1) {
3120                                 nic->mac_control.stats_info->sw_stat.
3121                                                 parity_err_cnt++;
3122                         }
3123
3124                         /* update t_code statistics */
3125                         err_mask = err >> 48;
3126                         switch(err_mask) {
3127                                 case 2:
3128                                         nic->mac_control.stats_info->sw_stat.
3129                                                         tx_buf_abort_cnt++;
3130                                 break;
3131
3132                                 case 3:
3133                                         nic->mac_control.stats_info->sw_stat.
3134                                                         tx_desc_abort_cnt++;
3135                                 break;
3136
3137                                 case 7:
3138                                         nic->mac_control.stats_info->sw_stat.
3139                                                         tx_parity_err_cnt++;
3140                                 break;
3141
3142                                 case 10:
3143                                         nic->mac_control.stats_info->sw_stat.
3144                                                         tx_link_loss_cnt++;
3145                                 break;
3146
3147                                 case 15:
3148                                         nic->mac_control.stats_info->sw_stat.
3149                                                         tx_list_proc_err_cnt++;
3150                                 break;
3151                         }
3152                 }
3153
3154                 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
3155                 if (skb == NULL) {
3156                         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3157                         DBG_PRINT(ERR_DBG, "%s: Null skb ",
3158                         __FUNCTION__);
3159                         DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
3160                         return;
3161                 }
3162                 pkt_cnt++;
3163
3164                 /* Updating the statistics block */
3165                 nic->stats.tx_bytes += skb->len;
3166                 nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
3167                 dev_kfree_skb_irq(skb);
3168
3169                 get_info.offset++;
3170                 if (get_info.offset == get_info.fifo_len + 1)
3171                         get_info.offset = 0;
3172                 txdlp = (struct TxD *) fifo_data->list_info
3173                     [get_info.offset].list_virt_addr;
3174                 fifo_data->tx_curr_get_info.offset =
3175                     get_info.offset;
3176         }
3177
3178         s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
3179
3180         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3181 }
3182
3183 /**
3184  *  s2io_mdio_write - Function to write in to MDIO registers
3185  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3186  *  @addr     : address value
3187  *  @value    : data value
3188  *  @dev      : pointer to net_device structure
3189  *  Description:
3190  *  This function is used to write values to the MDIO registers
3191  *  NONE
3192  */
3193 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device *dev)
3194 {
3195         u64 val64 = 0x0;
3196         struct s2io_nic *sp = dev->priv;
3197         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3198
3199         //address transaction
3200         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3201                         | MDIO_MMD_DEV_ADDR(mmd_type)
3202                         | MDIO_MMS_PRT_ADDR(0x0);
3203         writeq(val64, &bar0->mdio_control);
3204         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3205         writeq(val64, &bar0->mdio_control);
3206         udelay(100);
3207
3208         //Data transaction
3209         val64 = 0x0;
3210         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3211                         | MDIO_MMD_DEV_ADDR(mmd_type)
3212                         | MDIO_MMS_PRT_ADDR(0x0)
3213                         | MDIO_MDIO_DATA(value)
3214                         | MDIO_OP(MDIO_OP_WRITE_TRANS);
3215         writeq(val64, &bar0->mdio_control);
3216         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3217         writeq(val64, &bar0->mdio_control);
3218         udelay(100);
3219
3220         val64 = 0x0;
3221         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3222         | MDIO_MMD_DEV_ADDR(mmd_type)
3223         | MDIO_MMS_PRT_ADDR(0x0)
3224         | MDIO_OP(MDIO_OP_READ_TRANS);
3225         writeq(val64, &bar0->mdio_control);
3226         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3227         writeq(val64, &bar0->mdio_control);
3228         udelay(100);
3229
3230 }
3231
3232 /**
3233  *  s2io_mdio_read - Function to write in to MDIO registers
3234  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3235  *  @addr     : address value
3236  *  @dev      : pointer to net_device structure
3237  *  Description:
3238  *  This function is used to read values to the MDIO registers
3239  *  NONE
3240  */
3241 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
3242 {
3243         u64 val64 = 0x0;
3244         u64 rval64 = 0x0;
3245         struct s2io_nic *sp = dev->priv;
3246         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3247
3248         /* address transaction */
3249         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3250                         | MDIO_MMD_DEV_ADDR(mmd_type)
3251                         | MDIO_MMS_PRT_ADDR(0x0);
3252         writeq(val64, &bar0->mdio_control);
3253         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3254         writeq(val64, &bar0->mdio_control);
3255         udelay(100);
3256
3257         /* Data transaction */
3258         val64 = 0x0;
3259         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3260                         | MDIO_MMD_DEV_ADDR(mmd_type)
3261                         | MDIO_MMS_PRT_ADDR(0x0)
3262                         | MDIO_OP(MDIO_OP_READ_TRANS);
3263         writeq(val64, &bar0->mdio_control);
3264         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3265         writeq(val64, &bar0->mdio_control);
3266         udelay(100);
3267
3268         /* Read the value from regs */
3269         rval64 = readq(&bar0->mdio_control);
3270         rval64 = rval64 & 0xFFFF0000;
3271         rval64 = rval64 >> 16;
3272         return rval64;
3273 }
3274 /**
3275  *  s2io_chk_xpak_counter - Function to check the status of the xpak counters
3276  *  @counter      : couter value to be updated
3277  *  @flag         : flag to indicate the status
3278  *  @type         : counter type
3279  *  Description:
3280  *  This function is to check the status of the xpak counters value
3281  *  NONE
3282  */
3283
3284 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, u16 flag, u16 type)
3285 {
3286         u64 mask = 0x3;
3287         u64 val64;
3288         int i;
3289         for(i = 0; i <index; i++)
3290                 mask = mask << 0x2;
3291
3292         if(flag > 0)
3293         {
3294                 *counter = *counter + 1;
3295                 val64 = *regs_stat & mask;
3296                 val64 = val64 >> (index * 0x2);
3297                 val64 = val64 + 1;
3298                 if(val64 == 3)
3299                 {
3300                         switch(type)
3301                         {
3302                         case 1:
3303                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3304                                           "service. Excessive temperatures may "
3305                                           "result in premature transceiver "
3306                                           "failure \n");
3307                         break;
3308                         case 2:
3309                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3310                                           "service Excessive bias currents may "
3311                                           "indicate imminent laser diode "
3312                                           "failure \n");
3313                         break;
3314                         case 3:
3315                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3316                                           "service Excessive laser output "
3317                                           "power may saturate far-end "
3318                                           "receiver\n");
3319                         break;
3320                         default:
3321                                 DBG_PRINT(ERR_DBG, "Incorrect XPAK Alarm "
3322                                           "type \n");
3323                         }
3324                         val64 = 0x0;
3325                 }
3326                 val64 = val64 << (index * 0x2);
3327                 *regs_stat = (*regs_stat & (~mask)) | (val64);
3328
3329         } else {
3330                 *regs_stat = *regs_stat & (~mask);
3331         }
3332 }
3333
3334 /**
3335  *  s2io_updt_xpak_counter - Function to update the xpak counters
3336  *  @dev         : pointer to net_device struct
3337  *  Description:
3338  *  This function is to upate the status of the xpak counters value
3339  *  NONE
3340  */
3341 static void s2io_updt_xpak_counter(struct net_device *dev)
3342 {
3343         u16 flag  = 0x0;
3344         u16 type  = 0x0;
3345         u16 val16 = 0x0;
3346         u64 val64 = 0x0;
3347         u64 addr  = 0x0;
3348
3349         struct s2io_nic *sp = dev->priv;
3350         struct stat_block *stat_info = sp->mac_control.stats_info;
3351
3352         /* Check the communication with the MDIO slave */
3353         addr = 0x0000;
3354         val64 = 0x0;
3355         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3356         if((val64 == 0xFFFF) || (val64 == 0x0000))
3357         {
3358                 DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
3359                           "Returned %llx\n", (unsigned long long)val64);
3360                 return;
3361         }
3362
3363         /* Check for the expecte value of 2040 at PMA address 0x0000 */
3364         if(val64 != 0x2040)
3365         {
3366                 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
3367                 DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
3368                           (unsigned long long)val64);
3369                 return;
3370         }
3371
3372         /* Loading the DOM register to MDIO register */
3373         addr = 0xA100;
3374         s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
3375         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3376
3377         /* Reading the Alarm flags */
3378         addr = 0xA070;
3379         val64 = 0x0;
3380         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3381
3382         flag = CHECKBIT(val64, 0x7);
3383         type = 1;
3384         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_transceiver_temp_high,
3385                                 &stat_info->xpak_stat.xpak_regs_stat,
3386                                 0x0, flag, type);
3387
3388         if(CHECKBIT(val64, 0x6))
3389                 stat_info->xpak_stat.alarm_transceiver_temp_low++;
3390
3391         flag = CHECKBIT(val64, 0x3);
3392         type = 2;
3393         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_bias_current_high,
3394                                 &stat_info->xpak_stat.xpak_regs_stat,
3395                                 0x2, flag, type);
3396
3397         if(CHECKBIT(val64, 0x2))
3398                 stat_info->xpak_stat.alarm_laser_bias_current_low++;
3399
3400         flag = CHECKBIT(val64, 0x1);
3401         type = 3;
3402         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_output_power_high,
3403                                 &stat_info->xpak_stat.xpak_regs_stat,
3404                                 0x4, flag, type);
3405
3406         if(CHECKBIT(val64, 0x0))
3407                 stat_info->xpak_stat.alarm_laser_output_power_low++;
3408
3409         /* Reading the Warning flags */
3410         addr = 0xA074;
3411         val64 = 0x0;
3412         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3413
3414         if(CHECKBIT(val64, 0x7))
3415                 stat_info->xpak_stat.warn_transceiver_temp_high++;
3416
3417         if(CHECKBIT(val64, 0x6))
3418                 stat_info->xpak_stat.warn_transceiver_temp_low++;
3419
3420         if(CHECKBIT(val64, 0x3))
3421                 stat_info->xpak_stat.warn_laser_bias_current_high++;
3422
3423         if(CHECKBIT(val64, 0x2))
3424                 stat_info->xpak_stat.warn_laser_bias_current_low++;
3425
3426         if(CHECKBIT(val64, 0x1))
3427                 stat_info->xpak_stat.warn_laser_output_power_high++;
3428
3429         if(CHECKBIT(val64, 0x0))
3430                 stat_info->xpak_stat.warn_laser_output_power_low++;
3431 }
3432
3433 /**
3434  *  wait_for_cmd_complete - waits for a command to complete.
3435  *  @sp : private member of the device structure, which is a pointer to the
3436  *  s2io_nic structure.
3437  *  Description: Function that waits for a command to Write into RMAC
3438  *  ADDR DATA registers to be completed and returns either success or
3439  *  error depending on whether the command was complete or not.
3440  *  Return value:
3441  *   SUCCESS on success and FAILURE on failure.
3442  */
3443
3444 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
3445                                 int bit_state)
3446 {
3447         int ret = FAILURE, cnt = 0, delay = 1;
3448         u64 val64;
3449
3450         if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
3451                 return FAILURE;
3452
3453         do {
3454                 val64 = readq(addr);
3455                 if (bit_state == S2IO_BIT_RESET) {
3456                         if (!(val64 & busy_bit)) {
3457                                 ret = SUCCESS;
3458                                 break;
3459                         }
3460                 } else {
3461                         if (!(val64 & busy_bit)) {
3462                                 ret = SUCCESS;
3463                                 break;
3464                         }
3465                 }
3466
3467                 if(in_interrupt())
3468                         mdelay(delay);
3469                 else
3470                         msleep(delay);
3471
3472                 if (++cnt >= 10)
3473                         delay = 50;
3474         } while (cnt < 20);
3475         return ret;
3476 }
3477 /*
3478  * check_pci_device_id - Checks if the device id is supported
3479  * @id : device id
3480  * Description: Function to check if the pci device id is supported by driver.
3481  * Return value: Actual device id if supported else PCI_ANY_ID
3482  */
3483 static u16 check_pci_device_id(u16 id)
3484 {
3485         switch (id) {
3486         case PCI_DEVICE_ID_HERC_WIN:
3487         case PCI_DEVICE_ID_HERC_UNI:
3488                 return XFRAME_II_DEVICE;
3489         case PCI_DEVICE_ID_S2IO_UNI:
3490         case PCI_DEVICE_ID_S2IO_WIN:
3491                 return XFRAME_I_DEVICE;
3492         default:
3493                 return PCI_ANY_ID;
3494         }
3495 }
3496
3497 /**
3498  *  s2io_reset - Resets the card.
3499  *  @sp : private member of the device structure.
3500  *  Description: Function to Reset the card. This function then also
3501  *  restores the previously saved PCI configuration space registers as
3502  *  the card reset also resets the configuration space.
3503  *  Return value:
3504  *  void.
3505  */
3506
3507 static void s2io_reset(struct s2io_nic * sp)
3508 {
3509         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3510         u64 val64;
3511         u16 subid, pci_cmd;
3512         int i;
3513         u16 val16;
3514         unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
3515         unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
3516
3517         DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
3518                         __FUNCTION__, sp->dev->name);
3519
3520         /* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3521         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
3522
3523         val64 = SW_RESET_ALL;
3524         writeq(val64, &bar0->sw_reset);
3525         if (strstr(sp->product_name, "CX4")) {
3526                 msleep(750);
3527         }
3528         msleep(250);
3529         for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
3530
3531                 /* Restore the PCI state saved during initialization. */
3532                 pci_restore_state(sp->pdev);
3533                 pci_read_config_word(sp->pdev, 0x2, &val16);
3534                 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
3535                         break;
3536                 msleep(200);
3537         }
3538
3539         if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) {
3540                 DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __FUNCTION__);
3541         }
3542
3543         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
3544
3545         s2io_init_pci(sp);
3546
3547         /* Set swapper to enable I/O register access */
3548         s2io_set_swapper(sp);
3549
3550         /* restore mac_addr entries */
3551         do_s2io_restore_unicast_mc(sp);
3552
3553         /* Restore the MSIX table entries from local variables */
3554         restore_xmsi_data(sp);
3555
3556         /* Clear certain PCI/PCI-X fields after reset */
3557         if (sp->device_type == XFRAME_II_DEVICE) {
3558                 /* Clear "detected parity error" bit */
3559                 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
3560
3561                 /* Clearing PCIX Ecc status register */
3562                 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
3563
3564                 /* Clearing PCI_STATUS error reflected here */
3565                 writeq(s2BIT(62), &bar0->txpic_int_reg);
3566         }
3567
3568         /* Reset device statistics maintained by OS */
3569         memset(&sp->stats, 0, sizeof (struct net_device_stats));
3570
3571         up_cnt = sp->mac_control.stats_info->sw_stat.link_up_cnt;
3572         down_cnt = sp->mac_control.stats_info->sw_stat.link_down_cnt;
3573         up_time = sp->mac_control.stats_info->sw_stat.link_up_time;
3574         down_time = sp->mac_control.stats_info->sw_stat.link_down_time;
3575         reset_cnt = sp->mac_control.stats_info->sw_stat.soft_reset_cnt;
3576         mem_alloc_cnt = sp->mac_control.stats_info->sw_stat.mem_allocated;
3577         mem_free_cnt = sp->mac_control.stats_info->sw_stat.mem_freed;
3578         watchdog_cnt = sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt;
3579         /* save link up/down time/cnt, reset/memory/watchdog cnt */
3580         memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
3581         /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3582         sp->mac_control.stats_info->sw_stat.link_up_cnt = up_cnt;
3583         sp->mac_control.stats_info->sw_stat.link_down_cnt = down_cnt;
3584         sp->mac_control.stats_info->sw_stat.link_up_time = up_time;
3585         sp->mac_control.stats_info->sw_stat.link_down_time = down_time;
3586         sp->mac_control.stats_info->sw_stat.soft_reset_cnt = reset_cnt;
3587         sp->mac_control.stats_info->sw_stat.mem_allocated = mem_alloc_cnt;
3588         sp->mac_control.stats_info->sw_stat.mem_freed = mem_free_cnt;
3589         sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt = watchdog_cnt;
3590
3591         /* SXE-002: Configure link and activity LED to turn it off */
3592         subid = sp->pdev->subsystem_device;
3593         if (((subid & 0xFF) >= 0x07) &&
3594             (sp->device_type == XFRAME_I_DEVICE)) {
3595                 val64 = readq(&bar0->gpio_control);
3596                 val64 |= 0x0000800000000000ULL;
3597                 writeq(val64, &bar0->gpio_control);
3598                 val64 = 0x0411040400000000ULL;
3599                 writeq(val64, (void __iomem *)bar0 + 0x2700);
3600         }
3601
3602         /*
3603          * Clear spurious ECC interrupts that would have occured on
3604          * XFRAME II cards after reset.
3605          */
3606         if (sp->device_type == XFRAME_II_DEVICE) {
3607                 val64 = readq(&bar0->pcc_err_reg);
3608                 writeq(val64, &bar0->pcc_err_reg);
3609         }
3610
3611         sp->device_enabled_once = FALSE;
3612 }
3613
3614 /**
3615  *  s2io_set_swapper - to set the swapper controle on the card
3616  *  @sp : private member of the device structure,
3617  *  pointer to the s2io_nic structure.
3618  *  Description: Function to set the swapper control on the card
3619  *  correctly depending on the 'endianness' of the system.
3620  *  Return value:
3621  *  SUCCESS on success and FAILURE on failure.
3622  */
3623
3624 static int s2io_set_swapper(struct s2io_nic * sp)
3625 {
3626         struct net_device *dev = sp->dev;
3627         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3628         u64 val64, valt, valr;
3629
3630         /*
3631          * Set proper endian settings and verify the same by reading
3632          * the PIF Feed-back register.
3633          */
3634
3635         val64 = readq(&bar0->pif_rd_swapper_fb);
3636         if (val64 != 0x0123456789ABCDEFULL) {
3637                 int i = 0;
3638                 u64 value[] = { 0xC30000C3C30000C3ULL,   /* FE=1, SE=1 */
3639                                 0x8100008181000081ULL,  /* FE=1, SE=0 */
3640                                 0x4200004242000042ULL,  /* FE=0, SE=1 */
3641                                 0};                     /* FE=0, SE=0 */
3642
3643                 while(i<4) {
3644                         writeq(value[i], &bar0->swapper_ctrl);
3645                         val64 = readq(&bar0->pif_rd_swapper_fb);
3646                         if (val64 == 0x0123456789ABCDEFULL)
3647                                 break;
3648                         i++;
3649                 }
3650                 if (i == 4) {
3651                         DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3652                                 dev->name);
3653                         DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3654                                 (unsigned long long) val64);
3655                         return FAILURE;
3656                 }
3657                 valr = value[i];
3658         } else {
3659                 valr = readq(&bar0->swapper_ctrl);
3660         }
3661
3662         valt = 0x0123456789ABCDEFULL;
3663         writeq(valt, &bar0->xmsi_address);
3664         val64 = readq(&bar0->xmsi_address);
3665
3666         if(val64 != valt) {
3667                 int i = 0;
3668                 u64 value[] = { 0x00C3C30000C3C300ULL,  /* FE=1, SE=1 */
3669                                 0x0081810000818100ULL,  /* FE=1, SE=0 */
3670                                 0x0042420000424200ULL,  /* FE=0, SE=1 */
3671                                 0};                     /* FE=0, SE=0 */
3672
3673                 while(i<4) {
3674                         writeq((value[i] | valr), &bar0->swapper_ctrl);
3675                         writeq(valt, &bar0->xmsi_address);
3676                         val64 = readq(&bar0->xmsi_address);
3677                         if(val64 == valt)
3678                                 break;
3679                         i++;
3680                 }
3681                 if(i == 4) {
3682                         unsigned long long x = val64;
3683                         DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
3684                         DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
3685                         return FAILURE;
3686                 }
3687         }
3688         val64 = readq(&bar0->swapper_ctrl);
3689         val64 &= 0xFFFF000000000000ULL;
3690
3691 #ifdef  __BIG_ENDIAN
3692         /*
3693          * The device by default set to a big endian format, so a
3694          * big endian driver need not set anything.
3695          */
3696         val64 |= (SWAPPER_CTRL_TXP_FE |
3697                  SWAPPER_CTRL_TXP_SE |
3698                  SWAPPER_CTRL_TXD_R_FE |
3699                  SWAPPER_CTRL_TXD_W_FE |
3700                  SWAPPER_CTRL_TXF_R_FE |
3701                  SWAPPER_CTRL_RXD_R_FE |
3702                  SWAPPER_CTRL_RXD_W_FE |
3703                  SWAPPER_CTRL_RXF_W_FE |
3704                  SWAPPER_CTRL_XMSI_FE |
3705                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3706         if (sp->config.intr_type == INTA)
3707                 val64 |= SWAPPER_CTRL_XMSI_SE;
3708         writeq(val64, &bar0->swapper_ctrl);
3709 #else
3710         /*
3711          * Initially we enable all bits to make it accessible by the
3712          * driver, then we selectively enable only those bits that
3713          * we want to set.
3714          */
3715         val64 |= (SWAPPER_CTRL_TXP_FE |
3716                  SWAPPER_CTRL_TXP_SE |
3717                  SWAPPER_CTRL_TXD_R_FE |
3718                  SWAPPER_CTRL_TXD_R_SE |
3719                  SWAPPER_CTRL_TXD_W_FE |
3720                  SWAPPER_CTRL_TXD_W_SE |
3721                  SWAPPER_CTRL_TXF_R_FE |
3722                  SWAPPER_CTRL_RXD_R_FE |
3723                  SWAPPER_CTRL_RXD_R_SE |
3724                  SWAPPER_CTRL_RXD_W_FE |
3725                  SWAPPER_CTRL_RXD_W_SE |
3726                  SWAPPER_CTRL_RXF_W_FE |
3727                  SWAPPER_CTRL_XMSI_FE |
3728                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3729         if (sp->config.intr_type == INTA)
3730                 val64 |= SWAPPER_CTRL_XMSI_SE;
3731         writeq(val64, &bar0->swapper_ctrl);
3732 #endif
3733         val64 = readq(&bar0->swapper_ctrl);
3734
3735         /*
3736          * Verifying if endian settings are accurate by reading a
3737          * feedback register.
3738          */
3739         val64 = readq(&bar0->pif_rd_swapper_fb);
3740         if (val64 != 0x0123456789ABCDEFULL) {
3741                 /* Endian settings are incorrect, calls for another dekko. */
3742                 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3743                           dev->name);
3744                 DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3745                           (unsigned long long) val64);
3746                 return FAILURE;
3747         }
3748
3749         return SUCCESS;
3750 }
3751
3752 static int wait_for_msix_trans(struct s2io_nic *nic, int i)
3753 {
3754         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3755         u64 val64;
3756         int ret = 0, cnt = 0;
3757
3758         do {
3759                 val64 = readq(&bar0->xmsi_access);
3760                 if (!(val64 & s2BIT(15)))
3761                         break;
3762                 mdelay(1);
3763                 cnt++;
3764         } while(cnt < 5);
3765         if (cnt == 5) {
3766                 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3767                 ret = 1;
3768         }
3769
3770         return ret;
3771 }
3772
3773 static void restore_xmsi_data(struct s2io_nic *nic)
3774 {
3775         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3776         u64 val64;
3777         int i, msix_index;
3778
3779
3780         if (nic->device_type == XFRAME_I_DEVICE)
3781                 return;
3782
3783         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3784                 msix_index = (i) ? ((i-1) * 8 + 1): 0;
3785                 writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
3786                 writeq(nic->msix_info[i].data, &bar0->xmsi_data);
3787                 val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
3788                 writeq(val64, &bar0->xmsi_access);
3789                 if (wait_for_msix_trans(nic, msix_index)) {
3790                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3791                         continue;
3792                 }
3793         }
3794 }
3795
3796 static void store_xmsi_data(struct s2io_nic *nic)
3797 {
3798         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3799         u64 val64, addr, data;
3800         int i, msix_index;
3801
3802         if (nic->device_type == XFRAME_I_DEVICE)
3803                 return;
3804
3805         /* Store and display */
3806         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3807                 msix_index = (i) ? ((i-1) * 8 + 1): 0;
3808                 val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
3809                 writeq(val64, &bar0->xmsi_access);
3810                 if (wait_for_msix_trans(nic, msix_index)) {
3811                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3812                         continue;
3813                 }
3814                 addr = readq(&bar0->xmsi_address);
3815                 data = readq(&bar0->xmsi_data);
3816                 if (addr && data) {
3817                         nic->msix_info[i].addr = addr;
3818                         nic->msix_info[i].data = data;
3819                 }
3820         }
3821 }
3822
3823 static int s2io_enable_msi_x(struct s2io_nic *nic)
3824 {
3825         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3826         u64 rx_mat;
3827         u16 msi_control; /* Temp variable */
3828         int ret, i, j, msix_indx = 1;
3829
3830         nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
3831                                GFP_KERNEL);
3832         if (!nic->entries) {
3833                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
3834                         __FUNCTION__);
3835                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3836                 return -ENOMEM;
3837         }
3838         nic->mac_control.stats_info->sw_stat.mem_allocated
3839                 += (nic->num_entries * sizeof(struct msix_entry));
3840
3841         memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
3842
3843         nic->s2io_entries =
3844                 kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
3845                                    GFP_KERNEL);
3846         if (!nic->s2io_entries) {
3847                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3848                         __FUNCTION__);
3849                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3850                 kfree(nic->entries);
3851                 nic->mac_control.stats_info->sw_stat.mem_freed
3852                         += (nic->num_entries * sizeof(struct msix_entry));
3853                 return -ENOMEM;
3854         }
3855          nic->mac_control.stats_info->sw_stat.mem_allocated
3856                 += (nic->num_entries * sizeof(struct s2io_msix_entry));
3857         memset(nic->s2io_entries, 0,
3858                 nic->num_entries * sizeof(struct s2io_msix_entry));
3859
3860         nic->entries[0].entry = 0;
3861         nic->s2io_entries[0].entry = 0;
3862         nic->s2io_entries[0].in_use = MSIX_FLG;
3863         nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
3864         nic->s2io_entries[0].arg = &nic->mac_control.fifos;
3865
3866         for (i = 1; i < nic->num_entries; i++) {
3867                 nic->entries[i].entry = ((i - 1) * 8) + 1;
3868                 nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
3869                 nic->s2io_entries[i].arg = NULL;
3870                 nic->s2io_entries[i].in_use = 0;
3871         }
3872
3873         rx_mat = readq(&bar0->rx_mat);
3874         for (j = 0; j < nic->config.rx_ring_num; j++) {
3875                 rx_mat |= RX_MAT_SET(j, msix_indx);
3876                 nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
3877                 nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
3878                 nic->s2io_entries[j+1].in_use = MSIX_FLG;
3879                 msix_indx += 8;
3880         }
3881         writeq(rx_mat, &bar0->rx_mat);
3882         readq(&bar0->rx_mat);
3883
3884         ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
3885         /* We fail init if error or we get less vectors than min required */
3886         if (ret) {
3887                 DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
3888                 kfree(nic->entries);
3889                 nic->mac_control.stats_info->sw_stat.mem_freed
3890                         += (nic->num_entries * sizeof(struct msix_entry));
3891                 kfree(nic->s2io_entries);
3892                 nic->mac_control.stats_info->sw_stat.mem_freed
3893                         += (nic->num_entries * sizeof(struct s2io_msix_entry));
3894                 nic->entries = NULL;
3895                 nic->s2io_entries = NULL;
3896                 return -ENOMEM;
3897         }
3898
3899         /*
3900          * To enable MSI-X, MSI also needs to be enabled, due to a bug
3901          * in the herc NIC. (Temp change, needs to be removed later)
3902          */
3903         pci_read_config_word(nic->pdev, 0x42, &msi_control);
3904         msi_control |= 0x1; /* Enable MSI */
3905         pci_write_config_word(nic->pdev, 0x42, msi_control);
3906
3907         return 0;
3908 }
3909
3910 /* Handle software interrupt used during MSI(X) test */
3911 static irqreturn_t s2io_test_intr(int irq, void *dev_id)
3912 {
3913         struct s2io_nic *sp = dev_id;
3914
3915         sp->msi_detected = 1;
3916         wake_up(&sp->msi_wait);
3917
3918         return IRQ_HANDLED;
3919 }
3920
3921 /* Test interrupt path by forcing a a software IRQ */
3922 static int s2io_test_msi(struct s2io_nic *sp)
3923 {
3924         struct pci_dev *pdev = sp->pdev;
3925         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3926         int err;
3927         u64 val64, saved64;
3928
3929         err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
3930                         sp->name, sp);
3931         if (err) {
3932                 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
3933                        sp->dev->name, pci_name(pdev), pdev->irq);
3934                 return err;
3935         }
3936
3937         init_waitqueue_head (&sp->msi_wait);
3938         sp->msi_detected = 0;
3939
3940         saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
3941         val64 |= SCHED_INT_CTRL_ONE_SHOT;
3942         val64 |= SCHED_INT_CTRL_TIMER_EN;
3943         val64 |= SCHED_INT_CTRL_INT2MSI(1);
3944         writeq(val64, &bar0->scheduled_int_ctrl);
3945
3946         wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
3947
3948         if (!sp->msi_detected) {
3949                 /* MSI(X) test failed, go back to INTx mode */
3950                 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
3951                         "using MSI(X) during test\n", sp->dev->name,
3952                         pci_name(pdev));
3953
3954                 err = -EOPNOTSUPP;
3955         }
3956
3957         free_irq(sp->entries[1].vector, sp);
3958
3959         writeq(saved64, &bar0->scheduled_int_ctrl);
3960
3961         return err;
3962 }
3963
3964 static void remove_msix_isr(struct s2io_nic *sp)
3965 {
3966         int i;
3967         u16 msi_control;
3968
3969         for (i = 0; i < sp->num_entries; i++) {
3970                 if (sp->s2io_entries[i].in_use ==
3971                         MSIX_REGISTERED_SUCCESS) {
3972                         int vector = sp->entries[i].vector;
3973                         void *arg = sp->s2io_entries[i].arg;
3974                         free_irq(vector, arg);
3975                 }
3976         }
3977
3978         kfree(sp->entries);
3979         kfree(sp->s2io_entries);
3980         sp->entries = NULL;
3981         sp->s2io_entries = NULL;
3982
3983         pci_read_config_word(sp->pdev, 0x42, &msi_control);
3984         msi_control &= 0xFFFE; /* Disable MSI */
3985         pci_write_config_word(sp->pdev, 0x42, msi_control);
3986
3987         pci_disable_msix(sp->pdev);
3988 }
3989
3990 static void remove_inta_isr(struct s2io_nic *sp)
3991 {
3992         struct net_device *dev = sp->dev;
3993
3994         free_irq(sp->pdev->irq, dev);
3995 }
3996
3997 /* ********************************************************* *
3998  * Functions defined below concern the OS part of the driver *
3999  * ********************************************************* */
4000
4001 /**
4002  *  s2io_open - open entry point of the driver
4003  *  @dev : pointer to the device structure.
4004  *  Description:
4005  *  This function is the open entry point of the driver. It mainly calls a
4006  *  function to allocate Rx buffers and inserts them into the buffer
4007  *  descriptors and then enables the Rx part of the NIC.
4008  *  Return value:
4009  *  0 on success and an appropriate (-)ve integer as defined in errno.h
4010  *   file on failure.
4011  */
4012
4013 static int s2io_open(struct net_device *dev)
4014 {
4015         struct s2io_nic *sp = dev->priv;
4016         int err = 0;
4017
4018         /*
4019          * Make sure you have link off by default every time
4020          * Nic is initialized
4021          */
4022         netif_carrier_off(dev);
4023         sp->last_link_state = 0;
4024
4025         /* Initialize H/W and enable interrupts */
4026         err = s2io_card_up(sp);
4027         if (err) {
4028                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
4029                           dev->name);
4030                 goto hw_init_failed;
4031         }
4032
4033         if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
4034                 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
4035                 s2io_card_down(sp);
4036                 err = -ENODEV;
4037                 goto hw_init_failed;
4038         }
4039         s2io_start_all_tx_queue(sp);
4040         return 0;
4041
4042 hw_init_failed:
4043         if (sp->config.intr_type == MSI_X) {
4044                 if (sp->entries) {
4045                         kfree(sp->entries);
4046                         sp->mac_control.stats_info->sw_stat.mem_freed
4047                         += (sp->num_entries * sizeof(struct msix_entry));
4048                 }
4049                 if (sp->s2io_entries) {
4050                         kfree(sp->s2io_entries);
4051                         sp->mac_control.stats_info->sw_stat.mem_freed
4052                         += (sp->num_entries * sizeof(struct s2io_msix_entry));
4053                 }
4054         }
4055         return err;
4056 }
4057
4058 /**
4059  *  s2io_close -close entry point of the driver
4060  *  @dev : device pointer.
4061  *  Description:
4062  *  This is the stop entry point of the driver. It needs to undo exactly
4063  *  whatever was done by the open entry point,thus it's usually referred to
4064  *  as the close function.Among other things this function mainly stops the
4065  *  Rx side of the NIC and frees all the Rx buffers in the Rx rings.
4066  *  Return value:
4067  *  0 on success and an appropriate (-)ve integer as defined in errno.h
4068  *  file on failure.
4069  */
4070
4071 static int s2io_close(struct net_device *dev)
4072 {
4073         struct s2io_nic *sp = dev->priv;
4074         struct config_param *config = &sp->config;
4075         u64 tmp64;
4076         int offset;
4077
4078         /* Return if the device is already closed               *
4079         *  Can happen when s2io_card_up failed in change_mtu    *
4080         */
4081         if (!is_s2io_card_up(sp))
4082                 return 0;
4083
4084         s2io_stop_all_tx_queue(sp);
4085         /* delete all populated mac entries */
4086         for (offset = 1; offset < config->max_mc_addr; offset++) {
4087                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
4088                 if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
4089                         do_s2io_delete_unicast_mc(sp, tmp64);
4090         }
4091
4092         s2io_card_down(sp);
4093
4094         return 0;
4095 }
4096
4097 /**
4098  *  s2io_xmit - Tx entry point of te driver
4099  *  @skb : the socket buffer containing the Tx data.
4100  *  @dev : device pointer.
4101  *  Description :
4102  *  This function is the Tx entry point of the driver. S2IO NIC supports
4103  *  certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
4104  *  NOTE: when device cant queue the pkt,just the trans_start variable will
4105  *  not be upadted.
4106  *  Return value:
4107  *  0 on success & 1 on failure.
4108  */
4109
4110 static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
4111 {
4112         struct s2io_nic *sp = dev->priv;
4113         u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
4114         register u64 val64;
4115         struct TxD *txdp;
4116         struct TxFIFO_element __iomem *tx_fifo;
4117         unsigned long flags = 0;
4118         u16 vlan_tag = 0;
4119         struct fifo_info *fifo = NULL;
4120         struct mac_info *mac_control;
4121         struct config_param *config;
4122         int do_spin_lock = 1;
4123         int offload_type;
4124         int enable_per_list_interrupt = 0;
4125         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
4126
4127         mac_control = &sp->mac_control;
4128         config = &sp->config;
4129
4130         DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
4131
4132         if (unlikely(skb->len <= 0)) {
4133                 DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
4134                 dev_kfree_skb_any(skb);
4135                 return 0;
4136         }
4137
4138         if (!is_s2io_card_up(sp)) {
4139                 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4140                           dev->name);
4141                 dev_kfree_skb(skb);
4142                 return 0;
4143         }
4144
4145         queue = 0;
4146         if (sp->vlgrp && vlan_tx_tag_present(skb))
4147                 vlan_tag = vlan_tx_tag_get(skb);
4148         if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
4149                 if (skb->protocol == htons(ETH_P_IP)) {
4150                         struct iphdr *ip;
4151                         struct tcphdr *th;
4152                         ip = ip_hdr(skb);
4153
4154                         if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
4155                                 th = (struct tcphdr *)(((unsigned char *)ip) +
4156                                                 ip->ihl*4);
4157
4158                                 if (ip->protocol == IPPROTO_TCP) {
4159                                         queue_len = sp->total_tcp_fifos;
4160                                         queue = (ntohs(th->source) +
4161                                                         ntohs(th->dest)) &
4162                                             sp->fifo_selector[queue_len - 1];
4163                                         if (queue >= queue_len)
4164                                                 queue = queue_len - 1;
4165                                 } else if (ip->protocol == IPPROTO_UDP) {
4166                                         queue_len = sp->total_udp_fifos;
4167                                         queue = (ntohs(th->source) +
4168                                                         ntohs(th->dest)) &
4169                                             sp->fifo_selector[queue_len - 1];
4170                                         if (queue >= queue_len)
4171                                                 queue = queue_len - 1;
4172                                         queue += sp->udp_fifo_idx;
4173                                         if (skb->len > 1024)
4174                                                 enable_per_list_interrupt = 1;
4175                                         do_spin_lock = 0;
4176                                 }
4177                         }
4178                 }
4179         } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
4180                 /* get fifo number based on skb->priority value */
4181                 queue = config->fifo_mapping
4182                                         [skb->priority & (MAX_TX_FIFOS - 1)];
4183         fifo = &mac_control->fifos[queue];
4184
4185         if (do_spin_lock)
4186                 spin_lock_irqsave(&fifo->tx_lock, flags);
4187         else {
4188                 if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
4189                         return NETDEV_TX_LOCKED;
4190         }
4191
4192 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
4193         if (sp->config.multiq) {
4194                 if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
4195                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4196                         return NETDEV_TX_BUSY;
4197                 }
4198         } else
4199 #endif
4200         if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
4201                 if (netif_queue_stopped(dev)) {
4202                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4203                         return NETDEV_TX_BUSY;
4204                 }
4205         }
4206
4207         put_off = (u16) fifo->tx_curr_put_info.offset;
4208         get_off = (u16) fifo->tx_curr_get_info.offset;
4209         txdp = (struct TxD *) fifo->list_info[put_off].list_virt_addr;
4210
4211         queue_len = fifo->tx_curr_put_info.fifo_len + 1;
4212         /* Avoid "put" pointer going beyond "get" pointer */
4213         if (txdp->Host_Control ||
4214                    ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4215                 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
4216                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4217                 dev_kfree_skb(skb);
4218                 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4219                 return 0;
4220         }
4221
4222         offload_type = s2io_offload_type(skb);
4223         if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
4224                 txdp->Control_1 |= TXD_TCP_LSO_EN;
4225                 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
4226         }
4227         if (skb->ip_summed == CHECKSUM_PARTIAL) {
4228                 txdp->Control_2 |=
4229                     (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
4230                      TXD_TX_CKO_UDP_EN);
4231         }
4232         txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
4233         txdp->Control_1 |= TXD_LIST_OWN_XENA;
4234         txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
4235         if (enable_per_list_interrupt)
4236                 if (put_off & (queue_len >> 5))
4237                         txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
4238         if (vlan_tag) {
4239                 txdp->Control_2 |= TXD_VLAN_ENABLE;
4240                 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
4241         }
4242
4243         frg_len = skb->len - skb->data_len;
4244         if (offload_type == SKB_GSO_UDP) {
4245                 int ufo_size;
4246
4247                 ufo_size = s2io_udp_mss(skb);
4248                 ufo_size &= ~7;
4249                 txdp->Control_1 |= TXD_UFO_EN;
4250                 txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
4251                 txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
4252 #ifdef __BIG_ENDIAN
4253                 /* both variants do cpu_to_be64(be32_to_cpu(...)) */
4254                 fifo->ufo_in_band_v[put_off] =
4255                                 (__force u64)skb_shinfo(skb)->ip6_frag_id;
4256 #else
4257                 fifo->ufo_in_band_v[put_off] =
4258                                 (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
4259 #endif
4260                 txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
4261                 txdp->Buffer_Pointer = pci_map_single(sp->pdev,
4262                                         fifo->ufo_in_band_v,
4263                                         sizeof(u64), PCI_DMA_TODEVICE);
4264                 if (pci_dma_mapping_error(txdp->Buffer_Pointer))
4265                         goto pci_map_failed;
4266                 txdp++;
4267         }
4268
4269         txdp->Buffer_Pointer = pci_map_single
4270             (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
4271         if (pci_dma_mapping_error(txdp->Buffer_Pointer))
4272                 goto pci_map_failed;
4273
4274         txdp->Host_Control = (unsigned long) skb;
4275         txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
4276         if (offload_type == SKB_GSO_UDP)
4277                 txdp->Control_1 |= TXD_UFO_EN;
4278
4279         frg_cnt = skb_shinfo(skb)->nr_frags;
4280         /* For fragmented SKB. */
4281         for (i = 0; i < frg_cnt; i++) {
4282                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
4283                 /* A '0' length fragment will be ignored */
4284                 if (!frag->size)
4285                         continue;
4286                 txdp++;
4287                 txdp->Buffer_Pointer = (u64) pci_map_page
4288                     (sp->pdev, frag->page, frag->page_offset,
4289                      frag->size, PCI_DMA_TODEVICE);
4290                 txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
4291                 if (offload_type == SKB_GSO_UDP)
4292                         txdp->Control_1 |= TXD_UFO_EN;
4293         }
4294         txdp->Control_1 |= TXD_GATHER_CODE_LAST;
4295
4296         if (offload_type == SKB_GSO_UDP)
4297                 frg_cnt++; /* as Txd0 was used for inband header */
4298
4299         tx_fifo = mac_control->tx_FIFO_start[queue];
4300         val64 = fifo->list_info[put_off].list_phy_addr;
4301         writeq(val64, &tx_fifo->TxDL_Pointer);
4302
4303         val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
4304                  TX_FIFO_LAST_LIST);
4305         if (offload_type)
4306                 val64 |= TX_FIFO_SPECIAL_FUNC;
4307
4308         writeq(val64, &tx_fifo->List_Control);
4309
4310         mmiowb();
4311
4312         put_off++;
4313         if (put_off == fifo->tx_curr_put_info.fifo_len + 1)
4314                 put_off = 0;
4315         fifo->tx_curr_put_info.offset = put_off;
4316
4317         /* Avoid "put" pointer going beyond "get" pointer */
4318         if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4319                 sp->mac_control.stats_info->sw_stat.fifo_full_cnt++;
4320                 DBG_PRINT(TX_DBG,
4321                           "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
4322                           put_off, get_off);
4323                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4324         }
4325         mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
4326         dev->trans_start = jiffies;
4327         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4328
4329         if (sp->config.intr_type == MSI_X)
4330                 tx_intr_handler(fifo);
4331
4332         return 0;
4333 pci_map_failed:
4334         stats->pci_map_fail_cnt++;
4335         s2io_stop_tx_queue(sp, fifo->fifo_no);
4336         stats->mem_freed += skb->truesize;
4337         dev_kfree_skb(skb);
4338         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4339         return 0;
4340 }
4341
4342 static void
4343 s2io_alarm_handle(unsigned long data)
4344 {
4345         struct s2io_nic *sp = (struct s2io_nic *)data;
4346         struct net_device *dev = sp->dev;
4347
4348         s2io_handle_errors(dev);
4349         mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
4350 }
4351
4352 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
4353 {
4354         struct ring_info *ring = (struct ring_info *)dev_id;
4355         struct s2io_nic *sp = ring->nic;
4356         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4357         struct net_device *dev = sp->dev;
4358
4359         if (unlikely(!is_s2io_card_up(sp)))
4360                 return IRQ_HANDLED;
4361
4362         if (sp->config.napi) {
4363                 u8 __iomem *addr = NULL;
4364                 u8 val8 = 0;
4365
4366                 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
4367                 addr += (7 - ring->ring_no);
4368                 val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
4369                 writeb(val8, addr);
4370                 val8 = readb(addr);
4371                 netif_rx_schedule(dev, &ring->napi);
4372         } else {
4373                 rx_intr_handler(ring, 0);
4374                 s2io_chk_rx_buffers(ring);
4375         }
4376
4377         return IRQ_HANDLED;
4378 }
4379
4380 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
4381 {
4382         int i;
4383         struct fifo_info *fifos = (struct fifo_info *)dev_id;
4384         struct s2io_nic *sp = fifos->nic;
4385         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4386         struct config_param *config  = &sp->config;
4387         u64 reason;
4388
4389         if (unlikely(!is_s2io_card_up(sp)))
4390                 return IRQ_NONE;
4391
4392         reason = readq(&bar0->general_int_status);
4393         if (unlikely(reason == S2IO_MINUS_ONE))
4394                 /* Nothing much can be done. Get out */
4395                 return IRQ_HANDLED;
4396
4397         writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4398
4399         if (reason & GEN_INTR_TXTRAFFIC)
4400                 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4401
4402         for (i = 0; i < config->tx_fifo_num; i++)
4403                 tx_intr_handler(&fifos[i]);
4404
4405         writeq(sp->general_int_mask, &bar0->general_int_mask);
4406         readl(&bar0->general_int_status);
4407
4408         return IRQ_HANDLED;
4409 }
4410
4411 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
4412 {
4413         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4414         u64 val64;
4415
4416         val64 = readq(&bar0->pic_int_status);
4417         if (val64 & PIC_INT_GPIO) {
4418                 val64 = readq(&bar0->gpio_int_reg);
4419                 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
4420                     (val64 & GPIO_INT_REG_LINK_UP)) {
4421                         /*
4422                          * This is unstable state so clear both up/down
4423                          * interrupt and adapter to re-evaluate the link state.
4424                          */
4425                         val64 |=  GPIO_INT_REG_LINK_DOWN;
4426                         val64 |= GPIO_INT_REG_LINK_UP;
4427                         writeq(val64, &bar0->gpio_int_reg);
4428                         val64 = readq(&bar0->gpio_int_mask);
4429                         val64 &= ~(GPIO_INT_MASK_LINK_UP |
4430                                    GPIO_INT_MASK_LINK_DOWN);
4431                         writeq(val64, &bar0->gpio_int_mask);
4432                 }
4433                 else if (val64 & GPIO_INT_REG_LINK_UP) {
4434                         val64 = readq(&bar0->adapter_status);
4435                                 /* Enable Adapter */
4436                         val64 = readq(&bar0->adapter_control);
4437                         val64 |= ADAPTER_CNTL_EN;
4438                         writeq(val64, &bar0->adapter_control);
4439                         val64 |= ADAPTER_LED_ON;
4440                         writeq(val64, &bar0->adapter_control);
4441                         if (!sp->device_enabled_once)
4442                                 sp->device_enabled_once = 1;
4443
4444                         s2io_link(sp, LINK_UP);
4445                         /*
4446                          * unmask link down interrupt and mask link-up
4447                          * intr
4448                          */
4449                         val64 = readq(&bar0->gpio_int_mask);
4450                         val64 &= ~GPIO_INT_MASK_LINK_DOWN;
4451                         val64 |= GPIO_INT_MASK_LINK_UP;
4452                         writeq(val64, &bar0->gpio_int_mask);
4453
4454                 }else if (val64 & GPIO_INT_REG_LINK_DOWN) {
4455                         val64 = readq(&bar0->adapter_status);
4456                         s2io_link(sp, LINK_DOWN);
4457                         /* Link is down so unmaks link up interrupt */
4458                         val64 = readq(&bar0->gpio_int_mask);
4459                         val64 &= ~GPIO_INT_MASK_LINK_UP;
4460                         val64 |= GPIO_INT_MASK_LINK_DOWN;
4461                         writeq(val64, &bar0->gpio_int_mask);
4462
4463                         /* turn off LED */
4464                         val64 = readq(&bar0->adapter_control);
4465                         val64 = val64 &(~ADAPTER_LED_ON);
4466                         writeq(val64, &bar0->adapter_control);
4467                 }
4468         }
4469         val64 = readq(&bar0->gpio_int_mask);
4470 }
4471
4472 /**
4473  *  do_s2io_chk_alarm_bit - Check for alarm and incrment the counter
4474  *  @value: alarm bits
4475  *  @addr: address value
4476  *  @cnt: counter variable
4477  *  Description: Check for alarm and increment the counter
4478  *  Return Value:
4479  *  1 - if alarm bit set
4480  *  0 - if alarm bit is not set
4481  */
4482 static int do_s2io_chk_alarm_bit(u64 value, void __iomem * addr,
4483                           unsigned long long *cnt)
4484 {
4485         u64 val64;
4486         val64 = readq(addr);
4487         if ( val64 & value ) {
4488                 writeq(val64, addr);
4489                 (*cnt)++;
4490                 return 1;
4491         }
4492         return 0;
4493
4494 }
4495
4496 /**
4497  *  s2io_handle_errors - Xframe error indication handler
4498  *  @nic: device private variable
4499  *  Description: Handle alarms such as loss of link, single or
4500  *  double ECC errors, critical and serious errors.
4501  *  Return Value:
4502  *  NONE
4503  */
4504 static void s2io_handle_errors(void * dev_id)
4505 {
4506         struct net_device *dev = (struct net_device *) dev_id;
4507         struct s2io_nic *sp = dev->priv;
4508         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4509         u64 temp64 = 0,val64=0;
4510         int i = 0;
4511
4512         struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
4513         struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat;
4514
4515         if (!is_s2io_card_up(sp))
4516                 return;
4517
4518         if (pci_channel_offline(sp->pdev))
4519                 return;
4520
4521         memset(&sw_stat->ring_full_cnt, 0,
4522                 sizeof(sw_stat->ring_full_cnt));
4523
4524         /* Handling the XPAK counters update */
4525         if(stats->xpak_timer_count < 72000) {
4526                 /* waiting for an hour */
4527                 stats->xpak_timer_count++;
4528         } else {
4529                 s2io_updt_xpak_counter(dev);
4530                 /* reset the count to zero */
4531                 stats->xpak_timer_count = 0;
4532         }
4533
4534         /* Handling link status change error Intr */
4535         if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) {
4536                 val64 = readq(&bar0->mac_rmac_err_reg);
4537                 writeq(val64, &bar0->mac_rmac_err_reg);
4538                 if (val64 & RMAC_LINK_STATE_CHANGE_INT)
4539                         schedule_work(&sp->set_link_task);
4540         }
4541
4542         /* In case of a serious error, the device will be Reset. */
4543         if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
4544                                 &sw_stat->serious_err_cnt))
4545                 goto reset;
4546
4547         /* Check for data parity error */
4548         if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
4549                                 &sw_stat->parity_err_cnt))
4550                 goto reset;
4551
4552         /* Check for ring full counter */
4553         if (sp->device_type == XFRAME_II_DEVICE) {
4554                 val64 = readq(&bar0->ring_bump_counter1);
4555                 for (i=0; i<4; i++) {
4556                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4557                         temp64 >>= 64 - ((i+1)*16);
4558                         sw_stat->ring_full_cnt[i] += temp64;
4559                 }
4560
4561                 val64 = readq(&bar0->ring_bump_counter2);
4562                 for (i=0; i<4; i++) {
4563                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4564                         temp64 >>= 64 - ((i+1)*16);
4565                          sw_stat->ring_full_cnt[i+4] += temp64;
4566                 }
4567         }
4568
4569         val64 = readq(&bar0->txdma_int_status);
4570         /*check for pfc_err*/
4571         if (val64 & TXDMA_PFC_INT) {
4572                 if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM|
4573                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR|
4574                                 PFC_PCIX_ERR, &bar0->pfc_err_reg,
4575                                 &sw_stat->pfc_err_cnt))
4576                         goto reset;
4577                 do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR, &bar0->pfc_err_reg,
4578                                 &sw_stat->pfc_err_cnt);
4579         }
4580
4581         /*check for tda_err*/
4582         if (val64 & TXDMA_TDA_INT) {
4583                 if(do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
4584                                 TDA_SM1_ERR_ALARM, &bar0->tda_err_reg,
4585                                 &sw_stat->tda_err_cnt))
4586                         goto reset;
4587                 do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
4588                                 &bar0->tda_err_reg, &sw_stat->tda_err_cnt);
4589         }
4590         /*check for pcc_err*/
4591         if (val64 & TXDMA_PCC_INT) {
4592                 if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM
4593                                 | PCC_N_SERR | PCC_6_COF_OV_ERR
4594                                 | PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR
4595                                 | PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR
4596                                 | PCC_TXB_ECC_DB_ERR, &bar0->pcc_err_reg,
4597                                 &sw_stat->pcc_err_cnt))
4598                         goto reset;
4599                 do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
4600                                 &bar0->pcc_err_reg, &sw_stat->pcc_err_cnt);
4601         }
4602
4603         /*check for tti_err*/
4604         if (val64 & TXDMA_TTI_INT) {
4605                 if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM, &bar0->tti_err_reg,
4606                                 &sw_stat->tti_err_cnt))
4607                         goto reset;
4608                 do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
4609                                 &bar0->tti_err_reg, &sw_stat->tti_err_cnt);
4610         }
4611
4612         /*check for lso_err*/
4613         if (val64 & TXDMA_LSO_INT) {
4614                 if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT
4615                                 | LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
4616                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt))
4617                         goto reset;
4618                 do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
4619                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt);
4620         }
4621
4622         /*check for tpa_err*/
4623         if (val64 & TXDMA_TPA_INT) {
4624                 if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM, &bar0->tpa_err_reg,
4625                         &sw_stat->tpa_err_cnt))
4626                         goto reset;
4627                 do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP, &bar0->tpa_err_reg,
4628                         &sw_stat->tpa_err_cnt);
4629         }
4630
4631         /*check for sm_err*/
4632         if (val64 & TXDMA_SM_INT) {
4633                 if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM, &bar0->sm_err_reg,
4634                         &sw_stat->sm_err_cnt))
4635                         goto reset;
4636         }
4637
4638         val64 = readq(&bar0->mac_int_status);
4639         if (val64 & MAC_INT_STATUS_TMAC_INT) {
4640                 if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
4641                                 &bar0->mac_tmac_err_reg,
4642                                 &sw_stat->mac_tmac_err_cnt))
4643                         goto reset;
4644                 do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR
4645                                 | TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
4646                                 &bar0->mac_tmac_err_reg,
4647                                 &sw_stat->mac_tmac_err_cnt);
4648         }
4649
4650         val64 = readq(&bar0->xgxs_int_status);
4651         if (val64 & XGXS_INT_STATUS_TXGXS) {
4652                 if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
4653                                 &bar0->xgxs_txgxs_err_reg,
4654                                 &sw_stat->xgxs_txgxs_err_cnt))
4655                         goto reset;
4656                 do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
4657                                 &bar0->xgxs_txgxs_err_reg,
4658                                 &sw_stat->xgxs_txgxs_err_cnt);
4659         }
4660
4661         val64 = readq(&bar0->rxdma_int_status);
4662         if (val64 & RXDMA_INT_RC_INT_M) {
4663                 if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR
4664                                 | RC_PRCn_SM_ERR_ALARM |RC_FTC_SM_ERR_ALARM,
4665                                 &bar0->rc_err_reg, &sw_stat->rc_err_cnt))
4666                         goto reset;
4667                 do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR
4668                                 | RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
4669                                 &sw_stat->rc_err_cnt);
4670                 if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn
4671                                 | PRC_PCI_AB_F_WR_Rn, &bar0->prc_pcix_err_reg,
4672                                 &sw_stat->prc_pcix_err_cnt))
4673                         goto reset;
4674                 do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn | PRC_PCI_DP_WR_Rn
4675                                 | PRC_PCI_DP_F_WR_Rn, &bar0->prc_pcix_err_reg,
4676                                 &sw_stat->prc_pcix_err_cnt);
4677         }
4678
4679         if (val64 & RXDMA_INT_RPA_INT_M) {
4680                 if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
4681                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt))
4682                         goto reset;
4683                 do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
4684                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt);
4685         }
4686
4687         if (val64 & RXDMA_INT_RDA_INT_M) {
4688                 if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR
4689                                 | RDA_FRM_ECC_DB_N_AERR | RDA_SM1_ERR_ALARM
4690                                 | RDA_SM0_ERR_ALARM | RDA_RXD_ECC_DB_SERR,
4691                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt))
4692                         goto reset;
4693                 do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR | RDA_FRM_ECC_SG_ERR
4694                                 | RDA_MISC_ERR | RDA_PCIX_ERR,
4695                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt);
4696         }
4697
4698         if (val64 & RXDMA_INT_RTI_INT_M) {
4699                 if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM, &bar0->rti_err_reg,
4700                                 &sw_stat->rti_err_cnt))
4701                         goto reset;
4702                 do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
4703                                 &bar0->rti_err_reg, &sw_stat->rti_err_cnt);
4704         }
4705
4706         val64 = readq(&bar0->mac_int_status);
4707         if (val64 & MAC_INT_STATUS_RMAC_INT) {
4708                 if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
4709                                 &bar0->mac_rmac_err_reg,
4710                                 &sw_stat->mac_rmac_err_cnt))
4711                         goto reset;
4712                 do_s2io_chk_alarm_bit(RMAC_UNUSED_INT|RMAC_SINGLE_ECC_ERR|
4713                                 RMAC_DOUBLE_ECC_ERR, &bar0->mac_rmac_err_reg,
4714                                 &sw_stat->mac_rmac_err_cnt);
4715         }
4716
4717         val64 = readq(&bar0->xgxs_int_status);
4718         if (val64 & XGXS_INT_STATUS_RXGXS) {
4719                 if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
4720                                 &bar0->xgxs_rxgxs_err_reg,
4721                                 &sw_stat->xgxs_rxgxs_err_cnt))
4722                         goto reset;
4723         }
4724
4725         val64 = readq(&bar0->mc_int_status);
4726         if(val64 & MC_INT_STATUS_MC_INT) {
4727                 if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR, &bar0->mc_err_reg,
4728                                 &sw_stat->mc_err_cnt))
4729                         goto reset;
4730
4731                 /* Handling Ecc errors */
4732                 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
4733                         writeq(val64, &bar0->mc_err_reg);
4734                         if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
4735                                 sw_stat->double_ecc_errs++;
4736                                 if (sp->device_type != XFRAME_II_DEVICE) {
4737                                         /*
4738                                          * Reset XframeI only if critical error
4739                                          */
4740                                         if (val64 &
4741                                                 (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
4742                                                 MC_ERR_REG_MIRI_ECC_DB_ERR_1))
4743                                                                 goto reset;
4744                                         }
4745                         } else
4746                                 sw_stat->single_ecc_errs++;
4747                 }
4748         }
4749         return;
4750
4751 reset:
4752         s2io_stop_all_tx_queue(sp);
4753         schedule_work(&sp->rst_timer_task);
4754         sw_stat->soft_reset_cnt++;
4755         return;
4756 }
4757
4758 /**
4759  *  s2io_isr - ISR handler of the device .
4760  *  @irq: the irq of the device.
4761  *  @dev_id: a void pointer to the dev structure of the NIC.
4762  *  Description:  This function is the ISR handler of the device. It
4763  *  identifies the reason for the interrupt and calls the relevant
4764  *  service routines. As a contongency measure, this ISR allocates the
4765  *  recv buffers, if their numbers are below the panic value which is
4766  *  presently set to 25% of the original number of rcv buffers allocated.
4767  *  Return value:
4768  *   IRQ_HANDLED: will be returned if IRQ was handled by this routine
4769  *   IRQ_NONE: will be returned if interrupt is not from our device
4770  */
4771 static irqreturn_t s2io_isr(int irq, void *dev_id)
4772 {
4773         struct net_device *dev = (struct net_device *) dev_id;
4774         struct s2io_nic *sp = dev->priv;
4775         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4776         int i;
4777         u64 reason = 0;
4778         struct mac_info *mac_control;
4779         struct config_param *config;
4780
4781         /* Pretend we handled any irq's from a disconnected card */
4782         if (pci_channel_offline(sp->pdev))
4783                 return IRQ_NONE;
4784
4785         if (!is_s2io_card_up(sp))
4786                 return IRQ_NONE;
4787
4788         mac_control = &sp->mac_control;
4789         config = &sp->config;
4790
4791         /*
4792          * Identify the cause for interrupt and call the appropriate
4793          * interrupt handler. Causes for the interrupt could be;
4794          * 1. Rx of packet.
4795          * 2. Tx complete.
4796          * 3. Link down.
4797          */
4798         reason = readq(&bar0->general_int_status);
4799
4800         if (unlikely(reason == S2IO_MINUS_ONE) ) {
4801                 /* Nothing much can be done. Get out */
4802                 return IRQ_HANDLED;
4803         }
4804
4805         if (reason & (GEN_INTR_RXTRAFFIC |
4806                 GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC))
4807         {
4808                 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4809
4810                 if (config->napi) {
4811                         if (reason & GEN_INTR_RXTRAFFIC) {
4812                                 netif_rx_schedule(dev, &sp->napi);
4813                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
4814                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4815                                 readl(&bar0->rx_traffic_int);
4816                         }
4817                 } else {
4818                         /*
4819                          * rx_traffic_int reg is an R1 register, writing all 1's
4820                          * will ensure that the actual interrupt causing bit
4821                          * get's cleared and hence a read can be avoided.
4822                          */
4823                         if (reason & GEN_INTR_RXTRAFFIC)
4824                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4825
4826                         for (i = 0; i < config->rx_ring_num; i++)
4827                                 rx_intr_handler(&mac_control->rings[i], 0);
4828                 }
4829
4830                 /*
4831                  * tx_traffic_int reg is an R1 register, writing all 1's
4832                  * will ensure that the actual interrupt causing bit get's
4833                  * cleared and hence a read can be avoided.
4834                  */
4835                 if (reason & GEN_INTR_TXTRAFFIC)
4836                         writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4837
4838                 for (i = 0; i < config->tx_fifo_num; i++)
4839                         tx_intr_handler(&mac_control->fifos[i]);
4840
4841                 if (reason & GEN_INTR_TXPIC)
4842                         s2io_txpic_intr_handle(sp);
4843
4844                 /*
4845                  * Reallocate the buffers from the interrupt handler itself.
4846                  */
4847                 if (!config->napi) {
4848                         for (i = 0; i < config->rx_ring_num; i++)
4849                                 s2io_chk_rx_buffers(&mac_control->rings[i]);
4850                 }
4851                 writeq(sp->general_int_mask, &bar0->general_int_mask);
4852                 readl(&bar0->general_int_status);
4853
4854                 return IRQ_HANDLED;
4855
4856         }
4857         else if (!reason) {
4858                 /* The interrupt was not raised by us */
4859                 return IRQ_NONE;
4860         }
4861
4862         return IRQ_HANDLED;
4863 }
4864
4865 /**
4866  * s2io_updt_stats -
4867  */
4868 static void s2io_updt_stats(struct s2io_nic *sp)
4869 {
4870         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4871         u64 val64;
4872         int cnt = 0;
4873
4874         if (is_s2io_card_up(sp)) {
4875                 /* Apprx 30us on a 133 MHz bus */
4876                 val64 = SET_UPDT_CLICKS(10) |
4877                         STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
4878                 writeq(val64, &bar0->stat_cfg);
4879                 do {
4880                         udelay(100);
4881                         val64 = readq(&bar0->stat_cfg);
4882                         if (!(val64 & s2BIT(0)))
4883                                 break;
4884                         cnt++;
4885                         if (cnt == 5)
4886                                 break; /* Updt failed */
4887                 } while(1);
4888         }
4889 }
4890
4891 /**
4892  *  s2io_get_stats - Updates the device statistics structure.
4893  *  @dev : pointer to the device structure.
4894  *  Description:
4895  *  This function updates the device statistics structure in the s2io_nic
4896  *  structure and returns a pointer to the same.
4897  *  Return value:
4898  *  pointer to the updated net_device_stats structure.
4899  */
4900
4901 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
4902 {
4903         struct s2io_nic *sp = dev->priv;
4904         struct mac_info *mac_control;
4905         struct config_param *config;
4906         int i;
4907
4908
4909         mac_control = &sp->mac_control;
4910         config = &sp->config;
4911
4912         /* Configure Stats for immediate updt */
4913         s2io_updt_stats(sp);
4914
4915         sp->stats.tx_packets =
4916                 le32_to_cpu(mac_control->stats_info->tmac_frms);
4917         sp->stats.tx_errors =
4918                 le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
4919         sp->stats.rx_errors =
4920                 le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
4921         sp->stats.multicast =
4922                 le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
4923         sp->stats.rx_length_errors =
4924                 le64_to_cpu(mac_control->stats_info->rmac_long_frms);
4925
4926         /* collect per-ring rx_packets and rx_bytes */
4927         sp->stats.rx_packets = sp->stats.rx_bytes = 0;
4928         for (i = 0; i < config->rx_ring_num; i++) {
4929                 sp->stats.rx_packets += mac_control->rings[i].rx_packets;
4930                 sp->stats.rx_bytes += mac_control->rings[i].rx_bytes;
4931         }
4932
4933         return (&sp->stats);
4934 }
4935
4936 /**
4937  *  s2io_set_multicast - entry point for multicast address enable/disable.
4938  *  @dev : pointer to the device structure
4939  *  Description:
4940  *  This function is a driver entry point which gets called by the kernel
4941  *  whenever multicast addresses must be enabled/disabled. This also gets
4942  *  called to set/reset promiscuous mode. Depending on the deivce flag, we
4943  *  determine, if multicast address must be enabled or if promiscuous mode
4944  *  is to be disabled etc.
4945  *  Return value:
4946  *  void.
4947  */
4948
4949 static void s2io_set_multicast(struct net_device *dev)
4950 {
4951         int i, j, prev_cnt;
4952         struct dev_mc_list *mclist;
4953         struct s2io_nic *sp = dev->priv;
4954         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4955         u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
4956             0xfeffffffffffULL;
4957         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
4958         void __iomem *add;
4959         struct config_param *config = &sp->config;
4960
4961         if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
4962                 /*  Enable all Multicast addresses */
4963                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
4964                        &bar0->rmac_addr_data0_mem);
4965                 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
4966                        &bar0->rmac_addr_data1_mem);
4967                 val64 = RMAC_ADDR_CMD_MEM_WE |
4968                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4969                     RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
4970                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4971                 /* Wait till command completes */
4972                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4973                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4974                                         S2IO_BIT_RESET);
4975
4976                 sp->m_cast_flg = 1;
4977                 sp->all_multi_pos = config->max_mc_addr - 1;
4978         } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
4979                 /*  Disable all Multicast addresses */
4980                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4981                        &bar0->rmac_addr_data0_mem);
4982                 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4983                        &bar0->rmac_addr_data1_mem);
4984                 val64 = RMAC_ADDR_CMD_MEM_WE |
4985                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4986                     RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
4987                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4988                 /* Wait till command completes */
4989                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4990                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4991                                         S2IO_BIT_RESET);
4992
4993                 sp->m_cast_flg = 0;
4994                 sp->all_multi_pos = 0;
4995         }
4996
4997         if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
4998                 /*  Put the NIC into promiscuous mode */
4999                 add = &bar0->mac_cfg;
5000                 val64 = readq(&bar0->mac_cfg);
5001                 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
5002
5003                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5004                 writel((u32) val64, add);
5005                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5006                 writel((u32) (val64 >> 32), (add + 4));
5007
5008                 if (vlan_tag_strip != 1) {
5009                         val64 = readq(&bar0->rx_pa_cfg);
5010                         val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
5011                         writeq(val64, &bar0->rx_pa_cfg);
5012                         vlan_strip_flag = 0;
5013                 }
5014
5015                 val64 = readq(&bar0->mac_cfg);
5016                 sp->promisc_flg = 1;
5017                 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
5018                           dev->name);
5019         } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
5020                 /*  Remove the NIC from promiscuous mode */
5021                 add = &bar0->mac_cfg;
5022                 val64 = readq(&bar0->mac_cfg);
5023                 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
5024
5025                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5026                 writel((u32) val64, add);
5027                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5028                 writel((u32) (val64 >> 32), (add + 4));
5029
5030                 if (vlan_tag_strip != 0) {
5031                         val64 = readq(&bar0->rx_pa_cfg);
5032                         val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
5033                         writeq(val64, &bar0->rx_pa_cfg);
5034                         vlan_strip_flag = 1;
5035                 }
5036
5037                 val64 = readq(&bar0->mac_cfg);
5038                 sp->promisc_flg = 0;
5039                 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
5040                           dev->name);
5041         }
5042
5043         /*  Update individual M_CAST address list */
5044         if ((!sp->m_cast_flg) && dev->mc_count) {
5045                 if (dev->mc_count >
5046                     (config->max_mc_addr - config->max_mac_addr)) {
5047                         DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
5048                                   dev->name);
5049                         DBG_PRINT(ERR_DBG, "can be added, please enable ");
5050                         DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
5051                         return;
5052                 }
5053
5054                 prev_cnt = sp->mc_addr_count;
5055                 sp->mc_addr_count = dev->mc_count;
5056
5057                 /* Clear out the previous list of Mc in the H/W. */
5058                 for (i = 0; i < prev_cnt; i++) {
5059                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
5060                                &bar0->rmac_addr_data0_mem);
5061                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5062                                 &bar0->rmac_addr_data1_mem);
5063                         val64 = RMAC_ADDR_CMD_MEM_WE |
5064                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5065                             RMAC_ADDR_CMD_MEM_OFFSET
5066                             (config->mc_start_offset + i);
5067                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5068
5069                         /* Wait for command completes */
5070                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5071                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5072                                         S2IO_BIT_RESET)) {
5073                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5074                                           dev->name);
5075                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5076                                 return;
5077                         }
5078                 }
5079
5080                 /* Create the new Rx filter list and update the same in H/W. */
5081                 for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
5082                      i++, mclist = mclist->next) {
5083                         memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
5084                                ETH_ALEN);
5085                         mac_addr = 0;
5086                         for (j = 0; j < ETH_ALEN; j++) {
5087                                 mac_addr |= mclist->dmi_addr[j];
5088                                 mac_addr <<= 8;
5089                         }
5090                         mac_addr >>= 8;
5091                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
5092                                &bar0->rmac_addr_data0_mem);
5093                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5094                                 &bar0->rmac_addr_data1_mem);
5095                         val64 = RMAC_ADDR_CMD_MEM_WE |
5096                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5097                             RMAC_ADDR_CMD_MEM_OFFSET
5098                             (i + config->mc_start_offset);
5099                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5100
5101                         /* Wait for command completes */
5102                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5103                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5104                                         S2IO_BIT_RESET)) {
5105                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5106                                           dev->name);
5107                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5108                                 return;
5109                         }
5110                 }
5111         }
5112 }
5113
5114 /* read from CAM unicast & multicast addresses and store it in
5115  * def_mac_addr structure
5116  */
5117 void do_s2io_store_unicast_mc(struct s2io_nic *sp)
5118 {
5119         int offset;
5120         u64 mac_addr = 0x0;
5121         struct config_param *config = &sp->config;
5122
5123         /* store unicast & multicast mac addresses */
5124         for (offset = 0; offset < config->max_mc_addr; offset++) {
5125                 mac_addr = do_s2io_read_unicast_mc(sp, offset);
5126                 /* if read fails disable the entry */
5127                 if (mac_addr == FAILURE)
5128                         mac_addr = S2IO_DISABLE_MAC_ENTRY;
5129                 do_s2io_copy_mac_addr(sp, offset, mac_addr);
5130         }
5131 }
5132
5133 /* restore unicast & multicast MAC to CAM from def_mac_addr structure */
5134 static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
5135 {
5136         int offset;
5137         struct config_param *config = &sp->config;
5138         /* restore unicast mac address */
5139         for (offset = 0; offset < config->max_mac_addr; offset++)
5140                 do_s2io_prog_unicast(sp->dev,
5141                         sp->def_mac_addr[offset].mac_addr);
5142
5143         /* restore multicast mac address */
5144         for (offset = config->mc_start_offset;
5145                 offset < config->max_mc_addr; offset++)
5146                 do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
5147 }
5148
5149 /* add a multicast MAC address to CAM */
5150 static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
5151 {
5152         int i;
5153         u64 mac_addr = 0;
5154         struct config_param *config = &sp->config;
5155
5156         for (i = 0; i < ETH_ALEN; i++) {
5157                 mac_addr <<= 8;
5158                 mac_addr |= addr[i];
5159         }
5160         if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
5161                 return SUCCESS;
5162
5163         /* check if the multicast mac already preset in CAM */
5164         for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
5165                 u64 tmp64;
5166                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5167                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5168                         break;
5169
5170                 if (tmp64 == mac_addr)
5171                         return SUCCESS;
5172         }
5173         if (i == config->max_mc_addr) {
5174                 DBG_PRINT(ERR_DBG,
5175                         "CAM full no space left for multicast MAC\n");
5176                 return FAILURE;
5177         }
5178         /* Update the internal structure with this new mac address */
5179         do_s2io_copy_mac_addr(sp, i, mac_addr);
5180
5181         return (do_s2io_add_mac(sp, mac_addr, i));
5182 }
5183
5184 /* add MAC address to CAM */
5185 static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
5186 {
5187         u64 val64;
5188         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5189
5190         writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
5191                 &bar0->rmac_addr_data0_mem);
5192
5193         val64 =
5194                 RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5195                 RMAC_ADDR_CMD_MEM_OFFSET(off);
5196         writeq(val64, &bar0->rmac_addr_cmd_mem);
5197
5198         /* Wait till command completes */
5199         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5200                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5201                 S2IO_BIT_RESET)) {
5202                 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
5203                 return FAILURE;
5204         }
5205         return SUCCESS;
5206 }
5207 /* deletes a specified unicast/multicast mac entry from CAM */
5208 static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
5209 {
5210         int offset;
5211         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
5212         struct config_param *config = &sp->config;
5213
5214         for (offset = 1;
5215                 offset < config->max_mc_addr; offset++) {
5216                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
5217                 if (tmp64 == addr) {
5218                         /* disable the entry by writing  0xffffffffffffULL */
5219                         if (do_s2io_add_mac(sp, dis_addr, offset) ==  FAILURE)
5220                                 return FAILURE;
5221                         /* store the new mac list from CAM */
5222                         do_s2io_store_unicast_mc(sp);
5223                         return SUCCESS;
5224                 }
5225         }
5226         DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
5227                         (unsigned long long)addr);
5228         return FAILURE;
5229 }
5230
5231 /* read mac entries from CAM */
5232 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
5233 {
5234         u64 tmp64 = 0xffffffffffff0000ULL, val64;
5235         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5236
5237         /* read mac addr */
5238         val64 =
5239                 RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5240                 RMAC_ADDR_CMD_MEM_OFFSET(offset);
5241         writeq(val64, &bar0->rmac_addr_cmd_mem);
5242
5243         /* Wait till command completes */
5244         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5245                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5246                 S2IO_BIT_RESET)) {
5247                 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
5248                 return FAILURE;
5249         }
5250         tmp64 = readq(&bar0->rmac_addr_data0_mem);
5251         return (tmp64 >> 16);
5252 }
5253
5254 /**
5255  * s2io_set_mac_addr driver entry point
5256  */
5257
5258 static int s2io_set_mac_addr(struct net_device *dev, void *p)
5259 {
5260         struct sockaddr *addr = p;
5261
5262         if (!is_valid_ether_addr(addr->sa_data))
5263                 return -EINVAL;
5264
5265         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
5266
5267         /* store the MAC address in CAM */
5268         return (do_s2io_prog_unicast(dev, dev->dev_addr));
5269 }
5270 /**
5271  *  do_s2io_prog_unicast - Programs the Xframe mac address
5272  *  @dev : pointer to the device structure.
5273  *  @addr: a uchar pointer to the new mac address which is to be set.
5274  *  Description : This procedure will program the Xframe to receive
5275  *  frames with new Mac Address
5276  *  Return value: SUCCESS on success and an appropriate (-)ve integer
5277  *  as defined in errno.h file on failure.
5278  */
5279
5280 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
5281 {
5282         struct s2io_nic *sp = dev->priv;
5283         register u64 mac_addr = 0, perm_addr = 0;
5284         int i;
5285         u64 tmp64;
5286         struct config_param *config = &sp->config;
5287
5288         /*
5289         * Set the new MAC address as the new unicast filter and reflect this
5290         * change on the device address registered with the OS. It will be
5291         * at offset 0.
5292         */
5293         for (i = 0; i < ETH_ALEN; i++) {
5294                 mac_addr <<= 8;
5295                 mac_addr |= addr[i];
5296                 perm_addr <<= 8;
5297                 perm_addr |= sp->def_mac_addr[0].mac_addr[i];
5298         }
5299
5300         /* check if the dev_addr is different than perm_addr */
5301         if (mac_addr == perm_addr)
5302                 return SUCCESS;
5303
5304         /* check if the mac already preset in CAM */
5305         for (i = 1; i < config->max_mac_addr; i++) {
5306                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5307                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5308                         break;
5309
5310                 if (tmp64 == mac_addr) {
5311                         DBG_PRINT(INFO_DBG,
5312                         "MAC addr:0x%llx already present in CAM\n",
5313                         (unsigned long long)mac_addr);
5314                         return SUCCESS;
5315                 }
5316         }
5317         if (i == config->max_mac_addr) {
5318                 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
5319                 return FAILURE;
5320         }
5321         /* Update the internal structure with this new mac address */
5322         do_s2io_copy_mac_addr(sp, i, mac_addr);
5323         return (do_s2io_add_mac(sp, mac_addr, i));
5324 }
5325
5326 /**
5327  * s2io_ethtool_sset - Sets different link parameters.
5328  * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
5329  * @info: pointer to the structure with parameters given by ethtool to set
5330  * link information.
5331  * Description:
5332  * The function sets different link parameters provided by the user onto
5333  * the NIC.
5334  * Return value:
5335  * 0 on success.
5336 */
5337
5338 static int s2io_ethtool_sset(struct net_device *dev,
5339                              struct ethtool_cmd *info)
5340 {
5341         struct s2io_nic *sp = dev->priv;
5342         if ((info->autoneg == AUTONEG_ENABLE) ||
5343             (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
5344                 return -EINVAL;
5345         else {
5346                 s2io_close(sp->dev);
5347                 s2io_open(sp->dev);
5348         }
5349
5350         return 0;
5351 }
5352
5353 /**
5354  * s2io_ethtol_gset - Return link specific information.
5355  * @sp : private member of the device structure, pointer to the
5356  *      s2io_nic structure.
5357  * @info : pointer to the structure with parameters given by ethtool
5358  * to return link information.
5359  * Description:
5360  * Returns link specific information like speed, duplex etc.. to ethtool.
5361  * Return value :
5362  * return 0 on success.
5363  */
5364
5365 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
5366 {
5367         struct s2io_nic *sp = dev->priv;
5368         info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5369         info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5370         info->port = PORT_FIBRE;
5371
5372         /* info->transceiver */
5373         info->transceiver = XCVR_EXTERNAL;
5374
5375         if (netif_carrier_ok(sp->dev)) {
5376                 info->speed = 10000;
5377                 info->duplex = DUPLEX_FULL;
5378         } else {
5379                 info->speed = -1;
5380                 info->duplex = -1;
5381         }
5382
5383         info->autoneg = AUTONEG_DISABLE;
5384         return 0;
5385 }
5386
5387 /**
5388  * s2io_ethtool_gdrvinfo - Returns driver specific information.
5389  * @sp : private member of the device structure, which is a pointer to the
5390  * s2io_nic structure.
5391  * @info : pointer to the structure with parameters given by ethtool to
5392  * return driver information.
5393  * Description:
5394  * Returns driver specefic information like name, version etc.. to ethtool.
5395  * Return value:
5396  *  void
5397  */
5398
5399 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
5400                                   struct ethtool_drvinfo *info)
5401 {
5402         struct s2io_nic *sp = dev->priv;
5403
5404         strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
5405         strncpy(info->version, s2io_driver_version, sizeof(info->version));
5406         strncpy(info->fw_version, "", sizeof(info->fw_version));
5407         strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
5408         info->regdump_len = XENA_REG_SPACE;
5409         info->eedump_len = XENA_EEPROM_SPACE;
5410 }
5411
5412 /**
5413  *  s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
5414  *  @sp: private member of the device structure, which is a pointer to the
5415  *  s2io_nic structure.
5416  *  @regs : pointer to the structure with parameters given by ethtool for
5417  *  dumping the registers.
5418  *  @reg_space: The input argumnet into which all the registers are dumped.
5419  *  Description:
5420  *  Dumps the entire register space of xFrame NIC into the user given
5421  *  buffer area.
5422  * Return value :
5423  * void .
5424 */
5425
5426 static void s2io_ethtool_gregs(struct net_device *dev,
5427                                struct ethtool_regs *regs, void *space)
5428 {
5429         int i;
5430         u64 reg;
5431         u8 *reg_space = (u8 *) space;
5432         struct s2io_nic *sp = dev->priv;
5433
5434         regs->len = XENA_REG_SPACE;
5435         regs->version = sp->pdev->subsystem_device;
5436
5437         for (i = 0; i < regs->len; i += 8) {
5438                 reg = readq(sp->bar0 + i);
5439                 memcpy((reg_space + i), &reg, 8);
5440         }
5441 }
5442
5443 /**
5444  *  s2io_phy_id  - timer function that alternates adapter LED.
5445  *  @data : address of the private member of the device structure, which
5446  *  is a pointer to the s2io_nic structure, provided as an u32.
5447  * Description: This is actually the timer function that alternates the
5448  * adapter LED bit of the adapter control bit to set/reset every time on
5449  * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
5450  *  once every second.
5451 */
5452 static void s2io_phy_id(unsigned long data)
5453 {
5454         struct s2io_nic *sp = (struct s2io_nic *) data;
5455         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5456         u64 val64 = 0;
5457         u16 subid;
5458
5459         subid = sp->pdev->subsystem_device;
5460         if ((sp->device_type == XFRAME_II_DEVICE) ||
5461                    ((subid & 0xFF) >= 0x07)) {
5462                 val64 = readq(&bar0->gpio_control);
5463                 val64 ^= GPIO_CTRL_GPIO_0;
5464                 writeq(val64, &bar0->gpio_control);
5465         } else {
5466                 val64 = readq(&bar0->adapter_control);
5467                 val64 ^= ADAPTER_LED_ON;
5468                 writeq(val64, &bar0->adapter_control);
5469         }
5470
5471         mod_timer(&sp->id_timer, jiffies + HZ / 2);
5472 }
5473
5474 /**
5475  * s2io_ethtool_idnic - To physically identify the nic on the system.
5476  * @sp : private member of the device structure, which is a pointer to the
5477  * s2io_nic structure.
5478  * @id : pointer to the structure with identification parameters given by
5479  * ethtool.
5480  * Description: Used to physically identify the NIC on the system.
5481  * The Link LED will blink for a time specified by the user for
5482  * identification.
5483  * NOTE: The Link has to be Up to be able to blink the LED. Hence
5484  * identification is possible only if it's link is up.
5485  * Return value:
5486  * int , returns 0 on success
5487  */
5488
5489 static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
5490 {
5491         u64 val64 = 0, last_gpio_ctrl_val;
5492         struct s2io_nic *sp = dev->priv;
5493         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5494         u16 subid;
5495
5496         subid = sp->pdev->subsystem_device;
5497         last_gpio_ctrl_val = readq(&bar0->gpio_control);
5498         if ((sp->device_type == XFRAME_I_DEVICE) &&
5499                 ((subid & 0xFF) < 0x07)) {
5500                 val64 = readq(&bar0->adapter_control);
5501                 if (!(val64 & ADAPTER_CNTL_EN)) {
5502                         printk(KERN_ERR
5503                                "Adapter Link down, cannot blink LED\n");
5504                         return -EFAULT;
5505                 }
5506         }
5507         if (sp->id_timer.function == NULL) {
5508                 init_timer(&sp->id_timer);
5509                 sp->id_timer.function = s2io_phy_id;
5510                 sp->id_timer.data = (unsigned long) sp;
5511         }
5512         mod_timer(&sp->id_timer, jiffies);
5513         if (data)
5514                 msleep_interruptible(data * HZ);
5515         else
5516                 msleep_interruptible(MAX_FLICKER_TIME);
5517         del_timer_sync(&sp->id_timer);
5518
5519         if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
5520                 writeq(last_gpio_ctrl_val, &bar0->gpio_control);
5521                 last_gpio_ctrl_val = readq(&bar0->gpio_control);
5522         }
5523
5524         return 0;
5525 }
5526
5527 static void s2io_ethtool_gringparam(struct net_device *dev,
5528                                     struct ethtool_ringparam *ering)
5529 {
5530         struct s2io_nic *sp = dev->priv;
5531         int i,tx_desc_count=0,rx_desc_count=0;
5532
5533         if (sp->rxd_mode == RXD_MODE_1)
5534                 ering->rx_max_pending = MAX_RX_DESC_1;
5535         else if (sp->rxd_mode == RXD_MODE_3B)
5536                 ering->rx_max_pending = MAX_RX_DESC_2;
5537
5538         ering->tx_max_pending = MAX_TX_DESC;
5539         for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
5540                 tx_desc_count += sp->config.tx_cfg[i].fifo_len;
5541
5542         DBG_PRINT(INFO_DBG,"\nmax txds : %d\n",sp->config.max_txds);
5543         ering->tx_pending = tx_desc_count;
5544         rx_desc_count = 0;
5545         for (i = 0 ; i < sp->config.rx_ring_num ; i++)
5546                 rx_desc_count += sp->config.rx_cfg[i].num_rxd;
5547
5548         ering->rx_pending = rx_desc_count;
5549
5550         ering->rx_mini_max_pending = 0;
5551         ering->rx_mini_pending = 0;
5552         if(sp->rxd_mode == RXD_MODE_1)
5553                 ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
5554         else if (sp->rxd_mode == RXD_MODE_3B)
5555                 ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
5556         ering->rx_jumbo_pending = rx_desc_count;
5557 }
5558
5559 /**
5560  * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
5561  * @sp : private member of the device structure, which is a pointer to the
5562  *      s2io_nic structure.
5563  * @ep : pointer to the structure with pause parameters given by ethtool.
5564  * Description:
5565  * Returns the Pause frame generation and reception capability of the NIC.
5566  * Return value:
5567  *  void
5568  */
5569 static void s2io_ethtool_getpause_data(struct net_device *dev,
5570                                        struct ethtool_pauseparam *ep)
5571 {
5572         u64 val64;
5573         struct s2io_nic *sp = dev->priv;
5574         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5575
5576         val64 = readq(&bar0->rmac_pause_cfg);
5577         if (val64 & RMAC_PAUSE_GEN_ENABLE)
5578                 ep->tx_pause = TRUE;
5579         if (val64 & RMAC_PAUSE_RX_ENABLE)
5580                 ep->rx_pause = TRUE;
5581         ep->autoneg = FALSE;
5582 }
5583
5584 /**
5585  * s2io_ethtool_setpause_data -  set/reset pause frame generation.
5586  * @sp : private member of the device structure, which is a pointer to the
5587  *      s2io_nic structure.
5588  * @ep : pointer to the structure with pause parameters given by ethtool.
5589  * Description:
5590  * It can be used to set or reset Pause frame generation or reception
5591  * support of the NIC.
5592  * Return value:
5593  * int, returns 0 on Success
5594  */
5595
5596 static int s2io_ethtool_setpause_data(struct net_device *dev,
5597                                struct ethtool_pauseparam *ep)
5598 {
5599         u64 val64;
5600         struct s2io_nic *sp = dev->priv;
5601         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5602
5603         val64 = readq(&bar0->rmac_pause_cfg);
5604         if (ep->tx_pause)
5605                 val64 |= RMAC_PAUSE_GEN_ENABLE;
5606         else
5607                 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
5608         if (ep->rx_pause)
5609                 val64 |= RMAC_PAUSE_RX_ENABLE;
5610         else
5611                 val64 &= ~RMAC_PAUSE_RX_ENABLE;
5612         writeq(val64, &bar0->rmac_pause_cfg);
5613         return 0;
5614 }
5615
5616 /**
5617  * read_eeprom - reads 4 bytes of data from user given offset.
5618  * @sp : private member of the device structure, which is a pointer to the
5619  *      s2io_nic structure.
5620  * @off : offset at which the data must be written
5621  * @data : Its an output parameter where the data read at the given
5622  *      offset is stored.
5623  * Description:
5624  * Will read 4 bytes of data from the user given offset and return the
5625  * read data.
5626  * NOTE: Will allow to read only part of the EEPROM visible through the
5627  *   I2C bus.
5628  * Return value:
5629  *  -1 on failure and 0 on success.
5630  */
5631
5632 #define S2IO_DEV_ID             5
5633 static int read_eeprom(struct s2io_nic * sp, int off, u64 * data)
5634 {
5635         int ret = -1;
5636         u32 exit_cnt = 0;
5637         u64 val64;
5638         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5639
5640         if (sp->device_type == XFRAME_I_DEVICE) {
5641                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5642                     I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
5643                     I2C_CONTROL_CNTL_START;
5644                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5645
5646                 while (exit_cnt < 5) {
5647                         val64 = readq(&bar0->i2c_control);
5648                         if (I2C_CONTROL_CNTL_END(val64)) {
5649                                 *data = I2C_CONTROL_GET_DATA(val64);
5650                                 ret = 0;
5651                                 break;
5652                         }
5653                         msleep(50);
5654                         exit_cnt++;
5655                 }
5656         }
5657
5658         if (sp->device_type == XFRAME_II_DEVICE) {
5659                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5660                         SPI_CONTROL_BYTECNT(0x3) |
5661                         SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
5662                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5663                 val64 |= SPI_CONTROL_REQ;
5664                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5665                 while (exit_cnt < 5) {
5666                         val64 = readq(&bar0->spi_control);
5667                         if (val64 & SPI_CONTROL_NACK) {
5668                                 ret = 1;
5669                                 break;
5670                         } else if (val64 & SPI_CONTROL_DONE) {
5671                                 *data = readq(&bar0->spi_data);
5672                                 *data &= 0xffffff;
5673                                 ret = 0;
5674                                 break;
5675                         }
5676                         msleep(50);
5677                         exit_cnt++;
5678                 }
5679         }
5680         return ret;
5681 }
5682
5683 /**
5684  *  write_eeprom - actually writes the relevant part of the data value.
5685  *  @sp : private member of the device structure, which is a pointer to the
5686  *       s2io_nic structure.
5687  *  @off : offset at which the data must be written
5688  *  @data : The data that is to be written
5689  *  @cnt : Number of bytes of the data that are actually to be written into
5690  *  the Eeprom. (max of 3)
5691  * Description:
5692  *  Actually writes the relevant part of the data value into the Eeprom
5693  *  through the I2C bus.
5694  * Return value:
5695  *  0 on success, -1 on failure.
5696  */
5697
5698 static int write_eeprom(struct s2io_nic * sp, int off, u64 data, int cnt)
5699 {
5700         int exit_cnt = 0, ret = -1;
5701         u64 val64;
5702         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5703
5704         if (sp->device_type == XFRAME_I_DEVICE) {
5705                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5706                     I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
5707                     I2C_CONTROL_CNTL_START;
5708                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5709
5710                 while (exit_cnt < 5) {
5711                         val64 = readq(&bar0->i2c_control);
5712                         if (I2C_CONTROL_CNTL_END(val64)) {
5713                                 if (!(val64 & I2C_CONTROL_NACK))
5714                                         ret = 0;
5715                                 break;
5716                         }
5717                         msleep(50);
5718                         exit_cnt++;
5719                 }
5720         }
5721
5722         if (sp->device_type == XFRAME_II_DEVICE) {
5723                 int write_cnt = (cnt == 8) ? 0 : cnt;
5724                 writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
5725
5726                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5727                         SPI_CONTROL_BYTECNT(write_cnt) |
5728                         SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
5729                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5730                 val64 |= SPI_CONTROL_REQ;
5731                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5732                 while (exit_cnt < 5) {
5733                         val64 = readq(&bar0->spi_control);
5734                         if (val64 & SPI_CONTROL_NACK) {
5735                                 ret = 1;
5736                                 break;
5737                         } else if (val64 & SPI_CONTROL_DONE) {
5738                                 ret = 0;
5739                                 break;
5740                         }
5741                         msleep(50);
5742                         exit_cnt++;
5743                 }
5744         }
5745         return ret;
5746 }
5747 static void s2io_vpd_read(struct s2io_nic *nic)
5748 {
5749         u8 *vpd_data;
5750         u8 data;
5751         int i=0, cnt, fail = 0;
5752         int vpd_addr = 0x80;
5753
5754         if (nic->device_type == XFRAME_II_DEVICE) {
5755                 strcpy(nic->product_name, "Xframe II 10GbE network adapter");
5756                 vpd_addr = 0x80;
5757         }
5758         else {
5759                 strcpy(nic->product_name, "Xframe I 10GbE network adapter");
5760                 vpd_addr = 0x50;
5761         }
5762         strcpy(nic->serial_num, "NOT AVAILABLE");
5763
5764         vpd_data = kmalloc(256, GFP_KERNEL);
5765         if (!vpd_data) {
5766                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
5767                 return;
5768         }
5769         nic->mac_control.stats_info->sw_stat.mem_allocated += 256;
5770
5771         for (i = 0; i < 256; i +=4 ) {
5772                 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
5773                 pci_read_config_byte(nic->pdev,  (vpd_addr + 2), &data);
5774                 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
5775                 for (cnt = 0; cnt <5; cnt++) {
5776                         msleep(2);
5777                         pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
5778                         if (data == 0x80)
5779                                 break;
5780                 }
5781                 if (cnt >= 5) {
5782                         DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
5783                         fail = 1;
5784                         break;
5785                 }
5786                 pci_read_config_dword(nic->pdev,  (vpd_addr + 4),
5787                                       (u32 *)&vpd_data[i]);
5788         }
5789
5790         if(!fail) {
5791                 /* read serial number of adapter */
5792                 for (cnt = 0; cnt < 256; cnt++) {
5793                 if ((vpd_data[cnt] == 'S') &&
5794                         (vpd_data[cnt+1] == 'N') &&
5795                         (vpd_data[cnt+2] < VPD_STRING_LEN)) {
5796                                 memset(nic->serial_num, 0, VPD_STRING_LEN);
5797                                 memcpy(nic->serial_num, &vpd_data[cnt + 3],
5798                                         vpd_data[cnt+2]);
5799                                 break;
5800                         }
5801                 }
5802         }
5803
5804         if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
5805                 memset(nic->product_name, 0, vpd_data[1]);
5806                 memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
5807         }
5808         kfree(vpd_data);
5809         nic->mac_control.stats_info->sw_stat.mem_freed += 256;
5810 }
5811
5812 /**
5813  *  s2io_ethtool_geeprom  - reads the value stored in the Eeprom.
5814  *  @sp : private member of the device structure, which is a pointer to the *       s2io_nic structure.
5815  *  @eeprom : pointer to the user level structure provided by ethtool,
5816  *  containing all relevant information.
5817  *  @data_buf : user defined value to be written into Eeprom.
5818  *  Description: Reads the values stored in the Eeprom at given offset
5819  *  for a given length. Stores these values int the input argument data
5820  *  buffer 'data_buf' and returns these to the caller (ethtool.)
5821  *  Return value:
5822  *  int  0 on success
5823  */
5824
5825 static int s2io_ethtool_geeprom(struct net_device *dev,
5826                          struct ethtool_eeprom *eeprom, u8 * data_buf)
5827 {
5828         u32 i, valid;
5829         u64 data;
5830         struct s2io_nic *sp = dev->priv;
5831
5832         eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
5833
5834         if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
5835                 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
5836
5837         for (i = 0; i < eeprom->len; i += 4) {
5838                 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
5839                         DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
5840                         return -EFAULT;
5841                 }
5842                 valid = INV(data);
5843                 memcpy((data_buf + i), &valid, 4);
5844         }
5845         return 0;
5846 }
5847
5848 /**
5849  *  s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
5850  *  @sp : private member of the device structure, which is a pointer to the
5851  *  s2io_nic structure.
5852  *  @eeprom : pointer to the user level structure provided by ethtool,
5853  *  containing all relevant information.
5854  *  @data_buf ; user defined value to be written into Eeprom.
5855  *  Description:
5856  *  Tries to write the user provided value in the Eeprom, at the offset
5857  *  given by the user.
5858  *  Return value:
5859  *  0 on success, -EFAULT on failure.
5860  */
5861
5862 static int s2io_ethtool_seeprom(struct net_device *dev,
5863                                 struct ethtool_eeprom *eeprom,
5864                                 u8 * data_buf)
5865 {
5866         int len = eeprom->len, cnt = 0;
5867         u64 valid = 0, data;
5868         struct s2io_nic *sp = dev->priv;
5869
5870         if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
5871                 DBG_PRINT(ERR_DBG,
5872                           "ETHTOOL_WRITE_EEPROM Err: Magic value ");
5873                 DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
5874                           eeprom->magic);
5875                 return -EFAULT;
5876         }
5877
5878         while (len) {
5879                 data = (u32) data_buf[cnt] & 0x000000FF;
5880                 if (data) {
5881                         valid = (u32) (data << 24);
5882                 } else
5883                         valid = data;
5884
5885                 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
5886                         DBG_PRINT(ERR_DBG,
5887                                   "ETHTOOL_WRITE_EEPROM Err: Cannot ");
5888                         DBG_PRINT(ERR_DBG,
5889                                   "write into the specified offset\n");
5890                         return -EFAULT;
5891                 }
5892                 cnt++;
5893                 len--;
5894         }
5895
5896         return 0;
5897 }
5898
5899 /**
5900  * s2io_register_test - reads and writes into all clock domains.
5901  * @sp : private member of the device structure, which is a pointer to the
5902  * s2io_nic structure.
5903  * @data : variable that returns the result of each of the test conducted b
5904  * by the driver.
5905  * Description:
5906  * Read and write into all clock domains. The NIC has 3 clock domains,
5907  * see that registers in all the three regions are accessible.
5908  * Return value:
5909  * 0 on success.
5910  */
5911
5912 static int s2io_register_test(struct s2io_nic * sp, uint64_t * data)
5913 {
5914         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5915         u64 val64 = 0, exp_val;
5916         int fail = 0;
5917
5918         val64 = readq(&bar0->pif_rd_swapper_fb);
5919         if (val64 != 0x123456789abcdefULL) {
5920                 fail = 1;
5921                 DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
5922         }
5923
5924         val64 = readq(&bar0->rmac_pause_cfg);
5925         if (val64 != 0xc000ffff00000000ULL) {
5926                 fail = 1;
5927                 DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
5928         }
5929
5930         val64 = readq(&bar0->rx_queue_cfg);
5931         if (sp->device_type == XFRAME_II_DEVICE)
5932                 exp_val = 0x0404040404040404ULL;
5933         else
5934                 exp_val = 0x0808080808080808ULL;
5935         if (val64 != exp_val) {
5936                 fail = 1;
5937                 DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
5938         }
5939
5940         val64 = readq(&bar0->xgxs_efifo_cfg);
5941         if (val64 != 0x000000001923141EULL) {
5942                 fail = 1;
5943                 DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
5944         }
5945
5946         val64 = 0x5A5A5A5A5A5A5A5AULL;
5947         writeq(val64, &bar0->xmsi_data);
5948         val64 = readq(&bar0->xmsi_data);
5949         if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
5950                 fail = 1;
5951                 DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
5952         }
5953
5954         val64 = 0xA5A5A5A5A5A5A5A5ULL;
5955         writeq(val64, &bar0->xmsi_data);
5956         val64 = readq(&bar0->xmsi_data);
5957         if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
5958                 fail = 1;
5959                 DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
5960         }
5961
5962         *data = fail;
5963         return fail;
5964 }
5965
5966 /**
5967  * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5968  * @sp : private member of the device structure, which is a pointer to the
5969  * s2io_nic structure.
5970  * @data:variable that returns the result of each of the test conducted by
5971  * the driver.
5972  * Description:
5973  * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5974  * register.
5975  * Return value:
5976  * 0 on success.
5977  */
5978
5979 static int s2io_eeprom_test(struct s2io_nic * sp, uint64_t * data)
5980 {
5981         int fail = 0;
5982         u64 ret_data, org_4F0, org_7F0;
5983         u8 saved_4F0 = 0, saved_7F0 = 0;
5984         struct net_device *dev = sp->dev;
5985
5986         /* Test Write Error at offset 0 */
5987         /* Note that SPI interface allows write access to all areas
5988          * of EEPROM. Hence doing all negative testing only for Xframe I.
5989          */
5990         if (sp->device_type == XFRAME_I_DEVICE)
5991                 if (!write_eeprom(sp, 0, 0, 3))
5992                         fail = 1;
5993
5994         /* Save current values at offsets 0x4F0 and 0x7F0 */
5995         if (!read_eeprom(sp, 0x4F0, &org_4F0))
5996                 saved_4F0 = 1;
5997         if (!read_eeprom(sp, 0x7F0, &org_7F0))
5998                 saved_7F0 = 1;
5999
6000         /* Test Write at offset 4f0 */
6001         if (write_eeprom(sp, 0x4F0, 0x012345, 3))
6002                 fail = 1;
6003         if (read_eeprom(sp, 0x4F0, &ret_data))
6004                 fail = 1;
6005
6006         if (ret_data != 0x012345) {
6007                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
6008                         "Data written %llx Data read %llx\n",
6009                         dev->name, (unsigned long long)0x12345,
6010                         (unsigned long long)ret_data);
6011                 fail = 1;
6012         }
6013
6014         /* Reset the EEPROM data go FFFF */
6015         write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
6016
6017         /* Test Write Request Error at offset 0x7c */
6018         if (sp->device_type == XFRAME_I_DEVICE)
6019                 if (!write_eeprom(sp, 0x07C, 0, 3))
6020                         fail = 1;
6021
6022         /* Test Write Request at offset 0x7f0 */
6023         if (write_eeprom(sp, 0x7F0, 0x012345, 3))
6024                 fail = 1;
6025         if (read_eeprom(sp, 0x7F0, &ret_data))
6026                 fail = 1;
6027
6028         if (ret_data != 0x012345) {
6029                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
6030                         "Data written %llx Data read %llx\n",
6031                         dev->name, (unsigned long long)0x12345,
6032                         (unsigned long long)ret_data);
6033                 fail = 1;
6034         }
6035
6036         /* Reset the EEPROM data go FFFF */
6037         write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
6038
6039         if (sp->device_type == XFRAME_I_DEVICE) {
6040                 /* Test Write Error at offset 0x80 */
6041                 if (!write_eeprom(sp, 0x080, 0, 3))
6042                         fail = 1;
6043
6044                 /* Test Write Error at offset 0xfc */
6045                 if (!write_eeprom(sp, 0x0FC, 0, 3))
6046                         fail = 1;
6047
6048                 /* Test Write Error at offset 0x100 */
6049                 if (!write_eeprom(sp, 0x100, 0, 3))
6050                         fail = 1;
6051
6052                 /* Test Write Error at offset 4ec */
6053                 if (!write_eeprom(sp, 0x4EC, 0, 3))
6054                         fail = 1;
6055         }
6056
6057         /* Restore values at offsets 0x4F0 and 0x7F0 */
6058         if (saved_4F0)
6059                 write_eeprom(sp, 0x4F0, org_4F0, 3);
6060         if (saved_7F0)
6061                 write_eeprom(sp, 0x7F0, org_7F0, 3);
6062
6063         *data = fail;
6064         return fail;
6065 }
6066
6067 /**
6068  * s2io_bist_test - invokes the MemBist test of the card .
6069  * @sp : private member of the device structure, which is a pointer to the
6070  * s2io_nic structure.
6071  * @data:variable that returns the result of each of the test conducted by
6072  * the driver.
6073  * Description:
6074  * This invokes the MemBist test of the card. We give around
6075  * 2 secs time for the Test to complete. If it's still not complete
6076  * within this peiod, we consider that the test failed.
6077  * Return value:
6078  * 0 on success and -1 on failure.
6079  */
6080
6081 static int s2io_bist_test(struct s2io_nic * sp, uint64_t * data)
6082 {
6083         u8 bist = 0;
6084         int cnt = 0, ret = -1;
6085
6086         pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6087         bist |= PCI_BIST_START;
6088         pci_write_config_word(sp->pdev, PCI_BIST, bist);
6089
6090         while (cnt < 20) {
6091                 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6092                 if (!(bist & PCI_BIST_START)) {
6093                         *data = (bist & PCI_BIST_CODE_MASK);
6094                         ret = 0;
6095                         break;
6096                 }
6097                 msleep(100);
6098                 cnt++;
6099         }
6100
6101         return ret;
6102 }
6103
6104 /**
6105  * s2io-link_test - verifies the link state of the nic
6106  * @sp ; private member of the device structure, which is a pointer to the
6107  * s2io_nic structure.
6108  * @data: variable that returns the result of each of the test conducted by
6109  * the driver.
6110  * Description:
6111  * The function verifies the link state of the NIC and updates the input
6112  * argument 'data' appropriately.
6113  * Return value:
6114  * 0 on success.
6115  */
6116
6117 static int s2io_link_test(struct s2io_nic * sp, uint64_t * data)
6118 {
6119         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6120         u64 val64;
6121
6122         val64 = readq(&bar0->adapter_status);
6123         if(!(LINK_IS_UP(val64)))
6124                 *data = 1;
6125         else
6126                 *data = 0;
6127
6128         return *data;
6129 }
6130
6131 /**
6132  * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
6133  * @sp - private member of the device structure, which is a pointer to the
6134  * s2io_nic structure.
6135  * @data - variable that returns the result of each of the test
6136  * conducted by the driver.
6137  * Description:
6138  *  This is one of the offline test that tests the read and write
6139  *  access to the RldRam chip on the NIC.
6140  * Return value:
6141  *  0 on success.
6142  */
6143
6144 static int s2io_rldram_test(struct s2io_nic * sp, uint64_t * data)
6145 {
6146         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6147         u64 val64;
6148         int cnt, iteration = 0, test_fail = 0;
6149
6150         val64 = readq(&bar0->adapter_control);
6151         val64 &= ~ADAPTER_ECC_EN;
6152         writeq(val64, &bar0->adapter_control);
6153
6154         val64 = readq(&bar0->mc_rldram_test_ctrl);
6155         val64 |= MC_RLDRAM_TEST_MODE;
6156         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6157
6158         val64 = readq(&bar0->mc_rldram_mrs);
6159         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
6160         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6161
6162         val64 |= MC_RLDRAM_MRS_ENABLE;
6163         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6164
6165         while (iteration < 2) {
6166                 val64 = 0x55555555aaaa0000ULL;
6167                 if (iteration == 1) {
6168                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6169                 }
6170                 writeq(val64, &bar0->mc_rldram_test_d0);
6171
6172                 val64 = 0xaaaa5a5555550000ULL;
6173                 if (iteration == 1) {
6174                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6175                 }
6176                 writeq(val64, &bar0->mc_rldram_test_d1);
6177
6178                 val64 = 0x55aaaaaaaa5a0000ULL;
6179                 if (iteration == 1) {
6180                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6181                 }
6182                 writeq(val64, &bar0->mc_rldram_test_d2);
6183
6184                 val64 = (u64) (0x0000003ffffe0100ULL);
6185                 writeq(val64, &bar0->mc_rldram_test_add);
6186
6187                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
6188                         MC_RLDRAM_TEST_GO;
6189                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6190
6191                 for (cnt = 0; cnt < 5; cnt++) {
6192                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6193                         if (val64 & MC_RLDRAM_TEST_DONE)
6194                                 break;
6195                         msleep(200);
6196                 }
6197
6198                 if (cnt == 5)
6199                         break;
6200
6201                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
6202                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6203
6204                 for (cnt = 0; cnt < 5; cnt++) {
6205                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6206                         if (val64 & MC_RLDRAM_TEST_DONE)
6207                                 break;
6208                         msleep(500);
6209                 }
6210
6211                 if (cnt == 5)
6212                         break;
6213
6214                 val64 = readq(&bar0->mc_rldram_test_ctrl);
6215                 if (!(val64 & MC_RLDRAM_TEST_PASS))
6216                         test_fail = 1;
6217
6218                 iteration++;
6219         }
6220
6221         *data = test_fail;
6222
6223         /* Bring the adapter out of test mode */
6224         SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
6225
6226         return test_fail;
6227 }
6228
6229 /**
6230  *  s2io_ethtool_test - conducts 6 tsets to determine the health of card.
6231  *  @sp : private member of the device structure, which is a pointer to the
6232  *  s2io_nic structure.
6233  *  @ethtest : pointer to a ethtool command specific structure that will be
6234  *  returned to the user.
6235  *  @data : variable that returns the result of each of the test
6236  * conducted by the driver.
6237  * Description:
6238  *  This function conducts 6 tests ( 4 offline and 2 online) to determine
6239  *  the health of the card.
6240  * Return value:
6241  *  void
6242  */
6243
6244 static void s2io_ethtool_test(struct net_device *dev,
6245                               struct ethtool_test *ethtest,
6246                               uint64_t * data)
6247 {
6248         struct s2io_nic *sp = dev->priv;
6249         int orig_state = netif_running(sp->dev);
6250
6251         if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
6252                 /* Offline Tests. */
6253                 if (orig_state)
6254                         s2io_close(sp->dev);
6255
6256                 if (s2io_register_test(sp, &data[0]))
6257                         ethtest->flags |= ETH_TEST_FL_FAILED;
6258
6259                 s2io_reset(sp);
6260
6261                 if (s2io_rldram_test(sp, &data[3]))
6262                         ethtest->flags |= ETH_TEST_FL_FAILED;
6263
6264                 s2io_reset(sp);
6265
6266                 if (s2io_eeprom_test(sp, &data[1]))
6267                         ethtest->flags |= ETH_TEST_FL_FAILED;
6268
6269                 if (s2io_bist_test(sp, &data[4]))
6270                         ethtest->flags |= ETH_TEST_FL_FAILED;
6271
6272                 if (orig_state)
6273                         s2io_open(sp->dev);
6274
6275                 data[2] = 0;
6276         } else {
6277                 /* Online Tests. */
6278                 if (!orig_state) {
6279                         DBG_PRINT(ERR_DBG,
6280                                   "%s: is not up, cannot run test\n",
6281                                   dev->name);
6282                         data[0] = -1;
6283                         data[1] = -1;
6284                         data[2] = -1;
6285                         data[3] = -1;
6286                         data[4] = -1;
6287                 }
6288
6289                 if (s2io_link_test(sp, &data[2]))
6290                         ethtest->flags |= ETH_TEST_FL_FAILED;
6291
6292                 data[0] = 0;
6293                 data[1] = 0;
6294                 data[3] = 0;
6295                 data[4] = 0;
6296         }
6297 }
6298
6299 static void s2io_get_ethtool_stats(struct net_device *dev,
6300                                    struct ethtool_stats *estats,
6301                                    u64 * tmp_stats)
6302 {
6303         int i = 0, k;
6304         struct s2io_nic *sp = dev->priv;
6305         struct stat_block *stat_info = sp->mac_control.stats_info;
6306
6307         s2io_updt_stats(sp);
6308         tmp_stats[i++] =
6309                 (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32  |
6310                 le32_to_cpu(stat_info->tmac_frms);
6311         tmp_stats[i++] =
6312                 (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
6313                 le32_to_cpu(stat_info->tmac_data_octets);
6314         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
6315         tmp_stats[i++] =
6316                 (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
6317                 le32_to_cpu(stat_info->tmac_mcst_frms);
6318         tmp_stats[i++] =
6319                 (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
6320                 le32_to_cpu(stat_info->tmac_bcst_frms);
6321         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
6322         tmp_stats[i++] =
6323                 (u64)le32_to_cpu(stat_info->tmac_ttl_octets_oflow) << 32 |
6324                 le32_to_cpu(stat_info->tmac_ttl_octets);
6325         tmp_stats[i++] =
6326                 (u64)le32_to_cpu(stat_info->tmac_ucst_frms_oflow) << 32 |
6327                 le32_to_cpu(stat_info->tmac_ucst_frms);
6328         tmp_stats[i++] =
6329                 (u64)le32_to_cpu(stat_info->tmac_nucst_frms_oflow) << 32 |
6330                 le32_to_cpu(stat_info->tmac_nucst_frms);
6331         tmp_stats[i++] =
6332                 (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
6333                 le32_to_cpu(stat_info->tmac_any_err_frms);
6334         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_ttl_less_fb_octets);
6335         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
6336         tmp_stats[i++] =
6337                 (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
6338                 le32_to_cpu(stat_info->tmac_vld_ip);
6339         tmp_stats[i++] =
6340                 (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
6341                 le32_to_cpu(stat_info->tmac_drop_ip);
6342         tmp_stats[i++] =
6343                 (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
6344                 le32_to_cpu(stat_info->tmac_icmp);
6345         tmp_stats[i++] =
6346                 (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
6347                 le32_to_cpu(stat_info->tmac_rst_tcp);
6348         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
6349         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
6350                 le32_to_cpu(stat_info->tmac_udp);
6351         tmp_stats[i++] =
6352                 (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
6353                 le32_to_cpu(stat_info->rmac_vld_frms);
6354         tmp_stats[i++] =
6355                 (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
6356                 le32_to_cpu(stat_info->rmac_data_octets);
6357         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
6358         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
6359         tmp_stats[i++] =
6360                 (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
6361                 le32_to_cpu(stat_info->rmac_vld_mcst_frms);
6362         tmp_stats[i++] =
6363                 (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
6364                 le32_to_cpu(stat_info->rmac_vld_bcst_frms);
6365         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
6366         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_out_rng_len_err_frms);
6367         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
6368         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
6369         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_unsup_ctrl_frms);
6370         tmp_stats[i++] =
6371                 (u64)le32_to_cpu(stat_info->rmac_ttl_octets_oflow) << 32 |
6372                 le32_to_cpu(stat_info->rmac_ttl_octets);
6373         tmp_stats[i++] =
6374                 (u64)le32_to_cpu(stat_info->rmac_accepted_ucst_frms_oflow)
6375                 << 32 | le32_to_cpu(stat_info->rmac_accepted_ucst_frms);
6376         tmp_stats[i++] =
6377                 (u64)le32_to_cpu(stat_info->rmac_accepted_nucst_frms_oflow)
6378                  << 32 | le32_to_cpu(stat_info->rmac_accepted_nucst_frms);
6379         tmp_stats[i++] =
6380                 (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
6381                 le32_to_cpu(stat_info->rmac_discarded_frms);
6382         tmp_stats[i++] =
6383                 (u64)le32_to_cpu(stat_info->rmac_drop_events_oflow)
6384                  << 32 | le32_to_cpu(stat_info->rmac_drop_events);
6385         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_less_fb_octets);
6386         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_frms);
6387         tmp_stats[i++] =
6388                 (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
6389                 le32_to_cpu(stat_info->rmac_usized_frms);
6390         tmp_stats[i++] =
6391                 (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
6392                 le32_to_cpu(stat_info->rmac_osized_frms);
6393         tmp_stats[i++] =
6394                 (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
6395                 le32_to_cpu(stat_info->rmac_frag_frms);
6396         tmp_stats[i++] =
6397                 (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
6398                 le32_to_cpu(stat_info->rmac_jabber_frms);
6399         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_64_frms);
6400         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_65_127_frms);
6401         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_128_255_frms);
6402         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_256_511_frms);
6403         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_512_1023_frms);
6404         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_1024_1518_frms);
6405         tmp_stats[i++] =
6406                 (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
6407                 le32_to_cpu(stat_info->rmac_ip);
6408         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
6409         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
6410         tmp_stats[i++] =
6411                 (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
6412                 le32_to_cpu(stat_info->rmac_drop_ip);
6413         tmp_stats[i++] =
6414                 (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
6415                 le32_to_cpu(stat_info->rmac_icmp);
6416         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
6417         tmp_stats[i++] =
6418                 (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
6419                 le32_to_cpu(stat_info->rmac_udp);
6420         tmp_stats[i++] =
6421                 (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
6422                 le32_to_cpu(stat_info->rmac_err_drp_udp);
6423         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_err_sym);
6424         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q0);
6425         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q1);
6426         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q2);
6427         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q3);
6428         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q4);
6429         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q5);
6430         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q6);
6431         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q7);
6432         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q0);
6433         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q1);
6434         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q2);
6435         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q3);
6436         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q4);
6437         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q5);
6438         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q6);
6439         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q7);
6440         tmp_stats[i++] =
6441                 (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
6442                 le32_to_cpu(stat_info->rmac_pause_cnt);
6443         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_data_err_cnt);
6444         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_ctrl_err_cnt);
6445         tmp_stats[i++] =
6446                 (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
6447                 le32_to_cpu(stat_info->rmac_accepted_ip);
6448         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
6449         tmp_stats[i++] = le32_to_cpu(stat_info->rd_req_cnt);
6450         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_cnt);
6451         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_rtry_cnt);
6452         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_cnt);
6453         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_rd_ack_cnt);
6454         tmp_stats[i++] = le32_to_cpu(stat_info->wr_req_cnt);
6455         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_cnt);
6456         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_rtry_cnt);
6457         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_cnt);
6458         tmp_stats[i++] = le32_to_cpu(stat_info->wr_disc_cnt);
6459         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_wr_ack_cnt);
6460         tmp_stats[i++] = le32_to_cpu(stat_info->txp_wr_cnt);
6461         tmp_stats[i++] = le32_to_cpu(stat_info->txd_rd_cnt);
6462         tmp_stats[i++] = le32_to_cpu(stat_info->txd_wr_cnt);
6463         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_rd_cnt);
6464         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_wr_cnt);
6465         tmp_stats[i++] = le32_to_cpu(stat_info->txf_rd_cnt);
6466         tmp_stats[i++] = le32_to_cpu(stat_info->rxf_wr_cnt);
6467
6468         /* Enhanced statistics exist only for Hercules */
6469         if(sp->device_type == XFRAME_II_DEVICE) {
6470                 tmp_stats[i++] =
6471                                 le64_to_cpu(stat_info->rmac_ttl_1519_4095_frms);
6472                 tmp_stats[i++] =
6473                                 le64_to_cpu(stat_info->rmac_ttl_4096_8191_frms);
6474                 tmp_stats[i++] =
6475                                 le64_to_cpu(stat_info->rmac_ttl_8192_max_frms);
6476                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_gt_max_frms);
6477                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_osized_alt_frms);
6478                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_jabber_alt_frms);
6479                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_gt_max_alt_frms);
6480                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_vlan_frms);
6481                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_len_discard);
6482                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_fcs_discard);
6483                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pf_discard);
6484                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_da_discard);
6485                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_red_discard);
6486                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_rts_discard);
6487                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ingm_full_discard);
6488                 tmp_stats[i++] = le32_to_cpu(stat_info->link_fault_cnt);
6489         }
6490
6491         tmp_stats[i++] = 0;
6492         tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
6493         tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
6494         tmp_stats[i++] = stat_info->sw_stat.parity_err_cnt;
6495         tmp_stats[i++] = stat_info->sw_stat.serious_err_cnt;
6496         tmp_stats[i++] = stat_info->sw_stat.soft_reset_cnt;
6497         tmp_stats[i++] = stat_info->sw_stat.fifo_full_cnt;
6498         for (k = 0; k < MAX_RX_RINGS; k++)
6499                 tmp_stats[i++] = stat_info->sw_stat.ring_full_cnt[k];
6500         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_high;
6501         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_low;
6502         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_high;
6503         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_low;
6504         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_high;
6505         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_low;
6506         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_high;
6507         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_low;
6508         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_high;
6509         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_low;
6510         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_high;
6511         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_low;
6512         tmp_stats[i++] = stat_info->sw_stat.clubbed_frms_cnt;
6513         tmp_stats[i++] = stat_info->sw_stat.sending_both;
6514         tmp_stats[i++] = stat_info->sw_stat.outof_sequence_pkts;
6515         tmp_stats[i++] = stat_info->sw_stat.flush_max_pkts;
6516         if (stat_info->sw_stat.num_aggregations) {
6517                 u64 tmp = stat_info->sw_stat.sum_avg_pkts_aggregated;
6518                 int count = 0;
6519                 /*
6520                  * Since 64-bit divide does not work on all platforms,
6521                  * do repeated subtraction.
6522                  */
6523                 while (tmp >= stat_info->sw_stat.num_aggregations) {
6524                         tmp -= stat_info->sw_stat.num_aggregations;
6525                         count++;
6526                 }
6527                 tmp_stats[i++] = count;
6528         }
6529         else
6530                 tmp_stats[i++] = 0;
6531         tmp_stats[i++] = stat_info->sw_stat.mem_alloc_fail_cnt;
6532         tmp_stats[i++] = stat_info->sw_stat.pci_map_fail_cnt;
6533         tmp_stats[i++] = stat_info->sw_stat.watchdog_timer_cnt;
6534         tmp_stats[i++] = stat_info->sw_stat.mem_allocated;
6535         tmp_stats[i++] = stat_info->sw_stat.mem_freed;
6536         tmp_stats[i++] = stat_info->sw_stat.link_up_cnt;
6537         tmp_stats[i++] = stat_info->sw_stat.link_down_cnt;
6538         tmp_stats[i++] = stat_info->sw_stat.link_up_time;
6539         tmp_stats[i++] = stat_info->sw_stat.link_down_time;
6540
6541         tmp_stats[i++] = stat_info->sw_stat.tx_buf_abort_cnt;
6542         tmp_stats[i++] = stat_info->sw_stat.tx_desc_abort_cnt;
6543         tmp_stats[i++] = stat_info->sw_stat.tx_parity_err_cnt;
6544         tmp_stats[i++] = stat_info->sw_stat.tx_link_loss_cnt;
6545         tmp_stats[i++] = stat_info->sw_stat.tx_list_proc_err_cnt;
6546
6547         tmp_stats[i++] = stat_info->sw_stat.rx_parity_err_cnt;
6548         tmp_stats[i++] = stat_info->sw_stat.rx_abort_cnt;
6549         tmp_stats[i++] = stat_info->sw_stat.rx_parity_abort_cnt;
6550         tmp_stats[i++] = stat_info->sw_stat.rx_rda_fail_cnt;
6551         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_prot_cnt;
6552         tmp_stats[i++] = stat_info->sw_stat.rx_fcs_err_cnt;
6553         tmp_stats[i++] = stat_info->sw_stat.rx_buf_size_err_cnt;
6554         tmp_stats[i++] = stat_info->sw_stat.rx_rxd_corrupt_cnt;
6555         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_err_cnt;
6556         tmp_stats[i++] = stat_info->sw_stat.tda_err_cnt;
6557         tmp_stats[i++] = stat_info->sw_stat.pfc_err_cnt;
6558         tmp_stats[i++] = stat_info->sw_stat.pcc_err_cnt;
6559         tmp_stats[i++] = stat_info->sw_stat.tti_err_cnt;
6560         tmp_stats[i++] = stat_info->sw_stat.tpa_err_cnt;
6561         tmp_stats[i++] = stat_info->sw_stat.sm_err_cnt;
6562         tmp_stats[i++] = stat_info->sw_stat.lso_err_cnt;
6563         tmp_stats[i++] = stat_info->sw_stat.mac_tmac_err_cnt;
6564         tmp_stats[i++] = stat_info->sw_stat.mac_rmac_err_cnt;
6565         tmp_stats[i++] = stat_info->sw_stat.xgxs_txgxs_err_cnt;
6566         tmp_stats[i++] = stat_info->sw_stat.xgxs_rxgxs_err_cnt;
6567         tmp_stats[i++] = stat_info->sw_stat.rc_err_cnt;
6568         tmp_stats[i++] = stat_info->sw_stat.prc_pcix_err_cnt;
6569         tmp_stats[i++] = stat_info->sw_stat.rpa_err_cnt;
6570         tmp_stats[i++] = stat_info->sw_stat.rda_err_cnt;
6571         tmp_stats[i++] = stat_info->sw_stat.rti_err_cnt;
6572         tmp_stats[i++] = stat_info->sw_stat.mc_err_cnt;
6573 }
6574
6575 static int s2io_ethtool_get_regs_len(struct net_device *dev)
6576 {
6577         return (XENA_REG_SPACE);
6578 }
6579
6580
6581 static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
6582 {
6583         struct s2io_nic *sp = dev->priv;
6584
6585         return (sp->rx_csum);
6586 }
6587
6588 static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
6589 {
6590         struct s2io_nic *sp = dev->priv;
6591
6592         if (data)
6593                 sp->rx_csum = 1;
6594         else
6595                 sp->rx_csum = 0;
6596
6597         return 0;
6598 }
6599
6600 static int s2io_get_eeprom_len(struct net_device *dev)
6601 {
6602         return (XENA_EEPROM_SPACE);
6603 }
6604
6605 static int s2io_get_sset_count(struct net_device *dev, int sset)
6606 {
6607         struct s2io_nic *sp = dev->priv;
6608
6609         switch (sset) {
6610         case ETH_SS_TEST:
6611                 return S2IO_TEST_LEN;
6612         case ETH_SS_STATS:
6613                 switch(sp->device_type) {
6614                 case XFRAME_I_DEVICE:
6615                         return XFRAME_I_STAT_LEN;
6616                 case XFRAME_II_DEVICE:
6617                         return XFRAME_II_STAT_LEN;
6618                 default:
6619                         return 0;
6620                 }
6621         default:
6622                 return -EOPNOTSUPP;
6623         }
6624 }
6625
6626 static void s2io_ethtool_get_strings(struct net_device *dev,
6627                                      u32 stringset, u8 * data)
6628 {
6629         int stat_size = 0;
6630         struct s2io_nic *sp = dev->priv;
6631
6632         switch (stringset) {
6633         case ETH_SS_TEST:
6634                 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
6635                 break;
6636         case ETH_SS_STATS:
6637                 stat_size = sizeof(ethtool_xena_stats_keys);
6638                 memcpy(data, &ethtool_xena_stats_keys,stat_size);
6639                 if(sp->device_type == XFRAME_II_DEVICE) {
6640                         memcpy(data + stat_size,
6641                                 &ethtool_enhanced_stats_keys,
6642                                 sizeof(ethtool_enhanced_stats_keys));
6643                         stat_size += sizeof(ethtool_enhanced_stats_keys);
6644                 }
6645
6646                 memcpy(data + stat_size, &ethtool_driver_stats_keys,
6647                         sizeof(ethtool_driver_stats_keys));
6648         }
6649 }
6650
6651 static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
6652 {
6653         if (data)
6654                 dev->features |= NETIF_F_IP_CSUM;
6655         else
6656                 dev->features &= ~NETIF_F_IP_CSUM;
6657
6658         return 0;
6659 }
6660
6661 static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
6662 {
6663         return (dev->features & NETIF_F_TSO) != 0;
6664 }
6665 static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
6666 {
6667         if (data)
6668                 dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
6669         else
6670                 dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
6671
6672         return 0;
6673 }
6674
6675 static const struct ethtool_ops netdev_ethtool_ops = {
6676         .get_settings = s2io_ethtool_gset,
6677         .set_settings = s2io_ethtool_sset,
6678         .get_drvinfo = s2io_ethtool_gdrvinfo,
6679         .get_regs_len = s2io_ethtool_get_regs_len,
6680         .get_regs = s2io_ethtool_gregs,
6681         .get_link = ethtool_op_get_link,
6682         .get_eeprom_len = s2io_get_eeprom_len,
6683         .get_eeprom = s2io_ethtool_geeprom,
6684         .set_eeprom = s2io_ethtool_seeprom,
6685         .get_ringparam = s2io_ethtool_gringparam,
6686         .get_pauseparam = s2io_ethtool_getpause_data,
6687         .set_pauseparam = s2io_ethtool_setpause_data,
6688         .get_rx_csum = s2io_ethtool_get_rx_csum,
6689         .set_rx_csum = s2io_ethtool_set_rx_csum,
6690         .set_tx_csum = s2io_ethtool_op_set_tx_csum,
6691         .set_sg = ethtool_op_set_sg,
6692         .get_tso = s2io_ethtool_op_get_tso,
6693         .set_tso = s2io_ethtool_op_set_tso,
6694         .set_ufo = ethtool_op_set_ufo,
6695         .self_test = s2io_ethtool_test,
6696         .get_strings = s2io_ethtool_get_strings,
6697         .phys_id = s2io_ethtool_idnic,
6698         .get_ethtool_stats = s2io_get_ethtool_stats,
6699         .get_sset_count = s2io_get_sset_count,
6700 };
6701
6702 /**
6703  *  s2io_ioctl - Entry point for the Ioctl
6704  *  @dev :  Device pointer.
6705  *  @ifr :  An IOCTL specefic structure, that can contain a pointer to
6706  *  a proprietary structure used to pass information to the driver.
6707  *  @cmd :  This is used to distinguish between the different commands that
6708  *  can be passed to the IOCTL functions.
6709  *  Description:
6710  *  Currently there are no special functionality supported in IOCTL, hence
6711  *  function always return EOPNOTSUPPORTED
6712  */
6713
6714 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6715 {
6716         return -EOPNOTSUPP;
6717 }
6718
6719 /**
6720  *  s2io_change_mtu - entry point to change MTU size for the device.
6721  *   @dev : device pointer.
6722  *   @new_mtu : the new MTU size for the device.
6723  *   Description: A driver entry point to change MTU size for the device.
6724  *   Before changing the MTU the device must be stopped.
6725  *  Return value:
6726  *   0 on success and an appropriate (-)ve integer as defined in errno.h
6727  *   file on failure.
6728  */
6729
6730 static int s2io_change_mtu(struct net_device *dev, int new_mtu)
6731 {
6732         struct s2io_nic *sp = dev->priv;
6733         int ret = 0;
6734
6735         if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
6736                 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
6737                           dev->name);
6738                 return -EPERM;
6739         }
6740
6741         dev->mtu = new_mtu;
6742         if (netif_running(dev)) {
6743                 s2io_stop_all_tx_queue(sp);
6744                 s2io_card_down(sp);
6745                 ret = s2io_card_up(sp);
6746                 if (ret) {
6747                         DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6748                                   __FUNCTION__);
6749                         return ret;
6750                 }
6751                 s2io_wake_all_tx_queue(sp);
6752         } else { /* Device is down */
6753                 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6754                 u64 val64 = new_mtu;
6755
6756                 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
6757         }
6758
6759         return ret;
6760 }
6761
6762 /**
6763  * s2io_set_link - Set the LInk status
6764  * @data: long pointer to device private structue
6765  * Description: Sets the link status for the adapter
6766  */
6767
6768 static void s2io_set_link(struct work_struct *work)
6769 {
6770         struct s2io_nic *nic = container_of(work, struct s2io_nic, set_link_task);
6771         struct net_device *dev = nic->dev;
6772         struct XENA_dev_config __iomem *bar0 = nic->bar0;
6773         register u64 val64;
6774         u16 subid;
6775
6776         rtnl_lock();
6777
6778         if (!netif_running(dev))
6779                 goto out_unlock;
6780
6781         if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) {
6782                 /* The card is being reset, no point doing anything */
6783                 goto out_unlock;
6784         }
6785
6786         subid = nic->pdev->subsystem_device;
6787         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
6788                 /*
6789                  * Allow a small delay for the NICs self initiated
6790                  * cleanup to complete.
6791                  */
6792                 msleep(100);
6793         }
6794
6795         val64 = readq(&bar0->adapter_status);
6796         if (LINK_IS_UP(val64)) {
6797                 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
6798                         if (verify_xena_quiescence(nic)) {
6799                                 val64 = readq(&bar0->adapter_control);
6800                                 val64 |= ADAPTER_CNTL_EN;
6801                                 writeq(val64, &bar0->adapter_control);
6802                                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(
6803                                         nic->device_type, subid)) {
6804                                         val64 = readq(&bar0->gpio_control);
6805                                         val64 |= GPIO_CTRL_GPIO_0;
6806                                         writeq(val64, &bar0->gpio_control);
6807                                         val64 = readq(&bar0->gpio_control);
6808                                 } else {
6809                                         val64 |= ADAPTER_LED_ON;
6810                                         writeq(val64, &bar0->adapter_control);
6811                                 }
6812                                 nic->device_enabled_once = TRUE;
6813                         } else {
6814                                 DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
6815                                 DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
6816                                 s2io_stop_all_tx_queue(nic);
6817                         }
6818                 }
6819                 val64 = readq(&bar0->adapter_control);
6820                 val64 |= ADAPTER_LED_ON;
6821                 writeq(val64, &bar0->adapter_control);
6822                 s2io_link(nic, LINK_UP);
6823         } else {
6824                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
6825                                                       subid)) {
6826                         val64 = readq(&bar0->gpio_control);
6827                         val64 &= ~GPIO_CTRL_GPIO_0;
6828                         writeq(val64, &bar0->gpio_control);
6829                         val64 = readq(&bar0->gpio_control);
6830                 }
6831                 /* turn off LED */
6832                 val64 = readq(&bar0->adapter_control);
6833                 val64 = val64 &(~ADAPTER_LED_ON);
6834                 writeq(val64, &bar0->adapter_control);
6835                 s2io_link(nic, LINK_DOWN);
6836         }
6837         clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state));
6838
6839 out_unlock:
6840         rtnl_unlock();
6841 }
6842
6843 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
6844                                 struct buffAdd *ba,
6845                                 struct sk_buff **skb, u64 *temp0, u64 *temp1,
6846                                 u64 *temp2, int size)
6847 {
6848         struct net_device *dev = sp->dev;
6849         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
6850
6851         if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
6852                 struct RxD1 *rxdp1 = (struct RxD1 *)rxdp;
6853                 /* allocate skb */
6854                 if (*skb) {
6855                         DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
6856                         /*
6857                          * As Rx frame are not going to be processed,
6858                          * using same mapped address for the Rxd
6859                          * buffer pointer
6860                          */
6861                         rxdp1->Buffer0_ptr = *temp0;
6862                 } else {
6863                         *skb = dev_alloc_skb(size);
6864                         if (!(*skb)) {
6865                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6866                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6867                                 DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
6868                                 sp->mac_control.stats_info->sw_stat. \
6869                                         mem_alloc_fail_cnt++;
6870                                 return -ENOMEM ;
6871                         }
6872                         sp->mac_control.stats_info->sw_stat.mem_allocated
6873                                 += (*skb)->truesize;
6874                         /* storing the mapped addr in a temp variable
6875                          * such it will be used for next rxd whose
6876                          * Host Control is NULL
6877                          */
6878                         rxdp1->Buffer0_ptr = *temp0 =
6879                                 pci_map_single( sp->pdev, (*skb)->data,
6880                                         size - NET_IP_ALIGN,
6881                                         PCI_DMA_FROMDEVICE);
6882                         if (pci_dma_mapping_error(rxdp1->Buffer0_ptr))
6883                                 goto memalloc_failed;
6884                         rxdp->Host_Control = (unsigned long) (*skb);
6885                 }
6886         } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
6887                 struct RxD3 *rxdp3 = (struct RxD3 *)rxdp;
6888                 /* Two buffer Mode */
6889                 if (*skb) {
6890                         rxdp3->Buffer2_ptr = *temp2;
6891                         rxdp3->Buffer0_ptr = *temp0;
6892                         rxdp3->Buffer1_ptr = *temp1;
6893                 } else {
6894                         *skb = dev_alloc_skb(size);
6895                         if (!(*skb)) {
6896                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6897                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6898                                 DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
6899                                 sp->mac_control.stats_info->sw_stat. \
6900                                         mem_alloc_fail_cnt++;
6901                                 return -ENOMEM;
6902                         }
6903                         sp->mac_control.stats_info->sw_stat.mem_allocated
6904                                 += (*skb)->truesize;
6905                         rxdp3->Buffer2_ptr = *temp2 =
6906                                 pci_map_single(sp->pdev, (*skb)->data,
6907                                                dev->mtu + 4,
6908                                                PCI_DMA_FROMDEVICE);
6909                         if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
6910                                 goto memalloc_failed;
6911                         rxdp3->Buffer0_ptr = *temp0 =
6912                                 pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
6913                                                 PCI_DMA_FROMDEVICE);
6914                         if (pci_dma_mapping_error(rxdp3->Buffer0_ptr)) {
6915                                 pci_unmap_single (sp->pdev,
6916                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6917                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6918                                 goto memalloc_failed;
6919                         }
6920                         rxdp->Host_Control = (unsigned long) (*skb);
6921
6922                         /* Buffer-1 will be dummy buffer not used */
6923                         rxdp3->Buffer1_ptr = *temp1 =
6924                                 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
6925                                                 PCI_DMA_FROMDEVICE);
6926                         if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) {
6927                                 pci_unmap_single (sp->pdev,
6928                                         (dma_addr_t)rxdp3->Buffer0_ptr,
6929                                         BUF0_LEN, PCI_DMA_FROMDEVICE);
6930                                 pci_unmap_single (sp->pdev,
6931                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6932                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6933                                 goto memalloc_failed;
6934                         }
6935                 }
6936         }
6937         return 0;
6938         memalloc_failed:
6939                 stats->pci_map_fail_cnt++;
6940                 stats->mem_freed += (*skb)->truesize;
6941                 dev_kfree_skb(*skb);
6942                 return -ENOMEM;
6943 }
6944
6945 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
6946                                 int size)
6947 {
6948         struct net_device *dev = sp->dev;
6949         if (sp->rxd_mode == RXD_MODE_1) {
6950                 rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN);
6951         } else if (sp->rxd_mode == RXD_MODE_3B) {
6952                 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
6953                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
6954                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4);
6955         }
6956 }
6957
6958 static  int rxd_owner_bit_reset(struct s2io_nic *sp)
6959 {
6960         int i, j, k, blk_cnt = 0, size;
6961         struct mac_info * mac_control = &sp->mac_control;
6962         struct config_param *config = &sp->config;
6963         struct net_device *dev = sp->dev;
6964         struct RxD_t *rxdp = NULL;
6965         struct sk_buff *skb = NULL;
6966         struct buffAdd *ba = NULL;
6967         u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
6968
6969         /* Calculate the size based on ring mode */
6970         size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
6971                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
6972         if (sp->rxd_mode == RXD_MODE_1)
6973                 size += NET_IP_ALIGN;
6974         else if (sp->rxd_mode == RXD_MODE_3B)
6975                 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
6976
6977         for (i = 0; i < config->rx_ring_num; i++) {
6978                 blk_cnt = config->rx_cfg[i].num_rxd /
6979                         (rxd_count[sp->rxd_mode] +1);
6980
6981                 for (j = 0; j < blk_cnt; j++) {
6982                         for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
6983                                 rxdp = mac_control->rings[i].
6984                                         rx_blocks[j].rxds[k].virt_addr;
6985                                 if(sp->rxd_mode == RXD_MODE_3B)
6986                                         ba = &mac_control->rings[i].ba[j][k];
6987                                 if (set_rxd_buffer_pointer(sp, rxdp, ba,
6988                                                        &skb,(u64 *)&temp0_64,
6989                                                        (u64 *)&temp1_64,
6990                                                        (u64 *)&temp2_64,
6991                                                         size) == ENOMEM) {
6992                                         return 0;
6993                                 }
6994
6995                                 set_rxd_buffer_size(sp, rxdp, size);
6996                                 wmb();
6997                                 /* flip the Ownership bit to Hardware */
6998                                 rxdp->Control_1 |= RXD_OWN_XENA;
6999                         }
7000                 }
7001         }
7002         return 0;
7003
7004 }
7005
7006 static int s2io_add_isr(struct s2io_nic * sp)
7007 {
7008         int ret = 0;
7009         struct net_device *dev = sp->dev;
7010         int err = 0;
7011
7012         if (sp->config.intr_type == MSI_X)
7013                 ret = s2io_enable_msi_x(sp);
7014         if (ret) {
7015                 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
7016                 sp->config.intr_type = INTA;
7017         }
7018
7019         /* Store the values of the MSIX table in the struct s2io_nic structure */
7020         store_xmsi_data(sp);
7021
7022         /* After proper initialization of H/W, register ISR */
7023         if (sp->config.intr_type == MSI_X) {
7024                 int i, msix_rx_cnt = 0;
7025
7026                 for (i = 0; i < sp->num_entries; i++) {
7027                         if (sp->s2io_entries[i].in_use == MSIX_FLG) {
7028                                 if (sp->s2io_entries[i].type ==
7029                                         MSIX_RING_TYPE) {
7030                                         sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
7031                                                 dev->name, i);
7032                                         err = request_irq(sp->entries[i].vector,
7033                                                 s2io_msix_ring_handle, 0,
7034                                                 sp->desc[i],
7035                                                 sp->s2io_entries[i].arg);
7036                                 } else if (sp->s2io_entries[i].type ==
7037                                         MSIX_ALARM_TYPE) {
7038                                         sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
7039                                         dev->name, i);
7040                                         err = request_irq(sp->entries[i].vector,
7041                                                 s2io_msix_fifo_handle, 0,
7042                                                 sp->desc[i],
7043                                                 sp->s2io_entries[i].arg);
7044
7045                                 }
7046                                 /* if either data or addr is zero print it. */
7047                                 if (!(sp->msix_info[i].addr &&
7048                                         sp->msix_info[i].data)) {
7049                                         DBG_PRINT(ERR_DBG,
7050                                                 "%s @Addr:0x%llx Data:0x%llx\n",
7051                                                 sp->desc[i],
7052                                                 (unsigned long long)
7053                                                 sp->msix_info[i].addr,
7054                                                 (unsigned long long)
7055                                                 ntohl(sp->msix_info[i].data));
7056                                 } else
7057                                         msix_rx_cnt++;
7058                                 if (err) {
7059                                         remove_msix_isr(sp);
7060
7061                                         DBG_PRINT(ERR_DBG,
7062                                                 "%s:MSI-X-%d registration "
7063                                                 "failed\n", dev->name, i);
7064
7065                                         DBG_PRINT(ERR_DBG,
7066                                                 "%s: Defaulting to INTA\n",
7067                                                 dev->name);
7068                                         sp->config.intr_type = INTA;
7069                                         break;
7070                                 }
7071                                 sp->s2io_entries[i].in_use =
7072                                         MSIX_REGISTERED_SUCCESS;
7073                         }
7074                 }
7075                 if (!err) {
7076                         printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
7077                                 --msix_rx_cnt);
7078                         DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
7079                                                 " through alarm vector\n");
7080                 }
7081         }
7082         if (sp->config.intr_type == INTA) {
7083                 err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
7084                                 sp->name, dev);
7085                 if (err) {
7086                         DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
7087                                   dev->name);
7088                         return -1;
7089                 }
7090         }
7091         return 0;
7092 }
7093 static void s2io_rem_isr(struct s2io_nic * sp)
7094 {
7095         if (sp->config.intr_type == MSI_X)
7096                 remove_msix_isr(sp);
7097         else
7098                 remove_inta_isr(sp);
7099 }
7100
7101 static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
7102 {
7103         int cnt = 0;
7104         struct XENA_dev_config __iomem *bar0 = sp->bar0;
7105         register u64 val64 = 0;
7106         struct config_param *config;
7107         config = &sp->config;
7108
7109         if (!is_s2io_card_up(sp))
7110                 return;
7111
7112         del_timer_sync(&sp->alarm_timer);
7113         /* If s2io_set_link task is executing, wait till it completes. */
7114         while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) {
7115                 msleep(50);
7116         }
7117         clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
7118
7119         /* Disable napi */
7120         if (sp->config.napi) {
7121                 int off = 0;
7122                 if (config->intr_type ==  MSI_X) {
7123                         for (; off < sp->config.rx_ring_num; off++)
7124                                 napi_disable(&sp->mac_control.rings[off].napi);
7125                         }
7126                 else
7127                         napi_disable(&sp->napi);
7128         }
7129
7130         /* disable Tx and Rx traffic on the NIC */
7131         if (do_io)
7132                 stop_nic(sp);
7133
7134         s2io_rem_isr(sp);
7135
7136         /* Check if the device is Quiescent and then Reset the NIC */
7137         while(do_io) {
7138                 /* As per the HW requirement we need to replenish the
7139                  * receive buffer to avoid the ring bump. Since there is
7140                  * no intention of processing the Rx frame at this pointwe are
7141                  * just settting the ownership bit of rxd in Each Rx
7142                  * ring to HW and set the appropriate buffer size
7143                  * based on the ring mode
7144                  */
7145                 rxd_owner_bit_reset(sp);
7146
7147                 val64 = readq(&bar0->adapter_status);
7148                 if (verify_xena_quiescence(sp)) {
7149                         if(verify_pcc_quiescent(sp, sp->device_enabled_once))
7150                         break;
7151                 }
7152
7153                 msleep(50);
7154                 cnt++;
7155                 if (cnt == 10) {
7156                         DBG_PRINT(ERR_DBG,
7157                                   "s2io_close:Device not Quiescent ");
7158                         DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
7159                                   (unsigned long long) val64);
7160                         break;
7161                 }
7162         }
7163         if (do_io)
7164                 s2io_reset(sp);
7165
7166         /* Free all Tx buffers */
7167         free_tx_buffers(sp);
7168
7169         /* Free all Rx buffers */
7170         free_rx_buffers(sp);
7171
7172         clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
7173 }
7174
7175 static void s2io_card_down(struct s2io_nic * sp)
7176 {
7177         do_s2io_card_down(sp, 1);
7178 }
7179
7180 static int s2io_card_up(struct s2io_nic * sp)
7181 {
7182         int i, ret = 0;
7183         struct mac_info *mac_control;
7184         struct config_param *config;
7185         struct net_device *dev = (struct net_device *) sp->dev;
7186         u16 interruptible;
7187
7188         /* Initialize the H/W I/O registers */
7189         ret = init_nic(sp);
7190         if (ret != 0) {
7191                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
7192                           dev->name);
7193                 if (ret != -EIO)
7194                         s2io_reset(sp);
7195                 return ret;
7196         }
7197
7198         /*
7199          * Initializing the Rx buffers. For now we are considering only 1
7200          * Rx ring and initializing buffers into 30 Rx blocks
7201          */
7202         mac_control = &sp->mac_control;
7203         config = &sp->config;
7204
7205         for (i = 0; i < config->rx_ring_num; i++) {
7206                 mac_control->rings[i].mtu = dev->mtu;
7207                 ret = fill_rx_buffers(&mac_control->rings[i]);
7208                 if (ret) {
7209                         DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
7210                                   dev->name);
7211                         s2io_reset(sp);
7212                         free_rx_buffers(sp);
7213                         return -ENOMEM;
7214                 }
7215                 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
7216                           mac_control->rings[i].rx_bufs_left);
7217         }
7218
7219         /* Initialise napi */
7220         if (config->napi) {
7221                 int i;
7222                 if (config->intr_type ==  MSI_X) {
7223                         for (i = 0; i < sp->config.rx_ring_num; i++)
7224                                 napi_enable(&sp->mac_control.rings[i].napi);
7225                 } else {
7226                         napi_enable(&sp->napi);
7227                 }
7228         }
7229
7230         /* Maintain the state prior to the open */
7231         if (sp->promisc_flg)
7232                 sp->promisc_flg = 0;
7233         if (sp->m_cast_flg) {
7234                 sp->m_cast_flg = 0;
7235                 sp->all_multi_pos= 0;
7236         }
7237
7238         /* Setting its receive mode */
7239         s2io_set_multicast(dev);
7240
7241         if (sp->lro) {
7242                 /* Initialize max aggregatable pkts per session based on MTU */
7243                 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
7244                 /* Check if we can use(if specified) user provided value */
7245                 if (lro_max_pkts < sp->lro_max_aggr_per_sess)
7246                         sp->lro_max_aggr_per_sess = lro_max_pkts;
7247         }
7248
7249         /* Enable Rx Traffic and interrupts on the NIC */
7250         if (start_nic(sp)) {
7251                 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
7252                 s2io_reset(sp);
7253                 free_rx_buffers(sp);
7254                 return -ENODEV;
7255         }
7256
7257         /* Add interrupt service routine */
7258         if (s2io_add_isr(sp) != 0) {
7259                 if (sp->config.intr_type == MSI_X)
7260                         s2io_rem_isr(sp);
7261                 s2io_reset(sp);
7262                 free_rx_buffers(sp);
7263                 return -ENODEV;
7264         }
7265
7266         S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
7267
7268         /*  Enable select interrupts */
7269         en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
7270         if (sp->config.intr_type != INTA)
7271                 en_dis_able_nic_intrs(sp, TX_TRAFFIC_INTR, ENABLE_INTRS);
7272         else {
7273                 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
7274                 interruptible |= TX_PIC_INTR;
7275                 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7276         }
7277
7278         set_bit(__S2IO_STATE_CARD_UP, &sp->state);
7279         return 0;
7280 }
7281
7282 /**
7283  * s2io_restart_nic - Resets the NIC.
7284  * @data : long pointer to the device private structure
7285  * Description:
7286  * This function is scheduled to be run by the s2io_tx_watchdog
7287  * function after 0.5 secs to reset the NIC. The idea is to reduce
7288  * the run time of the watch dog routine which is run holding a
7289  * spin lock.
7290  */
7291
7292 static void s2io_restart_nic(struct work_struct *work)
7293 {
7294         struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
7295         struct net_device *dev = sp->dev;
7296
7297         rtnl_lock();
7298
7299         if (!netif_running(dev))
7300                 goto out_unlock;
7301
7302         s2io_card_down(sp);
7303         if (s2io_card_up(sp)) {
7304                 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
7305                           dev->name);
7306         }
7307         s2io_wake_all_tx_queue(sp);
7308         DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
7309                   dev->name);
7310 out_unlock:
7311         rtnl_unlock();
7312 }
7313
7314 /**
7315  *  s2io_tx_watchdog - Watchdog for transmit side.
7316  *  @dev : Pointer to net device structure
7317  *  Description:
7318  *  This function is triggered if the Tx Queue is stopped
7319  *  for a pre-defined amount of time when the Interface is still up.
7320  *  If the Interface is jammed in such a situation, the hardware is
7321  *  reset (by s2io_close) and restarted again (by s2io_open) to
7322  *  overcome any problem that might have been caused in the hardware.
7323  *  Return value:
7324  *  void
7325  */
7326
7327 static void s2io_tx_watchdog(struct net_device *dev)
7328 {
7329         struct s2io_nic *sp = dev->priv;
7330
7331         if (netif_carrier_ok(dev)) {
7332                 sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt++;
7333                 schedule_work(&sp->rst_timer_task);
7334                 sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
7335         }
7336 }
7337
7338 /**
7339  *   rx_osm_handler - To perform some OS related operations on SKB.
7340  *   @sp: private member of the device structure,pointer to s2io_nic structure.
7341  *   @skb : the socket buffer pointer.
7342  *   @len : length of the packet
7343  *   @cksum : FCS checksum of the frame.
7344  *   @ring_no : the ring from which this RxD was extracted.
7345  *   Description:
7346  *   This function is called by the Rx interrupt serivce routine to perform
7347  *   some OS related operations on the SKB before passing it to the upper
7348  *   layers. It mainly checks if the checksum is OK, if so adds it to the
7349  *   SKBs cksum variable, increments the Rx packet count and passes the SKB
7350  *   to the upper layer. If the checksum is wrong, it increments the Rx
7351  *   packet error count, frees the SKB and returns error.
7352  *   Return value:
7353  *   SUCCESS on success and -1 on failure.
7354  */
7355 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
7356 {
7357         struct s2io_nic *sp = ring_data->nic;
7358         struct net_device *dev = (struct net_device *) ring_data->dev;
7359         struct sk_buff *skb = (struct sk_buff *)
7360                 ((unsigned long) rxdp->Host_Control);
7361         int ring_no = ring_data->ring_no;
7362         u16 l3_csum, l4_csum;
7363         unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
7364         struct lro *lro;
7365         u8 err_mask;
7366
7367         skb->dev = dev;
7368
7369         if (err) {
7370                 /* Check for parity error */
7371                 if (err & 0x1) {
7372                         sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
7373                 }
7374                 err_mask = err >> 48;
7375                 switch(err_mask) {
7376                         case 1:
7377                                 sp->mac_control.stats_info->sw_stat.
7378                                 rx_parity_err_cnt++;
7379                         break;
7380
7381                         case 2:
7382                                 sp->mac_control.stats_info->sw_stat.
7383                                 rx_abort_cnt++;
7384                         break;
7385
7386                         case 3:
7387                                 sp->mac_control.stats_info->sw_stat.
7388                                 rx_parity_abort_cnt++;
7389                         break;
7390
7391                         case 4:
7392                                 sp->mac_control.stats_info->sw_stat.
7393                                 rx_rda_fail_cnt++;
7394                         break;
7395
7396                         case 5:
7397                                 sp->mac_control.stats_info->sw_stat.
7398                                 rx_unkn_prot_cnt++;
7399                         break;
7400
7401                         case 6:
7402                                 sp->mac_control.stats_info->sw_stat.
7403                                 rx_fcs_err_cnt++;
7404                         break;
7405
7406                         case 7:
7407                                 sp->mac_control.stats_info->sw_stat.
7408                                 rx_buf_size_err_cnt++;
7409                         break;
7410
7411                         case 8:
7412                                 sp->mac_control.stats_info->sw_stat.
7413                                 rx_rxd_corrupt_cnt++;
7414                         break;
7415
7416                         case 15:
7417                                 sp->mac_control.stats_info->sw_stat.
7418                                 rx_unkn_err_cnt++;
7419                         break;
7420                 }
7421                 /*
7422                 * Drop the packet if bad transfer code. Exception being
7423                 * 0x5, which could be due to unsupported IPv6 extension header.
7424                 * In this case, we let stack handle the packet.
7425                 * Note that in this case, since checksum will be incorrect,
7426                 * stack will validate the same.
7427                 */
7428                 if (err_mask != 0x5) {
7429                         DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
7430                                 dev->name, err_mask);
7431                         sp->stats.rx_crc_errors++;
7432                         sp->mac_control.stats_info->sw_stat.mem_freed
7433                                 += skb->truesize;
7434                         dev_kfree_skb(skb);
7435                         ring_data->rx_bufs_left -= 1;
7436                         rxdp->Host_Control = 0;
7437                         return 0;
7438                 }
7439         }
7440
7441         /* Updating statistics */
7442         ring_data->rx_packets++;
7443         rxdp->Host_Control = 0;
7444         if (sp->rxd_mode == RXD_MODE_1) {
7445                 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
7446
7447                 ring_data->rx_bytes += len;
7448                 skb_put(skb, len);
7449
7450         } else if (sp->rxd_mode == RXD_MODE_3B) {
7451                 int get_block = ring_data->rx_curr_get_info.block_index;
7452                 int get_off = ring_data->rx_curr_get_info.offset;
7453                 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
7454                 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
7455                 unsigned char *buff = skb_push(skb, buf0_len);
7456
7457                 struct buffAdd *ba = &ring_data->ba[get_block][get_off];
7458                 ring_data->rx_bytes += buf0_len + buf2_len;
7459                 memcpy(buff, ba->ba_0, buf0_len);
7460                 skb_put(skb, buf2_len);
7461         }
7462
7463         if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && ((!ring_data->lro) ||
7464             (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
7465             (sp->rx_csum)) {
7466                 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
7467                 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
7468                 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
7469                         /*
7470                          * NIC verifies if the Checksum of the received
7471                          * frame is Ok or not and accordingly returns
7472                          * a flag in the RxD.
7473                          */
7474                         skb->ip_summed = CHECKSUM_UNNECESSARY;
7475                         if (ring_data->lro) {
7476                                 u32 tcp_len;
7477                                 u8 *tcp;
7478                                 int ret = 0;
7479
7480                                 ret = s2io_club_tcp_session(ring_data,
7481                                         skb->data, &tcp, &tcp_len, &lro,
7482                                         rxdp, sp);
7483                                 switch (ret) {
7484                                         case 3: /* Begin anew */
7485                                                 lro->parent = skb;
7486                                                 goto aggregate;
7487                                         case 1: /* Aggregate */
7488                                         {
7489                                                 lro_append_pkt(sp, lro,
7490                                                         skb, tcp_len);
7491                                                 goto aggregate;
7492                                         }
7493                                         case 4: /* Flush session */
7494                                         {
7495                                                 lro_append_pkt(sp, lro,
7496                                                         skb, tcp_len);
7497                                                 queue_rx_frame(lro->parent,
7498                                                         lro->vlan_tag);
7499                                                 clear_lro_session(lro);
7500                                                 sp->mac_control.stats_info->
7501                                                     sw_stat.flush_max_pkts++;
7502                                                 goto aggregate;
7503                                         }
7504                                         case 2: /* Flush both */
7505                                                 lro->parent->data_len =
7506                                                         lro->frags_len;
7507                                                 sp->mac_control.stats_info->
7508                                                      sw_stat.sending_both++;
7509                                                 queue_rx_frame(lro->parent,
7510                                                         lro->vlan_tag);
7511                                                 clear_lro_session(lro);
7512                                                 goto send_up;
7513                                         case 0: /* sessions exceeded */
7514                                         case -1: /* non-TCP or not
7515                                                   * L2 aggregatable
7516                                                   */
7517                                         case 5: /*
7518                                                  * First pkt in session not
7519                                                  * L3/L4 aggregatable
7520                                                  */
7521                                                 break;
7522                                         default:
7523                                                 DBG_PRINT(ERR_DBG,
7524                                                         "%s: Samadhana!!\n",
7525                                                          __FUNCTION__);
7526                                                 BUG();
7527                                 }
7528                         }
7529                 } else {
7530                         /*
7531                          * Packet with erroneous checksum, let the
7532                          * upper layers deal with it.
7533                          */
7534                         skb->ip_summed = CHECKSUM_NONE;
7535                 }
7536         } else
7537                 skb->ip_summed = CHECKSUM_NONE;
7538
7539         sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
7540 send_up:
7541         queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
7542         dev->last_rx = jiffies;
7543 aggregate:
7544         sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
7545         return SUCCESS;
7546 }
7547
7548 /**
7549  *  s2io_link - stops/starts the Tx queue.
7550  *  @sp : private member of the device structure, which is a pointer to the
7551  *  s2io_nic structure.
7552  *  @link : inidicates whether link is UP/DOWN.
7553  *  Description:
7554  *  This function stops/starts the Tx queue depending on whether the link
7555  *  status of the NIC is is down or up. This is called by the Alarm
7556  *  interrupt handler whenever a link change interrupt comes up.
7557  *  Return value:
7558  *  void.
7559  */
7560
7561 static void s2io_link(struct s2io_nic * sp, int link)
7562 {
7563         struct net_device *dev = (struct net_device *) sp->dev;
7564
7565         if (link != sp->last_link_state) {
7566                 init_tti(sp, link);
7567                 if (link == LINK_DOWN) {
7568                         DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
7569                         s2io_stop_all_tx_queue(sp);
7570                         netif_carrier_off(dev);
7571                         if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
7572                         sp->mac_control.stats_info->sw_stat.link_up_time =
7573                                 jiffies - sp->start_time;
7574                         sp->mac_control.stats_info->sw_stat.link_down_cnt++;
7575                 } else {
7576                         DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
7577                         if (sp->mac_control.stats_info->sw_stat.link_down_cnt)
7578                         sp->mac_control.stats_info->sw_stat.link_down_time =
7579                                 jiffies - sp->start_time;
7580                         sp->mac_control.stats_info->sw_stat.link_up_cnt++;
7581                         netif_carrier_on(dev);
7582                         s2io_wake_all_tx_queue(sp);
7583                 }
7584         }
7585         sp->last_link_state = link;
7586         sp->start_time = jiffies;
7587 }
7588
7589 /**
7590  *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
7591  *  @sp : private member of the device structure, which is a pointer to the
7592  *  s2io_nic structure.
7593  *  Description:
7594  *  This function initializes a few of the PCI and PCI-X configuration registers
7595  *  with recommended values.
7596  *  Return value:
7597  *  void
7598  */
7599
7600 static void s2io_init_pci(struct s2io_nic * sp)
7601 {
7602         u16 pci_cmd = 0, pcix_cmd = 0;
7603
7604         /* Enable Data Parity Error Recovery in PCI-X command register. */
7605         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7606                              &(pcix_cmd));
7607         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7608                               (pcix_cmd | 1));
7609         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7610                              &(pcix_cmd));
7611
7612         /* Set the PErr Response bit in PCI command register. */
7613         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7614         pci_write_config_word(sp->pdev, PCI_COMMAND,
7615                               (pci_cmd | PCI_COMMAND_PARITY));
7616         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7617 }
7618
7619 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
7620         u8 *dev_multiq)
7621 {
7622         if ((tx_fifo_num > MAX_TX_FIFOS) ||
7623                 (tx_fifo_num < 1)) {
7624                 DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
7625                         "(%d) not supported\n", tx_fifo_num);
7626
7627                 if (tx_fifo_num < 1)
7628                         tx_fifo_num = 1;
7629                 else
7630                         tx_fifo_num = MAX_TX_FIFOS;
7631
7632                 DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
7633                 DBG_PRINT(ERR_DBG, "tx fifos\n");
7634         }
7635
7636 #ifndef CONFIG_NETDEVICES_MULTIQUEUE
7637         if (multiq) {
7638                 DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n");
7639                 multiq = 0;
7640         }
7641 #endif
7642         if (multiq)
7643                 *dev_multiq = multiq;
7644
7645         if (tx_steering_type && (1 == tx_fifo_num)) {
7646                 if (tx_steering_type != TX_DEFAULT_STEERING)
7647                         DBG_PRINT(ERR_DBG,
7648                                 "s2io: Tx steering is not supported with "
7649                                 "one fifo. Disabling Tx steering.\n");
7650                 tx_steering_type = NO_STEERING;
7651         }
7652
7653         if ((tx_steering_type < NO_STEERING) ||
7654                 (tx_steering_type > TX_DEFAULT_STEERING)) {
7655                 DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not "
7656                          "supported\n");
7657                 DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
7658                 tx_steering_type = NO_STEERING;
7659         }
7660
7661         if (rx_ring_num > MAX_RX_RINGS) {
7662                 DBG_PRINT(ERR_DBG, "s2io: Requested number of rx rings not "
7663                          "supported\n");
7664                 DBG_PRINT(ERR_DBG, "s2io: Default to %d rx rings\n",
7665                         MAX_RX_RINGS);
7666                 rx_ring_num = MAX_RX_RINGS;
7667         }
7668
7669         if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
7670                 DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
7671                           "Defaulting to INTA\n");
7672                 *dev_intr_type = INTA;
7673         }
7674
7675         if ((*dev_intr_type == MSI_X) &&
7676                         ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
7677                         (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
7678                 DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
7679                                         "Defaulting to INTA\n");
7680                 *dev_intr_type = INTA;
7681         }
7682
7683         if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
7684                 DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
7685                 DBG_PRINT(ERR_DBG, "s2io: Defaulting to 1-buffer mode\n");
7686                 rx_ring_mode = 1;
7687         }
7688         return SUCCESS;
7689 }
7690
7691 /**
7692  * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
7693  * or Traffic class respectively.
7694  * @nic: device private variable
7695  * Description: The function configures the receive steering to
7696  * desired receive ring.
7697  * Return Value:  SUCCESS on success and
7698  * '-1' on failure (endian settings incorrect).
7699  */
7700 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
7701 {
7702         struct XENA_dev_config __iomem *bar0 = nic->bar0;
7703         register u64 val64 = 0;
7704
7705         if (ds_codepoint > 63)
7706                 return FAILURE;
7707
7708         val64 = RTS_DS_MEM_DATA(ring);
7709         writeq(val64, &bar0->rts_ds_mem_data);
7710
7711         val64 = RTS_DS_MEM_CTRL_WE |
7712                 RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
7713                 RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
7714
7715         writeq(val64, &bar0->rts_ds_mem_ctrl);
7716
7717         return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
7718                                 RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
7719                                 S2IO_BIT_RESET);
7720 }
7721
7722 /**
7723  *  s2io_init_nic - Initialization of the adapter .
7724  *  @pdev : structure containing the PCI related information of the device.
7725  *  @pre: List of PCI devices supported by the driver listed in s2io_tbl.
7726  *  Description:
7727  *  The function initializes an adapter identified by the pci_dec structure.
7728  *  All OS related initialization including memory and device structure and
7729  *  initlaization of the device private variable is done. Also the swapper
7730  *  control register is initialized to enable read and write into the I/O
7731  *  registers of the device.
7732  *  Return value:
7733  *  returns 0 on success and negative on failure.
7734  */
7735
7736 static int __devinit
7737 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
7738 {
7739         struct s2io_nic *sp;
7740         struct net_device *dev;
7741         int i, j, ret;
7742         int dma_flag = FALSE;
7743         u32 mac_up, mac_down;
7744         u64 val64 = 0, tmp64 = 0;
7745         struct XENA_dev_config __iomem *bar0 = NULL;
7746         u16 subid;
7747         struct mac_info *mac_control;
7748         struct config_param *config;
7749         int mode;
7750         u8 dev_intr_type = intr_type;
7751         u8 dev_multiq = 0;
7752         DECLARE_MAC_BUF(mac);
7753
7754         ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
7755         if (ret)
7756                 return ret;
7757
7758         if ((ret = pci_enable_device(pdev))) {
7759                 DBG_PRINT(ERR_DBG,
7760                           "s2io_init_nic: pci_enable_device failed\n");
7761                 return ret;
7762         }
7763
7764         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
7765                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
7766                 dma_flag = TRUE;
7767                 if (pci_set_consistent_dma_mask
7768                     (pdev, DMA_64BIT_MASK)) {
7769                         DBG_PRINT(ERR_DBG,
7770                                   "Unable to obtain 64bit DMA for \
7771                                         consistent allocations\n");
7772                         pci_disable_device(pdev);
7773                         return -ENOMEM;
7774                 }
7775         } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
7776                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
7777         } else {
7778                 pci_disable_device(pdev);
7779                 return -ENOMEM;
7780         }
7781         if ((ret = pci_request_regions(pdev, s2io_driver_name))) {
7782                 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x \n", __FUNCTION__, ret);
7783                 pci_disable_device(pdev);
7784                 return -ENODEV;
7785         }
7786 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
7787         if (dev_multiq)
7788                 dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
7789         else
7790 #endif
7791         dev = alloc_etherdev(sizeof(struct s2io_nic));
7792         if (dev == NULL) {
7793                 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
7794                 pci_disable_device(pdev);
7795                 pci_release_regions(pdev);
7796                 return -ENODEV;
7797         }
7798
7799         pci_set_master(pdev);
7800         pci_set_drvdata(pdev, dev);
7801         SET_NETDEV_DEV(dev, &pdev->dev);
7802
7803         /*  Private member variable initialized to s2io NIC structure */
7804         sp = dev->priv;
7805         memset(sp, 0, sizeof(struct s2io_nic));
7806         sp->dev = dev;
7807         sp->pdev = pdev;
7808         sp->high_dma_flag = dma_flag;
7809         sp->device_enabled_once = FALSE;
7810         if (rx_ring_mode == 1)
7811                 sp->rxd_mode = RXD_MODE_1;
7812         if (rx_ring_mode == 2)
7813                 sp->rxd_mode = RXD_MODE_3B;
7814
7815         sp->config.intr_type = dev_intr_type;
7816
7817         if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
7818                 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
7819                 sp->device_type = XFRAME_II_DEVICE;
7820         else
7821                 sp->device_type = XFRAME_I_DEVICE;
7822
7823         sp->lro = lro_enable;
7824
7825         /* Initialize some PCI/PCI-X fields of the NIC. */
7826         s2io_init_pci(sp);
7827
7828         /*
7829          * Setting the device configuration parameters.
7830          * Most of these parameters can be specified by the user during
7831          * module insertion as they are module loadable parameters. If
7832          * these parameters are not not specified during load time, they
7833          * are initialized with default values.
7834          */
7835         mac_control = &sp->mac_control;
7836         config = &sp->config;
7837
7838         config->napi = napi;
7839         config->tx_steering_type = tx_steering_type;
7840
7841         /* Tx side parameters. */
7842         if (config->tx_steering_type == TX_PRIORITY_STEERING)
7843                 config->tx_fifo_num = MAX_TX_FIFOS;
7844         else
7845                 config->tx_fifo_num = tx_fifo_num;
7846
7847         /* Initialize the fifos used for tx steering */
7848         if (config->tx_fifo_num < 5) {
7849                         if (config->tx_fifo_num  == 1)
7850                                 sp->total_tcp_fifos = 1;
7851                         else
7852                                 sp->total_tcp_fifos = config->tx_fifo_num - 1;
7853                         sp->udp_fifo_idx = config->tx_fifo_num - 1;
7854                         sp->total_udp_fifos = 1;
7855                         sp->other_fifo_idx = sp->total_tcp_fifos - 1;
7856         } else {
7857                 sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
7858                                                 FIFO_OTHER_MAX_NUM);
7859                 sp->udp_fifo_idx = sp->total_tcp_fifos;
7860                 sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
7861                 sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
7862         }
7863
7864         config->multiq = dev_multiq;
7865         for (i = 0; i < config->tx_fifo_num; i++) {
7866                 config->tx_cfg[i].fifo_len = tx_fifo_len[i];
7867                 config->tx_cfg[i].fifo_priority = i;
7868         }
7869
7870         /* mapping the QoS priority to the configured fifos */
7871         for (i = 0; i < MAX_TX_FIFOS; i++)
7872                 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
7873
7874         /* map the hashing selector table to the configured fifos */
7875         for (i = 0; i < config->tx_fifo_num; i++)
7876                 sp->fifo_selector[i] = fifo_selector[i];
7877
7878
7879         config->tx_intr_type = TXD_INT_TYPE_UTILZ;
7880         for (i = 0; i < config->tx_fifo_num; i++) {
7881                 config->tx_cfg[i].f_no_snoop =
7882                     (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
7883                 if (config->tx_cfg[i].fifo_len < 65) {
7884                         config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
7885                         break;
7886                 }
7887         }
7888         /* + 2 because one Txd for skb->data and one Txd for UFO */
7889         config->max_txds = MAX_SKB_FRAGS + 2;
7890
7891         /* Rx side parameters. */
7892         config->rx_ring_num = rx_ring_num;
7893         for (i = 0; i < config->rx_ring_num; i++) {
7894                 config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
7895                     (rxd_count[sp->rxd_mode] + 1);
7896                 config->rx_cfg[i].ring_priority = i;
7897                 mac_control->rings[i].rx_bufs_left = 0;
7898                 mac_control->rings[i].rxd_mode = sp->rxd_mode;
7899                 mac_control->rings[i].rxd_count = rxd_count[sp->rxd_mode];
7900                 mac_control->rings[i].pdev = sp->pdev;
7901                 mac_control->rings[i].dev = sp->dev;
7902         }
7903
7904         for (i = 0; i < rx_ring_num; i++) {
7905                 config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
7906                 config->rx_cfg[i].f_no_snoop =
7907                     (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
7908         }
7909
7910         /*  Setting Mac Control parameters */
7911         mac_control->rmac_pause_time = rmac_pause_time;
7912         mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
7913         mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
7914
7915
7916         /*  initialize the shared memory used by the NIC and the host */
7917         if (init_shared_mem(sp)) {
7918                 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
7919                           dev->name);
7920                 ret = -ENOMEM;
7921                 goto mem_alloc_failed;
7922         }
7923
7924         sp->bar0 = ioremap(pci_resource_start(pdev, 0),
7925                                      pci_resource_len(pdev, 0));
7926         if (!sp->bar0) {
7927                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
7928                           dev->name);
7929                 ret = -ENOMEM;
7930                 goto bar0_remap_failed;
7931         }
7932
7933         sp->bar1 = ioremap(pci_resource_start(pdev, 2),
7934                                      pci_resource_len(pdev, 2));
7935         if (!sp->bar1) {
7936                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
7937                           dev->name);
7938                 ret = -ENOMEM;
7939                 goto bar1_remap_failed;
7940         }
7941
7942         dev->irq = pdev->irq;
7943         dev->base_addr = (unsigned long) sp->bar0;
7944
7945         /* Initializing the BAR1 address as the start of the FIFO pointer. */
7946         for (j = 0; j < MAX_TX_FIFOS; j++) {
7947                 mac_control->tx_FIFO_start[j] = (struct TxFIFO_element __iomem *)
7948                     (sp->bar1 + (j * 0x00020000));
7949         }
7950
7951         /*  Driver entry points */
7952         dev->open = &s2io_open;
7953         dev->stop = &s2io_close;
7954         dev->hard_start_xmit = &s2io_xmit;
7955         dev->get_stats = &s2io_get_stats;
7956         dev->set_multicast_list = &s2io_set_multicast;
7957         dev->do_ioctl = &s2io_ioctl;
7958         dev->set_mac_address = &s2io_set_mac_addr;
7959         dev->change_mtu = &s2io_change_mtu;
7960         SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
7961         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
7962         dev->vlan_rx_register = s2io_vlan_rx_register;
7963         dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
7964
7965         /*
7966          * will use eth_mac_addr() for  dev->set_mac_address
7967          * mac address will be set every time dev->open() is called
7968          */
7969 #ifdef CONFIG_NET_POLL_CONTROLLER
7970         dev->poll_controller = s2io_netpoll;
7971 #endif
7972
7973         dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
7974         if (sp->high_dma_flag == TRUE)
7975                 dev->features |= NETIF_F_HIGHDMA;
7976         dev->features |= NETIF_F_TSO;
7977         dev->features |= NETIF_F_TSO6;
7978         if ((sp->device_type & XFRAME_II_DEVICE) && (ufo))  {
7979                 dev->features |= NETIF_F_UFO;
7980                 dev->features |= NETIF_F_HW_CSUM;
7981         }
7982 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
7983         if (config->multiq)
7984                 dev->features |= NETIF_F_MULTI_QUEUE;
7985 #endif
7986         dev->tx_timeout = &s2io_tx_watchdog;
7987         dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
7988         INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
7989         INIT_WORK(&sp->set_link_task, s2io_set_link);
7990
7991         pci_save_state(sp->pdev);
7992
7993         /* Setting swapper control on the NIC, for proper reset operation */
7994         if (s2io_set_swapper(sp)) {
7995                 DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
7996                           dev->name);
7997                 ret = -EAGAIN;
7998                 goto set_swap_failed;
7999         }
8000
8001         /* Verify if the Herc works on the slot its placed into */
8002         if (sp->device_type & XFRAME_II_DEVICE) {
8003                 mode = s2io_verify_pci_mode(sp);
8004                 if (mode < 0) {
8005                         DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
8006                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
8007                         ret = -EBADSLT;
8008                         goto set_swap_failed;
8009                 }
8010         }
8011
8012         if (sp->config.intr_type == MSI_X) {
8013                 sp->num_entries = config->rx_ring_num + 1;
8014                 ret = s2io_enable_msi_x(sp);
8015
8016                 if (!ret) {
8017                         ret = s2io_test_msi(sp);
8018                         /* rollback MSI-X, will re-enable during add_isr() */
8019                         remove_msix_isr(sp);
8020                 }
8021                 if (ret) {
8022
8023                         DBG_PRINT(ERR_DBG,
8024                           "%s: MSI-X requested but failed to enable\n",
8025                           dev->name);
8026                         sp->config.intr_type = INTA;
8027                 }
8028         }
8029
8030         if (config->intr_type ==  MSI_X) {
8031                 for (i = 0; i < config->rx_ring_num ; i++)
8032                         netif_napi_add(dev, &mac_control->rings[i].napi,
8033                                 s2io_poll_msix, 64);
8034         } else {
8035                 netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
8036         }
8037
8038         /* Not needed for Herc */
8039         if (sp->device_type & XFRAME_I_DEVICE) {
8040                 /*
8041                  * Fix for all "FFs" MAC address problems observed on
8042                  * Alpha platforms
8043                  */
8044                 fix_mac_address(sp);
8045                 s2io_reset(sp);
8046         }
8047
8048         /*
8049          * MAC address initialization.
8050          * For now only one mac address will be read and used.
8051          */
8052         bar0 = sp->bar0;
8053         val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
8054             RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
8055         writeq(val64, &bar0->rmac_addr_cmd_mem);
8056         wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
8057                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
8058         tmp64 = readq(&bar0->rmac_addr_data0_mem);
8059         mac_down = (u32) tmp64;
8060         mac_up = (u32) (tmp64 >> 32);
8061
8062         sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
8063         sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
8064         sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
8065         sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
8066         sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
8067         sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
8068
8069         /*  Set the factory defined MAC address initially   */
8070         dev->addr_len = ETH_ALEN;
8071         memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
8072         memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
8073
8074         /* initialize number of multicast & unicast MAC entries variables */
8075         if (sp->device_type == XFRAME_I_DEVICE) {
8076                 config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
8077                 config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
8078                 config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
8079         } else if (sp->device_type == XFRAME_II_DEVICE) {
8080                 config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
8081                 config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
8082                 config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
8083         }
8084
8085         /* store mac addresses from CAM to s2io_nic structure */
8086         do_s2io_store_unicast_mc(sp);
8087
8088         /* Configure MSIX vector for number of rings configured plus one */
8089         if ((sp->device_type == XFRAME_II_DEVICE) &&
8090                 (config->intr_type == MSI_X))
8091                 sp->num_entries = config->rx_ring_num + 1;
8092
8093          /* Store the values of the MSIX table in the s2io_nic structure */
8094         store_xmsi_data(sp);
8095         /* reset Nic and bring it to known state */
8096         s2io_reset(sp);
8097
8098         /*
8099          * Initialize link state flags
8100          * and the card state parameter
8101          */
8102         sp->state = 0;
8103
8104         /* Initialize spinlocks */
8105         for (i = 0; i < sp->config.tx_fifo_num; i++)
8106                 spin_lock_init(&mac_control->fifos[i].tx_lock);
8107
8108         /*
8109          * SXE-002: Configure link and activity LED to init state
8110          * on driver load.
8111          */
8112         subid = sp->pdev->subsystem_device;
8113         if ((subid & 0xFF) >= 0x07) {
8114                 val64 = readq(&bar0->gpio_control);
8115                 val64 |= 0x0000800000000000ULL;
8116                 writeq(val64, &bar0->gpio_control);
8117                 val64 = 0x0411040400000000ULL;
8118                 writeq(val64, (void __iomem *) bar0 + 0x2700);
8119                 val64 = readq(&bar0->gpio_control);
8120         }
8121
8122         sp->rx_csum = 1;        /* Rx chksum verify enabled by default */
8123
8124         if (register_netdev(dev)) {
8125                 DBG_PRINT(ERR_DBG, "Device registration failed\n");
8126                 ret = -ENODEV;
8127                 goto register_failed;
8128         }
8129         s2io_vpd_read(sp);
8130         DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
8131         DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
8132                   sp->product_name, pdev->revision);
8133         DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
8134                   s2io_driver_version);
8135         DBG_PRINT(ERR_DBG, "%s: MAC ADDR: %s\n",
8136                   dev->name, print_mac(mac, dev->dev_addr));
8137         DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
8138         if (sp->device_type & XFRAME_II_DEVICE) {
8139                 mode = s2io_print_pci_mode(sp);
8140                 if (mode < 0) {
8141                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
8142                         ret = -EBADSLT;
8143                         unregister_netdev(dev);
8144                         goto set_swap_failed;
8145                 }
8146         }
8147         switch(sp->rxd_mode) {
8148                 case RXD_MODE_1:
8149                     DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
8150                                                 dev->name);
8151                     break;
8152                 case RXD_MODE_3B:
8153                     DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
8154                                                 dev->name);
8155                     break;
8156         }
8157
8158         switch (sp->config.napi) {
8159         case 0:
8160                 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
8161                 break;
8162         case 1:
8163                 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
8164                 break;
8165         }
8166
8167         DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
8168                 sp->config.tx_fifo_num);
8169
8170         DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
8171                   sp->config.rx_ring_num);
8172
8173         switch(sp->config.intr_type) {
8174                 case INTA:
8175                     DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
8176                     break;
8177                 case MSI_X:
8178                     DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
8179                     break;
8180         }
8181         if (sp->config.multiq) {
8182         for (i = 0; i < sp->config.tx_fifo_num; i++)
8183                 mac_control->fifos[i].multiq = config->multiq;
8184                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
8185                         dev->name);
8186         } else
8187                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
8188                         dev->name);
8189
8190         switch (sp->config.tx_steering_type) {
8191         case NO_STEERING:
8192                 DBG_PRINT(ERR_DBG, "%s: No steering enabled for"
8193                         " transmit\n", dev->name);
8194                         break;
8195         case TX_PRIORITY_STEERING:
8196                 DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for"
8197                         " transmit\n", dev->name);
8198                 break;
8199         case TX_DEFAULT_STEERING:
8200                 DBG_PRINT(ERR_DBG, "%s: Default steering enabled for"
8201                         " transmit\n", dev->name);
8202         }
8203
8204         if (sp->lro)
8205                 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
8206                           dev->name);
8207         if (ufo)
8208                 DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
8209                                         " enabled\n", dev->name);
8210         /* Initialize device name */
8211         sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
8212
8213         /*
8214          * Make Link state as off at this point, when the Link change
8215          * interrupt comes the state will be automatically changed to
8216          * the right state.
8217          */
8218         netif_carrier_off(dev);
8219
8220         return 0;
8221
8222       register_failed:
8223       set_swap_failed:
8224         iounmap(sp->bar1);
8225       bar1_remap_failed:
8226         iounmap(sp->bar0);
8227       bar0_remap_failed:
8228       mem_alloc_failed:
8229         free_shared_mem(sp);
8230         pci_disable_device(pdev);
8231         pci_release_regions(pdev);
8232         pci_set_drvdata(pdev, NULL);
8233         free_netdev(dev);
8234
8235         return ret;
8236 }
8237
8238 /**
8239  * s2io_rem_nic - Free the PCI device
8240  * @pdev: structure containing the PCI related information of the device.
8241  * Description: This function is called by the Pci subsystem to release a
8242  * PCI device and free up all resource held up by the device. This could
8243  * be in response to a Hot plug event or when the driver is to be removed
8244  * from memory.
8245  */
8246
8247 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
8248 {
8249         struct net_device *dev =
8250             (struct net_device *) pci_get_drvdata(pdev);
8251         struct s2io_nic *sp;
8252
8253         if (dev == NULL) {
8254                 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
8255                 return;
8256         }
8257
8258         flush_scheduled_work();
8259
8260         sp = dev->priv;
8261         unregister_netdev(dev);
8262
8263         free_shared_mem(sp);
8264         iounmap(sp->bar0);
8265         iounmap(sp->bar1);
8266         pci_release_regions(pdev);
8267         pci_set_drvdata(pdev, NULL);
8268         free_netdev(dev);
8269         pci_disable_device(pdev);
8270 }
8271
8272 /**
8273  * s2io_starter - Entry point for the driver
8274  * Description: This function is the entry point for the driver. It verifies
8275  * the module loadable parameters and initializes PCI configuration space.
8276  */
8277
8278 static int __init s2io_starter(void)
8279 {
8280         return pci_register_driver(&s2io_driver);
8281 }
8282
8283 /**
8284  * s2io_closer - Cleanup routine for the driver
8285  * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
8286  */
8287
8288 static __exit void s2io_closer(void)
8289 {
8290         pci_unregister_driver(&s2io_driver);
8291         DBG_PRINT(INIT_DBG, "cleanup done\n");
8292 }
8293
8294 module_init(s2io_starter);
8295 module_exit(s2io_closer);
8296
8297 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
8298                 struct tcphdr **tcp, struct RxD_t *rxdp,
8299                 struct s2io_nic *sp)
8300 {
8301         int ip_off;
8302         u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
8303
8304         if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
8305                 DBG_PRINT(INIT_DBG,"%s: Non-TCP frames not supported for LRO\n",
8306                           __FUNCTION__);
8307                 return -1;
8308         }
8309
8310         /* Checking for DIX type or DIX type with VLAN */
8311         if ((l2_type == 0)
8312                 || (l2_type == 4)) {
8313                 ip_off = HEADER_ETHERNET_II_802_3_SIZE;
8314                 /*
8315                  * If vlan stripping is disabled and the frame is VLAN tagged,
8316                  * shift the offset by the VLAN header size bytes.
8317                  */
8318                 if ((!vlan_strip_flag) &&
8319                         (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
8320                         ip_off += HEADER_VLAN_SIZE;
8321         } else {
8322                 /* LLC, SNAP etc are considered non-mergeable */
8323                 return -1;
8324         }
8325
8326         *ip = (struct iphdr *)((u8 *)buffer + ip_off);
8327         ip_len = (u8)((*ip)->ihl);
8328         ip_len <<= 2;
8329         *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
8330
8331         return 0;
8332 }
8333
8334 static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
8335                                   struct tcphdr *tcp)
8336 {
8337         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8338         if ((lro->iph->saddr != ip->saddr) || (lro->iph->daddr != ip->daddr) ||
8339            (lro->tcph->source != tcp->source) || (lro->tcph->dest != tcp->dest))
8340                 return -1;
8341         return 0;
8342 }
8343
8344 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
8345 {
8346         return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
8347 }
8348
8349 static void initiate_new_session(struct lro *lro, u8 *l2h,
8350         struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len, u16 vlan_tag)
8351 {
8352         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8353         lro->l2h = l2h;
8354         lro->iph = ip;
8355         lro->tcph = tcp;
8356         lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
8357         lro->tcp_ack = tcp->ack_seq;
8358         lro->sg_num = 1;
8359         lro->total_len = ntohs(ip->tot_len);
8360         lro->frags_len = 0;
8361         lro->vlan_tag = vlan_tag;
8362         /*
8363          * check if we saw TCP timestamp. Other consistency checks have
8364          * already been done.
8365          */
8366         if (tcp->doff == 8) {
8367                 __be32 *ptr;
8368                 ptr = (__be32 *)(tcp+1);
8369                 lro->saw_ts = 1;
8370                 lro->cur_tsval = ntohl(*(ptr+1));
8371                 lro->cur_tsecr = *(ptr+2);
8372         }
8373         lro->in_use = 1;
8374 }
8375
8376 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
8377 {
8378         struct iphdr *ip = lro->iph;
8379         struct tcphdr *tcp = lro->tcph;
8380         __sum16 nchk;
8381         struct stat_block *statinfo = sp->mac_control.stats_info;
8382         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8383
8384         /* Update L3 header */
8385         ip->tot_len = htons(lro->total_len);
8386         ip->check = 0;
8387         nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
8388         ip->check = nchk;
8389
8390         /* Update L4 header */
8391         tcp->ack_seq = lro->tcp_ack;
8392         tcp->window = lro->window;
8393
8394         /* Update tsecr field if this session has timestamps enabled */
8395         if (lro->saw_ts) {
8396                 __be32 *ptr = (__be32 *)(tcp + 1);
8397                 *(ptr+2) = lro->cur_tsecr;
8398         }
8399
8400         /* Update counters required for calculation of
8401          * average no. of packets aggregated.
8402          */
8403         statinfo->sw_stat.sum_avg_pkts_aggregated += lro->sg_num;
8404         statinfo->sw_stat.num_aggregations++;
8405 }
8406
8407 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
8408                 struct tcphdr *tcp, u32 l4_pyld)
8409 {
8410         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8411         lro->total_len += l4_pyld;
8412         lro->frags_len += l4_pyld;
8413         lro->tcp_next_seq += l4_pyld;
8414         lro->sg_num++;
8415
8416         /* Update ack seq no. and window ad(from this pkt) in LRO object */
8417         lro->tcp_ack = tcp->ack_seq;
8418         lro->window = tcp->window;
8419
8420         if (lro->saw_ts) {
8421                 __be32 *ptr;
8422                 /* Update tsecr and tsval from this packet */
8423                 ptr = (__be32 *)(tcp+1);
8424                 lro->cur_tsval = ntohl(*(ptr+1));
8425                 lro->cur_tsecr = *(ptr + 2);
8426         }
8427 }
8428
8429 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
8430                                     struct tcphdr *tcp, u32 tcp_pyld_len)
8431 {
8432         u8 *ptr;
8433
8434         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8435
8436         if (!tcp_pyld_len) {
8437                 /* Runt frame or a pure ack */
8438                 return -1;
8439         }
8440
8441         if (ip->ihl != 5) /* IP has options */
8442                 return -1;
8443
8444         /* If we see CE codepoint in IP header, packet is not mergeable */
8445         if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
8446                 return -1;
8447
8448         /* If we see ECE or CWR flags in TCP header, packet is not mergeable */
8449         if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin ||
8450                                     tcp->ece || tcp->cwr || !tcp->ack) {
8451                 /*
8452                  * Currently recognize only the ack control word and
8453                  * any other control field being set would result in
8454                  * flushing the LRO session
8455                  */
8456                 return -1;
8457         }
8458
8459         /*
8460          * Allow only one TCP timestamp option. Don't aggregate if
8461          * any other options are detected.
8462          */
8463         if (tcp->doff != 5 && tcp->doff != 8)
8464                 return -1;
8465
8466         if (tcp->doff == 8) {
8467                 ptr = (u8 *)(tcp + 1);
8468                 while (*ptr == TCPOPT_NOP)
8469                         ptr++;
8470                 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
8471                         return -1;
8472
8473                 /* Ensure timestamp value increases monotonically */
8474                 if (l_lro)
8475                         if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
8476                                 return -1;
8477
8478                 /* timestamp echo reply should be non-zero */
8479                 if (*((__be32 *)(ptr+6)) == 0)
8480                         return -1;
8481         }
8482
8483         return 0;
8484 }
8485
8486 static int
8487 s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer, u8 **tcp,
8488         u32 *tcp_len, struct lro **lro, struct RxD_t *rxdp,
8489         struct s2io_nic *sp)
8490 {
8491         struct iphdr *ip;
8492         struct tcphdr *tcph;
8493         int ret = 0, i;
8494         u16 vlan_tag = 0;
8495
8496         if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
8497                                          rxdp, sp))) {
8498                 DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
8499                           ip->saddr, ip->daddr);
8500         } else
8501                 return ret;
8502
8503         vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
8504         tcph = (struct tcphdr *)*tcp;
8505         *tcp_len = get_l4_pyld_length(ip, tcph);
8506         for (i=0; i<MAX_LRO_SESSIONS; i++) {
8507                 struct lro *l_lro = &ring_data->lro0_n[i];
8508                 if (l_lro->in_use) {
8509                         if (check_for_socket_match(l_lro, ip, tcph))
8510                                 continue;
8511                         /* Sock pair matched */
8512                         *lro = l_lro;
8513
8514                         if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
8515                                 DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
8516                                           "0x%x, actual 0x%x\n", __FUNCTION__,
8517                                           (*lro)->tcp_next_seq,
8518                                           ntohl(tcph->seq));
8519
8520                                 sp->mac_control.stats_info->
8521                                    sw_stat.outof_sequence_pkts++;
8522                                 ret = 2;
8523                                 break;
8524                         }
8525
8526                         if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,*tcp_len))
8527                                 ret = 1; /* Aggregate */
8528                         else
8529                                 ret = 2; /* Flush both */
8530                         break;
8531                 }
8532         }
8533
8534         if (ret == 0) {
8535                 /* Before searching for available LRO objects,
8536                  * check if the pkt is L3/L4 aggregatable. If not
8537                  * don't create new LRO session. Just send this
8538                  * packet up.
8539                  */
8540                 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) {
8541                         return 5;
8542                 }
8543
8544                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
8545                         struct lro *l_lro = &ring_data->lro0_n[i];
8546                         if (!(l_lro->in_use)) {
8547                                 *lro = l_lro;
8548                                 ret = 3; /* Begin anew */
8549                                 break;
8550                         }
8551                 }
8552         }
8553
8554         if (ret == 0) { /* sessions exceeded */
8555                 DBG_PRINT(INFO_DBG,"%s:All LRO sessions already in use\n",
8556                           __FUNCTION__);
8557                 *lro = NULL;
8558                 return ret;
8559         }
8560
8561         switch (ret) {
8562                 case 3:
8563                         initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
8564                                                                 vlan_tag);
8565                         break;
8566                 case 2:
8567                         update_L3L4_header(sp, *lro);
8568                         break;
8569                 case 1:
8570                         aggregate_new_rx(*lro, ip, tcph, *tcp_len);
8571                         if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
8572                                 update_L3L4_header(sp, *lro);
8573                                 ret = 4; /* Flush the LRO */
8574                         }
8575                         break;
8576                 default:
8577                         DBG_PRINT(ERR_DBG,"%s:Dont know, can't say!!\n",
8578                                 __FUNCTION__);
8579                         break;
8580         }
8581
8582         return ret;
8583 }
8584
8585 static void clear_lro_session(struct lro *lro)
8586 {
8587         static u16 lro_struct_size = sizeof(struct lro);
8588
8589         memset(lro, 0, lro_struct_size);
8590 }
8591
8592 static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag)
8593 {
8594         struct net_device *dev = skb->dev;
8595         struct s2io_nic *sp = dev->priv;
8596
8597         skb->protocol = eth_type_trans(skb, dev);
8598         if (sp->vlgrp && vlan_tag
8599                 && (vlan_strip_flag)) {
8600                 /* Queueing the vlan frame to the upper layer */
8601                 if (sp->config.napi)
8602                         vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
8603                 else
8604                         vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag);
8605         } else {
8606                 if (sp->config.napi)
8607                         netif_receive_skb(skb);
8608                 else
8609                         netif_rx(skb);
8610         }
8611 }
8612
8613 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
8614                            struct sk_buff *skb,
8615                            u32 tcp_len)
8616 {
8617         struct sk_buff *first = lro->parent;
8618
8619         first->len += tcp_len;
8620         first->data_len = lro->frags_len;
8621         skb_pull(skb, (skb->len - tcp_len));
8622         if (skb_shinfo(first)->frag_list)
8623                 lro->last_frag->next = skb;
8624         else
8625                 skb_shinfo(first)->frag_list = skb;
8626         first->truesize += skb->truesize;
8627         lro->last_frag = skb;
8628         sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
8629         return;
8630 }
8631
8632 /**
8633  * s2io_io_error_detected - called when PCI error is detected
8634  * @pdev: Pointer to PCI device
8635  * @state: The current pci connection state
8636  *
8637  * This function is called after a PCI bus error affecting
8638  * this device has been detected.
8639  */
8640 static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
8641                                                pci_channel_state_t state)
8642 {
8643         struct net_device *netdev = pci_get_drvdata(pdev);
8644         struct s2io_nic *sp = netdev->priv;
8645
8646         netif_device_detach(netdev);
8647
8648         if (netif_running(netdev)) {
8649                 /* Bring down the card, while avoiding PCI I/O */
8650                 do_s2io_card_down(sp, 0);
8651         }
8652         pci_disable_device(pdev);
8653
8654         return PCI_ERS_RESULT_NEED_RESET;
8655 }
8656
8657 /**
8658  * s2io_io_slot_reset - called after the pci bus has been reset.
8659  * @pdev: Pointer to PCI device
8660  *
8661  * Restart the card from scratch, as if from a cold-boot.
8662  * At this point, the card has exprienced a hard reset,
8663  * followed by fixups by BIOS, and has its config space
8664  * set up identically to what it was at cold boot.
8665  */
8666 static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
8667 {
8668         struct net_device *netdev = pci_get_drvdata(pdev);
8669         struct s2io_nic *sp = netdev->priv;
8670
8671         if (pci_enable_device(pdev)) {
8672                 printk(KERN_ERR "s2io: "
8673                        "Cannot re-enable PCI device after reset.\n");
8674                 return PCI_ERS_RESULT_DISCONNECT;
8675         }
8676
8677         pci_set_master(pdev);
8678         s2io_reset(sp);
8679
8680         return PCI_ERS_RESULT_RECOVERED;
8681 }
8682
8683 /**
8684  * s2io_io_resume - called when traffic can start flowing again.
8685  * @pdev: Pointer to PCI device
8686  *
8687  * This callback is called when the error recovery driver tells
8688  * us that its OK to resume normal operation.
8689  */
8690 static void s2io_io_resume(struct pci_dev *pdev)
8691 {
8692         struct net_device *netdev = pci_get_drvdata(pdev);
8693         struct s2io_nic *sp = netdev->priv;
8694
8695         if (netif_running(netdev)) {
8696                 if (s2io_card_up(sp)) {
8697                         printk(KERN_ERR "s2io: "
8698                                "Can't bring device back up after reset.\n");
8699                         return;
8700                 }
8701
8702                 if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
8703                         s2io_card_down(sp);
8704                         printk(KERN_ERR "s2io: "
8705                                "Can't resetore mac addr after reset.\n");
8706                         return;
8707                 }
8708         }
8709
8710         netif_device_attach(netdev);
8711         netif_wake_queue(netdev);
8712 }