git.oblomov.eu Git - linux-2.6/blob - drivers/staging/rtl8187se/r8180_sa2400.c

   1 /*
   2    This files contains PHILIPS SA2400 radio frontend programming routines.
   3
   4    This is part of rtl8180 OpenSource driver
   5    Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
   6    Released under the terms of GPL (General Public Licence)
   7
   8    Parts of this driver are based on the GPL part of the
   9    official realtek driver
  10
  11    Parts of this driver are based on the rtl8180 driver skeleton
  12    from Patric Schenke & Andres Salomon
  13
  14    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
  15
  16    Code at http://che.ojctech.com/~dyoung/rtw/ has been useful to me to
  17    understand some things.
  18
  19    Code from rtl8181 project has been useful to me to understand some things.
  20
  21    We want to tanks the Authors of such projects and the Ndiswrapper
  22    project Authors.
  23 */
  24
  25
  26 #include "r8180.h"
  27 #include "r8180_hw.h"
  28 #include "r8180_sa2400.h"
  29
  30
  31 //#define DEBUG_SA2400
  32
  33 u32 sa2400_chan[] = {
  34         0x0,    //dummy channel 0
  35         0x00096c, //1
  36         0x080970, //2
  37         0x100974, //3
  38         0x180978, //4
  39         0x000980, //5
  40         0x080984, //6
  41         0x100988, //7
  42         0x18098c, //8
  43         0x000994, //9
  44         0x080998, //10
  45         0x10099c, //11
  46         0x1809a0, //12
  47         0x0009a8, //13
  48         0x0009b4, //14
  49 };
  50
  51
  52 void rf_stabilize(struct net_device *dev)
  53 {
  54         force_pci_posting(dev);
  55         mdelay(3); //for now use a great value.. we may optimize in future
  56 }
  57
  58
  59 void write_sa2400(struct net_device *dev,u8 adr, u32 data)
  60 {
  61 //      struct r8180_priv *priv = ieee80211_priv(dev);
  62         u32 phy_config;
  63
  64         // philips sa2400 expects 24 bits data
  65
  66         /*if(adr == 4 && priv->digphy){
  67                 phy_config=0x60000000;
  68         }else{
  69                 phy_config=0xb0000000;
  70         }*/
  71
  72         phy_config = 0xb0000000; // MAC will bang bits to the sa2400
  73
  74         phy_config |= (((u32)(adr&0xf))<< 24);
  75         phy_config |= (data & 0xffffff);
  76         write_nic_dword(dev,PHY_CONFIG,phy_config);
  77 #ifdef DEBUG_SA2400
  78         DMESG("Writing sa2400: %x (adr %x)",phy_config,adr);
  79 #endif
  80         rf_stabilize(dev);
  81 }
  82
  83
  84
  85 void sa2400_write_phy_antenna(struct net_device *dev,short ch)
  86 {
  87         struct r8180_priv *priv = ieee80211_priv(dev);
  88         u8 ant;
  89
  90         ant = SA2400_ANTENNA;
  91         if(priv->antb) /*default antenna is antenna B */
  92                 ant |= BB_ANTENNA_B;
  93         if(ch == 14)
  94                 ant |= BB_ANTATTEN_CHAN14;
  95         write_phy(dev,0x10,ant);
  96         //DMESG("BB antenna %x ",ant);
  97 }
  98
  99
 100 /* from the rtl8181 embedded driver */
 101 short sa2400_rf_set_sens(struct net_device *dev, short sens)
 102 {
 103         u8 finetune = 0;
 104         if ((sens > 85) || (sens < 54)) return -1;
 105
 106         write_sa2400(dev,5,0x1dfb | (sens-54) << 15 |(finetune<<20));  // AGC   0xc9dfb
 107
 108         return 0;
 109 }
 110
 111
 112 void sa2400_rf_set_chan(struct net_device *dev, short ch)
 113 {
 114         struct r8180_priv *priv = ieee80211_priv(dev);
 115         u32 txpw = 0xff & priv->chtxpwr[ch];
 116         u32 chan = sa2400_chan[ch];
 117
 118         write_sa2400(dev,7,txpw);
 119         //write_phy(dev,0x10,0xd1);
 120         sa2400_write_phy_antenna(dev,ch);
 121         write_sa2400(dev,0,chan);
 122         write_sa2400(dev,1,0xbb50);
 123         write_sa2400(dev,2,0x80);
 124         write_sa2400(dev,3,0);
 125 }
 126
 127
 128 void sa2400_rf_close(struct net_device *dev)
 129 {
 130         write_sa2400(dev, 4, 0);
 131 }
 132
 133
 134 void sa2400_rf_init(struct net_device *dev)
 135 {
 136         struct r8180_priv *priv = ieee80211_priv(dev);
 137         u32 anaparam;
 138         u8 firdac;
 139
 140         write_nic_byte(dev,PHY_DELAY,0x6);      //this is general
 141         write_nic_byte(dev,CARRIER_SENSE_COUNTER,0x4c); //this is general
 142
 143         /*these are philips sa2400 specific*/
 144         anaparam = read_nic_dword(dev,ANAPARAM);
 145         anaparam = anaparam &~ (1<<ANAPARAM_TXDACOFF_SHIFT);
 146
 147         anaparam = anaparam &~ANAPARAM_PWR1_MASK;
 148         anaparam = anaparam &~ANAPARAM_PWR0_MASK;
 149         if(priv->digphy){
 150                 anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON<<ANAPARAM_PWR1_SHIFT);
 151                 anaparam |= (SA2400_ANAPARAM_PWR0_ON<<ANAPARAM_PWR0_SHIFT);
 152         }else{
 153                 anaparam |= (SA2400_ANA_ANAPARAM_PWR1_ON<<ANAPARAM_PWR1_SHIFT);
 154         }
 155
 156         rtl8180_set_anaparam(dev,anaparam);
 157
 158         firdac = (priv->digphy) ? (1<<SA2400_REG4_FIRDAC_SHIFT) : 0;
 159         write_sa2400(dev,0,sa2400_chan[priv->chan]);
 160         write_sa2400(dev,1,0xbb50);
 161         write_sa2400(dev,2,0x80);
 162         write_sa2400(dev,3,0);
 163         write_sa2400(dev,4,0x19340 | firdac);
 164         write_sa2400(dev,5,0xc9dfb);  // AGC
 165         write_sa2400(dev,4,0x19348 | firdac);  //calibrates VCO
 166
 167         if(priv->digphy)
 168                 write_sa2400(dev,4,0x1938c); /*???*/
 169
 170         write_sa2400(dev,4,0x19340 | firdac);
 171
 172         write_sa2400(dev,0,sa2400_chan[priv->chan]);
 173         write_sa2400(dev,1,0xbb50);
 174         write_sa2400(dev,2,0x80);
 175         write_sa2400(dev,3,0);
 176         write_sa2400(dev,4,0x19344 | firdac); //calibrates filter
 177
 178         /* new from rtl8180 embedded driver (rtl8181 project) */
 179         write_sa2400(dev,6,0x13ff | (1<<23)); // MANRX
 180         write_sa2400(dev,8,0); //VCO
 181
 182         if(!priv->digphy)
 183         {
 184                 rtl8180_set_anaparam(dev, anaparam | \
 185                                      (1<<ANAPARAM_TXDACOFF_SHIFT));
 186
 187                 rtl8180_conttx_enable(dev);
 188
 189                 write_sa2400(dev, 4, 0x19341); // calibrates DC
 190
 191                 /* a 5us sleep is required here,
 192                    we rely on the 3ms delay introduced in write_sa2400
 193                 */
 194                 write_sa2400(dev, 4, 0x19345);
 195                 /* a 20us sleep is required here,
 196                    we rely on the 3ms delay introduced in write_sa2400
 197                 */
 198                 rtl8180_conttx_disable(dev);
 199
 200                 rtl8180_set_anaparam(dev, anaparam);
 201         }
 202         /* end new */
 203
 204         write_sa2400(dev,4,0x19341 | firdac ); //RTX MODE
 205
 206         // Set tx power level !?
 207
 208
 209         /*baseband configuration*/
 210         write_phy(dev,0,0x98);
 211         write_phy(dev,3,0x38);
 212         write_phy(dev,4,0xe0);
 213         write_phy(dev,5,0x90);
 214         write_phy(dev,6,0x1a);
 215         write_phy(dev,7,0x64);
 216
 217         /*Should be done something more here??*/
 218
 219         sa2400_write_phy_antenna(dev,priv->chan);
 220
 221         write_phy(dev,0x11,0x80);
 222         if(priv->diversity)
 223                 write_phy(dev,0x12,0xc7);
 224         else
 225                 write_phy(dev,0x12,0x47);
 226
 227         write_phy(dev,0x13,0x90 | priv->cs_treshold );
 228
 229         write_phy(dev,0x19,0x0);
 230         write_phy(dev,0x1a,0xa0);
 231
 232         sa2400_rf_set_chan(dev,priv->chan);
 233 }