git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/dispatcher/dsopcode.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsopcode - Dispatcher Op Region support and handling of
   4  *                         "control" opcodes
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2008, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include <acpi/acparser.h>
  47 #include <acpi/amlcode.h>
  48 #include <acpi/acdispat.h>
  49 #include <acpi/acinterp.h>
  50 #include <acpi/acnamesp.h>
  51 #include <acpi/acevents.h>
  52 #include <acpi/actables.h>
  53
  54 #define _COMPONENT          ACPI_DISPATCHER
  55 ACPI_MODULE_NAME("dsopcode")
  56
  57 /* Local prototypes */
  58 static acpi_status
  59 acpi_ds_execute_arguments(struct acpi_namespace_node *node,
  60                           struct acpi_namespace_node *scope_node,
  61                           u32 aml_length, u8 * aml_start);
  62
  63 static acpi_status
  64 acpi_ds_init_buffer_field(u16 aml_opcode,
  65                           union acpi_operand_object *obj_desc,
  66                           union acpi_operand_object *buffer_desc,
  67                           union acpi_operand_object *offset_desc,
  68                           union acpi_operand_object *length_desc,
  69                           union acpi_operand_object *result_desc);
  70
  71 /*******************************************************************************
  72  *
  73  * FUNCTION:    acpi_ds_execute_arguments
  74  *
  75  * PARAMETERS:  Node                - Object NS node
  76  *              scope_node          - Parent NS node
  77  *              aml_length          - Length of executable AML
  78  *              aml_start           - Pointer to the AML
  79  *
  80  * RETURN:      Status.
  81  *
  82  * DESCRIPTION: Late (deferred) execution of region or field arguments
  83  *
  84  ******************************************************************************/
  85
  86 static acpi_status
  87 acpi_ds_execute_arguments(struct acpi_namespace_node *node,
  88                           struct acpi_namespace_node *scope_node,
  89                           u32 aml_length, u8 * aml_start)
  90 {
  91         acpi_status status;
  92         union acpi_parse_object *op;
  93         struct acpi_walk_state *walk_state;
  94
  95         ACPI_FUNCTION_TRACE(ds_execute_arguments);
  96
  97         /*
  98          * Allocate a new parser op to be the root of the parsed tree
  99          */
 100         op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
 101         if (!op) {
 102                 return_ACPI_STATUS(AE_NO_MEMORY);
 103         }
 104
 105         /* Save the Node for use in acpi_ps_parse_aml */
 106
 107         op->common.node = scope_node;
 108
 109         /* Create and initialize a new parser state */
 110
 111         walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
 112         if (!walk_state) {
 113                 status = AE_NO_MEMORY;
 114                 goto cleanup;
 115         }
 116
 117         status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
 118                                        aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
 119         if (ACPI_FAILURE(status)) {
 120                 acpi_ds_delete_walk_state(walk_state);
 121                 goto cleanup;
 122         }
 123
 124         /* Mark this parse as a deferred opcode */
 125
 126         walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
 127         walk_state->deferred_node = node;
 128
 129         /* Pass1: Parse the entire declaration */
 130
 131         status = acpi_ps_parse_aml(walk_state);
 132         if (ACPI_FAILURE(status)) {
 133                 goto cleanup;
 134         }
 135
 136         /* Get and init the Op created above */
 137
 138         op->common.node = node;
 139         acpi_ps_delete_parse_tree(op);
 140
 141         /* Evaluate the deferred arguments */
 142
 143         op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
 144         if (!op) {
 145                 return_ACPI_STATUS(AE_NO_MEMORY);
 146         }
 147
 148         op->common.node = scope_node;
 149
 150         /* Create and initialize a new parser state */
 151
 152         walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
 153         if (!walk_state) {
 154                 status = AE_NO_MEMORY;
 155                 goto cleanup;
 156         }
 157
 158         /* Execute the opcode and arguments */
 159
 160         status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
 161                                        aml_length, NULL, ACPI_IMODE_EXECUTE);
 162         if (ACPI_FAILURE(status)) {
 163                 acpi_ds_delete_walk_state(walk_state);
 164                 goto cleanup;
 165         }
 166
 167         /* Mark this execution as a deferred opcode */
 168
 169         walk_state->deferred_node = node;
 170         status = acpi_ps_parse_aml(walk_state);
 171
 172       cleanup:
 173         acpi_ps_delete_parse_tree(op);
 174         return_ACPI_STATUS(status);
 175 }
 176
 177 /*******************************************************************************
 178  *
 179  * FUNCTION:    acpi_ds_get_buffer_field_arguments
 180  *
 181  * PARAMETERS:  obj_desc        - A valid buffer_field object
 182  *
 183  * RETURN:      Status.
 184  *
 185  * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
 186  *              evaluation of these field attributes.
 187  *
 188  ******************************************************************************/
 189
 190 acpi_status
 191 acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
 192 {
 193         union acpi_operand_object *extra_desc;
 194         struct acpi_namespace_node *node;
 195         acpi_status status;
 196
 197         ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc);
 198
 199         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 200                 return_ACPI_STATUS(AE_OK);
 201         }
 202
 203         /* Get the AML pointer (method object) and buffer_field node */
 204
 205         extra_desc = acpi_ns_get_secondary_object(obj_desc);
 206         node = obj_desc->buffer_field.node;
 207
 208         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 209                         (ACPI_TYPE_BUFFER_FIELD, node, NULL));
 210         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
 211                           acpi_ut_get_node_name(node)));
 212
 213         /* Execute the AML code for the term_arg arguments */
 214
 215         status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 216                                            extra_desc->extra.aml_length,
 217                                            extra_desc->extra.aml_start);
 218         return_ACPI_STATUS(status);
 219 }
 220
 221 /*******************************************************************************
 222  *
 223  * FUNCTION:    acpi_ds_get_bank_field_arguments
 224  *
 225  * PARAMETERS:  obj_desc        - A valid bank_field object
 226  *
 227  * RETURN:      Status.
 228  *
 229  * DESCRIPTION: Get bank_field bank_value. This implements the late
 230  *              evaluation of these field attributes.
 231  *
 232  ******************************************************************************/
 233
 234 acpi_status
 235 acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc)
 236 {
 237         union acpi_operand_object *extra_desc;
 238         struct acpi_namespace_node *node;
 239         acpi_status status;
 240
 241         ACPI_FUNCTION_TRACE_PTR(ds_get_bank_field_arguments, obj_desc);
 242
 243         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 244                 return_ACPI_STATUS(AE_OK);
 245         }
 246
 247         /* Get the AML pointer (method object) and bank_field node */
 248
 249         extra_desc = acpi_ns_get_secondary_object(obj_desc);
 250         node = obj_desc->bank_field.node;
 251
 252         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 253                         (ACPI_TYPE_LOCAL_BANK_FIELD, node, NULL));
 254         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BankField Arg Init\n",
 255                           acpi_ut_get_node_name(node)));
 256
 257         /* Execute the AML code for the term_arg arguments */
 258
 259         status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 260                                            extra_desc->extra.aml_length,
 261                                            extra_desc->extra.aml_start);
 262         return_ACPI_STATUS(status);
 263 }
 264
 265 /*******************************************************************************
 266  *
 267  * FUNCTION:    acpi_ds_get_buffer_arguments
 268  *
 269  * PARAMETERS:  obj_desc        - A valid Buffer object
 270  *
 271  * RETURN:      Status.
 272  *
 273  * DESCRIPTION: Get Buffer length and initializer byte list.  This implements
 274  *              the late evaluation of these attributes.
 275  *
 276  ******************************************************************************/
 277
 278 acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
 279 {
 280         struct acpi_namespace_node *node;
 281         acpi_status status;
 282
 283         ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc);
 284
 285         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 286                 return_ACPI_STATUS(AE_OK);
 287         }
 288
 289         /* Get the Buffer node */
 290
 291         node = obj_desc->buffer.node;
 292         if (!node) {
 293                 ACPI_ERROR((AE_INFO,
 294                             "No pointer back to NS node in buffer obj %p",
 295                             obj_desc));
 296                 return_ACPI_STATUS(AE_AML_INTERNAL);
 297         }
 298
 299         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n"));
 300
 301         /* Execute the AML code for the term_arg arguments */
 302
 303         status = acpi_ds_execute_arguments(node, node,
 304                                            obj_desc->buffer.aml_length,
 305                                            obj_desc->buffer.aml_start);
 306         return_ACPI_STATUS(status);
 307 }
 308
 309 /*******************************************************************************
 310  *
 311  * FUNCTION:    acpi_ds_get_package_arguments
 312  *
 313  * PARAMETERS:  obj_desc        - A valid Package object
 314  *
 315  * RETURN:      Status.
 316  *
 317  * DESCRIPTION: Get Package length and initializer byte list.  This implements
 318  *              the late evaluation of these attributes.
 319  *
 320  ******************************************************************************/
 321
 322 acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
 323 {
 324         struct acpi_namespace_node *node;
 325         acpi_status status;
 326
 327         ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc);
 328
 329         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 330                 return_ACPI_STATUS(AE_OK);
 331         }
 332
 333         /* Get the Package node */
 334
 335         node = obj_desc->package.node;
 336         if (!node) {
 337                 ACPI_ERROR((AE_INFO,
 338                             "No pointer back to NS node in package %p",
 339                             obj_desc));
 340                 return_ACPI_STATUS(AE_AML_INTERNAL);
 341         }
 342
 343         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n"));
 344
 345         /* Execute the AML code for the term_arg arguments */
 346
 347         status = acpi_ds_execute_arguments(node, node,
 348                                            obj_desc->package.aml_length,
 349                                            obj_desc->package.aml_start);
 350         return_ACPI_STATUS(status);
 351 }
 352
 353 /*****************************************************************************
 354  *
 355  * FUNCTION:    acpi_ds_get_region_arguments
 356  *
 357  * PARAMETERS:  obj_desc        - A valid region object
 358  *
 359  * RETURN:      Status.
 360  *
 361  * DESCRIPTION: Get region address and length.  This implements the late
 362  *              evaluation of these region attributes.
 363  *
 364  ****************************************************************************/
 365
 366 acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
 367 {
 368         struct acpi_namespace_node *node;
 369         acpi_status status;
 370         union acpi_operand_object *extra_desc;
 371
 372         ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc);
 373
 374         if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
 375                 return_ACPI_STATUS(AE_OK);
 376         }
 377
 378         extra_desc = acpi_ns_get_secondary_object(obj_desc);
 379         if (!extra_desc) {
 380                 return_ACPI_STATUS(AE_NOT_EXIST);
 381         }
 382
 383         /* Get the Region node */
 384
 385         node = obj_desc->region.node;
 386
 387         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 388                         (ACPI_TYPE_REGION, node, NULL));
 389
 390         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
 391                           acpi_ut_get_node_name(node),
 392                           extra_desc->extra.aml_start));
 393
 394         /* Execute the argument AML */
 395
 396         status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 397                                            extra_desc->extra.aml_length,
 398                                            extra_desc->extra.aml_start);
 399         if (ACPI_FAILURE(status)) {
 400                 return_ACPI_STATUS(status);
 401         }
 402
 403         /* Validate the region address/length via the host OS */
 404
 405         status = acpi_os_validate_address(obj_desc->region.space_id,
 406                                           obj_desc->region.address,
 407                                           (acpi_size) obj_desc->region.length,
 408                                           acpi_ut_get_node_name(node));
 409
 410         if (ACPI_FAILURE(status)) {
 411                 /*
 412                  * Invalid address/length. We will emit an error message and mark
 413                  * the region as invalid, so that it will cause an additional error if
 414                  * it is ever used. Then return AE_OK.
 415                  */
 416                 ACPI_EXCEPTION((AE_INFO, status,
 417                                 "During address validation of OpRegion [%4.4s]",
 418                                 node->name.ascii));
 419                 obj_desc->common.flags |= AOPOBJ_INVALID;
 420                 status = AE_OK;
 421         }
 422
 423         return_ACPI_STATUS(status);
 424 }
 425
 426 /*******************************************************************************
 427  *
 428  * FUNCTION:    acpi_ds_initialize_region
 429  *
 430  * PARAMETERS:  obj_handle      - Region namespace node
 431  *
 432  * RETURN:      Status
 433  *
 434  * DESCRIPTION: Front end to ev_initialize_region
 435  *
 436  ******************************************************************************/
 437
 438 acpi_status acpi_ds_initialize_region(acpi_handle obj_handle)
 439 {
 440         union acpi_operand_object *obj_desc;
 441         acpi_status status;
 442
 443         obj_desc = acpi_ns_get_attached_object(obj_handle);
 444
 445         /* Namespace is NOT locked */
 446
 447         status = acpi_ev_initialize_region(obj_desc, FALSE);
 448         return (status);
 449 }
 450
 451 /*******************************************************************************
 452  *
 453  * FUNCTION:    acpi_ds_init_buffer_field
 454  *
 455  * PARAMETERS:  aml_opcode      - create_xxx_field
 456  *              obj_desc        - buffer_field object
 457  *              buffer_desc     - Host Buffer
 458  *              offset_desc     - Offset into buffer
 459  *              length_desc     - Length of field (CREATE_FIELD_OP only)
 460  *              result_desc     - Where to store the result
 461  *
 462  * RETURN:      Status
 463  *
 464  * DESCRIPTION: Perform actual initialization of a buffer field
 465  *
 466  ******************************************************************************/
 467
 468 static acpi_status
 469 acpi_ds_init_buffer_field(u16 aml_opcode,
 470                           union acpi_operand_object *obj_desc,
 471                           union acpi_operand_object *buffer_desc,
 472                           union acpi_operand_object *offset_desc,
 473                           union acpi_operand_object *length_desc,
 474                           union acpi_operand_object *result_desc)
 475 {
 476         u32 offset;
 477         u32 bit_offset;
 478         u32 bit_count;
 479         u8 field_flags;
 480         acpi_status status;
 481
 482         ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc);
 483
 484         /* Host object must be a Buffer */
 485
 486         if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
 487                 ACPI_ERROR((AE_INFO,
 488                             "Target of Create Field is not a Buffer object - %s",
 489                             acpi_ut_get_object_type_name(buffer_desc)));
 490
 491                 status = AE_AML_OPERAND_TYPE;
 492                 goto cleanup;
 493         }
 494
 495         /*
 496          * The last parameter to all of these opcodes (result_desc) started
 497          * out as a name_string, and should therefore now be a NS node
 498          * after resolution in acpi_ex_resolve_operands().
 499          */
 500         if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
 501                 ACPI_ERROR((AE_INFO,
 502                             "(%s) destination not a NS Node [%s]",
 503                             acpi_ps_get_opcode_name(aml_opcode),
 504                             acpi_ut_get_descriptor_name(result_desc)));
 505
 506                 status = AE_AML_OPERAND_TYPE;
 507                 goto cleanup;
 508         }
 509
 510         offset = (u32) offset_desc->integer.value;
 511
 512         /*
 513          * Setup the Bit offsets and counts, according to the opcode
 514          */
 515         switch (aml_opcode) {
 516         case AML_CREATE_FIELD_OP:
 517
 518                 /* Offset is in bits, count is in bits */
 519
 520                 field_flags = AML_FIELD_ACCESS_BYTE;
 521                 bit_offset = offset;
 522                 bit_count = (u32) length_desc->integer.value;
 523
 524                 /* Must have a valid (>0) bit count */
 525
 526                 if (bit_count == 0) {
 527                         ACPI_ERROR((AE_INFO,
 528                                     "Attempt to CreateField of length zero"));
 529                         status = AE_AML_OPERAND_VALUE;
 530                         goto cleanup;
 531                 }
 532                 break;
 533
 534         case AML_CREATE_BIT_FIELD_OP:
 535
 536                 /* Offset is in bits, Field is one bit */
 537
 538                 bit_offset = offset;
 539                 bit_count = 1;
 540                 field_flags = AML_FIELD_ACCESS_BYTE;
 541                 break;
 542
 543         case AML_CREATE_BYTE_FIELD_OP:
 544
 545                 /* Offset is in bytes, field is one byte */
 546
 547                 bit_offset = 8 * offset;
 548                 bit_count = 8;
 549                 field_flags = AML_FIELD_ACCESS_BYTE;
 550                 break;
 551
 552         case AML_CREATE_WORD_FIELD_OP:
 553
 554                 /* Offset is in bytes, field is one word */
 555
 556                 bit_offset = 8 * offset;
 557                 bit_count = 16;
 558                 field_flags = AML_FIELD_ACCESS_WORD;
 559                 break;
 560
 561         case AML_CREATE_DWORD_FIELD_OP:
 562
 563                 /* Offset is in bytes, field is one dword */
 564
 565                 bit_offset = 8 * offset;
 566                 bit_count = 32;
 567                 field_flags = AML_FIELD_ACCESS_DWORD;
 568                 break;
 569
 570         case AML_CREATE_QWORD_FIELD_OP:
 571
 572                 /* Offset is in bytes, field is one qword */
 573
 574                 bit_offset = 8 * offset;
 575                 bit_count = 64;
 576                 field_flags = AML_FIELD_ACCESS_QWORD;
 577                 break;
 578
 579         default:
 580
 581                 ACPI_ERROR((AE_INFO,
 582                             "Unknown field creation opcode %02x", aml_opcode));
 583                 status = AE_AML_BAD_OPCODE;
 584                 goto cleanup;
 585         }
 586
 587         /* Entire field must fit within the current length of the buffer */
 588
 589         if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
 590                 ACPI_ERROR((AE_INFO,
 591                             "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
 592                             acpi_ut_get_node_name(result_desc),
 593                             bit_offset + bit_count,
 594                             acpi_ut_get_node_name(buffer_desc->buffer.node),
 595                             8 * (u32) buffer_desc->buffer.length));
 596                 status = AE_AML_BUFFER_LIMIT;
 597                 goto cleanup;
 598         }
 599
 600         /*
 601          * Initialize areas of the field object that are common to all fields
 602          * For field_flags, use LOCK_RULE = 0 (NO_LOCK),
 603          * UPDATE_RULE = 0 (UPDATE_PRESERVE)
 604          */
 605         status = acpi_ex_prep_common_field_object(obj_desc, field_flags, 0,
 606                                                   bit_offset, bit_count);
 607         if (ACPI_FAILURE(status)) {
 608                 goto cleanup;
 609         }
 610
 611         obj_desc->buffer_field.buffer_obj = buffer_desc;
 612
 613         /* Reference count for buffer_desc inherits obj_desc count */
 614
 615         buffer_desc->common.reference_count = (u16)
 616             (buffer_desc->common.reference_count +
 617              obj_desc->common.reference_count);
 618
 619       cleanup:
 620
 621         /* Always delete the operands */
 622
 623         acpi_ut_remove_reference(offset_desc);
 624         acpi_ut_remove_reference(buffer_desc);
 625
 626         if (aml_opcode == AML_CREATE_FIELD_OP) {
 627                 acpi_ut_remove_reference(length_desc);
 628         }
 629
 630         /* On failure, delete the result descriptor */
 631
 632         if (ACPI_FAILURE(status)) {
 633                 acpi_ut_remove_reference(result_desc);  /* Result descriptor */
 634         } else {
 635                 /* Now the address and length are valid for this buffer_field */
 636
 637                 obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
 638         }
 639
 640         return_ACPI_STATUS(status);
 641 }
 642
 643 /*******************************************************************************
 644  *
 645  * FUNCTION:    acpi_ds_eval_buffer_field_operands
 646  *
 647  * PARAMETERS:  walk_state      - Current walk
 648  *              Op              - A valid buffer_field Op object
 649  *
 650  * RETURN:      Status
 651  *
 652  * DESCRIPTION: Get buffer_field Buffer and Index
 653  *              Called from acpi_ds_exec_end_op during buffer_field parse tree walk
 654  *
 655  ******************************************************************************/
 656
 657 acpi_status
 658 acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
 659                                    union acpi_parse_object *op)
 660 {
 661         acpi_status status;
 662         union acpi_operand_object *obj_desc;
 663         struct acpi_namespace_node *node;
 664         union acpi_parse_object *next_op;
 665
 666         ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op);
 667
 668         /*
 669          * This is where we evaluate the address and length fields of the
 670          * create_xxx_field declaration
 671          */
 672         node = op->common.node;
 673
 674         /* next_op points to the op that holds the Buffer */
 675
 676         next_op = op->common.value.arg;
 677
 678         /* Evaluate/create the address and length operands */
 679
 680         status = acpi_ds_create_operands(walk_state, next_op);
 681         if (ACPI_FAILURE(status)) {
 682                 return_ACPI_STATUS(status);
 683         }
 684
 685         obj_desc = acpi_ns_get_attached_object(node);
 686         if (!obj_desc) {
 687                 return_ACPI_STATUS(AE_NOT_EXIST);
 688         }
 689
 690         /* Resolve the operands */
 691
 692         status = acpi_ex_resolve_operands(op->common.aml_opcode,
 693                                           ACPI_WALK_OPERANDS, walk_state);
 694         if (ACPI_FAILURE(status)) {
 695                 ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
 696                             acpi_ps_get_opcode_name(op->common.aml_opcode),
 697                             status));
 698
 699                 return_ACPI_STATUS(status);
 700         }
 701
 702         /* Initialize the Buffer Field */
 703
 704         if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
 705
 706                 /* NOTE: Slightly different operands for this opcode */
 707
 708                 status =
 709                     acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
 710                                               walk_state->operands[0],
 711                                               walk_state->operands[1],
 712                                               walk_state->operands[2],
 713                                               walk_state->operands[3]);
 714         } else {
 715                 /* All other, create_xxx_field opcodes */
 716
 717                 status =
 718                     acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
 719                                               walk_state->operands[0],
 720                                               walk_state->operands[1], NULL,
 721                                               walk_state->operands[2]);
 722         }
 723
 724         return_ACPI_STATUS(status);
 725 }
 726
 727 /*******************************************************************************
 728  *
 729  * FUNCTION:    acpi_ds_eval_region_operands
 730  *
 731  * PARAMETERS:  walk_state      - Current walk
 732  *              Op              - A valid region Op object
 733  *
 734  * RETURN:      Status
 735  *
 736  * DESCRIPTION: Get region address and length
 737  *              Called from acpi_ds_exec_end_op during op_region parse tree walk
 738  *
 739  ******************************************************************************/
 740
 741 acpi_status
 742 acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
 743                              union acpi_parse_object *op)
 744 {
 745         acpi_status status;
 746         union acpi_operand_object *obj_desc;
 747         union acpi_operand_object *operand_desc;
 748         struct acpi_namespace_node *node;
 749         union acpi_parse_object *next_op;
 750
 751         ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op);
 752
 753         /*
 754          * This is where we evaluate the address and length fields of the
 755          * op_region declaration
 756          */
 757         node = op->common.node;
 758
 759         /* next_op points to the op that holds the space_iD */
 760
 761         next_op = op->common.value.arg;
 762
 763         /* next_op points to address op */
 764
 765         next_op = next_op->common.next;
 766
 767         /* Evaluate/create the address and length operands */
 768
 769         status = acpi_ds_create_operands(walk_state, next_op);
 770         if (ACPI_FAILURE(status)) {
 771                 return_ACPI_STATUS(status);
 772         }
 773
 774         /* Resolve the length and address operands to numbers */
 775
 776         status = acpi_ex_resolve_operands(op->common.aml_opcode,
 777                                           ACPI_WALK_OPERANDS, walk_state);
 778         if (ACPI_FAILURE(status)) {
 779                 return_ACPI_STATUS(status);
 780         }
 781
 782         obj_desc = acpi_ns_get_attached_object(node);
 783         if (!obj_desc) {
 784                 return_ACPI_STATUS(AE_NOT_EXIST);
 785         }
 786
 787         /*
 788          * Get the length operand and save it
 789          * (at Top of stack)
 790          */
 791         operand_desc = walk_state->operands[walk_state->num_operands - 1];
 792
 793         obj_desc->region.length = (u32) operand_desc->integer.value;
 794         acpi_ut_remove_reference(operand_desc);
 795
 796         /*
 797          * Get the address and save it
 798          * (at top of stack - 1)
 799          */
 800         operand_desc = walk_state->operands[walk_state->num_operands - 2];
 801
 802         obj_desc->region.address = (acpi_physical_address)
 803             operand_desc->integer.value;
 804         acpi_ut_remove_reference(operand_desc);
 805
 806         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
 807                           obj_desc,
 808                           ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
 809                           obj_desc->region.length));
 810
 811         /* Now the address and length are valid for this opregion */
 812
 813         obj_desc->region.flags |= AOPOBJ_DATA_VALID;
 814
 815         return_ACPI_STATUS(status);
 816 }
 817
 818 /*******************************************************************************
 819  *
 820  * FUNCTION:    acpi_ds_eval_table_region_operands
 821  *
 822  * PARAMETERS:  walk_state      - Current walk
 823  *              Op              - A valid region Op object
 824  *
 825  * RETURN:      Status
 826  *
 827  * DESCRIPTION: Get region address and length
 828  *              Called from acpi_ds_exec_end_op during data_table_region parse tree walk
 829  *
 830  ******************************************************************************/
 831
 832 acpi_status
 833 acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state,
 834                                    union acpi_parse_object *op)
 835 {
 836         acpi_status status;
 837         union acpi_operand_object *obj_desc;
 838         union acpi_operand_object **operand;
 839         struct acpi_namespace_node *node;
 840         union acpi_parse_object *next_op;
 841         u32 table_index;
 842         struct acpi_table_header *table;
 843
 844         ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op);
 845
 846         /*
 847          * This is where we evaluate the signature_string and oem_iDString
 848          * and oem_table_iDString of the data_table_region declaration
 849          */
 850         node = op->common.node;
 851
 852         /* next_op points to signature_string op */
 853
 854         next_op = op->common.value.arg;
 855
 856         /*
 857          * Evaluate/create the signature_string and oem_iDString
 858          * and oem_table_iDString operands
 859          */
 860         status = acpi_ds_create_operands(walk_state, next_op);
 861         if (ACPI_FAILURE(status)) {
 862                 return_ACPI_STATUS(status);
 863         }
 864
 865         /*
 866          * Resolve the signature_string and oem_iDString
 867          * and oem_table_iDString operands
 868          */
 869         status = acpi_ex_resolve_operands(op->common.aml_opcode,
 870                                           ACPI_WALK_OPERANDS, walk_state);
 871         if (ACPI_FAILURE(status)) {
 872                 return_ACPI_STATUS(status);
 873         }
 874
 875         operand = &walk_state->operands[0];
 876
 877         /* Find the ACPI table */
 878
 879         status = acpi_tb_find_table(operand[0]->string.pointer,
 880                                     operand[1]->string.pointer,
 881                                     operand[2]->string.pointer, &table_index);
 882         if (ACPI_FAILURE(status)) {
 883                 return_ACPI_STATUS(status);
 884         }
 885
 886         acpi_ut_remove_reference(operand[0]);
 887         acpi_ut_remove_reference(operand[1]);
 888         acpi_ut_remove_reference(operand[2]);
 889
 890         status = acpi_get_table_by_index(table_index, &table);
 891         if (ACPI_FAILURE(status)) {
 892                 return_ACPI_STATUS(status);
 893         }
 894
 895         obj_desc = acpi_ns_get_attached_object(node);
 896         if (!obj_desc) {
 897                 return_ACPI_STATUS(AE_NOT_EXIST);
 898         }
 899
 900         obj_desc->region.address =
 901             (acpi_physical_address) ACPI_TO_INTEGER(table);
 902         obj_desc->region.length = table->length;
 903
 904         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
 905                           obj_desc,
 906                           ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
 907                           obj_desc->region.length));
 908
 909         /* Now the address and length are valid for this opregion */
 910
 911         obj_desc->region.flags |= AOPOBJ_DATA_VALID;
 912
 913         return_ACPI_STATUS(status);
 914 }
 915
 916 /*******************************************************************************
 917  *
 918  * FUNCTION:    acpi_ds_eval_data_object_operands
 919  *
 920  * PARAMETERS:  walk_state      - Current walk
 921  *              Op              - A valid data_object Op object
 922  *              obj_desc        - data_object
 923  *
 924  * RETURN:      Status
 925  *
 926  * DESCRIPTION: Get the operands and complete the following data object types:
 927  *              Buffer, Package.
 928  *
 929  ******************************************************************************/
 930
 931 acpi_status
 932 acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
 933                                   union acpi_parse_object *op,
 934                                   union acpi_operand_object *obj_desc)
 935 {
 936         acpi_status status;
 937         union acpi_operand_object *arg_desc;
 938         u32 length;
 939
 940         ACPI_FUNCTION_TRACE(ds_eval_data_object_operands);
 941
 942         /* The first operand (for all of these data objects) is the length */
 943
 944         /*
 945          * Set proper index into operand stack for acpi_ds_obj_stack_push
 946          * invoked inside acpi_ds_create_operand.
 947          */
 948         walk_state->operand_index = walk_state->num_operands;
 949
 950         status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1);
 951         if (ACPI_FAILURE(status)) {
 952                 return_ACPI_STATUS(status);
 953         }
 954
 955         status = acpi_ex_resolve_operands(walk_state->opcode,
 956                                           &(walk_state->
 957                                             operands[walk_state->num_operands -
 958                                                      1]), walk_state);
 959         if (ACPI_FAILURE(status)) {
 960                 return_ACPI_STATUS(status);
 961         }
 962
 963         /* Extract length operand */
 964
 965         arg_desc = walk_state->operands[walk_state->num_operands - 1];
 966         length = (u32) arg_desc->integer.value;
 967
 968         /* Cleanup for length operand */
 969
 970         status = acpi_ds_obj_stack_pop(1, walk_state);
 971         if (ACPI_FAILURE(status)) {
 972                 return_ACPI_STATUS(status);
 973         }
 974
 975         acpi_ut_remove_reference(arg_desc);
 976
 977         /*
 978          * Create the actual data object
 979          */
 980         switch (op->common.aml_opcode) {
 981         case AML_BUFFER_OP:
 982
 983                 status =
 984                     acpi_ds_build_internal_buffer_obj(walk_state, op, length,
 985                                                       &obj_desc);
 986                 break;
 987
 988         case AML_PACKAGE_OP:
 989         case AML_VAR_PACKAGE_OP:
 990
 991                 status =
 992                     acpi_ds_build_internal_package_obj(walk_state, op, length,
 993                                                        &obj_desc);
 994                 break;
 995
 996         default:
 997                 return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 998         }
 999
1000         if (ACPI_SUCCESS(status)) {
1001                 /*
1002                  * Return the object in the walk_state, unless the parent is a package -
1003                  * in this case, the return object will be stored in the parse tree
1004                  * for the package.
1005                  */
1006                 if ((!op->common.parent) ||
1007                     ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
1008                      (op->common.parent->common.aml_opcode !=
1009                       AML_VAR_PACKAGE_OP)
1010                      && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
1011                         walk_state->result_obj = obj_desc;
1012                 }
1013         }
1014
1015         return_ACPI_STATUS(status);
1016 }
1017
1018 /*******************************************************************************
1019  *
1020  * FUNCTION:    acpi_ds_eval_bank_field_operands
1021  *
1022  * PARAMETERS:  walk_state      - Current walk
1023  *              Op              - A valid bank_field Op object
1024  *
1025  * RETURN:      Status
1026  *
1027  * DESCRIPTION: Get bank_field bank_value
1028  *              Called from acpi_ds_exec_end_op during bank_field parse tree walk
1029  *
1030  ******************************************************************************/
1031
1032 acpi_status
1033 acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state,
1034                                  union acpi_parse_object *op)
1035 {
1036         acpi_status status;
1037         union acpi_operand_object *obj_desc;
1038         union acpi_operand_object *operand_desc;
1039         struct acpi_namespace_node *node;
1040         union acpi_parse_object *next_op;
1041         union acpi_parse_object *arg;
1042
1043         ACPI_FUNCTION_TRACE_PTR(ds_eval_bank_field_operands, op);
1044
1045         /*
1046          * This is where we evaluate the bank_value field of the
1047          * bank_field declaration
1048          */
1049
1050         /* next_op points to the op that holds the Region */
1051
1052         next_op = op->common.value.arg;
1053
1054         /* next_op points to the op that holds the Bank Register */
1055
1056         next_op = next_op->common.next;
1057
1058         /* next_op points to the op that holds the Bank Value */
1059
1060         next_op = next_op->common.next;
1061
1062         /*
1063          * Set proper index into operand stack for acpi_ds_obj_stack_push
1064          * invoked inside acpi_ds_create_operand.
1065          *
1066          * We use walk_state->Operands[0] to store the evaluated bank_value
1067          */
1068         walk_state->operand_index = 0;
1069
1070         status = acpi_ds_create_operand(walk_state, next_op, 0);
1071         if (ACPI_FAILURE(status)) {
1072                 return_ACPI_STATUS(status);
1073         }
1074
1075         status = acpi_ex_resolve_to_value(&walk_state->operands[0], walk_state);
1076         if (ACPI_FAILURE(status)) {
1077                 return_ACPI_STATUS(status);
1078         }
1079
1080         ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS,
1081                            acpi_ps_get_opcode_name(op->common.aml_opcode), 1);
1082         /*
1083          * Get the bank_value operand and save it
1084          * (at Top of stack)
1085          */
1086         operand_desc = walk_state->operands[0];
1087
1088         /* Arg points to the start Bank Field */
1089
1090         arg = acpi_ps_get_arg(op, 4);
1091         while (arg) {
1092
1093                 /* Ignore OFFSET and ACCESSAS terms here */
1094
1095                 if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
1096                         node = arg->common.node;
1097
1098                         obj_desc = acpi_ns_get_attached_object(node);
1099                         if (!obj_desc) {
1100                                 return_ACPI_STATUS(AE_NOT_EXIST);
1101                         }
1102
1103                         obj_desc->bank_field.value =
1104                             (u32) operand_desc->integer.value;
1105                 }
1106
1107                 /* Move to next field in the list */
1108
1109                 arg = arg->common.next;
1110         }
1111
1112         acpi_ut_remove_reference(operand_desc);
1113         return_ACPI_STATUS(status);
1114 }
1115
1116 /*******************************************************************************
1117  *
1118  * FUNCTION:    acpi_ds_exec_begin_control_op
1119  *
1120  * PARAMETERS:  walk_list       - The list that owns the walk stack
1121  *              Op              - The control Op
1122  *
1123  * RETURN:      Status
1124  *
1125  * DESCRIPTION: Handles all control ops encountered during control method
1126  *              execution.
1127  *
1128  ******************************************************************************/
1129
1130 acpi_status
1131 acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
1132                               union acpi_parse_object *op)
1133 {
1134         acpi_status status = AE_OK;
1135         union acpi_generic_state *control_state;
1136
1137         ACPI_FUNCTION_NAME(ds_exec_begin_control_op);
1138
1139         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", op,
1140                           op->common.aml_opcode, walk_state));
1141
1142         switch (op->common.aml_opcode) {
1143         case AML_IF_OP:
1144         case AML_WHILE_OP:
1145
1146                 /*
1147                  * IF/WHILE: Create a new control state to manage these
1148                  * constructs. We need to manage these as a stack, in order
1149                  * to handle nesting.
1150                  */
1151                 control_state = acpi_ut_create_control_state();
1152                 if (!control_state) {
1153                         status = AE_NO_MEMORY;
1154                         break;
1155                 }
1156                 /*
1157                  * Save a pointer to the predicate for multiple executions
1158                  * of a loop
1159                  */
1160                 control_state->control.aml_predicate_start =
1161                     walk_state->parser_state.aml - 1;
1162                 control_state->control.package_end =
1163                     walk_state->parser_state.pkg_end;
1164                 control_state->control.opcode = op->common.aml_opcode;
1165
1166                 /* Push the control state on this walk's control stack */
1167
1168                 acpi_ut_push_generic_state(&walk_state->control_state,
1169                                            control_state);
1170                 break;
1171
1172         case AML_ELSE_OP:
1173
1174                 /* Predicate is in the state object */
1175                 /* If predicate is true, the IF was executed, ignore ELSE part */
1176
1177                 if (walk_state->last_predicate) {
1178                         status = AE_CTRL_TRUE;
1179                 }
1180
1181                 break;
1182
1183         case AML_RETURN_OP:
1184
1185                 break;
1186
1187         default:
1188                 break;
1189         }
1190
1191         return (status);
1192 }
1193
1194 /*******************************************************************************
1195  *
1196  * FUNCTION:    acpi_ds_exec_end_control_op
1197  *
1198  * PARAMETERS:  walk_list       - The list that owns the walk stack
1199  *              Op              - The control Op
1200  *
1201  * RETURN:      Status
1202  *
1203  * DESCRIPTION: Handles all control ops encountered during control method
1204  *              execution.
1205  *
1206  ******************************************************************************/
1207
1208 acpi_status
1209 acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
1210                             union acpi_parse_object * op)
1211 {
1212         acpi_status status = AE_OK;
1213         union acpi_generic_state *control_state;
1214
1215         ACPI_FUNCTION_NAME(ds_exec_end_control_op);
1216
1217         switch (op->common.aml_opcode) {
1218         case AML_IF_OP:
1219
1220                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
1221
1222                 /*
1223                  * Save the result of the predicate in case there is an
1224                  * ELSE to come
1225                  */
1226                 walk_state->last_predicate =
1227                     (u8) walk_state->control_state->common.value;
1228
1229                 /*
1230                  * Pop the control state that was created at the start
1231                  * of the IF and free it
1232                  */
1233                 control_state =
1234                     acpi_ut_pop_generic_state(&walk_state->control_state);
1235                 acpi_ut_delete_generic_state(control_state);
1236                 break;
1237
1238         case AML_ELSE_OP:
1239
1240                 break;
1241
1242         case AML_WHILE_OP:
1243
1244                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
1245
1246                 if (walk_state->control_state->common.value) {
1247
1248                         /* Predicate was true, go back and evaluate it again! */
1249
1250                         status = AE_CTRL_PENDING;
1251                 }
1252
1253                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1254                                   "[WHILE_OP] termination! Op=%p\n", op));
1255
1256                 /* Pop this control state and free it */
1257
1258                 control_state =
1259                     acpi_ut_pop_generic_state(&walk_state->control_state);
1260
1261                 walk_state->aml_last_while =
1262                     control_state->control.aml_predicate_start;
1263                 acpi_ut_delete_generic_state(control_state);
1264                 break;
1265
1266         case AML_RETURN_OP:
1267
1268                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1269                                   "[RETURN_OP] Op=%p Arg=%p\n", op,
1270                                   op->common.value.arg));
1271
1272                 /*
1273                  * One optional operand -- the return value
1274                  * It can be either an immediate operand or a result that
1275                  * has been bubbled up the tree
1276                  */
1277                 if (op->common.value.arg) {
1278
1279                         /* Since we have a real Return(), delete any implicit return */
1280
1281                         acpi_ds_clear_implicit_return(walk_state);
1282
1283                         /* Return statement has an immediate operand */
1284
1285                         status =
1286                             acpi_ds_create_operands(walk_state,
1287                                                     op->common.value.arg);
1288                         if (ACPI_FAILURE(status)) {
1289                                 return (status);
1290                         }
1291
1292                         /*
1293                          * If value being returned is a Reference (such as
1294                          * an arg or local), resolve it now because it may
1295                          * cease to exist at the end of the method.
1296                          */
1297                         status =
1298                             acpi_ex_resolve_to_value(&walk_state->operands[0],
1299                                                      walk_state);
1300                         if (ACPI_FAILURE(status)) {
1301                                 return (status);
1302                         }
1303
1304                         /*
1305                          * Get the return value and save as the last result
1306                          * value.  This is the only place where walk_state->return_desc
1307                          * is set to anything other than zero!
1308                          */
1309                         walk_state->return_desc = walk_state->operands[0];
1310                 } else if (walk_state->result_count) {
1311
1312                         /* Since we have a real Return(), delete any implicit return */
1313
1314                         acpi_ds_clear_implicit_return(walk_state);
1315
1316                         /*
1317                          * The return value has come from a previous calculation.
1318                          *
1319                          * If value being returned is a Reference (such as
1320                          * an arg or local), resolve it now because it may
1321                          * cease to exist at the end of the method.
1322                          *
1323                          * Allow references created by the Index operator to return unchanged.
1324                          */
1325                         if ((ACPI_GET_DESCRIPTOR_TYPE
1326                              (walk_state->results->results.obj_desc[0]) ==
1327                              ACPI_DESC_TYPE_OPERAND)
1328                             &&
1329                             (ACPI_GET_OBJECT_TYPE
1330                              (walk_state->results->results.obj_desc[0]) ==
1331                              ACPI_TYPE_LOCAL_REFERENCE)
1332                             && ((walk_state->results->results.obj_desc[0])->
1333                                 reference.class != ACPI_REFCLASS_INDEX)) {
1334                                 status =
1335                                     acpi_ex_resolve_to_value(&walk_state->
1336                                                              results->results.
1337                                                              obj_desc[0],
1338                                                              walk_state);
1339                                 if (ACPI_FAILURE(status)) {
1340                                         return (status);
1341                                 }
1342                         }
1343
1344                         walk_state->return_desc =
1345                             walk_state->results->results.obj_desc[0];
1346                 } else {
1347                         /* No return operand */
1348
1349                         if (walk_state->num_operands) {
1350                                 acpi_ut_remove_reference(walk_state->
1351                                                          operands[0]);
1352                         }
1353
1354                         walk_state->operands[0] = NULL;
1355                         walk_state->num_operands = 0;
1356                         walk_state->return_desc = NULL;
1357                 }
1358
1359                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1360                                   "Completed RETURN_OP State=%p, RetVal=%p\n",
1361                                   walk_state, walk_state->return_desc));
1362
1363                 /* End the control method execution right now */
1364
1365                 status = AE_CTRL_TERMINATE;
1366                 break;
1367
1368         case AML_NOOP_OP:
1369
1370                 /* Just do nothing! */
1371                 break;
1372
1373         case AML_BREAK_POINT_OP:
1374
1375                 /* Call up to the OS service layer to handle this */
1376
1377                 status =
1378                     acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
1379                                    "Executed AML Breakpoint opcode");
1380
1381                 /* If and when it returns, all done. */
1382
1383                 break;
1384
1385         case AML_BREAK_OP:
1386         case AML_CONTINUE_OP:   /* ACPI 2.0 */
1387
1388                 /* Pop and delete control states until we find a while */
1389
1390                 while (walk_state->control_state &&
1391                        (walk_state->control_state->control.opcode !=
1392                         AML_WHILE_OP)) {
1393                         control_state =
1394                             acpi_ut_pop_generic_state(&walk_state->
1395                                                       control_state);
1396                         acpi_ut_delete_generic_state(control_state);
1397                 }
1398
1399                 /* No while found? */
1400
1401                 if (!walk_state->control_state) {
1402                         return (AE_AML_NO_WHILE);
1403                 }
1404
1405                 /* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
1406
1407                 walk_state->aml_last_while =
1408                     walk_state->control_state->control.package_end;
1409
1410                 /* Return status depending on opcode */
1411
1412                 if (op->common.aml_opcode == AML_BREAK_OP) {
1413                         status = AE_CTRL_BREAK;
1414                 } else {
1415                         status = AE_CTRL_CONTINUE;
1416                 }
1417                 break;
1418
1419         default:
1420
1421                 ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p",
1422                             op->common.aml_opcode, op));
1423
1424                 status = AE_AML_BAD_OPCODE;
1425                 break;
1426         }
1427
1428         return (status);
1429 }