Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
[linux-2.6] / arch / ppc / platforms / pmac_pic.c
1 /*
2  *  Support for the interrupt controllers found on Power Macintosh,
3  *  currently Apple's "Grand Central" interrupt controller in all
4  *  it's incarnations. OpenPIC support used on newer machines is
5  *  in a separate file
6  *
7  *  Copyright (C) 1997 Paul Mackerras (paulus@cs.anu.edu.au)
8  *
9  *  Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
10  *
11  *  This program is free software; you can redistribute it and/or
12  *  modify it under the terms of the GNU General Public License
13  *  as published by the Free Software Foundation; either version
14  *  2 of the License, or (at your option) any later version.
15  *
16  */
17
18 #include <linux/config.h>
19 #include <linux/stddef.h>
20 #include <linux/init.h>
21 #include <linux/sched.h>
22 #include <linux/signal.h>
23 #include <linux/pci.h>
24 #include <linux/interrupt.h>
25 #include <linux/sysdev.h>
26 #include <linux/adb.h>
27 #include <linux/pmu.h>
28
29 #include <asm/sections.h>
30 #include <asm/io.h>
31 #include <asm/smp.h>
32 #include <asm/prom.h>
33 #include <asm/pci-bridge.h>
34 #include <asm/time.h>
35 #include <asm/open_pic.h>
36 #include <asm/xmon.h>
37 #include <asm/pmac_feature.h>
38 #include <asm/machdep.h>
39
40 #include "pmac_pic.h"
41
42 /*
43  * XXX this should be in xmon.h, but putting it there means xmon.h
44  * has to include <linux/interrupt.h> (to get irqreturn_t), which
45  * causes all sorts of problems.  -- paulus
46  */
47 extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
48
49 struct pmac_irq_hw {
50         unsigned int    event;
51         unsigned int    enable;
52         unsigned int    ack;
53         unsigned int    level;
54 };
55
56 /* Default addresses */
57 static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
58         (struct pmac_irq_hw *) 0xf3000020,
59         (struct pmac_irq_hw *) 0xf3000010,
60         (struct pmac_irq_hw *) 0xf4000020,
61         (struct pmac_irq_hw *) 0xf4000010,
62 };
63
64 #define GC_LEVEL_MASK           0x3ff00000
65 #define OHARE_LEVEL_MASK        0x1ff00000
66 #define HEATHROW_LEVEL_MASK     0x1ff00000
67
68 static int max_irqs;
69 static int max_real_irqs;
70 static u32 level_mask[4];
71
72 static DEFINE_SPINLOCK(pmac_pic_lock);
73
74
75 #define GATWICK_IRQ_POOL_SIZE        10
76 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
77
78 #define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
79 static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
80
81 /*
82  * Mark an irq as "lost".  This is only used on the pmac
83  * since it can lose interrupts (see pmac_set_irq_mask).
84  * -- Cort
85  */
86 void
87 __set_lost(unsigned long irq_nr, int nokick)
88 {
89         if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
90                 atomic_inc(&ppc_n_lost_interrupts);
91                 if (!nokick)
92                         set_dec(1);
93         }
94 }
95
96 static void
97 pmac_mask_and_ack_irq(unsigned int irq_nr)
98 {
99         unsigned long bit = 1UL << (irq_nr & 0x1f);
100         int i = irq_nr >> 5;
101         unsigned long flags;
102
103         if ((unsigned)irq_nr >= max_irqs)
104                 return;
105
106         clear_bit(irq_nr, ppc_cached_irq_mask);
107         if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
108                 atomic_dec(&ppc_n_lost_interrupts);
109         spin_lock_irqsave(&pmac_pic_lock, flags);
110         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
111         out_le32(&pmac_irq_hw[i]->ack, bit);
112         do {
113                 /* make sure ack gets to controller before we enable
114                    interrupts */
115                 mb();
116         } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
117                 != (ppc_cached_irq_mask[i] & bit));
118         spin_unlock_irqrestore(&pmac_pic_lock, flags);
119 }
120
121 static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
122 {
123         unsigned long bit = 1UL << (irq_nr & 0x1f);
124         int i = irq_nr >> 5;
125         unsigned long flags;
126
127         if ((unsigned)irq_nr >= max_irqs)
128                 return;
129
130         spin_lock_irqsave(&pmac_pic_lock, flags);
131         /* enable unmasked interrupts */
132         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
133
134         do {
135                 /* make sure mask gets to controller before we
136                    return to user */
137                 mb();
138         } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
139                 != (ppc_cached_irq_mask[i] & bit));
140
141         /*
142          * Unfortunately, setting the bit in the enable register
143          * when the device interrupt is already on *doesn't* set
144          * the bit in the flag register or request another interrupt.
145          */
146         if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
147                 __set_lost((ulong)irq_nr, nokicklost);
148         spin_unlock_irqrestore(&pmac_pic_lock, flags);
149 }
150
151 /* When an irq gets requested for the first client, if it's an
152  * edge interrupt, we clear any previous one on the controller
153  */
154 static unsigned int pmac_startup_irq(unsigned int irq_nr)
155 {
156         unsigned long bit = 1UL << (irq_nr & 0x1f);
157         int i = irq_nr >> 5;
158
159         if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
160                 out_le32(&pmac_irq_hw[i]->ack, bit);
161         set_bit(irq_nr, ppc_cached_irq_mask);
162         pmac_set_irq_mask(irq_nr, 0);
163
164         return 0;
165 }
166
167 static void pmac_mask_irq(unsigned int irq_nr)
168 {
169         clear_bit(irq_nr, ppc_cached_irq_mask);
170         pmac_set_irq_mask(irq_nr, 0);
171         mb();
172 }
173
174 static void pmac_unmask_irq(unsigned int irq_nr)
175 {
176         set_bit(irq_nr, ppc_cached_irq_mask);
177         pmac_set_irq_mask(irq_nr, 0);
178 }
179
180 static void pmac_end_irq(unsigned int irq_nr)
181 {
182         if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
183             && irq_desc[irq_nr].action) {
184                 set_bit(irq_nr, ppc_cached_irq_mask);
185                 pmac_set_irq_mask(irq_nr, 1);
186         }
187 }
188
189
190 struct hw_interrupt_type pmac_pic = {
191         .typename       = " PMAC-PIC ",
192         .startup        = pmac_startup_irq,
193         .enable         = pmac_unmask_irq,
194         .disable        = pmac_mask_irq,
195         .ack            = pmac_mask_and_ack_irq,
196         .end            = pmac_end_irq,
197 };
198
199 struct hw_interrupt_type gatwick_pic = {
200         .typename       = " GATWICK  ",
201         .startup        = pmac_startup_irq,
202         .enable         = pmac_unmask_irq,
203         .disable        = pmac_mask_irq,
204         .ack            = pmac_mask_and_ack_irq,
205         .end            = pmac_end_irq,
206 };
207
208 static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
209 {
210         int irq, bits;
211
212         for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
213                 int i = irq >> 5;
214                 bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
215                 /* We must read level interrupts from the level register */
216                 bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
217                 bits &= ppc_cached_irq_mask[i];
218                 if (bits == 0)
219                         continue;
220                 irq += __ilog2(bits);
221                 __do_IRQ(irq, regs);
222                 return IRQ_HANDLED;
223         }
224         printk("gatwick irq not from gatwick pic\n");
225         return IRQ_NONE;
226 }
227
228 int
229 pmac_get_irq(struct pt_regs *regs)
230 {
231         int irq;
232         unsigned long bits = 0;
233
234 #ifdef CONFIG_SMP
235         void psurge_smp_message_recv(struct pt_regs *);
236
237         /* IPI's are a hack on the powersurge -- Cort */
238         if ( smp_processor_id() != 0 ) {
239                 psurge_smp_message_recv(regs);
240                 return -2;      /* ignore, already handled */
241         }
242 #endif /* CONFIG_SMP */
243         for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
244                 int i = irq >> 5;
245                 bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
246                 /* We must read level interrupts from the level register */
247                 bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
248                 bits &= ppc_cached_irq_mask[i];
249                 if (bits == 0)
250                         continue;
251                 irq += __ilog2(bits);
252                 break;
253         }
254
255         return irq;
256 }
257
258 /* This routine will fix some missing interrupt values in the device tree
259  * on the gatwick mac-io controller used by some PowerBooks
260  */
261 static void __init
262 pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
263 {
264         struct device_node *node;
265         int count;
266
267         memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
268         node = gw->child;
269         count = 0;
270         while(node)
271         {
272                 /* Fix SCC */
273                 if (strcasecmp(node->name, "escc") == 0)
274                         if (node->child) {
275                                 if (node->child->n_intrs < 3) {
276                                         node->child->intrs = &gatwick_int_pool[count];
277                                         count += 3;
278                                 }
279                                 node->child->n_intrs = 3;
280                                 node->child->intrs[0].line = 15+irq_base;
281                                 node->child->intrs[1].line =  4+irq_base;
282                                 node->child->intrs[2].line =  5+irq_base;
283                                 printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
284                                         node->child->intrs[0].line,
285                                         node->child->intrs[1].line,
286                                         node->child->intrs[2].line);
287                         }
288                 /* Fix media-bay & left SWIM */
289                 if (strcasecmp(node->name, "media-bay") == 0) {
290                         struct device_node* ya_node;
291
292                         if (node->n_intrs == 0)
293                                 node->intrs = &gatwick_int_pool[count++];
294                         node->n_intrs = 1;
295                         node->intrs[0].line = 29+irq_base;
296                         printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
297                                         node->intrs[0].line);
298
299                         ya_node = node->child;
300                         while(ya_node)
301                         {
302                                 if (strcasecmp(ya_node->name, "floppy") == 0) {
303                                         if (ya_node->n_intrs < 2) {
304                                                 ya_node->intrs = &gatwick_int_pool[count];
305                                                 count += 2;
306                                         }
307                                         ya_node->n_intrs = 2;
308                                         ya_node->intrs[0].line = 19+irq_base;
309                                         ya_node->intrs[1].line =  1+irq_base;
310                                         printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
311                                                 ya_node->intrs[0].line, ya_node->intrs[1].line);
312                                 }
313                                 if (strcasecmp(ya_node->name, "ata4") == 0) {
314                                         if (ya_node->n_intrs < 2) {
315                                                 ya_node->intrs = &gatwick_int_pool[count];
316                                                 count += 2;
317                                         }
318                                         ya_node->n_intrs = 2;
319                                         ya_node->intrs[0].line = 14+irq_base;
320                                         ya_node->intrs[1].line =  3+irq_base;
321                                         printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
322                                                 ya_node->intrs[0].line, ya_node->intrs[1].line);
323                                 }
324                                 ya_node = ya_node->sibling;
325                         }
326                 }
327                 node = node->sibling;
328         }
329         if (count > 10) {
330                 printk("WARNING !! Gatwick interrupt pool overflow\n");
331                 printk("  GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
332                 printk("              requested = %d\n", count);
333         }
334 }
335
336 /*
337  * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
338  * card which includes an ohare chip that acts as a second interrupt
339  * controller.  If we find this second ohare, set it up and fix the
340  * interrupt value in the device tree for the ethernet chip.
341  */
342 static int __init enable_second_ohare(void)
343 {
344         unsigned char bus, devfn;
345         unsigned short cmd;
346         unsigned long addr;
347         struct device_node *irqctrler = find_devices("pci106b,7");
348         struct device_node *ether;
349
350         if (irqctrler == NULL || irqctrler->n_addrs <= 0)
351                 return -1;
352         addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
353         pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
354         max_irqs = 64;
355         if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
356                 struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
357                 if (!hose)
358                     printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
359                 else {
360                     early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
361                     cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
362                     cmd &= ~PCI_COMMAND_IO;
363                     early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
364                 }
365         }
366
367         /* Fix interrupt for the modem/ethernet combo controller. The number
368            in the device tree (27) is bogus (correct for the ethernet-only
369            board but not the combo ethernet/modem board).
370            The real interrupt is 28 on the second controller -> 28+32 = 60.
371         */
372         ether = find_devices("pci1011,14");
373         if (ether && ether->n_intrs > 0) {
374                 ether->intrs[0].line = 60;
375                 printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
376                        ether->intrs[0].line);
377         }
378
379         /* Return the interrupt number of the cascade */
380         return irqctrler->intrs[0].line;
381 }
382
383 #ifdef CONFIG_POWER4
384 static irqreturn_t k2u3_action(int cpl, void *dev_id, struct pt_regs *regs)
385 {
386         int irq;
387
388         irq = openpic2_get_irq(regs);
389         if (irq != -1)
390                 __do_IRQ(irq, regs);
391         return IRQ_HANDLED;
392 }
393
394 static struct irqaction k2u3_cascade_action = {
395         .handler        = k2u3_action,
396         .flags          = 0,
397         .mask           = CPU_MASK_NONE,
398         .name           = "U3->K2 Cascade",
399 };
400 #endif /* CONFIG_POWER4 */
401
402 #ifdef CONFIG_XMON
403 static struct irqaction xmon_action = {
404         .handler        = xmon_irq,
405         .flags          = 0,
406         .mask           = CPU_MASK_NONE,
407         .name           = "NMI - XMON"
408 };
409 #endif
410
411 static struct irqaction gatwick_cascade_action = {
412         .handler        = gatwick_action,
413         .flags          = SA_INTERRUPT,
414         .mask           = CPU_MASK_NONE,
415         .name           = "cascade",
416 };
417
418 void __init pmac_pic_init(void)
419 {
420         int i;
421         struct device_node *irqctrler  = NULL;
422         struct device_node *irqctrler2 = NULL;
423         struct device_node *np;
424         unsigned long addr;
425         int irq_cascade = -1;
426
427         /* We first try to detect Apple's new Core99 chipset, since mac-io
428          * is quite different on those machines and contains an IBM MPIC2.
429          */
430         np = find_type_devices("open-pic");
431         while(np) {
432                 if (np->parent && !strcmp(np->parent->name, "u3"))
433                         irqctrler2 = np;
434                 else
435                         irqctrler = np;
436                 np = np->next;
437         }
438         if (irqctrler != NULL)
439         {
440                 if (irqctrler->n_addrs > 0)
441                 {
442                         unsigned char senses[128];
443
444                         printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
445                                irqctrler->addrs[0].address);
446
447                         prom_get_irq_senses(senses, 0, 128);
448                         OpenPIC_InitSenses = senses;
449                         OpenPIC_NumInitSenses = 128;
450                         ppc_md.get_irq = openpic_get_irq;
451                         pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
452                         OpenPIC_Addr = ioremap(irqctrler->addrs[0].address,
453                                                irqctrler->addrs[0].size);
454                         openpic_init(0);
455
456 #ifdef CONFIG_POWER4
457                         if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
458                             irqctrler2->n_addrs > 0) {
459                                 printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
460                                        irqctrler2->addrs[0].address,
461                                        irqctrler2->intrs[0].line);
462                                 pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
463                                 OpenPIC2_Addr = ioremap(irqctrler2->addrs[0].address,
464                                                         irqctrler2->addrs[0].size);
465                                 prom_get_irq_senses(senses, PMAC_OPENPIC2_OFFSET,
466                                                     PMAC_OPENPIC2_OFFSET+128);
467                                 OpenPIC_InitSenses = senses;
468                                 OpenPIC_NumInitSenses = 128;
469                                 openpic2_init(PMAC_OPENPIC2_OFFSET);
470
471                                 if (setup_irq(irqctrler2->intrs[0].line,
472                                               &k2u3_cascade_action))
473                                         printk("Unable to get OpenPIC IRQ for cascade\n");
474                         }
475 #endif /* CONFIG_POWER4 */
476
477 #ifdef CONFIG_XMON
478                         {
479                                 struct device_node* pswitch;
480                                 int nmi_irq;
481
482                                 pswitch = find_devices("programmer-switch");
483                                 if (pswitch && pswitch->n_intrs) {
484                                         nmi_irq = pswitch->intrs[0].line;
485                                         openpic_init_nmi_irq(nmi_irq);
486                                         setup_irq(nmi_irq, &xmon_action);
487                                 }
488                         }
489 #endif  /* CONFIG_XMON */
490                         return;
491                 }
492                 irqctrler = NULL;
493         }
494
495         /* Get the level/edge settings, assume if it's not
496          * a Grand Central nor an OHare, then it's an Heathrow
497          * (or Paddington).
498          */
499         if (find_devices("gc"))
500                 level_mask[0] = GC_LEVEL_MASK;
501         else if (find_devices("ohare")) {
502                 level_mask[0] = OHARE_LEVEL_MASK;
503                 /* We might have a second cascaded ohare */
504                 level_mask[1] = OHARE_LEVEL_MASK;
505         } else {
506                 level_mask[0] = HEATHROW_LEVEL_MASK;
507                 level_mask[1] = 0;
508                 /* We might have a second cascaded heathrow */
509                 level_mask[2] = HEATHROW_LEVEL_MASK;
510                 level_mask[3] = 0;
511         }
512
513         /*
514          * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
515          * 1998 G3 Series PowerBooks have 128,
516          * other powermacs have 32.
517          * The combo ethernet/modem card for the Powerstar powerbooks
518          * (2400/3400/3500, ohare based) has a second ohare chip
519          * effectively making a total of 64.
520          */
521         max_irqs = max_real_irqs = 32;
522         irqctrler = find_devices("mac-io");
523         if (irqctrler)
524         {
525                 max_real_irqs = 64;
526                 if (irqctrler->next)
527                         max_irqs = 128;
528                 else
529                         max_irqs = 64;
530         }
531         for ( i = 0; i < max_real_irqs ; i++ )
532                 irq_desc[i].handler = &pmac_pic;
533
534         /* get addresses of first controller */
535         if (irqctrler) {
536                 if  (irqctrler->n_addrs > 0) {
537                         addr = (unsigned long)
538                                 ioremap(irqctrler->addrs[0].address, 0x40);
539                         for (i = 0; i < 2; ++i)
540                                 pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
541                                         (addr + (2 - i) * 0x10);
542                 }
543
544                 /* get addresses of second controller */
545                 irqctrler = irqctrler->next;
546                 if (irqctrler && irqctrler->n_addrs > 0) {
547                         addr = (unsigned long)
548                                 ioremap(irqctrler->addrs[0].address, 0x40);
549                         for (i = 2; i < 4; ++i)
550                                 pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
551                                         (addr + (4 - i) * 0x10);
552                         irq_cascade = irqctrler->intrs[0].line;
553                         if (device_is_compatible(irqctrler, "gatwick"))
554                                 pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
555                 }
556         } else {
557                 /* older powermacs have a GC (grand central) or ohare at
558                    f3000000, with interrupt control registers at f3000020. */
559                 addr = (unsigned long) ioremap(0xf3000000, 0x40);
560                 pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
561         }
562
563         /* PowerBooks 3400 and 3500 can have a second controller in a second
564            ohare chip, on the combo ethernet/modem card */
565         if (machine_is_compatible("AAPL,3400/2400")
566              || machine_is_compatible("AAPL,3500"))
567                 irq_cascade = enable_second_ohare();
568
569         /* disable all interrupts in all controllers */
570         for (i = 0; i * 32 < max_irqs; ++i)
571                 out_le32(&pmac_irq_hw[i]->enable, 0);
572         /* mark level interrupts */
573         for (i = 0; i < max_irqs; i++)
574                 if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
575                         irq_desc[i].status = IRQ_LEVEL;
576
577         /* get interrupt line of secondary interrupt controller */
578         if (irq_cascade >= 0) {
579                 printk(KERN_INFO "irq: secondary controller on irq %d\n",
580                         (int)irq_cascade);
581                 for ( i = max_real_irqs ; i < max_irqs ; i++ )
582                         irq_desc[i].handler = &gatwick_pic;
583                 setup_irq(irq_cascade, &gatwick_cascade_action);
584         }
585         printk("System has %d possible interrupts\n", max_irqs);
586         if (max_irqs != max_real_irqs)
587                 printk(KERN_DEBUG "%d interrupts on main controller\n",
588                         max_real_irqs);
589
590 #ifdef CONFIG_XMON
591         setup_irq(20, &xmon_action);
592 #endif  /* CONFIG_XMON */
593 }
594
595 #ifdef CONFIG_PM
596 /*
597  * These procedures are used in implementing sleep on the powerbooks.
598  * sleep_save_intrs() saves the states of all interrupt enables
599  * and disables all interrupts except for the nominated one.
600  * sleep_restore_intrs() restores the states of all interrupt enables.
601  */
602 unsigned long sleep_save_mask[2];
603
604 /* This used to be passed by the PMU driver but that link got
605  * broken with the new driver model. We use this tweak for now...
606  */
607 static int pmacpic_find_viaint(void)
608 {
609         int viaint = -1;
610
611 #ifdef CONFIG_ADB_PMU
612         struct device_node *np;
613
614         if (pmu_get_model() != PMU_OHARE_BASED)
615                 goto not_found;
616         np = of_find_node_by_name(NULL, "via-pmu");
617         if (np == NULL)
618                 goto not_found;
619         viaint = np->intrs[0].line;
620 #endif /* CONFIG_ADB_PMU */
621
622 not_found:
623         return viaint;
624 }
625
626 static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
627 {
628         int viaint = pmacpic_find_viaint();
629
630         sleep_save_mask[0] = ppc_cached_irq_mask[0];
631         sleep_save_mask[1] = ppc_cached_irq_mask[1];
632         ppc_cached_irq_mask[0] = 0;
633         ppc_cached_irq_mask[1] = 0;
634         if (viaint > 0)
635                 set_bit(viaint, ppc_cached_irq_mask);
636         out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
637         if (max_real_irqs > 32)
638                 out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
639         (void)in_le32(&pmac_irq_hw[0]->event);
640         /* make sure mask gets to controller before we return to caller */
641         mb();
642         (void)in_le32(&pmac_irq_hw[0]->enable);
643
644         return 0;
645 }
646
647 static int pmacpic_resume(struct sys_device *sysdev)
648 {
649         int i;
650
651         out_le32(&pmac_irq_hw[0]->enable, 0);
652         if (max_real_irqs > 32)
653                 out_le32(&pmac_irq_hw[1]->enable, 0);
654         mb();
655         for (i = 0; i < max_real_irqs; ++i)
656                 if (test_bit(i, sleep_save_mask))
657                         pmac_unmask_irq(i);
658
659         return 0;
660 }
661
662 #endif /* CONFIG_PM */
663
664 static struct sysdev_class pmacpic_sysclass = {
665         set_kset_name("pmac_pic"),
666 };
667
668 static struct sys_device device_pmacpic = {
669         .id             = 0,
670         .cls            = &pmacpic_sysclass,
671 };
672
673 static struct sysdev_driver driver_pmacpic = {
674 #ifdef CONFIG_PM
675         .suspend        = &pmacpic_suspend,
676         .resume         = &pmacpic_resume,
677 #endif /* CONFIG_PM */
678 };
679
680 static int __init init_pmacpic_sysfs(void)
681 {
682         if (max_irqs == 0)
683                 return -ENODEV;
684
685         printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
686         sysdev_class_register(&pmacpic_sysclass);
687         sysdev_register(&device_pmacpic);
688         sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
689         return 0;
690 }
691
692 subsys_initcall(init_pmacpic_sysfs);
693