git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/boot/dts/mpc7448hpc2.dts

   1 /*
   2  * MPC7448HPC2 (Taiga) board Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  * 2006 Roy Zang <Roy Zang at freescale.com>.
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13
  14 / {
  15         model = "mpc7448hpc2";
  16         compatible = "mpc74xx";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19         linux,phandle = <100>;
  20
  21         cpus {
  22                 #cpus = <1>;
  23                 #address-cells = <1>;
  24                 #size-cells =<0>;
  25                 linux,phandle = <200>;
  26
  27                 PowerPC,7448@0 {
  28                         device_type = "cpu";
  29                         reg = <0>;
  30                         d-cache-line-size = <20>;       // 32 bytes
  31                         i-cache-line-size = <20>;       // 32 bytes
  32                         d-cache-size = <8000>;          // L1, 32K bytes
  33                         i-cache-size = <8000>;          // L1, 32K bytes
  34                         timebase-frequency = <0>;       // 33 MHz, from uboot
  35                         clock-frequency = <0>;          // From U-Boot
  36                         bus-frequency = <0>;            // From U-Boot
  37                         32-bit;
  38                         linux,phandle = <201>;
  39                 };
  40         };
  41
  42         memory {
  43                 device_type = "memory";
  44                 linux,phandle = <300>;
  45                 reg = <00000000 20000000        // DDR2   512M at 0
  46                        >;
  47         };
  48
  49         tsi108@c0000000 {
  50                 #address-cells = <1>;
  51                 #size-cells = <1>;
  52                 #interrupt-cells = <2>;
  53                 device_type = "tsi-bridge";
  54                 ranges = <00000000 c0000000 00010000>;
  55                 reg = <c0000000 00010000>;
  56                 bus-frequency = <0>;
  57
  58                 i2c@7000 {
  59                         interrupt-parent = <7400>;
  60                         interrupts = <E 0>;
  61                         reg = <7000 400>;
  62                         device_type = "i2c";
  63                         compatible  = "tsi-i2c";
  64                 };
  65
  66                 mdio@6000 {
  67                         device_type = "mdio";
  68                         compatible = "tsi-ethernet";
  69
  70                         ethernet-phy@6000 {
  71                                 linux,phandle = <6000>;
  72                                 interrupt-parent = <7400>;
  73                                 interrupts = <2 1>;
  74                                 reg = <6000 50>;
  75                                 phy-id = <8>;
  76                                 device_type = "ethernet-phy";
  77                         };
  78
  79                         ethernet-phy@6400 {
  80                                 linux,phandle = <6400>;
  81                                 interrupt-parent = <7400>;
  82                                 interrupts = <2 1>;
  83                                 reg = <6000 50>;
  84                                 phy-id = <9>;
  85                                 device_type = "ethernet-phy";
  86                         };
  87
  88                 };
  89
  90                 ethernet@6200 {
  91                         #size-cells = <0>;
  92                         device_type = "network";
  93                         model = "TSI-ETH";
  94                         compatible = "tsi-ethernet";
  95                         reg = <6000 200>;
  96                         address = [ 00 06 D2 00 00 01 ];
  97                         interrupts = <10 2>;
  98                         interrupt-parent = <7400>;
  99                         phy-handle = <6000>;
 100                 };
 101
 102                 ethernet@6600 {
 103                         #address-cells = <1>;
 104                         #size-cells = <0>;
 105                         device_type = "network";
 106                         model = "TSI-ETH";
 107                         compatible = "tsi-ethernet";
 108                         reg = <6400 200>;
 109                         address = [ 00 06 D2 00 00 02 ];
 110                         interrupts = <11 2>;
 111                         interrupt-parent = <7400>;
 112                         phy-handle = <6400>;
 113                 };
 114
 115                 serial@7808 {
 116                         device_type = "serial";
 117                         compatible = "ns16550";
 118                         reg = <7808 200>;
 119                         clock-frequency = <3f6b5a00>;
 120                         interrupts = <c 0>;
 121                         interrupt-parent = <7400>;
 122                 };
 123
 124                 serial@7c08 {
 125                         device_type = "serial";
 126                         compatible = "ns16550";
 127                         reg = <7c08 200>;
 128                         clock-frequency = <3f6b5a00>;
 129                         interrupts = <d 0>;
 130                         interrupt-parent = <7400>;
 131                 };
 132
 133                 pic@7400 {
 134                         linux,phandle = <7400>;
 135                         clock-frequency = <0>;
 136                         interrupt-controller;
 137                         #address-cells = <0>;
 138                         #interrupt-cells = <2>;
 139                         reg = <7400 400>;
 140                         built-in;
 141                         compatible = "chrp,open-pic";
 142                         device_type = "open-pic";
 143                         big-endian;
 144                 };
 145                 pci@1000 {
 146                         compatible = "tsi10x";
 147                         device_type = "pci";
 148                         linux,phandle = <1000>;
 149                         #interrupt-cells = <1>;
 150                         #size-cells = <2>;
 151                         #address-cells = <3>;
 152                         reg = <1000 1000>;
 153                         bus-range = <0 0>;
 154                         ranges = <02000000 0 e0000000 e0000000 0 1A000000
 155                                   01000000 0 00000000 fa000000 0 00010000>;
 156                         clock-frequency = <7f28154>;
 157                         interrupt-parent = <7400>;
 158                         interrupts = <17 2>;
 159                         interrupt-map-mask = <f800 0 0 7>;
 160                         interrupt-map = <
 161
 162                                 /* IDSEL 0x11 */
 163                                 0800 0 0 1 1180 24 0
 164                                 0800 0 0 2 1180 25 0
 165                                 0800 0 0 3 1180 26 0
 166                                 0800 0 0 4 1180 27 0
 167
 168                                 /* IDSEL 0x12 */
 169                                 1000 0 0 1 1180 25 0
 170                                 1000 0 0 2 1180 26 0
 171                                 1000 0 0 3 1180 27 0
 172                                 1000 0 0 4 1180 24 0
 173
 174                                 /* IDSEL 0x13 */
 175                                 1800 0 0 1 1180 26 0
 176                                 1800 0 0 2 1180 27 0
 177                                 1800 0 0 3 1180 24 0
 178                                 1800 0 0 4 1180 25 0
 179
 180                                 /* IDSEL 0x14 */
 181                                 2000 0 0 1 1180 27 0
 182                                 2000 0 0 2 1180 24 0
 183                                 2000 0 0 3 1180 25 0
 184                                 2000 0 0 4 1180 26 0
 185                                 >;
 186                         router@1180 {
 187                                 linux,phandle = <1180>;
 188                                 clock-frequency = <0>;
 189                                 interrupt-controller;
 190                                 device_type = "pic-router";
 191                                 #address-cells = <0>;
 192                                 #interrupt-cells = <2>;
 193                                 built-in;
 194                                 big-endian;
 195                                 interrupts = <17 2>;
 196                                 interrupt-parent = <7400>;
 197                         };
 198                 };
 199         };
 200
 201 };