Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
[linux-2.6] / arch / arm / plat-s3c24xx / dma.c
1 /* linux/arch/arm/plat-s3c24xx/dma.c
2  *
3  * Copyright (c) 2003-2005,2006 Simtec Electronics
4  *      Ben Dooks <ben@simtec.co.uk>
5  *
6  * S3C2410 DMA core
7  *
8  * http://armlinux.simtec.co.uk/
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13 */
14
15
16 #ifdef CONFIG_S3C2410_DMA_DEBUG
17 #define DEBUG
18 #endif
19
20 #include <linux/module.h>
21 #include <linux/init.h>
22 #include <linux/sched.h>
23 #include <linux/spinlock.h>
24 #include <linux/interrupt.h>
25 #include <linux/sysdev.h>
26 #include <linux/slab.h>
27 #include <linux/errno.h>
28 #include <linux/delay.h>
29 #include <linux/io.h>
30
31 #include <asm/system.h>
32 #include <asm/irq.h>
33 #include <mach/hardware.h>
34 #include <asm/dma.h>
35
36 #include <asm/mach/dma.h>
37 #include <mach/map.h>
38
39 #include <plat/dma.h>
40
41 /* io map for dma */
42 static void __iomem *dma_base;
43 static struct kmem_cache *dma_kmem;
44
45 static int dma_channels;
46
47 static struct s3c24xx_dma_selection dma_sel;
48
49 /* dma channel state information */
50 struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
51
52 /* debugging functions */
53
54 #define BUF_MAGIC (0xcafebabe)
55
56 #define dmawarn(fmt...) printk(KERN_DEBUG fmt)
57
58 #define dma_regaddr(chan, reg) ((chan)->regs + (reg))
59
60 #if 1
61 #define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
62 #else
63 static inline void
64 dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
65 {
66         pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
67         writel(val, dma_regaddr(chan, reg));
68 }
69 #endif
70
71 #define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
72
73 /* captured register state for debug */
74
75 struct s3c2410_dma_regstate {
76         unsigned long         dcsrc;
77         unsigned long         disrc;
78         unsigned long         dstat;
79         unsigned long         dcon;
80         unsigned long         dmsktrig;
81 };
82
83 #ifdef CONFIG_S3C2410_DMA_DEBUG
84
85 /* dmadbg_showregs
86  *
87  * simple debug routine to print the current state of the dma registers
88 */
89
90 static void
91 dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
92 {
93         regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
94         regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
95         regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
96         regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
97         regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
98 }
99
100 static void
101 dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
102                  struct s3c2410_dma_regstate *regs)
103 {
104         printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
105                chan->number, fname, line,
106                regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
107                regs->dcon);
108 }
109
110 static void
111 dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
112 {
113         struct s3c2410_dma_regstate state;
114
115         dmadbg_capture(chan, &state);
116
117         printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
118                chan->number, fname, line, chan->load_state,
119                chan->curr, chan->next, chan->end);
120
121         dmadbg_dumpregs(fname, line, chan, &state);
122 }
123
124 static void
125 dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
126 {
127         struct s3c2410_dma_regstate state;
128
129         dmadbg_capture(chan, &state);
130         dmadbg_dumpregs(fname, line, chan, &state);
131 }
132
133 #define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan))
134 #define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan))
135 #else
136 #define dbg_showregs(chan) do { } while(0)
137 #define dbg_showchan(chan) do { } while(0)
138 #endif /* CONFIG_S3C2410_DMA_DEBUG */
139
140 static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
141
142 /* lookup_dma_channel
143  *
144  * change the dma channel number given into a real dma channel id
145 */
146
147 static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
148 {
149         if (channel & DMACH_LOW_LEVEL)
150                 return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
151         else
152                 return dma_chan_map[channel];
153 }
154
155 /* s3c2410_dma_stats_timeout
156  *
157  * Update DMA stats from timeout info
158 */
159
160 static void
161 s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
162 {
163         if (stats == NULL)
164                 return;
165
166         if (val > stats->timeout_longest)
167                 stats->timeout_longest = val;
168         if (val < stats->timeout_shortest)
169                 stats->timeout_shortest = val;
170
171         stats->timeout_avg += val;
172 }
173
174 /* s3c2410_dma_waitforload
175  *
176  * wait for the DMA engine to load a buffer, and update the state accordingly
177 */
178
179 static int
180 s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
181 {
182         int timeout = chan->load_timeout;
183         int took;
184
185         if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
186                 printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
187                 return 0;
188         }
189
190         if (chan->stats != NULL)
191                 chan->stats->loads++;
192
193         while (--timeout > 0) {
194                 if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
195                         took = chan->load_timeout - timeout;
196
197                         s3c2410_dma_stats_timeout(chan->stats, took);
198
199                         switch (chan->load_state) {
200                         case S3C2410_DMALOAD_1LOADED:
201                                 chan->load_state = S3C2410_DMALOAD_1RUNNING;
202                                 break;
203
204                         default:
205                                 printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
206                         }
207
208                         return 1;
209                 }
210         }
211
212         if (chan->stats != NULL) {
213                 chan->stats->timeout_failed++;
214         }
215
216         return 0;
217 }
218
219
220
221 /* s3c2410_dma_loadbuffer
222  *
223  * load a buffer, and update the channel state
224 */
225
226 static inline int
227 s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
228                        struct s3c2410_dma_buf *buf)
229 {
230         unsigned long reload;
231
232         pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
233                  buf, (unsigned long)buf->data, buf->size);
234
235         if (buf == NULL) {
236                 dmawarn("buffer is NULL\n");
237                 return -EINVAL;
238         }
239
240         /* check the state of the channel before we do anything */
241
242         if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
243                 dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
244         }
245
246         if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
247                 dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
248         }
249
250         /* it would seem sensible if we are the last buffer to not bother
251          * with the auto-reload bit, so that the DMA engine will not try
252          * and load another transfer after this one has finished...
253          */
254         if (chan->load_state == S3C2410_DMALOAD_NONE) {
255                 pr_debug("load_state is none, checking for noreload (next=%p)\n",
256                          buf->next);
257                 reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
258         } else {
259                 //pr_debug("load_state is %d => autoreload\n", chan->load_state);
260                 reload = S3C2410_DCON_AUTORELOAD;
261         }
262
263         if ((buf->data & 0xf0000000) != 0x30000000) {
264                 dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
265         }
266
267         writel(buf->data, chan->addr_reg);
268
269         dma_wrreg(chan, S3C2410_DMA_DCON,
270                   chan->dcon | reload | (buf->size/chan->xfer_unit));
271
272         chan->next = buf->next;
273
274         /* update the state of the channel */
275
276         switch (chan->load_state) {
277         case S3C2410_DMALOAD_NONE:
278                 chan->load_state = S3C2410_DMALOAD_1LOADED;
279                 break;
280
281         case S3C2410_DMALOAD_1RUNNING:
282                 chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
283                 break;
284
285         default:
286                 dmawarn("dmaload: unknown state %d in loadbuffer\n",
287                         chan->load_state);
288                 break;
289         }
290
291         return 0;
292 }
293
294 /* s3c2410_dma_call_op
295  *
296  * small routine to call the op routine with the given op if it has been
297  * registered
298 */
299
300 static void
301 s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
302 {
303         if (chan->op_fn != NULL) {
304                 (chan->op_fn)(chan, op);
305         }
306 }
307
308 /* s3c2410_dma_buffdone
309  *
310  * small wrapper to check if callback routine needs to be called, and
311  * if so, call it
312 */
313
314 static inline void
315 s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
316                      enum s3c2410_dma_buffresult result)
317 {
318 #if 0
319         pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
320                  chan->callback_fn, buf, buf->id, buf->size, result);
321 #endif
322
323         if (chan->callback_fn != NULL) {
324                 (chan->callback_fn)(chan, buf->id, buf->size, result);
325         }
326 }
327
328 /* s3c2410_dma_start
329  *
330  * start a dma channel going
331 */
332
333 static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
334 {
335         unsigned long tmp;
336         unsigned long flags;
337
338         pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
339
340         local_irq_save(flags);
341
342         if (chan->state == S3C2410_DMA_RUNNING) {
343                 pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
344                 local_irq_restore(flags);
345                 return 0;
346         }
347
348         chan->state = S3C2410_DMA_RUNNING;
349
350         /* check wether there is anything to load, and if not, see
351          * if we can find anything to load
352          */
353
354         if (chan->load_state == S3C2410_DMALOAD_NONE) {
355                 if (chan->next == NULL) {
356                         printk(KERN_ERR "dma%d: channel has nothing loaded\n",
357                                chan->number);
358                         chan->state = S3C2410_DMA_IDLE;
359                         local_irq_restore(flags);
360                         return -EINVAL;
361                 }
362
363                 s3c2410_dma_loadbuffer(chan, chan->next);
364         }
365
366         dbg_showchan(chan);
367
368         /* enable the channel */
369
370         if (!chan->irq_enabled) {
371                 enable_irq(chan->irq);
372                 chan->irq_enabled = 1;
373         }
374
375         /* start the channel going */
376
377         tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
378         tmp &= ~S3C2410_DMASKTRIG_STOP;
379         tmp |= S3C2410_DMASKTRIG_ON;
380         dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
381
382         pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
383
384 #if 0
385         /* the dma buffer loads should take care of clearing the AUTO
386          * reloading feature */
387         tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
388         tmp &= ~S3C2410_DCON_NORELOAD;
389         dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
390 #endif
391
392         s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
393
394         dbg_showchan(chan);
395
396         /* if we've only loaded one buffer onto the channel, then chec
397          * to see if we have another, and if so, try and load it so when
398          * the first buffer is finished, the new one will be loaded onto
399          * the channel */
400
401         if (chan->next != NULL) {
402                 if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
403
404                         if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
405                                 pr_debug("%s: buff not yet loaded, no more todo\n",
406                                          __func__);
407                         } else {
408                                 chan->load_state = S3C2410_DMALOAD_1RUNNING;
409                                 s3c2410_dma_loadbuffer(chan, chan->next);
410                         }
411
412                 } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
413                         s3c2410_dma_loadbuffer(chan, chan->next);
414                 }
415         }
416
417
418         local_irq_restore(flags);
419
420         return 0;
421 }
422
423 /* s3c2410_dma_canload
424  *
425  * work out if we can queue another buffer into the DMA engine
426 */
427
428 static int
429 s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
430 {
431         if (chan->load_state == S3C2410_DMALOAD_NONE ||
432             chan->load_state == S3C2410_DMALOAD_1RUNNING)
433                 return 1;
434
435         return 0;
436 }
437
438 /* s3c2410_dma_enqueue
439  *
440  * queue an given buffer for dma transfer.
441  *
442  * id         the device driver's id information for this buffer
443  * data       the physical address of the buffer data
444  * size       the size of the buffer in bytes
445  *
446  * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
447  * is checked, and if set, the channel is started. If this flag isn't set,
448  * then an error will be returned.
449  *
450  * It is possible to queue more than one DMA buffer onto a channel at
451  * once, and the code will deal with the re-loading of the next buffer
452  * when necessary.
453 */
454
455 int s3c2410_dma_enqueue(unsigned int channel, void *id,
456                         dma_addr_t data, int size)
457 {
458         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
459         struct s3c2410_dma_buf *buf;
460         unsigned long flags;
461
462         if (chan == NULL)
463                 return -EINVAL;
464
465         pr_debug("%s: id=%p, data=%08x, size=%d\n",
466                  __func__, id, (unsigned int)data, size);
467
468         buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
469         if (buf == NULL) {
470                 pr_debug("%s: out of memory (%ld alloc)\n",
471                          __func__, (long)sizeof(*buf));
472                 return -ENOMEM;
473         }
474
475         //pr_debug("%s: new buffer %p\n", __func__, buf);
476         //dbg_showchan(chan);
477
478         buf->next  = NULL;
479         buf->data  = buf->ptr = data;
480         buf->size  = size;
481         buf->id    = id;
482         buf->magic = BUF_MAGIC;
483
484         local_irq_save(flags);
485
486         if (chan->curr == NULL) {
487                 /* we've got nothing loaded... */
488                 pr_debug("%s: buffer %p queued onto empty channel\n",
489                          __func__, buf);
490
491                 chan->curr = buf;
492                 chan->end  = buf;
493                 chan->next = NULL;
494         } else {
495                 pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
496                          chan->number, __func__, buf);
497
498                 if (chan->end == NULL)
499                         pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
500                                  chan->number, __func__, chan);
501
502                 chan->end->next = buf;
503                 chan->end = buf;
504         }
505
506         /* if necessary, update the next buffer field */
507         if (chan->next == NULL)
508                 chan->next = buf;
509
510         /* check to see if we can load a buffer */
511         if (chan->state == S3C2410_DMA_RUNNING) {
512                 if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
513                         if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
514                                 printk(KERN_ERR "dma%d: loadbuffer:"
515                                        "timeout loading buffer\n",
516                                        chan->number);
517                                 dbg_showchan(chan);
518                                 local_irq_restore(flags);
519                                 return -EINVAL;
520                         }
521                 }
522
523                 while (s3c2410_dma_canload(chan) && chan->next != NULL) {
524                         s3c2410_dma_loadbuffer(chan, chan->next);
525                 }
526         } else if (chan->state == S3C2410_DMA_IDLE) {
527                 if (chan->flags & S3C2410_DMAF_AUTOSTART) {
528                         s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
529                                          S3C2410_DMAOP_START);
530                 }
531         }
532
533         local_irq_restore(flags);
534         return 0;
535 }
536
537 EXPORT_SYMBOL(s3c2410_dma_enqueue);
538
539 static inline void
540 s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
541 {
542         int magicok = (buf->magic == BUF_MAGIC);
543
544         buf->magic = -1;
545
546         if (magicok) {
547                 kmem_cache_free(dma_kmem, buf);
548         } else {
549                 printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
550         }
551 }
552
553 /* s3c2410_dma_lastxfer
554  *
555  * called when the system is out of buffers, to ensure that the channel
556  * is prepared for shutdown.
557 */
558
559 static inline void
560 s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
561 {
562 #if 0
563         pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
564                  chan->number, chan->load_state);
565 #endif
566
567         switch (chan->load_state) {
568         case S3C2410_DMALOAD_NONE:
569                 break;
570
571         case S3C2410_DMALOAD_1LOADED:
572                 if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
573                                 /* flag error? */
574                         printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
575                                chan->number, __func__);
576                         return;
577                 }
578                 break;
579
580         case S3C2410_DMALOAD_1LOADED_1RUNNING:
581                 /* I belive in this case we do not have anything to do
582                  * until the next buffer comes along, and we turn off the
583                  * reload */
584                 return;
585
586         default:
587                 pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
588                          chan->number, chan->load_state);
589                 return;
590
591         }
592
593         /* hopefully this'll shut the damned thing up after the transfer... */
594         dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
595 }
596
597
598 #define dmadbg2(x...)
599
600 static irqreturn_t
601 s3c2410_dma_irq(int irq, void *devpw)
602 {
603         struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
604         struct s3c2410_dma_buf  *buf;
605
606         buf = chan->curr;
607
608         dbg_showchan(chan);
609
610         /* modify the channel state */
611
612         switch (chan->load_state) {
613         case S3C2410_DMALOAD_1RUNNING:
614                 /* TODO - if we are running only one buffer, we probably
615                  * want to reload here, and then worry about the buffer
616                  * callback */
617
618                 chan->load_state = S3C2410_DMALOAD_NONE;
619                 break;
620
621         case S3C2410_DMALOAD_1LOADED:
622                 /* iirc, we should go back to NONE loaded here, we
623                  * had a buffer, and it was never verified as being
624                  * loaded.
625                  */
626
627                 chan->load_state = S3C2410_DMALOAD_NONE;
628                 break;
629
630         case S3C2410_DMALOAD_1LOADED_1RUNNING:
631                 /* we'll worry about checking to see if another buffer is
632                  * ready after we've called back the owner. This should
633                  * ensure we do not wait around too long for the DMA
634                  * engine to start the next transfer
635                  */
636
637                 chan->load_state = S3C2410_DMALOAD_1LOADED;
638                 break;
639
640         case S3C2410_DMALOAD_NONE:
641                 printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
642                        chan->number);
643                 break;
644
645         default:
646                 printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
647                        chan->number, chan->load_state);
648                 break;
649         }
650
651         if (buf != NULL) {
652                 /* update the chain to make sure that if we load any more
653                  * buffers when we call the callback function, things should
654                  * work properly */
655
656                 chan->curr = buf->next;
657                 buf->next  = NULL;
658
659                 if (buf->magic != BUF_MAGIC) {
660                         printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
661                                chan->number, __func__, buf);
662                         return IRQ_HANDLED;
663                 }
664
665                 s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
666
667                 /* free resouces */
668                 s3c2410_dma_freebuf(buf);
669         } else {
670         }
671
672         /* only reload if the channel is still running... our buffer done
673          * routine may have altered the state by requesting the dma channel
674          * to stop or shutdown... */
675
676         /* todo: check that when the channel is shut-down from inside this
677          * function, we cope with unsetting reload, etc */
678
679         if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
680                 unsigned long flags;
681
682                 switch (chan->load_state) {
683                 case S3C2410_DMALOAD_1RUNNING:
684                         /* don't need to do anything for this state */
685                         break;
686
687                 case S3C2410_DMALOAD_NONE:
688                         /* can load buffer immediately */
689                         break;
690
691                 case S3C2410_DMALOAD_1LOADED:
692                         if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
693                                 /* flag error? */
694                                 printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
695                                        chan->number, __func__);
696                                 return IRQ_HANDLED;
697                         }
698
699                         break;
700
701                 case S3C2410_DMALOAD_1LOADED_1RUNNING:
702                         goto no_load;
703
704                 default:
705                         printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
706                                chan->number, chan->load_state);
707                         return IRQ_HANDLED;
708                 }
709
710                 local_irq_save(flags);
711                 s3c2410_dma_loadbuffer(chan, chan->next);
712                 local_irq_restore(flags);
713         } else {
714                 s3c2410_dma_lastxfer(chan);
715
716                 /* see if we can stop this channel.. */
717                 if (chan->load_state == S3C2410_DMALOAD_NONE) {
718                         pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
719                                  chan->number, jiffies);
720                         s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
721                                          S3C2410_DMAOP_STOP);
722                 }
723         }
724
725  no_load:
726         return IRQ_HANDLED;
727 }
728
729 static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
730
731 /* s3c2410_request_dma
732  *
733  * get control of an dma channel
734 */
735
736 int s3c2410_dma_request(unsigned int channel,
737                         struct s3c2410_dma_client *client,
738                         void *dev)
739 {
740         struct s3c2410_dma_chan *chan;
741         unsigned long flags;
742         int err;
743
744         pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
745                  channel, client->name, dev);
746
747         local_irq_save(flags);
748
749         chan = s3c2410_dma_map_channel(channel);
750         if (chan == NULL) {
751                 local_irq_restore(flags);
752                 return -EBUSY;
753         }
754
755         dbg_showchan(chan);
756
757         chan->client = client;
758         chan->in_use = 1;
759
760         if (!chan->irq_claimed) {
761                 pr_debug("dma%d: %s : requesting irq %d\n",
762                          channel, __func__, chan->irq);
763
764                 chan->irq_claimed = 1;
765                 local_irq_restore(flags);
766
767                 err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
768                                   client->name, (void *)chan);
769
770                 local_irq_save(flags);
771
772                 if (err) {
773                         chan->in_use = 0;
774                         chan->irq_claimed = 0;
775                         local_irq_restore(flags);
776
777                         printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
778                                client->name, chan->irq, chan->number);
779                         return err;
780                 }
781
782                 chan->irq_enabled = 1;
783         }
784
785         local_irq_restore(flags);
786
787         /* need to setup */
788
789         pr_debug("%s: channel initialised, %p\n", __func__, chan);
790
791         return chan->number | DMACH_LOW_LEVEL;
792 }
793
794 EXPORT_SYMBOL(s3c2410_dma_request);
795
796 /* s3c2410_dma_free
797  *
798  * release the given channel back to the system, will stop and flush
799  * any outstanding transfers, and ensure the channel is ready for the
800  * next claimant.
801  *
802  * Note, although a warning is currently printed if the freeing client
803  * info is not the same as the registrant's client info, the free is still
804  * allowed to go through.
805 */
806
807 int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
808 {
809         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
810         unsigned long flags;
811
812         if (chan == NULL)
813                 return -EINVAL;
814
815         local_irq_save(flags);
816
817         if (chan->client != client) {
818                 printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
819                        channel, chan->client, client);
820         }
821
822         /* sort out stopping and freeing the channel */
823
824         if (chan->state != S3C2410_DMA_IDLE) {
825                 pr_debug("%s: need to stop dma channel %p\n",
826                        __func__, chan);
827
828                 /* possibly flush the channel */
829                 s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
830         }
831
832         chan->client = NULL;
833         chan->in_use = 0;
834
835         if (chan->irq_claimed)
836                 free_irq(chan->irq, (void *)chan);
837
838         chan->irq_claimed = 0;
839
840         if (!(channel & DMACH_LOW_LEVEL))
841                 dma_chan_map[channel] = NULL;
842
843         local_irq_restore(flags);
844
845         return 0;
846 }
847
848 EXPORT_SYMBOL(s3c2410_dma_free);
849
850 static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
851 {
852         unsigned long flags;
853         unsigned long tmp;
854
855         pr_debug("%s:\n", __func__);
856
857         dbg_showchan(chan);
858
859         local_irq_save(flags);
860
861         s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
862
863         tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
864         tmp |= S3C2410_DMASKTRIG_STOP;
865         //tmp &= ~S3C2410_DMASKTRIG_ON;
866         dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
867
868 #if 0
869         /* should also clear interrupts, according to WinCE BSP */
870         tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
871         tmp |= S3C2410_DCON_NORELOAD;
872         dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
873 #endif
874
875         /* should stop do this, or should we wait for flush? */
876         chan->state      = S3C2410_DMA_IDLE;
877         chan->load_state = S3C2410_DMALOAD_NONE;
878
879         local_irq_restore(flags);
880
881         return 0;
882 }
883
884 static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
885 {
886         unsigned long tmp;
887         unsigned int timeout = 0x10000;
888
889         while (timeout-- > 0) {
890                 tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
891
892                 if (!(tmp & S3C2410_DMASKTRIG_ON))
893                         return;
894         }
895
896         pr_debug("dma%d: failed to stop?\n", chan->number);
897 }
898
899
900 /* s3c2410_dma_flush
901  *
902  * stop the channel, and remove all current and pending transfers
903 */
904
905 static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
906 {
907         struct s3c2410_dma_buf *buf, *next;
908         unsigned long flags;
909
910         pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
911
912         dbg_showchan(chan);
913
914         local_irq_save(flags);
915
916         if (chan->state != S3C2410_DMA_IDLE) {
917                 pr_debug("%s: stopping channel...\n", __func__ );
918                 s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
919         }
920
921         buf = chan->curr;
922         if (buf == NULL)
923                 buf = chan->next;
924
925         chan->curr = chan->next = chan->end = NULL;
926
927         if (buf != NULL) {
928                 for ( ; buf != NULL; buf = next) {
929                         next = buf->next;
930
931                         pr_debug("%s: free buffer %p, next %p\n",
932                                __func__, buf, buf->next);
933
934                         s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
935                         s3c2410_dma_freebuf(buf);
936                 }
937         }
938
939         dbg_showregs(chan);
940
941         s3c2410_dma_waitforstop(chan);
942
943 #if 0
944         /* should also clear interrupts, according to WinCE BSP */
945         {
946                 unsigned long tmp;
947
948                 tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
949                 tmp |= S3C2410_DCON_NORELOAD;
950                 dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
951         }
952 #endif
953
954         dbg_showregs(chan);
955
956         local_irq_restore(flags);
957
958         return 0;
959 }
960
961 static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
962 {
963         unsigned long flags;
964
965         local_irq_save(flags);
966
967         dbg_showchan(chan);
968
969         /* if we've only loaded one buffer onto the channel, then chec
970          * to see if we have another, and if so, try and load it so when
971          * the first buffer is finished, the new one will be loaded onto
972          * the channel */
973
974         if (chan->next != NULL) {
975                 if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
976
977                         if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
978                                 pr_debug("%s: buff not yet loaded, no more todo\n",
979                                          __func__);
980                         } else {
981                                 chan->load_state = S3C2410_DMALOAD_1RUNNING;
982                                 s3c2410_dma_loadbuffer(chan, chan->next);
983                         }
984
985                 } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
986                         s3c2410_dma_loadbuffer(chan, chan->next);
987                 }
988         }
989
990
991         local_irq_restore(flags);
992
993         return 0;
994
995 }
996
997 int
998 s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
999 {
1000         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
1001
1002         if (chan == NULL)
1003                 return -EINVAL;
1004
1005         switch (op) {
1006         case S3C2410_DMAOP_START:
1007                 return s3c2410_dma_start(chan);
1008
1009         case S3C2410_DMAOP_STOP:
1010                 return s3c2410_dma_dostop(chan);
1011
1012         case S3C2410_DMAOP_PAUSE:
1013         case S3C2410_DMAOP_RESUME:
1014                 return -ENOENT;
1015
1016         case S3C2410_DMAOP_FLUSH:
1017                 return s3c2410_dma_flush(chan);
1018
1019         case S3C2410_DMAOP_STARTED:
1020                 return s3c2410_dma_started(chan);
1021
1022         case S3C2410_DMAOP_TIMEOUT:
1023                 return 0;
1024
1025         }
1026
1027         return -ENOENT;      /* unknown, don't bother */
1028 }
1029
1030 EXPORT_SYMBOL(s3c2410_dma_ctrl);
1031
1032 /* DMA configuration for each channel
1033  *
1034  * DISRCC -> source of the DMA (AHB,APB)
1035  * DISRC  -> source address of the DMA
1036  * DIDSTC -> destination of the DMA (AHB,APD)
1037  * DIDST  -> destination address of the DMA
1038 */
1039
1040 /* s3c2410_dma_config
1041  *
1042  * xfersize:     size of unit in bytes (1,2,4)
1043  * dcon:         base value of the DCONx register
1044 */
1045
1046 int s3c2410_dma_config(dmach_t channel,
1047                        int xferunit,
1048                        int dcon)
1049 {
1050         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
1051
1052         pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
1053                  __func__, channel, xferunit, dcon);
1054
1055         if (chan == NULL)
1056                 return -EINVAL;
1057
1058         pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
1059
1060         dcon |= chan->dcon & dma_sel.dcon_mask;
1061
1062         pr_debug("%s: New dcon is %08x\n", __func__, dcon);
1063
1064         switch (xferunit) {
1065         case 1:
1066                 dcon |= S3C2410_DCON_BYTE;
1067                 break;
1068
1069         case 2:
1070                 dcon |= S3C2410_DCON_HALFWORD;
1071                 break;
1072
1073         case 4:
1074                 dcon |= S3C2410_DCON_WORD;
1075                 break;
1076
1077         default:
1078                 pr_debug("%s: bad transfer size %d\n", __func__, xferunit);
1079                 return -EINVAL;
1080         }
1081
1082         dcon |= S3C2410_DCON_HWTRIG;
1083         dcon |= S3C2410_DCON_INTREQ;
1084
1085         pr_debug("%s: dcon now %08x\n", __func__, dcon);
1086
1087         chan->dcon = dcon;
1088         chan->xfer_unit = xferunit;
1089
1090         return 0;
1091 }
1092
1093 EXPORT_SYMBOL(s3c2410_dma_config);
1094
1095 int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
1096 {
1097         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
1098
1099         if (chan == NULL)
1100                 return -EINVAL;
1101
1102         pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
1103
1104         chan->flags = flags;
1105
1106         return 0;
1107 }
1108
1109 EXPORT_SYMBOL(s3c2410_dma_setflags);
1110
1111
1112 /* do we need to protect the settings of the fields from
1113  * irq?
1114 */
1115
1116 int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
1117 {
1118         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
1119
1120         if (chan == NULL)
1121                 return -EINVAL;
1122
1123         pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
1124
1125         chan->op_fn = rtn;
1126
1127         return 0;
1128 }
1129
1130 EXPORT_SYMBOL(s3c2410_dma_set_opfn);
1131
1132 int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
1133 {
1134         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
1135
1136         if (chan == NULL)
1137                 return -EINVAL;
1138
1139         pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
1140
1141         chan->callback_fn = rtn;
1142
1143         return 0;
1144 }
1145
1146 EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
1147
1148 /* s3c2410_dma_devconfig
1149  *
1150  * configure the dma source/destination hardware type and address
1151  *
1152  * source:    S3C2410_DMASRC_HW: source is hardware
1153  *            S3C2410_DMASRC_MEM: source is memory
1154  *
1155  * hwcfg:     the value for xxxSTCn register,
1156  *            bit 0: 0=increment pointer, 1=leave pointer
1157  *            bit 1: 0=source is AHB, 1=source is APB
1158  *
1159  * devaddr:   physical address of the source
1160 */
1161
1162 int s3c2410_dma_devconfig(int channel,
1163                           enum s3c2410_dmasrc source,
1164                           int hwcfg,
1165                           unsigned long devaddr)
1166 {
1167         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
1168
1169         if (chan == NULL)
1170                 return -EINVAL;
1171
1172         pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
1173                  __func__, (int)source, hwcfg, devaddr);
1174
1175         chan->source = source;
1176         chan->dev_addr = devaddr;
1177         chan->hw_cfg = hwcfg;
1178
1179         switch (source) {
1180         case S3C2410_DMASRC_HW:
1181                 /* source is hardware */
1182                 pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
1183                          __func__, devaddr, hwcfg);
1184                 dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
1185                 dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
1186                 dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
1187
1188                 chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
1189                 break;
1190
1191         case S3C2410_DMASRC_MEM:
1192                 /* source is memory */
1193                 pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
1194                          __func__, devaddr, hwcfg);
1195                 dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
1196                 dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
1197                 dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
1198
1199                 chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
1200                 break;
1201
1202         default:
1203                 printk(KERN_ERR "dma%d: invalid source type (%d)\n",
1204                        channel, source);
1205
1206                 return -EINVAL;
1207         }
1208
1209         if (dma_sel.direction != NULL)
1210                 (dma_sel.direction)(chan, chan->map, source);
1211
1212         return 0;
1213 }
1214
1215 EXPORT_SYMBOL(s3c2410_dma_devconfig);
1216
1217 /* s3c2410_dma_getposition
1218  *
1219  * returns the current transfer points for the dma source and destination
1220 */
1221
1222 int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
1223 {
1224         struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
1225
1226         if (chan == NULL)
1227                 return -EINVAL;
1228
1229         if (src != NULL)
1230                 *src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
1231
1232         if (dst != NULL)
1233                 *dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
1234
1235         return 0;
1236 }
1237
1238 EXPORT_SYMBOL(s3c2410_dma_getposition);
1239
1240 static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
1241 {
1242         return container_of(dev, struct s3c2410_dma_chan, dev);
1243 }
1244
1245 /* system device class */
1246
1247 #ifdef CONFIG_PM
1248
1249 static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
1250 {
1251         struct s3c2410_dma_chan *cp = to_dma_chan(dev);
1252
1253         printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
1254
1255         if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
1256                 /* the dma channel is still working, which is probably
1257                  * a bad thing to do over suspend/resume. We stop the
1258                  * channel and assume that the client is either going to
1259                  * retry after resume, or that it is broken.
1260                  */
1261
1262                 printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
1263                        cp->number);
1264
1265                 s3c2410_dma_dostop(cp);
1266         }
1267
1268         return 0;
1269 }
1270
1271 static int s3c2410_dma_resume(struct sys_device *dev)
1272 {
1273         struct s3c2410_dma_chan *cp = to_dma_chan(dev);
1274         unsigned int no = cp->number | DMACH_LOW_LEVEL;
1275
1276         /* restore channel's hardware configuration */
1277
1278         if (!cp->in_use)
1279                 return 0;
1280
1281         printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
1282
1283         s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
1284         s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
1285
1286         /* re-select the dma source for this channel */
1287
1288         if (cp->map != NULL)
1289                 dma_sel.select(cp, cp->map);
1290
1291         return 0;
1292 }
1293
1294 #else
1295 #define s3c2410_dma_suspend NULL
1296 #define s3c2410_dma_resume  NULL
1297 #endif /* CONFIG_PM */
1298
1299 struct sysdev_class dma_sysclass = {
1300         .name           = "s3c24xx-dma",
1301         .suspend        = s3c2410_dma_suspend,
1302         .resume         = s3c2410_dma_resume,
1303 };
1304
1305 /* kmem cache implementation */
1306
1307 static void s3c2410_dma_cache_ctor(void *p)
1308 {
1309         memset(p, 0, sizeof(struct s3c2410_dma_buf));
1310 }
1311
1312 /* initialisation code */
1313
1314 static int __init s3c24xx_dma_sysclass_init(void)
1315 {
1316         int ret = sysdev_class_register(&dma_sysclass);
1317
1318         if (ret != 0)
1319                 printk(KERN_ERR "dma sysclass registration failed\n");
1320
1321         return ret;
1322 }
1323
1324 core_initcall(s3c24xx_dma_sysclass_init);
1325
1326 static int __init s3c24xx_dma_sysdev_register(void)
1327 {
1328         struct s3c2410_dma_chan *cp = s3c2410_chans;
1329         int channel, ret;
1330
1331         for (channel = 0; channel < dma_channels; cp++, channel++) {
1332                 cp->dev.cls = &dma_sysclass;
1333                 cp->dev.id  = channel;
1334                 ret = sysdev_register(&cp->dev);
1335
1336                 if (ret) {
1337                         printk(KERN_ERR "error registering dev for dma %d\n",
1338                                channel);
1339                         return ret;
1340                 }
1341         }
1342
1343         return 0;
1344 }
1345
1346 late_initcall(s3c24xx_dma_sysdev_register);
1347
1348 int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
1349                             unsigned int stride)
1350 {
1351         struct s3c2410_dma_chan *cp;
1352         int channel;
1353         int ret;
1354
1355         printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
1356
1357         dma_channels = channels;
1358
1359         dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
1360         if (dma_base == NULL) {
1361                 printk(KERN_ERR "dma failed to remap register block\n");
1362                 return -ENOMEM;
1363         }
1364
1365         dma_kmem = kmem_cache_create("dma_desc",
1366                                      sizeof(struct s3c2410_dma_buf), 0,
1367                                      SLAB_HWCACHE_ALIGN,
1368                                      s3c2410_dma_cache_ctor);
1369
1370         if (dma_kmem == NULL) {
1371                 printk(KERN_ERR "dma failed to make kmem cache\n");
1372                 ret = -ENOMEM;
1373                 goto err;
1374         }
1375
1376         for (channel = 0; channel < channels;  channel++) {
1377                 cp = &s3c2410_chans[channel];
1378
1379                 memset(cp, 0, sizeof(struct s3c2410_dma_chan));
1380
1381                 /* dma channel irqs are in order.. */
1382                 cp->number = channel;
1383                 cp->irq    = channel + irq;
1384                 cp->regs   = dma_base + (channel * stride);
1385
1386                 /* point current stats somewhere */
1387                 cp->stats  = &cp->stats_store;
1388                 cp->stats_store.timeout_shortest = LONG_MAX;
1389
1390                 /* basic channel configuration */
1391
1392                 cp->load_timeout = 1<<18;
1393
1394                 printk("DMA channel %d at %p, irq %d\n",
1395                        cp->number, cp->regs, cp->irq);
1396         }
1397
1398         return 0;
1399
1400  err:
1401         kmem_cache_destroy(dma_kmem);
1402         iounmap(dma_base);
1403         dma_base = NULL;
1404         return ret;
1405 }
1406
1407 int __init s3c2410_dma_init(void)
1408 {
1409         return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
1410 }
1411
1412 static inline int is_channel_valid(unsigned int channel)
1413 {
1414         return (channel & DMA_CH_VALID);
1415 }
1416
1417 static struct s3c24xx_dma_order *dma_order;
1418
1419
1420 /* s3c2410_dma_map_channel()
1421  *
1422  * turn the virtual channel number into a real, and un-used hardware
1423  * channel.
1424  *
1425  * first, try the dma ordering given to us by either the relevant
1426  * dma code, or the board. Then just find the first usable free
1427  * channel
1428 */
1429
1430 static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
1431 {
1432         struct s3c24xx_dma_order_ch *ord = NULL;
1433         struct s3c24xx_dma_map *ch_map;
1434         struct s3c2410_dma_chan *dmach;
1435         int ch;
1436
1437         if (dma_sel.map == NULL || channel > dma_sel.map_size)
1438                 return NULL;
1439
1440         ch_map = dma_sel.map + channel;
1441
1442         /* first, try the board mapping */
1443
1444         if (dma_order) {
1445                 ord = &dma_order->channels[channel];
1446
1447                 for (ch = 0; ch < dma_channels; ch++) {
1448                         if (!is_channel_valid(ord->list[ch]))
1449                                 continue;
1450
1451                         if (s3c2410_chans[ord->list[ch]].in_use == 0) {
1452                                 ch = ord->list[ch] & ~DMA_CH_VALID;
1453                                 goto found;
1454                         }
1455                 }
1456
1457                 if (ord->flags & DMA_CH_NEVER)
1458                         return NULL;
1459         }
1460
1461         /* second, search the channel map for first free */
1462
1463         for (ch = 0; ch < dma_channels; ch++) {
1464                 if (!is_channel_valid(ch_map->channels[ch]))
1465                         continue;
1466
1467                 if (s3c2410_chans[ch].in_use == 0) {
1468                         printk("mapped channel %d to %d\n", channel, ch);
1469                         break;
1470                 }
1471         }
1472
1473         if (ch >= dma_channels)
1474                 return NULL;
1475
1476         /* update our channel mapping */
1477
1478  found:
1479         dmach = &s3c2410_chans[ch];
1480         dmach->map = ch_map;
1481         dma_chan_map[channel] = dmach;
1482
1483         /* select the channel */
1484
1485         (dma_sel.select)(dmach, ch_map);
1486
1487         return dmach;
1488 }
1489
1490 static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
1491 {
1492         return 0;
1493 }
1494
1495 int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
1496 {
1497         struct s3c24xx_dma_map *nmap;
1498         size_t map_sz = sizeof(*nmap) * sel->map_size;
1499         int ptr;
1500
1501         nmap = kmalloc(map_sz, GFP_KERNEL);
1502         if (nmap == NULL)
1503                 return -ENOMEM;
1504
1505         memcpy(nmap, sel->map, map_sz);
1506         memcpy(&dma_sel, sel, sizeof(*sel));
1507
1508         dma_sel.map = nmap;
1509
1510         for (ptr = 0; ptr < sel->map_size; ptr++)
1511                 s3c24xx_dma_check_entry(nmap+ptr, ptr);
1512
1513         return 0;
1514 }
1515
1516 int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
1517 {
1518         struct s3c24xx_dma_order *nord = dma_order;
1519
1520         if (nord == NULL)
1521                 nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
1522
1523         if (nord == NULL) {
1524                 printk(KERN_ERR "no memory to store dma channel order\n");
1525                 return -ENOMEM;
1526         }
1527
1528         dma_order = nord;
1529         memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
1530         return 0;
1531 }