git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-versatile/core.c

   1 /*
   2  *  linux/arch/arm/mach-versatile/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/init.h>
  22 #include <linux/device.h>
  23 #include <linux/dma-mapping.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/sysdev.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/amba/bus.h>
  28 #include <linux/amba/clcd.h>
  29 #include <linux/clocksource.h>
  30 #include <linux/clockchips.h>
  31 #include <linux/cnt32_to_63.h>
  32 #include <linux/io.h>
  33
  34 #include <asm/clkdev.h>
  35 #include <asm/system.h>
  36 #include <mach/hardware.h>
  37 #include <asm/irq.h>
  38 #include <asm/leds.h>
  39 #include <asm/hardware/arm_timer.h>
  40 #include <asm/hardware/icst307.h>
  41 #include <asm/hardware/vic.h>
  42 #include <asm/mach-types.h>
  43
  44 #include <asm/mach/arch.h>
  45 #include <asm/mach/flash.h>
  46 #include <asm/mach/irq.h>
  47 #include <asm/mach/time.h>
  48 #include <asm/mach/map.h>
  49 #include <asm/mach/mmc.h>
  50
  51 #include "core.h"
  52 #include "clock.h"
  53
  54 /*
  55  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  56  * is the (PA >> 12).
  57  *
  58  * Setup a VA for the Versatile Vectored Interrupt Controller.
  59  */
  60 #define __io_address(n)         __io(IO_ADDRESS(n))
  61 #define VA_VIC_BASE             __io_address(VERSATILE_VIC_BASE)
  62 #define VA_SIC_BASE             __io_address(VERSATILE_SIC_BASE)
  63
  64 static void sic_mask_irq(unsigned int irq)
  65 {
  66         irq -= IRQ_SIC_START;
  67         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
  68 }
  69
  70 static void sic_unmask_irq(unsigned int irq)
  71 {
  72         irq -= IRQ_SIC_START;
  73         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
  74 }
  75
  76 static struct irq_chip sic_chip = {
  77         .name   = "SIC",
  78         .ack    = sic_mask_irq,
  79         .mask   = sic_mask_irq,
  80         .unmask = sic_unmask_irq,
  81 };
  82
  83 static void
  84 sic_handle_irq(unsigned int irq, struct irq_desc *desc)
  85 {
  86         unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
  87
  88         if (status == 0) {
  89                 do_bad_IRQ(irq, desc);
  90                 return;
  91         }
  92
  93         do {
  94                 irq = ffs(status) - 1;
  95                 status &= ~(1 << irq);
  96
  97                 irq += IRQ_SIC_START;
  98
  99                 generic_handle_irq(irq);
 100         } while (status);
 101 }
 102
 103 #if 1
 104 #define IRQ_MMCI0A      IRQ_VICSOURCE22
 105 #define IRQ_AACI        IRQ_VICSOURCE24
 106 #define IRQ_ETH         IRQ_VICSOURCE25
 107 #define PIC_MASK        0xFFD00000
 108 #else
 109 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
 110 #define IRQ_AACI        IRQ_SIC_AACI
 111 #define IRQ_ETH         IRQ_SIC_ETH
 112 #define PIC_MASK        0
 113 #endif
 114
 115 void __init versatile_init_irq(void)
 116 {
 117         unsigned int i;
 118
 119         vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
 120
 121         set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
 122
 123         /* Do second interrupt controller */
 124         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 125
 126         for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
 127                 if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
 128                         set_irq_chip(i, &sic_chip);
 129                         set_irq_handler(i, handle_level_irq);
 130                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 131                 }
 132         }
 133
 134         /*
 135          * Interrupts on secondary controller from 0 to 8 are routed to
 136          * source 31 on PIC.
 137          * Interrupts from 21 to 31 are routed directly to the VIC on
 138          * the corresponding number on primary controller. This is controlled
 139          * by setting PIC_ENABLEx.
 140          */
 141         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 142 }
 143
 144 static struct map_desc versatile_io_desc[] __initdata = {
 145         {
 146                 .virtual        =  IO_ADDRESS(VERSATILE_SYS_BASE),
 147                 .pfn            = __phys_to_pfn(VERSATILE_SYS_BASE),
 148                 .length         = SZ_4K,
 149                 .type           = MT_DEVICE
 150         }, {
 151                 .virtual        =  IO_ADDRESS(VERSATILE_SIC_BASE),
 152                 .pfn            = __phys_to_pfn(VERSATILE_SIC_BASE),
 153                 .length         = SZ_4K,
 154                 .type           = MT_DEVICE
 155         }, {
 156                 .virtual        =  IO_ADDRESS(VERSATILE_VIC_BASE),
 157                 .pfn            = __phys_to_pfn(VERSATILE_VIC_BASE),
 158                 .length         = SZ_4K,
 159                 .type           = MT_DEVICE
 160         }, {
 161                 .virtual        =  IO_ADDRESS(VERSATILE_SCTL_BASE),
 162                 .pfn            = __phys_to_pfn(VERSATILE_SCTL_BASE),
 163                 .length         = SZ_4K * 9,
 164                 .type           = MT_DEVICE
 165         },
 166 #ifdef CONFIG_MACH_VERSATILE_AB
 167         {
 168                 .virtual        =  IO_ADDRESS(VERSATILE_GPIO0_BASE),
 169                 .pfn            = __phys_to_pfn(VERSATILE_GPIO0_BASE),
 170                 .length         = SZ_4K,
 171                 .type           = MT_DEVICE
 172         }, {
 173                 .virtual        =  IO_ADDRESS(VERSATILE_IB2_BASE),
 174                 .pfn            = __phys_to_pfn(VERSATILE_IB2_BASE),
 175                 .length         = SZ_64M,
 176                 .type           = MT_DEVICE
 177         },
 178 #endif
 179 #ifdef CONFIG_DEBUG_LL
 180         {
 181                 .virtual        =  IO_ADDRESS(VERSATILE_UART0_BASE),
 182                 .pfn            = __phys_to_pfn(VERSATILE_UART0_BASE),
 183                 .length         = SZ_4K,
 184                 .type           = MT_DEVICE
 185         },
 186 #endif
 187 #ifdef CONFIG_PCI
 188         {
 189                 .virtual        =  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
 190                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
 191                 .length         = SZ_4K,
 192                 .type           = MT_DEVICE
 193         }, {
 194                 .virtual        =  (unsigned long)VERSATILE_PCI_VIRT_BASE,
 195                 .pfn            = __phys_to_pfn(VERSATILE_PCI_BASE),
 196                 .length         = VERSATILE_PCI_BASE_SIZE,
 197                 .type           = MT_DEVICE
 198         }, {
 199                 .virtual        =  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
 200                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 201                 .length         = VERSATILE_PCI_CFG_BASE_SIZE,
 202                 .type           = MT_DEVICE
 203         },
 204 #if 0
 205         {
 206                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE0,
 207                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
 208                 .length         = SZ_16M,
 209                 .type           = MT_DEVICE
 210         }, {
 211                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE1,
 212                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
 213                 .length         = SZ_16M,
 214                 .type           = MT_DEVICE
 215         }, {
 216                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE2,
 217                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
 218                 .length         = SZ_16M,
 219                 .type           = MT_DEVICE
 220         },
 221 #endif
 222 #endif
 223 };
 224
 225 void __init versatile_map_io(void)
 226 {
 227         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 228 }
 229
 230 #define VERSATILE_REFCOUNTER    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
 231
 232 /*
 233  * This is the Versatile sched_clock implementation.  This has
 234  * a resolution of 41.7ns, and a maximum value of about 35583 days.
 235  *
 236  * The return value is guaranteed to be monotonic in that range as
 237  * long as there is always less than 89 seconds between successive
 238  * calls to this function.
 239  */
 240 unsigned long long sched_clock(void)
 241 {
 242         unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER));
 243
 244         /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
 245         v *= 125<<1;
 246         do_div(v, 3<<1);
 247
 248         return v;
 249 }
 250
 251
 252 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 253
 254 static int versatile_flash_init(void)
 255 {
 256         u32 val;
 257
 258         val = __raw_readl(VERSATILE_FLASHCTRL);
 259         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 260         __raw_writel(val, VERSATILE_FLASHCTRL);
 261
 262         return 0;
 263 }
 264
 265 static void versatile_flash_exit(void)
 266 {
 267         u32 val;
 268
 269         val = __raw_readl(VERSATILE_FLASHCTRL);
 270         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 271         __raw_writel(val, VERSATILE_FLASHCTRL);
 272 }
 273
 274 static void versatile_flash_set_vpp(int on)
 275 {
 276         u32 val;
 277
 278         val = __raw_readl(VERSATILE_FLASHCTRL);
 279         if (on)
 280                 val |= VERSATILE_FLASHPROG_FLVPPEN;
 281         else
 282                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 283         __raw_writel(val, VERSATILE_FLASHCTRL);
 284 }
 285
 286 static struct flash_platform_data versatile_flash_data = {
 287         .map_name               = "cfi_probe",
 288         .width                  = 4,
 289         .init                   = versatile_flash_init,
 290         .exit                   = versatile_flash_exit,
 291         .set_vpp                = versatile_flash_set_vpp,
 292 };
 293
 294 static struct resource versatile_flash_resource = {
 295         .start                  = VERSATILE_FLASH_BASE,
 296         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
 297         .flags                  = IORESOURCE_MEM,
 298 };
 299
 300 static struct platform_device versatile_flash_device = {
 301         .name                   = "armflash",
 302         .id                     = 0,
 303         .dev                    = {
 304                 .platform_data  = &versatile_flash_data,
 305         },
 306         .num_resources          = 1,
 307         .resource               = &versatile_flash_resource,
 308 };
 309
 310 static struct resource smc91x_resources[] = {
 311         [0] = {
 312                 .start          = VERSATILE_ETH_BASE,
 313                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
 314                 .flags          = IORESOURCE_MEM,
 315         },
 316         [1] = {
 317                 .start          = IRQ_ETH,
 318                 .end            = IRQ_ETH,
 319                 .flags          = IORESOURCE_IRQ,
 320         },
 321 };
 322
 323 static struct platform_device smc91x_device = {
 324         .name           = "smc91x",
 325         .id             = 0,
 326         .num_resources  = ARRAY_SIZE(smc91x_resources),
 327         .resource       = smc91x_resources,
 328 };
 329
 330 static struct resource versatile_i2c_resource = {
 331         .start                  = VERSATILE_I2C_BASE,
 332         .end                    = VERSATILE_I2C_BASE + SZ_4K - 1,
 333         .flags                  = IORESOURCE_MEM,
 334 };
 335
 336 static struct platform_device versatile_i2c_device = {
 337         .name                   = "versatile-i2c",
 338         .id                     = -1,
 339         .num_resources          = 1,
 340         .resource               = &versatile_i2c_resource,
 341 };
 342
 343 #define VERSATILE_SYSMCI        (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 344
 345 unsigned int mmc_status(struct device *dev)
 346 {
 347         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 348         u32 mask;
 349
 350         if (adev->res.start == VERSATILE_MMCI0_BASE)
 351                 mask = 1;
 352         else
 353                 mask = 2;
 354
 355         return readl(VERSATILE_SYSMCI) & mask;
 356 }
 357
 358 static struct mmc_platform_data mmc0_plat_data = {
 359         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 360         .status         = mmc_status,
 361 };
 362
 363 /*
 364  * Clock handling
 365  */
 366 static const struct icst307_params versatile_oscvco_params = {
 367         .ref            = 24000,
 368         .vco_max        = 200000,
 369         .vd_min         = 4 + 8,
 370         .vd_max         = 511 + 8,
 371         .rd_min         = 1 + 2,
 372         .rd_max         = 127 + 2,
 373 };
 374
 375 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 376 {
 377         void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
 378         void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET;
 379         u32 val;
 380
 381         val = readl(sys + clk->oscoff) & ~0x7ffff;
 382         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 383
 384         writel(0xa05f, sys_lock);
 385         writel(val, sys + clk->oscoff);
 386         writel(0, sys_lock);
 387 }
 388
 389 static struct clk osc4_clk = {
 390         .params = &versatile_oscvco_params,
 391         .oscoff = VERSATILE_SYS_OSCCLCD_OFFSET,
 392         .setvco = versatile_oscvco_set,
 393 };
 394
 395 /*
 396  * These are fixed clocks.
 397  */
 398 static struct clk ref24_clk = {
 399         .rate   = 24000000,
 400 };
 401
 402 static struct clk_lookup lookups[] __initdata = {
 403         {       /* UART0 */
 404                 .dev_id         = "dev:f1",
 405                 .clk            = &ref24_clk,
 406         }, {    /* UART1 */
 407                 .dev_id         = "dev:f2",
 408                 .clk            = &ref24_clk,
 409         }, {    /* UART2 */
 410                 .dev_id         = "dev:f3",
 411                 .clk            = &ref24_clk,
 412         }, {    /* UART3 */
 413                 .dev_id         = "fpga:09",
 414                 .clk            = &ref24_clk,
 415         }, {    /* KMI0 */
 416                 .dev_id         = "fpga:06",
 417                 .clk            = &ref24_clk,
 418         }, {    /* KMI1 */
 419                 .dev_id         = "fpga:07",
 420                 .clk            = &ref24_clk,
 421         }, {    /* MMC0 */
 422                 .dev_id         = "fpga:05",
 423                 .clk            = &ref24_clk,
 424         }, {    /* MMC1 */
 425                 .dev_id         = "fpga:0b",
 426                 .clk            = &ref24_clk,
 427         }, {    /* CLCD */
 428                 .dev_id         = "dev:20",
 429                 .clk            = &osc4_clk,
 430         }
 431 };
 432
 433 /*
 434  * CLCD support.
 435  */
 436 #define SYS_CLCD_MODE_MASK      (3 << 0)
 437 #define SYS_CLCD_MODE_888       (0 << 0)
 438 #define SYS_CLCD_MODE_5551      (1 << 0)
 439 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
 440 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
 441 #define SYS_CLCD_NLCDIOON       (1 << 2)
 442 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 443 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 444 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 445 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 446 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 447 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 448 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 449 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 450
 451 static struct clcd_panel vga = {
 452         .mode           = {
 453                 .name           = "VGA",
 454                 .refresh        = 60,
 455                 .xres           = 640,
 456                 .yres           = 480,
 457                 .pixclock       = 39721,
 458                 .left_margin    = 40,
 459                 .right_margin   = 24,
 460                 .upper_margin   = 32,
 461                 .lower_margin   = 11,
 462                 .hsync_len      = 96,
 463                 .vsync_len      = 2,
 464                 .sync           = 0,
 465                 .vmode          = FB_VMODE_NONINTERLACED,
 466         },
 467         .width          = -1,
 468         .height         = -1,
 469         .tim2           = TIM2_BCD | TIM2_IPC,
 470         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 471         .bpp            = 16,
 472 };
 473
 474 static struct clcd_panel sanyo_3_8_in = {
 475         .mode           = {
 476                 .name           = "Sanyo QVGA",
 477                 .refresh        = 116,
 478                 .xres           = 320,
 479                 .yres           = 240,
 480                 .pixclock       = 100000,
 481                 .left_margin    = 6,
 482                 .right_margin   = 6,
 483                 .upper_margin   = 5,
 484                 .lower_margin   = 5,
 485                 .hsync_len      = 6,
 486                 .vsync_len      = 6,
 487                 .sync           = 0,
 488                 .vmode          = FB_VMODE_NONINTERLACED,
 489         },
 490         .width          = -1,
 491         .height         = -1,
 492         .tim2           = TIM2_BCD,
 493         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 494         .bpp            = 16,
 495 };
 496
 497 static struct clcd_panel sanyo_2_5_in = {
 498         .mode           = {
 499                 .name           = "Sanyo QVGA Portrait",
 500                 .refresh        = 116,
 501                 .xres           = 240,
 502                 .yres           = 320,
 503                 .pixclock       = 100000,
 504                 .left_margin    = 20,
 505                 .right_margin   = 10,
 506                 .upper_margin   = 2,
 507                 .lower_margin   = 2,
 508                 .hsync_len      = 10,
 509                 .vsync_len      = 2,
 510                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 511                 .vmode          = FB_VMODE_NONINTERLACED,
 512         },
 513         .width          = -1,
 514         .height         = -1,
 515         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 516         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 517         .bpp            = 16,
 518 };
 519
 520 static struct clcd_panel epson_2_2_in = {
 521         .mode           = {
 522                 .name           = "Epson QCIF",
 523                 .refresh        = 390,
 524                 .xres           = 176,
 525                 .yres           = 220,
 526                 .pixclock       = 62500,
 527                 .left_margin    = 3,
 528                 .right_margin   = 2,
 529                 .upper_margin   = 1,
 530                 .lower_margin   = 0,
 531                 .hsync_len      = 3,
 532                 .vsync_len      = 2,
 533                 .sync           = 0,
 534                 .vmode          = FB_VMODE_NONINTERLACED,
 535         },
 536         .width          = -1,
 537         .height         = -1,
 538         .tim2           = TIM2_BCD | TIM2_IPC,
 539         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 540         .bpp            = 16,
 541 };
 542
 543 /*
 544  * Detect which LCD panel is connected, and return the appropriate
 545  * clcd_panel structure.  Note: we do not have any information on
 546  * the required timings for the 8.4in panel, so we presently assume
 547  * VGA timings.
 548  */
 549 static struct clcd_panel *versatile_clcd_panel(void)
 550 {
 551         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 552         struct clcd_panel *panel = &vga;
 553         u32 val;
 554
 555         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 556         if (val == SYS_CLCD_ID_SANYO_3_8)
 557                 panel = &sanyo_3_8_in;
 558         else if (val == SYS_CLCD_ID_SANYO_2_5)
 559                 panel = &sanyo_2_5_in;
 560         else if (val == SYS_CLCD_ID_EPSON_2_2)
 561                 panel = &epson_2_2_in;
 562         else if (val == SYS_CLCD_ID_VGA)
 563                 panel = &vga;
 564         else {
 565                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 566                         val);
 567                 panel = &vga;
 568         }
 569
 570         return panel;
 571 }
 572
 573 /*
 574  * Disable all display connectors on the interface module.
 575  */
 576 static void versatile_clcd_disable(struct clcd_fb *fb)
 577 {
 578         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 579         u32 val;
 580
 581         val = readl(sys_clcd);
 582         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 583         writel(val, sys_clcd);
 584
 585 #ifdef CONFIG_MACH_VERSATILE_AB
 586         /*
 587          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 588          */
 589         if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
 590                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 591                 unsigned long ctrl;
 592
 593                 ctrl = readl(versatile_ib2_ctrl);
 594                 ctrl &= ~0x01;
 595                 writel(ctrl, versatile_ib2_ctrl);
 596         }
 597 #endif
 598 }
 599
 600 /*
 601  * Enable the relevant connector on the interface module.
 602  */
 603 static void versatile_clcd_enable(struct clcd_fb *fb)
 604 {
 605         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 606         u32 val;
 607
 608         val = readl(sys_clcd);
 609         val &= ~SYS_CLCD_MODE_MASK;
 610
 611         switch (fb->fb.var.green.length) {
 612         case 5:
 613                 val |= SYS_CLCD_MODE_5551;
 614                 break;
 615         case 6:
 616                 val |= SYS_CLCD_MODE_565_RLSB;
 617                 break;
 618         case 8:
 619                 val |= SYS_CLCD_MODE_888;
 620                 break;
 621         }
 622
 623         /*
 624          * Set the MUX
 625          */
 626         writel(val, sys_clcd);
 627
 628         /*
 629          * And now enable the PSUs
 630          */
 631         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 632         writel(val, sys_clcd);
 633
 634 #ifdef CONFIG_MACH_VERSATILE_AB
 635         /*
 636          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 637          */
 638         if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
 639                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 640                 unsigned long ctrl;
 641
 642                 ctrl = readl(versatile_ib2_ctrl);
 643                 ctrl |= 0x01;
 644                 writel(ctrl, versatile_ib2_ctrl);
 645         }
 646 #endif
 647 }
 648
 649 static unsigned long framesize = SZ_1M;
 650
 651 static int versatile_clcd_setup(struct clcd_fb *fb)
 652 {
 653         dma_addr_t dma;
 654
 655         fb->panel               = versatile_clcd_panel();
 656
 657         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 658                                                     &dma, GFP_KERNEL);
 659         if (!fb->fb.screen_base) {
 660                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 661                 return -ENOMEM;
 662         }
 663
 664         fb->fb.fix.smem_start   = dma;
 665         fb->fb.fix.smem_len     = framesize;
 666
 667         return 0;
 668 }
 669
 670 static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 671 {
 672         return dma_mmap_writecombine(&fb->dev->dev, vma,
 673                                      fb->fb.screen_base,
 674                                      fb->fb.fix.smem_start,
 675                                      fb->fb.fix.smem_len);
 676 }
 677
 678 static void versatile_clcd_remove(struct clcd_fb *fb)
 679 {
 680         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 681                               fb->fb.screen_base, fb->fb.fix.smem_start);
 682 }
 683
 684 static struct clcd_board clcd_plat_data = {
 685         .name           = "Versatile",
 686         .check          = clcdfb_check,
 687         .decode         = clcdfb_decode,
 688         .disable        = versatile_clcd_disable,
 689         .enable         = versatile_clcd_enable,
 690         .setup          = versatile_clcd_setup,
 691         .mmap           = versatile_clcd_mmap,
 692         .remove         = versatile_clcd_remove,
 693 };
 694
 695 #define AACI_IRQ        { IRQ_AACI, NO_IRQ }
 696 #define AACI_DMA        { 0x80, 0x81 }
 697 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
 698 #define MMCI0_DMA       { 0x84, 0 }
 699 #define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
 700 #define KMI0_DMA        { 0, 0 }
 701 #define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
 702 #define KMI1_DMA        { 0, 0 }
 703
 704 /*
 705  * These devices are connected directly to the multi-layer AHB switch
 706  */
 707 #define SMC_IRQ         { NO_IRQ, NO_IRQ }
 708 #define SMC_DMA         { 0, 0 }
 709 #define MPMC_IRQ        { NO_IRQ, NO_IRQ }
 710 #define MPMC_DMA        { 0, 0 }
 711 #define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
 712 #define CLCD_DMA        { 0, 0 }
 713 #define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
 714 #define DMAC_DMA        { 0, 0 }
 715
 716 /*
 717  * These devices are connected via the core APB bridge
 718  */
 719 #define SCTL_IRQ        { NO_IRQ, NO_IRQ }
 720 #define SCTL_DMA        { 0, 0 }
 721 #define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
 722 #define WATCHDOG_DMA    { 0, 0 }
 723 #define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
 724 #define GPIO0_DMA       { 0, 0 }
 725 #define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
 726 #define GPIO1_DMA       { 0, 0 }
 727 #define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
 728 #define RTC_DMA         { 0, 0 }
 729
 730 /*
 731  * These devices are connected via the DMA APB bridge
 732  */
 733 #define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
 734 #define SCI_DMA         { 7, 6 }
 735 #define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
 736 #define UART0_DMA       { 15, 14 }
 737 #define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
 738 #define UART1_DMA       { 13, 12 }
 739 #define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
 740 #define UART2_DMA       { 11, 10 }
 741 #define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
 742 #define SSP_DMA         { 9, 8 }
 743
 744 /* FPGA Primecells */
 745 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 746 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
 747 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 748 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 749
 750 /* DevChip Primecells */
 751 AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
 752 AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
 753 AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 754 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 755 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 756 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
 757 AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
 758 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
 759 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 760 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 761 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 762 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 763 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
 764 AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
 765
 766 static struct amba_device *amba_devs[] __initdata = {
 767         &dmac_device,
 768         &uart0_device,
 769         &uart1_device,
 770         &uart2_device,
 771         &smc_device,
 772         &mpmc_device,
 773         &clcd_device,
 774         &sctl_device,
 775         &wdog_device,
 776         &gpio0_device,
 777         &gpio1_device,
 778         &rtc_device,
 779         &sci0_device,
 780         &ssp0_device,
 781         &aaci_device,
 782         &mmc0_device,
 783         &kmi0_device,
 784         &kmi1_device,
 785 };
 786
 787 #ifdef CONFIG_LEDS
 788 #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
 789
 790 static void versatile_leds_event(led_event_t ledevt)
 791 {
 792         unsigned long flags;
 793         u32 val;
 794
 795         local_irq_save(flags);
 796         val = readl(VA_LEDS_BASE);
 797
 798         switch (ledevt) {
 799         case led_idle_start:
 800                 val = val & ~VERSATILE_SYS_LED0;
 801                 break;
 802
 803         case led_idle_end:
 804                 val = val | VERSATILE_SYS_LED0;
 805                 break;
 806
 807         case led_timer:
 808                 val = val ^ VERSATILE_SYS_LED1;
 809                 break;
 810
 811         case led_halted:
 812                 val = 0;
 813                 break;
 814
 815         default:
 816                 break;
 817         }
 818
 819         writel(val, VA_LEDS_BASE);
 820         local_irq_restore(flags);
 821 }
 822 #endif  /* CONFIG_LEDS */
 823
 824 void __init versatile_init(void)
 825 {
 826         int i;
 827
 828         for (i = 0; i < ARRAY_SIZE(lookups); i++)
 829                 clkdev_add(&lookups[i]);
 830
 831         platform_device_register(&versatile_flash_device);
 832         platform_device_register(&versatile_i2c_device);
 833         platform_device_register(&smc91x_device);
 834
 835         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 836                 struct amba_device *d = amba_devs[i];
 837                 amba_device_register(d, &iomem_resource);
 838         }
 839
 840 #ifdef CONFIG_LEDS
 841         leds_event = versatile_leds_event;
 842 #endif
 843 }
 844
 845 /*
 846  * Where is the timer (VA)?
 847  */
 848 #define TIMER0_VA_BASE           __io_address(VERSATILE_TIMER0_1_BASE)
 849 #define TIMER1_VA_BASE          (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 850 #define TIMER2_VA_BASE           __io_address(VERSATILE_TIMER2_3_BASE)
 851 #define TIMER3_VA_BASE          (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
 852 #define VA_IC_BASE               __io_address(VERSATILE_VIC_BASE)
 853
 854 /*
 855  * How long is the timer interval?
 856  */
 857 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 858 #if TIMER_INTERVAL >= 0x100000
 859 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
 860 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 861 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 862 #elif TIMER_INTERVAL >= 0x10000
 863 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
 864 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 865 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 866 #else
 867 #define TIMER_RELOAD    (TIMER_INTERVAL)
 868 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 869 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 870 #endif
 871
 872 static void timer_set_mode(enum clock_event_mode mode,
 873                            struct clock_event_device *clk)
 874 {
 875         unsigned long ctrl;
 876
 877         switch(mode) {
 878         case CLOCK_EVT_MODE_PERIODIC:
 879                 writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
 880
 881                 ctrl = TIMER_CTRL_PERIODIC;
 882                 ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
 883                 break;
 884         case CLOCK_EVT_MODE_ONESHOT:
 885                 /* period set, and timer enabled in 'next_event' hook */
 886                 ctrl = TIMER_CTRL_ONESHOT;
 887                 ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
 888                 break;
 889         case CLOCK_EVT_MODE_UNUSED:
 890         case CLOCK_EVT_MODE_SHUTDOWN:
 891         default:
 892                 ctrl = 0;
 893         }
 894
 895         writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
 896 }
 897
 898 static int timer_set_next_event(unsigned long evt,
 899                                 struct clock_event_device *unused)
 900 {
 901         unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
 902
 903         writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
 904         writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
 905
 906         return 0;
 907 }
 908
 909 static struct clock_event_device timer0_clockevent =     {
 910         .name           = "timer0",
 911         .shift          = 32,
 912         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 913         .set_mode       = timer_set_mode,
 914         .set_next_event = timer_set_next_event,
 915 };
 916
 917 /*
 918  * IRQ handler for the timer
 919  */
 920 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id)
 921 {
 922         struct clock_event_device *evt = &timer0_clockevent;
 923
 924         writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 925
 926         evt->event_handler(evt);
 927
 928         return IRQ_HANDLED;
 929 }
 930
 931 static struct irqaction versatile_timer_irq = {
 932         .name           = "Versatile Timer Tick",
 933         .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 934         .handler        = versatile_timer_interrupt,
 935 };
 936
 937 static cycle_t versatile_get_cycles(void)
 938 {
 939         return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 940 }
 941
 942 static struct clocksource clocksource_versatile = {
 943         .name           = "timer3",
 944         .rating         = 200,
 945         .read           = versatile_get_cycles,
 946         .mask           = CLOCKSOURCE_MASK(32),
 947         .shift          = 20,
 948         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 949 };
 950
 951 static int __init versatile_clocksource_init(void)
 952 {
 953         /* setup timer3 as free-running clocksource */
 954         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 955         writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
 956         writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
 957         writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
 958                TIMER3_VA_BASE + TIMER_CTRL);
 959
 960         clocksource_versatile.mult =
 961                 clocksource_khz2mult(1000, clocksource_versatile.shift);
 962         clocksource_register(&clocksource_versatile);
 963
 964         return 0;
 965 }
 966
 967 /*
 968  * Set up timer interrupt, and return the current time in seconds.
 969  */
 970 static void __init versatile_timer_init(void)
 971 {
 972         u32 val;
 973
 974         /*
 975          * set clock frequency:
 976          *      VERSATILE_REFCLK is 32KHz
 977          *      VERSATILE_TIMCLK is 1MHz
 978          */
 979         val = readl(__io_address(VERSATILE_SCTL_BASE));
 980         writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
 981                (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
 982                (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
 983                (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
 984                __io_address(VERSATILE_SCTL_BASE));
 985
 986         /*
 987          * Initialise to a known state (all timers off)
 988          */
 989         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 990         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 991         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 992         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 993
 994         /*
 995          * Make irqs happen for the system timer
 996          */
 997         setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
 998
 999         versatile_clocksource_init();
1000
1001         timer0_clockevent.mult =
1002                 div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
1003         timer0_clockevent.max_delta_ns =
1004                 clockevent_delta2ns(0xffffffff, &timer0_clockevent);
1005         timer0_clockevent.min_delta_ns =
1006                 clockevent_delta2ns(0xf, &timer0_clockevent);
1007
1008         timer0_clockevent.cpumask = cpumask_of_cpu(0);
1009         clockevents_register_device(&timer0_clockevent);
1010 }
1011
1012 struct sys_timer versatile_timer = {
1013         .init           = versatile_timer_init,
1014 };
1015