git.oblomov.eu Git - linux-2.6/blob - arch/ppc/oprofile/op_model_fsl_booke.c

   1 /*
   2  * oprofile/op_model_e500.c
   3  *
   4  * Freescale Book-E oprofile support, based on ppc64 oprofile support
   5  * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
   6  *
   7  * Copyright (c) 2004 Freescale Semiconductor, Inc
   8  *
   9  * Author: Andy Fleming
  10  * Maintainer: Kumar Gala <Kumar.Gala@freescale.com>
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version
  15  * 2 of the License, or (at your option) any later version.
  16  */
  17
  18 #include <linux/oprofile.h>
  19 #include <linux/init.h>
  20 #include <linux/smp.h>
  21 #include <asm/ptrace.h>
  22 #include <asm/system.h>
  23 #include <asm/processor.h>
  24 #include <asm/cputable.h>
  25 #include <asm/reg_booke.h>
  26 #include <asm/page.h>
  27 #include <asm/perfmon.h>
  28
  29 #include "op_impl.h"
  30
  31 static unsigned long reset_value[OP_MAX_COUNTER];
  32
  33 static int num_counters;
  34 static int oprofile_running;
  35
  36 static inline unsigned int ctr_read(unsigned int i)
  37 {
  38         switch(i) {
  39                 case 0:
  40                         return mfpmr(PMRN_PMC0);
  41                 case 1:
  42                         return mfpmr(PMRN_PMC1);
  43                 case 2:
  44                         return mfpmr(PMRN_PMC2);
  45                 case 3:
  46                         return mfpmr(PMRN_PMC3);
  47                 default:
  48                         return 0;
  49         }
  50 }
  51
  52 static inline void ctr_write(unsigned int i, unsigned int val)
  53 {
  54         switch(i) {
  55                 case 0:
  56                         mtpmr(PMRN_PMC0, val);
  57                         break;
  58                 case 1:
  59                         mtpmr(PMRN_PMC1, val);
  60                         break;
  61                 case 2:
  62                         mtpmr(PMRN_PMC2, val);
  63                         break;
  64                 case 3:
  65                         mtpmr(PMRN_PMC3, val);
  66                         break;
  67                 default:
  68                         break;
  69         }
  70 }
  71
  72
  73 static void fsl_booke_reg_setup(struct op_counter_config *ctr,
  74                              struct op_system_config *sys,
  75                              int num_ctrs)
  76 {
  77         int i;
  78
  79         num_counters = num_ctrs;
  80
  81         /* freeze all counters */
  82         pmc_stop_ctrs();
  83
  84         /* Our counters count up, and "count" refers to
  85          * how much before the next interrupt, and we interrupt
  86          * on overflow.  So we calculate the starting value
  87          * which will give us "count" until overflow.
  88          * Then we set the events on the enabled counters */
  89         for (i = 0; i < num_counters; ++i) {
  90                 reset_value[i] = 0x80000000UL - ctr[i].count;
  91
  92                 init_pmc_stop(i);
  93
  94                 set_pmc_event(i, ctr[i].event);
  95
  96                 set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
  97         }
  98 }
  99
 100 static void fsl_booke_start(struct op_counter_config *ctr)
 101 {
 102         int i;
 103
 104         mtmsr(mfmsr() | MSR_PMM);
 105
 106         for (i = 0; i < num_counters; ++i) {
 107                 if (ctr[i].enabled) {
 108                         ctr_write(i, reset_value[i]);
 109                         /* Set Each enabled counterd to only
 110                          * count when the Mark bit is not set */
 111                         set_pmc_marked(i, 1, 0);
 112                         pmc_start_ctr(i, 1);
 113                 } else {
 114                         ctr_write(i, 0);
 115
 116                         /* Set the ctr to be stopped */
 117                         pmc_start_ctr(i, 0);
 118                 }
 119         }
 120
 121         /* Clear the freeze bit, and enable the interrupt.
 122          * The counters won't actually start until the rfi clears
 123          * the PMM bit */
 124         pmc_start_ctrs(1);
 125
 126         oprofile_running = 1;
 127
 128         pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
 129                         mfpmr(PMRN_PMGC0));
 130 }
 131
 132 static void fsl_booke_stop(void)
 133 {
 134         /* freeze counters */
 135         pmc_stop_ctrs();
 136
 137         oprofile_running = 0;
 138
 139         pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
 140                         mfpmr(PMRN_PMGC0));
 141
 142         mb();
 143 }
 144
 145
 146 static void fsl_booke_handle_interrupt(struct pt_regs *regs,
 147                                     struct op_counter_config *ctr)
 148 {
 149         unsigned long pc;
 150         int is_kernel;
 151         int val;
 152         int i;
 153
 154         /* set the PMM bit (see comment below) */
 155         mtmsr(mfmsr() | MSR_PMM);
 156
 157         pc = regs->nip;
 158         is_kernel = (pc >= KERNELBASE);
 159
 160         for (i = 0; i < num_counters; ++i) {
 161                 val = ctr_read(i);
 162                 if (val < 0) {
 163                         if (oprofile_running && ctr[i].enabled) {
 164                                 oprofile_add_pc(pc, is_kernel, i);
 165                                 ctr_write(i, reset_value[i]);
 166                         } else {
 167                                 ctr_write(i, 0);
 168                         }
 169                 }
 170         }
 171
 172         /* The freeze bit was set by the interrupt. */
 173         /* Clear the freeze bit, and reenable the interrupt.
 174          * The counters won't actually start until the rfi clears
 175          * the PMM bit */
 176         pmc_start_ctrs(1);
 177 }
 178
 179 struct op_ppc32_model op_model_fsl_booke = {
 180         .reg_setup              = fsl_booke_reg_setup,
 181         .start                  = fsl_booke_start,
 182         .stop                   = fsl_booke_stop,
 183         .handle_interrupt       = fsl_booke_handle_interrupt,
 184 };