git.oblomov.eu Git - linux-2.6/blob - arch/arm/plat-omap/usb.c

   1  /*
   2  * arch/arm/plat-omap/usb.c -- platform level USB initialization
   3  *
   4  * Copyright (C) 2004 Texas Instruments, Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20
  21 #undef  DEBUG
  22
  23 #include <linux/module.h>
  24 #include <linux/kernel.h>
  25 #include <linux/types.h>
  26 #include <linux/errno.h>
  27 #include <linux/init.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/usb/otg.h>
  30
  31 #include <asm/io.h>
  32 #include <asm/irq.h>
  33 #include <asm/system.h>
  34 #include <asm/hardware.h>
  35
  36 #include <asm/arch/control.h>
  37 #include <asm/arch/mux.h>
  38 #include <asm/arch/usb.h>
  39 #include <asm/arch/board.h>
  40
  41 #ifdef CONFIG_ARCH_OMAP1
  42
  43 #define INT_USB_IRQ_GEN         IH2_BASE + 20
  44 #define INT_USB_IRQ_NISO        IH2_BASE + 30
  45 #define INT_USB_IRQ_ISO         IH2_BASE + 29
  46 #define INT_USB_IRQ_HGEN        INT_USB_HHC_1
  47 #define INT_USB_IRQ_OTG         IH2_BASE + 8
  48
  49 #else
  50
  51 #define INT_USB_IRQ_GEN         INT_24XX_USB_IRQ_GEN
  52 #define INT_USB_IRQ_NISO        INT_24XX_USB_IRQ_NISO
  53 #define INT_USB_IRQ_ISO         INT_24XX_USB_IRQ_ISO
  54 #define INT_USB_IRQ_HGEN        INT_24XX_USB_IRQ_HGEN
  55 #define INT_USB_IRQ_OTG         INT_24XX_USB_IRQ_OTG
  56
  57 #endif
  58
  59
  60 /* These routines should handle the standard chip-specific modes
  61  * for usb0/1/2 ports, covering basic mux and transceiver setup.
  62  *
  63  * Some board-*.c files will need to set up additional mux options,
  64  * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
  65  */
  66
  67 /* TESTED ON:
  68  *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
  69  *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
  70  *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
  71  *  - 1510 Innovator UDC with bundled usb0 cable
  72  *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
  73  *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
  74  *  - 1710 custom development board using alternate pin group
  75  *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
  76  */
  77
  78 /*-------------------------------------------------------------------------*/
  79
  80 #if     defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_USB_MUSB_OTG)
  81
  82 static struct otg_transceiver *xceiv;
  83
  84 /**
  85  * otg_get_transceiver - find the (single) OTG transceiver driver
  86  *
  87  * Returns the transceiver driver, after getting a refcount to it; or
  88  * null if there is no such transceiver.  The caller is responsible for
  89  * releasing that count.
  90  */
  91 struct otg_transceiver *otg_get_transceiver(void)
  92 {
  93         if (xceiv)
  94                 get_device(xceiv->dev);
  95         return xceiv;
  96 }
  97 EXPORT_SYMBOL(otg_get_transceiver);
  98
  99 int otg_set_transceiver(struct otg_transceiver *x)
 100 {
 101         if (xceiv && x)
 102                 return -EBUSY;
 103         xceiv = x;
 104         return 0;
 105 }
 106 EXPORT_SYMBOL(otg_set_transceiver);
 107
 108 #endif
 109
 110 /*-------------------------------------------------------------------------*/
 111
 112 #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
 113
 114 static void omap2_usb_devconf_clear(u8 port, u32 mask)
 115 {
 116         u32 r;
 117
 118         r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 119         r &= ~USBTXWRMODEI(port, mask);
 120         omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
 121 }
 122
 123 static void omap2_usb_devconf_set(u8 port, u32 mask)
 124 {
 125         u32 r;
 126
 127         r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 128         r |= USBTXWRMODEI(port, mask);
 129         omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
 130 }
 131
 132 static void omap2_usb2_disable_5pinbitll(void)
 133 {
 134         u32 r;
 135
 136         r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 137         r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
 138         omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
 139 }
 140
 141 static void omap2_usb2_enable_5pinunitll(void)
 142 {
 143         u32 r;
 144
 145         r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 146         r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
 147         omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
 148 }
 149
 150 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 151 {
 152         u32     syscon1 = 0;
 153
 154         if (cpu_is_omap24xx())
 155                 omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
 156
 157         if (nwires == 0) {
 158                 if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
 159                         u32 l;
 160
 161                         /* pulldown D+/D- */
 162                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 163                         l &= ~(3 << 1);
 164                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 165                 }
 166                 return 0;
 167         }
 168
 169         if (is_device) {
 170                 if (cpu_is_omap24xx())
 171                         omap_cfg_reg(J20_24XX_USB0_PUEN);
 172                 else
 173                         omap_cfg_reg(W4_USB_PUEN);
 174         }
 175
 176         /* internal transceiver (unavailable on 17xx, 24xx) */
 177         if (!cpu_class_is_omap2() && nwires == 2) {
 178                 u32 l;
 179
 180                 // omap_cfg_reg(P9_USB_DP);
 181                 // omap_cfg_reg(R8_USB_DM);
 182
 183                 if (cpu_is_omap15xx()) {
 184                         /* This works on 1510-Innovator */
 185                         return 0;
 186                 }
 187
 188                 /* NOTES:
 189                  *  - peripheral should configure VBUS detection!
 190                  *  - only peripherals may use the internal D+/D- pulldowns
 191                  *  - OTG support on this port not yet written
 192                  */
 193
 194                 l = omap_readl(USB_TRANSCEIVER_CTRL);
 195                 l &= ~(7 << 4);
 196                 if (!is_device)
 197                         l |= (3 << 1);
 198                 omap_writel(l, USB_TRANSCEIVER_CTRL);
 199
 200                 return 3 << 16;
 201         }
 202
 203         /* alternate pin config, external transceiver */
 204         if (cpu_is_omap15xx()) {
 205                 printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
 206                 return 0;
 207         }
 208
 209         if (cpu_is_omap24xx()) {
 210                 omap_cfg_reg(K18_24XX_USB0_DAT);
 211                 omap_cfg_reg(K19_24XX_USB0_TXEN);
 212                 omap_cfg_reg(J14_24XX_USB0_SE0);
 213                 if (nwires != 3)
 214                         omap_cfg_reg(J18_24XX_USB0_RCV);
 215         } else {
 216                 omap_cfg_reg(V6_USB0_TXD);
 217                 omap_cfg_reg(W9_USB0_TXEN);
 218                 omap_cfg_reg(W5_USB0_SE0);
 219                 if (nwires != 3)
 220                         omap_cfg_reg(Y5_USB0_RCV);
 221         }
 222
 223         /* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
 224          * may be able to use I2C requests to set those bits along
 225          * with VBUS switching and overcurrent detection.
 226          */
 227
 228         if (cpu_class_is_omap1() && nwires != 6) {
 229                 u32 l;
 230
 231                 l = omap_readl(USB_TRANSCEIVER_CTRL);
 232                 l &= ~CONF_USB2_UNI_R;
 233                 omap_writel(l, USB_TRANSCEIVER_CTRL);
 234         }
 235
 236         switch (nwires) {
 237         case 3:
 238                 syscon1 = 2;
 239                 if (cpu_is_omap24xx())
 240                         omap2_usb_devconf_set(0, USB_BIDIR);
 241                 break;
 242         case 4:
 243                 syscon1 = 1;
 244                 if (cpu_is_omap24xx())
 245                         omap2_usb_devconf_set(0, USB_BIDIR);
 246                 break;
 247         case 6:
 248                 syscon1 = 3;
 249                 if (cpu_is_omap24xx()) {
 250                         omap_cfg_reg(J19_24XX_USB0_VP);
 251                         omap_cfg_reg(K20_24XX_USB0_VM);
 252                         omap2_usb_devconf_set(0, USB_UNIDIR);
 253                 } else {
 254                         u32 l;
 255
 256                         omap_cfg_reg(AA9_USB0_VP);
 257                         omap_cfg_reg(R9_USB0_VM);
 258                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 259                         l |= CONF_USB2_UNI_R;
 260                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 261                 }
 262                 break;
 263         default:
 264                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 265                         0, nwires);
 266         }
 267         return syscon1 << 16;
 268 }
 269
 270 static u32 __init omap_usb1_init(unsigned nwires)
 271 {
 272         u32     syscon1 = 0;
 273
 274         if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
 275                 u32 l;
 276
 277                 l = omap_readl(USB_TRANSCEIVER_CTRL);
 278                 l &= ~CONF_USB1_UNI_R;
 279                 omap_writel(l, USB_TRANSCEIVER_CTRL);
 280         }
 281         if (cpu_is_omap24xx())
 282                 omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
 283
 284         if (nwires == 0)
 285                 return 0;
 286
 287         /* external transceiver */
 288         if (cpu_class_is_omap1()) {
 289                 omap_cfg_reg(USB1_TXD);
 290                 omap_cfg_reg(USB1_TXEN);
 291                 if (nwires != 3)
 292                         omap_cfg_reg(USB1_RCV);
 293         }
 294
 295         if (cpu_is_omap15xx()) {
 296                 omap_cfg_reg(USB1_SEO);
 297                 omap_cfg_reg(USB1_SPEED);
 298                 // SUSP
 299         } else if (cpu_is_omap1610() || cpu_is_omap5912()) {
 300                 omap_cfg_reg(W13_1610_USB1_SE0);
 301                 omap_cfg_reg(R13_1610_USB1_SPEED);
 302                 // SUSP
 303         } else if (cpu_is_omap1710()) {
 304                 omap_cfg_reg(R13_1710_USB1_SE0);
 305                 // SUSP
 306         } else if (cpu_is_omap24xx()) {
 307                 /* NOTE:  board-specific code must set up pin muxing for usb1,
 308                  * since each signal could come out on either of two balls.
 309                  */
 310         } else {
 311                 pr_debug("usb%d cpu unrecognized\n", 1);
 312                 return 0;
 313         }
 314
 315         switch (nwires) {
 316         case 2:
 317                 if (!cpu_is_omap24xx())
 318                         goto bad;
 319                 /* NOTE: board-specific code must override this setting if
 320                  * this TLL link is not using DP/DM
 321                  */
 322                 syscon1 = 1;
 323                 omap2_usb_devconf_set(1, USB_BIDIR_TLL);
 324                 break;
 325         case 3:
 326                 syscon1 = 2;
 327                 if (cpu_is_omap24xx())
 328                         omap2_usb_devconf_set(1, USB_BIDIR);
 329                 break;
 330         case 4:
 331                 syscon1 = 1;
 332                 if (cpu_is_omap24xx())
 333                         omap2_usb_devconf_set(1, USB_BIDIR);
 334                 break;
 335         case 6:
 336                 if (cpu_is_omap24xx())
 337                         goto bad;
 338                 syscon1 = 3;
 339                 omap_cfg_reg(USB1_VP);
 340                 omap_cfg_reg(USB1_VM);
 341                 if (!cpu_is_omap15xx()) {
 342                         u32 l;
 343
 344                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 345                         l |= CONF_USB1_UNI_R;
 346                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 347                 }
 348                 break;
 349         default:
 350 bad:
 351                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 352                         1, nwires);
 353         }
 354         return syscon1 << 20;
 355 }
 356
 357 static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 358 {
 359         u32     syscon1 = 0;
 360
 361         if (cpu_is_omap24xx()) {
 362                 omap2_usb2_disable_5pinbitll();
 363                 alt_pingroup = 0;
 364         }
 365
 366         /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
 367         if (alt_pingroup || nwires == 0)
 368                 return 0;
 369
 370         if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
 371                 u32 l;
 372
 373                 l = omap_readl(USB_TRANSCEIVER_CTRL);
 374                 l &= ~CONF_USB2_UNI_R;
 375                 omap_writel(l, USB_TRANSCEIVER_CTRL);
 376         }
 377
 378         /* external transceiver */
 379         if (cpu_is_omap15xx()) {
 380                 omap_cfg_reg(USB2_TXD);
 381                 omap_cfg_reg(USB2_TXEN);
 382                 omap_cfg_reg(USB2_SEO);
 383                 if (nwires != 3)
 384                         omap_cfg_reg(USB2_RCV);
 385                 /* there is no USB2_SPEED */
 386         } else if (cpu_is_omap16xx()) {
 387                 omap_cfg_reg(V6_USB2_TXD);
 388                 omap_cfg_reg(W9_USB2_TXEN);
 389                 omap_cfg_reg(W5_USB2_SE0);
 390                 if (nwires != 3)
 391                         omap_cfg_reg(Y5_USB2_RCV);
 392                 // FIXME omap_cfg_reg(USB2_SPEED);
 393         } else if (cpu_is_omap24xx()) {
 394                 omap_cfg_reg(Y11_24XX_USB2_DAT);
 395                 omap_cfg_reg(AA10_24XX_USB2_SE0);
 396                 if (nwires > 2)
 397                         omap_cfg_reg(AA12_24XX_USB2_TXEN);
 398                 if (nwires > 3)
 399                         omap_cfg_reg(AA6_24XX_USB2_RCV);
 400         } else {
 401                 pr_debug("usb%d cpu unrecognized\n", 1);
 402                 return 0;
 403         }
 404         // if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP);
 405
 406         switch (nwires) {
 407         case 2:
 408                 if (!cpu_is_omap24xx())
 409                         goto bad;
 410                 /* NOTE: board-specific code must override this setting if
 411                  * this TLL link is not using DP/DM
 412                  */
 413                 syscon1 = 1;
 414                 omap2_usb_devconf_set(2, USB_BIDIR_TLL);
 415                 break;
 416         case 3:
 417                 syscon1 = 2;
 418                 if (cpu_is_omap24xx())
 419                         omap2_usb_devconf_set(2, USB_BIDIR);
 420                 break;
 421         case 4:
 422                 syscon1 = 1;
 423                 if (cpu_is_omap24xx())
 424                         omap2_usb_devconf_set(2, USB_BIDIR);
 425                 break;
 426         case 5:
 427                 if (!cpu_is_omap24xx())
 428                         goto bad;
 429                 omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
 430                 /* NOTE: board-specific code must override this setting if
 431                  * this TLL link is not using DP/DM.  Something must also
 432                  * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
 433                  */
 434                 syscon1 = 3;
 435                 omap2_usb2_enable_5pinunitll();
 436                 break;
 437         case 6:
 438                 if (cpu_is_omap24xx())
 439                         goto bad;
 440                 syscon1 = 3;
 441                 if (cpu_is_omap15xx()) {
 442                         omap_cfg_reg(USB2_VP);
 443                         omap_cfg_reg(USB2_VM);
 444                 } else {
 445                         u32 l;
 446
 447                         omap_cfg_reg(AA9_USB2_VP);
 448                         omap_cfg_reg(R9_USB2_VM);
 449                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 450                         l |= CONF_USB2_UNI_R;
 451                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 452                 }
 453                 break;
 454         default:
 455 bad:
 456                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 457                         2, nwires);
 458         }
 459         return syscon1 << 24;
 460 }
 461
 462 #endif
 463
 464 /*-------------------------------------------------------------------------*/
 465
 466 #if     defined(CONFIG_USB_GADGET_OMAP) || \
 467         defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
 468         (defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
 469 static void usb_release(struct device *dev)
 470 {
 471         /* normally not freed */
 472 }
 473 #endif
 474
 475 #ifdef  CONFIG_USB_GADGET_OMAP
 476
 477 static struct resource udc_resources[] = {
 478         /* order is significant! */
 479         {               /* registers */
 480                 .start          = UDC_BASE,
 481                 .end            = UDC_BASE + 0xff,
 482                 .flags          = IORESOURCE_MEM,
 483         }, {            /* general IRQ */
 484                 .start          = INT_USB_IRQ_GEN,
 485                 .flags          = IORESOURCE_IRQ,
 486         }, {            /* PIO IRQ */
 487                 .start          = INT_USB_IRQ_NISO,
 488                 .flags          = IORESOURCE_IRQ,
 489         }, {            /* SOF IRQ */
 490                 .start          = INT_USB_IRQ_ISO,
 491                 .flags          = IORESOURCE_IRQ,
 492         },
 493 };
 494
 495 static u64 udc_dmamask = ~(u32)0;
 496
 497 static struct platform_device udc_device = {
 498         .name           = "omap_udc",
 499         .id             = -1,
 500         .dev = {
 501                 .release                = usb_release,
 502                 .dma_mask               = &udc_dmamask,
 503                 .coherent_dma_mask      = 0xffffffff,
 504         },
 505         .num_resources  = ARRAY_SIZE(udc_resources),
 506         .resource       = udc_resources,
 507 };
 508
 509 #endif
 510
 511 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 512
 513 /* The dmamask must be set for OHCI to work */
 514 static u64 ohci_dmamask = ~(u32)0;
 515
 516 static struct resource ohci_resources[] = {
 517         {
 518                 .start  = OMAP_OHCI_BASE,
 519                 .end    = OMAP_OHCI_BASE + 0xff,
 520                 .flags  = IORESOURCE_MEM,
 521         },
 522         {
 523                 .start  = INT_USB_IRQ_HGEN,
 524                 .flags  = IORESOURCE_IRQ,
 525         },
 526 };
 527
 528 static struct platform_device ohci_device = {
 529         .name                   = "ohci",
 530         .id                     = -1,
 531         .dev = {
 532                 .release                = usb_release,
 533                 .dma_mask               = &ohci_dmamask,
 534                 .coherent_dma_mask      = 0xffffffff,
 535         },
 536         .num_resources  = ARRAY_SIZE(ohci_resources),
 537         .resource               = ohci_resources,
 538 };
 539
 540 #endif
 541
 542 #if     defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
 543
 544 static struct resource otg_resources[] = {
 545         /* order is significant! */
 546         {
 547                 .start          = OTG_BASE,
 548                 .end            = OTG_BASE + 0xff,
 549                 .flags          = IORESOURCE_MEM,
 550         }, {
 551                 .start          = INT_USB_IRQ_OTG,
 552                 .flags          = IORESOURCE_IRQ,
 553         },
 554 };
 555
 556 static struct platform_device otg_device = {
 557         .name           = "omap_otg",
 558         .id             = -1,
 559         .dev = {
 560                 .release                = usb_release,
 561         },
 562         .num_resources  = ARRAY_SIZE(otg_resources),
 563         .resource       = otg_resources,
 564 };
 565
 566 #endif
 567
 568 /*-------------------------------------------------------------------------*/
 569
 570 // FIXME correct answer depends on hmc_mode,
 571 // as does (on omap1) any nonzero value for config->otg port number
 572 #ifdef  CONFIG_USB_GADGET_OMAP
 573 #define is_usb0_device(config)  1
 574 #else
 575 #define is_usb0_device(config)  0
 576 #endif
 577
 578 /*-------------------------------------------------------------------------*/
 579
 580 #ifdef  CONFIG_ARCH_OMAP_OTG
 581
 582 void __init
 583 omap_otg_init(struct omap_usb_config *config)
 584 {
 585         u32             syscon;
 586         int             status;
 587         int             alt_pingroup = 0;
 588
 589         /* NOTE:  no bus or clock setup (yet?) */
 590
 591         syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
 592         if (!(syscon & OTG_RESET_DONE))
 593                 pr_debug("USB resets not complete?\n");
 594
 595         //omap_writew(0, OTG_IRQ_EN);
 596
 597         /* pin muxing and transceiver pinouts */
 598         if (config->pins[0] > 2)        /* alt pingroup 2 */
 599                 alt_pingroup = 1;
 600         syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
 601         syscon |= omap_usb1_init(config->pins[1]);
 602         syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
 603         pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 604         omap_writel(syscon, OTG_SYSCON_1);
 605
 606         syscon = config->hmc_mode;
 607         syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
 608 #ifdef  CONFIG_USB_OTG
 609         if (config->otg)
 610                 syscon |= OTG_EN;
 611 #endif
 612         if (cpu_class_is_omap1())
 613                 pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
 614                          omap_readl(USB_TRANSCEIVER_CTRL));
 615         pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
 616         omap_writel(syscon, OTG_SYSCON_2);
 617
 618         printk("USB: hmc %d", config->hmc_mode);
 619         if (!alt_pingroup)
 620                 printk(", usb2 alt %d wires", config->pins[2]);
 621         else if (config->pins[0])
 622                 printk(", usb0 %d wires%s", config->pins[0],
 623                         is_usb0_device(config) ? " (dev)" : "");
 624         if (config->pins[1])
 625                 printk(", usb1 %d wires", config->pins[1]);
 626         if (!alt_pingroup && config->pins[2])
 627                 printk(", usb2 %d wires", config->pins[2]);
 628         if (config->otg)
 629                 printk(", Mini-AB on usb%d", config->otg - 1);
 630         printk("\n");
 631
 632         if (cpu_class_is_omap1()) {
 633                 u16 w;
 634
 635                 /* leave USB clocks/controllers off until needed */
 636                 w = omap_readw(ULPD_SOFT_REQ);
 637                 w &= ~SOFT_USB_CLK_REQ;
 638                 omap_writew(w, ULPD_SOFT_REQ);
 639
 640                 w = omap_readw(ULPD_CLOCK_CTRL);
 641                 w &= ~USB_MCLK_EN;
 642                 w |= DIS_USB_PVCI_CLK;
 643                 omap_writew(w, ULPD_CLOCK_CTRL);
 644         }
 645         syscon = omap_readl(OTG_SYSCON_1);
 646         syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 647
 648 #ifdef  CONFIG_USB_GADGET_OMAP
 649         if (config->otg || config->register_dev) {
 650                 syscon &= ~DEV_IDLE_EN;
 651                 udc_device.dev.platform_data = config;
 652                 /* FIXME patch IRQ numbers for omap730 */
 653                 status = platform_device_register(&udc_device);
 654                 if (status)
 655                         pr_debug("can't register UDC device, %d\n", status);
 656         }
 657 #endif
 658
 659 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 660         if (config->otg || config->register_host) {
 661                 syscon &= ~HST_IDLE_EN;
 662                 ohci_device.dev.platform_data = config;
 663                 if (cpu_is_omap730())
 664                         ohci_resources[1].start = INT_730_USB_HHC_1;
 665                 status = platform_device_register(&ohci_device);
 666                 if (status)
 667                         pr_debug("can't register OHCI device, %d\n", status);
 668         }
 669 #endif
 670
 671 #ifdef  CONFIG_USB_OTG
 672         if (config->otg) {
 673                 syscon &= ~OTG_IDLE_EN;
 674                 otg_device.dev.platform_data = config;
 675                 if (cpu_is_omap730())
 676                         otg_resources[1].start = INT_730_USB_OTG;
 677                 status = platform_device_register(&otg_device);
 678                 if (status)
 679                         pr_debug("can't register OTG device, %d\n", status);
 680         }
 681 #endif
 682         pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 683         omap_writel(syscon, OTG_SYSCON_1);
 684
 685         status = 0;
 686 }
 687
 688 #else
 689 static inline void omap_otg_init(struct omap_usb_config *config) {}
 690 #endif
 691
 692 /*-------------------------------------------------------------------------*/
 693
 694 #ifdef  CONFIG_ARCH_OMAP15XX
 695
 696 /* ULPD_DPLL_CTRL */
 697 #define DPLL_IOB                (1 << 13)
 698 #define DPLL_PLL_ENABLE         (1 << 4)
 699 #define DPLL_LOCK               (1 << 0)
 700
 701 /* ULPD_APLL_CTRL */
 702 #define APLL_NDPLL_SWITCH       (1 << 0)
 703
 704
 705 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 706 {
 707         unsigned int val;
 708         u16 w;
 709
 710         omap_usb0_init(config->pins[0], is_usb0_device(config));
 711         omap_usb1_init(config->pins[1]);
 712         omap_usb2_init(config->pins[2], 0);
 713
 714         val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
 715         val |= (config->hmc_mode << 1);
 716         omap_writel(val, MOD_CONF_CTRL_0);
 717
 718         printk("USB: hmc %d", config->hmc_mode);
 719         if (config->pins[0])
 720                 printk(", usb0 %d wires%s", config->pins[0],
 721                         is_usb0_device(config) ? " (dev)" : "");
 722         if (config->pins[1])
 723                 printk(", usb1 %d wires", config->pins[1]);
 724         if (config->pins[2])
 725                 printk(", usb2 %d wires", config->pins[2]);
 726         printk("\n");
 727
 728         /* use DPLL for 48 MHz function clock */
 729         pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
 730                         omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
 731
 732         w = omap_readw(ULPD_APLL_CTRL);
 733         w &= ~APLL_NDPLL_SWITCH;
 734         omap_writew(w, ULPD_APLL_CTRL);
 735
 736         w = omap_readw(ULPD_DPLL_CTRL);
 737         w |= DPLL_IOB | DPLL_PLL_ENABLE;
 738         omap_writew(w, ULPD_DPLL_CTRL);
 739
 740         w = omap_readw(ULPD_SOFT_REQ);
 741         w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
 742         omap_writew(w, ULPD_SOFT_REQ);
 743
 744         while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
 745                 cpu_relax();
 746
 747 #ifdef  CONFIG_USB_GADGET_OMAP
 748         if (config->register_dev) {
 749                 int status;
 750
 751                 udc_device.dev.platform_data = config;
 752                 status = platform_device_register(&udc_device);
 753                 if (status)
 754                         pr_debug("can't register UDC device, %d\n", status);
 755                 /* udc driver gates 48MHz by D+ pullup */
 756         }
 757 #endif
 758
 759 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 760         if (config->register_host) {
 761                 int status;
 762
 763                 ohci_device.dev.platform_data = config;
 764                 status = platform_device_register(&ohci_device);
 765                 if (status)
 766                         pr_debug("can't register OHCI device, %d\n", status);
 767                 /* hcd explicitly gates 48MHz */
 768         }
 769 #endif
 770 }
 771
 772 #else
 773 static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 774 #endif
 775
 776 /*-------------------------------------------------------------------------*/
 777
 778 static struct omap_usb_config platform_data;
 779
 780 static int __init
 781 omap_usb_init(void)
 782 {
 783         const struct omap_usb_config *config;
 784
 785         config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
 786         if (config == NULL) {
 787                 printk(KERN_ERR "USB: No board-specific "
 788                                 "platform config found\n");
 789                 return -ENODEV;
 790         }
 791         platform_data = *config;
 792
 793         if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
 794                 omap_otg_init(&platform_data);
 795         else if (cpu_is_omap15xx())
 796                 omap_1510_usb_init(&platform_data);
 797         else {
 798                 printk(KERN_ERR "USB: No init for your chip yet\n");
 799                 return -ENODEV;
 800         }
 801         return 0;
 802 }
 803
 804 subsys_initcall(omap_usb_init);