git.oblomov.eu Git - linux-2.6/blob - drivers/media/video/pvrusb2/pvrusb2-encoder.c

   1 /*
   2  *
   3  *
   4  *  Copyright (C) 2005 Mike Isely <isely@pobox.com>
   5  *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *  GNU General Public License for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License
  17  *  along with this program; if not, write to the Free Software
  18  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  *
  20  */
  21
  22 #include <linux/device.h>   // for linux/firmware.h
  23 #include <linux/firmware.h>
  24 #include "pvrusb2-util.h"
  25 #include "pvrusb2-encoder.h"
  26 #include "pvrusb2-hdw-internal.h"
  27 #include "pvrusb2-debug.h"
  28 #include "pvrusb2-fx2-cmd.h"
  29
  30
  31
  32 /* Firmware mailbox flags - definitions found from ivtv */
  33 #define IVTV_MBOX_FIRMWARE_DONE 0x00000004
  34 #define IVTV_MBOX_DRIVER_DONE 0x00000002
  35 #define IVTV_MBOX_DRIVER_BUSY 0x00000001
  36
  37 #define MBOX_BASE 0x44
  38
  39
  40 static int pvr2_encoder_write_words(struct pvr2_hdw *hdw,
  41                                     unsigned int offs,
  42                                     const u32 *data, unsigned int dlen)
  43 {
  44         unsigned int idx,addr;
  45         unsigned int bAddr;
  46         int ret;
  47         unsigned int chunkCnt;
  48
  49         /*
  50
  51         Format: First byte must be 0x01.  Remaining 32 bit words are
  52         spread out into chunks of 7 bytes each, with the first 4 bytes
  53         being the data word (little endian), and the next 3 bytes
  54         being the address where that data word is to be written (big
  55         endian).  Repeat request for additional words, with offset
  56         adjusted accordingly.
  57
  58         */
  59         while (dlen) {
  60                 chunkCnt = 8;
  61                 if (chunkCnt > dlen) chunkCnt = dlen;
  62                 memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
  63                 bAddr = 0;
  64                 hdw->cmd_buffer[bAddr++] = FX2CMD_MEM_WRITE_DWORD;
  65                 for (idx = 0; idx < chunkCnt; idx++) {
  66                         addr = idx + offs;
  67                         hdw->cmd_buffer[bAddr+6] = (addr & 0xffu);
  68                         hdw->cmd_buffer[bAddr+5] = ((addr>>8) & 0xffu);
  69                         hdw->cmd_buffer[bAddr+4] = ((addr>>16) & 0xffu);
  70                         PVR2_DECOMPOSE_LE(hdw->cmd_buffer, bAddr,data[idx]);
  71                         bAddr += 7;
  72                 }
  73                 ret = pvr2_send_request(hdw,
  74                                         hdw->cmd_buffer,1+(chunkCnt*7),
  75                                         NULL,0);
  76                 if (ret) return ret;
  77                 data += chunkCnt;
  78                 dlen -= chunkCnt;
  79                 offs += chunkCnt;
  80         }
  81
  82         return 0;
  83 }
  84
  85
  86 static int pvr2_encoder_read_words(struct pvr2_hdw *hdw,
  87                                    unsigned int offs,
  88                                    u32 *data, unsigned int dlen)
  89 {
  90         unsigned int idx;
  91         int ret;
  92         unsigned int chunkCnt;
  93
  94         /*
  95
  96         Format: First byte must be 0x02 (status check) or 0x28 (read
  97         back block of 32 bit words).  Next 6 bytes must be zero,
  98         followed by a single byte of MBOX_BASE+offset for portion to
  99         be read.  Returned data is packed set of 32 bits words that
 100         were read.
 101
 102         */
 103
 104         while (dlen) {
 105                 chunkCnt = 16;
 106                 if (chunkCnt > dlen) chunkCnt = dlen;
 107                 if (chunkCnt < 16) chunkCnt = 1;
 108                 hdw->cmd_buffer[0] =
 109                         ((chunkCnt == 1) ?
 110                          FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES);
 111                 hdw->cmd_buffer[1] = 0;
 112                 hdw->cmd_buffer[2] = 0;
 113                 hdw->cmd_buffer[3] = 0;
 114                 hdw->cmd_buffer[4] = 0;
 115                 hdw->cmd_buffer[5] = ((offs>>16) & 0xffu);
 116                 hdw->cmd_buffer[6] = ((offs>>8) & 0xffu);
 117                 hdw->cmd_buffer[7] = (offs & 0xffu);
 118                 ret = pvr2_send_request(hdw,
 119                                         hdw->cmd_buffer,8,
 120                                         hdw->cmd_buffer,
 121                                         (chunkCnt == 1 ? 4 : 16 * 4));
 122                 if (ret) return ret;
 123
 124                 for (idx = 0; idx < chunkCnt; idx++) {
 125                         data[idx] = PVR2_COMPOSE_LE(hdw->cmd_buffer,idx*4);
 126                 }
 127                 data += chunkCnt;
 128                 dlen -= chunkCnt;
 129                 offs += chunkCnt;
 130         }
 131
 132         return 0;
 133 }
 134
 135
 136 /* This prototype is set up to be compatible with the
 137    cx2341x_mbox_func prototype in cx2341x.h, which should be in
 138    kernels 2.6.18 or later.  We do this so that we can enable
 139    cx2341x.ko to write to our encoder (by handing it a pointer to this
 140    function).  For earlier kernels this doesn't really matter. */
 141 static int pvr2_encoder_cmd(void *ctxt,
 142                             u32 cmd,
 143                             int arg_cnt_send,
 144                             int arg_cnt_recv,
 145                             u32 *argp)
 146 {
 147         unsigned int poll_count;
 148         unsigned int try_count = 0;
 149         int retry_flag;
 150         int ret = 0;
 151         unsigned int idx;
 152         /* These sizes look to be limited by the FX2 firmware implementation */
 153         u32 wrData[16];
 154         u32 rdData[16];
 155         struct pvr2_hdw *hdw = (struct pvr2_hdw *)ctxt;
 156
 157
 158         /*
 159
 160         The encoder seems to speak entirely using blocks 32 bit words.
 161         In ivtv driver terms, this is a mailbox at MBOX_BASE which we
 162         populate with data and watch what the hardware does with it.
 163         The first word is a set of flags used to control the
 164         transaction, the second word is the command to execute, the
 165         third byte is zero (ivtv driver suggests that this is some
 166         kind of return value), and the fourth byte is a specified
 167         timeout (windows driver always uses 0x00060000 except for one
 168         case when it is zero).  All successive words are the argument
 169         words for the command.
 170
 171         First, write out the entire set of words, with the first word
 172         being zero.
 173
 174         Next, write out just the first word again, but set it to
 175         IVTV_MBOX_DRIVER_DONE | IVTV_DRIVER_BUSY this time (which
 176         probably means "go").
 177
 178         Next, read back the return count words.  Check the first word,
 179         which should have IVTV_MBOX_FIRMWARE_DONE set.  If however
 180         that bit is not set, then the command isn't done so repeat the
 181         read until it is set.
 182
 183         Finally, write out just the first word again, but set it to
 184         0x0 this time (which probably means "idle").
 185
 186         */
 187
 188         if (arg_cnt_send > (ARRAY_SIZE(wrData) - 4)) {
 189                 pvr2_trace(
 190                         PVR2_TRACE_ERROR_LEGS,
 191                         "Failed to write cx23416 command"
 192                         " - too many input arguments"
 193                         " (was given %u limit %lu)",
 194                         arg_cnt_send, (long unsigned) ARRAY_SIZE(wrData) - 4);
 195                 return -EINVAL;
 196         }
 197
 198         if (arg_cnt_recv > (ARRAY_SIZE(rdData) - 4)) {
 199                 pvr2_trace(
 200                         PVR2_TRACE_ERROR_LEGS,
 201                         "Failed to write cx23416 command"
 202                         " - too many return arguments"
 203                         " (was given %u limit %lu)",
 204                         arg_cnt_recv, (long unsigned) ARRAY_SIZE(rdData) - 4);
 205                 return -EINVAL;
 206         }
 207
 208
 209         LOCK_TAKE(hdw->ctl_lock); do {
 210
 211                 if (!hdw->state_encoder_ok) {
 212                         ret = -EIO;
 213                         break;
 214                 }
 215
 216                 retry_flag = 0;
 217                 try_count++;
 218                 ret = 0;
 219                 wrData[0] = 0;
 220                 wrData[1] = cmd;
 221                 wrData[2] = 0;
 222                 wrData[3] = 0x00060000;
 223                 for (idx = 0; idx < arg_cnt_send; idx++) {
 224                         wrData[idx+4] = argp[idx];
 225                 }
 226                 for (; idx < ARRAY_SIZE(wrData) - 4; idx++) {
 227                         wrData[idx+4] = 0;
 228                 }
 229
 230                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,idx);
 231                 if (ret) break;
 232                 wrData[0] = IVTV_MBOX_DRIVER_DONE|IVTV_MBOX_DRIVER_BUSY;
 233                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
 234                 if (ret) break;
 235                 poll_count = 0;
 236                 while (1) {
 237                         poll_count++;
 238                         ret = pvr2_encoder_read_words(hdw,MBOX_BASE,rdData,
 239                                                       arg_cnt_recv+4);
 240                         if (ret) {
 241                                 break;
 242                         }
 243                         if (rdData[0] & IVTV_MBOX_FIRMWARE_DONE) {
 244                                 break;
 245                         }
 246                         if (rdData[0] && (poll_count < 1000)) continue;
 247                         if (!rdData[0]) {
 248                                 retry_flag = !0;
 249                                 pvr2_trace(
 250                                         PVR2_TRACE_ERROR_LEGS,
 251                                         "Encoder timed out waiting for us"
 252                                         "; arranging to retry");
 253                         } else {
 254                                 pvr2_trace(
 255                                         PVR2_TRACE_ERROR_LEGS,
 256                                         "***WARNING*** device's encoder"
 257                                         " appears to be stuck"
 258                                         " (status=0x%08x)",rdData[0]);
 259                         }
 260                         pvr2_trace(
 261                                 PVR2_TRACE_ERROR_LEGS,
 262                                 "Encoder command: 0x%02x",cmd);
 263                         for (idx = 4; idx < arg_cnt_send; idx++) {
 264                                 pvr2_trace(
 265                                         PVR2_TRACE_ERROR_LEGS,
 266                                         "Encoder arg%d: 0x%08x",
 267                                         idx-3,wrData[idx]);
 268                         }
 269                         ret = -EBUSY;
 270                         break;
 271                 }
 272                 if (retry_flag) {
 273                         if (try_count < 20) continue;
 274                         pvr2_trace(
 275                                 PVR2_TRACE_ERROR_LEGS,
 276                                 "Too many retries...");
 277                         ret = -EBUSY;
 278                 }
 279                 if (ret) {
 280                         del_timer_sync(&hdw->encoder_run_timer);
 281                         hdw->state_encoder_ok = 0;
 282                         pvr2_trace(PVR2_TRACE_STBITS,
 283                                    "State bit %s <-- %s",
 284                                    "state_encoder_ok",
 285                                    (hdw->state_encoder_ok ? "true" : "false"));
 286                         if (hdw->state_encoder_runok) {
 287                                 hdw->state_encoder_runok = 0;
 288                                 pvr2_trace(PVR2_TRACE_STBITS,
 289                                    "State bit %s <-- %s",
 290                                            "state_encoder_runok",
 291                                            (hdw->state_encoder_runok ?
 292                                             "true" : "false"));
 293                         }
 294                         pvr2_trace(
 295                                 PVR2_TRACE_ERROR_LEGS,
 296                                 "Giving up on command."
 297                                 "  This is normally recovered by the driver.");
 298                         break;
 299                 }
 300                 wrData[0] = 0x7;
 301                 for (idx = 0; idx < arg_cnt_recv; idx++) {
 302                         argp[idx] = rdData[idx+4];
 303                 }
 304
 305                 wrData[0] = 0x0;
 306                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
 307                 if (ret) break;
 308
 309         } while(0); LOCK_GIVE(hdw->ctl_lock);
 310
 311         return ret;
 312 }
 313
 314
 315 static int pvr2_encoder_vcmd(struct pvr2_hdw *hdw, int cmd,
 316                              int args, ...)
 317 {
 318         va_list vl;
 319         unsigned int idx;
 320         u32 data[12];
 321
 322         if (args > ARRAY_SIZE(data)) {
 323                 pvr2_trace(
 324                         PVR2_TRACE_ERROR_LEGS,
 325                         "Failed to write cx23416 command"
 326                         " - too many arguments"
 327                         " (was given %u limit %lu)",
 328                         args, (long unsigned) ARRAY_SIZE(data));
 329                 return -EINVAL;
 330         }
 331
 332         va_start(vl, args);
 333         for (idx = 0; idx < args; idx++) {
 334                 data[idx] = va_arg(vl, u32);
 335         }
 336         va_end(vl);
 337
 338         return pvr2_encoder_cmd(hdw,cmd,args,0,data);
 339 }
 340
 341
 342 /* This implements some extra setup for the encoder that seems to be
 343    specific to the PVR USB2 hardware. */
 344 static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw)
 345 {
 346         int ret = 0;
 347         int encMisc3Arg = 0;
 348
 349 #if 0
 350         /* This inexplicable bit happens in the Hauppage windows
 351            driver (for both 24xxx and 29xxx devices).  However I
 352            currently see no difference in behavior with or without
 353            this stuff.  Leave this here as a note of its existence,
 354            but don't use it. */
 355         LOCK_TAKE(hdw->ctl_lock); do {
 356                 u32 dat[1];
 357                 dat[0] = 0x80000640;
 358                 pvr2_encoder_write_words(hdw,0x01fe,dat,1);
 359                 pvr2_encoder_write_words(hdw,0x023e,dat,1);
 360         } while(0); LOCK_GIVE(hdw->ctl_lock);
 361 #endif
 362
 363         /* Mike Isely <isely@pobox.com> 26-Jan-2006 The windows driver
 364            sends the following list of ENC_MISC commands (for both
 365            24xxx and 29xxx devices).  Meanings are not entirely clear,
 366            however without the ENC_MISC(3,1) command then we risk
 367            random perpetual video corruption whenever the video input
 368            breaks up for a moment (like when switching channels). */
 369
 370
 371 #if 0
 372         /* This ENC_MISC(5,0) command seems to hurt 29xxx sync
 373            performance on channel changes, but is not a problem on
 374            24xxx devices. */
 375         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 5,0,0,0);
 376 #endif
 377
 378         /* This ENC_MISC(3,encMisc3Arg) command is critical - without
 379            it there will eventually be video corruption.  Also, the
 380            saa7115 case is strange - the Windows driver is passing 1
 381            regardless of device type but if we have 1 for saa7115
 382            devices the video turns sluggish.  */
 383         if (hdw->hdw_desc->flag_has_cx25840) {
 384                 encMisc3Arg = 1;
 385         } else {
 386                 encMisc3Arg = 0;
 387         }
 388         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 3,
 389                                  encMisc3Arg,0,0);
 390
 391         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 8,0,0,0);
 392
 393 #if 0
 394         /* This ENC_MISC(4,1) command is poisonous, so it is commented
 395            out.  But I'm leaving it here anyway to document its
 396            existence in the Windows driver.  The effect of this
 397            command is that apps displaying the stream become sluggish
 398            with stuttering video. */
 399         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 4,1,0,0);
 400 #endif
 401
 402         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 0,3,0,0);
 403         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4,15,0,0,0);
 404
 405         return ret;
 406 }
 407
 408 int pvr2_encoder_adjust(struct pvr2_hdw *hdw)
 409 {
 410         int ret;
 411         ret = cx2341x_update(hdw,pvr2_encoder_cmd,
 412                              (hdw->enc_cur_valid ? &hdw->enc_cur_state : NULL),
 413                              &hdw->enc_ctl_state);
 414         if (ret) {
 415                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 416                            "Error from cx2341x module code=%d",ret);
 417         } else {
 418                 memcpy(&hdw->enc_cur_state,&hdw->enc_ctl_state,
 419                        sizeof(struct cx2341x_mpeg_params));
 420                 hdw->enc_cur_valid = !0;
 421         }
 422         return ret;
 423 }
 424
 425
 426 int pvr2_encoder_configure(struct pvr2_hdw *hdw)
 427 {
 428         int ret;
 429         int val;
 430         pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure"
 431                    " (cx2341x module)");
 432         hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING;
 433         hdw->enc_ctl_state.width = hdw->res_hor_val;
 434         hdw->enc_ctl_state.height = hdw->res_ver_val;
 435         hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur & V4L2_STD_525_60) ?
 436                                       0 : 1);
 437
 438         ret = 0;
 439
 440         ret |= pvr2_encoder_prep_config(hdw);
 441
 442         /* saa7115: 0xf0 */
 443         val = 0xf0;
 444         if (hdw->hdw_desc->flag_has_cx25840) {
 445                 /* ivtv cx25840: 0x140 */
 446                 val = 0x140;
 447         }
 448
 449         if (!ret) ret = pvr2_encoder_vcmd(
 450                 hdw,CX2341X_ENC_SET_NUM_VSYNC_LINES, 2,
 451                 val, val);
 452
 453         /* setup firmware to notify us about some events (don't know why...) */
 454         if (!ret) ret = pvr2_encoder_vcmd(
 455                 hdw,CX2341X_ENC_SET_EVENT_NOTIFICATION, 4,
 456                 0, 0, 0x10000000, 0xffffffff);
 457
 458         if (!ret) ret = pvr2_encoder_vcmd(
 459                 hdw,CX2341X_ENC_SET_VBI_LINE, 5,
 460                 0xffffffff,0,0,0,0);
 461
 462         if (ret) {
 463                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 464                            "Failed to configure cx23416");
 465                 return ret;
 466         }
 467
 468         ret = pvr2_encoder_adjust(hdw);
 469         if (ret) return ret;
 470
 471         ret = pvr2_encoder_vcmd(
 472                 hdw, CX2341X_ENC_INITIALIZE_INPUT, 0);
 473
 474         if (ret) {
 475                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 476                            "Failed to initialize cx23416 video input");
 477                 return ret;
 478         }
 479
 480         return 0;
 481 }
 482
 483
 484 int pvr2_encoder_start(struct pvr2_hdw *hdw)
 485 {
 486         int status;
 487
 488         /* unmask some interrupts */
 489         pvr2_write_register(hdw, 0x0048, 0xbfffffff);
 490
 491         pvr2_encoder_vcmd(hdw,CX2341X_ENC_MUTE_VIDEO,1,
 492                           hdw->input_val == PVR2_CVAL_INPUT_RADIO ? 1 : 0);
 493
 494         switch (hdw->active_stream_type) {
 495         case pvr2_config_vbi:
 496                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 497                                            0x01,0x14);
 498                 break;
 499         case pvr2_config_mpeg:
 500                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 501                                            0,0x13);
 502                 break;
 503         default: /* Unhandled cases for now */
 504                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 505                                            0,0x13);
 506                 break;
 507         }
 508         return status;
 509 }
 510
 511 int pvr2_encoder_stop(struct pvr2_hdw *hdw)
 512 {
 513         int status;
 514
 515         /* mask all interrupts */
 516         pvr2_write_register(hdw, 0x0048, 0xffffffff);
 517
 518         switch (hdw->active_stream_type) {
 519         case pvr2_config_vbi:
 520                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 521                                            0x01,0x01,0x14);
 522                 break;
 523         case pvr2_config_mpeg:
 524                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 525                                            0x01,0,0x13);
 526                 break;
 527         default: /* Unhandled cases for now */
 528                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 529                                            0x01,0,0x13);
 530                 break;
 531         }
 532
 533         return status;
 534 }
 535
 536
 537 /*
 538   Stuff for Emacs to see, in order to encourage consistent editing style:
 539   *** Local Variables: ***
 540   *** mode: c ***
 541   *** fill-column: 70 ***
 542   *** tab-width: 8 ***
 543   *** c-basic-offset: 8 ***
 544   *** End: ***
 545   */