git.oblomov.eu Git - linux-2.6/blob - drivers/isdn/gigaset/bas-gigaset.c

   1 /*
   2  * USB driver for Gigaset 307x base via direct USB connection.
   3  *
   4  * Copyright (c) 2001 by Hansjoerg Lipp <hjlipp@web.de>,
   5  *                       Tilman Schmidt <tilman@imap.cc>,
   6  *                       Stefan Eilers.
   7  *
   8  * =====================================================================
   9  *      This program is free software; you can redistribute it and/or
  10  *      modify it under the terms of the GNU General Public License as
  11  *      published by the Free Software Foundation; either version 2 of
  12  *      the License, or (at your option) any later version.
  13  * =====================================================================
  14  */
  15
  16 #include "gigaset.h"
  17
  18 #include <linux/errno.h>
  19 #include <linux/init.h>
  20 #include <linux/slab.h>
  21 #include <linux/timer.h>
  22 #include <linux/usb.h>
  23 #include <linux/module.h>
  24 #include <linux/moduleparam.h>
  25
  26 /* Version Information */
  27 #define DRIVER_AUTHOR "Tilman Schmidt <tilman@imap.cc>, Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
  28 #define DRIVER_DESC "USB Driver for Gigaset 307x"
  29
  30
  31 /* Module parameters */
  32
  33 static int startmode = SM_ISDN;
  34 static int cidmode = 1;
  35
  36 module_param(startmode, int, S_IRUGO);
  37 module_param(cidmode, int, S_IRUGO);
  38 MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
  39 MODULE_PARM_DESC(cidmode, "Call-ID mode");
  40
  41 #define GIGASET_MINORS     1
  42 #define GIGASET_MINOR      16
  43 #define GIGASET_MODULENAME "bas_gigaset"
  44 #define GIGASET_DEVNAME    "ttyGB"
  45
  46 /* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
  47 #define IF_WRITEBUF 264
  48
  49 /* Values for the Gigaset 307x */
  50 #define USB_GIGA_VENDOR_ID      0x0681
  51 #define USB_3070_PRODUCT_ID     0x0001
  52 #define USB_3075_PRODUCT_ID     0x0002
  53 #define USB_SX303_PRODUCT_ID    0x0021
  54 #define USB_SX353_PRODUCT_ID    0x0022
  55
  56 /* table of devices that work with this driver */
  57 static struct usb_device_id gigaset_table [] = {
  58         { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
  59         { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
  60         { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
  61         { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) },
  62         { } /* Terminating entry */
  63 };
  64
  65 MODULE_DEVICE_TABLE(usb, gigaset_table);
  66
  67 /*======================= local function prototypes ==========================*/
  68
  69 /* function called if a new device belonging to this driver is connected */
  70 static int gigaset_probe(struct usb_interface *interface,
  71                          const struct usb_device_id *id);
  72
  73 /* Function will be called if the device is unplugged */
  74 static void gigaset_disconnect(struct usb_interface *interface);
  75
  76 static int atread_submit(struct cardstate *, int);
  77 static void stopurbs(struct bas_bc_state *);
  78 static int req_submit(struct bc_state *, int, int, int);
  79 static int atwrite_submit(struct cardstate *, unsigned char *, int);
  80 static int start_cbsend(struct cardstate *);
  81
  82 /*============================================================================*/
  83
  84 struct bas_cardstate {
  85         struct usb_device       *udev;          /* USB device pointer */
  86         struct usb_interface    *interface;     /* interface for this device */
  87         unsigned char           minor;          /* starting minor number */
  88
  89         struct urb              *urb_ctrl;      /* control pipe default URB */
  90         struct usb_ctrlrequest  dr_ctrl;
  91         struct timer_list       timer_ctrl;     /* control request timeout */
  92         int                     retry_ctrl;
  93
  94         struct timer_list       timer_atrdy;    /* AT command ready timeout */
  95         struct urb              *urb_cmd_out;   /* for sending AT commands */
  96         struct usb_ctrlrequest  dr_cmd_out;
  97         int                     retry_cmd_out;
  98
  99         struct urb              *urb_cmd_in;    /* for receiving AT replies */
 100         struct usb_ctrlrequest  dr_cmd_in;
 101         struct timer_list       timer_cmd_in;   /* receive request timeout */
 102         unsigned char           *rcvbuf;        /* AT reply receive buffer */
 103
 104         struct urb              *urb_int_in;    /* URB for interrupt pipe */
 105         unsigned char           int_in_buf[3];
 106
 107         spinlock_t              lock;           /* locks all following */
 108         atomic_t                basstate;       /* bitmap (BS_*) */
 109         int                     pending;        /* uncompleted base request */
 110         int                     rcvbuf_size;    /* size of AT receive buffer */
 111                                                 /* 0: no receive in progress */
 112         int                     retry_cmd_in;   /* receive req retry count */
 113 };
 114
 115 /* status of direct USB connection to 307x base (bits in basstate) */
 116 #define BS_ATOPEN       0x001   /* AT channel open */
 117 #define BS_B1OPEN       0x002   /* B channel 1 open */
 118 #define BS_B2OPEN       0x004   /* B channel 2 open */
 119 #define BS_ATREADY      0x008   /* base ready for AT command */
 120 #define BS_INIT         0x010   /* base has signalled INIT_OK */
 121 #define BS_ATTIMER      0x020   /* waiting for HD_READY_SEND_ATDATA */
 122 #define BS_ATRDPEND     0x040   /* urb_cmd_in in use */
 123 #define BS_ATWRPEND     0x080   /* urb_cmd_out in use */
 124
 125
 126 static struct gigaset_driver *driver = NULL;
 127 static struct cardstate *cardstate = NULL;
 128
 129 /* usb specific object needed to register this driver with the usb subsystem */
 130 static struct usb_driver gigaset_usb_driver = {
 131         .name =         GIGASET_MODULENAME,
 132         .probe =        gigaset_probe,
 133         .disconnect =   gigaset_disconnect,
 134         .id_table =     gigaset_table,
 135 };
 136
 137 /* get message text for usb_submit_urb return code
 138  */
 139 static char *get_usb_rcmsg(int rc)
 140 {
 141         static char unkmsg[28];
 142
 143         switch (rc) {
 144         case 0:
 145                 return "success";
 146         case -ENOMEM:
 147                 return "out of memory";
 148         case -ENODEV:
 149                 return "device not present";
 150         case -ENOENT:
 151                 return "endpoint not present";
 152         case -ENXIO:
 153                 return "URB type not supported";
 154         case -EINVAL:
 155                 return "invalid argument";
 156         case -EAGAIN:
 157                 return "start frame too early or too much scheduled";
 158         case -EFBIG:
 159                 return "too many isochronous frames requested";
 160         case -EPIPE:
 161                 return "endpoint stalled";
 162         case -EMSGSIZE:
 163                 return "invalid packet size";
 164         case -ENOSPC:
 165                 return "would overcommit USB bandwidth";
 166         case -ESHUTDOWN:
 167                 return "device shut down";
 168         case -EPERM:
 169                 return "reject flag set";
 170         case -EHOSTUNREACH:
 171                 return "device suspended";
 172         default:
 173                 snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", rc);
 174                 return unkmsg;
 175         }
 176 }
 177
 178 /* get message text for USB status code
 179  */
 180 static char *get_usb_statmsg(int status)
 181 {
 182         static char unkmsg[28];
 183
 184         switch (status) {
 185         case 0:
 186                 return "success";
 187         case -ENOENT:
 188                 return "unlinked (sync)";
 189         case -EINPROGRESS:
 190                 return "pending";
 191         case -EPROTO:
 192                 return "bit stuffing error, timeout, or unknown USB error";
 193         case -EILSEQ:
 194                 return "CRC mismatch, timeout, or unknown USB error";
 195         case -ETIME:
 196                 return "timed out";
 197         case -EPIPE:
 198                 return "endpoint stalled";
 199         case -ECOMM:
 200                 return "IN buffer overrun";
 201         case -ENOSR:
 202                 return "OUT buffer underrun";
 203         case -EOVERFLOW:
 204                 return "too much data";
 205         case -EREMOTEIO:
 206                 return "short packet detected";
 207         case -ENODEV:
 208                 return "device removed";
 209         case -EXDEV:
 210                 return "partial isochronous transfer";
 211         case -EINVAL:
 212                 return "invalid argument";
 213         case -ECONNRESET:
 214                 return "unlinked (async)";
 215         case -ESHUTDOWN:
 216                 return "device shut down";
 217         default:
 218                 snprintf(unkmsg, sizeof(unkmsg), "unknown status %d", status);
 219                 return unkmsg;
 220         }
 221 }
 222
 223 /* usb_pipetype_str
 224  * retrieve string representation of USB pipe type
 225  */
 226 static inline char *usb_pipetype_str(int pipe)
 227 {
 228         if (usb_pipeisoc(pipe))
 229                 return "Isoc";
 230         if (usb_pipeint(pipe))
 231                 return "Int";
 232         if (usb_pipecontrol(pipe))
 233                 return "Ctrl";
 234         if (usb_pipebulk(pipe))
 235                 return "Bulk";
 236         return "?";
 237 }
 238
 239 /* dump_urb
 240  * write content of URB to syslog for debugging
 241  */
 242 static inline void dump_urb(enum debuglevel level, const char *tag,
 243                             struct urb *urb)
 244 {
 245 #ifdef CONFIG_GIGASET_DEBUG
 246         int i;
 247         gig_dbg(level, "%s urb(0x%08lx)->{", tag, (unsigned long) urb);
 248         if (urb) {
 249                 gig_dbg(level,
 250                         "  dev=0x%08lx, pipe=%s:EP%d/DV%d:%s, "
 251                         "status=%d, hcpriv=0x%08lx, transfer_flags=0x%x,",
 252                         (unsigned long) urb->dev,
 253                         usb_pipetype_str(urb->pipe),
 254                         usb_pipeendpoint(urb->pipe), usb_pipedevice(urb->pipe),
 255                         usb_pipein(urb->pipe) ? "in" : "out",
 256                         urb->status, (unsigned long) urb->hcpriv,
 257                         urb->transfer_flags);
 258                 gig_dbg(level,
 259                         "  transfer_buffer=0x%08lx[%d], actual_length=%d, "
 260                         "bandwidth=%d, setup_packet=0x%08lx,",
 261                         (unsigned long) urb->transfer_buffer,
 262                         urb->transfer_buffer_length, urb->actual_length,
 263                         urb->bandwidth, (unsigned long) urb->setup_packet);
 264                 gig_dbg(level,
 265                         "  start_frame=%d, number_of_packets=%d, interval=%d, "
 266                         "error_count=%d,",
 267                         urb->start_frame, urb->number_of_packets, urb->interval,
 268                         urb->error_count);
 269                 gig_dbg(level,
 270                         "  context=0x%08lx, complete=0x%08lx, "
 271                         "iso_frame_desc[]={",
 272                         (unsigned long) urb->context,
 273                         (unsigned long) urb->complete);
 274                 for (i = 0; i < urb->number_of_packets; i++) {
 275                         struct usb_iso_packet_descriptor *pifd
 276                                 = &urb->iso_frame_desc[i];
 277                         gig_dbg(level,
 278                                 "    {offset=%u, length=%u, actual_length=%u, "
 279                                 "status=%u}",
 280                                 pifd->offset, pifd->length, pifd->actual_length,
 281                                 pifd->status);
 282                 }
 283         }
 284         gig_dbg(level, "}}");
 285 #endif
 286 }
 287
 288 /* read/set modem control bits etc. (m10x only) */
 289 static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
 290                                   unsigned new_state)
 291 {
 292         return -EINVAL;
 293 }
 294
 295 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
 296 {
 297         return -EINVAL;
 298 }
 299
 300 static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 301 {
 302         return -EINVAL;
 303 }
 304
 305 /* error_hangup
 306  * hang up any existing connection because of an unrecoverable error
 307  * This function may be called from any context and takes care of scheduling
 308  * the necessary actions for execution outside of interrupt context.
 309  * cs->lock must not be held.
 310  * argument:
 311  *      B channel control structure
 312  */
 313 static inline void error_hangup(struct bc_state *bcs)
 314 {
 315         struct cardstate *cs = bcs->cs;
 316
 317         gig_dbg(DEBUG_ANY, "%s: scheduling HUP for channel %d",
 318                 __func__, bcs->channel);
 319
 320         if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL))
 321                 dev_err(cs->dev, "event queue full\n");
 322
 323         gigaset_schedule_event(cs);
 324 }
 325
 326 /* error_reset
 327  * reset Gigaset device because of an unrecoverable error
 328  * This function may be called from any context, and takes care of
 329  * scheduling the necessary actions for execution outside of interrupt context.
 330  * cs->lock must not be held.
 331  * argument:
 332  *      controller state structure
 333  */
 334 static inline void error_reset(struct cardstate *cs)
 335 {
 336         /* close AT command channel to recover (ignore errors) */
 337         req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
 338
 339         //FIXME try to recover without bothering the user
 340         dev_err(cs->dev,
 341             "unrecoverable error - please disconnect Gigaset base to reset\n");
 342 }
 343
 344 /* check_pending
 345  * check for completion of pending control request
 346  * parameter:
 347  *      ucs     hardware specific controller state structure
 348  */
 349 static void check_pending(struct bas_cardstate *ucs)
 350 {
 351         unsigned long flags;
 352
 353         spin_lock_irqsave(&ucs->lock, flags);
 354         switch (ucs->pending) {
 355         case 0:
 356                 break;
 357         case HD_OPEN_ATCHANNEL:
 358                 if (atomic_read(&ucs->basstate) & BS_ATOPEN)
 359                         ucs->pending = 0;
 360                 break;
 361         case HD_OPEN_B1CHANNEL:
 362                 if (atomic_read(&ucs->basstate) & BS_B1OPEN)
 363                         ucs->pending = 0;
 364                 break;
 365         case HD_OPEN_B2CHANNEL:
 366                 if (atomic_read(&ucs->basstate) & BS_B2OPEN)
 367                         ucs->pending = 0;
 368                 break;
 369         case HD_CLOSE_ATCHANNEL:
 370                 if (!(atomic_read(&ucs->basstate) & BS_ATOPEN))
 371                         ucs->pending = 0;
 372                 break;
 373         case HD_CLOSE_B1CHANNEL:
 374                 if (!(atomic_read(&ucs->basstate) & BS_B1OPEN))
 375                         ucs->pending = 0;
 376                 break;
 377         case HD_CLOSE_B2CHANNEL:
 378                 if (!(atomic_read(&ucs->basstate) & BS_B2OPEN))
 379                         ucs->pending = 0;
 380                 break;
 381         case HD_DEVICE_INIT_ACK:                /* no reply expected */
 382                 ucs->pending = 0;
 383                 break;
 384         /* HD_READ_ATMESSAGE, HD_WRITE_ATMESSAGE, HD_RESET_INTERRUPTPIPE
 385          * are handled separately and should never end up here
 386          */
 387         default:
 388                 dev_warn(&ucs->interface->dev,
 389                          "unknown pending request 0x%02x cleared\n",
 390                          ucs->pending);
 391                 ucs->pending = 0;
 392         }
 393
 394         if (!ucs->pending)
 395                 del_timer(&ucs->timer_ctrl);
 396
 397         spin_unlock_irqrestore(&ucs->lock, flags);
 398 }
 399
 400 /* cmd_in_timeout
 401  * timeout routine for command input request
 402  * argument:
 403  *      controller state structure
 404  */
 405 static void cmd_in_timeout(unsigned long data)
 406 {
 407         struct cardstate *cs = (struct cardstate *) data;
 408         struct bas_cardstate *ucs = cs->hw.bas;
 409         int rc;
 410
 411         if (!ucs->rcvbuf_size) {
 412                 gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__);
 413                 return;
 414         }
 415
 416         if (ucs->retry_cmd_in++ < BAS_RETRY) {
 417                 dev_notice(cs->dev, "control read: timeout, retry %d\n",
 418                            ucs->retry_cmd_in);
 419                 rc = atread_submit(cs, BAS_TIMEOUT);
 420                 if (rc >= 0 || rc == -ENODEV)
 421                         /* resubmitted or disconnected */
 422                         /* - bypass regular exit block */
 423                         return;
 424         } else {
 425                 dev_err(cs->dev,
 426                         "control read: timeout, giving up after %d tries\n",
 427                         ucs->retry_cmd_in);
 428         }
 429         kfree(ucs->rcvbuf);
 430         ucs->rcvbuf = NULL;
 431         ucs->rcvbuf_size = 0;
 432         error_reset(cs);
 433 }
 434
 435 /* set/clear bits in base connection state, return previous state
 436  */
 437 inline static int update_basstate(struct bas_cardstate *ucs,
 438                                   int set, int clear)
 439 {
 440         unsigned long flags;
 441         int state;
 442
 443         spin_lock_irqsave(&ucs->lock, flags);
 444         state = atomic_read(&ucs->basstate);
 445         atomic_set(&ucs->basstate, (state & ~clear) | set);
 446         spin_unlock_irqrestore(&ucs->lock, flags);
 447         return state;
 448 }
 449
 450 /* read_ctrl_callback
 451  * USB completion handler for control pipe input
 452  * called by the USB subsystem in interrupt context
 453  * parameter:
 454  *      urb     USB request block
 455  *              urb->context = inbuf structure for controller state
 456  */
 457 static void read_ctrl_callback(struct urb *urb)
 458 {
 459         struct inbuf_t *inbuf = urb->context;
 460         struct cardstate *cs = inbuf->cs;
 461         struct bas_cardstate *ucs = cs->hw.bas;
 462         int have_data = 0;
 463         unsigned numbytes;
 464         int rc;
 465
 466         update_basstate(ucs, 0, BS_ATRDPEND);
 467
 468         if (!ucs->rcvbuf_size) {
 469                 dev_warn(cs->dev, "%s: no receive in progress\n", __func__);
 470                 return;
 471         }
 472
 473         del_timer(&ucs->timer_cmd_in);
 474
 475         switch (urb->status) {
 476         case 0:                         /* normal completion */
 477                 numbytes = urb->actual_length;
 478                 if (unlikely(numbytes != ucs->rcvbuf_size)) {
 479                         dev_warn(cs->dev,
 480                                "control read: received %d chars, expected %d\n",
 481                                  numbytes, ucs->rcvbuf_size);
 482                         if (numbytes > ucs->rcvbuf_size)
 483                                 numbytes = ucs->rcvbuf_size;
 484                 }
 485
 486                 /* copy received bytes to inbuf */
 487                 have_data = gigaset_fill_inbuf(inbuf, ucs->rcvbuf, numbytes);
 488
 489                 if (unlikely(numbytes < ucs->rcvbuf_size)) {
 490                         /* incomplete - resubmit for remaining bytes */
 491                         ucs->rcvbuf_size -= numbytes;
 492                         ucs->retry_cmd_in = 0;
 493                         rc = atread_submit(cs, BAS_TIMEOUT);
 494                         if (rc >= 0 || rc == -ENODEV)
 495                                 /* resubmitted or disconnected */
 496                                 /* - bypass regular exit block */
 497                                 return;
 498                         error_reset(cs);
 499                 }
 500                 break;
 501
 502         case -ENOENT:                   /* cancelled */
 503         case -ECONNRESET:               /* cancelled (async) */
 504         case -EINPROGRESS:              /* pending */
 505         case -ENODEV:                   /* device removed */
 506         case -ESHUTDOWN:                /* device shut down */
 507                 /* no action necessary */
 508                 gig_dbg(DEBUG_USBREQ, "%s: %s",
 509                         __func__, get_usb_statmsg(urb->status));
 510                 break;
 511
 512         default:                        /* severe trouble */
 513                 dev_warn(cs->dev, "control read: %s\n",
 514                          get_usb_statmsg(urb->status));
 515                 if (ucs->retry_cmd_in++ < BAS_RETRY) {
 516                         dev_notice(cs->dev, "control read: retry %d\n",
 517                                    ucs->retry_cmd_in);
 518                         rc = atread_submit(cs, BAS_TIMEOUT);
 519                         if (rc >= 0 || rc == -ENODEV)
 520                                 /* resubmitted or disconnected */
 521                                 /* - bypass regular exit block */
 522                                 return;
 523                 } else {
 524                         dev_err(cs->dev,
 525                                 "control read: giving up after %d tries\n",
 526                                 ucs->retry_cmd_in);
 527                 }
 528                 error_reset(cs);
 529         }
 530
 531         kfree(ucs->rcvbuf);
 532         ucs->rcvbuf = NULL;
 533         ucs->rcvbuf_size = 0;
 534         if (have_data) {
 535                 gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
 536                 gigaset_schedule_event(cs);
 537         }
 538 }
 539
 540 /* atread_submit
 541  * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout
 542  * parameters:
 543  *      cs      controller state structure
 544  *      timeout timeout in 1/10 sec., 0: none
 545  * return value:
 546  *      0 on success
 547  *      -EBUSY if another request is pending
 548  *      any URB submission error code
 549  */
 550 static int atread_submit(struct cardstate *cs, int timeout)
 551 {
 552         struct bas_cardstate *ucs = cs->hw.bas;
 553         int ret;
 554
 555         gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)",
 556                 ucs->rcvbuf_size);
 557
 558         if (update_basstate(ucs, BS_ATRDPEND, 0) & BS_ATRDPEND) {
 559                 dev_err(cs->dev,
 560                         "could not submit HD_READ_ATMESSAGE: URB busy\n");
 561                 return -EBUSY;
 562         }
 563
 564         ucs->dr_cmd_in.bRequestType = IN_VENDOR_REQ;
 565         ucs->dr_cmd_in.bRequest = HD_READ_ATMESSAGE;
 566         ucs->dr_cmd_in.wValue = 0;
 567         ucs->dr_cmd_in.wIndex = 0;
 568         ucs->dr_cmd_in.wLength = cpu_to_le16(ucs->rcvbuf_size);
 569         usb_fill_control_urb(ucs->urb_cmd_in, ucs->udev,
 570                              usb_rcvctrlpipe(ucs->udev, 0),
 571                              (unsigned char*) & ucs->dr_cmd_in,
 572                              ucs->rcvbuf, ucs->rcvbuf_size,
 573                              read_ctrl_callback, cs->inbuf);
 574
 575         if ((ret = usb_submit_urb(ucs->urb_cmd_in, GFP_ATOMIC)) != 0) {
 576                 update_basstate(ucs, 0, BS_ATRDPEND);
 577                 dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
 578                         get_usb_rcmsg(ret));
 579                 return ret;
 580         }
 581
 582         if (timeout > 0) {
 583                 gig_dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
 584                 ucs->timer_cmd_in.expires = jiffies + timeout * HZ / 10;
 585                 ucs->timer_cmd_in.data = (unsigned long) cs;
 586                 ucs->timer_cmd_in.function = cmd_in_timeout;
 587                 add_timer(&ucs->timer_cmd_in);
 588         }
 589         return 0;
 590 }
 591
 592 /* read_int_callback
 593  * USB completion handler for interrupt pipe input
 594  * called by the USB subsystem in interrupt context
 595  * parameter:
 596  *      urb     USB request block
 597  *              urb->context = controller state structure
 598  */
 599 static void read_int_callback(struct urb *urb)
 600 {
 601         struct cardstate *cs = urb->context;
 602         struct bas_cardstate *ucs = cs->hw.bas;
 603         struct bc_state *bcs;
 604         unsigned long flags;
 605         int rc;
 606         unsigned l;
 607         int channel;
 608
 609         switch (urb->status) {
 610         case 0:                 /* success */
 611                 break;
 612         case -ENOENT:                   /* cancelled */
 613         case -ECONNRESET:               /* cancelled (async) */
 614         case -EINPROGRESS:              /* pending */
 615                 /* ignore silently */
 616                 gig_dbg(DEBUG_USBREQ, "%s: %s",
 617                         __func__, get_usb_statmsg(urb->status));
 618                 return;
 619         case -ENODEV:                   /* device removed */
 620         case -ESHUTDOWN:                /* device shut down */
 621                 //FIXME use this as disconnect indicator?
 622                 gig_dbg(DEBUG_USBREQ, "%s: device disconnected", __func__);
 623                 return;
 624         default:                /* severe trouble */
 625                 dev_warn(cs->dev, "interrupt read: %s\n",
 626                          get_usb_statmsg(urb->status));
 627                 //FIXME corrective action? resubmission always ok?
 628                 goto resubmit;
 629         }
 630
 631         /* drop incomplete packets even if the missing bytes wouldn't matter */
 632         if (unlikely(urb->actual_length < 3)) {
 633                 dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
 634                          urb->actual_length);
 635                 goto resubmit;
 636         }
 637
 638         l = (unsigned) ucs->int_in_buf[1] +
 639             (((unsigned) ucs->int_in_buf[2]) << 8);
 640
 641         gig_dbg(DEBUG_USBREQ, "<-------%d: 0x%02x (%u [0x%02x 0x%02x])",
 642                 urb->actual_length, (int)ucs->int_in_buf[0], l,
 643                 (int)ucs->int_in_buf[1], (int)ucs->int_in_buf[2]);
 644
 645         channel = 0;
 646
 647         switch (ucs->int_in_buf[0]) {
 648         case HD_DEVICE_INIT_OK:
 649                 update_basstate(ucs, BS_INIT, 0);
 650                 break;
 651
 652         case HD_READY_SEND_ATDATA:
 653                 del_timer(&ucs->timer_atrdy);
 654                 update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
 655                 start_cbsend(cs);
 656                 break;
 657
 658         case HD_OPEN_B2CHANNEL_ACK:
 659                 ++channel;
 660         case HD_OPEN_B1CHANNEL_ACK:
 661                 bcs = cs->bcs + channel;
 662                 update_basstate(ucs, BS_B1OPEN << channel, 0);
 663                 gigaset_bchannel_up(bcs);
 664                 break;
 665
 666         case HD_OPEN_ATCHANNEL_ACK:
 667                 update_basstate(ucs, BS_ATOPEN, 0);
 668                 start_cbsend(cs);
 669                 break;
 670
 671         case HD_CLOSE_B2CHANNEL_ACK:
 672                 ++channel;
 673         case HD_CLOSE_B1CHANNEL_ACK:
 674                 bcs = cs->bcs + channel;
 675                 update_basstate(ucs, 0, BS_B1OPEN << channel);
 676                 stopurbs(bcs->hw.bas);
 677                 gigaset_bchannel_down(bcs);
 678                 break;
 679
 680         case HD_CLOSE_ATCHANNEL_ACK:
 681                 update_basstate(ucs, 0, BS_ATOPEN);
 682                 break;
 683
 684         case HD_B2_FLOW_CONTROL:
 685                 ++channel;
 686         case HD_B1_FLOW_CONTROL:
 687                 bcs = cs->bcs + channel;
 688                 atomic_add((l - BAS_NORMFRAME) * BAS_CORRFRAMES,
 689                            &bcs->hw.bas->corrbytes);
 690                 gig_dbg(DEBUG_ISO,
 691                         "Flow control (channel %d, sub %d): 0x%02x => %d",
 692                         channel, bcs->hw.bas->numsub, l,
 693                         atomic_read(&bcs->hw.bas->corrbytes));
 694                 break;
 695
 696         case HD_RECEIVEATDATA_ACK:      /* AT response ready to be received */
 697                 if (!l) {
 698                         dev_warn(cs->dev,
 699                                 "HD_RECEIVEATDATA_ACK with length 0 ignored\n");
 700                         break;
 701                 }
 702                 spin_lock_irqsave(&cs->lock, flags);
 703                 if (ucs->rcvbuf_size) {
 704                         /* throw away previous buffer - we have no queue */
 705                         dev_err(cs->dev,
 706                                 "receive AT data overrun, %d bytes lost\n",
 707                                 ucs->rcvbuf_size);
 708                         kfree(ucs->rcvbuf);
 709                         ucs->rcvbuf_size = 0;
 710                 }
 711                 if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) {
 712                         spin_unlock_irqrestore(&cs->lock, flags);
 713                         dev_err(cs->dev, "out of memory receiving AT data\n");
 714                         error_reset(cs);
 715                         break;
 716                 }
 717                 ucs->rcvbuf_size = l;
 718                 ucs->retry_cmd_in = 0;
 719                 if ((rc = atread_submit(cs, BAS_TIMEOUT)) < 0) {
 720                         kfree(ucs->rcvbuf);
 721                         ucs->rcvbuf = NULL;
 722                         ucs->rcvbuf_size = 0;
 723                         if (rc != -ENODEV) {
 724                                 //FIXME corrective action?
 725                                 spin_unlock_irqrestore(&cs->lock, flags);
 726                                 error_reset(cs);
 727                                 break;
 728                         }
 729                 }
 730                 spin_unlock_irqrestore(&cs->lock, flags);
 731                 break;
 732
 733         case HD_RESET_INTERRUPT_PIPE_ACK:
 734                 gig_dbg(DEBUG_USBREQ, "HD_RESET_INTERRUPT_PIPE_ACK");
 735                 break;
 736
 737         case HD_SUSPEND_END:
 738                 gig_dbg(DEBUG_USBREQ, "HD_SUSPEND_END");
 739                 break;
 740
 741         default:
 742                 dev_warn(cs->dev,
 743                          "unknown Gigaset signal 0x%02x (%u) ignored\n",
 744                          (int) ucs->int_in_buf[0], l);
 745         }
 746
 747         check_pending(ucs);
 748
 749 resubmit:
 750         rc = usb_submit_urb(urb, GFP_ATOMIC);
 751         if (unlikely(rc != 0 && rc != -ENODEV)) {
 752                 dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
 753                         get_usb_rcmsg(rc));
 754                 error_reset(cs);
 755         }
 756 }
 757
 758 /* read_iso_callback
 759  * USB completion handler for B channel isochronous input
 760  * called by the USB subsystem in interrupt context
 761  * parameter:
 762  *      urb     USB request block of completed request
 763  *              urb->context = bc_state structure
 764  */
 765 static void read_iso_callback(struct urb *urb)
 766 {
 767         struct bc_state *bcs;
 768         struct bas_bc_state *ubc;
 769         unsigned long flags;
 770         int i, rc;
 771
 772         /* status codes not worth bothering the tasklet with */
 773         if (unlikely(urb->status == -ENOENT ||
 774                      urb->status == -ECONNRESET ||
 775                      urb->status == -EINPROGRESS ||
 776                      urb->status == -ENODEV ||
 777                      urb->status == -ESHUTDOWN)) {
 778                 gig_dbg(DEBUG_ISO, "%s: %s",
 779                         __func__, get_usb_statmsg(urb->status));
 780                 return;
 781         }
 782
 783         bcs = urb->context;
 784         ubc = bcs->hw.bas;
 785
 786         spin_lock_irqsave(&ubc->isoinlock, flags);
 787         if (likely(ubc->isoindone == NULL)) {
 788                 /* pass URB to tasklet */
 789                 ubc->isoindone = urb;
 790                 tasklet_schedule(&ubc->rcvd_tasklet);
 791         } else {
 792                 /* tasklet still busy, drop data and resubmit URB */
 793                 ubc->loststatus = urb->status;
 794                 for (i = 0; i < BAS_NUMFRAMES; i++) {
 795                         ubc->isoinlost += urb->iso_frame_desc[i].actual_length;
 796                         if (unlikely(urb->iso_frame_desc[i].status != 0 &&
 797                                      urb->iso_frame_desc[i].status !=
 798                                                                 -EINPROGRESS))
 799                                 ubc->loststatus = urb->iso_frame_desc[i].status;
 800                         urb->iso_frame_desc[i].status = 0;
 801                         urb->iso_frame_desc[i].actual_length = 0;
 802                 }
 803                 if (likely(atomic_read(&ubc->running))) {
 804                         /* urb->dev is clobbered by USB subsystem */
 805                         urb->dev = bcs->cs->hw.bas->udev;
 806                         urb->transfer_flags = URB_ISO_ASAP;
 807                         urb->number_of_packets = BAS_NUMFRAMES;
 808                         gig_dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit",
 809                                 __func__);
 810                         rc = usb_submit_urb(urb, GFP_ATOMIC);
 811                         if (unlikely(rc != 0 && rc != -ENODEV)) {
 812                                 dev_err(bcs->cs->dev,
 813                                         "could not resubmit isochronous read "
 814                                         "URB: %s\n", get_usb_rcmsg(rc));
 815                                 dump_urb(DEBUG_ISO, "isoc read", urb);
 816                                 error_hangup(bcs);
 817                         }
 818                 }
 819         }
 820         spin_unlock_irqrestore(&ubc->isoinlock, flags);
 821 }
 822
 823 /* write_iso_callback
 824  * USB completion handler for B channel isochronous output
 825  * called by the USB subsystem in interrupt context
 826  * parameter:
 827  *      urb     USB request block of completed request
 828  *              urb->context = isow_urbctx_t structure
 829  */
 830 static void write_iso_callback(struct urb *urb)
 831 {
 832         struct isow_urbctx_t *ucx;
 833         struct bas_bc_state *ubc;
 834         unsigned long flags;
 835
 836         /* status codes not worth bothering the tasklet with */
 837         if (unlikely(urb->status == -ENOENT ||
 838                      urb->status == -ECONNRESET ||
 839                      urb->status == -EINPROGRESS ||
 840                      urb->status == -ENODEV ||
 841                      urb->status == -ESHUTDOWN)) {
 842                 gig_dbg(DEBUG_ISO, "%s: %s",
 843                         __func__, get_usb_statmsg(urb->status));
 844                 return;
 845         }
 846
 847         /* pass URB context to tasklet */
 848         ucx = urb->context;
 849         ubc = ucx->bcs->hw.bas;
 850
 851         spin_lock_irqsave(&ubc->isooutlock, flags);
 852         ubc->isooutovfl = ubc->isooutdone;
 853         ubc->isooutdone = ucx;
 854         spin_unlock_irqrestore(&ubc->isooutlock, flags);
 855         tasklet_schedule(&ubc->sent_tasklet);
 856 }
 857
 858 /* starturbs
 859  * prepare and submit USB request blocks for isochronous input and output
 860  * argument:
 861  *      B channel control structure
 862  * return value:
 863  *      0 on success
 864  *      < 0 on error (no URBs submitted)
 865  */
 866 static int starturbs(struct bc_state *bcs)
 867 {
 868         struct bas_bc_state *ubc = bcs->hw.bas;
 869         struct urb *urb;
 870         int j, k;
 871         int rc;
 872
 873         /* initialize L2 reception */
 874         if (bcs->proto2 == ISDN_PROTO_L2_HDLC)
 875                 bcs->inputstate |= INS_flag_hunt;
 876
 877         /* submit all isochronous input URBs */
 878         atomic_set(&ubc->running, 1);
 879         for (k = 0; k < BAS_INURBS; k++) {
 880                 urb = ubc->isoinurbs[k];
 881                 if (!urb) {
 882                         rc = -EFAULT;
 883                         goto error;
 884                 }
 885
 886                 urb->dev = bcs->cs->hw.bas->udev;
 887                 urb->pipe = usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel);
 888                 urb->transfer_flags = URB_ISO_ASAP;
 889                 urb->transfer_buffer = ubc->isoinbuf + k * BAS_INBUFSIZE;
 890                 urb->transfer_buffer_length = BAS_INBUFSIZE;
 891                 urb->number_of_packets = BAS_NUMFRAMES;
 892                 urb->interval = BAS_FRAMETIME;
 893                 urb->complete = read_iso_callback;
 894                 urb->context = bcs;
 895                 for (j = 0; j < BAS_NUMFRAMES; j++) {
 896                         urb->iso_frame_desc[j].offset = j * BAS_MAXFRAME;
 897                         urb->iso_frame_desc[j].length = BAS_MAXFRAME;
 898                         urb->iso_frame_desc[j].status = 0;
 899                         urb->iso_frame_desc[j].actual_length = 0;
 900                 }
 901
 902                 dump_urb(DEBUG_ISO, "Initial isoc read", urb);
 903                 if ((rc = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
 904                         goto error;
 905         }
 906
 907         /* initialize L2 transmission */
 908         gigaset_isowbuf_init(ubc->isooutbuf, PPP_FLAG);
 909
 910         /* set up isochronous output URBs for flag idling */
 911         for (k = 0; k < BAS_OUTURBS; ++k) {
 912                 urb = ubc->isoouturbs[k].urb;
 913                 if (!urb) {
 914                         rc = -EFAULT;
 915                         goto error;
 916                 }
 917                 urb->dev = bcs->cs->hw.bas->udev;
 918                 urb->pipe = usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel);
 919                 urb->transfer_flags = URB_ISO_ASAP;
 920                 urb->transfer_buffer = ubc->isooutbuf->data;
 921                 urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
 922                 urb->number_of_packets = BAS_NUMFRAMES;
 923                 urb->interval = BAS_FRAMETIME;
 924                 urb->complete = write_iso_callback;
 925                 urb->context = &ubc->isoouturbs[k];
 926                 for (j = 0; j < BAS_NUMFRAMES; ++j) {
 927                         urb->iso_frame_desc[j].offset = BAS_OUTBUFSIZE;
 928                         urb->iso_frame_desc[j].length = BAS_NORMFRAME;
 929                         urb->iso_frame_desc[j].status = 0;
 930                         urb->iso_frame_desc[j].actual_length = 0;
 931                 }
 932                 ubc->isoouturbs[k].limit = -1;
 933         }
 934
 935         /* submit two URBs, keep third one */
 936         for (k = 0; k < 2; ++k) {
 937                 dump_urb(DEBUG_ISO, "Initial isoc write", urb);
 938                 rc = usb_submit_urb(ubc->isoouturbs[k].urb, GFP_ATOMIC);
 939                 if (rc != 0)
 940                         goto error;
 941         }
 942         dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb);
 943         ubc->isooutfree = &ubc->isoouturbs[2];
 944         ubc->isooutdone = ubc->isooutovfl = NULL;
 945         return 0;
 946  error:
 947         stopurbs(ubc);
 948         return rc;
 949 }
 950
 951 /* stopurbs
 952  * cancel the USB request blocks for isochronous input and output
 953  * errors are silently ignored
 954  * argument:
 955  *      B channel control structure
 956  */
 957 static void stopurbs(struct bas_bc_state *ubc)
 958 {
 959         int k, rc;
 960
 961         atomic_set(&ubc->running, 0);
 962
 963         for (k = 0; k < BAS_INURBS; ++k) {
 964                 rc = usb_unlink_urb(ubc->isoinurbs[k]);
 965                 gig_dbg(DEBUG_ISO,
 966                         "%s: isoc input URB %d unlinked, result = %s",
 967                         __func__, k, get_usb_rcmsg(rc));
 968         }
 969
 970         for (k = 0; k < BAS_OUTURBS; ++k) {
 971                 rc = usb_unlink_urb(ubc->isoouturbs[k].urb);
 972                 gig_dbg(DEBUG_ISO,
 973                         "%s: isoc output URB %d unlinked, result = %s",
 974                         __func__, k, get_usb_rcmsg(rc));
 975         }
 976 }
 977
 978 /* Isochronous Write - Bottom Half */
 979 /* =============================== */
 980
 981 /* submit_iso_write_urb
 982  * fill and submit the next isochronous write URB
 983  * parameters:
 984  *      ucx     context structure containing URB
 985  * return value:
 986  *      number of frames submitted in URB
 987  *      0 if URB not submitted because no data available (isooutbuf busy)
 988  *      error code < 0 on error
 989  */
 990 static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
 991 {
 992         struct urb *urb = ucx->urb;
 993         struct bas_bc_state *ubc = ucx->bcs->hw.bas;
 994         struct usb_iso_packet_descriptor *ifd;
 995         int corrbytes, nframe, rc;
 996
 997         /* urb->dev is clobbered by USB subsystem */
 998         urb->dev = ucx->bcs->cs->hw.bas->udev;
 999         urb->transfer_flags = URB_ISO_ASAP;
1000         urb->transfer_buffer = ubc->isooutbuf->data;
1001         urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
1002
1003         for (nframe = 0; nframe < BAS_NUMFRAMES; nframe++) {
1004                 ifd = &urb->iso_frame_desc[nframe];
1005
1006                 /* compute frame length according to flow control */
1007                 ifd->length = BAS_NORMFRAME;
1008                 if ((corrbytes = atomic_read(&ubc->corrbytes)) != 0) {
1009                         gig_dbg(DEBUG_ISO, "%s: corrbytes=%d",
1010                                 __func__, corrbytes);
1011                         if (corrbytes > BAS_HIGHFRAME - BAS_NORMFRAME)
1012                                 corrbytes = BAS_HIGHFRAME - BAS_NORMFRAME;
1013                         else if (corrbytes < BAS_LOWFRAME - BAS_NORMFRAME)
1014                                 corrbytes = BAS_LOWFRAME - BAS_NORMFRAME;
1015                         ifd->length += corrbytes;
1016                         atomic_add(-corrbytes, &ubc->corrbytes);
1017                 }
1018
1019                 /* retrieve block of data to send */
1020                 ifd->offset = gigaset_isowbuf_getbytes(ubc->isooutbuf,
1021                                                        ifd->length);
1022                 if (ifd->offset < 0) {
1023                         if (ifd->offset == -EBUSY) {
1024                                 gig_dbg(DEBUG_ISO,
1025                                         "%s: buffer busy at frame %d",
1026                                         __func__, nframe);
1027                                 /* tasklet will be restarted from
1028                                    gigaset_send_skb() */
1029                         } else {
1030                                 dev_err(ucx->bcs->cs->dev,
1031                                         "%s: buffer error %d at frame %d\n",
1032                                         __func__, ifd->offset, nframe);
1033                                 return ifd->offset;
1034                         }
1035                         break;
1036                 }
1037                 ucx->limit = atomic_read(&ubc->isooutbuf->nextread);
1038                 ifd->status = 0;
1039                 ifd->actual_length = 0;
1040         }
1041         if (unlikely(nframe == 0))
1042                 return 0;       /* no data to send */
1043         urb->number_of_packets = nframe;
1044
1045         rc = usb_submit_urb(urb, GFP_ATOMIC);
1046         if (unlikely(rc)) {
1047                 if (rc == -ENODEV)
1048                         /* device removed - give up silently */
1049                         gig_dbg(DEBUG_ISO, "%s: disconnected", __func__);
1050                 else
1051                         dev_err(ucx->bcs->cs->dev,
1052                                 "could not submit isochronous write URB: %s\n",
1053                                 get_usb_rcmsg(rc));
1054                 return rc;
1055         }
1056         ++ubc->numsub;
1057         return nframe;
1058 }
1059
1060 /* write_iso_tasklet
1061  * tasklet scheduled when an isochronous output URB from the Gigaset device
1062  * has completed
1063  * parameter:
1064  *      data    B channel state structure
1065  */
1066 static void write_iso_tasklet(unsigned long data)
1067 {
1068         struct bc_state *bcs = (struct bc_state *) data;
1069         struct bas_bc_state *ubc = bcs->hw.bas;
1070         struct cardstate *cs = bcs->cs;
1071         struct isow_urbctx_t *done, *next, *ovfl;
1072         struct urb *urb;
1073         struct usb_iso_packet_descriptor *ifd;
1074         int offset;
1075         unsigned long flags;
1076         int i;
1077         struct sk_buff *skb;
1078         int len;
1079         int rc;
1080
1081         /* loop while completed URBs arrive in time */
1082         for (;;) {
1083                 if (unlikely(!(atomic_read(&ubc->running)))) {
1084                         gig_dbg(DEBUG_ISO, "%s: not running", __func__);
1085                         return;
1086                 }
1087
1088                 /* retrieve completed URBs */
1089                 spin_lock_irqsave(&ubc->isooutlock, flags);
1090                 done = ubc->isooutdone;
1091                 ubc->isooutdone = NULL;
1092                 ovfl = ubc->isooutovfl;
1093                 ubc->isooutovfl = NULL;
1094                 spin_unlock_irqrestore(&ubc->isooutlock, flags);
1095                 if (ovfl) {
1096                         dev_err(cs->dev, "isochronous write buffer underrun\n");
1097                         error_hangup(bcs);
1098                         break;
1099                 }
1100                 if (!done)
1101                         break;
1102
1103                 /* submit free URB if available */
1104                 spin_lock_irqsave(&ubc->isooutlock, flags);
1105                 next = ubc->isooutfree;
1106                 ubc->isooutfree = NULL;
1107                 spin_unlock_irqrestore(&ubc->isooutlock, flags);
1108                 if (next) {
1109                         rc = submit_iso_write_urb(next);
1110                         if (unlikely(rc <= 0 && rc != -ENODEV)) {
1111                                 /* could not submit URB, put it back */
1112                                 spin_lock_irqsave(&ubc->isooutlock, flags);
1113                                 if (ubc->isooutfree == NULL) {
1114                                         ubc->isooutfree = next;
1115                                         next = NULL;
1116                                 }
1117                                 spin_unlock_irqrestore(&ubc->isooutlock, flags);
1118                                 if (next) {
1119                                         /* couldn't put it back */
1120                                         dev_err(cs->dev,
1121                                               "losing isochronous write URB\n");
1122                                         error_hangup(bcs);
1123                                 }
1124                         }
1125                 }
1126
1127                 /* process completed URB */
1128                 urb = done->urb;
1129                 switch (urb->status) {
1130                 case -EXDEV:                    /* partial completion */
1131                         gig_dbg(DEBUG_ISO, "%s: URB partially completed",
1132                                 __func__);
1133                         /* fall through - what's the difference anyway? */
1134                 case 0:                         /* normal completion */
1135                         /* inspect individual frames
1136                          * assumptions (for lack of documentation):
1137                          * - actual_length bytes of first frame in error are
1138                          *   successfully sent
1139                          * - all following frames are not sent at all
1140                          */
1141                         offset = done->limit;   /* default (no error) */
1142                         for (i = 0; i < BAS_NUMFRAMES; i++) {
1143                                 ifd = &urb->iso_frame_desc[i];
1144                                 if (ifd->status ||
1145                                     ifd->actual_length != ifd->length) {
1146                                         dev_warn(cs->dev,
1147                                              "isochronous write: frame %d: %s, "
1148                                              "only %d of %d bytes sent\n",
1149                                              i, get_usb_statmsg(ifd->status),
1150                                              ifd->actual_length, ifd->length);
1151                                         offset = (ifd->offset +
1152                                                   ifd->actual_length)
1153                                                  % BAS_OUTBUFSIZE;
1154                                         break;
1155                                 }
1156                         }
1157 #ifdef CONFIG_GIGASET_DEBUG
1158                         /* check assumption on remaining frames */
1159                         for (; i < BAS_NUMFRAMES; i++) {
1160                                 ifd = &urb->iso_frame_desc[i];
1161                                 if (ifd->status != -EINPROGRESS
1162                                     || ifd->actual_length != 0) {
1163                                         dev_warn(cs->dev,
1164                                              "isochronous write: frame %d: %s, "
1165                                              "%d of %d bytes sent\n",
1166                                              i, get_usb_statmsg(ifd->status),
1167                                              ifd->actual_length, ifd->length);
1168                                         offset = (ifd->offset +
1169                                                   ifd->actual_length)
1170                                                  % BAS_OUTBUFSIZE;
1171                                         break;
1172                                 }
1173                         }
1174 #endif
1175                         break;
1176                 case -EPIPE:                    /* stall - probably underrun */
1177                         dev_err(cs->dev, "isochronous write stalled\n");
1178                         error_hangup(bcs);
1179                         break;
1180                 default:                        /* severe trouble */
1181                         dev_warn(cs->dev, "isochronous write: %s\n",
1182                                  get_usb_statmsg(urb->status));
1183                 }
1184
1185                 /* mark the write buffer area covered by this URB as free */
1186                 if (done->limit >= 0)
1187                         atomic_set(&ubc->isooutbuf->read, done->limit);
1188
1189                 /* mark URB as free */
1190                 spin_lock_irqsave(&ubc->isooutlock, flags);
1191                 next = ubc->isooutfree;
1192                 ubc->isooutfree = done;
1193                 spin_unlock_irqrestore(&ubc->isooutlock, flags);
1194                 if (next) {
1195                         /* only one URB still active - resubmit one */
1196                         rc = submit_iso_write_urb(next);
1197                         if (unlikely(rc <= 0 && rc != -ENODEV)) {
1198                                 /* couldn't submit */
1199                                 error_hangup(bcs);
1200                         }
1201                 }
1202         }
1203
1204         /* process queued SKBs */
1205         while ((skb = skb_dequeue(&bcs->squeue))) {
1206                 /* copy to output buffer, doing L2 encapsulation */
1207                 len = skb->len;
1208                 if (gigaset_isoc_buildframe(bcs, skb->data, len) == -EAGAIN) {
1209                         /* insufficient buffer space, push back onto queue */
1210                         skb_queue_head(&bcs->squeue, skb);
1211                         gig_dbg(DEBUG_ISO, "%s: skb requeued, qlen=%d",
1212                                 __func__, skb_queue_len(&bcs->squeue));
1213                         break;
1214                 }
1215                 skb_pull(skb, len);
1216                 gigaset_skb_sent(bcs, skb);
1217                 dev_kfree_skb_any(skb);
1218         }
1219 }
1220
1221 /* Isochronous Read - Bottom Half */
1222 /* ============================== */
1223
1224 /* read_iso_tasklet
1225  * tasklet scheduled when an isochronous input URB from the Gigaset device
1226  * has completed
1227  * parameter:
1228  *      data    B channel state structure
1229  */
1230 static void read_iso_tasklet(unsigned long data)
1231 {
1232         struct bc_state *bcs = (struct bc_state *) data;
1233         struct bas_bc_state *ubc = bcs->hw.bas;
1234         struct cardstate *cs = bcs->cs;
1235         struct urb *urb;
1236         char *rcvbuf;
1237         unsigned long flags;
1238         int totleft, numbytes, offset, frame, rc;
1239
1240         /* loop while more completed URBs arrive in the meantime */
1241         for (;;) {
1242                 /* retrieve URB */
1243                 spin_lock_irqsave(&ubc->isoinlock, flags);
1244                 if (!(urb = ubc->isoindone)) {
1245                         spin_unlock_irqrestore(&ubc->isoinlock, flags);
1246                         return;
1247                 }
1248                 ubc->isoindone = NULL;
1249                 if (unlikely(ubc->loststatus != -EINPROGRESS)) {
1250                         dev_warn(cs->dev,
1251                                  "isochronous read overrun, "
1252                                  "dropped URB with status: %s, %d bytes lost\n",
1253                                  get_usb_statmsg(ubc->loststatus),
1254                                  ubc->isoinlost);
1255                         ubc->loststatus = -EINPROGRESS;
1256                 }
1257                 spin_unlock_irqrestore(&ubc->isoinlock, flags);
1258
1259                 if (unlikely(!(atomic_read(&ubc->running)))) {
1260                         gig_dbg(DEBUG_ISO,
1261                                 "%s: channel not running, "
1262                                 "dropped URB with status: %s",
1263                                 __func__, get_usb_statmsg(urb->status));
1264                         return;
1265                 }
1266
1267                 switch (urb->status) {
1268                 case 0:                         /* normal completion */
1269                         break;
1270                 case -EXDEV:                    /* inspect individual frames
1271                                                    (we do that anyway) */
1272                         gig_dbg(DEBUG_ISO, "%s: URB partially completed",
1273                                 __func__);
1274                         break;
1275                 case -ENOENT:
1276                 case -ECONNRESET:
1277                 case -EINPROGRESS:
1278                         gig_dbg(DEBUG_ISO, "%s: %s",
1279                                 __func__, get_usb_statmsg(urb->status));
1280                         continue;               /* -> skip */
1281                 case -EPIPE:
1282                         dev_err(cs->dev, "isochronous read stalled\n");
1283                         error_hangup(bcs);
1284                         continue;               /* -> skip */
1285                 default:                        /* severe trouble */
1286                         dev_warn(cs->dev, "isochronous read: %s\n",
1287                                  get_usb_statmsg(urb->status));
1288                         goto error;
1289                 }
1290
1291                 rcvbuf = urb->transfer_buffer;
1292                 totleft = urb->actual_length;
1293                 for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) {
1294                         if (unlikely(urb->iso_frame_desc[frame].status)) {
1295                                 dev_warn(cs->dev,
1296                                          "isochronous read: frame %d: %s\n",
1297                                          frame,
1298                                          get_usb_statmsg(
1299                                             urb->iso_frame_desc[frame].status));
1300                                 break;
1301                         }
1302                         numbytes = urb->iso_frame_desc[frame].actual_length;
1303                         if (unlikely(numbytes > BAS_MAXFRAME)) {
1304                                 dev_warn(cs->dev,
1305                                          "isochronous read: frame %d: "
1306                                          "numbytes (%d) > BAS_MAXFRAME\n",
1307                                          frame, numbytes);
1308                                 break;
1309                         }
1310                         if (unlikely(numbytes > totleft)) {
1311                                 dev_warn(cs->dev,
1312                                          "isochronous read: frame %d: "
1313                                          "numbytes (%d) > totleft (%d)\n",
1314                                          frame, numbytes, totleft);
1315                                 break;
1316                         }
1317                         offset = urb->iso_frame_desc[frame].offset;
1318                         if (unlikely(offset + numbytes > BAS_INBUFSIZE)) {
1319                                 dev_warn(cs->dev,
1320                                          "isochronous read: frame %d: "
1321                                          "offset (%d) + numbytes (%d) "
1322                                          "> BAS_INBUFSIZE\n",
1323                                          frame, offset, numbytes);
1324                                 break;
1325                         }
1326                         gigaset_isoc_receive(rcvbuf + offset, numbytes, bcs);
1327                         totleft -= numbytes;
1328                 }
1329                 if (unlikely(totleft > 0))
1330                         dev_warn(cs->dev,
1331                                  "isochronous read: %d data bytes missing\n",
1332                                  totleft);
1333
1334         error:
1335                 /* URB processed, resubmit */
1336                 for (frame = 0; frame < BAS_NUMFRAMES; frame++) {
1337                         urb->iso_frame_desc[frame].status = 0;
1338                         urb->iso_frame_desc[frame].actual_length = 0;
1339                 }
1340                 /* urb->dev is clobbered by USB subsystem */
1341                 urb->dev = bcs->cs->hw.bas->udev;
1342                 urb->transfer_flags = URB_ISO_ASAP;
1343                 urb->number_of_packets = BAS_NUMFRAMES;
1344                 rc = usb_submit_urb(urb, GFP_ATOMIC);
1345                 if (unlikely(rc != 0 && rc != -ENODEV)) {
1346                         dev_err(cs->dev,
1347                                 "could not resubmit isochronous read URB: %s\n",
1348                                 get_usb_rcmsg(rc));
1349                         dump_urb(DEBUG_ISO, "resubmit iso read", urb);
1350                         error_hangup(bcs);
1351                 }
1352         }
1353 }
1354
1355 /* Channel Operations */
1356 /* ================== */
1357
1358 /* req_timeout
1359  * timeout routine for control output request
1360  * argument:
1361  *      B channel control structure
1362  */
1363 static void req_timeout(unsigned long data)
1364 {
1365         struct bc_state *bcs = (struct bc_state *) data;
1366         struct bas_cardstate *ucs = bcs->cs->hw.bas;
1367         int pending;
1368         unsigned long flags;
1369
1370         check_pending(ucs);
1371
1372         spin_lock_irqsave(&ucs->lock, flags);
1373         pending = ucs->pending;
1374         ucs->pending = 0;
1375         spin_unlock_irqrestore(&ucs->lock, flags);
1376
1377         switch (pending) {
1378         case 0:                                 /* no pending request */
1379                 gig_dbg(DEBUG_USBREQ, "%s: no request pending", __func__);
1380                 break;
1381
1382         case HD_OPEN_ATCHANNEL:
1383                 dev_err(bcs->cs->dev, "timeout opening AT channel\n");
1384                 error_reset(bcs->cs);
1385                 break;
1386
1387         case HD_OPEN_B2CHANNEL:
1388         case HD_OPEN_B1CHANNEL:
1389                 dev_err(bcs->cs->dev, "timeout opening channel %d\n",
1390                         bcs->channel + 1);
1391                 error_hangup(bcs);
1392                 break;
1393
1394         case HD_CLOSE_ATCHANNEL:
1395                 dev_err(bcs->cs->dev, "timeout closing AT channel\n");
1396                 break;
1397
1398         case HD_CLOSE_B2CHANNEL:
1399         case HD_CLOSE_B1CHANNEL:
1400                 dev_err(bcs->cs->dev, "timeout closing channel %d\n",
1401                         bcs->channel + 1);
1402                 error_reset(bcs->cs);
1403                 break;
1404
1405         default:
1406                 dev_warn(bcs->cs->dev, "request 0x%02x timed out, clearing\n",
1407                          pending);
1408         }
1409 }
1410
1411 /* write_ctrl_callback
1412  * USB completion handler for control pipe output
1413  * called by the USB subsystem in interrupt context
1414  * parameter:
1415  *      urb     USB request block of completed request
1416  *              urb->context = hardware specific controller state structure
1417  */
1418 static void write_ctrl_callback(struct urb *urb)
1419 {
1420         struct bas_cardstate *ucs = urb->context;
1421         int rc;
1422         unsigned long flags;
1423
1424         /* check status */
1425         switch (urb->status) {
1426         case 0:                                 /* normal completion */
1427                 spin_lock_irqsave(&ucs->lock, flags);
1428                 switch (ucs->pending) {
1429                 case HD_DEVICE_INIT_ACK:        /* no reply expected */
1430                         del_timer(&ucs->timer_ctrl);
1431                         ucs->pending = 0;
1432                         break;
1433                 }
1434                 spin_unlock_irqrestore(&ucs->lock, flags);
1435                 return;
1436
1437         case -ENOENT:                   /* cancelled */
1438         case -ECONNRESET:               /* cancelled (async) */
1439         case -EINPROGRESS:              /* pending */
1440         case -ENODEV:                   /* device removed */
1441         case -ESHUTDOWN:                /* device shut down */
1442                 /* ignore silently */
1443                 gig_dbg(DEBUG_USBREQ, "%s: %s",
1444                         __func__, get_usb_statmsg(urb->status));
1445                 break;
1446
1447         default:                                /* any failure */
1448                 if (++ucs->retry_ctrl > BAS_RETRY) {
1449                         dev_err(&ucs->interface->dev,
1450                                 "control request 0x%02x failed: %s\n",
1451                                 ucs->dr_ctrl.bRequest,
1452                                 get_usb_statmsg(urb->status));
1453                         break;          /* give up */
1454                 }
1455                 dev_notice(&ucs->interface->dev,
1456                            "control request 0x%02x: %s, retry %d\n",
1457                            ucs->dr_ctrl.bRequest, get_usb_statmsg(urb->status),
1458                            ucs->retry_ctrl);
1459                 /* urb->dev is clobbered by USB subsystem */
1460                 urb->dev = ucs->udev;
1461                 rc = usb_submit_urb(urb, GFP_ATOMIC);
1462                 if (unlikely(rc)) {
1463                         dev_err(&ucs->interface->dev,
1464                                 "could not resubmit request 0x%02x: %s\n",
1465                                 ucs->dr_ctrl.bRequest, get_usb_rcmsg(rc));
1466                         break;
1467                 }
1468                 /* resubmitted */
1469                 return;
1470         }
1471
1472         /* failed, clear pending request */
1473         spin_lock_irqsave(&ucs->lock, flags);
1474         del_timer(&ucs->timer_ctrl);
1475         ucs->pending = 0;
1476         spin_unlock_irqrestore(&ucs->lock, flags);
1477 }
1478
1479 /* req_submit
1480  * submit a control output request without message buffer to the Gigaset base
1481  * and optionally start a timeout
1482  * parameters:
1483  *      bcs     B channel control structure
1484  *      req     control request code (HD_*)
1485  *      val     control request parameter value (set to 0 if unused)
1486  *      timeout timeout in seconds (0: no timeout)
1487  * return value:
1488  *      0 on success
1489  *      -EBUSY if another request is pending
1490  *      any URB submission error code
1491  */
1492 static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
1493 {
1494         struct bas_cardstate *ucs = bcs->cs->hw.bas;
1495         int ret;
1496         unsigned long flags;
1497
1498         gig_dbg(DEBUG_USBREQ, "-------> 0x%02x (%d)", req, val);
1499
1500         spin_lock_irqsave(&ucs->lock, flags);
1501         if (ucs->pending) {
1502                 spin_unlock_irqrestore(&ucs->lock, flags);
1503                 dev_err(bcs->cs->dev,
1504                         "submission of request 0x%02x failed: "
1505                         "request 0x%02x still pending\n",
1506                         req, ucs->pending);
1507                 return -EBUSY;
1508         }
1509
1510         ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ;
1511         ucs->dr_ctrl.bRequest = req;
1512         ucs->dr_ctrl.wValue = cpu_to_le16(val);
1513         ucs->dr_ctrl.wIndex = 0;
1514         ucs->dr_ctrl.wLength = 0;
1515         usb_fill_control_urb(ucs->urb_ctrl, ucs->udev,
1516                              usb_sndctrlpipe(ucs->udev, 0),
1517                              (unsigned char*) &ucs->dr_ctrl, NULL, 0,
1518                              write_ctrl_callback, ucs);
1519         ucs->retry_ctrl = 0;
1520         ret = usb_submit_urb(ucs->urb_ctrl, GFP_ATOMIC);
1521         if (unlikely(ret)) {
1522                 dev_err(bcs->cs->dev, "could not submit request 0x%02x: %s\n",
1523                         req, get_usb_rcmsg(ret));
1524                 spin_unlock_irqrestore(&ucs->lock, flags);
1525                 return ret;
1526         }
1527         ucs->pending = req;
1528
1529         if (timeout > 0) {
1530                 gig_dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
1531                 ucs->timer_ctrl.expires = jiffies + timeout * HZ / 10;
1532                 ucs->timer_ctrl.data = (unsigned long) bcs;
1533                 ucs->timer_ctrl.function = req_timeout;
1534                 add_timer(&ucs->timer_ctrl);
1535         }
1536
1537         spin_unlock_irqrestore(&ucs->lock, flags);
1538         return 0;
1539 }
1540
1541 /* gigaset_init_bchannel
1542  * called by common.c to connect a B channel
1543  * initialize isochronous I/O and tell the Gigaset base to open the channel
1544  * argument:
1545  *      B channel control structure
1546  * return value:
1547  *      0 on success, error code < 0 on error
1548  */
1549 static int gigaset_init_bchannel(struct bc_state *bcs)
1550 {
1551         int req, ret;
1552         unsigned long flags;
1553
1554         spin_lock_irqsave(&bcs->cs->lock, flags);
1555         if (unlikely(!bcs->cs->connected)) {
1556                 gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
1557                 spin_unlock_irqrestore(&bcs->cs->lock, flags);
1558                 return -ENODEV;
1559         }
1560
1561         if ((ret = starturbs(bcs)) < 0) {
1562                 dev_err(bcs->cs->dev,
1563                         "could not start isochronous I/O for channel B%d: %s\n",
1564                         bcs->channel + 1,
1565                         ret == -EFAULT ? "null URB" : get_usb_rcmsg(ret));
1566                 if (ret != -ENODEV)
1567                         error_hangup(bcs);
1568                 spin_unlock_irqrestore(&bcs->cs->lock, flags);
1569                 return ret;
1570         }
1571
1572         req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
1573         if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) {
1574                 dev_err(bcs->cs->dev, "could not open channel B%d\n",
1575                         bcs->channel + 1);
1576                 stopurbs(bcs->hw.bas);
1577                 if (ret != -ENODEV)
1578                         error_hangup(bcs);
1579         }
1580
1581         spin_unlock_irqrestore(&bcs->cs->lock, flags);
1582         return ret;
1583 }
1584
1585 /* gigaset_close_bchannel
1586  * called by common.c to disconnect a B channel
1587  * tell the Gigaset base to close the channel
1588  * stopping isochronous I/O and LL notification will be done when the
1589  * acknowledgement for the close arrives
1590  * argument:
1591  *      B channel control structure
1592  * return value:
1593  *      0 on success, error code < 0 on error
1594  */
1595 static int gigaset_close_bchannel(struct bc_state *bcs)
1596 {
1597         int req, ret;
1598         unsigned long flags;
1599
1600         spin_lock_irqsave(&bcs->cs->lock, flags);
1601         if (unlikely(!bcs->cs->connected)) {
1602                 spin_unlock_irqrestore(&bcs->cs->lock, flags);
1603                 gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
1604                 return -ENODEV;
1605         }
1606
1607         if (!(atomic_read(&bcs->cs->hw.bas->basstate) &
1608               (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) {
1609                 /* channel not running: just signal common.c */
1610                 spin_unlock_irqrestore(&bcs->cs->lock, flags);
1611                 gigaset_bchannel_down(bcs);
1612                 return 0;
1613         }
1614
1615         /* channel running: tell device to close it */
1616         req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
1617         if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0)
1618                 dev_err(bcs->cs->dev, "closing channel B%d failed\n",
1619                         bcs->channel + 1);
1620
1621         spin_unlock_irqrestore(&bcs->cs->lock, flags);
1622         return ret;
1623 }
1624
1625 /* Device Operations */
1626 /* ================= */
1627
1628 /* complete_cb
1629  * unqueue first command buffer from queue, waking any sleepers
1630  * must be called with cs->cmdlock held
1631  * parameter:
1632  *      cs      controller state structure
1633  */
1634 static void complete_cb(struct cardstate *cs)
1635 {
1636         struct cmdbuf_t *cb = cs->cmdbuf;
1637
1638         /* unqueue completed buffer */
1639         cs->cmdbytes -= cs->curlen;
1640         gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD,
1641                 "write_command: sent %u bytes, %u left",
1642                 cs->curlen, cs->cmdbytes);
1643         if ((cs->cmdbuf = cb->next) != NULL) {
1644                 cs->cmdbuf->prev = NULL;
1645                 cs->curlen = cs->cmdbuf->len;
1646         } else {
1647                 cs->lastcmdbuf = NULL;
1648                 cs->curlen = 0;
1649         }
1650
1651         if (cb->wake_tasklet)
1652                 tasklet_schedule(cb->wake_tasklet);
1653
1654         kfree(cb);
1655 }
1656
1657 /* write_command_callback
1658  * USB completion handler for AT command transmission
1659  * called by the USB subsystem in interrupt context
1660  * parameter:
1661  *      urb     USB request block of completed request
1662  *              urb->context = controller state structure
1663  */
1664 static void write_command_callback(struct urb *urb)
1665 {
1666         struct cardstate *cs = urb->context;
1667         struct bas_cardstate *ucs = cs->hw.bas;
1668         unsigned long flags;
1669
1670         update_basstate(ucs, 0, BS_ATWRPEND);
1671
1672         /* check status */
1673         switch (urb->status) {
1674         case 0:                                 /* normal completion */
1675                 break;
1676         case -ENOENT:                   /* cancelled */
1677         case -ECONNRESET:               /* cancelled (async) */
1678         case -EINPROGRESS:              /* pending */
1679         case -ENODEV:                   /* device removed */
1680         case -ESHUTDOWN:                /* device shut down */
1681                 /* ignore silently */
1682                 gig_dbg(DEBUG_USBREQ, "%s: %s",
1683                         __func__, get_usb_statmsg(urb->status));
1684                 return;
1685         default:                                /* any failure */
1686                 if (++ucs->retry_cmd_out > BAS_RETRY) {
1687                         dev_warn(cs->dev,
1688                                  "command write: %s, "
1689                                  "giving up after %d retries\n",
1690                                  get_usb_statmsg(urb->status),
1691                                  ucs->retry_cmd_out);
1692                         break;
1693                 }
1694                 if (cs->cmdbuf == NULL) {
1695                         dev_warn(cs->dev,
1696                                  "command write: %s, "
1697                                  "cannot retry - cmdbuf gone\n",
1698                                  get_usb_statmsg(urb->status));
1699                         break;
1700                 }
1701                 dev_notice(cs->dev, "command write: %s, retry %d\n",
1702                            get_usb_statmsg(urb->status), ucs->retry_cmd_out);
1703                 if (atwrite_submit(cs, cs->cmdbuf->buf, cs->cmdbuf->len) >= 0)
1704                         /* resubmitted - bypass regular exit block */
1705                         return;
1706                 /* command send failed, assume base still waiting */
1707                 update_basstate(ucs, BS_ATREADY, 0);
1708         }
1709
1710         spin_lock_irqsave(&cs->cmdlock, flags);
1711         if (cs->cmdbuf != NULL)
1712                 complete_cb(cs);
1713         spin_unlock_irqrestore(&cs->cmdlock, flags);
1714 }
1715
1716 /* atrdy_timeout
1717  * timeout routine for AT command transmission
1718  * argument:
1719  *      controller state structure
1720  */
1721 static void atrdy_timeout(unsigned long data)
1722 {
1723         struct cardstate *cs = (struct cardstate *) data;
1724         struct bas_cardstate *ucs = cs->hw.bas;
1725
1726         dev_warn(cs->dev, "timeout waiting for HD_READY_SEND_ATDATA\n");
1727
1728         /* fake the missing signal - what else can I do? */
1729         update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
1730         start_cbsend(cs);
1731 }
1732
1733 /* atwrite_submit
1734  * submit an HD_WRITE_ATMESSAGE command URB
1735  * parameters:
1736  *      cs      controller state structure
1737  *      buf     buffer containing command to send
1738  *      len     length of command to send
1739  * return value:
1740  *      0 on success
1741  *      -EBUSY if another request is pending
1742  *      any URB submission error code
1743  */
1744 static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
1745 {
1746         struct bas_cardstate *ucs = cs->hw.bas;
1747         int rc;
1748
1749         gig_dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len);
1750
1751         if (update_basstate(ucs, BS_ATWRPEND, 0) & BS_ATWRPEND) {
1752                 dev_err(cs->dev,
1753                         "could not submit HD_WRITE_ATMESSAGE: URB busy\n");
1754                 return -EBUSY;
1755         }
1756
1757         ucs->dr_cmd_out.bRequestType = OUT_VENDOR_REQ;
1758         ucs->dr_cmd_out.bRequest = HD_WRITE_ATMESSAGE;
1759         ucs->dr_cmd_out.wValue = 0;
1760         ucs->dr_cmd_out.wIndex = 0;
1761         ucs->dr_cmd_out.wLength = cpu_to_le16(len);
1762         usb_fill_control_urb(ucs->urb_cmd_out, ucs->udev,
1763                              usb_sndctrlpipe(ucs->udev, 0),
1764                              (unsigned char*) &ucs->dr_cmd_out, buf, len,
1765                              write_command_callback, cs);
1766         rc = usb_submit_urb(ucs->urb_cmd_out, GFP_ATOMIC);
1767         if (unlikely(rc)) {
1768                 update_basstate(ucs, 0, BS_ATWRPEND);
1769                 dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: %s\n",
1770                         get_usb_rcmsg(rc));
1771                 return rc;
1772         }
1773
1774         /* submitted successfully, start timeout if necessary */
1775         if (!(update_basstate(ucs, BS_ATTIMER, BS_ATREADY) & BS_ATTIMER)) {
1776                 gig_dbg(DEBUG_OUTPUT, "setting ATREADY timeout of %d/10 secs",
1777                         ATRDY_TIMEOUT);
1778                 ucs->timer_atrdy.expires = jiffies + ATRDY_TIMEOUT * HZ / 10;
1779                 ucs->timer_atrdy.data = (unsigned long) cs;
1780                 ucs->timer_atrdy.function = atrdy_timeout;
1781                 add_timer(&ucs->timer_atrdy);
1782         }
1783         return 0;
1784 }
1785
1786 /* start_cbsend
1787  * start transmission of AT command queue if necessary
1788  * parameter:
1789  *      cs              controller state structure
1790  * return value:
1791  *      0 on success
1792  *      error code < 0 on error
1793  */
1794 static int start_cbsend(struct cardstate *cs)
1795 {
1796         struct cmdbuf_t *cb;
1797         struct bas_cardstate *ucs = cs->hw.bas;
1798         unsigned long flags;
1799         int rc;
1800         int retval = 0;
1801
1802         /* check if AT channel is open */
1803         if (!(atomic_read(&ucs->basstate) & BS_ATOPEN)) {
1804                 gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "AT channel not open");
1805                 rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT);
1806                 if (rc < 0) {
1807                         /* flush command queue */
1808                         spin_lock_irqsave(&cs->cmdlock, flags);
1809                         while (cs->cmdbuf != NULL)
1810                                 complete_cb(cs);
1811                         spin_unlock_irqrestore(&cs->cmdlock, flags);
1812                 }
1813                 return rc;
1814         }
1815
1816         /* try to send first command in queue */
1817         spin_lock_irqsave(&cs->cmdlock, flags);
1818
1819         while ((cb = cs->cmdbuf) != NULL &&
1820                atomic_read(&ucs->basstate) & BS_ATREADY) {
1821                 ucs->retry_cmd_out = 0;
1822                 rc = atwrite_submit(cs, cb->buf, cb->len);
1823                 if (unlikely(rc)) {
1824                         retval = rc;
1825                         complete_cb(cs);
1826                 }
1827         }
1828
1829         spin_unlock_irqrestore(&cs->cmdlock, flags);
1830         return retval;
1831 }
1832
1833 /* gigaset_write_cmd
1834  * This function is called by the device independent part of the driver
1835  * to transmit an AT command string to the Gigaset device.
1836  * It encapsulates the device specific method for transmission over the
1837  * direct USB connection to the base.
1838  * The command string is added to the queue of commands to send, and
1839  * USB transmission is started if necessary.
1840  * parameters:
1841  *      cs              controller state structure
1842  *      buf             command string to send
1843  *      len             number of bytes to send (max. IF_WRITEBUF)
1844  *      wake_tasklet    tasklet to run when transmission is completed
1845  *                      (NULL if none)
1846  * return value:
1847  *      number of bytes queued on success
1848  *      error code < 0 on error
1849  */
1850 static int gigaset_write_cmd(struct cardstate *cs,
1851                              const unsigned char *buf, int len,
1852                              struct tasklet_struct *wake_tasklet)
1853 {
1854         struct cmdbuf_t *cb;
1855         unsigned long flags;
1856         int rc;
1857
1858         gigaset_dbg_buffer(atomic_read(&cs->mstate) != MS_LOCKED ?
1859                              DEBUG_TRANSCMD : DEBUG_LOCKCMD,
1860                            "CMD Transmit", len, buf);
1861
1862         if (len <= 0) {
1863                 /* nothing to do */
1864                 rc = 0;
1865                 goto notqueued;
1866         }
1867
1868         if (len > IF_WRITEBUF)
1869                 len = IF_WRITEBUF;
1870         if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
1871                 dev_err(cs->dev, "%s: out of memory\n", __func__);
1872                 rc = -ENOMEM;
1873                 goto notqueued;
1874         }
1875
1876         memcpy(cb->buf, buf, len);
1877         cb->len = len;
1878         cb->offset = 0;
1879         cb->next = NULL;
1880         cb->wake_tasklet = wake_tasklet;
1881
1882         spin_lock_irqsave(&cs->cmdlock, flags);
1883         cb->prev = cs->lastcmdbuf;
1884         if (cs->lastcmdbuf)
1885                 cs->lastcmdbuf->next = cb;
1886         else {
1887                 cs->cmdbuf = cb;
1888                 cs->curlen = len;
1889         }
1890         cs->cmdbytes += len;
1891         cs->lastcmdbuf = cb;
1892         spin_unlock_irqrestore(&cs->cmdlock, flags);
1893
1894         spin_lock_irqsave(&cs->lock, flags);
1895         if (unlikely(!cs->connected)) {
1896                 spin_unlock_irqrestore(&cs->lock, flags);
1897                 gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
1898                 /* flush command queue */
1899                 spin_lock_irqsave(&cs->cmdlock, flags);
1900                 while (cs->cmdbuf != NULL)
1901                         complete_cb(cs);
1902                 spin_unlock_irqrestore(&cs->cmdlock, flags);
1903                 return -ENODEV;
1904         }
1905         rc = start_cbsend(cs);
1906         spin_unlock_irqrestore(&cs->lock, flags);
1907         return rc < 0 ? rc : len;
1908
1909 notqueued:                      /* request handled without queuing */
1910         if (wake_tasklet)
1911                 tasklet_schedule(wake_tasklet);
1912         return rc;
1913 }
1914
1915 /* gigaset_write_room
1916  * tty_driver.write_room interface routine
1917  * return number of characters the driver will accept to be written via
1918  * gigaset_write_cmd
1919  * parameter:
1920  *      controller state structure
1921  * return value:
1922  *      number of characters
1923  */
1924 static int gigaset_write_room(struct cardstate *cs)
1925 {
1926         return IF_WRITEBUF;
1927 }
1928
1929 /* gigaset_chars_in_buffer
1930  * tty_driver.chars_in_buffer interface routine
1931  * return number of characters waiting to be sent
1932  * parameter:
1933  *      controller state structure
1934  * return value:
1935  *      number of characters
1936  */
1937 static int gigaset_chars_in_buffer(struct cardstate *cs)
1938 {
1939         unsigned long flags;
1940         unsigned bytes;
1941
1942         spin_lock_irqsave(&cs->cmdlock, flags);
1943         bytes = cs->cmdbytes;
1944         spin_unlock_irqrestore(&cs->cmdlock, flags);
1945
1946         return bytes;
1947 }
1948
1949 /* gigaset_brkchars
1950  * implementation of ioctl(GIGASET_BRKCHARS)
1951  * parameter:
1952  *      controller state structure
1953  * return value:
1954  *      -EINVAL (unimplemented function)
1955  */
1956 static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
1957 {
1958         return -EINVAL;
1959 }
1960
1961
1962 /* Device Initialization/Shutdown */
1963 /* ============================== */
1964
1965 /* Free hardware dependent part of the B channel structure
1966  * parameter:
1967  *      bcs     B channel structure
1968  * return value:
1969  *      !=0 on success
1970  */
1971 static int gigaset_freebcshw(struct bc_state *bcs)
1972 {
1973         struct bas_bc_state *ubc = bcs->hw.bas;
1974         int i;
1975
1976         if (!ubc)
1977                 return 0;
1978
1979         /* kill URBs and tasklets before freeing - better safe than sorry */
1980         atomic_set(&ubc->running, 0);
1981         gig_dbg(DEBUG_INIT, "%s: killing iso URBs", __func__);
1982         for (i = 0; i < BAS_OUTURBS; ++i) {
1983                 usb_kill_urb(ubc->isoouturbs[i].urb);
1984                 usb_free_urb(ubc->isoouturbs[i].urb);
1985         }
1986         for (i = 0; i < BAS_INURBS; ++i) {
1987                 usb_kill_urb(ubc->isoinurbs[i]);
1988                 usb_free_urb(ubc->isoinurbs[i]);
1989         }
1990         tasklet_kill(&ubc->sent_tasklet);
1991         tasklet_kill(&ubc->rcvd_tasklet);
1992         kfree(ubc->isooutbuf);
1993         kfree(ubc);
1994         bcs->hw.bas = NULL;
1995         return 1;
1996 }
1997
1998 /* Initialize hardware dependent part of the B channel structure
1999  * parameter:
2000  *      bcs     B channel structure
2001  * return value:
2002  *      !=0 on success
2003  */
2004 static int gigaset_initbcshw(struct bc_state *bcs)
2005 {
2006         int i;
2007         struct bas_bc_state *ubc;
2008
2009         bcs->hw.bas = ubc = kmalloc(sizeof(struct bas_bc_state), GFP_KERNEL);
2010         if (!ubc) {
2011                 err("could not allocate bas_bc_state");
2012                 return 0;
2013         }
2014
2015         atomic_set(&ubc->running, 0);
2016         atomic_set(&ubc->corrbytes, 0);
2017         spin_lock_init(&ubc->isooutlock);
2018         for (i = 0; i < BAS_OUTURBS; ++i) {
2019                 ubc->isoouturbs[i].urb = NULL;
2020                 ubc->isoouturbs[i].bcs = bcs;
2021         }
2022         ubc->isooutdone = ubc->isooutfree = ubc->isooutovfl = NULL;
2023         ubc->numsub = 0;
2024         if (!(ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL))) {
2025                 err("could not allocate isochronous output buffer");
2026                 kfree(ubc);
2027                 bcs->hw.bas = NULL;
2028                 return 0;
2029         }
2030         tasklet_init(&ubc->sent_tasklet,
2031                      &write_iso_tasklet, (unsigned long) bcs);
2032
2033         spin_lock_init(&ubc->isoinlock);
2034         for (i = 0; i < BAS_INURBS; ++i)
2035                 ubc->isoinurbs[i] = NULL;
2036         ubc->isoindone = NULL;
2037         ubc->loststatus = -EINPROGRESS;
2038         ubc->isoinlost = 0;
2039         ubc->seqlen = 0;
2040         ubc->inbyte = 0;
2041         ubc->inbits = 0;
2042         ubc->goodbytes = 0;
2043         ubc->alignerrs = 0;
2044         ubc->fcserrs = 0;
2045         ubc->frameerrs = 0;
2046         ubc->giants = 0;
2047         ubc->runts = 0;
2048         ubc->aborts = 0;
2049         ubc->shared0s = 0;
2050         ubc->stolen0s = 0;
2051         tasklet_init(&ubc->rcvd_tasklet,
2052                      &read_iso_tasklet, (unsigned long) bcs);
2053         return 1;
2054 }
2055
2056 static void gigaset_reinitbcshw(struct bc_state *bcs)
2057 {
2058         struct bas_bc_state *ubc = bcs->hw.bas;
2059
2060         atomic_set(&bcs->hw.bas->running, 0);
2061         atomic_set(&bcs->hw.bas->corrbytes, 0);
2062         bcs->hw.bas->numsub = 0;
2063         spin_lock_init(&ubc->isooutlock);
2064         spin_lock_init(&ubc->isoinlock);
2065         ubc->loststatus = -EINPROGRESS;
2066 }
2067
2068 static void gigaset_freecshw(struct cardstate *cs)
2069 {
2070         /* timers, URBs and rcvbuf are disposed of in disconnect */
2071         kfree(cs->hw.bas);
2072         cs->hw.bas = NULL;
2073 }
2074
2075 static int gigaset_initcshw(struct cardstate *cs)
2076 {
2077         struct bas_cardstate *ucs;
2078
2079         cs->hw.bas = ucs = kmalloc(sizeof *ucs, GFP_KERNEL);
2080         if (!ucs)
2081                 return 0;
2082
2083         ucs->urb_cmd_in = NULL;
2084         ucs->urb_cmd_out = NULL;
2085         ucs->rcvbuf = NULL;
2086         ucs->rcvbuf_size = 0;
2087
2088         spin_lock_init(&ucs->lock);
2089         ucs->pending = 0;
2090
2091         atomic_set(&ucs->basstate, 0);
2092         init_timer(&ucs->timer_ctrl);
2093         init_timer(&ucs->timer_atrdy);
2094         init_timer(&ucs->timer_cmd_in);
2095
2096         return 1;
2097 }
2098
2099 /* freeurbs
2100  * unlink and deallocate all URBs unconditionally
2101  * caller must make sure that no commands are still in progress
2102  * parameter:
2103  *      cs      controller state structure
2104  */
2105 static void freeurbs(struct cardstate *cs)
2106 {
2107         struct bas_cardstate *ucs = cs->hw.bas;
2108         struct bas_bc_state *ubc;
2109         int i, j;
2110
2111         gig_dbg(DEBUG_INIT, "%s: killing URBs", __func__);
2112         for (j = 0; j < 2; ++j) {
2113                 ubc = cs->bcs[j].hw.bas;
2114                 for (i = 0; i < BAS_OUTURBS; ++i) {
2115                         usb_kill_urb(ubc->isoouturbs[i].urb);
2116                         usb_free_urb(ubc->isoouturbs[i].urb);
2117                         ubc->isoouturbs[i].urb = NULL;
2118                 }
2119                 for (i = 0; i < BAS_INURBS; ++i) {
2120                         usb_kill_urb(ubc->isoinurbs[i]);
2121                         usb_free_urb(ubc->isoinurbs[i]);
2122                         ubc->isoinurbs[i] = NULL;
2123                 }
2124         }
2125         usb_kill_urb(ucs->urb_int_in);
2126         usb_free_urb(ucs->urb_int_in);
2127         ucs->urb_int_in = NULL;
2128         usb_kill_urb(ucs->urb_cmd_out);
2129         usb_free_urb(ucs->urb_cmd_out);
2130         ucs->urb_cmd_out = NULL;
2131         usb_kill_urb(ucs->urb_cmd_in);
2132         usb_free_urb(ucs->urb_cmd_in);
2133         ucs->urb_cmd_in = NULL;
2134         usb_kill_urb(ucs->urb_ctrl);
2135         usb_free_urb(ucs->urb_ctrl);
2136         ucs->urb_ctrl = NULL;
2137 }
2138
2139 /* gigaset_probe
2140  * This function is called when a new USB device is connected.
2141  * It checks whether the new device is handled by this driver.
2142  */
2143 static int gigaset_probe(struct usb_interface *interface,
2144                          const struct usb_device_id *id)
2145 {
2146         struct usb_host_interface *hostif;
2147         struct usb_device *udev = interface_to_usbdev(interface);
2148         struct cardstate *cs = NULL;
2149         struct bas_cardstate *ucs = NULL;
2150         struct bas_bc_state *ubc;
2151         struct usb_endpoint_descriptor *endpoint;
2152         int i, j;
2153         int rc;
2154
2155         gig_dbg(DEBUG_ANY,
2156                 "%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
2157                 __func__, le16_to_cpu(udev->descriptor.idVendor),
2158                 le16_to_cpu(udev->descriptor.idProduct));
2159
2160         /* set required alternate setting */
2161         hostif = interface->cur_altsetting;
2162         if (hostif->desc.bAlternateSetting != 3) {
2163                 gig_dbg(DEBUG_ANY,
2164                         "%s: wrong alternate setting %d - trying to switch",
2165                         __func__, hostif->desc.bAlternateSetting);
2166                 if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3) < 0) {
2167                         dev_warn(&udev->dev, "usb_set_interface failed, "
2168                                  "device %d interface %d altsetting %d\n",
2169                                  udev->devnum, hostif->desc.bInterfaceNumber,
2170                                  hostif->desc.bAlternateSetting);
2171                         return -ENODEV;
2172                 }
2173                 hostif = interface->cur_altsetting;
2174         }
2175
2176         /* Reject application specific interfaces
2177          */
2178         if (hostif->desc.bInterfaceClass != 255) {
2179                 dev_warn(&udev->dev, "%s: bInterfaceClass == %d\n",
2180                          __func__, hostif->desc.bInterfaceClass);
2181                 return -ENODEV;
2182         }
2183
2184         dev_info(&udev->dev,
2185                  "%s: Device matched (Vendor: 0x%x, Product: 0x%x)\n",
2186                  __func__, le16_to_cpu(udev->descriptor.idVendor),
2187                  le16_to_cpu(udev->descriptor.idProduct));
2188
2189         cs = gigaset_getunassignedcs(driver);
2190         if (!cs) {
2191                 dev_err(&udev->dev, "no free cardstate\n");
2192                 return -ENODEV;
2193         }
2194         ucs = cs->hw.bas;
2195
2196         /* save off device structure ptrs for later use */
2197         usb_get_dev(udev);
2198         ucs->udev = udev;
2199         ucs->interface = interface;
2200         cs->dev = &interface->dev;
2201
2202         /* allocate URBs:
2203          * - one for the interrupt pipe
2204          * - three for the different uses of the default control pipe
2205          * - three for each isochronous pipe
2206          */
2207         if (!(ucs->urb_int_in = usb_alloc_urb(0, GFP_KERNEL)) ||
2208             !(ucs->urb_cmd_in = usb_alloc_urb(0, GFP_KERNEL)) ||
2209             !(ucs->urb_cmd_out = usb_alloc_urb(0, GFP_KERNEL)) ||
2210             !(ucs->urb_ctrl = usb_alloc_urb(0, GFP_KERNEL)))
2211                 goto allocerr;
2212
2213         for (j = 0; j < 2; ++j) {
2214                 ubc = cs->bcs[j].hw.bas;
2215                 for (i = 0; i < BAS_OUTURBS; ++i)
2216                         if (!(ubc->isoouturbs[i].urb =
2217                               usb_alloc_urb(BAS_NUMFRAMES, GFP_KERNEL)))
2218                                 goto allocerr;
2219                 for (i = 0; i < BAS_INURBS; ++i)
2220                         if (!(ubc->isoinurbs[i] =
2221                               usb_alloc_urb(BAS_NUMFRAMES, GFP_KERNEL)))
2222                                 goto allocerr;
2223         }
2224
2225         ucs->rcvbuf = NULL;
2226         ucs->rcvbuf_size = 0;
2227
2228         /* Fill the interrupt urb and send it to the core */
2229         endpoint = &hostif->endpoint[0].desc;
2230         usb_fill_int_urb(ucs->urb_int_in, udev,
2231                          usb_rcvintpipe(udev,
2232                                         (endpoint->bEndpointAddress) & 0x0f),
2233                          ucs->int_in_buf, 3, read_int_callback, cs,
2234                          endpoint->bInterval);
2235         if ((rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL)) != 0) {
2236                 dev_err(cs->dev, "could not submit interrupt URB: %s\n",
2237                         get_usb_rcmsg(rc));
2238                 goto error;
2239         }
2240
2241         /* tell the device that the driver is ready */
2242         if ((rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
2243                 goto error;
2244
2245         /* tell common part that the device is ready */
2246         if (startmode == SM_LOCKED)
2247                 atomic_set(&cs->mstate, MS_LOCKED);
2248
2249         /* save address of controller structure */
2250         usb_set_intfdata(interface, cs);
2251
2252         if (!gigaset_start(cs))
2253                 goto error;
2254
2255         return 0;
2256
2257 allocerr:
2258         dev_err(cs->dev, "could not allocate URBs\n");
2259 error:
2260         freeurbs(cs);
2261         usb_set_intfdata(interface, NULL);
2262         gigaset_unassign(cs);
2263         return -ENODEV;
2264 }
2265
2266 /* gigaset_disconnect
2267  * This function is called when the Gigaset base is unplugged.
2268  */
2269 static void gigaset_disconnect(struct usb_interface *interface)
2270 {
2271         struct cardstate *cs;
2272         struct bas_cardstate *ucs;
2273         int j;
2274
2275         cs = usb_get_intfdata(interface);
2276
2277         ucs = cs->hw.bas;
2278
2279         dev_info(cs->dev, "disconnecting Gigaset base\n");
2280
2281         /* mark base as not ready, all channels disconnected */
2282         atomic_set(&ucs->basstate, 0);
2283
2284         /* tell LL all channels are down */
2285         //FIXME shouldn't gigaset_stop() do this?
2286         for (j = 0; j < 2; ++j)
2287                 gigaset_bchannel_down(cs->bcs + j);
2288
2289         /* stop driver (common part) */
2290         gigaset_stop(cs);
2291
2292         /* stop timers and URBs, free ressources */
2293         del_timer_sync(&ucs->timer_ctrl);
2294         del_timer_sync(&ucs->timer_atrdy);
2295         del_timer_sync(&ucs->timer_cmd_in);
2296         freeurbs(cs);
2297         usb_set_intfdata(interface, NULL);
2298         kfree(ucs->rcvbuf);
2299         ucs->rcvbuf = NULL;
2300         ucs->rcvbuf_size = 0;
2301         usb_put_dev(ucs->udev);
2302         ucs->interface = NULL;
2303         ucs->udev = NULL;
2304         cs->dev = NULL;
2305         gigaset_unassign(cs);
2306 }
2307
2308 static struct gigaset_ops gigops = {
2309         gigaset_write_cmd,
2310         gigaset_write_room,
2311         gigaset_chars_in_buffer,
2312         gigaset_brkchars,
2313         gigaset_init_bchannel,
2314         gigaset_close_bchannel,
2315         gigaset_initbcshw,
2316         gigaset_freebcshw,
2317         gigaset_reinitbcshw,
2318         gigaset_initcshw,
2319         gigaset_freecshw,
2320         gigaset_set_modem_ctrl,
2321         gigaset_baud_rate,
2322         gigaset_set_line_ctrl,
2323         gigaset_isoc_send_skb,
2324         gigaset_isoc_input,
2325 };
2326
2327 /* bas_gigaset_init
2328  * This function is called after the kernel module is loaded.
2329  */
2330 static int __init bas_gigaset_init(void)
2331 {
2332         int result;
2333
2334         /* allocate memory for our driver state and intialize it */
2335         if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
2336                                        GIGASET_MODULENAME, GIGASET_DEVNAME,
2337                                        &gigops, THIS_MODULE)) == NULL)
2338                 goto error;
2339
2340         /* allocate memory for our device state and intialize it */
2341         cardstate = gigaset_initcs(driver, 2, 0, 0, cidmode,
2342                                    GIGASET_MODULENAME);
2343         if (!cardstate)
2344                 goto error;
2345
2346         /* register this driver with the USB subsystem */
2347         result = usb_register(&gigaset_usb_driver);
2348         if (result < 0) {
2349                 err("usb_register failed (error %d)", -result);
2350                 goto error;
2351         }
2352
2353         info(DRIVER_AUTHOR);
2354         info(DRIVER_DESC);
2355         return 0;
2356
2357 error:  if (cardstate)
2358                 gigaset_freecs(cardstate);
2359         cardstate = NULL;
2360         if (driver)
2361                 gigaset_freedriver(driver);
2362         driver = NULL;
2363         return -1;
2364 }
2365
2366 /* bas_gigaset_exit
2367  * This function is called before the kernel module is unloaded.
2368  */
2369 static void __exit bas_gigaset_exit(void)
2370 {
2371         struct bas_cardstate *ucs = cardstate->hw.bas;
2372
2373         gigaset_blockdriver(driver); /* => probe will fail
2374                                       * => no gigaset_start any more
2375                                       */
2376
2377         gigaset_shutdown(cardstate);
2378         /* from now on, no isdn callback should be possible */
2379
2380         /* close all still open channels */
2381         if (atomic_read(&ucs->basstate) & BS_B1OPEN) {
2382                 gig_dbg(DEBUG_INIT, "closing B1 channel");
2383                 usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
2384                                 HD_CLOSE_B1CHANNEL, OUT_VENDOR_REQ, 0, 0,
2385                                 NULL, 0, BAS_TIMEOUT);
2386         }
2387         if (atomic_read(&ucs->basstate) & BS_B2OPEN) {
2388                 gig_dbg(DEBUG_INIT, "closing B2 channel");
2389                 usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
2390                                 HD_CLOSE_B2CHANNEL, OUT_VENDOR_REQ, 0, 0,
2391                                 NULL, 0, BAS_TIMEOUT);
2392         }
2393         if (atomic_read(&ucs->basstate) & BS_ATOPEN) {
2394                 gig_dbg(DEBUG_INIT, "closing AT channel");
2395                 usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
2396                                 HD_CLOSE_ATCHANNEL, OUT_VENDOR_REQ, 0, 0,
2397                                 NULL, 0, BAS_TIMEOUT);
2398         }
2399         atomic_set(&ucs->basstate, 0);
2400
2401         /* deregister this driver with the USB subsystem */
2402         usb_deregister(&gigaset_usb_driver);
2403         /* this will call the disconnect-callback */
2404         /* from now on, no disconnect/probe callback should be running */
2405
2406         gigaset_freecs(cardstate);
2407         cardstate = NULL;
2408         gigaset_freedriver(driver);
2409         driver = NULL;
2410 }
2411
2412
2413 module_init(bas_gigaset_init);
2414 module_exit(bas_gigaset_exit);
2415
2416 MODULE_AUTHOR(DRIVER_AUTHOR);
2417 MODULE_DESCRIPTION(DRIVER_DESC);
2418 MODULE_LICENSE("GPL");