Staging: comedi: Remove boardtype typedef in addi-data
[linux-2.6] / drivers / serial / sunsab.c
1 /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
2  *
3  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
4  * Copyright (C) 2002, 2006  David S. Miller (davem@davemloft.net)
5  *
6  * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
7  *   Maxim Krasnyanskiy <maxk@qualcomm.com>
8  *
9  * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
10  * rates to be programmed into the UART.  Also eliminated a lot of
11  * duplicated code in the console setup.
12  *   Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
13  *
14  * Ported to new 2.5.x UART layer.
15  *   David S. Miller <davem@davemloft.net>
16  */
17
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/errno.h>
21 #include <linux/tty.h>
22 #include <linux/tty_flip.h>
23 #include <linux/major.h>
24 #include <linux/string.h>
25 #include <linux/ptrace.h>
26 #include <linux/ioport.h>
27 #include <linux/circ_buf.h>
28 #include <linux/serial.h>
29 #include <linux/sysrq.h>
30 #include <linux/console.h>
31 #include <linux/spinlock.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/init.h>
35 #include <linux/of_device.h>
36
37 #include <asm/io.h>
38 #include <asm/irq.h>
39 #include <asm/prom.h>
40
41 #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
42 #define SUPPORT_SYSRQ
43 #endif
44
45 #include <linux/serial_core.h>
46
47 #include "suncore.h"
48 #include "sunsab.h"
49
50 struct uart_sunsab_port {
51         struct uart_port                port;           /* Generic UART port    */
52         union sab82532_async_regs       __iomem *regs;  /* Chip registers       */
53         unsigned long                   irqflags;       /* IRQ state flags      */
54         int                             dsr;            /* Current DSR state    */
55         unsigned int                    cec_timeout;    /* Chip poll timeout... */
56         unsigned int                    tec_timeout;    /* likewise             */
57         unsigned char                   interrupt_mask0;/* ISR0 masking         */
58         unsigned char                   interrupt_mask1;/* ISR1 masking         */
59         unsigned char                   pvr_dtr_bit;    /* Which PVR bit is DTR */
60         unsigned char                   pvr_dsr_bit;    /* Which PVR bit is DSR */
61         unsigned int                    gis_shift;
62         int                             type;           /* SAB82532 version     */
63
64         /* Setting configuration bits while the transmitter is active
65          * can cause garbage characters to get emitted by the chip.
66          * Therefore, we cache such writes here and do the real register
67          * write the next time the transmitter becomes idle.
68          */
69         unsigned int                    cached_ebrg;
70         unsigned char                   cached_mode;
71         unsigned char                   cached_pvr;
72         unsigned char                   cached_dafo;
73 };
74
75 /*
76  * This assumes you have a 29.4912 MHz clock for your UART.
77  */
78 #define SAB_BASE_BAUD ( 29491200 / 16 )
79
80 static char *sab82532_version[16] = {
81         "V1.0", "V2.0", "V3.2", "V(0x03)",
82         "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
83         "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
84         "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
85 };
86
87 #define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
88 #define SAB82532_MAX_CEC_TIMEOUT  50000 /* 2.5 TX CLKs (at 50 baud) */
89
90 #define SAB82532_RECV_FIFO_SIZE 32      /* Standard async fifo sizes */
91 #define SAB82532_XMIT_FIFO_SIZE 32
92
93 static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
94 {
95         int timeout = up->tec_timeout;
96
97         while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
98                 udelay(1);
99 }
100
101 static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
102 {
103         int timeout = up->cec_timeout;
104
105         while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
106                 udelay(1);
107 }
108
109 static struct tty_struct *
110 receive_chars(struct uart_sunsab_port *up,
111               union sab82532_irq_status *stat)
112 {
113         struct tty_struct *tty = NULL;
114         unsigned char buf[32];
115         int saw_console_brk = 0;
116         int free_fifo = 0;
117         int count = 0;
118         int i;
119
120         if (up->port.info != NULL)              /* Unopened serial console */
121                 tty = up->port.info->port.tty;
122
123         /* Read number of BYTES (Character + Status) available. */
124         if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
125                 count = SAB82532_RECV_FIFO_SIZE;
126                 free_fifo++;
127         }
128
129         if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
130                 count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
131                 free_fifo++;
132         }
133
134         /* Issue a FIFO read command in case we where idle. */
135         if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
136                 sunsab_cec_wait(up);
137                 writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
138                 return tty;
139         }
140
141         if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
142                 free_fifo++;
143
144         /* Read the FIFO. */
145         for (i = 0; i < count; i++)
146                 buf[i] = readb(&up->regs->r.rfifo[i]);
147
148         /* Issue Receive Message Complete command. */
149         if (free_fifo) {
150                 sunsab_cec_wait(up);
151                 writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
152         }
153
154         /* Count may be zero for BRK, so we check for it here */
155         if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
156             (up->port.line == up->port.cons->index))
157                 saw_console_brk = 1;
158
159         for (i = 0; i < count; i++) {
160                 unsigned char ch = buf[i], flag;
161
162                 if (tty == NULL) {
163                         uart_handle_sysrq_char(&up->port, ch);
164                         continue;
165                 }
166
167                 flag = TTY_NORMAL;
168                 up->port.icount.rx++;
169
170                 if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
171                                                 SAB82532_ISR0_FERR |
172                                                 SAB82532_ISR0_RFO)) ||
173                     unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
174                         /*
175                          * For statistics only
176                          */
177                         if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
178                                 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
179                                                      SAB82532_ISR0_FERR);
180                                 up->port.icount.brk++;
181                                 /*
182                                  * We do the SysRQ and SAK checking
183                                  * here because otherwise the break
184                                  * may get masked by ignore_status_mask
185                                  * or read_status_mask.
186                                  */
187                                 if (uart_handle_break(&up->port))
188                                         continue;
189                         } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
190                                 up->port.icount.parity++;
191                         else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
192                                 up->port.icount.frame++;
193                         if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
194                                 up->port.icount.overrun++;
195
196                         /*
197                          * Mask off conditions which should be ingored.
198                          */
199                         stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
200                         stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
201
202                         if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
203                                 flag = TTY_BREAK;
204                         } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
205                                 flag = TTY_PARITY;
206                         else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
207                                 flag = TTY_FRAME;
208                 }
209
210                 if (uart_handle_sysrq_char(&up->port, ch))
211                         continue;
212
213                 if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
214                     (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0)
215                         tty_insert_flip_char(tty, ch, flag);
216                 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
217                         tty_insert_flip_char(tty, 0, TTY_OVERRUN);
218         }
219
220         if (saw_console_brk)
221                 sun_do_break();
222
223         return tty;
224 }
225
226 static void sunsab_stop_tx(struct uart_port *);
227 static void sunsab_tx_idle(struct uart_sunsab_port *);
228
229 static void transmit_chars(struct uart_sunsab_port *up,
230                            union sab82532_irq_status *stat)
231 {
232         struct circ_buf *xmit = &up->port.info->xmit;
233         int i;
234
235         if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
236                 up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
237                 writeb(up->interrupt_mask1, &up->regs->w.imr1);
238                 set_bit(SAB82532_ALLS, &up->irqflags);
239         }
240
241 #if 0 /* bde@nwlink.com says this check causes problems */
242         if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
243                 return;
244 #endif
245
246         if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
247                 return;
248
249         set_bit(SAB82532_XPR, &up->irqflags);
250         sunsab_tx_idle(up);
251
252         if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
253                 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
254                 writeb(up->interrupt_mask1, &up->regs->w.imr1);
255                 return;
256         }
257
258         up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
259         writeb(up->interrupt_mask1, &up->regs->w.imr1);
260         clear_bit(SAB82532_ALLS, &up->irqflags);
261
262         /* Stuff 32 bytes into Transmit FIFO. */
263         clear_bit(SAB82532_XPR, &up->irqflags);
264         for (i = 0; i < up->port.fifosize; i++) {
265                 writeb(xmit->buf[xmit->tail],
266                        &up->regs->w.xfifo[i]);
267                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
268                 up->port.icount.tx++;
269                 if (uart_circ_empty(xmit))
270                         break;
271         }
272
273         /* Issue a Transmit Frame command. */
274         sunsab_cec_wait(up);
275         writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
276
277         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
278                 uart_write_wakeup(&up->port);
279
280         if (uart_circ_empty(xmit))
281                 sunsab_stop_tx(&up->port);
282 }
283
284 static void check_status(struct uart_sunsab_port *up,
285                          union sab82532_irq_status *stat)
286 {
287         if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
288                 uart_handle_dcd_change(&up->port,
289                                        !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
290
291         if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
292                 uart_handle_cts_change(&up->port,
293                                        (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
294
295         if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
296                 up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
297                 up->port.icount.dsr++;
298         }
299
300         wake_up_interruptible(&up->port.info->delta_msr_wait);
301 }
302
303 static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
304 {
305         struct uart_sunsab_port *up = dev_id;
306         struct tty_struct *tty;
307         union sab82532_irq_status status;
308         unsigned long flags;
309         unsigned char gis;
310
311         spin_lock_irqsave(&up->port.lock, flags);
312
313         status.stat = 0;
314         gis = readb(&up->regs->r.gis) >> up->gis_shift;
315         if (gis & 1)
316                 status.sreg.isr0 = readb(&up->regs->r.isr0);
317         if (gis & 2)
318                 status.sreg.isr1 = readb(&up->regs->r.isr1);
319
320         tty = NULL;
321         if (status.stat) {
322                 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
323                                          SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
324                     (status.sreg.isr1 & SAB82532_ISR1_BRK))
325                         tty = receive_chars(up, &status);
326                 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
327                     (status.sreg.isr1 & SAB82532_ISR1_CSC))
328                         check_status(up, &status);
329                 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
330                         transmit_chars(up, &status);
331         }
332
333         spin_unlock_irqrestore(&up->port.lock, flags);
334
335         if (tty)
336                 tty_flip_buffer_push(tty);
337
338         return IRQ_HANDLED;
339 }
340
341 /* port->lock is not held.  */
342 static unsigned int sunsab_tx_empty(struct uart_port *port)
343 {
344         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
345         int ret;
346
347         /* Do not need a lock for a state test like this.  */
348         if (test_bit(SAB82532_ALLS, &up->irqflags))
349                 ret = TIOCSER_TEMT;
350         else
351                 ret = 0;
352
353         return ret;
354 }
355
356 /* port->lock held by caller.  */
357 static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
358 {
359         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
360
361         if (mctrl & TIOCM_RTS) {
362                 up->cached_mode &= ~SAB82532_MODE_FRTS;
363                 up->cached_mode |= SAB82532_MODE_RTS;
364         } else {
365                 up->cached_mode |= (SAB82532_MODE_FRTS |
366                                     SAB82532_MODE_RTS);
367         }
368         if (mctrl & TIOCM_DTR) {
369                 up->cached_pvr &= ~(up->pvr_dtr_bit);
370         } else {
371                 up->cached_pvr |= up->pvr_dtr_bit;
372         }
373
374         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
375         if (test_bit(SAB82532_XPR, &up->irqflags))
376                 sunsab_tx_idle(up);
377 }
378
379 /* port->lock is held by caller and interrupts are disabled.  */
380 static unsigned int sunsab_get_mctrl(struct uart_port *port)
381 {
382         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
383         unsigned char val;
384         unsigned int result;
385
386         result = 0;
387
388         val = readb(&up->regs->r.pvr);
389         result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
390
391         val = readb(&up->regs->r.vstr);
392         result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
393
394         val = readb(&up->regs->r.star);
395         result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
396
397         return result;
398 }
399
400 /* port->lock held by caller.  */
401 static void sunsab_stop_tx(struct uart_port *port)
402 {
403         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
404
405         up->interrupt_mask1 |= SAB82532_IMR1_XPR;
406         writeb(up->interrupt_mask1, &up->regs->w.imr1);
407 }
408
409 /* port->lock held by caller.  */
410 static void sunsab_tx_idle(struct uart_sunsab_port *up)
411 {
412         if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
413                 u8 tmp;
414
415                 clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
416                 writeb(up->cached_mode, &up->regs->rw.mode);
417                 writeb(up->cached_pvr, &up->regs->rw.pvr);
418                 writeb(up->cached_dafo, &up->regs->w.dafo);
419
420                 writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
421                 tmp = readb(&up->regs->rw.ccr2);
422                 tmp &= ~0xc0;
423                 tmp |= (up->cached_ebrg >> 2) & 0xc0;
424                 writeb(tmp, &up->regs->rw.ccr2);
425         }
426 }
427
428 /* port->lock held by caller.  */
429 static void sunsab_start_tx(struct uart_port *port)
430 {
431         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
432         struct circ_buf *xmit = &up->port.info->xmit;
433         int i;
434
435         up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
436         writeb(up->interrupt_mask1, &up->regs->w.imr1);
437         
438         if (!test_bit(SAB82532_XPR, &up->irqflags))
439                 return;
440
441         clear_bit(SAB82532_ALLS, &up->irqflags);
442         clear_bit(SAB82532_XPR, &up->irqflags);
443
444         for (i = 0; i < up->port.fifosize; i++) {
445                 writeb(xmit->buf[xmit->tail],
446                        &up->regs->w.xfifo[i]);
447                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
448                 up->port.icount.tx++;
449                 if (uart_circ_empty(xmit))
450                         break;
451         }
452
453         /* Issue a Transmit Frame command.  */
454         sunsab_cec_wait(up);
455         writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
456 }
457
458 /* port->lock is not held.  */
459 static void sunsab_send_xchar(struct uart_port *port, char ch)
460 {
461         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
462         unsigned long flags;
463
464         spin_lock_irqsave(&up->port.lock, flags);
465
466         sunsab_tec_wait(up);
467         writeb(ch, &up->regs->w.tic);
468
469         spin_unlock_irqrestore(&up->port.lock, flags);
470 }
471
472 /* port->lock held by caller.  */
473 static void sunsab_stop_rx(struct uart_port *port)
474 {
475         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
476
477         up->interrupt_mask0 |= SAB82532_ISR0_TCD;
478         writeb(up->interrupt_mask1, &up->regs->w.imr0);
479 }
480
481 /* port->lock held by caller.  */
482 static void sunsab_enable_ms(struct uart_port *port)
483 {
484         /* For now we always receive these interrupts.  */
485 }
486
487 /* port->lock is not held.  */
488 static void sunsab_break_ctl(struct uart_port *port, int break_state)
489 {
490         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
491         unsigned long flags;
492         unsigned char val;
493
494         spin_lock_irqsave(&up->port.lock, flags);
495
496         val = up->cached_dafo;
497         if (break_state)
498                 val |= SAB82532_DAFO_XBRK;
499         else
500                 val &= ~SAB82532_DAFO_XBRK;
501         up->cached_dafo = val;
502
503         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
504         if (test_bit(SAB82532_XPR, &up->irqflags))
505                 sunsab_tx_idle(up);
506
507         spin_unlock_irqrestore(&up->port.lock, flags);
508 }
509
510 /* port->lock is not held.  */
511 static int sunsab_startup(struct uart_port *port)
512 {
513         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
514         unsigned long flags;
515         unsigned char tmp;
516         int err = request_irq(up->port.irq, sunsab_interrupt,
517                               IRQF_SHARED, "sab", up);
518         if (err)
519                 return err;
520
521         spin_lock_irqsave(&up->port.lock, flags);
522
523         /*
524          * Wait for any commands or immediate characters
525          */
526         sunsab_cec_wait(up);
527         sunsab_tec_wait(up);
528
529         /*
530          * Clear the FIFO buffers.
531          */
532         writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
533         sunsab_cec_wait(up);
534         writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
535
536         /*
537          * Clear the interrupt registers.
538          */
539         (void) readb(&up->regs->r.isr0);
540         (void) readb(&up->regs->r.isr1);
541
542         /*
543          * Now, initialize the UART 
544          */
545         writeb(0, &up->regs->w.ccr0);                           /* power-down */
546         writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
547                SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
548         writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
549         writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
550                SAB82532_CCR2_TOE, &up->regs->w.ccr2);
551         writeb(0, &up->regs->w.ccr3);
552         writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
553         up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
554                            SAB82532_MODE_RAC);
555         writeb(up->cached_mode, &up->regs->w.mode);
556         writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
557         
558         tmp = readb(&up->regs->rw.ccr0);
559         tmp |= SAB82532_CCR0_PU;        /* power-up */
560         writeb(tmp, &up->regs->rw.ccr0);
561
562         /*
563          * Finally, enable interrupts
564          */
565         up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
566                                SAB82532_IMR0_PLLA);
567         writeb(up->interrupt_mask0, &up->regs->w.imr0);
568         up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
569                                SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
570                                SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
571                                SAB82532_IMR1_XPR);
572         writeb(up->interrupt_mask1, &up->regs->w.imr1);
573         set_bit(SAB82532_ALLS, &up->irqflags);
574         set_bit(SAB82532_XPR, &up->irqflags);
575
576         spin_unlock_irqrestore(&up->port.lock, flags);
577
578         return 0;
579 }
580
581 /* port->lock is not held.  */
582 static void sunsab_shutdown(struct uart_port *port)
583 {
584         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
585         unsigned long flags;
586
587         spin_lock_irqsave(&up->port.lock, flags);
588
589         /* Disable Interrupts */
590         up->interrupt_mask0 = 0xff;
591         writeb(up->interrupt_mask0, &up->regs->w.imr0);
592         up->interrupt_mask1 = 0xff;
593         writeb(up->interrupt_mask1, &up->regs->w.imr1);
594
595         /* Disable break condition */
596         up->cached_dafo = readb(&up->regs->rw.dafo);
597         up->cached_dafo &= ~SAB82532_DAFO_XBRK;
598         writeb(up->cached_dafo, &up->regs->rw.dafo);
599
600         /* Disable Receiver */  
601         up->cached_mode &= ~SAB82532_MODE_RAC;
602         writeb(up->cached_mode, &up->regs->rw.mode);
603
604         /*
605          * XXX FIXME
606          *
607          * If the chip is powered down here the system hangs/crashes during
608          * reboot or shutdown.  This needs to be investigated further,
609          * similar behaviour occurs in 2.4 when the driver is configured
610          * as a module only.  One hint may be that data is sometimes
611          * transmitted at 9600 baud during shutdown (regardless of the
612          * speed the chip was configured for when the port was open).
613          */
614 #if 0
615         /* Power Down */        
616         tmp = readb(&up->regs->rw.ccr0);
617         tmp &= ~SAB82532_CCR0_PU;
618         writeb(tmp, &up->regs->rw.ccr0);
619 #endif
620
621         spin_unlock_irqrestore(&up->port.lock, flags);
622         free_irq(up->port.irq, up);
623 }
624
625 /*
626  * This is used to figure out the divisor speeds.
627  *
628  * The formula is:    Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
629  *
630  * with               0 <= N < 64 and 0 <= M < 16
631  */
632
633 static void calc_ebrg(int baud, int *n_ret, int *m_ret)
634 {
635         int     n, m;
636
637         if (baud == 0) {
638                 *n_ret = 0;
639                 *m_ret = 0;
640                 return;
641         }
642      
643         /*
644          * We scale numbers by 10 so that we get better accuracy
645          * without having to use floating point.  Here we increment m
646          * until n is within the valid range.
647          */
648         n = (SAB_BASE_BAUD * 10) / baud;
649         m = 0;
650         while (n >= 640) {
651                 n = n / 2;
652                 m++;
653         }
654         n = (n+5) / 10;
655         /*
656          * We try very hard to avoid speeds with M == 0 since they may
657          * not work correctly for XTAL frequences above 10 MHz.
658          */
659         if ((m == 0) && ((n & 1) == 0)) {
660                 n = n / 2;
661                 m++;
662         }
663         *n_ret = n - 1;
664         *m_ret = m;
665 }
666
667 /* Internal routine, port->lock is held and local interrupts are disabled.  */
668 static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
669                                   unsigned int iflag, unsigned int baud,
670                                   unsigned int quot)
671 {
672         unsigned char dafo;
673         int bits, n, m;
674
675         /* Byte size and parity */
676         switch (cflag & CSIZE) {
677               case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
678               case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
679               case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
680               case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
681               /* Never happens, but GCC is too dumb to figure it out */
682               default:  dafo = SAB82532_DAFO_CHL5; bits = 7; break;
683         }
684
685         if (cflag & CSTOPB) {
686                 dafo |= SAB82532_DAFO_STOP;
687                 bits++;
688         }
689
690         if (cflag & PARENB) {
691                 dafo |= SAB82532_DAFO_PARE;
692                 bits++;
693         }
694
695         if (cflag & PARODD) {
696                 dafo |= SAB82532_DAFO_PAR_ODD;
697         } else {
698                 dafo |= SAB82532_DAFO_PAR_EVEN;
699         }
700         up->cached_dafo = dafo;
701
702         calc_ebrg(baud, &n, &m);
703
704         up->cached_ebrg = n | (m << 6);
705
706         up->tec_timeout = (10 * 1000000) / baud;
707         up->cec_timeout = up->tec_timeout >> 2;
708
709         /* CTS flow control flags */
710         /* We encode read_status_mask and ignore_status_mask like so:
711          *
712          * ---------------------
713          * | ... | ISR1 | ISR0 |
714          * ---------------------
715          *  ..    15   8 7    0
716          */
717
718         up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
719                                      SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
720                                      SAB82532_ISR0_CDSC);
721         up->port.read_status_mask |= (SAB82532_ISR1_CSC |
722                                       SAB82532_ISR1_ALLS |
723                                       SAB82532_ISR1_XPR) << 8;
724         if (iflag & INPCK)
725                 up->port.read_status_mask |= (SAB82532_ISR0_PERR |
726                                               SAB82532_ISR0_FERR);
727         if (iflag & (BRKINT | PARMRK))
728                 up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
729
730         /*
731          * Characteres to ignore
732          */
733         up->port.ignore_status_mask = 0;
734         if (iflag & IGNPAR)
735                 up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
736                                                 SAB82532_ISR0_FERR);
737         if (iflag & IGNBRK) {
738                 up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
739                 /*
740                  * If we're ignoring parity and break indicators,
741                  * ignore overruns too (for real raw support).
742                  */
743                 if (iflag & IGNPAR)
744                         up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
745         }
746
747         /*
748          * ignore all characters if CREAD is not set
749          */
750         if ((cflag & CREAD) == 0)
751                 up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
752                                                 SAB82532_ISR0_TCD);
753
754         uart_update_timeout(&up->port, cflag,
755                             (up->port.uartclk / (16 * quot)));
756
757         /* Now schedule a register update when the chip's
758          * transmitter is idle.
759          */
760         up->cached_mode |= SAB82532_MODE_RAC;
761         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
762         if (test_bit(SAB82532_XPR, &up->irqflags))
763                 sunsab_tx_idle(up);
764 }
765
766 /* port->lock is not held.  */
767 static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
768                                struct ktermios *old)
769 {
770         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
771         unsigned long flags;
772         unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
773         unsigned int quot = uart_get_divisor(port, baud);
774
775         spin_lock_irqsave(&up->port.lock, flags);
776         sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
777         spin_unlock_irqrestore(&up->port.lock, flags);
778 }
779
780 static const char *sunsab_type(struct uart_port *port)
781 {
782         struct uart_sunsab_port *up = (void *)port;
783         static char buf[36];
784         
785         sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
786         return buf;
787 }
788
789 static void sunsab_release_port(struct uart_port *port)
790 {
791 }
792
793 static int sunsab_request_port(struct uart_port *port)
794 {
795         return 0;
796 }
797
798 static void sunsab_config_port(struct uart_port *port, int flags)
799 {
800 }
801
802 static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
803 {
804         return -EINVAL;
805 }
806
807 static struct uart_ops sunsab_pops = {
808         .tx_empty       = sunsab_tx_empty,
809         .set_mctrl      = sunsab_set_mctrl,
810         .get_mctrl      = sunsab_get_mctrl,
811         .stop_tx        = sunsab_stop_tx,
812         .start_tx       = sunsab_start_tx,
813         .send_xchar     = sunsab_send_xchar,
814         .stop_rx        = sunsab_stop_rx,
815         .enable_ms      = sunsab_enable_ms,
816         .break_ctl      = sunsab_break_ctl,
817         .startup        = sunsab_startup,
818         .shutdown       = sunsab_shutdown,
819         .set_termios    = sunsab_set_termios,
820         .type           = sunsab_type,
821         .release_port   = sunsab_release_port,
822         .request_port   = sunsab_request_port,
823         .config_port    = sunsab_config_port,
824         .verify_port    = sunsab_verify_port,
825 };
826
827 static struct uart_driver sunsab_reg = {
828         .owner                  = THIS_MODULE,
829         .driver_name            = "sunsab",
830         .dev_name               = "ttyS",
831         .major                  = TTY_MAJOR,
832 };
833
834 static struct uart_sunsab_port *sunsab_ports;
835
836 #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
837
838 static void sunsab_console_putchar(struct uart_port *port, int c)
839 {
840         struct uart_sunsab_port *up = (struct uart_sunsab_port *)port;
841
842         sunsab_tec_wait(up);
843         writeb(c, &up->regs->w.tic);
844 }
845
846 static void sunsab_console_write(struct console *con, const char *s, unsigned n)
847 {
848         struct uart_sunsab_port *up = &sunsab_ports[con->index];
849         unsigned long flags;
850         int locked = 1;
851
852         local_irq_save(flags);
853         if (up->port.sysrq) {
854                 locked = 0;
855         } else if (oops_in_progress) {
856                 locked = spin_trylock(&up->port.lock);
857         } else
858                 spin_lock(&up->port.lock);
859
860         uart_console_write(&up->port, s, n, sunsab_console_putchar);
861         sunsab_tec_wait(up);
862
863         if (locked)
864                 spin_unlock(&up->port.lock);
865         local_irq_restore(flags);
866 }
867
868 static int sunsab_console_setup(struct console *con, char *options)
869 {
870         struct uart_sunsab_port *up = &sunsab_ports[con->index];
871         unsigned long flags;
872         unsigned int baud, quot;
873
874         /*
875          * The console framework calls us for each and every port
876          * registered. Defer the console setup until the requested
877          * port has been properly discovered. A bit of a hack,
878          * though...
879          */
880         if (up->port.type != PORT_SUNSAB)
881                 return -1;
882
883         printk("Console: ttyS%d (SAB82532)\n",
884                (sunsab_reg.minor - 64) + con->index);
885
886         sunserial_console_termios(con);
887
888         switch (con->cflag & CBAUD) {
889         case B150: baud = 150; break;
890         case B300: baud = 300; break;
891         case B600: baud = 600; break;
892         case B1200: baud = 1200; break;
893         case B2400: baud = 2400; break;
894         case B4800: baud = 4800; break;
895         default: case B9600: baud = 9600; break;
896         case B19200: baud = 19200; break;
897         case B38400: baud = 38400; break;
898         case B57600: baud = 57600; break;
899         case B115200: baud = 115200; break;
900         case B230400: baud = 230400; break;
901         case B460800: baud = 460800; break;
902         };
903
904         /*
905          * Temporary fix.
906          */
907         spin_lock_init(&up->port.lock);
908
909         /*
910          * Initialize the hardware
911          */
912         sunsab_startup(&up->port);
913
914         spin_lock_irqsave(&up->port.lock, flags);
915
916         /*
917          * Finally, enable interrupts
918          */
919         up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
920                                 SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
921         writeb(up->interrupt_mask0, &up->regs->w.imr0);
922         up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
923                                 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
924                                 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
925                                 SAB82532_IMR1_XPR;
926         writeb(up->interrupt_mask1, &up->regs->w.imr1);
927
928         quot = uart_get_divisor(&up->port, baud);
929         sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
930         sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
931
932         spin_unlock_irqrestore(&up->port.lock, flags);
933         
934         return 0;
935 }
936
937 static struct console sunsab_console = {
938         .name   =       "ttyS",
939         .write  =       sunsab_console_write,
940         .device =       uart_console_device,
941         .setup  =       sunsab_console_setup,
942         .flags  =       CON_PRINTBUFFER,
943         .index  =       -1,
944         .data   =       &sunsab_reg,
945 };
946
947 static inline struct console *SUNSAB_CONSOLE(void)
948 {
949         return &sunsab_console;
950 }
951 #else
952 #define SUNSAB_CONSOLE()        (NULL)
953 #define sunsab_console_init()   do { } while (0)
954 #endif
955
956 static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
957                                      struct of_device *op,
958                                      unsigned long offset,
959                                      int line)
960 {
961         up->port.line = line;
962         up->port.dev = &op->dev;
963
964         up->port.mapbase = op->resource[0].start + offset;
965         up->port.membase = of_ioremap(&op->resource[0], offset,
966                                       sizeof(union sab82532_async_regs),
967                                       "sab");
968         if (!up->port.membase)
969                 return -ENOMEM;
970         up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
971
972         up->port.irq = op->irqs[0];
973
974         up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
975         up->port.iotype = UPIO_MEM;
976
977         writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
978
979         up->port.ops = &sunsab_pops;
980         up->port.type = PORT_SUNSAB;
981         up->port.uartclk = SAB_BASE_BAUD;
982
983         up->type = readb(&up->regs->r.vstr) & 0x0f;
984         writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
985         writeb(0xff, &up->regs->w.pim);
986         if ((up->port.line & 0x1) == 0) {
987                 up->pvr_dsr_bit = (1 << 0);
988                 up->pvr_dtr_bit = (1 << 1);
989                 up->gis_shift = 2;
990         } else {
991                 up->pvr_dsr_bit = (1 << 3);
992                 up->pvr_dtr_bit = (1 << 2);
993                 up->gis_shift = 0;
994         }
995         up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
996         writeb(up->cached_pvr, &up->regs->w.pvr);
997         up->cached_mode = readb(&up->regs->rw.mode);
998         up->cached_mode |= SAB82532_MODE_FRTS;
999         writeb(up->cached_mode, &up->regs->rw.mode);
1000         up->cached_mode |= SAB82532_MODE_RTS;
1001         writeb(up->cached_mode, &up->regs->rw.mode);
1002
1003         up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
1004         up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
1005
1006         return 0;
1007 }
1008
1009 static int __devinit sab_probe(struct of_device *op, const struct of_device_id *match)
1010 {
1011         static int inst;
1012         struct uart_sunsab_port *up;
1013         int err;
1014
1015         up = &sunsab_ports[inst * 2];
1016
1017         err = sunsab_init_one(&up[0], op,
1018                               0,
1019                               (inst * 2) + 0);
1020         if (err)
1021                 goto out;
1022
1023         err = sunsab_init_one(&up[1], op,
1024                               sizeof(union sab82532_async_regs),
1025                               (inst * 2) + 1);
1026         if (err)
1027                 goto out1;
1028
1029         sunserial_console_match(SUNSAB_CONSOLE(), op->node,
1030                                 &sunsab_reg, up[0].port.line);
1031
1032         sunserial_console_match(SUNSAB_CONSOLE(), op->node,
1033                                 &sunsab_reg, up[1].port.line);
1034
1035         err = uart_add_one_port(&sunsab_reg, &up[0].port);
1036         if (err)
1037                 goto out2;
1038
1039         err = uart_add_one_port(&sunsab_reg, &up[1].port);
1040         if (err)
1041                 goto out3;
1042
1043         dev_set_drvdata(&op->dev, &up[0]);
1044
1045         inst++;
1046
1047         return 0;
1048
1049 out3:
1050         uart_remove_one_port(&sunsab_reg, &up[0].port);
1051 out2:
1052         of_iounmap(&op->resource[0],
1053                    up[1].port.membase,
1054                    sizeof(union sab82532_async_regs));
1055 out1:
1056         of_iounmap(&op->resource[0],
1057                    up[0].port.membase,
1058                    sizeof(union sab82532_async_regs));
1059 out:
1060         return err;
1061 }
1062
1063 static int __devexit sab_remove(struct of_device *op)
1064 {
1065         struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
1066
1067         uart_remove_one_port(&sunsab_reg, &up[1].port);
1068         uart_remove_one_port(&sunsab_reg, &up[0].port);
1069         of_iounmap(&op->resource[0],
1070                    up[1].port.membase,
1071                    sizeof(union sab82532_async_regs));
1072         of_iounmap(&op->resource[0],
1073                    up[0].port.membase,
1074                    sizeof(union sab82532_async_regs));
1075
1076         dev_set_drvdata(&op->dev, NULL);
1077
1078         return 0;
1079 }
1080
1081 static const struct of_device_id sab_match[] = {
1082         {
1083                 .name = "se",
1084         },
1085         {
1086                 .name = "serial",
1087                 .compatible = "sab82532",
1088         },
1089         {},
1090 };
1091 MODULE_DEVICE_TABLE(of, sab_match);
1092
1093 static struct of_platform_driver sab_driver = {
1094         .name           = "sab",
1095         .match_table    = sab_match,
1096         .probe          = sab_probe,
1097         .remove         = __devexit_p(sab_remove),
1098 };
1099
1100 static int __init sunsab_init(void)
1101 {
1102         struct device_node *dp;
1103         int err;
1104         int num_channels = 0;
1105
1106         for_each_node_by_name(dp, "se")
1107                 num_channels += 2;
1108         for_each_node_by_name(dp, "serial") {
1109                 if (of_device_is_compatible(dp, "sab82532"))
1110                         num_channels += 2;
1111         }
1112
1113         if (num_channels) {
1114                 sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) *
1115                                        num_channels, GFP_KERNEL);
1116                 if (!sunsab_ports)
1117                         return -ENOMEM;
1118
1119                 sunsab_reg.cons = SUNSAB_CONSOLE();
1120                 err = sunserial_register_minors(&sunsab_reg, num_channels);
1121                 if (err) {
1122                         kfree(sunsab_ports);
1123                         sunsab_ports = NULL;
1124
1125                         return err;
1126                 }
1127         }
1128
1129         return of_register_driver(&sab_driver, &of_bus_type);
1130 }
1131
1132 static void __exit sunsab_exit(void)
1133 {
1134         of_unregister_driver(&sab_driver);
1135         if (sunsab_reg.nr) {
1136                 sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
1137         }
1138
1139         kfree(sunsab_ports);
1140         sunsab_ports = NULL;
1141 }
1142
1143 module_init(sunsab_init);
1144 module_exit(sunsab_exit);
1145
1146 MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
1147 MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
1148 MODULE_LICENSE("GPL");