2 * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board.
4 * Author: Mark A. Greer <mgreer@mvista.com>
6 * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
13 * The EV-64260-BP port is the result of hard work from many people from
14 * many companies. In particular, employees of Marvell/Galileo, Mission
15 * Critical Linux, Xyterra, and MontaVista Software were heavily involved.
17 * Note: I have not been able to get *all* PCI slots to work reliably
18 * at 66 MHz. I recommend setting jumpers J15 & J16 to short pins 1&2
19 * so that 33 MHz is used. --MAG
20 * Note: The 750CXe and 7450 are not stable with a 125MHz or 133MHz TCLK/SYSCLK.
21 * At 100MHz, they are solid.
24 #include <linux/delay.h>
25 #include <linux/pci.h>
26 #include <linux/ide.h>
27 #include <linux/irq.h>
29 #include <linux/seq_file.h>
30 #include <linux/console.h>
31 #include <linux/initrd.h>
32 #include <linux/root_dev.h>
33 #include <linux/platform_device.h>
34 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
35 #include <linux/serial.h>
36 #include <linux/tty.h>
37 #include <linux/serial_core.h>
39 #include <linux/mv643xx.h>
41 #include <asm/bootinfo.h>
42 #include <asm/machdep.h>
43 #include <asm/mv64x60.h>
47 #include <platforms/ev64260.h>
49 #define BOARD_VENDOR "Marvell/Galileo"
50 #define BOARD_MACHINE "EV-64260-BP"
52 static struct mv64x60_handle bh;
54 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
55 extern void gen550_progress(char *, unsigned short);
56 extern void gen550_init(int, struct uart_port *);
59 static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
60 18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
62 static const unsigned int cpu_745x[2][16] = { /* PLL_EXT 0 & 1 */
63 { 1, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 },
64 { 0, 30, 0, 2, 0, 26, 0, 18, 0, 22, 20, 24, 28, 32, 0, 0 }
71 ev64260_get_bus_speed(void)
77 ev64260_get_cpu_speed(void)
79 unsigned long pvr, hid1, pll_ext;
81 pvr = PVR_VER(mfspr(SPRN_PVR));
83 if (pvr != PVR_VER(PVR_7450)) {
84 hid1 = mfspr(SPRN_HID1) >> 28;
85 return ev64260_get_bus_speed() * cpu_7xx[hid1]/2;
88 hid1 = (mfspr(SPRN_HID1) & 0x0001e000) >> 13;
89 pll_ext = 0; /* No way to read; must get from schematic */
90 return ev64260_get_bus_speed() * cpu_745x[pll_ext][hid1]/2;
95 ev64260_find_end_of_memory(void)
97 return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
98 MV64x60_TYPE_GT64260A);
102 * Marvell/Galileo EV-64260-BP Evaluation Board PCI interrupt routing.
103 * Note: By playing with J8 and JP1-4, you can get 2 IRQ's from the first
104 * PCI bus (in which cast, INTPIN B would be EV64260_PCI_1_IRQ).
105 * This is the most IRQs you can get from one bus with this board, though.
108 ev64260_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
110 struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
112 if (hose->index == 0) {
113 static char pci_irq_table[][4] =
115 * PCI IDSEL/INTPIN->INTLINE
119 {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 0 */
120 {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 0 */
123 const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
124 return PCI_IRQ_TABLE_LOOKUP;
127 static char pci_irq_table[][4] =
129 * PCI IDSEL/INTPIN->INTLINE
133 { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 1 */
134 { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 1 */
137 const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
138 return PCI_IRQ_TABLE_LOOKUP;
143 ev64260_setup_peripherals(void)
145 mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
146 EV64260_EMB_FLASH_BASE, EV64260_EMB_FLASH_SIZE, 0);
147 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
148 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
149 EV64260_EXT_SRAM_BASE, EV64260_EXT_SRAM_SIZE, 0);
150 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
151 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
152 EV64260_TODC_BASE, EV64260_TODC_SIZE, 0);
153 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
154 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
155 EV64260_UART_BASE, EV64260_UART_SIZE, 0);
156 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
157 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
158 EV64260_EXT_FLASH_BASE, EV64260_EXT_FLASH_SIZE, 0);
159 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
161 TODC_INIT(TODC_TYPE_DS1501, 0, 0,
162 ioremap(EV64260_TODC_BASE, EV64260_TODC_SIZE), 8);
164 mv64x60_clr_bits(&bh, MV64x60_CPU_CONFIG,((1<<12) | (1<<28) | (1<<29)));
165 mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<27));
167 if (ev64260_get_bus_speed() > 100000000)
168 mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<23));
170 mv64x60_set_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
171 mv64x60_set_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
174 * Enabling of PCI internal-vs-external arbitration
175 * is a platform- and errata-dependent decision.
177 if (bh.type == MV64x60_TYPE_GT64260A ) {
178 mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
179 mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
182 mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
185 * Turn off timer/counters. Not turning off watchdog timer because
186 * can't read its reg on the 64260A so don't know if we'll be enabling
189 mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
190 ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
191 mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
192 ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
195 * Set MPSC Multiplex RMII
196 * NOTE: ethernet driver modifies bit 0 and 1
198 mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
201 * The EV-64260-BP uses several Multi-Purpose Pins (MPP) on the 64260
202 * bridge as interrupt inputs (via the General Purpose Ports (GPP)
203 * register). Need to route the MPP inputs to the GPP and set the
204 * polarity correctly.
206 * In MPP Control 2 Register
207 * MPP 21 -> GPP 21 (DUART channel A intr) bits 20-23 -> 0
208 * MPP 22 -> GPP 22 (DUART channel B intr) bits 24-27 -> 0
210 mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_2, (0xf<<20) | (0xf<<24) );
213 * In MPP Control 3 Register
214 * MPP 26 -> GPP 26 (RTC INT) bits 8-11 -> 0
215 * MPP 27 -> GPP 27 (PCI 0 INTA) bits 12-15 -> 0
216 * MPP 29 -> GPP 29 (PCI 1 INTA) bits 20-23 -> 0
218 mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3, (0xf<<8)|(0xf<<12)|(0xf<<20));
220 #define GPP_EXTERNAL_INTERRUPTS \
221 ((1<<21) | (1<<22) | (1<<26) | (1<<27) | (1<<29))
222 /* DUART & PCI interrupts are inputs */
223 mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
224 /* DUART & PCI interrupts are active low */
225 mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
227 /* Clear any pending interrupts for these inputs and enable them. */
228 mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
229 mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
235 ev64260_setup_bridge(void)
237 struct mv64x60_setup_info si;
240 memset(&si, 0, sizeof(si));
242 si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
244 si.pci_0.enable_bus = 1;
245 si.pci_0.pci_io.cpu_base = EV64260_PCI0_IO_CPU_BASE;
246 si.pci_0.pci_io.pci_base_hi = 0;
247 si.pci_0.pci_io.pci_base_lo = EV64260_PCI0_IO_PCI_BASE;
248 si.pci_0.pci_io.size = EV64260_PCI0_IO_SIZE;
249 si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
250 si.pci_0.pci_mem[0].cpu_base = EV64260_PCI0_MEM_CPU_BASE;
251 si.pci_0.pci_mem[0].pci_base_hi = 0;
252 si.pci_0.pci_mem[0].pci_base_lo = EV64260_PCI0_MEM_PCI_BASE;
253 si.pci_0.pci_mem[0].size = EV64260_PCI0_MEM_SIZE;
254 si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
255 si.pci_0.pci_cmd_bits = 0;
256 si.pci_0.latency_timer = 0x8;
258 si.pci_1.enable_bus = 1;
259 si.pci_1.pci_io.cpu_base = EV64260_PCI1_IO_CPU_BASE;
260 si.pci_1.pci_io.pci_base_hi = 0;
261 si.pci_1.pci_io.pci_base_lo = EV64260_PCI1_IO_PCI_BASE;
262 si.pci_1.pci_io.size = EV64260_PCI1_IO_SIZE;
263 si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
264 si.pci_1.pci_mem[0].cpu_base = EV64260_PCI1_MEM_CPU_BASE;
265 si.pci_1.pci_mem[0].pci_base_hi = 0;
266 si.pci_1.pci_mem[0].pci_base_lo = EV64260_PCI1_MEM_PCI_BASE;
267 si.pci_1.pci_mem[0].size = EV64260_PCI1_MEM_SIZE;
268 si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
269 si.pci_1.pci_cmd_bits = 0;
270 si.pci_1.latency_timer = 0x8;
272 for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
273 si.cpu_prot_options[i] = 0;
274 si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
275 si.pci_0.acc_cntl_options[i] =
276 GT64260_PCI_ACC_CNTL_DREADEN |
277 GT64260_PCI_ACC_CNTL_RDPREFETCH |
278 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
279 GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
280 GT64260_PCI_ACC_CNTL_SWAP_NONE |
281 GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
282 si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
283 si.pci_1.acc_cntl_options[i] =
284 GT64260_PCI_ACC_CNTL_DREADEN |
285 GT64260_PCI_ACC_CNTL_RDPREFETCH |
286 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
287 GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
288 GT64260_PCI_ACC_CNTL_SWAP_NONE |
289 GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
290 si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
293 /* Lookup PCI host bridges */
294 if (mv64x60_init(&bh, &si))
295 printk(KERN_ERR "Bridge initialization failed.\n");
297 pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
298 ppc_md.pci_swizzle = common_swizzle;
299 ppc_md.pci_map_irq = ev64260_map_irq;
300 ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
302 mv64x60_set_bus(&bh, 0, 0);
303 bh.hose_a->first_busno = 0;
304 bh.hose_a->last_busno = 0xff;
305 bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
307 bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
308 mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
309 bh.hose_b->last_busno = 0xff;
310 bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
311 bh.hose_b->first_busno);
316 #if defined(CONFIG_SERIAL_8250) && !defined(CONFIG_SERIAL_MPSC_CONSOLE)
318 ev64260_early_serial_map(void)
320 struct uart_port port;
321 static char first_time = 1;
324 memset(&port, 0, sizeof(port));
326 port.membase = ioremap(EV64260_SERIAL_0, EV64260_UART_SIZE);
327 port.irq = EV64260_UART_0_IRQ;
328 port.uartclk = BASE_BAUD * 16;
330 port.iotype = UPIO_MEM;
331 port.flags = STD_COM_FLAGS;
333 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
334 gen550_init(0, &port);
337 if (early_serial_setup(&port) != 0)
338 printk(KERN_WARNING "Early serial init of port 0"
346 #elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
348 ev64260_early_serial_map(void)
354 ev64260_setup_arch(void)
357 ppc_md.progress("ev64260_setup_arch: enter", 0);
359 #ifdef CONFIG_BLK_DEV_INITRD
361 ROOT_DEV = Root_RAM0;
364 #ifdef CONFIG_ROOT_NFS
367 ROOT_DEV = Root_SDA2;
371 ppc_md.progress("ev64260_setup_arch: Enabling L2 cache", 0);
373 /* Enable L2 and L3 caches (if 745x) */
374 _set_L2CR(_get_L2CR() | L2CR_L2E);
375 _set_L3CR(_get_L3CR() | L3CR_L3E);
378 ppc_md.progress("ev64260_setup_arch: Initializing bridge", 0);
380 ev64260_setup_bridge(); /* set up PCI bridge(s) */
381 ev64260_setup_peripherals(); /* set up chip selects/GPP/MPP etc */
384 ppc_md.progress("ev64260_setup_arch: bridge init complete", 0);
386 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
387 ev64260_early_serial_map();
390 printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc."
391 "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
394 ppc_md.progress("ev64260_setup_arch: exit", 0);
399 /* Platform device data fixup routines. */
400 #if defined(CONFIG_SERIAL_MPSC)
402 ev64260_fixup_mpsc_pdata(struct platform_device *pdev)
404 struct mpsc_pdata *pdata;
406 pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
408 pdata->max_idle = 40;
409 pdata->default_baud = EV64260_DEFAULT_BAUD;
410 pdata->brg_clk_src = EV64260_MPSC_CLK_SRC;
411 pdata->brg_clk_freq = EV64260_MPSC_CLK_FREQ;
417 ev64260_platform_notify(struct device *dev)
421 void ((*rtn)(struct platform_device *pdev));
423 { MPSC_CTLR_NAME ".0", ev64260_fixup_mpsc_pdata },
424 { MPSC_CTLR_NAME ".1", ev64260_fixup_mpsc_pdata },
426 struct platform_device *pdev;
429 if (dev && dev->bus_id)
430 for (i=0; i<ARRAY_SIZE(dev_map); i++)
431 if (!strncmp(dev->bus_id, dev_map[i].bus_id,
434 pdev = container_of(dev,
435 struct platform_device, dev);
436 dev_map[i].rtn(pdev);
444 ev64260_reset_board(void *addr)
448 /* disable and invalidate the L2 cache */
452 /* flush and disable L1 I/D cache */
466 /* unmap any other random cs's that might overlap with bootcs */
467 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, 0, 0, 0);
468 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
469 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, 0, 0, 0);
470 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
471 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, 0, 0, 0);
472 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
473 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, 0, 0, 0);
474 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
476 /* map bootrom back in to gt @ reset defaults */
477 mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
478 0xff800000, 8*1024*1024, 0);
479 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
481 /* move reg base back to default, setup default pci0 */
482 mv64x60_write(&bh, MV64x60_INTERNAL_SPACE_DECODE,
483 (1<<24) | CONFIG_MV64X60_BASE >> 20);
485 /* NOTE: FROM NOW ON no more GT_REGS accesses.. 0x1 is not mapped
486 * via BAT or MMU, and MSR IR/DR is ON */
487 /* SRR0 has system reset vector, SRR1 has default MSR value */
488 /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
489 /* NOTE: assumes reset vector is at 0xfff00100 */
501 ev64260_restart(char *cmd)
503 volatile ulong i = 10000000;
505 ev64260_reset_board((void *)0xfff00100);
508 panic("restart failed\n");
520 ev64260_power_off(void)
527 ev64260_show_cpuinfo(struct seq_file *m)
531 pvid = mfspr(SPRN_PVR);
532 seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
533 seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
534 seq_printf(m, "cpu MHz\t\t: %d\n", ev64260_get_cpu_speed()/1000/1000);
535 seq_printf(m, "bus MHz\t\t: %d\n", ev64260_get_bus_speed()/1000/1000);
540 /* DS1501 RTC has too much variation to use RTC for calibration */
542 ev64260_calibrate_decr(void)
546 freq = ev64260_get_bus_speed()/4;
548 printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
549 freq/1000000, freq%1000000);
551 tb_ticks_per_jiffy = freq / HZ;
552 tb_to_us = mulhwu_scale_factor(freq, 1000000);
558 * Set BAT 3 to map 0xfb000000 to 0xfc000000 of physical memory space.
560 static __inline__ void
561 ev64260_set_bat(void)
564 mtspr(SPRN_DBAT1U, 0xfb0001fe);
565 mtspr(SPRN_DBAT1L, 0xfb00002a);
571 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
575 io_block_mapping(0xfb000000, 0xfb000000, 0x01000000, _PAGE_IO);
580 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
581 unsigned long r6, unsigned long r7)
583 #ifdef CONFIG_BLK_DEV_INITRD
584 extern int initrd_below_start_ok;
586 initrd_start=initrd_end=0;
587 initrd_below_start_ok=0;
588 #endif /* CONFIG_BLK_DEV_INITRD */
590 parse_bootinfo(find_bootinfo());
593 isa_io_base = EV64260_PCI0_IO_CPU_BASE;
594 pci_dram_offset = EV64260_PCI0_MEM_CPU_BASE;
596 loops_per_jiffy = ev64260_get_cpu_speed() / HZ;
598 ppc_md.setup_arch = ev64260_setup_arch;
599 ppc_md.show_cpuinfo = ev64260_show_cpuinfo;
600 ppc_md.init_IRQ = gt64260_init_irq;
601 ppc_md.get_irq = gt64260_get_irq;
603 ppc_md.restart = ev64260_restart;
604 ppc_md.power_off = ev64260_power_off;
605 ppc_md.halt = ev64260_halt;
607 ppc_md.find_end_of_memory = ev64260_find_end_of_memory;
611 ppc_md.time_init = todc_time_init;
612 ppc_md.set_rtc_time = todc_set_rtc_time;
613 ppc_md.get_rtc_time = todc_get_rtc_time;
614 ppc_md.nvram_read_val = todc_direct_read_val;
615 ppc_md.nvram_write_val = todc_direct_write_val;
616 ppc_md.calibrate_decr = ev64260_calibrate_decr;
618 bh.p_base = CONFIG_MV64X60_NEW_BASE;
622 #ifdef CONFIG_SERIAL_8250
623 #if defined(CONFIG_SERIAL_TEXT_DEBUG)
624 ppc_md.setup_io_mappings = ev64260_map_io;
625 ppc_md.progress = gen550_progress;
627 #if defined(CONFIG_KGDB)
628 ppc_md.setup_io_mappings = ev64260_map_io;
629 ppc_md.early_serial_map = ev64260_early_serial_map;
631 #elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
632 #ifdef CONFIG_SERIAL_TEXT_DEBUG
633 ppc_md.setup_io_mappings = ev64260_map_io;
634 ppc_md.progress = mv64x60_mpsc_progress;
635 mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
636 #endif /* CONFIG_SERIAL_TEXT_DEBUG */
638 ppc_md.setup_io_mappings = ev64260_map_io;
639 ppc_md.early_serial_map = ev64260_early_serial_map;
640 #endif /* CONFIG_KGDB */
644 #if defined(CONFIG_SERIAL_MPSC)
645 platform_notify = ev64260_platform_notify;