git.oblomov.eu Git - linux-2.6/blob - drivers/media/common/tuners/xc5000.c

   1 /*
   2  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
   3  *
   4  *  Copyright (c) 2007 Xceive Corporation
   5  *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License, or
  10  *  (at your option) any later version.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *
  16  *  GNU General Public License for more details.
  17  *
  18  *  You should have received a copy of the GNU General Public License
  19  *  along with this program; if not, write to the Free Software
  20  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/moduleparam.h>
  25 #include <linux/videodev2.h>
  26 #include <linux/delay.h>
  27 #include <linux/dvb/frontend.h>
  28 #include <linux/i2c.h>
  29
  30 #include "dvb_frontend.h"
  31
  32 #include "xc5000.h"
  33 #include "tuner-i2c.h"
  34
  35 static int debug;
  36 module_param(debug, int, 0644);
  37 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
  38
  39 static int xc5000_load_fw_on_attach;
  40 module_param_named(init_fw, xc5000_load_fw_on_attach, int, 0644);
  41 MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization.");
  42
  43 static DEFINE_MUTEX(xc5000_list_mutex);
  44 static LIST_HEAD(hybrid_tuner_instance_list);
  45
  46 #define dprintk(level,fmt, arg...) if (debug >= level) \
  47         printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
  48
  49 #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw"
  50 #define XC5000_DEFAULT_FIRMWARE_SIZE 12332
  51
  52 struct xc5000_priv {
  53         struct tuner_i2c_props i2c_props;
  54         struct list_head hybrid_tuner_instance_list;
  55
  56         u32 if_khz;
  57         u32 freq_hz;
  58         u32 bandwidth;
  59         u8  video_standard;
  60         u8  rf_mode;
  61 };
  62
  63 /* Misc Defines */
  64 #define MAX_TV_STANDARD                 23
  65 #define XC_MAX_I2C_WRITE_LENGTH         64
  66
  67 /* Signal Types */
  68 #define XC_RF_MODE_AIR                  0
  69 #define XC_RF_MODE_CABLE                1
  70
  71 /* Result codes */
  72 #define XC_RESULT_SUCCESS               0
  73 #define XC_RESULT_RESET_FAILURE         1
  74 #define XC_RESULT_I2C_WRITE_FAILURE     2
  75 #define XC_RESULT_I2C_READ_FAILURE      3
  76 #define XC_RESULT_OUT_OF_RANGE          5
  77
  78 /* Product id */
  79 #define XC_PRODUCT_ID_FW_NOT_LOADED     0x2000
  80 #define XC_PRODUCT_ID_FW_LOADED         0x1388
  81
  82 /* Registers */
  83 #define XREG_INIT         0x00
  84 #define XREG_VIDEO_MODE   0x01
  85 #define XREG_AUDIO_MODE   0x02
  86 #define XREG_RF_FREQ      0x03
  87 #define XREG_D_CODE       0x04
  88 #define XREG_IF_OUT       0x05
  89 #define XREG_SEEK_MODE    0x07
  90 #define XREG_POWER_DOWN   0x0A
  91 #define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
  92 #define XREG_SMOOTHEDCVBS 0x0E
  93 #define XREG_XTALFREQ     0x0F
  94 #define XREG_FINERFFREQ   0x10
  95 #define XREG_DDIMODE      0x11
  96
  97 #define XREG_ADC_ENV      0x00
  98 #define XREG_QUALITY      0x01
  99 #define XREG_FRAME_LINES  0x02
 100 #define XREG_HSYNC_FREQ   0x03
 101 #define XREG_LOCK         0x04
 102 #define XREG_FREQ_ERROR   0x05
 103 #define XREG_SNR          0x06
 104 #define XREG_VERSION      0x07
 105 #define XREG_PRODUCT_ID   0x08
 106 #define XREG_BUSY         0x09
 107
 108 /*
 109    Basic firmware description. This will remain with
 110    the driver for documentation purposes.
 111
 112    This represents an I2C firmware file encoded as a
 113    string of unsigned char. Format is as follows:
 114
 115    char[0  ]=len0_MSB  -> len = len_MSB * 256 + len_LSB
 116    char[1  ]=len0_LSB  -> length of first write transaction
 117    char[2  ]=data0 -> first byte to be sent
 118    char[3  ]=data1
 119    char[4  ]=data2
 120    char[   ]=...
 121    char[M  ]=dataN  -> last byte to be sent
 122    char[M+1]=len1_MSB  -> len = len_MSB * 256 + len_LSB
 123    char[M+2]=len1_LSB  -> length of second write transaction
 124    char[M+3]=data0
 125    char[M+4]=data1
 126    ...
 127    etc.
 128
 129    The [len] value should be interpreted as follows:
 130
 131    len= len_MSB _ len_LSB
 132    len=1111_1111_1111_1111   : End of I2C_SEQUENCE
 133    len=0000_0000_0000_0000   : Reset command: Do hardware reset
 134    len=0NNN_NNNN_NNNN_NNNN   : Normal transaction: number of bytes = {1:32767)
 135    len=1WWW_WWWW_WWWW_WWWW   : Wait command: wait for {1:32767} ms
 136
 137    For the RESET and WAIT commands, the two following bytes will contain
 138    immediately the length of the following transaction.
 139
 140 */
 141 typedef struct {
 142         char *Name;
 143         u16 AudioMode;
 144         u16 VideoMode;
 145 } XC_TV_STANDARD;
 146
 147 /* Tuner standards */
 148 #define MN_NTSC_PAL_BTSC        0
 149 #define MN_NTSC_PAL_A2          1
 150 #define MN_NTSC_PAL_EIAJ        2
 151 #define MN_NTSC_PAL_Mono        3
 152 #define BG_PAL_A2               4
 153 #define BG_PAL_NICAM            5
 154 #define BG_PAL_MONO             6
 155 #define I_PAL_NICAM             7
 156 #define I_PAL_NICAM_MONO        8
 157 #define DK_PAL_A2               9
 158 #define DK_PAL_NICAM            10
 159 #define DK_PAL_MONO             11
 160 #define DK_SECAM_A2DK1          12
 161 #define DK_SECAM_A2LDK3         13
 162 #define DK_SECAM_A2MONO         14
 163 #define L_SECAM_NICAM           15
 164 #define LC_SECAM_NICAM          16
 165 #define DTV6                    17
 166 #define DTV8                    18
 167 #define DTV7_8                  19
 168 #define DTV7                    20
 169 #define FM_Radio_INPUT2         21
 170 #define FM_Radio_INPUT1         22
 171
 172 static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
 173         {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
 174         {"M/N-NTSC/PAL-A2",   0x0600, 0x8020},
 175         {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
 176         {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
 177         {"B/G-PAL-A2",        0x0A00, 0x8049},
 178         {"B/G-PAL-NICAM",     0x0C04, 0x8049},
 179         {"B/G-PAL-MONO",      0x0878, 0x8059},
 180         {"I-PAL-NICAM",       0x1080, 0x8009},
 181         {"I-PAL-NICAM-MONO",  0x0E78, 0x8009},
 182         {"D/K-PAL-A2",        0x1600, 0x8009},
 183         {"D/K-PAL-NICAM",     0x0E80, 0x8009},
 184         {"D/K-PAL-MONO",      0x1478, 0x8009},
 185         {"D/K-SECAM-A2 DK1",  0x1200, 0x8009},
 186         {"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009},
 187         {"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
 188         {"L-SECAM-NICAM",     0x8E82, 0x0009},
 189         {"L'-SECAM-NICAM",    0x8E82, 0x4009},
 190         {"DTV6",              0x00C0, 0x8002},
 191         {"DTV8",              0x00C0, 0x800B},
 192         {"DTV7/8",            0x00C0, 0x801B},
 193         {"DTV7",              0x00C0, 0x8007},
 194         {"FM Radio-INPUT2",   0x9802, 0x9002},
 195         {"FM Radio-INPUT1",   0x0208, 0x9002}
 196 };
 197
 198 static int  xc5000_is_firmware_loaded(struct dvb_frontend *fe);
 199 static int  xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 200 static int  xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 201 static void xc5000_TunerReset(struct dvb_frontend *fe);
 202
 203 static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 204 {
 205         return xc5000_writeregs(priv, buf, len)
 206                 ? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS;
 207 }
 208
 209 static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 210 {
 211         return xc5000_readregs(priv, buf, len)
 212                 ? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS;
 213 }
 214
 215 static int xc_reset(struct dvb_frontend *fe)
 216 {
 217         xc5000_TunerReset(fe);
 218         return XC_RESULT_SUCCESS;
 219 }
 220
 221 static void xc_wait(int wait_ms)
 222 {
 223         msleep(wait_ms);
 224 }
 225
 226 static void xc5000_TunerReset(struct dvb_frontend *fe)
 227 {
 228         struct xc5000_priv *priv = fe->tuner_priv;
 229         int ret;
 230
 231         dprintk(1, "%s()\n", __func__);
 232
 233         if (fe->callback) {
 234                 ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
 235                                            fe->dvb->priv :
 236                                            priv->i2c_props.adap->algo_data,
 237                                            DVB_FRONTEND_COMPONENT_TUNER,
 238                                            XC5000_TUNER_RESET, 0);
 239                 if (ret)
 240                         printk(KERN_ERR "xc5000: reset failed\n");
 241         } else
 242                 printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
 243 }
 244
 245 static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
 246 {
 247         u8 buf[4];
 248         int WatchDogTimer = 5;
 249         int result;
 250
 251         buf[0] = (regAddr >> 8) & 0xFF;
 252         buf[1] = regAddr & 0xFF;
 253         buf[2] = (i2cData >> 8) & 0xFF;
 254         buf[3] = i2cData & 0xFF;
 255         result = xc_send_i2c_data(priv, buf, 4);
 256         if (result == XC_RESULT_SUCCESS) {
 257                 /* wait for busy flag to clear */
 258                 while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
 259                         buf[0] = 0;
 260                         buf[1] = XREG_BUSY;
 261
 262                         result = xc_send_i2c_data(priv, buf, 2);
 263                         if (result == XC_RESULT_SUCCESS) {
 264                                 result = xc_read_i2c_data(priv, buf, 2);
 265                                 if (result == XC_RESULT_SUCCESS) {
 266                                         if ((buf[0] == 0) && (buf[1] == 0)) {
 267                                                 /* busy flag cleared */
 268                                         break;
 269                                         } else {
 270                                                 xc_wait(100); /* wait 5 ms */
 271                                                 WatchDogTimer--;
 272                                         }
 273                                 }
 274                         }
 275                 }
 276         }
 277         if (WatchDogTimer < 0)
 278                 result = XC_RESULT_I2C_WRITE_FAILURE;
 279
 280         return result;
 281 }
 282
 283 static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData)
 284 {
 285         u8 buf[2];
 286         int result;
 287
 288         buf[0] = (regAddr >> 8) & 0xFF;
 289         buf[1] = regAddr & 0xFF;
 290         result = xc_send_i2c_data(priv, buf, 2);
 291         if (result != XC_RESULT_SUCCESS)
 292                 return result;
 293
 294         result = xc_read_i2c_data(priv, buf, 2);
 295         if (result != XC_RESULT_SUCCESS)
 296                 return result;
 297
 298         *i2cData = buf[0] * 256 + buf[1];
 299         return result;
 300 }
 301
 302 static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
 303 {
 304         struct xc5000_priv *priv = fe->tuner_priv;
 305
 306         int i, nbytes_to_send, result;
 307         unsigned int len, pos, index;
 308         u8 buf[XC_MAX_I2C_WRITE_LENGTH];
 309
 310         index=0;
 311         while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) {
 312                 len = i2c_sequence[index]* 256 + i2c_sequence[index+1];
 313                 if (len == 0x0000) {
 314                         /* RESET command */
 315                         result = xc_reset(fe);
 316                         index += 2;
 317                         if (result != XC_RESULT_SUCCESS)
 318                                 return result;
 319                 } else if (len & 0x8000) {
 320                         /* WAIT command */
 321                         xc_wait(len & 0x7FFF);
 322                         index += 2;
 323                 } else {
 324                         /* Send i2c data whilst ensuring individual transactions
 325                          * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
 326                          */
 327                         index += 2;
 328                         buf[0] = i2c_sequence[index];
 329                         buf[1] = i2c_sequence[index + 1];
 330                         pos = 2;
 331                         while (pos < len) {
 332                                 if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) {
 333                                         nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH;
 334                                 } else {
 335                                         nbytes_to_send = (len - pos + 2);
 336                                 }
 337                                 for (i=2; i<nbytes_to_send; i++) {
 338                                         buf[i] = i2c_sequence[index + pos + i - 2];
 339                                 }
 340                                 result = xc_send_i2c_data(priv, buf, nbytes_to_send);
 341
 342                                 if (result != XC_RESULT_SUCCESS)
 343                                         return result;
 344
 345                                 pos += nbytes_to_send - 2;
 346                         }
 347                         index += len;
 348                 }
 349         }
 350         return XC_RESULT_SUCCESS;
 351 }
 352
 353 static int xc_initialize(struct xc5000_priv *priv)
 354 {
 355         dprintk(1, "%s()\n", __func__);
 356         return xc_write_reg(priv, XREG_INIT, 0);
 357 }
 358
 359 static int xc_SetTVStandard(struct xc5000_priv *priv,
 360         u16 VideoMode, u16 AudioMode)
 361 {
 362         int ret;
 363         dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode);
 364         dprintk(1, "%s() Standard = %s\n",
 365                 __func__,
 366                 XC5000_Standard[priv->video_standard].Name);
 367
 368         ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode);
 369         if (ret == XC_RESULT_SUCCESS)
 370                 ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode);
 371
 372         return ret;
 373 }
 374
 375 static int xc_shutdown(struct xc5000_priv *priv)
 376 {
 377         return XC_RESULT_SUCCESS;
 378         /* Fixme: cannot bring tuner back alive once shutdown
 379          *        without reloading the driver modules.
 380          *    return xc_write_reg(priv, XREG_POWER_DOWN, 0);
 381          */
 382 }
 383
 384 static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
 385 {
 386         dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
 387                 rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
 388
 389         if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE))
 390         {
 391                 rf_mode = XC_RF_MODE_CABLE;
 392                 printk(KERN_ERR
 393                         "%s(), Invalid mode, defaulting to CABLE",
 394                         __func__);
 395         }
 396         return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
 397 }
 398
 399 static const struct dvb_tuner_ops xc5000_tuner_ops;
 400
 401 static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
 402 {
 403         u16 freq_code;
 404
 405         dprintk(1, "%s(%u)\n", __func__, freq_hz);
 406
 407         if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
 408                 (freq_hz < xc5000_tuner_ops.info.frequency_min))
 409                 return XC_RESULT_OUT_OF_RANGE;
 410
 411         freq_code = (u16)(freq_hz / 15625);
 412
 413         return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
 414 }
 415
 416
 417 static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
 418 {
 419         u32 freq_code = (freq_khz * 1024)/1000;
 420         dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
 421                 __func__, freq_khz, freq_code);
 422
 423         return xc_write_reg(priv, XREG_IF_OUT, freq_code);
 424 }
 425
 426
 427 static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope)
 428 {
 429         return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope);
 430 }
 431
 432 static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
 433 {
 434         int result;
 435         u16 regData;
 436         u32 tmp;
 437
 438         result = xc_read_reg(priv, XREG_FREQ_ERROR, &regData);
 439         if (result)
 440                 return result;
 441
 442         tmp = (u32)regData;
 443         (*freq_error_hz) = (tmp * 15625) / 1000;
 444         return result;
 445 }
 446
 447 static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
 448 {
 449         return xc_read_reg(priv, XREG_LOCK, lock_status);
 450 }
 451
 452 static int xc_get_version(struct xc5000_priv *priv,
 453         u8 *hw_majorversion, u8 *hw_minorversion,
 454         u8 *fw_majorversion, u8 *fw_minorversion)
 455 {
 456         u16 data;
 457         int result;
 458
 459         result = xc_read_reg(priv, XREG_VERSION, &data);
 460         if (result)
 461                 return result;
 462
 463         (*hw_majorversion) = (data >> 12) & 0x0F;
 464         (*hw_minorversion) = (data >>  8) & 0x0F;
 465         (*fw_majorversion) = (data >>  4) & 0x0F;
 466         (*fw_minorversion) = data & 0x0F;
 467
 468         return 0;
 469 }
 470
 471 static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
 472 {
 473         u16 regData;
 474         int result;
 475
 476         result = xc_read_reg(priv, XREG_HSYNC_FREQ, &regData);
 477         if (result)
 478                 return result;
 479
 480         (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
 481         return result;
 482 }
 483
 484 static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
 485 {
 486         return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines);
 487 }
 488
 489 static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
 490 {
 491         return xc_read_reg(priv, XREG_QUALITY, quality);
 492 }
 493
 494 static u16 WaitForLock(struct xc5000_priv *priv)
 495 {
 496         u16 lockState = 0;
 497         int watchDogCount = 40;
 498
 499         while ((lockState == 0) && (watchDogCount > 0)) {
 500                 xc_get_lock_status(priv, &lockState);
 501                 if (lockState != 1) {
 502                         xc_wait(5);
 503                         watchDogCount--;
 504                 }
 505         }
 506         return lockState;
 507 }
 508
 509 static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz)
 510 {
 511         int found = 0;
 512
 513         dprintk(1, "%s(%u)\n", __func__, freq_hz);
 514
 515         if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
 516                 return 0;
 517
 518         if (WaitForLock(priv) == 1)
 519                 found = 1;
 520
 521         return found;
 522 }
 523
 524 static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
 525 {
 526         u8 buf[2] = { reg >> 8, reg & 0xff };
 527         u8 bval[2] = { 0, 0 };
 528         struct i2c_msg msg[2] = {
 529                 { .addr = priv->i2c_props.addr,
 530                         .flags = 0, .buf = &buf[0], .len = 2 },
 531                 { .addr = priv->i2c_props.addr,
 532                         .flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
 533         };
 534
 535         if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
 536                 printk(KERN_WARNING "xc5000: I2C read failed\n");
 537                 return -EREMOTEIO;
 538         }
 539
 540         *val = (bval[0] << 8) | bval[1];
 541         return 0;
 542 }
 543
 544 static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 545 {
 546         struct i2c_msg msg = { .addr = priv->i2c_props.addr,
 547                 .flags = 0, .buf = buf, .len = len };
 548
 549         if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
 550                 printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n",
 551                         (int)len);
 552                 return -EREMOTEIO;
 553         }
 554         return 0;
 555 }
 556
 557 static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 558 {
 559         struct i2c_msg msg = { .addr = priv->i2c_props.addr,
 560                 .flags = I2C_M_RD, .buf = buf, .len = len };
 561
 562         if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
 563                 printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len);
 564                 return -EREMOTEIO;
 565         }
 566         return 0;
 567 }
 568
 569 static int xc5000_fwupload(struct dvb_frontend* fe)
 570 {
 571         struct xc5000_priv *priv = fe->tuner_priv;
 572         const struct firmware *fw;
 573         int ret;
 574
 575         /* request the firmware, this will block and timeout */
 576         printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
 577                 XC5000_DEFAULT_FIRMWARE);
 578
 579         ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c_props.adap->dev);
 580         if (ret) {
 581                 printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
 582                 ret = XC_RESULT_RESET_FAILURE;
 583                 goto out;
 584         } else {
 585                 printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n",
 586                        fw->size);
 587                 ret = XC_RESULT_SUCCESS;
 588         }
 589
 590         if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) {
 591                 printk(KERN_ERR "xc5000: firmware incorrect size\n");
 592                 ret = XC_RESULT_RESET_FAILURE;
 593         } else {
 594                 printk(KERN_INFO "xc5000: firmware upload\n");
 595                 ret = xc_load_i2c_sequence(fe,  fw->data );
 596         }
 597
 598 out:
 599         release_firmware(fw);
 600         return ret;
 601 }
 602
 603 static void xc_debug_dump(struct xc5000_priv *priv)
 604 {
 605         u16 adc_envelope;
 606         u32 freq_error_hz = 0;
 607         u16 lock_status;
 608         u32 hsync_freq_hz = 0;
 609         u16 frame_lines;
 610         u16 quality;
 611         u8 hw_majorversion = 0, hw_minorversion = 0;
 612         u8 fw_majorversion = 0, fw_minorversion = 0;
 613
 614         /* Wait for stats to stabilize.
 615          * Frame Lines needs two frame times after initial lock
 616          * before it is valid.
 617          */
 618         xc_wait(100);
 619
 620         xc_get_ADC_Envelope(priv,  &adc_envelope);
 621         dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
 622
 623         xc_get_frequency_error(priv, &freq_error_hz);
 624         dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
 625
 626         xc_get_lock_status(priv,  &lock_status);
 627         dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
 628                 lock_status);
 629
 630         xc_get_version(priv,  &hw_majorversion, &hw_minorversion,
 631                 &fw_majorversion, &fw_minorversion);
 632         dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
 633                 hw_majorversion, hw_minorversion,
 634                 fw_majorversion, fw_minorversion);
 635
 636         xc_get_hsync_freq(priv,  &hsync_freq_hz);
 637         dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
 638
 639         xc_get_frame_lines(priv,  &frame_lines);
 640         dprintk(1, "*** Frame lines = %d\n", frame_lines);
 641
 642         xc_get_quality(priv,  &quality);
 643         dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality);
 644 }
 645
 646 static int xc5000_set_params(struct dvb_frontend *fe,
 647         struct dvb_frontend_parameters *params)
 648 {
 649         struct xc5000_priv *priv = fe->tuner_priv;
 650         int ret;
 651
 652         dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
 653
 654         switch(params->u.vsb.modulation) {
 655         case VSB_8:
 656         case VSB_16:
 657                 dprintk(1, "%s() VSB modulation\n", __func__);
 658                 priv->rf_mode = XC_RF_MODE_AIR;
 659                 priv->freq_hz = params->frequency - 1750000;
 660                 priv->bandwidth = BANDWIDTH_6_MHZ;
 661                 priv->video_standard = DTV6;
 662                 break;
 663         case QAM_64:
 664         case QAM_256:
 665         case QAM_AUTO:
 666                 dprintk(1, "%s() QAM modulation\n", __func__);
 667                 priv->rf_mode = XC_RF_MODE_CABLE;
 668                 priv->freq_hz = params->frequency - 1750000;
 669                 priv->bandwidth = BANDWIDTH_6_MHZ;
 670                 priv->video_standard = DTV6;
 671                 break;
 672         default:
 673                 return -EINVAL;
 674         }
 675
 676         dprintk(1, "%s() frequency=%d (compensated)\n",
 677                 __func__, priv->freq_hz);
 678
 679         ret = xc_SetSignalSource(priv, priv->rf_mode);
 680         if (ret != XC_RESULT_SUCCESS) {
 681                 printk(KERN_ERR
 682                         "xc5000: xc_SetSignalSource(%d) failed\n",
 683                         priv->rf_mode);
 684                 return -EREMOTEIO;
 685         }
 686
 687         ret = xc_SetTVStandard(priv,
 688                 XC5000_Standard[priv->video_standard].VideoMode,
 689                 XC5000_Standard[priv->video_standard].AudioMode);
 690         if (ret != XC_RESULT_SUCCESS) {
 691                 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
 692                 return -EREMOTEIO;
 693         }
 694
 695         ret = xc_set_IF_frequency(priv, priv->if_khz);
 696         if (ret != XC_RESULT_SUCCESS) {
 697                 printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
 698                        priv->if_khz);
 699                 return -EIO;
 700         }
 701
 702         xc_tune_channel(priv, priv->freq_hz);
 703
 704         if (debug)
 705                 xc_debug_dump(priv);
 706
 707         return 0;
 708 }
 709
 710 static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
 711 {
 712         struct xc5000_priv *priv = fe->tuner_priv;
 713         int ret;
 714         u16 id;
 715
 716         ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
 717         if (ret == XC_RESULT_SUCCESS) {
 718                 if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
 719                         ret = XC_RESULT_RESET_FAILURE;
 720                 else
 721                         ret = XC_RESULT_SUCCESS;
 722         }
 723
 724         dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
 725                 ret == XC_RESULT_SUCCESS ? "True" : "False", id);
 726         return ret;
 727 }
 728
 729 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
 730
 731 static int xc5000_set_analog_params(struct dvb_frontend *fe,
 732         struct analog_parameters *params)
 733 {
 734         struct xc5000_priv *priv = fe->tuner_priv;
 735         int ret;
 736
 737         if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
 738                 xc_load_fw_and_init_tuner(fe);
 739
 740         dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
 741                 __func__, params->frequency);
 742
 743         priv->rf_mode = XC_RF_MODE_CABLE; /* Fix me: it could be air. */
 744
 745         /* params->frequency is in units of 62.5khz */
 746         priv->freq_hz = params->frequency * 62500;
 747
 748         /* FIX ME: Some video standards may have several possible audio
 749                    standards. We simply default to one of them here.
 750          */
 751         if(params->std & V4L2_STD_MN) {
 752                 /* default to BTSC audio standard */
 753                 priv->video_standard = MN_NTSC_PAL_BTSC;
 754                 goto tune_channel;
 755         }
 756
 757         if(params->std & V4L2_STD_PAL_BG) {
 758                 /* default to NICAM audio standard */
 759                 priv->video_standard = BG_PAL_NICAM;
 760                 goto tune_channel;
 761         }
 762
 763         if(params->std & V4L2_STD_PAL_I) {
 764                 /* default to NICAM audio standard */
 765                 priv->video_standard = I_PAL_NICAM;
 766                 goto tune_channel;
 767         }
 768
 769         if(params->std & V4L2_STD_PAL_DK) {
 770                 /* default to NICAM audio standard */
 771                 priv->video_standard = DK_PAL_NICAM;
 772                 goto tune_channel;
 773         }
 774
 775         if(params->std & V4L2_STD_SECAM_DK) {
 776                 /* default to A2 DK1 audio standard */
 777                 priv->video_standard = DK_SECAM_A2DK1;
 778                 goto tune_channel;
 779         }
 780
 781         if(params->std & V4L2_STD_SECAM_L) {
 782                 priv->video_standard = L_SECAM_NICAM;
 783                 goto tune_channel;
 784         }
 785
 786         if(params->std & V4L2_STD_SECAM_LC) {
 787                 priv->video_standard = LC_SECAM_NICAM;
 788                 goto tune_channel;
 789         }
 790
 791 tune_channel:
 792         ret = xc_SetSignalSource(priv, priv->rf_mode);
 793         if (ret != XC_RESULT_SUCCESS) {
 794         printk(KERN_ERR
 795                         "xc5000: xc_SetSignalSource(%d) failed\n",
 796                         priv->rf_mode);
 797                 return -EREMOTEIO;
 798         }
 799
 800         ret = xc_SetTVStandard(priv,
 801                 XC5000_Standard[priv->video_standard].VideoMode,
 802                 XC5000_Standard[priv->video_standard].AudioMode);
 803         if (ret != XC_RESULT_SUCCESS) {
 804                 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
 805                 return -EREMOTEIO;
 806         }
 807
 808         xc_tune_channel(priv, priv->freq_hz);
 809
 810         if (debug)
 811                 xc_debug_dump(priv);
 812
 813         return 0;
 814 }
 815
 816 static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
 817 {
 818         struct xc5000_priv *priv = fe->tuner_priv;
 819         dprintk(1, "%s()\n", __func__);
 820         *freq = priv->freq_hz;
 821         return 0;
 822 }
 823
 824 static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
 825 {
 826         struct xc5000_priv *priv = fe->tuner_priv;
 827         dprintk(1, "%s()\n", __func__);
 828
 829         *bw = priv->bandwidth;
 830         return 0;
 831 }
 832
 833 static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
 834 {
 835         struct xc5000_priv *priv = fe->tuner_priv;
 836         u16 lock_status = 0;
 837
 838         xc_get_lock_status(priv, &lock_status);
 839
 840         dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
 841
 842         *status = lock_status;
 843
 844         return 0;
 845 }
 846
 847 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
 848 {
 849         struct xc5000_priv *priv = fe->tuner_priv;
 850         int ret = 0;
 851
 852         if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
 853                 ret = xc5000_fwupload(fe);
 854                 if (ret != XC_RESULT_SUCCESS)
 855                         return ret;
 856         }
 857
 858         /* Start the tuner self-calibration process */
 859         ret |= xc_initialize(priv);
 860
 861         /* Wait for calibration to complete.
 862          * We could continue but XC5000 will clock stretch subsequent
 863          * I2C transactions until calibration is complete.  This way we
 864          * don't have to rely on clock stretching working.
 865          */
 866         xc_wait( 100 );
 867
 868         /* Default to "CABLE" mode */
 869         ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
 870
 871         return ret;
 872 }
 873
 874 static int xc5000_sleep(struct dvb_frontend *fe)
 875 {
 876         struct xc5000_priv *priv = fe->tuner_priv;
 877         int ret;
 878
 879         dprintk(1, "%s()\n", __func__);
 880
 881         /* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized
 882          * once shutdown without reloading the driver. Maybe I am not
 883          * doing something right.
 884          *
 885          */
 886
 887         ret = xc_shutdown(priv);
 888         if(ret != XC_RESULT_SUCCESS) {
 889                 printk(KERN_ERR
 890                         "xc5000: %s() unable to shutdown tuner\n",
 891                         __func__);
 892                 return -EREMOTEIO;
 893         }
 894         else {
 895                 return XC_RESULT_SUCCESS;
 896         }
 897 }
 898
 899 static int xc5000_init(struct dvb_frontend *fe)
 900 {
 901         struct xc5000_priv *priv = fe->tuner_priv;
 902         dprintk(1, "%s()\n", __func__);
 903
 904         if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) {
 905                 printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
 906                 return -EREMOTEIO;
 907         }
 908
 909         if (debug)
 910                 xc_debug_dump(priv);
 911
 912         return 0;
 913 }
 914
 915 static int xc5000_release(struct dvb_frontend *fe)
 916 {
 917         struct xc5000_priv *priv = fe->tuner_priv;
 918
 919         dprintk(1, "%s()\n", __func__);
 920
 921         mutex_lock(&xc5000_list_mutex);
 922
 923         if (priv)
 924                 hybrid_tuner_release_state(priv);
 925
 926         mutex_unlock(&xc5000_list_mutex);
 927
 928         fe->tuner_priv = NULL;
 929
 930         return 0;
 931 }
 932
 933 static const struct dvb_tuner_ops xc5000_tuner_ops = {
 934         .info = {
 935                 .name           = "Xceive XC5000",
 936                 .frequency_min  =    1000000,
 937                 .frequency_max  = 1023000000,
 938                 .frequency_step =      50000,
 939         },
 940
 941         .release           = xc5000_release,
 942         .init              = xc5000_init,
 943         .sleep             = xc5000_sleep,
 944
 945         .set_params        = xc5000_set_params,
 946         .set_analog_params = xc5000_set_analog_params,
 947         .get_frequency     = xc5000_get_frequency,
 948         .get_bandwidth     = xc5000_get_bandwidth,
 949         .get_status        = xc5000_get_status
 950 };
 951
 952 struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 953                                    struct i2c_adapter *i2c,
 954                                    struct xc5000_config *cfg)
 955 {
 956         struct xc5000_priv *priv = NULL;
 957         int instance;
 958         u16 id = 0;
 959
 960         dprintk(1, "%s(%d-%04x)\n", __func__,
 961                 i2c ? i2c_adapter_id(i2c) : -1,
 962                 cfg ? cfg->i2c_address : -1);
 963
 964         mutex_lock(&xc5000_list_mutex);
 965
 966         instance = hybrid_tuner_request_state(struct xc5000_priv, priv,
 967                                               hybrid_tuner_instance_list,
 968                                               i2c, cfg->i2c_address, "xc5000");
 969         switch (instance) {
 970         case 0:
 971                 goto fail;
 972                 break;
 973         case 1:
 974                 /* new tuner instance */
 975                 priv->bandwidth = BANDWIDTH_6_MHZ;
 976                 priv->if_khz = cfg->if_khz;
 977
 978                 fe->tuner_priv = priv;
 979                 break;
 980         default:
 981                 /* existing tuner instance */
 982                 fe->tuner_priv = priv;
 983                 break;
 984         }
 985
 986         /* Check if firmware has been loaded. It is possible that another
 987            instance of the driver has loaded the firmware.
 988          */
 989         if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
 990                 goto fail;
 991
 992         switch(id) {
 993         case XC_PRODUCT_ID_FW_LOADED:
 994                 printk(KERN_INFO
 995                         "xc5000: Successfully identified at address 0x%02x\n",
 996                         cfg->i2c_address);
 997                 printk(KERN_INFO
 998                         "xc5000: Firmware has been loaded previously\n");
 999                 break;
1000         case XC_PRODUCT_ID_FW_NOT_LOADED:
1001                 printk(KERN_INFO
1002                         "xc5000: Successfully identified at address 0x%02x\n",
1003                         cfg->i2c_address);
1004                 printk(KERN_INFO
1005                         "xc5000: Firmware has not been loaded previously\n");
1006                 break;
1007         default:
1008                 printk(KERN_ERR
1009                         "xc5000: Device not found at addr 0x%02x (0x%x)\n",
1010                         cfg->i2c_address, id);
1011                 goto fail;
1012         }
1013
1014         mutex_unlock(&xc5000_list_mutex);
1015
1016         memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
1017                 sizeof(struct dvb_tuner_ops));
1018
1019         if (xc5000_load_fw_on_attach)
1020                 xc5000_init(fe);
1021
1022         return fe;
1023 fail:
1024         mutex_unlock(&xc5000_list_mutex);
1025
1026         xc5000_release(fe);
1027         return NULL;
1028 }
1029 EXPORT_SYMBOL(xc5000_attach);
1030
1031 MODULE_AUTHOR("Steven Toth");
1032 MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
1033 MODULE_LICENSE("GPL");