Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
[linux-2.6] / arch / powerpc / boot / dts / mpc8377_rdb.dts
1 /*
2  * MPC8377E RDB Device Tree Source
3  *
4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
11
12 /dts-v1/;
13
14 / {
15         compatible = "fsl,mpc8377rdb";
16         #address-cells = <1>;
17         #size-cells = <1>;
18
19         aliases {
20                 ethernet0 = &enet0;
21                 ethernet1 = &enet1;
22                 serial0 = &serial0;
23                 serial1 = &serial1;
24                 pci0 = &pci0;
25         };
26
27         cpus {
28                 #address-cells = <1>;
29                 #size-cells = <0>;
30
31                 PowerPC,8377@0 {
32                         device_type = "cpu";
33                         reg = <0x0>;
34                         d-cache-line-size = <32>;
35                         i-cache-line-size = <32>;
36                         d-cache-size = <32768>;
37                         i-cache-size = <32768>;
38                         timebase-frequency = <0>;
39                         bus-frequency = <0>;
40                         clock-frequency = <0>;
41                 };
42         };
43
44         memory {
45                 device_type = "memory";
46                 reg = <0x00000000 0x10000000>;  // 256MB at 0
47         };
48
49         localbus@e0005000 {
50                 #address-cells = <2>;
51                 #size-cells = <1>;
52                 compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
53                 reg = <0xe0005000 0x1000>;
54                 interrupts = <77 0x8>;
55                 interrupt-parent = <&ipic>;
56
57                 // CS0 and CS1 are swapped when
58                 // booting from nand, but the
59                 // addresses are the same.
60                 ranges = <0x0 0x0 0xfe000000 0x00800000
61                           0x1 0x0 0xe0600000 0x00008000
62                           0x2 0x0 0xf0000000 0x00020000
63                           0x3 0x0 0xfa000000 0x00008000>;
64
65                 flash@0,0 {
66                         #address-cells = <1>;
67                         #size-cells = <1>;
68                         compatible = "cfi-flash";
69                         reg = <0x0 0x0 0x800000>;
70                         bank-width = <2>;
71                         device-width = <1>;
72                 };
73
74                 nand@1,0 {
75                         #address-cells = <1>;
76                         #size-cells = <1>;
77                         compatible = "fsl,mpc8377-fcm-nand",
78                                      "fsl,elbc-fcm-nand";
79                         reg = <0x1 0x0 0x8000>;
80
81                         u-boot@0 {
82                                 reg = <0x0 0x100000>;
83                                 read-only;
84                         };
85
86                         kernel@100000 {
87                                 reg = <0x100000 0x300000>;
88                         };
89                         fs@400000 {
90                                 reg = <0x400000 0x1c00000>;
91                         };
92                 };
93         };
94
95         immr@e0000000 {
96                 #address-cells = <1>;
97                 #size-cells = <1>;
98                 device_type = "soc";
99                 compatible = "simple-bus";
100                 ranges = <0x0 0xe0000000 0x00100000>;
101                 reg = <0xe0000000 0x00000200>;
102                 bus-frequency = <0>;
103
104                 wdt@200 {
105                         device_type = "watchdog";
106                         compatible = "mpc83xx_wdt";
107                         reg = <0x200 0x100>;
108                 };
109
110                 i2c@3000 {
111                         #address-cells = <1>;
112                         #size-cells = <0>;
113                         cell-index = <0>;
114                         compatible = "fsl-i2c";
115                         reg = <0x3000 0x100>;
116                         interrupts = <14 0x8>;
117                         interrupt-parent = <&ipic>;
118                         dfsrr;
119                         rtc@68 {
120                                 device_type = "rtc";
121                                 compatible = "dallas,ds1339";
122                                 reg = <0x68>;
123                         };
124                 };
125
126                 i2c@3100 {
127                         #address-cells = <1>;
128                         #size-cells = <0>;
129                         cell-index = <1>;
130                         compatible = "fsl-i2c";
131                         reg = <0x3100 0x100>;
132                         interrupts = <15 0x8>;
133                         interrupt-parent = <&ipic>;
134                         dfsrr;
135                 };
136
137                 spi@7000 {
138                         cell-index = <0>;
139                         compatible = "fsl,spi";
140                         reg = <0x7000 0x1000>;
141                         interrupts = <16 0x8>;
142                         interrupt-parent = <&ipic>;
143                         mode = "cpu";
144                 };
145
146                 dma@82a8 {
147                         #address-cells = <1>;
148                         #size-cells = <1>;
149                         compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
150                         reg = <0x82a8 4>;
151                         ranges = <0 0x8100 0x1a8>;
152                         interrupt-parent = <&ipic>;
153                         interrupts = <71 8>;
154                         cell-index = <0>;
155                         dma-channel@0 {
156                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
157                                 reg = <0 0x80>;
158                                 cell-index = <0>;
159                                 interrupt-parent = <&ipic>;
160                                 interrupts = <71 8>;
161                         };
162                         dma-channel@80 {
163                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
164                                 reg = <0x80 0x80>;
165                                 cell-index = <1>;
166                                 interrupt-parent = <&ipic>;
167                                 interrupts = <71 8>;
168                         };
169                         dma-channel@100 {
170                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
171                                 reg = <0x100 0x80>;
172                                 cell-index = <2>;
173                                 interrupt-parent = <&ipic>;
174                                 interrupts = <71 8>;
175                         };
176                         dma-channel@180 {
177                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
178                                 reg = <0x180 0x28>;
179                                 cell-index = <3>;
180                                 interrupt-parent = <&ipic>;
181                                 interrupts = <71 8>;
182                         };
183                 };
184
185                 usb@23000 {
186                         compatible = "fsl-usb2-dr";
187                         reg = <0x23000 0x1000>;
188                         #address-cells = <1>;
189                         #size-cells = <0>;
190                         interrupt-parent = <&ipic>;
191                         interrupts = <38 0x8>;
192                         phy_type = "ulpi";
193                 };
194
195                 mdio@24520 {
196                         #address-cells = <1>;
197                         #size-cells = <0>;
198                         compatible = "fsl,gianfar-mdio";
199                         reg = <0x24520 0x20>;
200                         phy2: ethernet-phy@2 {
201                                 interrupt-parent = <&ipic>;
202                                 interrupts = <17 0x8>;
203                                 reg = <0x2>;
204                                 device_type = "ethernet-phy";
205                         };
206                 };
207
208                 enet0: ethernet@24000 {
209                         cell-index = <0>;
210                         device_type = "network";
211                         model = "eTSEC";
212                         compatible = "gianfar";
213                         reg = <0x24000 0x1000>;
214                         local-mac-address = [ 00 00 00 00 00 00 ];
215                         interrupts = <32 0x8 33 0x8 34 0x8>;
216                         phy-connection-type = "mii";
217                         interrupt-parent = <&ipic>;
218                         phy-handle = <&phy2>;
219                 };
220
221                 enet1: ethernet@25000 {
222                         cell-index = <1>;
223                         device_type = "network";
224                         model = "eTSEC";
225                         compatible = "gianfar";
226                         reg = <0x25000 0x1000>;
227                         local-mac-address = [ 00 00 00 00 00 00 ];
228                         interrupts = <35 0x8 36 0x8 37 0x8>;
229                         phy-connection-type = "mii";
230                         interrupt-parent = <&ipic>;
231                         fixed-link = <1 1 1000 0 0>;
232                 };
233
234                 serial0: serial@4500 {
235                         cell-index = <0>;
236                         device_type = "serial";
237                         compatible = "ns16550";
238                         reg = <0x4500 0x100>;
239                         clock-frequency = <0>;
240                         interrupts = <9 0x8>;
241                         interrupt-parent = <&ipic>;
242                 };
243
244                 serial1: serial@4600 {
245                         cell-index = <1>;
246                         device_type = "serial";
247                         compatible = "ns16550";
248                         reg = <0x4600 0x100>;
249                         clock-frequency = <0>;
250                         interrupts = <10 0x8>;
251                         interrupt-parent = <&ipic>;
252                 };
253
254                 crypto@30000 {
255                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
256                                      "fsl,sec2.1", "fsl,sec2.0";
257                         reg = <0x30000 0x10000>;
258                         interrupts = <11 0x8>;
259                         interrupt-parent = <&ipic>;
260                         fsl,num-channels = <4>;
261                         fsl,channel-fifo-len = <24>;
262                         fsl,exec-units-mask = <0x9fe>;
263                         fsl,descriptor-types-mask = <0x3ab0ebf>;
264                 };
265
266                 sata@18000 {
267                         compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
268                         reg = <0x18000 0x1000>;
269                         interrupts = <44 0x8>;
270                         interrupt-parent = <&ipic>;
271                 };
272
273                 sata@19000 {
274                         compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
275                         reg = <0x19000 0x1000>;
276                         interrupts = <45 0x8>;
277                         interrupt-parent = <&ipic>;
278                 };
279
280                 /* IPIC
281                  * interrupts cell = <intr #, sense>
282                  * sense values match linux IORESOURCE_IRQ_* defines:
283                  * sense == 8: Level, low assertion
284                  * sense == 2: Edge, high-to-low change
285                  */
286                 ipic: interrupt-controller@700 {
287                         compatible = "fsl,ipic";
288                         interrupt-controller;
289                         #address-cells = <0>;
290                         #interrupt-cells = <2>;
291                         reg = <0x700 0x100>;
292                 };
293         };
294
295         pci0: pci@e0008500 {
296                 interrupt-map-mask = <0xf800 0 0 7>;
297                 interrupt-map = <
298                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
299
300                                 /* IDSEL AD14 IRQ6 inta */
301                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
302
303                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
304                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
305                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
306                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
307
308                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
309                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
310                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
311                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
312                 interrupt-parent = <&ipic>;
313                 interrupts = <66 0x8>;
314                 bus-range = <0 0>;
315                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
316                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
317                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
318                 clock-frequency = <66666666>;
319                 #interrupt-cells = <1>;
320                 #size-cells = <2>;
321                 #address-cells = <3>;
322                 reg = <0xe0008500 0x100         /* internal registers */
323                        0xe0008300 0x8>;         /* config space access registers */
324                 compatible = "fsl,mpc8349-pci";
325                 device_type = "pci";
326         };
327 };