1 /* $Id: nj_u.c,v 2.14.2.3 2004/01/13 14:31:26 keil Exp $
3 * This software may be used and distributed according to the terms
4 * of the GNU General Public License, incorporated herein by reference.
8 #include <linux/init.h>
12 #include <linux/pci.h>
13 #include <linux/interrupt.h>
14 #include <linux/ppp_defs.h>
17 static const char *NETjet_U_revision = "$Revision: 2.14.2.3 $";
19 static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off)
24 static void dummywr(struct IsdnCardState *cs, int chan, u_char off, u_char value)
29 netjet_u_interrupt(int intno, void *dev_id)
31 struct IsdnCardState *cs = dev_id;
35 spin_lock_irqsave(&cs->lock, flags);
36 if (!((sval = bytein(cs->hw.njet.base + NETJET_IRQSTAT1)) &
38 val = NETjet_ReadIC(cs, ICC_ISTA);
39 if (cs->debug & L1_DEB_ISAC)
40 debugl1(cs, "tiger: i1 %x %x", sval, val);
42 icc_interrupt(cs, val);
43 NETjet_WriteIC(cs, ICC_MASK, 0xFF);
44 NETjet_WriteIC(cs, ICC_MASK, 0x0);
47 /* start new code 13/07/00 GE */
48 /* set bits in sval to indicate which page is free */
49 if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
50 inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
51 /* the 2nd write page is free */
53 else /* the 1st write page is free */
55 if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
56 inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
57 /* the 2nd read page is free */
59 else /* the 1st read page is free */
61 if (sval != cs->hw.njet.last_is0) /* we have a DMA interrupt */
63 if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
64 spin_unlock_irqrestore(&cs->lock, flags);
67 cs->hw.njet.irqstat0 = sval;
68 if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) !=
69 (cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
70 /* we have a read dma int */
72 if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
73 (cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
74 /* we have a write dma int */
76 /* end new code 13/07/00 GE */
77 test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
79 spin_unlock_irqrestore(&cs->lock, flags);
84 reset_netjet_u(struct IsdnCardState *cs)
86 cs->hw.njet.ctrl_reg = 0xff; /* Reset On */
87 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
89 cs->hw.njet.ctrl_reg = 0x40; /* Reset Off and status read clear */
90 /* now edge triggered for TJ320 GE 13/07/00 */
91 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
93 cs->hw.njet.auxd = 0xC0;
94 cs->hw.njet.dmactrl = 0;
95 byteout(cs->hw.njet.auxa, 0);
96 byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
97 byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
98 byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
102 NETjet_U_card_msg(struct IsdnCardState *cs, int mt, void *arg)
108 spin_lock_irqsave(&cs->lock, flags);
110 spin_unlock_irqrestore(&cs->lock, flags);
113 release_io_netjet(cs);
116 spin_lock_irqsave(&cs->lock, flags);
119 clear_pending_icc_ints(cs);
121 /* Reenable all IRQ */
122 cs->writeisac(cs, ICC_MASK, 0);
123 spin_unlock_irqrestore(&cs->lock, flags);
131 static struct pci_dev *dev_netjet __devinitdata = NULL;
134 setup_netjet_u(struct IsdnCard *card)
137 struct IsdnCardState *cs = card->cs;
142 #error "not running on big endian machines now"
144 strcpy(tmp, NETjet_U_revision);
145 printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp));
146 if (cs->typ != ISDN_CTYPE_NETJET_U)
148 test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
154 if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
155 PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
156 if (pci_enable_device(dev_netjet))
158 pci_set_master(dev_netjet);
159 cs->irq = dev_netjet->irq;
161 printk(KERN_WARNING "NETspider-U: No IRQ for PCI card found\n");
164 cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
165 if (!cs->hw.njet.base) {
166 printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n");
170 printk(KERN_WARNING "NETspider-U: No PCI card found\n");
174 cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
175 cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
178 cs->hw.njet.ctrl_reg = 0xff; /* Reset On */
179 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
182 cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */
183 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
186 cs->hw.njet.auxd = 0xC0;
187 cs->hw.njet.dmactrl = 0;
189 byteout(cs->hw.njet.auxa, 0);
190 byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
191 byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
192 byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
194 switch ( ( ( NETjet_ReadIC( cs, ICC_RBCH ) >> 5 ) & 3 ) )
200 printk( KERN_WARNING "NETspider-U: NETjet-S PCI card found\n" );
204 printk( KERN_WARNING "NETspider-U: No PCI card found\n" );
211 printk(KERN_WARNING "NETspider-U: NO_PCI_BIOS\n");
212 printk(KERN_WARNING "NETspider-U: unable to config NETspider-U PCI\n");
215 #endif /* CONFIG_PCI */
220 "NETspider-U: PCI card configured at %#lx IRQ %d\n",
221 cs->hw.njet.base, cs->irq);
222 if (!request_region(cs->hw.njet.base, bytecnt, "netspider-u isdn")) {
224 "HiSax: %s config port %#lx-%#lx already in use\n",
227 cs->hw.njet.base + bytecnt);
231 cs->readisac = &NETjet_ReadIC;
232 cs->writeisac = &NETjet_WriteIC;
233 cs->readisacfifo = &NETjet_ReadICfifo;
234 cs->writeisacfifo = &NETjet_WriteICfifo;
235 cs->BC_Read_Reg = &dummyrr;
236 cs->BC_Write_Reg = &dummywr;
237 cs->BC_Send_Data = &netjet_fill_dma;
238 cs->cardmsg = &NETjet_U_card_msg;
239 cs->irq_func = &netjet_u_interrupt;
240 cs->irq_flags |= IRQF_SHARED;
241 ICCVersion(cs, "NETspider-U:");