git.oblomov.eu Git - linux-2.6/blob - drivers/net/ixp2000/ixp2400_tx.uc

   1 /*
   2  * TX ucode for the Intel IXP2400 in POS-PHY mode.
   3  * Copyright (C) 2004, 2005 Lennert Buytenhek
   4  * Dedicated to Marija Kulikova.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * Assumptions made in this code:
  12  * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
  13  *   only one TBUF partition is used.  This includes, for example,
  14  *   1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
  15  *   is not an exhaustive list.)
  16  * - The TBUF uses 64-byte mpackets.
  17  * - TX descriptors reside in SRAM, and have the following format:
  18  *      struct tx_desc
  19  *      {
  20  *      // to uengine
  21  *              u32     buf_phys_addr;
  22  *              u32     pkt_length;
  23  *              u32     channel;
  24  *      };
  25  * - Packet data resides in DRAM.
  26  * - Packet buffer addresses are 8-byte aligned.
  27  * - Scratch ring 2 is tx_pending.
  28  * - Scratch ring 3 is tx_done, and has status condition 'full'.
  29  * - This code is run on all eight threads of the microengine it runs on.
  30  */
  31
  32 #define TX_SEQUENCE_0           0x0060
  33 #define TBUF_CTRL               0x1800
  34
  35 #define PARTITION_SIZE          128
  36 #define PARTITION_THRESH        96
  37
  38
  39         .sig volatile sig1
  40         .sig volatile sig2
  41         .sig volatile sig3
  42
  43         .reg @old_tx_seq_0
  44         .reg @mpkts_in_flight
  45         .reg @next_tbuf_mpacket
  46
  47         .reg @buffer_handle
  48         .reg @buffer_start
  49         .reg @packet_length
  50         .reg @channel
  51         .reg @packet_offset
  52
  53         .reg zero
  54
  55         immed[zero, 0]
  56
  57         /*
  58          * Skip context 0 initialisation?
  59          */
  60         .begin
  61                 br!=ctx[0, mpacket_tx_loop#]
  62         .end
  63
  64         /*
  65          * Wait until all pending TBUF elements have been transmitted.
  66          */
  67         .begin
  68                 .reg read $tx
  69                 .sig zzz
  70
  71         loop_empty#:
  72                 msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
  73                 alu_shf[--, --, b, $tx, >>31]
  74                 beq[loop_empty#]
  75
  76                 alu[@old_tx_seq_0, --, b, $tx]
  77         .end
  78
  79         immed[@mpkts_in_flight, 0]
  80         alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)]
  81
  82         immed[@buffer_handle, 0]
  83
  84         /*
  85          * Initialise signal pipeline.
  86          */
  87         .begin
  88                 local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
  89                 .set_sig sig1
  90
  91                 local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
  92                 .set_sig sig2
  93
  94                 local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
  95                 .set_sig sig3
  96         .end
  97
  98 mpacket_tx_loop#:
  99         .begin
 100                 .reg tbuf_element_index
 101                 .reg buffer_handle
 102                 .reg sop_eop
 103                 .reg packet_data
 104                 .reg channel
 105                 .reg mpacket_size
 106
 107                 /*
 108                  * If there is no packet currently being transmitted,
 109                  * dequeue the next TX descriptor, and fetch the buffer
 110                  * address, packet length and destination channel number.
 111                  */
 112                 .begin
 113                         .reg read $stemp $stemp2 $stemp3
 114                         .xfer_order $stemp $stemp2 $stemp3
 115                         .sig zzz
 116
 117                         ctx_arb[sig1]
 118
 119                         alu[--, --, b, @buffer_handle]
 120                         bne[already_got_packet#]
 121
 122                 tx_nobufs#:
 123                         scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz]
 124                         alu[@buffer_handle, --, b, $stemp]
 125                         beq[tx_nobufs#]
 126
 127                         sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz]
 128                         alu[@buffer_start, --, b, $stemp]
 129                         alu[@packet_length, --, b, $stemp2]
 130                         beq[zero_byte_packet#]
 131                         alu[@channel, --, b, $stemp3]
 132                         immed[@packet_offset, 0]
 133
 134                 already_got_packet#:
 135                         local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
 136                 .end
 137
 138                 /*
 139                  * Determine tbuf element index, SOP/EOP flags, mpacket
 140                  * offset and mpacket size and cache buffer_handle and
 141                  * channel number.
 142                  */
 143                 .begin
 144                         alu[tbuf_element_index, --, b, @next_tbuf_mpacket]
 145                         alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1]
 146                         alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and,
 147                                                         (PARTITION_SIZE - 1)]
 148
 149                         alu[buffer_handle, --, b, @buffer_handle]
 150                         immed[@buffer_handle, 0]
 151
 152                         immed[sop_eop, 1]
 153
 154                         alu[packet_data, --, b, @packet_offset]
 155                         bne[no_sop#]
 156                         alu[sop_eop, sop_eop, or, 2]
 157                 no_sop#:
 158                         alu[packet_data, packet_data, +, @buffer_start]
 159
 160                         alu[channel, --, b, @channel]
 161
 162                         alu[mpacket_size, @packet_length, -, @packet_offset]
 163                         alu[--, 64, -, mpacket_size]
 164                         bhs[eop#]
 165                         alu[@buffer_handle, --, b, buffer_handle]
 166                         immed[mpacket_size, 64]
 167                         alu[sop_eop, sop_eop, and, 2]
 168                 eop#:
 169
 170                         alu[@packet_offset, @packet_offset, +, mpacket_size]
 171                 .end
 172
 173                 /*
 174                  * Wait until there's enough space in the TBUF.
 175                  */
 176                 .begin
 177                         .reg read $tx
 178                         .reg temp
 179                         .sig zzz
 180
 181                         ctx_arb[sig2]
 182
 183                         br[test_space#]
 184
 185                 loop_space#:
 186                         msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
 187
 188                         alu[temp, $tx, -, @old_tx_seq_0]
 189                         alu[temp, temp, and, 0xff]
 190                         alu[@mpkts_in_flight, @mpkts_in_flight, -, temp]
 191
 192                         alu[@old_tx_seq_0, --, b, $tx]
 193
 194                 test_space#:
 195                         alu[--, PARTITION_THRESH, -, @mpkts_in_flight]
 196                         blo[loop_space#]
 197
 198                         alu[@mpkts_in_flight, @mpkts_in_flight, +, 1]
 199
 200                         local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
 201                 .end
 202
 203                 /*
 204                  * Copy the packet data to the TBUF.
 205                  */
 206                 .begin
 207                         .reg temp
 208                         .sig copy_sig
 209
 210                         alu[temp, mpacket_size, -, 1]
 211                         alu_shf[temp, 0x10, or, temp, >>3]
 212                         alu_shf[temp, 0x10, or, temp, <<21]
 213                         alu_shf[temp, temp, or, tbuf_element_index, <<11]
 214                         alu_shf[--, temp, or, 1, <<18]
 215
 216                         dram[tbuf_wr, --, packet_data, 0, max_8],
 217                                         indirect_ref, sig_done[copy_sig]
 218                         ctx_arb[copy_sig]
 219                 .end
 220
 221                 /*
 222                  * Mark TBUF element as ready-to-be-transmitted.
 223                  */
 224                 .begin
 225                         .reg write $tsw $tsw2
 226                         .xfer_order $tsw $tsw2
 227                         .reg temp
 228                         .sig zzz
 229
 230                         alu_shf[temp, channel, or, mpacket_size, <<24]
 231                         alu_shf[$tsw, temp, or, sop_eop, <<8]
 232                         immed[$tsw2, 0]
 233
 234                         immed[temp, TBUF_CTRL]
 235                         alu_shf[temp, temp, or, tbuf_element_index, <<3]
 236                         msf[write, $tsw, temp, 0, 2], ctx_swap[zzz]
 237                 .end
 238
 239                 /*
 240                  * Resynchronise.
 241                  */
 242                 .begin
 243                         ctx_arb[sig3]
 244                         local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
 245                 .end
 246
 247                 /*
 248                  * If this was an EOP mpacket, recycle the TX buffer
 249                  * and signal the host.
 250                  */
 251                 .begin
 252                         .reg write $stemp
 253                         .sig zzz
 254
 255                         alu[--, sop_eop, and, 1]
 256                         beq[mpacket_tx_loop#]
 257
 258                 tx_done_ring_full#:
 259                         br_inp_state[SCR_Ring3_Status, tx_done_ring_full#]
 260
 261                         alu[$stemp, --, b, buffer_handle]
 262                         scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz]
 263                         cap[fast_wr, 0, XSCALE_INT_A]
 264                         br[mpacket_tx_loop#]
 265                 .end
 266         .end
 267
 268
 269 zero_byte_packet#:
 270         halt
 271
 272