git.oblomov.eu Git - linux-2.6/blob - drivers/block/DAC960.c

   1 /*
   2
   3   Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
   4
   5   Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
   6   Portions Copyright 2002 by Mylex (An IBM Business Unit)
   7
   8   This program is free software; you may redistribute and/or modify it under
   9   the terms of the GNU General Public License Version 2 as published by the
  10   Free Software Foundation.
  11
  12   This program is distributed in the hope that it will be useful, but
  13   WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
  14   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15   for complete details.
  16
  17 */
  18
  19
  20 #define DAC960_DriverVersion                    "2.5.48"
  21 #define DAC960_DriverDate                       "14 May 2006"
  22
  23
  24 #include <linux/module.h>
  25 #include <linux/types.h>
  26 #include <linux/miscdevice.h>
  27 #include <linux/blkdev.h>
  28 #include <linux/bio.h>
  29 #include <linux/completion.h>
  30 #include <linux/delay.h>
  31 #include <linux/genhd.h>
  32 #include <linux/hdreg.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/interrupt.h>
  35 #include <linux/ioport.h>
  36 #include <linux/mm.h>
  37 #include <linux/slab.h>
  38 #include <linux/proc_fs.h>
  39 #include <linux/reboot.h>
  40 #include <linux/spinlock.h>
  41 #include <linux/timer.h>
  42 #include <linux/pci.h>
  43 #include <linux/init.h>
  44 #include <linux/jiffies.h>
  45 #include <linux/random.h>
  46 #include <asm/io.h>
  47 #include <asm/uaccess.h>
  48 #include "DAC960.h"
  49
  50 #define DAC960_GAM_MINOR        252
  51
  52
  53 static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
  54 static int DAC960_ControllerCount;
  55 static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
  56
  57 static long disk_size(DAC960_Controller_T *p, int drive_nr)
  58 {
  59         if (p->FirmwareType == DAC960_V1_Controller) {
  60                 if (drive_nr >= p->LogicalDriveCount)
  61                         return 0;
  62                 return p->V1.LogicalDriveInformation[drive_nr].
  63                         LogicalDriveSize;
  64         } else {
  65                 DAC960_V2_LogicalDeviceInfo_T *i =
  66                         p->V2.LogicalDeviceInformation[drive_nr];
  67                 if (i == NULL)
  68                         return 0;
  69                 return i->ConfigurableDeviceSize;
  70         }
  71 }
  72
  73 static int DAC960_open(struct inode *inode, struct file *file)
  74 {
  75         struct gendisk *disk = inode->i_bdev->bd_disk;
  76         DAC960_Controller_T *p = disk->queue->queuedata;
  77         int drive_nr = (long)disk->private_data;
  78
  79         if (p->FirmwareType == DAC960_V1_Controller) {
  80                 if (p->V1.LogicalDriveInformation[drive_nr].
  81                     LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
  82                         return -ENXIO;
  83         } else {
  84                 DAC960_V2_LogicalDeviceInfo_T *i =
  85                         p->V2.LogicalDeviceInformation[drive_nr];
  86                 if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
  87                         return -ENXIO;
  88         }
  89
  90         check_disk_change(inode->i_bdev);
  91
  92         if (!get_capacity(p->disks[drive_nr]))
  93                 return -ENXIO;
  94         return 0;
  95 }
  96
  97 static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
  98 {
  99         struct gendisk *disk = bdev->bd_disk;
 100         DAC960_Controller_T *p = disk->queue->queuedata;
 101         int drive_nr = (long)disk->private_data;
 102
 103         if (p->FirmwareType == DAC960_V1_Controller) {
 104                 geo->heads = p->V1.GeometryTranslationHeads;
 105                 geo->sectors = p->V1.GeometryTranslationSectors;
 106                 geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
 107                         LogicalDriveSize / (geo->heads * geo->sectors);
 108         } else {
 109                 DAC960_V2_LogicalDeviceInfo_T *i =
 110                         p->V2.LogicalDeviceInformation[drive_nr];
 111                 switch (i->DriveGeometry) {
 112                 case DAC960_V2_Geometry_128_32:
 113                         geo->heads = 128;
 114                         geo->sectors = 32;
 115                         break;
 116                 case DAC960_V2_Geometry_255_63:
 117                         geo->heads = 255;
 118                         geo->sectors = 63;
 119                         break;
 120                 default:
 121                         DAC960_Error("Illegal Logical Device Geometry %d\n",
 122                                         p, i->DriveGeometry);
 123                         return -EINVAL;
 124                 }
 125
 126                 geo->cylinders = i->ConfigurableDeviceSize /
 127                         (geo->heads * geo->sectors);
 128         }
 129
 130         return 0;
 131 }
 132
 133 static int DAC960_media_changed(struct gendisk *disk)
 134 {
 135         DAC960_Controller_T *p = disk->queue->queuedata;
 136         int drive_nr = (long)disk->private_data;
 137
 138         if (!p->LogicalDriveInitiallyAccessible[drive_nr])
 139                 return 1;
 140         return 0;
 141 }
 142
 143 static int DAC960_revalidate_disk(struct gendisk *disk)
 144 {
 145         DAC960_Controller_T *p = disk->queue->queuedata;
 146         int unit = (long)disk->private_data;
 147
 148         set_capacity(disk, disk_size(p, unit));
 149         return 0;
 150 }
 151
 152 static struct block_device_operations DAC960_BlockDeviceOperations = {
 153         .owner                  = THIS_MODULE,
 154         .open                   = DAC960_open,
 155         .getgeo                 = DAC960_getgeo,
 156         .media_changed          = DAC960_media_changed,
 157         .revalidate_disk        = DAC960_revalidate_disk,
 158 };
 159
 160
 161 /*
 162   DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
 163   Copyright Notice, and Electronic Mail Address.
 164 */
 165
 166 static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
 167 {
 168   DAC960_Announce("***** DAC960 RAID Driver Version "
 169                   DAC960_DriverVersion " of "
 170                   DAC960_DriverDate " *****\n", Controller);
 171   DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
 172                   "<lnz@dandelion.com>\n", Controller);
 173 }
 174
 175
 176 /*
 177   DAC960_Failure prints a standardized error message, and then returns false.
 178 */
 179
 180 static boolean DAC960_Failure(DAC960_Controller_T *Controller,
 181                               unsigned char *ErrorMessage)
 182 {
 183   DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
 184                Controller);
 185   if (Controller->IO_Address == 0)
 186     DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
 187                  "PCI Address 0x%X\n", Controller,
 188                  Controller->Bus, Controller->Device,
 189                  Controller->Function, Controller->PCI_Address);
 190   else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
 191                     "0x%X PCI Address 0x%X\n", Controller,
 192                     Controller->Bus, Controller->Device,
 193                     Controller->Function, Controller->IO_Address,
 194                     Controller->PCI_Address);
 195   DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
 196   return false;
 197 }
 198
 199 /*
 200   init_dma_loaf() and slice_dma_loaf() are helper functions for
 201   aggregating the dma-mapped memory for a well-known collection of
 202   data structures that are of different lengths.
 203
 204   These routines don't guarantee any alignment.  The caller must
 205   include any space needed for alignment in the sizes of the structures
 206   that are passed in.
 207  */
 208
 209 static boolean init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
 210                                                                  size_t len)
 211 {
 212         void *cpu_addr;
 213         dma_addr_t dma_handle;
 214
 215         cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
 216         if (cpu_addr == NULL)
 217                 return false;
 218
 219         loaf->cpu_free = loaf->cpu_base = cpu_addr;
 220         loaf->dma_free =loaf->dma_base = dma_handle;
 221         loaf->length = len;
 222         memset(cpu_addr, 0, len);
 223         return true;
 224 }
 225
 226 static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
 227                                         dma_addr_t *dma_handle)
 228 {
 229         void *cpu_end = loaf->cpu_free + len;
 230         void *cpu_addr = loaf->cpu_free;
 231
 232         BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
 233         *dma_handle = loaf->dma_free;
 234         loaf->cpu_free = cpu_end;
 235         loaf->dma_free += len;
 236         return cpu_addr;
 237 }
 238
 239 static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
 240 {
 241         if (loaf_handle->cpu_base != NULL)
 242                 pci_free_consistent(dev, loaf_handle->length,
 243                         loaf_handle->cpu_base, loaf_handle->dma_base);
 244 }
 245
 246
 247 /*
 248   DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
 249   data structures for Controller.  It returns true on success and false on
 250   failure.
 251 */
 252
 253 static boolean DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
 254 {
 255   int CommandAllocationLength, CommandAllocationGroupSize;
 256   int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
 257   void *AllocationPointer = NULL;
 258   void *ScatterGatherCPU = NULL;
 259   dma_addr_t ScatterGatherDMA;
 260   struct pci_pool *ScatterGatherPool;
 261   void *RequestSenseCPU = NULL;
 262   dma_addr_t RequestSenseDMA;
 263   struct pci_pool *RequestSensePool = NULL;
 264
 265   if (Controller->FirmwareType == DAC960_V1_Controller)
 266     {
 267       CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
 268       CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
 269       ScatterGatherPool = pci_pool_create("DAC960_V1_ScatterGather",
 270                 Controller->PCIDevice,
 271         DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
 272         sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
 273       if (ScatterGatherPool == NULL)
 274             return DAC960_Failure(Controller,
 275                         "AUXILIARY STRUCTURE CREATION (SG)");
 276       Controller->ScatterGatherPool = ScatterGatherPool;
 277     }
 278   else
 279     {
 280       CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
 281       CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
 282       ScatterGatherPool = pci_pool_create("DAC960_V2_ScatterGather",
 283                 Controller->PCIDevice,
 284         DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
 285         sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
 286       if (ScatterGatherPool == NULL)
 287             return DAC960_Failure(Controller,
 288                         "AUXILIARY STRUCTURE CREATION (SG)");
 289       RequestSensePool = pci_pool_create("DAC960_V2_RequestSense",
 290                 Controller->PCIDevice, sizeof(DAC960_SCSI_RequestSense_T),
 291                 sizeof(int), 0);
 292       if (RequestSensePool == NULL) {
 293             pci_pool_destroy(ScatterGatherPool);
 294             return DAC960_Failure(Controller,
 295                         "AUXILIARY STRUCTURE CREATION (SG)");
 296       }
 297       Controller->ScatterGatherPool = ScatterGatherPool;
 298       Controller->V2.RequestSensePool = RequestSensePool;
 299     }
 300   Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
 301   Controller->FreeCommands = NULL;
 302   for (CommandIdentifier = 1;
 303        CommandIdentifier <= Controller->DriverQueueDepth;
 304        CommandIdentifier++)
 305     {
 306       DAC960_Command_T *Command;
 307       if (--CommandsRemaining <= 0)
 308         {
 309           CommandsRemaining =
 310                 Controller->DriverQueueDepth - CommandIdentifier + 1;
 311           if (CommandsRemaining > CommandAllocationGroupSize)
 312                 CommandsRemaining = CommandAllocationGroupSize;
 313           CommandGroupByteCount =
 314                 CommandsRemaining * CommandAllocationLength;
 315           AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
 316           if (AllocationPointer == NULL)
 317                 return DAC960_Failure(Controller,
 318                                         "AUXILIARY STRUCTURE CREATION");
 319          }
 320       Command = (DAC960_Command_T *) AllocationPointer;
 321       AllocationPointer += CommandAllocationLength;
 322       Command->CommandIdentifier = CommandIdentifier;
 323       Command->Controller = Controller;
 324       Command->Next = Controller->FreeCommands;
 325       Controller->FreeCommands = Command;
 326       Controller->Commands[CommandIdentifier-1] = Command;
 327       ScatterGatherCPU = pci_pool_alloc(ScatterGatherPool, SLAB_ATOMIC,
 328                                                         &ScatterGatherDMA);
 329       if (ScatterGatherCPU == NULL)
 330           return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
 331
 332       if (RequestSensePool != NULL) {
 333           RequestSenseCPU = pci_pool_alloc(RequestSensePool, SLAB_ATOMIC,
 334                                                 &RequestSenseDMA);
 335           if (RequestSenseCPU == NULL) {
 336                 pci_pool_free(ScatterGatherPool, ScatterGatherCPU,
 337                                 ScatterGatherDMA);
 338                 return DAC960_Failure(Controller,
 339                                         "AUXILIARY STRUCTURE CREATION");
 340           }
 341         }
 342      if (Controller->FirmwareType == DAC960_V1_Controller) {
 343         Command->cmd_sglist = Command->V1.ScatterList;
 344         Command->V1.ScatterGatherList =
 345                 (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
 346         Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
 347       } else {
 348         Command->cmd_sglist = Command->V2.ScatterList;
 349         Command->V2.ScatterGatherList =
 350                 (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
 351         Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
 352         Command->V2.RequestSense =
 353                                 (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
 354         Command->V2.RequestSenseDMA = RequestSenseDMA;
 355       }
 356     }
 357   return true;
 358 }
 359
 360
 361 /*
 362   DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
 363   structures for Controller.
 364 */
 365
 366 static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
 367 {
 368   int i;
 369   struct pci_pool *ScatterGatherPool = Controller->ScatterGatherPool;
 370   struct pci_pool *RequestSensePool = NULL;
 371   void *ScatterGatherCPU;
 372   dma_addr_t ScatterGatherDMA;
 373   void *RequestSenseCPU;
 374   dma_addr_t RequestSenseDMA;
 375   DAC960_Command_T *CommandGroup = NULL;
 376
 377
 378   if (Controller->FirmwareType == DAC960_V2_Controller)
 379         RequestSensePool = Controller->V2.RequestSensePool;
 380
 381   Controller->FreeCommands = NULL;
 382   for (i = 0; i < Controller->DriverQueueDepth; i++)
 383     {
 384       DAC960_Command_T *Command = Controller->Commands[i];
 385
 386       if (Command == NULL)
 387           continue;
 388
 389       if (Controller->FirmwareType == DAC960_V1_Controller) {
 390           ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
 391           ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
 392           RequestSenseCPU = NULL;
 393           RequestSenseDMA = (dma_addr_t)0;
 394       } else {
 395           ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
 396           ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
 397           RequestSenseCPU = (void *)Command->V2.RequestSense;
 398           RequestSenseDMA = Command->V2.RequestSenseDMA;
 399       }
 400       if (ScatterGatherCPU != NULL)
 401           pci_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
 402       if (RequestSenseCPU != NULL)
 403           pci_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
 404
 405       if ((Command->CommandIdentifier
 406            % Controller->CommandAllocationGroupSize) == 1) {
 407            /*
 408             * We can't free the group of commands until all of the
 409             * request sense and scatter gather dma structures are free.
 410             * Remember the beginning of the group, but don't free it
 411             * until we've reached the beginning of the next group.
 412             */
 413            kfree(CommandGroup);
 414            CommandGroup = Command;
 415       }
 416       Controller->Commands[i] = NULL;
 417     }
 418   kfree(CommandGroup);
 419
 420   if (Controller->CombinedStatusBuffer != NULL)
 421     {
 422       kfree(Controller->CombinedStatusBuffer);
 423       Controller->CombinedStatusBuffer = NULL;
 424       Controller->CurrentStatusBuffer = NULL;
 425     }
 426
 427   if (ScatterGatherPool != NULL)
 428         pci_pool_destroy(ScatterGatherPool);
 429   if (Controller->FirmwareType == DAC960_V1_Controller)
 430         return;
 431
 432   if (RequestSensePool != NULL)
 433         pci_pool_destroy(RequestSensePool);
 434
 435   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
 436         kfree(Controller->V2.LogicalDeviceInformation[i]);
 437         Controller->V2.LogicalDeviceInformation[i] = NULL;
 438   }
 439
 440   for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
 441     {
 442       kfree(Controller->V2.PhysicalDeviceInformation[i]);
 443       Controller->V2.PhysicalDeviceInformation[i] = NULL;
 444       kfree(Controller->V2.InquiryUnitSerialNumber[i]);
 445       Controller->V2.InquiryUnitSerialNumber[i] = NULL;
 446     }
 447 }
 448
 449
 450 /*
 451   DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
 452   Firmware Controllers.
 453 */
 454
 455 static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
 456 {
 457   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 458   memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
 459   Command->V1.CommandStatus = 0;
 460 }
 461
 462
 463 /*
 464   DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
 465   Firmware Controllers.
 466 */
 467
 468 static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
 469 {
 470   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 471   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
 472   Command->V2.CommandStatus = 0;
 473 }
 474
 475
 476 /*
 477   DAC960_AllocateCommand allocates a Command structure from Controller's
 478   free list.  During driver initialization, a special initialization command
 479   has been placed on the free list to guarantee that command allocation can
 480   never fail.
 481 */
 482
 483 static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
 484                                                        *Controller)
 485 {
 486   DAC960_Command_T *Command = Controller->FreeCommands;
 487   if (Command == NULL) return NULL;
 488   Controller->FreeCommands = Command->Next;
 489   Command->Next = NULL;
 490   return Command;
 491 }
 492
 493
 494 /*
 495   DAC960_DeallocateCommand deallocates Command, returning it to Controller's
 496   free list.
 497 */
 498
 499 static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
 500 {
 501   DAC960_Controller_T *Controller = Command->Controller;
 502
 503   Command->Request = NULL;
 504   Command->Next = Controller->FreeCommands;
 505   Controller->FreeCommands = Command;
 506 }
 507
 508
 509 /*
 510   DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
 511 */
 512
 513 static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
 514 {
 515   spin_unlock_irq(&Controller->queue_lock);
 516   __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
 517   spin_lock_irq(&Controller->queue_lock);
 518 }
 519
 520 /*
 521   DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
 522 */
 523
 524 static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
 525 {
 526   DAC960_Controller_T *Controller = Command->Controller;
 527   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 528   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 529   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 530       Controller->V2.NextCommandMailbox;
 531
 532   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 533   DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 534
 535   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 536       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 537       DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
 538
 539   Controller->V2.PreviousCommandMailbox2 =
 540       Controller->V2.PreviousCommandMailbox1;
 541   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 542
 543   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 544       NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 545
 546   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 547 }
 548
 549 /*
 550   DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
 551 */
 552
 553 static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
 554 {
 555   DAC960_Controller_T *Controller = Command->Controller;
 556   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 557   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 558   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 559     Controller->V2.NextCommandMailbox;
 560   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 561   DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 562   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 563       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 564     DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
 565   Controller->V2.PreviousCommandMailbox2 =
 566     Controller->V2.PreviousCommandMailbox1;
 567   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 568   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 569     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 570   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 571 }
 572
 573
 574 /*
 575   DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
 576 */
 577
 578 static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
 579 {
 580   DAC960_Controller_T *Controller = Command->Controller;
 581   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 582   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 583   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 584     Controller->V2.NextCommandMailbox;
 585   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 586   DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 587   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 588       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 589     DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
 590   Controller->V2.PreviousCommandMailbox2 =
 591     Controller->V2.PreviousCommandMailbox1;
 592   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 593   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 594     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 595   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 596 }
 597
 598
 599 /*
 600   DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
 601   Controllers with Dual Mode Firmware.
 602 */
 603
 604 static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
 605 {
 606   DAC960_Controller_T *Controller = Command->Controller;
 607   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 608   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 609   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 610     Controller->V1.NextCommandMailbox;
 611   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 612   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 613   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 614       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 615     DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
 616   Controller->V1.PreviousCommandMailbox2 =
 617     Controller->V1.PreviousCommandMailbox1;
 618   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 619   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 620     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 621   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 622 }
 623
 624
 625 /*
 626   DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
 627   Controllers with Single Mode Firmware.
 628 */
 629
 630 static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
 631 {
 632   DAC960_Controller_T *Controller = Command->Controller;
 633   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 634   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 635   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 636     Controller->V1.NextCommandMailbox;
 637   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 638   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 639   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 640       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 641     DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
 642   Controller->V1.PreviousCommandMailbox2 =
 643     Controller->V1.PreviousCommandMailbox1;
 644   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 645   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 646     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 647   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 648 }
 649
 650
 651 /*
 652   DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
 653   Controllers with Dual Mode Firmware.
 654 */
 655
 656 static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
 657 {
 658   DAC960_Controller_T *Controller = Command->Controller;
 659   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 660   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 661   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 662     Controller->V1.NextCommandMailbox;
 663   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 664   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 665   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 666       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 667     DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
 668   Controller->V1.PreviousCommandMailbox2 =
 669     Controller->V1.PreviousCommandMailbox1;
 670   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 671   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 672     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 673   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 674 }
 675
 676
 677 /*
 678   DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
 679   Controllers with Single Mode Firmware.
 680 */
 681
 682 static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
 683 {
 684   DAC960_Controller_T *Controller = Command->Controller;
 685   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 686   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 687   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 688     Controller->V1.NextCommandMailbox;
 689   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 690   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 691   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 692       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 693     DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
 694   Controller->V1.PreviousCommandMailbox2 =
 695     Controller->V1.PreviousCommandMailbox1;
 696   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 697   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 698     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 699   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 700 }
 701
 702
 703 /*
 704   DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
 705 */
 706
 707 static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
 708 {
 709   DAC960_Controller_T *Controller = Command->Controller;
 710   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 711   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 712   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 713   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 714     udelay(1);
 715   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 716   DAC960_PD_NewCommand(ControllerBaseAddress);
 717 }
 718
 719
 720 /*
 721   DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
 722 */
 723
 724 static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
 725 {
 726   DAC960_Controller_T *Controller = Command->Controller;
 727   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 728   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 729   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 730   switch (CommandMailbox->Common.CommandOpcode)
 731     {
 732     case DAC960_V1_Enquiry:
 733       CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
 734       break;
 735     case DAC960_V1_GetDeviceState:
 736       CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
 737       break;
 738     case DAC960_V1_Read:
 739       CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
 740       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 741       break;
 742     case DAC960_V1_Write:
 743       CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
 744       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 745       break;
 746     case DAC960_V1_ReadWithScatterGather:
 747       CommandMailbox->Common.CommandOpcode =
 748         DAC960_V1_ReadWithScatterGather_Old;
 749       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 750       break;
 751     case DAC960_V1_WriteWithScatterGather:
 752       CommandMailbox->Common.CommandOpcode =
 753         DAC960_V1_WriteWithScatterGather_Old;
 754       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 755       break;
 756     default:
 757       break;
 758     }
 759   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 760     udelay(1);
 761   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 762   DAC960_PD_NewCommand(ControllerBaseAddress);
 763 }
 764
 765
 766 /*
 767   DAC960_ExecuteCommand executes Command and waits for completion.
 768 */
 769
 770 static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
 771 {
 772   DAC960_Controller_T *Controller = Command->Controller;
 773   DECLARE_COMPLETION_ONSTACK(Completion);
 774   unsigned long flags;
 775   Command->Completion = &Completion;
 776
 777   spin_lock_irqsave(&Controller->queue_lock, flags);
 778   DAC960_QueueCommand(Command);
 779   spin_unlock_irqrestore(&Controller->queue_lock, flags);
 780
 781   if (in_interrupt())
 782           return;
 783   wait_for_completion(&Completion);
 784 }
 785
 786
 787 /*
 788   DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
 789   Command and waits for completion.  It returns true on success and false
 790   on failure.
 791 */
 792
 793 static boolean DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
 794                                       DAC960_V1_CommandOpcode_T CommandOpcode,
 795                                       dma_addr_t DataDMA)
 796 {
 797   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 798   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 799   DAC960_V1_CommandStatus_T CommandStatus;
 800   DAC960_V1_ClearCommand(Command);
 801   Command->CommandType = DAC960_ImmediateCommand;
 802   CommandMailbox->Type3.CommandOpcode = CommandOpcode;
 803   CommandMailbox->Type3.BusAddress = DataDMA;
 804   DAC960_ExecuteCommand(Command);
 805   CommandStatus = Command->V1.CommandStatus;
 806   DAC960_DeallocateCommand(Command);
 807   return (CommandStatus == DAC960_V1_NormalCompletion);
 808 }
 809
 810
 811 /*
 812   DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
 813   Command and waits for completion.  It returns true on success and false
 814   on failure.
 815 */
 816
 817 static boolean DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
 818                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 819                                        unsigned char CommandOpcode2,
 820                                        dma_addr_t DataDMA)
 821 {
 822   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 823   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 824   DAC960_V1_CommandStatus_T CommandStatus;
 825   DAC960_V1_ClearCommand(Command);
 826   Command->CommandType = DAC960_ImmediateCommand;
 827   CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
 828   CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
 829   CommandMailbox->Type3B.BusAddress = DataDMA;
 830   DAC960_ExecuteCommand(Command);
 831   CommandStatus = Command->V1.CommandStatus;
 832   DAC960_DeallocateCommand(Command);
 833   return (CommandStatus == DAC960_V1_NormalCompletion);
 834 }
 835
 836
 837 /*
 838   DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
 839   Command and waits for completion.  It returns true on success and false
 840   on failure.
 841 */
 842
 843 static boolean DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
 844                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 845                                        unsigned char Channel,
 846                                        unsigned char TargetID,
 847                                        dma_addr_t DataDMA)
 848 {
 849   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 850   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 851   DAC960_V1_CommandStatus_T CommandStatus;
 852   DAC960_V1_ClearCommand(Command);
 853   Command->CommandType = DAC960_ImmediateCommand;
 854   CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
 855   CommandMailbox->Type3D.Channel = Channel;
 856   CommandMailbox->Type3D.TargetID = TargetID;
 857   CommandMailbox->Type3D.BusAddress = DataDMA;
 858   DAC960_ExecuteCommand(Command);
 859   CommandStatus = Command->V1.CommandStatus;
 860   DAC960_DeallocateCommand(Command);
 861   return (CommandStatus == DAC960_V1_NormalCompletion);
 862 }
 863
 864
 865 /*
 866   DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
 867   Reading IOCTL Command and waits for completion.  It returns true on success
 868   and false on failure.
 869
 870   Return data in The controller's HealthStatusBuffer, which is dma-able memory
 871 */
 872
 873 static boolean DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
 874 {
 875   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 876   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 877   DAC960_V2_CommandStatus_T CommandStatus;
 878   DAC960_V2_ClearCommand(Command);
 879   Command->CommandType = DAC960_ImmediateCommand;
 880   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
 881   CommandMailbox->Common.CommandControlBits
 882                         .DataTransferControllerToHost = true;
 883   CommandMailbox->Common.CommandControlBits
 884                         .NoAutoRequestSense = true;
 885   CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
 886   CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
 887   CommandMailbox->Common.DataTransferMemoryAddress
 888                         .ScatterGatherSegments[0]
 889                         .SegmentDataPointer =
 890     Controller->V2.HealthStatusBufferDMA;
 891   CommandMailbox->Common.DataTransferMemoryAddress
 892                         .ScatterGatherSegments[0]
 893                         .SegmentByteCount =
 894     CommandMailbox->Common.DataTransferSize;
 895   DAC960_ExecuteCommand(Command);
 896   CommandStatus = Command->V2.CommandStatus;
 897   DAC960_DeallocateCommand(Command);
 898   return (CommandStatus == DAC960_V2_NormalCompletion);
 899 }
 900
 901
 902 /*
 903   DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
 904   Information Reading IOCTL Command and waits for completion.  It returns
 905   true on success and false on failure.
 906
 907   Data is returned in the controller's V2.NewControllerInformation dma-able
 908   memory buffer.
 909 */
 910
 911 static boolean DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
 912 {
 913   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 914   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 915   DAC960_V2_CommandStatus_T CommandStatus;
 916   DAC960_V2_ClearCommand(Command);
 917   Command->CommandType = DAC960_ImmediateCommand;
 918   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
 919   CommandMailbox->ControllerInfo.CommandControlBits
 920                                 .DataTransferControllerToHost = true;
 921   CommandMailbox->ControllerInfo.CommandControlBits
 922                                 .NoAutoRequestSense = true;
 923   CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
 924   CommandMailbox->ControllerInfo.ControllerNumber = 0;
 925   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
 926   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 927                                 .ScatterGatherSegments[0]
 928                                 .SegmentDataPointer =
 929         Controller->V2.NewControllerInformationDMA;
 930   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 931                                 .ScatterGatherSegments[0]
 932                                 .SegmentByteCount =
 933     CommandMailbox->ControllerInfo.DataTransferSize;
 934   DAC960_ExecuteCommand(Command);
 935   CommandStatus = Command->V2.CommandStatus;
 936   DAC960_DeallocateCommand(Command);
 937   return (CommandStatus == DAC960_V2_NormalCompletion);
 938 }
 939
 940
 941 /*
 942   DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
 943   Device Information Reading IOCTL Command and waits for completion.  It
 944   returns true on success and false on failure.
 945
 946   Data is returned in the controller's V2.NewLogicalDeviceInformation
 947 */
 948
 949 static boolean DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
 950                                            unsigned short LogicalDeviceNumber)
 951 {
 952   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 953   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 954   DAC960_V2_CommandStatus_T CommandStatus;
 955
 956   DAC960_V2_ClearCommand(Command);
 957   Command->CommandType = DAC960_ImmediateCommand;
 958   CommandMailbox->LogicalDeviceInfo.CommandOpcode =
 959                                 DAC960_V2_IOCTL;
 960   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 961                                    .DataTransferControllerToHost = true;
 962   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 963                                    .NoAutoRequestSense = true;
 964   CommandMailbox->LogicalDeviceInfo.DataTransferSize =
 965                                 sizeof(DAC960_V2_LogicalDeviceInfo_T);
 966   CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
 967     LogicalDeviceNumber;
 968   CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
 969   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 970                                    .ScatterGatherSegments[0]
 971                                    .SegmentDataPointer =
 972         Controller->V2.NewLogicalDeviceInformationDMA;
 973   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 974                                    .ScatterGatherSegments[0]
 975                                    .SegmentByteCount =
 976     CommandMailbox->LogicalDeviceInfo.DataTransferSize;
 977   DAC960_ExecuteCommand(Command);
 978   CommandStatus = Command->V2.CommandStatus;
 979   DAC960_DeallocateCommand(Command);
 980   return (CommandStatus == DAC960_V2_NormalCompletion);
 981 }
 982
 983
 984 /*
 985   DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
 986   Physical Device Information" IOCTL Command and waits for completion.  It
 987   returns true on success and false on failure.
 988
 989   The Channel, TargetID, LogicalUnit arguments should be 0 the first time
 990   this function is called for a given controller.  This will return data
 991   for the "first" device on that controller.  The returned data includes a
 992   Channel, TargetID, LogicalUnit that can be passed in to this routine to
 993   get data for the NEXT device on that controller.
 994
 995   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
 996   memory buffer.
 997
 998 */
 999
1000 static boolean DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
1001                                             unsigned char Channel,
1002                                             unsigned char TargetID,
1003                                             unsigned char LogicalUnit)
1004 {
1005   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1006   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1007   DAC960_V2_CommandStatus_T CommandStatus;
1008
1009   DAC960_V2_ClearCommand(Command);
1010   Command->CommandType = DAC960_ImmediateCommand;
1011   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
1012   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1013                                     .DataTransferControllerToHost = true;
1014   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1015                                     .NoAutoRequestSense = true;
1016   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
1017                                 sizeof(DAC960_V2_PhysicalDeviceInfo_T);
1018   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
1019   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
1020   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
1021   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
1022                                         DAC960_V2_GetPhysicalDeviceInfoValid;
1023   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1024                                     .ScatterGatherSegments[0]
1025                                     .SegmentDataPointer =
1026                                         Controller->V2.NewPhysicalDeviceInformationDMA;
1027   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1028                                     .ScatterGatherSegments[0]
1029                                     .SegmentByteCount =
1030     CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
1031   DAC960_ExecuteCommand(Command);
1032   CommandStatus = Command->V2.CommandStatus;
1033   DAC960_DeallocateCommand(Command);
1034   return (CommandStatus == DAC960_V2_NormalCompletion);
1035 }
1036
1037
1038 static void DAC960_V2_ConstructNewUnitSerialNumber(
1039         DAC960_Controller_T *Controller,
1040         DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
1041         int LogicalUnit)
1042 {
1043       CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
1044       CommandMailbox->SCSI_10.CommandControlBits
1045                              .DataTransferControllerToHost = true;
1046       CommandMailbox->SCSI_10.CommandControlBits
1047                              .NoAutoRequestSense = true;
1048       CommandMailbox->SCSI_10.DataTransferSize =
1049         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1050       CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
1051       CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
1052       CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
1053       CommandMailbox->SCSI_10.CDBLength = 6;
1054       CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
1055       CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
1056       CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
1057       CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
1058       CommandMailbox->SCSI_10.SCSI_CDB[4] =
1059         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1060       CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
1061       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1062                              .ScatterGatherSegments[0]
1063                              .SegmentDataPointer =
1064                 Controller->V2.NewInquiryUnitSerialNumberDMA;
1065       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1066                              .ScatterGatherSegments[0]
1067                              .SegmentByteCount =
1068                 CommandMailbox->SCSI_10.DataTransferSize;
1069 }
1070
1071
1072 /*
1073   DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
1074   Inquiry command to a SCSI device identified by Channel number,
1075   Target id, Logical Unit Number.  This function Waits for completion
1076   of the command.
1077
1078   The return data includes Unit Serial Number information for the
1079   specified device.
1080
1081   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1082   memory buffer.
1083 */
1084
1085 static boolean DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
1086                         int Channel, int TargetID, int LogicalUnit)
1087 {
1088       DAC960_Command_T *Command;
1089       DAC960_V2_CommandMailbox_T *CommandMailbox;
1090       DAC960_V2_CommandStatus_T CommandStatus;
1091
1092       Command = DAC960_AllocateCommand(Controller);
1093       CommandMailbox = &Command->V2.CommandMailbox;
1094       DAC960_V2_ClearCommand(Command);
1095       Command->CommandType = DAC960_ImmediateCommand;
1096
1097       DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
1098                         Channel, TargetID, LogicalUnit);
1099
1100       DAC960_ExecuteCommand(Command);
1101       CommandStatus = Command->V2.CommandStatus;
1102       DAC960_DeallocateCommand(Command);
1103       return (CommandStatus == DAC960_V2_NormalCompletion);
1104 }
1105
1106
1107 /*
1108   DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
1109   Operation IOCTL Command and waits for completion.  It returns true on
1110   success and false on failure.
1111 */
1112
1113 static boolean DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
1114                                          DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
1115                                          DAC960_V2_OperationDevice_T
1116                                            OperationDevice)
1117 {
1118   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1119   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1120   DAC960_V2_CommandStatus_T CommandStatus;
1121   DAC960_V2_ClearCommand(Command);
1122   Command->CommandType = DAC960_ImmediateCommand;
1123   CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
1124   CommandMailbox->DeviceOperation.CommandControlBits
1125                                  .DataTransferControllerToHost = true;
1126   CommandMailbox->DeviceOperation.CommandControlBits
1127                                  .NoAutoRequestSense = true;
1128   CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
1129   CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
1130   DAC960_ExecuteCommand(Command);
1131   CommandStatus = Command->V2.CommandStatus;
1132   DAC960_DeallocateCommand(Command);
1133   return (CommandStatus == DAC960_V2_NormalCompletion);
1134 }
1135
1136
1137 /*
1138   DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1139   for DAC960 V1 Firmware Controllers.
1140
1141   PD and P controller types have no memory mailbox, but still need the
1142   other dma mapped memory.
1143 */
1144
1145 static boolean DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
1146                                                       *Controller)
1147 {
1148   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1149   DAC960_HardwareType_T hw_type = Controller->HardwareType;
1150   struct pci_dev *PCI_Device = Controller->PCIDevice;
1151   struct dma_loaf *DmaPages = &Controller->DmaPages;
1152   size_t DmaPagesSize;
1153   size_t CommandMailboxesSize;
1154   size_t StatusMailboxesSize;
1155
1156   DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
1157   dma_addr_t CommandMailboxesMemoryDMA;
1158
1159   DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
1160   dma_addr_t StatusMailboxesMemoryDMA;
1161
1162   DAC960_V1_CommandMailbox_T CommandMailbox;
1163   DAC960_V1_CommandStatus_T CommandStatus;
1164   int TimeoutCounter;
1165   int i;
1166
1167
1168   if (pci_set_dma_mask(Controller->PCIDevice, DAC690_V1_PciDmaMask))
1169         return DAC960_Failure(Controller, "DMA mask out of range");
1170   Controller->BounceBufferLimit = DAC690_V1_PciDmaMask;
1171
1172   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
1173     CommandMailboxesSize =  0;
1174     StatusMailboxesSize = 0;
1175   } else {
1176     CommandMailboxesSize =  DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
1177     StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
1178   }
1179   DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
1180         sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
1181         sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
1182         sizeof(DAC960_V1_RebuildProgress_T) +
1183         sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
1184         sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
1185         sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
1186         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1187
1188   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
1189         return false;
1190
1191
1192   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1193         goto skip_mailboxes;
1194
1195   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1196                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1197
1198   /* These are the base addresses for the command memory mailbox array */
1199   Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
1200   Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1201
1202   CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
1203   Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
1204   Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
1205   Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
1206   Controller->V1.PreviousCommandMailbox2 =
1207                                         Controller->V1.LastCommandMailbox - 1;
1208
1209   /* These are the base addresses for the status memory mailbox array */
1210   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1211                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1212
1213   Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
1214   Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1215   StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
1216   Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
1217   Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
1218
1219 skip_mailboxes:
1220   Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
1221                 sizeof(DAC960_V1_DCDB_T),
1222                 &Controller->V1.MonitoringDCDB_DMA);
1223
1224   Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
1225                 sizeof(DAC960_V1_Enquiry_T),
1226                 &Controller->V1.NewEnquiryDMA);
1227
1228   Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
1229                 sizeof(DAC960_V1_ErrorTable_T),
1230                 &Controller->V1.NewErrorTableDMA);
1231
1232   Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
1233                 sizeof(DAC960_V1_EventLogEntry_T),
1234                 &Controller->V1.EventLogEntryDMA);
1235
1236   Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
1237                 sizeof(DAC960_V1_RebuildProgress_T),
1238                 &Controller->V1.RebuildProgressDMA);
1239
1240   Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
1241                 sizeof(DAC960_V1_LogicalDriveInformationArray_T),
1242                 &Controller->V1.NewLogicalDriveInformationDMA);
1243
1244   Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
1245                 sizeof(DAC960_V1_BackgroundInitializationStatus_T),
1246                 &Controller->V1.BackgroundInitializationStatusDMA);
1247
1248   Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
1249                 sizeof(DAC960_V1_DeviceState_T),
1250                 &Controller->V1.NewDeviceStateDMA);
1251
1252   Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
1253                 sizeof(DAC960_SCSI_Inquiry_T),
1254                 &Controller->V1.NewInquiryStandardDataDMA);
1255
1256   Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1257                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1258                 &Controller->V1.NewInquiryUnitSerialNumberDMA);
1259
1260   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1261         return true;
1262
1263   /* Enable the Memory Mailbox Interface. */
1264   Controller->V1.DualModeMemoryMailboxInterface = true;
1265   CommandMailbox.TypeX.CommandOpcode = 0x2B;
1266   CommandMailbox.TypeX.CommandIdentifier = 0;
1267   CommandMailbox.TypeX.CommandOpcode2 = 0x14;
1268   CommandMailbox.TypeX.CommandMailboxesBusAddress =
1269                                 Controller->V1.FirstCommandMailboxDMA;
1270   CommandMailbox.TypeX.StatusMailboxesBusAddress =
1271                                 Controller->V1.FirstStatusMailboxDMA;
1272 #define TIMEOUT_COUNT 1000000
1273
1274   for (i = 0; i < 2; i++)
1275     switch (Controller->HardwareType)
1276       {
1277       case DAC960_LA_Controller:
1278         TimeoutCounter = TIMEOUT_COUNT;
1279         while (--TimeoutCounter >= 0)
1280           {
1281             if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
1282               break;
1283             udelay(10);
1284           }
1285         if (TimeoutCounter < 0) return false;
1286         DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1287         DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
1288         TimeoutCounter = TIMEOUT_COUNT;
1289         while (--TimeoutCounter >= 0)
1290           {
1291             if (DAC960_LA_HardwareMailboxStatusAvailableP(
1292                   ControllerBaseAddress))
1293               break;
1294             udelay(10);
1295           }
1296         if (TimeoutCounter < 0) return false;
1297         CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
1298         DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1299         DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1300         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1301         Controller->V1.DualModeMemoryMailboxInterface = false;
1302         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1303         break;
1304       case DAC960_PG_Controller:
1305         TimeoutCounter = TIMEOUT_COUNT;
1306         while (--TimeoutCounter >= 0)
1307           {
1308             if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
1309               break;
1310             udelay(10);
1311           }
1312         if (TimeoutCounter < 0) return false;
1313         DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1314         DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
1315
1316         TimeoutCounter = TIMEOUT_COUNT;
1317         while (--TimeoutCounter >= 0)
1318           {
1319             if (DAC960_PG_HardwareMailboxStatusAvailableP(
1320                   ControllerBaseAddress))
1321               break;
1322             udelay(10);
1323           }
1324         if (TimeoutCounter < 0) return false;
1325         CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
1326         DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1327         DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1328         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1329         Controller->V1.DualModeMemoryMailboxInterface = false;
1330         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1331         break;
1332       default:
1333         DAC960_Failure(Controller, "Unknown Controller Type\n");
1334         break;
1335       }
1336   return false;
1337 }
1338
1339
1340 /*
1341   DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1342   for DAC960 V2 Firmware Controllers.
1343
1344   Aggregate the space needed for the controller's memory mailbox and
1345   the other data structures that will be targets of dma transfers with
1346   the controller.  Allocate a dma-mapped region of memory to hold these
1347   structures.  Then, save CPU pointers and dma_addr_t values to reference
1348   the structures that are contained in that region.
1349 */
1350
1351 static boolean DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
1352                                                       *Controller)
1353 {
1354   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1355   struct pci_dev *PCI_Device = Controller->PCIDevice;
1356   struct dma_loaf *DmaPages = &Controller->DmaPages;
1357   size_t DmaPagesSize;
1358   size_t CommandMailboxesSize;
1359   size_t StatusMailboxesSize;
1360
1361   DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
1362   dma_addr_t CommandMailboxesMemoryDMA;
1363
1364   DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
1365   dma_addr_t StatusMailboxesMemoryDMA;
1366
1367   DAC960_V2_CommandMailbox_T *CommandMailbox;
1368   dma_addr_t    CommandMailboxDMA;
1369   DAC960_V2_CommandStatus_T CommandStatus;
1370
1371   if (pci_set_dma_mask(Controller->PCIDevice, DAC690_V2_PciDmaMask))
1372         return DAC960_Failure(Controller, "DMA mask out of range");
1373   Controller->BounceBufferLimit = DAC690_V2_PciDmaMask;
1374
1375   /* This is a temporary dma mapping, used only in the scope of this function */
1376   CommandMailbox =
1377           (DAC960_V2_CommandMailbox_T *)pci_alloc_consistent( PCI_Device,
1378                 sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
1379   if (CommandMailbox == NULL)
1380           return false;
1381
1382   CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
1383   StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
1384   DmaPagesSize =
1385     CommandMailboxesSize + StatusMailboxesSize +
1386     sizeof(DAC960_V2_HealthStatusBuffer_T) +
1387     sizeof(DAC960_V2_ControllerInfo_T) +
1388     sizeof(DAC960_V2_LogicalDeviceInfo_T) +
1389     sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
1390     sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
1391     sizeof(DAC960_V2_Event_T) +
1392     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
1393
1394   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
1395         pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1396                                         CommandMailbox, CommandMailboxDMA);
1397         return false;
1398   }
1399
1400   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1401                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1402
1403   /* These are the base addresses for the command memory mailbox array */
1404   Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
1405   Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1406
1407   CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
1408   Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
1409   Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
1410   Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
1411   Controller->V2.PreviousCommandMailbox2 =
1412                                         Controller->V2.LastCommandMailbox - 1;
1413
1414   /* These are the base addresses for the status memory mailbox array */
1415   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1416                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1417
1418   Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
1419   Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1420   StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
1421   Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
1422   Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
1423
1424   Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
1425                 sizeof(DAC960_V2_HealthStatusBuffer_T),
1426                 &Controller->V2.HealthStatusBufferDMA);
1427
1428   Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
1429                 sizeof(DAC960_V2_ControllerInfo_T),
1430                 &Controller->V2.NewControllerInformationDMA);
1431
1432   Controller->V2.NewLogicalDeviceInformation =  slice_dma_loaf(DmaPages,
1433                 sizeof(DAC960_V2_LogicalDeviceInfo_T),
1434                 &Controller->V2.NewLogicalDeviceInformationDMA);
1435
1436   Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
1437                 sizeof(DAC960_V2_PhysicalDeviceInfo_T),
1438                 &Controller->V2.NewPhysicalDeviceInformationDMA);
1439
1440   Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1441                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1442                 &Controller->V2.NewInquiryUnitSerialNumberDMA);
1443
1444   Controller->V2.Event = slice_dma_loaf(DmaPages,
1445                 sizeof(DAC960_V2_Event_T),
1446                 &Controller->V2.EventDMA);
1447
1448   Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
1449                 sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
1450                 &Controller->V2.PhysicalToLogicalDeviceDMA);
1451
1452   /*
1453     Enable the Memory Mailbox Interface.
1454
1455     I don't know why we can't just use one of the memory mailboxes
1456     we just allocated to do this, instead of using this temporary one.
1457     Try this change later.
1458   */
1459   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
1460   CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
1461   CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
1462   CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
1463   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
1464     (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
1465   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
1466     (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
1467   CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
1468   CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
1469   CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
1470   CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
1471   CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
1472   CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
1473                                         Controller->V2.HealthStatusBufferDMA;
1474   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
1475                                         Controller->V2.FirstCommandMailboxDMA;
1476   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
1477                                         Controller->V2.FirstStatusMailboxDMA;
1478   switch (Controller->HardwareType)
1479     {
1480     case DAC960_GEM_Controller:
1481       while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
1482         udelay(1);
1483       DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1484       DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
1485       while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1486         udelay(1);
1487       CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
1488       DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1489       DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1490       break;
1491     case DAC960_BA_Controller:
1492       while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
1493         udelay(1);
1494       DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1495       DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
1496       while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1497         udelay(1);
1498       CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
1499       DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1500       DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1501       break;
1502     case DAC960_LP_Controller:
1503       while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
1504         udelay(1);
1505       DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1506       DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
1507       while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1508         udelay(1);
1509       CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
1510       DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1511       DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1512       break;
1513     default:
1514       DAC960_Failure(Controller, "Unknown Controller Type\n");
1515       CommandStatus = DAC960_V2_AbormalCompletion;
1516       break;
1517     }
1518   pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1519                                         CommandMailbox, CommandMailboxDMA);
1520   return (CommandStatus == DAC960_V2_NormalCompletion);
1521 }
1522
1523
1524 /*
1525   DAC960_V1_ReadControllerConfiguration reads the Configuration Information
1526   from DAC960 V1 Firmware Controllers and initializes the Controller structure.
1527 */
1528
1529 static boolean DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
1530                                                      *Controller)
1531 {
1532   DAC960_V1_Enquiry2_T *Enquiry2;
1533   dma_addr_t Enquiry2DMA;
1534   DAC960_V1_Config2_T *Config2;
1535   dma_addr_t Config2DMA;
1536   int LogicalDriveNumber, Channel, TargetID;
1537   struct dma_loaf local_dma;
1538
1539   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1540                 sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
1541         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1542
1543   Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
1544   Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
1545
1546   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
1547                               Controller->V1.NewEnquiryDMA)) {
1548     free_dma_loaf(Controller->PCIDevice, &local_dma);
1549     return DAC960_Failure(Controller, "ENQUIRY");
1550   }
1551   memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
1552                                                 sizeof(DAC960_V1_Enquiry_T));
1553
1554   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
1555     free_dma_loaf(Controller->PCIDevice, &local_dma);
1556     return DAC960_Failure(Controller, "ENQUIRY2");
1557   }
1558
1559   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
1560     free_dma_loaf(Controller->PCIDevice, &local_dma);
1561     return DAC960_Failure(Controller, "READ CONFIG2");
1562   }
1563
1564   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
1565                               Controller->V1.NewLogicalDriveInformationDMA)) {
1566     free_dma_loaf(Controller->PCIDevice, &local_dma);
1567     return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
1568   }
1569   memcpy(&Controller->V1.LogicalDriveInformation,
1570                 Controller->V1.NewLogicalDriveInformation,
1571                 sizeof(DAC960_V1_LogicalDriveInformationArray_T));
1572
1573   for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
1574     for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
1575       if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
1576                                    Channel, TargetID,
1577                                    Controller->V1.NewDeviceStateDMA)) {
1578                 free_dma_loaf(Controller->PCIDevice, &local_dma);
1579                 return DAC960_Failure(Controller, "GET DEVICE STATE");
1580         }
1581         memcpy(&Controller->V1.DeviceState[Channel][TargetID],
1582                 Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
1583      }
1584   /*
1585     Initialize the Controller Model Name and Full Model Name fields.
1586   */
1587   switch (Enquiry2->HardwareID.SubModel)
1588     {
1589     case DAC960_V1_P_PD_PU:
1590       if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
1591         strcpy(Controller->ModelName, "DAC960PU");
1592       else strcpy(Controller->ModelName, "DAC960PD");
1593       break;
1594     case DAC960_V1_PL:
1595       strcpy(Controller->ModelName, "DAC960PL");
1596       break;
1597     case DAC960_V1_PG:
1598       strcpy(Controller->ModelName, "DAC960PG");
1599       break;
1600     case DAC960_V1_PJ:
1601       strcpy(Controller->ModelName, "DAC960PJ");
1602       break;
1603     case DAC960_V1_PR:
1604       strcpy(Controller->ModelName, "DAC960PR");
1605       break;
1606     case DAC960_V1_PT:
1607       strcpy(Controller->ModelName, "DAC960PT");
1608       break;
1609     case DAC960_V1_PTL0:
1610       strcpy(Controller->ModelName, "DAC960PTL0");
1611       break;
1612     case DAC960_V1_PRL:
1613       strcpy(Controller->ModelName, "DAC960PRL");
1614       break;
1615     case DAC960_V1_PTL1:
1616       strcpy(Controller->ModelName, "DAC960PTL1");
1617       break;
1618     case DAC960_V1_1164P:
1619       strcpy(Controller->ModelName, "DAC1164P");
1620       break;
1621     default:
1622       free_dma_loaf(Controller->PCIDevice, &local_dma);
1623       return DAC960_Failure(Controller, "MODEL VERIFICATION");
1624     }
1625   strcpy(Controller->FullModelName, "Mylex ");
1626   strcat(Controller->FullModelName, Controller->ModelName);
1627   /*
1628     Initialize the Controller Firmware Version field and verify that it
1629     is a supported firmware version.  The supported firmware versions are:
1630
1631     DAC1164P                5.06 and above
1632     DAC960PTL/PRL/PJ/PG     4.06 and above
1633     DAC960PU/PD/PL          3.51 and above
1634     DAC960PU/PD/PL/P        2.73 and above
1635   */
1636 #if defined(CONFIG_ALPHA)
1637   /*
1638     DEC Alpha machines were often equipped with DAC960 cards that were
1639     OEMed from Mylex, and had their own custom firmware. Version 2.70,
1640     the last custom FW revision to be released by DEC for these older
1641     controllers, appears to work quite well with this driver.
1642
1643     Cards tested successfully were several versions each of the PD and
1644     PU, called by DEC the KZPSC and KZPAC, respectively, and having
1645     the Manufacturer Numbers (from Mylex), usually on a sticker on the
1646     back of the board, of:
1647
1648     KZPSC:  D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
1649     KZPAC:  D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
1650   */
1651 # define FIRMWARE_27X   "2.70"
1652 #else
1653 # define FIRMWARE_27X   "2.73"
1654 #endif
1655
1656   if (Enquiry2->FirmwareID.MajorVersion == 0)
1657     {
1658       Enquiry2->FirmwareID.MajorVersion =
1659         Controller->V1.Enquiry.MajorFirmwareVersion;
1660       Enquiry2->FirmwareID.MinorVersion =
1661         Controller->V1.Enquiry.MinorFirmwareVersion;
1662       Enquiry2->FirmwareID.FirmwareType = '0';
1663       Enquiry2->FirmwareID.TurnID = 0;
1664     }
1665   sprintf(Controller->FirmwareVersion, "%d.%02d-%c-%02d",
1666           Enquiry2->FirmwareID.MajorVersion, Enquiry2->FirmwareID.MinorVersion,
1667           Enquiry2->FirmwareID.FirmwareType, Enquiry2->FirmwareID.TurnID);
1668   if (!((Controller->FirmwareVersion[0] == '5' &&
1669          strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
1670         (Controller->FirmwareVersion[0] == '4' &&
1671          strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
1672         (Controller->FirmwareVersion[0] == '3' &&
1673          strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
1674         (Controller->FirmwareVersion[0] == '2' &&
1675          strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
1676     {
1677       DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
1678       DAC960_Error("Firmware Version = '%s'\n", Controller,
1679                    Controller->FirmwareVersion);
1680       free_dma_loaf(Controller->PCIDevice, &local_dma);
1681       return false;
1682     }
1683   /*
1684     Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
1685     Enclosure Management Enabled fields.
1686   */
1687   Controller->Channels = Enquiry2->ActualChannels;
1688   Controller->Targets = Enquiry2->MaxTargets;
1689   Controller->MemorySize = Enquiry2->MemorySize >> 20;
1690   Controller->V1.SAFTE_EnclosureManagementEnabled =
1691     (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
1692   /*
1693     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1694     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1695     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1696     less than the Controller Queue Depth to allow for an automatic drive
1697     rebuild operation.
1698   */
1699   Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
1700   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1701   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1702     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1703   Controller->LogicalDriveCount =
1704     Controller->V1.Enquiry.NumberOfLogicalDrives;
1705   Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
1706   Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
1707   Controller->DriverScatterGatherLimit =
1708     Controller->ControllerScatterGatherLimit;
1709   if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
1710     Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
1711   /*
1712     Initialize the Stripe Size, Segment Size, and Geometry Translation.
1713   */
1714   Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
1715                               >> (10 - DAC960_BlockSizeBits);
1716   Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
1717                                >> (10 - DAC960_BlockSizeBits);
1718   switch (Config2->DriveGeometry)
1719     {
1720     case DAC960_V1_Geometry_128_32:
1721       Controller->V1.GeometryTranslationHeads = 128;
1722       Controller->V1.GeometryTranslationSectors = 32;
1723       break;
1724     case DAC960_V1_Geometry_255_63:
1725       Controller->V1.GeometryTranslationHeads = 255;
1726       Controller->V1.GeometryTranslationSectors = 63;
1727       break;
1728     default:
1729       free_dma_loaf(Controller->PCIDevice, &local_dma);
1730       return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
1731     }
1732   /*
1733     Initialize the Background Initialization Status.
1734   */
1735   if ((Controller->FirmwareVersion[0] == '4' &&
1736       strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
1737       (Controller->FirmwareVersion[0] == '5' &&
1738        strcmp(Controller->FirmwareVersion, "5.08") >= 0))
1739     {
1740       Controller->V1.BackgroundInitializationStatusSupported = true;
1741       DAC960_V1_ExecuteType3B(Controller,
1742                               DAC960_V1_BackgroundInitializationControl, 0x20,
1743                               Controller->
1744                                V1.BackgroundInitializationStatusDMA);
1745       memcpy(&Controller->V1.LastBackgroundInitializationStatus,
1746                 Controller->V1.BackgroundInitializationStatus,
1747                 sizeof(DAC960_V1_BackgroundInitializationStatus_T));
1748     }
1749   /*
1750     Initialize the Logical Drive Initially Accessible flag.
1751   */
1752   for (LogicalDriveNumber = 0;
1753        LogicalDriveNumber < Controller->LogicalDriveCount;
1754        LogicalDriveNumber++)
1755     if (Controller->V1.LogicalDriveInformation
1756                        [LogicalDriveNumber].LogicalDriveState !=
1757         DAC960_V1_LogicalDrive_Offline)
1758       Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
1759   Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
1760   free_dma_loaf(Controller->PCIDevice, &local_dma);
1761   return true;
1762 }
1763
1764
1765 /*
1766   DAC960_V2_ReadControllerConfiguration reads the Configuration Information
1767   from DAC960 V2 Firmware Controllers and initializes the Controller structure.
1768 */
1769
1770 static boolean DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
1771                                                      *Controller)
1772 {
1773   DAC960_V2_ControllerInfo_T *ControllerInfo =
1774                 &Controller->V2.ControllerInformation;
1775   unsigned short LogicalDeviceNumber = 0;
1776   int ModelNameLength;
1777
1778   /* Get data into dma-able area, then copy into permanant location */
1779   if (!DAC960_V2_NewControllerInfo(Controller))
1780     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
1781   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
1782                         sizeof(DAC960_V2_ControllerInfo_T));
1783
1784
1785   if (!DAC960_V2_GeneralInfo(Controller))
1786     return DAC960_Failure(Controller, "GET HEALTH STATUS");
1787
1788   /*
1789     Initialize the Controller Model Name and Full Model Name fields.
1790   */
1791   ModelNameLength = sizeof(ControllerInfo->ControllerName);
1792   if (ModelNameLength > sizeof(Controller->ModelName)-1)
1793     ModelNameLength = sizeof(Controller->ModelName)-1;
1794   memcpy(Controller->ModelName, ControllerInfo->ControllerName,
1795          ModelNameLength);
1796   ModelNameLength--;
1797   while (Controller->ModelName[ModelNameLength] == ' ' ||
1798          Controller->ModelName[ModelNameLength] == '\0')
1799     ModelNameLength--;
1800   Controller->ModelName[++ModelNameLength] = '\0';
1801   strcpy(Controller->FullModelName, "Mylex ");
1802   strcat(Controller->FullModelName, Controller->ModelName);
1803   /*
1804     Initialize the Controller Firmware Version field.
1805   */
1806   sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
1807           ControllerInfo->FirmwareMajorVersion,
1808           ControllerInfo->FirmwareMinorVersion,
1809           ControllerInfo->FirmwareTurnNumber);
1810   if (ControllerInfo->FirmwareMajorVersion == 6 &&
1811       ControllerInfo->FirmwareMinorVersion == 0 &&
1812       ControllerInfo->FirmwareTurnNumber < 1)
1813     {
1814       DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
1815                   Controller, Controller->FirmwareVersion);
1816       DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
1817                   Controller);
1818       DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
1819                   Controller);
1820     }
1821   /*
1822     Initialize the Controller Channels, Targets, and Memory Size.
1823   */
1824   Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
1825   Controller->Targets =
1826     ControllerInfo->MaximumTargetsPerChannel
1827                     [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
1828   Controller->MemorySize = ControllerInfo->MemorySizeMB;
1829   /*
1830     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1831     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1832     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1833     less than the Controller Queue Depth to allow for an automatic drive
1834     rebuild operation.
1835   */
1836   Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
1837   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1838   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1839     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1840   Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
1841   Controller->MaxBlocksPerCommand =
1842     ControllerInfo->MaximumDataTransferSizeInBlocks;
1843   Controller->ControllerScatterGatherLimit =
1844     ControllerInfo->MaximumScatterGatherEntries;
1845   Controller->DriverScatterGatherLimit =
1846     Controller->ControllerScatterGatherLimit;
1847   if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
1848     Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
1849   /*
1850     Initialize the Logical Device Information.
1851   */
1852   while (true)
1853     {
1854       DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
1855         Controller->V2.NewLogicalDeviceInformation;
1856       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
1857       DAC960_V2_PhysicalDevice_T PhysicalDevice;
1858
1859       if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
1860         break;
1861       LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
1862       if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
1863         DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
1864                        Controller, LogicalDeviceNumber);
1865                 break;
1866       }
1867       if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
1868         DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
1869               Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
1870         LogicalDeviceNumber++;
1871         continue;
1872       }
1873       PhysicalDevice.Controller = 0;
1874       PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
1875       PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
1876       PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
1877       Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
1878         PhysicalDevice;
1879       if (NewLogicalDeviceInfo->LogicalDeviceState !=
1880           DAC960_V2_LogicalDevice_Offline)
1881         Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
1882       LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *)
1883         kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC);
1884       if (LogicalDeviceInfo == NULL)
1885         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1886       Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
1887         LogicalDeviceInfo;
1888       memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
1889              sizeof(DAC960_V2_LogicalDeviceInfo_T));
1890       LogicalDeviceNumber++;
1891     }
1892   return true;
1893 }
1894
1895
1896 /*
1897   DAC960_ReportControllerConfiguration reports the Configuration Information
1898   for Controller.
1899 */
1900
1901 static boolean DAC960_ReportControllerConfiguration(DAC960_Controller_T
1902                                                     *Controller)
1903 {
1904   DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
1905               Controller, Controller->ModelName);
1906   DAC960_Info("  Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
1907               Controller, Controller->FirmwareVersion,
1908               Controller->Channels, Controller->MemorySize);
1909   DAC960_Info("  PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
1910               Controller, Controller->Bus,
1911               Controller->Device, Controller->Function);
1912   if (Controller->IO_Address == 0)
1913     DAC960_Info("Unassigned\n", Controller);
1914   else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
1915   DAC960_Info("  PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
1916               Controller, Controller->PCI_Address,
1917               (unsigned long) Controller->BaseAddress,
1918               Controller->IRQ_Channel);
1919   DAC960_Info("  Controller Queue Depth: %d, "
1920               "Maximum Blocks per Command: %d\n",
1921               Controller, Controller->ControllerQueueDepth,
1922               Controller->MaxBlocksPerCommand);
1923   DAC960_Info("  Driver Queue Depth: %d, "
1924               "Scatter/Gather Limit: %d of %d Segments\n",
1925               Controller, Controller->DriverQueueDepth,
1926               Controller->DriverScatterGatherLimit,
1927               Controller->ControllerScatterGatherLimit);
1928   if (Controller->FirmwareType == DAC960_V1_Controller)
1929     {
1930       DAC960_Info("  Stripe Size: %dKB, Segment Size: %dKB, "
1931                   "BIOS Geometry: %d/%d\n", Controller,
1932                   Controller->V1.StripeSize,
1933                   Controller->V1.SegmentSize,
1934                   Controller->V1.GeometryTranslationHeads,
1935                   Controller->V1.GeometryTranslationSectors);
1936       if (Controller->V1.SAFTE_EnclosureManagementEnabled)
1937         DAC960_Info("  SAF-TE Enclosure Management Enabled\n", Controller);
1938     }
1939   return true;
1940 }
1941
1942
1943 /*
1944   DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
1945   for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
1946   Inquiry Unit Serial Number information for each device connected to
1947   Controller.
1948 */
1949
1950 static boolean DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
1951                                                  *Controller)
1952 {
1953   struct dma_loaf local_dma;
1954
1955   dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
1956   DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
1957
1958   dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
1959   DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
1960
1961   dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
1962   DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
1963
1964   struct completion Completions[DAC960_V1_MaxChannels];
1965   unsigned long flags;
1966   int Channel, TargetID;
1967
1968   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1969                 DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
1970                         sizeof(DAC960_SCSI_Inquiry_T) +
1971                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
1972      return DAC960_Failure(Controller,
1973                         "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
1974
1975   for (Channel = 0; Channel < Controller->Channels; Channel++) {
1976         DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
1977                         sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
1978         SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
1979                         sizeof(DAC960_SCSI_Inquiry_T),
1980                         SCSI_Inquiry_dma + Channel);
1981         SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
1982                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1983                         SCSI_NewInquiryUnitSerialNumberDMA + Channel);
1984   }
1985
1986   for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
1987     {
1988       /*
1989        * For each channel, submit a probe for a device on that channel.
1990        * The timeout interval for a device that is present is 10 seconds.
1991        * With this approach, the timeout periods can elapse in parallel
1992        * on each channel.
1993        */
1994       for (Channel = 0; Channel < Controller->Channels; Channel++)
1995         {
1996           dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
1997           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
1998           dma_addr_t DCDB_dma = DCDBs_dma[Channel];
1999           DAC960_Command_T *Command = Controller->Commands[Channel];
2000           struct completion *Completion = &Completions[Channel];
2001
2002           init_completion(Completion);
2003           DAC960_V1_ClearCommand(Command);
2004           Command->CommandType = DAC960_ImmediateCommand;
2005           Command->Completion = Completion;
2006           Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
2007           Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
2008           DCDB->Channel = Channel;
2009           DCDB->TargetID = TargetID;
2010           DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
2011           DCDB->EarlyStatus = false;
2012           DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
2013           DCDB->NoAutomaticRequestSense = false;
2014           DCDB->DisconnectPermitted = true;
2015           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
2016           DCDB->BusAddress = NewInquiryStandardDataDMA;
2017           DCDB->CDBLength = 6;
2018           DCDB->TransferLengthHigh4 = 0;
2019           DCDB->SenseLength = sizeof(DCDB->SenseData);
2020           DCDB->CDB[0] = 0x12; /* INQUIRY */
2021           DCDB->CDB[1] = 0; /* EVPD = 0 */
2022           DCDB->CDB[2] = 0; /* Page Code */
2023           DCDB->CDB[3] = 0; /* Reserved */
2024           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
2025           DCDB->CDB[5] = 0; /* Control */
2026
2027           spin_lock_irqsave(&Controller->queue_lock, flags);
2028           DAC960_QueueCommand(Command);
2029           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2030         }
2031       /*
2032        * Wait for the problems submitted in the previous loop
2033        * to complete.  On the probes that are successful,
2034        * get the serial number of the device that was found.
2035        */
2036       for (Channel = 0; Channel < Controller->Channels; Channel++)
2037         {
2038           DAC960_SCSI_Inquiry_T *InquiryStandardData =
2039             &Controller->V1.InquiryStandardData[Channel][TargetID];
2040           DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
2041           dma_addr_t NewInquiryUnitSerialNumberDMA =
2042                         SCSI_NewInquiryUnitSerialNumberDMA[Channel];
2043           DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2044                         SCSI_NewInquiryUnitSerialNumberCPU[Channel];
2045           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2046             &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2047           DAC960_Command_T *Command = Controller->Commands[Channel];
2048           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2049           struct completion *Completion = &Completions[Channel];
2050
2051           wait_for_completion(Completion);
2052
2053           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2054             memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
2055             InquiryStandardData->PeripheralDeviceType = 0x1F;
2056             continue;
2057           } else
2058             memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
2059
2060           /* Preserve Channel and TargetID values from the previous loop */
2061           Command->Completion = Completion;
2062           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2063           DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
2064           DCDB->SenseLength = sizeof(DCDB->SenseData);
2065           DCDB->CDB[0] = 0x12; /* INQUIRY */
2066           DCDB->CDB[1] = 1; /* EVPD = 1 */
2067           DCDB->CDB[2] = 0x80; /* Page Code */
2068           DCDB->CDB[3] = 0; /* Reserved */
2069           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2070           DCDB->CDB[5] = 0; /* Control */
2071
2072           spin_lock_irqsave(&Controller->queue_lock, flags);
2073           DAC960_QueueCommand(Command);
2074           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2075           wait_for_completion(Completion);
2076
2077           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2078                 memset(InquiryUnitSerialNumber, 0,
2079                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2080                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2081           } else
2082                 memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2083                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2084         }
2085     }
2086     free_dma_loaf(Controller->PCIDevice, &local_dma);
2087   return true;
2088 }
2089
2090
2091 /*
2092   DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
2093   for DAC960 V2 Firmware Controllers by requesting the Physical Device
2094   Information and SCSI Inquiry Unit Serial Number information for each
2095   device connected to Controller.
2096 */
2097
2098 static boolean DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
2099                                                  *Controller)
2100 {
2101   unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
2102   unsigned short PhysicalDeviceIndex = 0;
2103
2104   while (true)
2105     {
2106       DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
2107                 Controller->V2.NewPhysicalDeviceInformation;
2108       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
2109       DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2110                 Controller->V2.NewInquiryUnitSerialNumber;
2111       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
2112
2113       if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
2114           break;
2115
2116       PhysicalDeviceInfo = (DAC960_V2_PhysicalDeviceInfo_T *)
2117                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
2118       if (PhysicalDeviceInfo == NULL)
2119                 return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
2120       Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
2121                 PhysicalDeviceInfo;
2122       memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
2123                 sizeof(DAC960_V2_PhysicalDeviceInfo_T));
2124
2125       InquiryUnitSerialNumber = (DAC960_SCSI_Inquiry_UnitSerialNumber_T *)
2126         kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
2127       if (InquiryUnitSerialNumber == NULL) {
2128         kfree(PhysicalDeviceInfo);
2129         return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
2130       }
2131       Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
2132                 InquiryUnitSerialNumber;
2133
2134       Channel = NewPhysicalDeviceInfo->Channel;
2135       TargetID = NewPhysicalDeviceInfo->TargetID;
2136       LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
2137
2138       /*
2139          Some devices do NOT have Unit Serial Numbers.
2140          This command fails for them.  But, we still want to
2141          remember those devices are there.  Construct a
2142          UnitSerialNumber structure for the failure case.
2143       */
2144       if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
2145         memset(InquiryUnitSerialNumber, 0,
2146              sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2147         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2148       } else
2149         memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2150                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2151
2152       PhysicalDeviceIndex++;
2153       LogicalUnit++;
2154     }
2155   return true;
2156 }
2157
2158
2159 /*
2160   DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
2161   Product Serial Number fields of the Inquiry Standard Data and Inquiry
2162   Unit Serial Number structures.
2163 */
2164
2165 static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
2166                                          *InquiryStandardData,
2167                                        DAC960_SCSI_Inquiry_UnitSerialNumber_T
2168                                          *InquiryUnitSerialNumber,
2169                                        unsigned char *Vendor,
2170                                        unsigned char *Model,
2171                                        unsigned char *Revision,
2172                                        unsigned char *SerialNumber)
2173 {
2174   int SerialNumberLength, i;
2175   if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
2176   for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
2177     {
2178       unsigned char VendorCharacter =
2179         InquiryStandardData->VendorIdentification[i];
2180       Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
2181                    ? VendorCharacter : ' ');
2182     }
2183   Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
2184   for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
2185     {
2186       unsigned char ModelCharacter =
2187         InquiryStandardData->ProductIdentification[i];
2188       Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
2189                   ? ModelCharacter : ' ');
2190     }
2191   Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
2192   for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
2193     {
2194       unsigned char RevisionCharacter =
2195         InquiryStandardData->ProductRevisionLevel[i];
2196       Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
2197                      ? RevisionCharacter : ' ');
2198     }
2199   Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
2200   if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
2201   SerialNumberLength = InquiryUnitSerialNumber->PageLength;
2202   if (SerialNumberLength >
2203       sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
2204     SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
2205   for (i = 0; i < SerialNumberLength; i++)
2206     {
2207       unsigned char SerialNumberCharacter =
2208         InquiryUnitSerialNumber->ProductSerialNumber[i];
2209       SerialNumber[i] =
2210         (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
2211          ? SerialNumberCharacter : ' ');
2212     }
2213   SerialNumber[SerialNumberLength] = '\0';
2214 }
2215
2216
2217 /*
2218   DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
2219   Information for DAC960 V1 Firmware Controllers.
2220 */
2221
2222 static boolean DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
2223                                                    *Controller)
2224 {
2225   int LogicalDriveNumber, Channel, TargetID;
2226   DAC960_Info("  Physical Devices:\n", Controller);
2227   for (Channel = 0; Channel < Controller->Channels; Channel++)
2228     for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2229       {
2230         DAC960_SCSI_Inquiry_T *InquiryStandardData =
2231           &Controller->V1.InquiryStandardData[Channel][TargetID];
2232         DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2233           &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2234         DAC960_V1_DeviceState_T *DeviceState =
2235           &Controller->V1.DeviceState[Channel][TargetID];
2236         DAC960_V1_ErrorTableEntry_T *ErrorEntry =
2237           &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
2238         char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2239         char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2240         char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2241         char SerialNumber[1+sizeof(InquiryUnitSerialNumber
2242                                    ->ProductSerialNumber)];
2243         if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
2244         DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2245                                    Vendor, Model, Revision, SerialNumber);
2246         DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2247                     Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
2248                     Vendor, Model, Revision);
2249         if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2250           DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2251         if (DeviceState->Present &&
2252             DeviceState->DeviceType == DAC960_V1_DiskType)
2253           {
2254             if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
2255               DAC960_Info("         Disk Status: %s, %u blocks, %d resets\n",
2256                           Controller,
2257                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2258                            ? "Dead"
2259                            : DeviceState->DeviceState
2260                              == DAC960_V1_Device_WriteOnly
2261                              ? "Write-Only"
2262                              : DeviceState->DeviceState
2263                                == DAC960_V1_Device_Online
2264                                ? "Online" : "Standby"),
2265                           DeviceState->DiskSize,
2266                           Controller->V1.DeviceResetCount[Channel][TargetID]);
2267             else
2268               DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2269                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2270                            ? "Dead"
2271                            : DeviceState->DeviceState
2272                              == DAC960_V1_Device_WriteOnly
2273                              ? "Write-Only"
2274                              : DeviceState->DeviceState
2275                                == DAC960_V1_Device_Online
2276                                ? "Online" : "Standby"),
2277                           DeviceState->DiskSize);
2278           }
2279         if (ErrorEntry->ParityErrorCount > 0 ||
2280             ErrorEntry->SoftErrorCount > 0 ||
2281             ErrorEntry->HardErrorCount > 0 ||
2282             ErrorEntry->MiscErrorCount > 0)
2283           DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2284                       "Hard: %d, Misc: %d\n", Controller,
2285                       ErrorEntry->ParityErrorCount,
2286                       ErrorEntry->SoftErrorCount,
2287                       ErrorEntry->HardErrorCount,
2288                       ErrorEntry->MiscErrorCount);
2289       }
2290   DAC960_Info("  Logical Drives:\n", Controller);
2291   for (LogicalDriveNumber = 0;
2292        LogicalDriveNumber < Controller->LogicalDriveCount;
2293        LogicalDriveNumber++)
2294     {
2295       DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
2296         &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
2297       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
2298                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2299                   LogicalDriveInformation->RAIDLevel,
2300                   (LogicalDriveInformation->LogicalDriveState
2301                    == DAC960_V1_LogicalDrive_Online
2302                    ? "Online"
2303                    : LogicalDriveInformation->LogicalDriveState
2304                      == DAC960_V1_LogicalDrive_Critical
2305                      ? "Critical" : "Offline"),
2306                   LogicalDriveInformation->LogicalDriveSize,
2307                   (LogicalDriveInformation->WriteBack
2308                    ? "Write Back" : "Write Thru"));
2309     }
2310   return true;
2311 }
2312
2313
2314 /*
2315   DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
2316   Information for DAC960 V2 Firmware Controllers.
2317 */
2318
2319 static boolean DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
2320                                                    *Controller)
2321 {
2322   int PhysicalDeviceIndex, LogicalDriveNumber;
2323   DAC960_Info("  Physical Devices:\n", Controller);
2324   for (PhysicalDeviceIndex = 0;
2325        PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
2326        PhysicalDeviceIndex++)
2327     {
2328       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
2329         Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
2330       DAC960_SCSI_Inquiry_T *InquiryStandardData =
2331         (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
2332       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2333         Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
2334       char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2335       char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2336       char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2337       char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
2338       if (PhysicalDeviceInfo == NULL) break;
2339       DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2340                                  Vendor, Model, Revision, SerialNumber);
2341       DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2342                   Controller,
2343                   PhysicalDeviceInfo->Channel,
2344                   PhysicalDeviceInfo->TargetID,
2345                   (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
2346                   Vendor, Model, Revision);
2347       if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
2348         DAC960_Info("         %sAsynchronous\n", Controller,
2349                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2350                      ? "Wide " :""));
2351       else
2352         DAC960_Info("         %sSynchronous at %d MB/sec\n", Controller,
2353                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2354                      ? "Wide " :""),
2355                     (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
2356                      * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
2357       if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2358         DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2359       if (PhysicalDeviceInfo->PhysicalDeviceState ==
2360           DAC960_V2_Device_Unconfigured)
2361         continue;
2362       DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2363                   (PhysicalDeviceInfo->PhysicalDeviceState
2364                    == DAC960_V2_Device_Online
2365                    ? "Online"
2366                    : PhysicalDeviceInfo->PhysicalDeviceState
2367                      == DAC960_V2_Device_Rebuild
2368                      ? "Rebuild"
2369                      : PhysicalDeviceInfo->PhysicalDeviceState
2370                        == DAC960_V2_Device_Missing
2371                        ? "Missing"
2372                        : PhysicalDeviceInfo->PhysicalDeviceState
2373                          == DAC960_V2_Device_Critical
2374                          ? "Critical"
2375                          : PhysicalDeviceInfo->PhysicalDeviceState
2376                            == DAC960_V2_Device_Dead
2377                            ? "Dead"
2378                            : PhysicalDeviceInfo->PhysicalDeviceState
2379                              == DAC960_V2_Device_SuspectedDead
2380                              ? "Suspected-Dead"
2381                              : PhysicalDeviceInfo->PhysicalDeviceState
2382                                == DAC960_V2_Device_CommandedOffline
2383                                ? "Commanded-Offline"
2384                                : PhysicalDeviceInfo->PhysicalDeviceState
2385                                  == DAC960_V2_Device_Standby
2386                                  ? "Standby" : "Unknown"),
2387                   PhysicalDeviceInfo->ConfigurableDeviceSize);
2388       if (PhysicalDeviceInfo->ParityErrors == 0 &&
2389           PhysicalDeviceInfo->SoftErrors == 0 &&
2390           PhysicalDeviceInfo->HardErrors == 0 &&
2391           PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
2392           PhysicalDeviceInfo->CommandTimeouts == 0 &&
2393           PhysicalDeviceInfo->Retries == 0 &&
2394           PhysicalDeviceInfo->Aborts == 0 &&
2395           PhysicalDeviceInfo->PredictedFailuresDetected == 0)
2396         continue;
2397       DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2398                   "Hard: %d, Misc: %d\n", Controller,
2399                   PhysicalDeviceInfo->ParityErrors,
2400                   PhysicalDeviceInfo->SoftErrors,
2401                   PhysicalDeviceInfo->HardErrors,
2402                   PhysicalDeviceInfo->MiscellaneousErrors);
2403       DAC960_Info("                  Timeouts: %d, Retries: %d, "
2404                   "Aborts: %d, Predicted: %d\n", Controller,
2405                   PhysicalDeviceInfo->CommandTimeouts,
2406                   PhysicalDeviceInfo->Retries,
2407                   PhysicalDeviceInfo->Aborts,
2408                   PhysicalDeviceInfo->PredictedFailuresDetected);
2409     }
2410   DAC960_Info("  Logical Drives:\n", Controller);
2411   for (LogicalDriveNumber = 0;
2412        LogicalDriveNumber < DAC960_MaxLogicalDrives;
2413        LogicalDriveNumber++)
2414     {
2415       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
2416         Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
2417       unsigned char *ReadCacheStatus[] = { "Read Cache Disabled",
2418                                            "Read Cache Enabled",
2419                                            "Read Ahead Enabled",
2420                                            "Intelligent Read Ahead Enabled",
2421                                            "-", "-", "-", "-" };
2422       unsigned char *WriteCacheStatus[] = { "Write Cache Disabled",
2423                                             "Logical Device Read Only",
2424                                             "Write Cache Enabled",
2425                                             "Intelligent Write Cache Enabled",
2426                                             "-", "-", "-", "-" };
2427       unsigned char *GeometryTranslation;
2428       if (LogicalDeviceInfo == NULL) continue;
2429       switch (LogicalDeviceInfo->DriveGeometry)
2430         {
2431         case DAC960_V2_Geometry_128_32:
2432           GeometryTranslation = "128/32";
2433           break;
2434         case DAC960_V2_Geometry_255_63:
2435           GeometryTranslation = "255/63";
2436           break;
2437         default:
2438           GeometryTranslation = "Invalid";
2439           DAC960_Error("Illegal Logical Device Geometry %d\n",
2440                        Controller, LogicalDeviceInfo->DriveGeometry);
2441           break;
2442         }
2443       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
2444                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2445                   LogicalDeviceInfo->RAIDLevel,
2446                   (LogicalDeviceInfo->LogicalDeviceState
2447                    == DAC960_V2_LogicalDevice_Online
2448                    ? "Online"
2449                    : LogicalDeviceInfo->LogicalDeviceState
2450                      == DAC960_V2_LogicalDevice_Critical
2451                      ? "Critical" : "Offline"),
2452                   LogicalDeviceInfo->ConfigurableDeviceSize);
2453       DAC960_Info("                  Logical Device %s, BIOS Geometry: %s\n",
2454                   Controller,
2455                   (LogicalDeviceInfo->LogicalDeviceControl
2456                                      .LogicalDeviceInitialized
2457                    ? "Initialized" : "Uninitialized"),
2458                   GeometryTranslation);
2459       if (LogicalDeviceInfo->StripeSize == 0)
2460         {
2461           if (LogicalDeviceInfo->CacheLineSize == 0)
2462             DAC960_Info("                  Stripe Size: N/A, "
2463                         "Segment Size: N/A\n", Controller);
2464           else
2465             DAC960_Info("                  Stripe Size: N/A, "
2466                         "Segment Size: %dKB\n", Controller,
2467                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2468         }
2469       else
2470         {
2471           if (LogicalDeviceInfo->CacheLineSize == 0)
2472             DAC960_Info("                  Stripe Size: %dKB, "
2473                         "Segment Size: N/A\n", Controller,
2474                         1 << (LogicalDeviceInfo->StripeSize - 2));
2475           else
2476             DAC960_Info("                  Stripe Size: %dKB, "
2477                         "Segment Size: %dKB\n", Controller,
2478                         1 << (LogicalDeviceInfo->StripeSize - 2),
2479                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2480         }
2481       DAC960_Info("                  %s, %s\n", Controller,
2482                   ReadCacheStatus[
2483                     LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
2484                   WriteCacheStatus[
2485                     LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
2486       if (LogicalDeviceInfo->SoftErrors > 0 ||
2487           LogicalDeviceInfo->CommandsFailed > 0 ||
2488           LogicalDeviceInfo->DeferredWriteErrors)
2489         DAC960_Info("                  Errors - Soft: %d, Failed: %d, "
2490                     "Deferred Write: %d\n", Controller,
2491                     LogicalDeviceInfo->SoftErrors,
2492                     LogicalDeviceInfo->CommandsFailed,
2493                     LogicalDeviceInfo->DeferredWriteErrors);
2494
2495     }
2496   return true;
2497 }
2498
2499 /*
2500   DAC960_RegisterBlockDevice registers the Block Device structures
2501   associated with Controller.
2502 */
2503
2504 static boolean DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
2505 {
2506   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2507   int n;
2508
2509   /*
2510     Register the Block Device Major Number for this DAC960 Controller.
2511   */
2512   if (register_blkdev(MajorNumber, "dac960") < 0)
2513       return false;
2514
2515   for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
2516         struct gendisk *disk = Controller->disks[n];
2517         struct request_queue *RequestQueue;
2518
2519         /* for now, let all request queues share controller's lock */
2520         RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
2521         if (!RequestQueue) {
2522                 printk("DAC960: failure to allocate request queue\n");
2523                 continue;
2524         }
2525         Controller->RequestQueue[n] = RequestQueue;
2526         blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
2527         RequestQueue->queuedata = Controller;
2528         blk_queue_max_hw_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2529         blk_queue_max_phys_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2530         blk_queue_max_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
2531         disk->queue = RequestQueue;
2532         sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
2533         disk->major = MajorNumber;
2534         disk->first_minor = n << DAC960_MaxPartitionsBits;
2535         disk->fops = &DAC960_BlockDeviceOperations;
2536    }
2537   /*
2538     Indicate the Block Device Registration completed successfully,
2539   */
2540   return true;
2541 }
2542
2543
2544 /*
2545   DAC960_UnregisterBlockDevice unregisters the Block Device structures
2546   associated with Controller.
2547 */
2548
2549 static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
2550 {
2551   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2552   int disk;
2553
2554   /* does order matter when deleting gendisk and cleanup in request queue? */
2555   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
2556         del_gendisk(Controller->disks[disk]);
2557         blk_cleanup_queue(Controller->RequestQueue[disk]);
2558         Controller->RequestQueue[disk] = NULL;
2559   }
2560
2561   /*
2562     Unregister the Block Device Major Number for this DAC960 Controller.
2563   */
2564   unregister_blkdev(MajorNumber, "dac960");
2565 }
2566
2567 /*
2568   DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
2569   Information Partition Sector Counts and Block Sizes.
2570 */
2571
2572 static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
2573 {
2574         int disk;
2575         for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
2576                 set_capacity(Controller->disks[disk], disk_size(Controller, disk));
2577 }
2578
2579 /*
2580   DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
2581   the Error Status Register when the driver performs the BIOS handshaking.
2582   It returns true for fatal errors and false otherwise.
2583 */
2584
2585 static boolean DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
2586                                         unsigned char ErrorStatus,
2587                                         unsigned char Parameter0,
2588                                         unsigned char Parameter1)
2589 {
2590   switch (ErrorStatus)
2591     {
2592     case 0x00:
2593       DAC960_Notice("Physical Device %d:%d Not Responding\n",
2594                     Controller, Parameter1, Parameter0);
2595       break;
2596     case 0x08:
2597       if (Controller->DriveSpinUpMessageDisplayed) break;
2598       DAC960_Notice("Spinning Up Drives\n", Controller);
2599       Controller->DriveSpinUpMessageDisplayed = true;
2600       break;
2601     case 0x30:
2602       DAC960_Notice("Configuration Checksum Error\n", Controller);
2603       break;
2604     case 0x60:
2605       DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
2606       break;
2607     case 0x70:
2608       DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
2609       break;
2610     case 0x90:
2611       DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
2612                     Controller, Parameter1, Parameter0);
2613       break;
2614     case 0xA0:
2615       DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
2616       break;
2617     case 0xB0:
2618       DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
2619       break;
2620     case 0xD0:
2621       DAC960_Notice("New Controller Configuration Found\n", Controller);
2622       break;
2623     case 0xF0:
2624       DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
2625       return true;
2626     default:
2627       DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
2628                    Controller, ErrorStatus);
2629       return true;
2630     }
2631   return false;
2632 }
2633
2634
2635 /*
2636  * DAC960_DetectCleanup releases the resources that were allocated
2637  * during DAC960_DetectController().  DAC960_DetectController can
2638  * has several internal failure points, so not ALL resources may
2639  * have been allocated.  It's important to free only
2640  * resources that HAVE been allocated.  The code below always
2641  * tests that the resource has been allocated before attempting to
2642  * free it.
2643  */
2644 static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
2645 {
2646   int i;
2647
2648   /* Free the memory mailbox, status, and related structures */
2649   free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
2650   if (Controller->MemoryMappedAddress) {
2651         switch(Controller->HardwareType)
2652         {
2653                 case DAC960_GEM_Controller:
2654                         DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
2655                         break;
2656                 case DAC960_BA_Controller:
2657                         DAC960_BA_DisableInterrupts(Controller->BaseAddress);
2658                         break;
2659                 case DAC960_LP_Controller:
2660                         DAC960_LP_DisableInterrupts(Controller->BaseAddress);
2661                         break;
2662                 case DAC960_LA_Controller:
2663                         DAC960_LA_DisableInterrupts(Controller->BaseAddress);
2664                         break;
2665                 case DAC960_PG_Controller:
2666                         DAC960_PG_DisableInterrupts(Controller->BaseAddress);
2667                         break;
2668                 case DAC960_PD_Controller:
2669                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2670                         break;
2671                 case DAC960_P_Controller:
2672                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2673                         break;
2674         }
2675         iounmap(Controller->MemoryMappedAddress);
2676   }
2677   if (Controller->IRQ_Channel)
2678         free_irq(Controller->IRQ_Channel, Controller);
2679   if (Controller->IO_Address)
2680         release_region(Controller->IO_Address, 0x80);
2681   pci_disable_device(Controller->PCIDevice);
2682   for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
2683        put_disk(Controller->disks[i]);
2684   DAC960_Controllers[Controller->ControllerNumber] = NULL;
2685   kfree(Controller);
2686 }
2687
2688
2689 /*
2690   DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
2691   PCI RAID Controllers by interrogating the PCI Configuration Space for
2692   Controller Type.
2693 */
2694
2695 static DAC960_Controller_T *
2696 DAC960_DetectController(struct pci_dev *PCI_Device,
2697                         const struct pci_device_id *entry)
2698 {
2699   struct DAC960_privdata *privdata =
2700                 (struct DAC960_privdata *)entry->driver_data;
2701   irq_handler_t InterruptHandler = privdata->InterruptHandler;
2702   unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
2703   DAC960_Controller_T *Controller = NULL;
2704   unsigned char DeviceFunction = PCI_Device->devfn;
2705   unsigned char ErrorStatus, Parameter0, Parameter1;
2706   unsigned int IRQ_Channel;
2707   void __iomem *BaseAddress;
2708   int i;
2709
2710   Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
2711   if (Controller == NULL) {
2712         DAC960_Error("Unable to allocate Controller structure for "
2713                        "Controller at\n", NULL);
2714         return NULL;
2715   }
2716   Controller->ControllerNumber = DAC960_ControllerCount;
2717   DAC960_Controllers[DAC960_ControllerCount++] = Controller;
2718   Controller->Bus = PCI_Device->bus->number;
2719   Controller->FirmwareType = privdata->FirmwareType;
2720   Controller->HardwareType = privdata->HardwareType;
2721   Controller->Device = DeviceFunction >> 3;
2722   Controller->Function = DeviceFunction & 0x7;
2723   Controller->PCIDevice = PCI_Device;
2724   strcpy(Controller->FullModelName, "DAC960");
2725
2726   if (pci_enable_device(PCI_Device))
2727         goto Failure;
2728
2729   switch (Controller->HardwareType)
2730   {
2731         case DAC960_GEM_Controller:
2732           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2733           break;
2734         case DAC960_BA_Controller:
2735           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2736           break;
2737         case DAC960_LP_Controller:
2738           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2739           break;
2740         case DAC960_LA_Controller:
2741           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2742           break;
2743         case DAC960_PG_Controller:
2744           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2745           break;
2746         case DAC960_PD_Controller:
2747           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2748           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2749           break;
2750         case DAC960_P_Controller:
2751           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2752           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2753           break;
2754   }
2755
2756   pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
2757   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
2758         Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
2759         if (!Controller->disks[i])
2760                 goto Failure;
2761         Controller->disks[i]->private_data = (void *)((long)i);
2762   }
2763   init_waitqueue_head(&Controller->CommandWaitQueue);
2764   init_waitqueue_head(&Controller->HealthStatusWaitQueue);
2765   spin_lock_init(&Controller->queue_lock);
2766   DAC960_AnnounceDriver(Controller);
2767   /*
2768     Map the Controller Register Window.
2769   */
2770  if (MemoryWindowSize < PAGE_SIZE)
2771         MemoryWindowSize = PAGE_SIZE;
2772   Controller->MemoryMappedAddress =
2773         ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
2774   Controller->BaseAddress =
2775         Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
2776   if (Controller->MemoryMappedAddress == NULL)
2777   {
2778           DAC960_Error("Unable to map Controller Register Window for "
2779                        "Controller at\n", Controller);
2780           goto Failure;
2781   }
2782   BaseAddress = Controller->BaseAddress;
2783   switch (Controller->HardwareType)
2784   {
2785         case DAC960_GEM_Controller:
2786           DAC960_GEM_DisableInterrupts(BaseAddress);
2787           DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
2788           udelay(1000);
2789           while (DAC960_GEM_InitializationInProgressP(BaseAddress))
2790             {
2791               if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
2792                                             &Parameter0, &Parameter1) &&
2793                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2794                                            Parameter0, Parameter1))
2795                 goto Failure;
2796               udelay(10);
2797             }
2798           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2799             {
2800               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2801                            "for Controller at\n", Controller);
2802               goto Failure;
2803             }
2804           DAC960_GEM_EnableInterrupts(BaseAddress);
2805           Controller->QueueCommand = DAC960_GEM_QueueCommand;
2806           Controller->ReadControllerConfiguration =
2807             DAC960_V2_ReadControllerConfiguration;
2808           Controller->ReadDeviceConfiguration =
2809             DAC960_V2_ReadDeviceConfiguration;
2810           Controller->ReportDeviceConfiguration =
2811             DAC960_V2_ReportDeviceConfiguration;
2812           Controller->QueueReadWriteCommand =
2813             DAC960_V2_QueueReadWriteCommand;
2814           break;
2815         case DAC960_BA_Controller:
2816           DAC960_BA_DisableInterrupts(BaseAddress);
2817           DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2818           udelay(1000);
2819           while (DAC960_BA_InitializationInProgressP(BaseAddress))
2820             {
2821               if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2822                                             &Parameter0, &Parameter1) &&
2823                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2824                                            Parameter0, Parameter1))
2825                 goto Failure;
2826               udelay(10);
2827             }
2828           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2829             {
2830               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2831                            "for Controller at\n", Controller);
2832               goto Failure;
2833             }
2834           DAC960_BA_EnableInterrupts(BaseAddress);
2835           Controller->QueueCommand = DAC960_BA_QueueCommand;
2836           Controller->ReadControllerConfiguration =
2837             DAC960_V2_ReadControllerConfiguration;
2838           Controller->ReadDeviceConfiguration =
2839             DAC960_V2_ReadDeviceConfiguration;
2840           Controller->ReportDeviceConfiguration =
2841             DAC960_V2_ReportDeviceConfiguration;
2842           Controller->QueueReadWriteCommand =
2843             DAC960_V2_QueueReadWriteCommand;
2844           break;
2845         case DAC960_LP_Controller:
2846           DAC960_LP_DisableInterrupts(BaseAddress);
2847           DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
2848           udelay(1000);
2849           while (DAC960_LP_InitializationInProgressP(BaseAddress))
2850             {
2851               if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
2852                                             &Parameter0, &Parameter1) &&
2853                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2854                                            Parameter0, Parameter1))
2855                 goto Failure;
2856               udelay(10);
2857             }
2858           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2859             {
2860               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2861                            "for Controller at\n", Controller);
2862               goto Failure;
2863             }
2864           DAC960_LP_EnableInterrupts(BaseAddress);
2865           Controller->QueueCommand = DAC960_LP_QueueCommand;
2866           Controller->ReadControllerConfiguration =
2867             DAC960_V2_ReadControllerConfiguration;
2868           Controller->ReadDeviceConfiguration =
2869             DAC960_V2_ReadDeviceConfiguration;
2870           Controller->ReportDeviceConfiguration =
2871             DAC960_V2_ReportDeviceConfiguration;
2872           Controller->QueueReadWriteCommand =
2873             DAC960_V2_QueueReadWriteCommand;
2874           break;
2875         case DAC960_LA_Controller:
2876           DAC960_LA_DisableInterrupts(BaseAddress);
2877           DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2878           udelay(1000);
2879           while (DAC960_LA_InitializationInProgressP(BaseAddress))
2880             {
2881               if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2882                                             &Parameter0, &Parameter1) &&
2883                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2884                                            Parameter0, Parameter1))
2885                 goto Failure;
2886               udelay(10);
2887             }
2888           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2889             {
2890               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2891                            "for Controller at\n", Controller);
2892               goto Failure;
2893             }
2894           DAC960_LA_EnableInterrupts(BaseAddress);
2895           if (Controller->V1.DualModeMemoryMailboxInterface)
2896             Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
2897           else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
2898           Controller->ReadControllerConfiguration =
2899             DAC960_V1_ReadControllerConfiguration;
2900           Controller->ReadDeviceConfiguration =
2901             DAC960_V1_ReadDeviceConfiguration;
2902           Controller->ReportDeviceConfiguration =
2903             DAC960_V1_ReportDeviceConfiguration;
2904           Controller->QueueReadWriteCommand =
2905             DAC960_V1_QueueReadWriteCommand;
2906           break;
2907         case DAC960_PG_Controller:
2908           DAC960_PG_DisableInterrupts(BaseAddress);
2909           DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
2910           udelay(1000);
2911           while (DAC960_PG_InitializationInProgressP(BaseAddress))
2912             {
2913               if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
2914                                             &Parameter0, &Parameter1) &&
2915                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2916                                            Parameter0, Parameter1))
2917                 goto Failure;
2918               udelay(10);
2919             }
2920           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2921             {
2922               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2923                            "for Controller at\n", Controller);
2924               goto Failure;
2925             }
2926           DAC960_PG_EnableInterrupts(BaseAddress);
2927           if (Controller->V1.DualModeMemoryMailboxInterface)
2928             Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
2929           else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
2930           Controller->ReadControllerConfiguration =
2931             DAC960_V1_ReadControllerConfiguration;
2932           Controller->ReadDeviceConfiguration =
2933             DAC960_V1_ReadDeviceConfiguration;
2934           Controller->ReportDeviceConfiguration =
2935             DAC960_V1_ReportDeviceConfiguration;
2936           Controller->QueueReadWriteCommand =
2937             DAC960_V1_QueueReadWriteCommand;
2938           break;
2939         case DAC960_PD_Controller:
2940           if (!request_region(Controller->IO_Address, 0x80,
2941                               Controller->FullModelName)) {
2942                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2943                              Controller, Controller->IO_Address);
2944                 goto Failure;
2945           }
2946           DAC960_PD_DisableInterrupts(BaseAddress);
2947           DAC960_PD_AcknowledgeStatus(BaseAddress);
2948           udelay(1000);
2949           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2950             {
2951               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2952                                             &Parameter0, &Parameter1) &&
2953                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2954                                            Parameter0, Parameter1))
2955                 goto Failure;
2956               udelay(10);
2957             }
2958           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2959             {
2960               DAC960_Error("Unable to allocate DMA mapped memory "
2961                            "for Controller at\n", Controller);
2962               goto Failure;
2963             }
2964           DAC960_PD_EnableInterrupts(BaseAddress);
2965           Controller->QueueCommand = DAC960_PD_QueueCommand;
2966           Controller->ReadControllerConfiguration =
2967             DAC960_V1_ReadControllerConfiguration;
2968           Controller->ReadDeviceConfiguration =
2969             DAC960_V1_ReadDeviceConfiguration;
2970           Controller->ReportDeviceConfiguration =
2971             DAC960_V1_ReportDeviceConfiguration;
2972           Controller->QueueReadWriteCommand =
2973             DAC960_V1_QueueReadWriteCommand;
2974           break;
2975         case DAC960_P_Controller:
2976           if (!request_region(Controller->IO_Address, 0x80,
2977                               Controller->FullModelName)){
2978                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2979                              Controller, Controller->IO_Address);
2980                 goto Failure;
2981           }
2982           DAC960_PD_DisableInterrupts(BaseAddress);
2983           DAC960_PD_AcknowledgeStatus(BaseAddress);
2984           udelay(1000);
2985           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2986             {
2987               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2988                                             &Parameter0, &Parameter1) &&
2989                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2990                                            Parameter0, Parameter1))
2991                 goto Failure;
2992               udelay(10);
2993             }
2994           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2995             {
2996               DAC960_Error("Unable to allocate DMA mapped memory"
2997                            "for Controller at\n", Controller);
2998               goto Failure;
2999             }
3000           DAC960_PD_EnableInterrupts(BaseAddress);
3001           Controller->QueueCommand = DAC960_P_QueueCommand;
3002           Controller->ReadControllerConfiguration =
3003             DAC960_V1_ReadControllerConfiguration;
3004           Controller->ReadDeviceConfiguration =
3005             DAC960_V1_ReadDeviceConfiguration;
3006           Controller->ReportDeviceConfiguration =
3007             DAC960_V1_ReportDeviceConfiguration;
3008           Controller->QueueReadWriteCommand =
3009             DAC960_V1_QueueReadWriteCommand;
3010           break;
3011   }
3012   /*
3013      Acquire shared access to the IRQ Channel.
3014   */
3015   IRQ_Channel = PCI_Device->irq;
3016   if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
3017                       Controller->FullModelName, Controller) < 0)
3018   {
3019         DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
3020                        Controller, Controller->IRQ_Channel);
3021         goto Failure;
3022   }
3023   Controller->IRQ_Channel = IRQ_Channel;
3024   Controller->InitialCommand.CommandIdentifier = 1;
3025   Controller->InitialCommand.Controller = Controller;
3026   Controller->Commands[0] = &Controller->InitialCommand;
3027   Controller->FreeCommands = &Controller->InitialCommand;
3028   return Controller;
3029
3030 Failure:
3031   if (Controller->IO_Address == 0)
3032         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
3033                      "PCI Address 0x%X\n", Controller,
3034                      Controller->Bus, Controller->Device,
3035                      Controller->Function, Controller->PCI_Address);
3036   else
3037         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
3038                         "0x%X PCI Address 0x%X\n", Controller,
3039                         Controller->Bus, Controller->Device,
3040                         Controller->Function, Controller->IO_Address,
3041                         Controller->PCI_Address);
3042   DAC960_DetectCleanup(Controller);
3043   DAC960_ControllerCount--;
3044   return NULL;
3045 }
3046
3047 /*
3048   DAC960_InitializeController initializes Controller.
3049 */
3050
3051 static boolean
3052 DAC960_InitializeController(DAC960_Controller_T *Controller)
3053 {
3054   if (DAC960_ReadControllerConfiguration(Controller) &&
3055       DAC960_ReportControllerConfiguration(Controller) &&
3056       DAC960_CreateAuxiliaryStructures(Controller) &&
3057       DAC960_ReadDeviceConfiguration(Controller) &&
3058       DAC960_ReportDeviceConfiguration(Controller) &&
3059       DAC960_RegisterBlockDevice(Controller))
3060     {
3061       /*
3062         Initialize the Monitoring Timer.
3063       */
3064       init_timer(&Controller->MonitoringTimer);
3065       Controller->MonitoringTimer.expires =
3066         jiffies + DAC960_MonitoringTimerInterval;
3067       Controller->MonitoringTimer.data = (unsigned long) Controller;
3068       Controller->MonitoringTimer.function = DAC960_MonitoringTimerFunction;
3069       add_timer(&Controller->MonitoringTimer);
3070       Controller->ControllerInitialized = true;
3071       return true;
3072     }
3073   return false;
3074 }
3075
3076
3077 /*
3078   DAC960_FinalizeController finalizes Controller.
3079 */
3080
3081 static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
3082 {
3083   if (Controller->ControllerInitialized)
3084     {
3085       unsigned long flags;
3086
3087       /*
3088        * Acquiring and releasing lock here eliminates
3089        * a very low probability race.
3090        *
3091        * The code below allocates controller command structures
3092        * from the free list without holding the controller lock.
3093        * This is safe assuming there is no other activity on
3094        * the controller at the time.
3095        *
3096        * But, there might be a monitoring command still
3097        * in progress.  Setting the Shutdown flag while holding
3098        * the lock ensures that there is no monitoring command
3099        * in the interrupt handler currently, and any monitoring
3100        * commands that complete from this time on will NOT return
3101        * their command structure to the free list.
3102        */
3103
3104       spin_lock_irqsave(&Controller->queue_lock, flags);
3105       Controller->ShutdownMonitoringTimer = 1;
3106       spin_unlock_irqrestore(&Controller->queue_lock, flags);
3107
3108       del_timer_sync(&Controller->MonitoringTimer);
3109       if (Controller->FirmwareType == DAC960_V1_Controller)
3110         {
3111           DAC960_Notice("Flushing Cache...", Controller);
3112           DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
3113           DAC960_Notice("done\n", Controller);
3114
3115           if (Controller->HardwareType == DAC960_PD_Controller)
3116               release_region(Controller->IO_Address, 0x80);
3117         }
3118       else
3119         {
3120           DAC960_Notice("Flushing Cache...", Controller);
3121           DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
3122                                     DAC960_V2_RAID_Controller);
3123           DAC960_Notice("done\n", Controller);
3124         }
3125     }
3126   DAC960_UnregisterBlockDevice(Controller);
3127   DAC960_DestroyAuxiliaryStructures(Controller);
3128   DAC960_DestroyProcEntries(Controller);
3129   DAC960_DetectCleanup(Controller);
3130 }
3131
3132
3133 /*
3134   DAC960_Probe verifies controller's existence and
3135   initializes the DAC960 Driver for that controller.
3136 */
3137
3138 static int
3139 DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
3140 {
3141   int disk;
3142   DAC960_Controller_T *Controller;
3143
3144   if (DAC960_ControllerCount == DAC960_MaxControllers)
3145   {
3146         DAC960_Error("More than %d DAC960 Controllers detected - "
3147                        "ignoring from Controller at\n",
3148                        NULL, DAC960_MaxControllers);
3149         return -ENODEV;
3150   }
3151
3152   Controller = DAC960_DetectController(dev, entry);
3153   if (!Controller)
3154         return -ENODEV;
3155
3156   if (!DAC960_InitializeController(Controller)) {
3157         DAC960_FinalizeController(Controller);
3158         return -ENODEV;
3159   }
3160
3161   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
3162         set_capacity(Controller->disks[disk], disk_size(Controller, disk));
3163         add_disk(Controller->disks[disk]);
3164   }
3165   DAC960_CreateProcEntries(Controller);
3166   return 0;
3167 }
3168
3169
3170 /*
3171   DAC960_Finalize finalizes the DAC960 Driver.
3172 */
3173
3174 static void DAC960_Remove(struct pci_dev *PCI_Device)
3175 {
3176   int Controller_Number = (long)pci_get_drvdata(PCI_Device);
3177   DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
3178   if (Controller != NULL)
3179       DAC960_FinalizeController(Controller);
3180 }
3181
3182
3183 /*
3184   DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
3185   DAC960 V1 Firmware Controllers.
3186 */
3187
3188 static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
3189 {
3190   DAC960_Controller_T *Controller = Command->Controller;
3191   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
3192   DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
3193                                         Command->V1.ScatterGatherList;
3194   struct scatterlist *ScatterList = Command->V1.ScatterList;
3195
3196   DAC960_V1_ClearCommand(Command);
3197
3198   if (Command->SegmentCount == 1)
3199     {
3200       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3201         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
3202       else
3203         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
3204
3205       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3206       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3207       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3208       CommandMailbox->Type5.BusAddress =
3209                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3210     }
3211   else
3212     {
3213       int i;
3214
3215       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3216         CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
3217       else
3218         CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
3219
3220       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3221       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3222       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3223       CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
3224
3225       CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
3226
3227       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3228                 ScatterGatherList->SegmentDataPointer =
3229                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3230                 ScatterGatherList->SegmentByteCount =
3231                         (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
3232       }
3233     }
3234   DAC960_QueueCommand(Command);
3235 }
3236
3237
3238 /*
3239   DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
3240   DAC960 V2 Firmware Controllers.
3241 */
3242
3243 static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
3244 {
3245   DAC960_Controller_T *Controller = Command->Controller;
3246   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
3247   struct scatterlist *ScatterList = Command->V2.ScatterList;
3248
3249   DAC960_V2_ClearCommand(Command);
3250
3251   CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
3252   CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
3253     (Command->DmaDirection == PCI_DMA_FROMDEVICE);
3254   CommandMailbox->SCSI_10.DataTransferSize =
3255     Command->BlockCount << DAC960_BlockSizeBits;
3256   CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
3257   CommandMailbox->SCSI_10.PhysicalDevice =
3258     Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
3259   CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
3260   CommandMailbox->SCSI_10.CDBLength = 10;
3261   CommandMailbox->SCSI_10.SCSI_CDB[0] =
3262     (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
3263   CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
3264   CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
3265   CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
3266   CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
3267   CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
3268   CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
3269
3270   if (Command->SegmentCount == 1)
3271     {
3272       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3273                              .ScatterGatherSegments[0]
3274                              .SegmentDataPointer =
3275         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3276       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3277                              .ScatterGatherSegments[0]
3278                              .SegmentByteCount =
3279         CommandMailbox->SCSI_10.DataTransferSize;
3280     }
3281   else
3282     {
3283       DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
3284       int i;
3285
3286       if (Command->SegmentCount > 2)
3287         {
3288           ScatterGatherList = Command->V2.ScatterGatherList;
3289           CommandMailbox->SCSI_10.CommandControlBits
3290                          .AdditionalScatterGatherListMemory = true;
3291           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3292                 .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
3293           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3294                          .ExtendedScatterGather.ScatterGatherList0Address =
3295             Command->V2.ScatterGatherListDMA;
3296         }
3297       else
3298         ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
3299                                  .ScatterGatherSegments;
3300
3301       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3302                 ScatterGatherList->SegmentDataPointer =
3303                         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3304                 ScatterGatherList->SegmentByteCount =
3305                         (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
3306       }
3307     }
3308   DAC960_QueueCommand(Command);
3309 }
3310
3311
3312 static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
3313 {
3314         struct request *Request;
3315         DAC960_Command_T *Command;
3316
3317    while(1) {
3318         Request = elv_next_request(req_q);
3319         if (!Request)
3320                 return 1;
3321
3322         Command = DAC960_AllocateCommand(Controller);
3323         if (Command == NULL)
3324                 return 0;
3325
3326         if (rq_data_dir(Request) == READ) {
3327                 Command->DmaDirection = PCI_DMA_FROMDEVICE;
3328                 Command->CommandType = DAC960_ReadCommand;
3329         } else {
3330                 Command->DmaDirection = PCI_DMA_TODEVICE;
3331                 Command->CommandType = DAC960_WriteCommand;
3332         }
3333         Command->Completion = Request->end_io_data;
3334         Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
3335         Command->BlockNumber = Request->sector;
3336         Command->BlockCount = Request->nr_sectors;
3337         Command->Request = Request;
3338         blkdev_dequeue_request(Request);
3339         Command->SegmentCount = blk_rq_map_sg(req_q,
3340                   Command->Request, Command->cmd_sglist);
3341         /* pci_map_sg MAY change the value of SegCount */
3342         Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
3343                  Command->SegmentCount, Command->DmaDirection);
3344
3345         DAC960_QueueReadWriteCommand(Command);
3346   }
3347 }
3348
3349 /*
3350   DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
3351   I/O Request Queue and queues it to the Controller.  WaitForCommand is true if
3352   this function should wait for a Command to become available if necessary.
3353   This function returns true if an I/O Request was queued and false otherwise.
3354 */
3355 static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
3356 {
3357         int i;
3358
3359         if (!controller->ControllerInitialized)
3360                 return;
3361
3362         /* Do this better later! */
3363         for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
3364                 struct request_queue *req_q = controller->RequestQueue[i];
3365
3366                 if (req_q == NULL)
3367                         continue;
3368
3369                 if (!DAC960_process_queue(controller, req_q)) {
3370                         controller->req_q_index = i;
3371                         return;
3372                 }
3373         }
3374
3375         if (controller->req_q_index == 0)
3376                 return;
3377
3378         for (i = 0; i < controller->req_q_index; i++) {
3379                 struct request_queue *req_q = controller->RequestQueue[i];
3380
3381                 if (req_q == NULL)
3382                         continue;
3383
3384                 if (!DAC960_process_queue(controller, req_q)) {
3385                         controller->req_q_index = i;
3386                         return;
3387                 }
3388         }
3389 }
3390
3391
3392 /*
3393   DAC960_queue_partial_rw extracts one bio from the request already
3394   associated with argument command, and construct a new command block to retry I/O
3395   only on that bio.  Queue that command to the controller.
3396
3397   This function re-uses a previously-allocated Command,
3398         there is no failure mode from trying to allocate a command.
3399 */
3400
3401 static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
3402 {
3403   DAC960_Controller_T *Controller = Command->Controller;
3404   struct request *Request = Command->Request;
3405   struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
3406
3407   if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3408     Command->CommandType = DAC960_ReadRetryCommand;
3409   else
3410     Command->CommandType = DAC960_WriteRetryCommand;
3411
3412   /*
3413    * We could be more efficient with these mapping requests
3414    * and map only the portions that we need.  But since this
3415    * code should almost never be called, just go with a
3416    * simple coding.
3417    */
3418   (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
3419
3420   (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
3421   /*
3422    * Resubmitting the request sector at a time is really tedious.
3423    * But, this should almost never happen.  So, we're willing to pay
3424    * this price so that in the end, as much of the transfer is completed
3425    * successfully as possible.
3426    */
3427   Command->SegmentCount = 1;
3428   Command->BlockNumber = Request->sector;
3429   Command->BlockCount = 1;
3430   DAC960_QueueReadWriteCommand(Command);
3431   return;
3432 }
3433
3434 /*
3435   DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
3436 */
3437
3438 static void DAC960_RequestFunction(struct request_queue *RequestQueue)
3439 {
3440         DAC960_ProcessRequest(RequestQueue->queuedata);
3441 }
3442
3443 /*
3444   DAC960_ProcessCompletedBuffer performs completion processing for an
3445   individual Buffer.
3446 */
3447
3448 static inline boolean DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
3449                                                  boolean SuccessfulIO)
3450 {
3451         struct request *Request = Command->Request;
3452         int UpToDate;
3453
3454         UpToDate = 0;
3455         if (SuccessfulIO)
3456                 UpToDate = 1;
3457
3458         pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
3459                 Command->SegmentCount, Command->DmaDirection);
3460
3461          if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) {
3462                 add_disk_randomness(Request->rq_disk);
3463                 end_that_request_last(Request, UpToDate);
3464
3465                 if (Command->Completion) {
3466                         complete(Command->Completion);
3467                         Command->Completion = NULL;
3468                 }
3469                 return true;
3470         }
3471         return false;
3472 }
3473
3474 /*
3475   DAC960_V1_ReadWriteError prints an appropriate error message for Command
3476   when an error occurs on a Read or Write operation.
3477 */
3478
3479 static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
3480 {
3481   DAC960_Controller_T *Controller = Command->Controller;
3482   unsigned char *CommandName = "UNKNOWN";
3483   switch (Command->CommandType)
3484     {
3485     case DAC960_ReadCommand:
3486     case DAC960_ReadRetryCommand:
3487       CommandName = "READ";
3488       break;
3489     case DAC960_WriteCommand:
3490     case DAC960_WriteRetryCommand:
3491       CommandName = "WRITE";
3492       break;
3493     case DAC960_MonitoringCommand:
3494     case DAC960_ImmediateCommand:
3495     case DAC960_QueuedCommand:
3496       break;
3497     }
3498   switch (Command->V1.CommandStatus)
3499     {
3500     case DAC960_V1_IrrecoverableDataError:
3501       DAC960_Error("Irrecoverable Data Error on %s:\n",
3502                    Controller, CommandName);
3503       break;
3504     case DAC960_V1_LogicalDriveNonexistentOrOffline:
3505       DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
3506                    Controller, CommandName);
3507       break;
3508     case DAC960_V1_AccessBeyondEndOfLogicalDrive:
3509       DAC960_Error("Attempt to Access Beyond End of Logical Drive "
3510                    "on %s:\n", Controller, CommandName);
3511       break;
3512     case DAC960_V1_BadDataEncountered:
3513       DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
3514       break;
3515     default:
3516       DAC960_Error("Unexpected Error Status %04X on %s:\n",
3517                    Controller, Command->V1.CommandStatus, CommandName);
3518       break;
3519     }
3520   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
3521                Controller, Controller->ControllerNumber,
3522                Command->LogicalDriveNumber, Command->BlockNumber,
3523                Command->BlockNumber + Command->BlockCount - 1);
3524 }
3525
3526
3527 /*
3528   DAC960_V1_ProcessCompletedCommand performs completion processing for Command
3529   for DAC960 V1 Firmware Controllers.
3530 */
3531
3532 static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
3533 {
3534   DAC960_Controller_T *Controller = Command->Controller;
3535   DAC960_CommandType_T CommandType = Command->CommandType;
3536   DAC960_V1_CommandOpcode_T CommandOpcode =
3537     Command->V1.CommandMailbox.Common.CommandOpcode;
3538   DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
3539
3540   if (CommandType == DAC960_ReadCommand ||
3541       CommandType == DAC960_WriteCommand)
3542     {
3543
3544 #ifdef FORCE_RETRY_DEBUG
3545       CommandStatus = DAC960_V1_IrrecoverableDataError;
3546 #endif
3547
3548       if (CommandStatus == DAC960_V1_NormalCompletion) {
3549
3550                 if (!DAC960_ProcessCompletedRequest(Command, true))
3551                         BUG();
3552
3553       } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
3554                 CommandStatus == DAC960_V1_BadDataEncountered)
3555         {
3556           /*
3557            * break the command down into pieces and resubmit each
3558            * piece, hoping that some of them will succeed.
3559            */
3560            DAC960_queue_partial_rw(Command);
3561            return;
3562         }
3563       else
3564         {
3565           if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3566             DAC960_V1_ReadWriteError(Command);
3567
3568          if (!DAC960_ProcessCompletedRequest(Command, false))
3569                 BUG();
3570         }
3571     }
3572   else if (CommandType == DAC960_ReadRetryCommand ||
3573            CommandType == DAC960_WriteRetryCommand)
3574     {
3575       boolean normal_completion;
3576 #ifdef FORCE_RETRY_FAILURE_DEBUG
3577       static int retry_count = 1;
3578 #endif
3579       /*
3580         Perform completion processing for the portion that was
3581         retried, and submit the next portion, if any.
3582       */
3583       normal_completion = true;
3584       if (CommandStatus != DAC960_V1_NormalCompletion) {
3585         normal_completion = false;
3586         if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3587             DAC960_V1_ReadWriteError(Command);
3588       }
3589
3590 #ifdef FORCE_RETRY_FAILURE_DEBUG
3591       if (!(++retry_count % 10000)) {
3592               printk("V1 error retry failure test\n");
3593               normal_completion = false;
3594               DAC960_V1_ReadWriteError(Command);
3595       }
3596 #endif
3597
3598       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
3599         DAC960_queue_partial_rw(Command);
3600         return;
3601       }
3602     }
3603
3604   else if (CommandType == DAC960_MonitoringCommand)
3605     {
3606       if (Controller->ShutdownMonitoringTimer)
3607               return;
3608       if (CommandOpcode == DAC960_V1_Enquiry)
3609         {
3610           DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
3611           DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
3612           unsigned int OldCriticalLogicalDriveCount =
3613             OldEnquiry->CriticalLogicalDriveCount;
3614           unsigned int NewCriticalLogicalDriveCount =
3615             NewEnquiry->CriticalLogicalDriveCount;
3616           if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
3617             {
3618               int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
3619               while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
3620                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3621                                 "Now Exists\n", Controller,
3622                                 LogicalDriveNumber,
3623                                 Controller->ControllerNumber,
3624                                 LogicalDriveNumber);
3625               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3626               DAC960_ComputeGenericDiskInfo(Controller);
3627             }
3628           if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
3629             {
3630               int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
3631               while (++LogicalDriveNumber < Controller->LogicalDriveCount)
3632                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3633                                 "No Longer Exists\n", Controller,
3634                                 LogicalDriveNumber,
3635                                 Controller->ControllerNumber,
3636                                 LogicalDriveNumber);
3637               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3638               DAC960_ComputeGenericDiskInfo(Controller);
3639             }
3640           if (NewEnquiry->StatusFlags.DeferredWriteError !=
3641               OldEnquiry->StatusFlags.DeferredWriteError)
3642             DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
3643                             (NewEnquiry->StatusFlags.DeferredWriteError
3644                              ? "TRUE" : "FALSE"));
3645           if ((NewCriticalLogicalDriveCount > 0 ||
3646                NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
3647               (NewEnquiry->OfflineLogicalDriveCount > 0 ||
3648                NewEnquiry->OfflineLogicalDriveCount !=
3649                OldEnquiry->OfflineLogicalDriveCount) ||
3650               (NewEnquiry->DeadDriveCount > 0 ||
3651                NewEnquiry->DeadDriveCount !=
3652                OldEnquiry->DeadDriveCount) ||
3653               (NewEnquiry->EventLogSequenceNumber !=
3654                OldEnquiry->EventLogSequenceNumber) ||
3655               Controller->MonitoringTimerCount == 0 ||
3656               time_after_eq(jiffies, Controller->SecondaryMonitoringTime
3657                + DAC960_SecondaryMonitoringInterval))
3658             {
3659               Controller->V1.NeedLogicalDriveInformation = true;
3660               Controller->V1.NewEventLogSequenceNumber =
3661                 NewEnquiry->EventLogSequenceNumber;
3662               Controller->V1.NeedErrorTableInformation = true;
3663               Controller->V1.NeedDeviceStateInformation = true;
3664               Controller->V1.StartDeviceStateScan = true;
3665               Controller->V1.NeedBackgroundInitializationStatus =
3666                 Controller->V1.BackgroundInitializationStatusSupported;
3667               Controller->SecondaryMonitoringTime = jiffies;
3668             }
3669           if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3670               NewEnquiry->RebuildFlag
3671               == DAC960_V1_BackgroundRebuildInProgress ||
3672               OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3673               OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
3674             {
3675               Controller->V1.NeedRebuildProgress = true;
3676               Controller->V1.RebuildProgressFirst =
3677                 (NewEnquiry->CriticalLogicalDriveCount <
3678                  OldEnquiry->CriticalLogicalDriveCount);
3679             }
3680           if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
3681             switch (NewEnquiry->RebuildFlag)
3682               {
3683               case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
3684                 DAC960_Progress("Consistency Check Completed Successfully\n",
3685                                 Controller);
3686                 break;
3687               case DAC960_V1_StandbyRebuildInProgress:
3688               case DAC960_V1_BackgroundRebuildInProgress:
3689                 break;
3690               case DAC960_V1_BackgroundCheckInProgress:
3691                 Controller->V1.NeedConsistencyCheckProgress = true;
3692                 break;
3693               case DAC960_V1_StandbyRebuildCompletedWithError:
3694                 DAC960_Progress("Consistency Check Completed with Error\n",
3695                                 Controller);
3696                 break;
3697               case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
3698                 DAC960_Progress("Consistency Check Failed - "
3699                                 "Physical Device Failed\n", Controller);
3700                 break;
3701               case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
3702                 DAC960_Progress("Consistency Check Failed - "
3703                                 "Logical Drive Failed\n", Controller);
3704                 break;
3705               case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
3706                 DAC960_Progress("Consistency Check Failed - Other Causes\n",
3707                                 Controller);
3708                 break;
3709               case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
3710                 DAC960_Progress("Consistency Check Successfully Terminated\n",
3711                                 Controller);
3712                 break;
3713               }
3714           else if (NewEnquiry->RebuildFlag
3715                    == DAC960_V1_BackgroundCheckInProgress)
3716             Controller->V1.NeedConsistencyCheckProgress = true;
3717           Controller->MonitoringAlertMode =
3718             (NewEnquiry->CriticalLogicalDriveCount > 0 ||
3719              NewEnquiry->OfflineLogicalDriveCount > 0 ||
3720              NewEnquiry->DeadDriveCount > 0);
3721           if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
3722             {
3723               Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
3724               Controller->V1.RebuildFlagPending = true;
3725             }
3726           memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
3727                  sizeof(DAC960_V1_Enquiry_T));
3728         }
3729       else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
3730         {
3731           static char
3732             *DAC960_EventMessages[] =
3733                { "killed because write recovery failed",
3734                  "killed because of SCSI bus reset failure",
3735                  "killed because of double check condition",
3736                  "killed because it was removed",
3737                  "killed because of gross error on SCSI chip",
3738                  "killed because of bad tag returned from drive",
3739                  "killed because of timeout on SCSI command",
3740                  "killed because of reset SCSI command issued from system",
3741                  "killed because busy or parity error count exceeded limit",
3742                  "killed because of 'kill drive' command from system",
3743                  "killed because of selection timeout",
3744                  "killed due to SCSI phase sequence error",
3745                  "killed due to unknown status" };
3746           DAC960_V1_EventLogEntry_T *EventLogEntry =
3747                 Controller->V1.EventLogEntry;
3748           if (EventLogEntry->SequenceNumber ==
3749               Controller->V1.OldEventLogSequenceNumber)
3750             {
3751               unsigned char SenseKey = EventLogEntry->SenseKey;
3752               unsigned char AdditionalSenseCode =
3753                 EventLogEntry->AdditionalSenseCode;
3754               unsigned char AdditionalSenseCodeQualifier =
3755                 EventLogEntry->AdditionalSenseCodeQualifier;
3756               if (SenseKey == DAC960_SenseKey_VendorSpecific &&
3757                   AdditionalSenseCode == 0x80 &&
3758                   AdditionalSenseCodeQualifier <
3759                   ARRAY_SIZE(DAC960_EventMessages))
3760                 DAC960_Critical("Physical Device %d:%d %s\n", Controller,
3761                                 EventLogEntry->Channel,
3762                                 EventLogEntry->TargetID,
3763                                 DAC960_EventMessages[
3764                                   AdditionalSenseCodeQualifier]);
3765               else if (SenseKey == DAC960_SenseKey_UnitAttention &&
3766                        AdditionalSenseCode == 0x29)
3767                 {
3768                   if (Controller->MonitoringTimerCount > 0)
3769                     Controller->V1.DeviceResetCount[EventLogEntry->Channel]
3770                                                    [EventLogEntry->TargetID]++;
3771                 }
3772               else if (!(SenseKey == DAC960_SenseKey_NoSense ||
3773                          (SenseKey == DAC960_SenseKey_NotReady &&
3774                           AdditionalSenseCode == 0x04 &&
3775                           (AdditionalSenseCodeQualifier == 0x01 ||
3776                            AdditionalSenseCodeQualifier == 0x02))))
3777                 {
3778                   DAC960_Critical("Physical Device %d:%d Error Log: "
3779                                   "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
3780                                   Controller,
3781                                   EventLogEntry->Channel,
3782                                   EventLogEntry->TargetID,
3783                                   SenseKey,
3784                                   AdditionalSenseCode,
3785                                   AdditionalSenseCodeQualifier);
3786                   DAC960_Critical("Physical Device %d:%d Error Log: "
3787                                   "Information = %02X%02X%02X%02X "
3788                                   "%02X%02X%02X%02X\n",
3789                                   Controller,
3790                                   EventLogEntry->Channel,
3791                                   EventLogEntry->TargetID,
3792                                   EventLogEntry->Information[0],
3793                                   EventLogEntry->Information[1],
3794                                   EventLogEntry->Information[2],
3795                                   EventLogEntry->Information[3],
3796                                   EventLogEntry->CommandSpecificInformation[0],
3797                                   EventLogEntry->CommandSpecificInformation[1],
3798                                   EventLogEntry->CommandSpecificInformation[2],
3799                                   EventLogEntry->CommandSpecificInformation[3]);
3800                 }
3801             }
3802           Controller->V1.OldEventLogSequenceNumber++;
3803         }
3804       else if (CommandOpcode == DAC960_V1_GetErrorTable)
3805         {
3806           DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
3807           DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
3808           int Channel, TargetID;
3809           for (Channel = 0; Channel < Controller->Channels; Channel++)
3810             for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
3811               {
3812                 DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
3813                   &NewErrorTable->ErrorTableEntries[Channel][TargetID];
3814                 DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
3815                   &OldErrorTable->ErrorTableEntries[Channel][TargetID];
3816                 if ((NewErrorEntry->ParityErrorCount !=
3817                      OldErrorEntry->ParityErrorCount) ||
3818                     (NewErrorEntry->SoftErrorCount !=
3819                      OldErrorEntry->SoftErrorCount) ||
3820                     (NewErrorEntry->HardErrorCount !=
3821                      OldErrorEntry->HardErrorCount) ||
3822                     (NewErrorEntry->MiscErrorCount !=
3823                      OldErrorEntry->MiscErrorCount))
3824                   DAC960_Critical("Physical Device %d:%d Errors: "
3825                                   "Parity = %d, Soft = %d, "
3826                                   "Hard = %d, Misc = %d\n",
3827                                   Controller, Channel, TargetID,
3828                                   NewErrorEntry->ParityErrorCount,
3829                                   NewErrorEntry->SoftErrorCount,
3830                                   NewErrorEntry->HardErrorCount,
3831                                   NewErrorEntry->MiscErrorCount);
3832               }
3833           memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
3834                  sizeof(DAC960_V1_ErrorTable_T));
3835         }
3836       else if (CommandOpcode == DAC960_V1_GetDeviceState)
3837         {
3838           DAC960_V1_DeviceState_T *OldDeviceState =
3839             &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
3840                                        [Controller->V1.DeviceStateTargetID];
3841           DAC960_V1_DeviceState_T *NewDeviceState =
3842             Controller->V1.NewDeviceState;
3843           if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
3844             DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
3845                             Controller->V1.DeviceStateChannel,
3846                             Controller->V1.DeviceStateTargetID,
3847                             (NewDeviceState->DeviceState
3848                              == DAC960_V1_Device_Dead
3849                              ? "DEAD"
3850                              : NewDeviceState->DeviceState
3851                                == DAC960_V1_Device_WriteOnly
3852                                ? "WRITE-ONLY"
3853                                : NewDeviceState->DeviceState
3854                                  == DAC960_V1_Device_Online
3855                                  ? "ONLINE" : "STANDBY"));
3856           if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
3857               NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
3858             {
3859               Controller->V1.NeedDeviceInquiryInformation = true;
3860               Controller->V1.NeedDeviceSerialNumberInformation = true;
3861               Controller->V1.DeviceResetCount
3862                              [Controller->V1.DeviceStateChannel]
3863                              [Controller->V1.DeviceStateTargetID] = 0;
3864             }
3865           memcpy(OldDeviceState, NewDeviceState,
3866                  sizeof(DAC960_V1_DeviceState_T));
3867         }
3868       else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
3869         {
3870           int LogicalDriveNumber;
3871           for (LogicalDriveNumber = 0;
3872                LogicalDriveNumber < Controller->LogicalDriveCount;
3873                LogicalDriveNumber++)
3874             {
3875               DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
3876                 &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
3877               DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
3878                 &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
3879               if (NewLogicalDriveInformation->LogicalDriveState !=
3880                   OldLogicalDriveInformation->LogicalDriveState)
3881                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3882                                 "is now %s\n", Controller,
3883                                 LogicalDriveNumber,
3884                                 Controller->ControllerNumber,
3885                                 LogicalDriveNumber,
3886                                 (NewLogicalDriveInformation->LogicalDriveState
3887                                  == DAC960_V1_LogicalDrive_Online
3888                                  ? "ONLINE"
3889                                  : NewLogicalDriveInformation->LogicalDriveState
3890                                    == DAC960_V1_LogicalDrive_Critical
3891                                    ? "CRITICAL" : "OFFLINE"));
3892               if (NewLogicalDriveInformation->WriteBack !=
3893                   OldLogicalDriveInformation->WriteBack)
3894                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3895                                 "is now %s\n", Controller,
3896                                 LogicalDriveNumber,
3897                                 Controller->ControllerNumber,
3898                                 LogicalDriveNumber,
3899                                 (NewLogicalDriveInformation->WriteBack
3900                                  ? "WRITE BACK" : "WRITE THRU"));
3901             }
3902           memcpy(&Controller->V1.LogicalDriveInformation,
3903                  Controller->V1.NewLogicalDriveInformation,
3904                  sizeof(DAC960_V1_LogicalDriveInformationArray_T));
3905         }
3906       else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
3907         {
3908           unsigned int LogicalDriveNumber =
3909             Controller->V1.RebuildProgress->LogicalDriveNumber;
3910           unsigned int LogicalDriveSize =
3911             Controller->V1.RebuildProgress->LogicalDriveSize;
3912           unsigned int BlocksCompleted =
3913             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3914           if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
3915               Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
3916             CommandStatus = DAC960_V1_RebuildSuccessful;
3917           switch (CommandStatus)
3918             {
3919             case DAC960_V1_NormalCompletion:
3920               Controller->EphemeralProgressMessage = true;
3921               DAC960_Progress("Rebuild in Progress: "
3922                               "Logical Drive %d (/dev/rd/c%dd%d) "
3923                               "%d%% completed\n",
3924                               Controller, LogicalDriveNumber,
3925                               Controller->ControllerNumber,
3926                               LogicalDriveNumber,
3927                               (100 * (BlocksCompleted >> 7))
3928                               / (LogicalDriveSize >> 7));
3929               Controller->EphemeralProgressMessage = false;
3930               break;
3931             case DAC960_V1_RebuildFailed_LogicalDriveFailure:
3932               DAC960_Progress("Rebuild Failed due to "
3933                               "Logical Drive Failure\n", Controller);
3934               break;
3935             case DAC960_V1_RebuildFailed_BadBlocksOnOther:
3936               DAC960_Progress("Rebuild Failed due to "
3937                               "Bad Blocks on Other Drives\n", Controller);
3938               break;
3939             case DAC960_V1_RebuildFailed_NewDriveFailed:
3940               DAC960_Progress("Rebuild Failed due to "
3941                               "Failure of Drive Being Rebuilt\n", Controller);
3942               break;
3943             case DAC960_V1_NoRebuildOrCheckInProgress:
3944               break;
3945             case DAC960_V1_RebuildSuccessful:
3946               DAC960_Progress("Rebuild Completed Successfully\n", Controller);
3947               break;
3948             case DAC960_V1_RebuildSuccessfullyTerminated:
3949               DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
3950               break;
3951             }
3952           Controller->V1.LastRebuildStatus = CommandStatus;
3953           if (CommandType != DAC960_MonitoringCommand &&
3954               Controller->V1.RebuildStatusPending)
3955             {
3956               Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
3957               Controller->V1.RebuildStatusPending = false;
3958             }
3959           else if (CommandType == DAC960_MonitoringCommand &&
3960                    CommandStatus != DAC960_V1_NormalCompletion &&
3961                    CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
3962             {
3963               Controller->V1.PendingRebuildStatus = CommandStatus;
3964               Controller->V1.RebuildStatusPending = true;
3965             }
3966         }
3967       else if (CommandOpcode == DAC960_V1_RebuildStat)
3968         {
3969           unsigned int LogicalDriveNumber =
3970             Controller->V1.RebuildProgress->LogicalDriveNumber;
3971           unsigned int LogicalDriveSize =
3972             Controller->V1.RebuildProgress->LogicalDriveSize;
3973           unsigned int BlocksCompleted =
3974             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3975           if (CommandStatus == DAC960_V1_NormalCompletion)
3976             {
3977               Controller->EphemeralProgressMessage = true;
3978               DAC960_Progress("Consistency Check in Progress: "
3979                               "Logical Drive %d (/dev/rd/c%dd%d) "
3980                               "%d%% completed\n",
3981                               Controller, LogicalDriveNumber,
3982                               Controller->ControllerNumber,
3983                               LogicalDriveNumber,
3984                               (100 * (BlocksCompleted >> 7))
3985                               / (LogicalDriveSize >> 7));
3986               Controller->EphemeralProgressMessage = false;
3987             }
3988         }
3989       else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
3990         {
3991           unsigned int LogicalDriveNumber =
3992             Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
3993           unsigned int LogicalDriveSize =
3994             Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
3995           unsigned int BlocksCompleted =
3996             Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
3997           switch (CommandStatus)
3998             {
3999             case DAC960_V1_NormalCompletion:
4000               switch (Controller->V1.BackgroundInitializationStatus->Status)
4001                 {
4002                 case DAC960_V1_BackgroundInitializationInvalid:
4003                   break;
4004                 case DAC960_V1_BackgroundInitializationStarted:
4005                   DAC960_Progress("Background Initialization Started\n",
4006                                   Controller);
4007                   break;
4008                 case DAC960_V1_BackgroundInitializationInProgress:
4009                   if (BlocksCompleted ==
4010                       Controller->V1.LastBackgroundInitializationStatus.
4011                                 BlocksCompleted &&
4012                       LogicalDriveNumber ==
4013                       Controller->V1.LastBackgroundInitializationStatus.
4014                                 LogicalDriveNumber)
4015                     break;
4016                   Controller->EphemeralProgressMessage = true;
4017                   DAC960_Progress("Background Initialization in Progress: "
4018                                   "Logical Drive %d (/dev/rd/c%dd%d) "
4019                                   "%d%% completed\n",
4020                                   Controller, LogicalDriveNumber,
4021                                   Controller->ControllerNumber,
4022                                   LogicalDriveNumber,
4023                                   (100 * (BlocksCompleted >> 7))
4024                                   / (LogicalDriveSize >> 7));
4025                   Controller->EphemeralProgressMessage = false;
4026                   break;
4027                 case DAC960_V1_BackgroundInitializationSuspended:
4028                   DAC960_Progress("Background Initialization Suspended\n",
4029                                   Controller);
4030                   break;
4031                 case DAC960_V1_BackgroundInitializationCancelled:
4032                   DAC960_Progress("Background Initialization Cancelled\n",
4033                                   Controller);
4034                   break;
4035                 }
4036               memcpy(&Controller->V1.LastBackgroundInitializationStatus,
4037                      Controller->V1.BackgroundInitializationStatus,
4038                      sizeof(DAC960_V1_BackgroundInitializationStatus_T));
4039               break;
4040             case DAC960_V1_BackgroundInitSuccessful:
4041               if (Controller->V1.BackgroundInitializationStatus->Status ==
4042                   DAC960_V1_BackgroundInitializationInProgress)
4043                 DAC960_Progress("Background Initialization "
4044                                 "Completed Successfully\n", Controller);
4045               Controller->V1.BackgroundInitializationStatus->Status =
4046                 DAC960_V1_BackgroundInitializationInvalid;
4047               break;
4048             case DAC960_V1_BackgroundInitAborted:
4049               if (Controller->V1.BackgroundInitializationStatus->Status ==
4050                   DAC960_V1_BackgroundInitializationInProgress)
4051                 DAC960_Progress("Background Initialization Aborted\n",
4052                                 Controller);
4053               Controller->V1.BackgroundInitializationStatus->Status =
4054                 DAC960_V1_BackgroundInitializationInvalid;
4055               break;
4056             case DAC960_V1_NoBackgroundInitInProgress:
4057               break;
4058             }
4059         }
4060       else if (CommandOpcode == DAC960_V1_DCDB)
4061         {
4062            /*
4063              This is a bit ugly.
4064
4065              The InquiryStandardData and
4066              the InquiryUntitSerialNumber information
4067              retrieval operations BOTH use the DAC960_V1_DCDB
4068              commands.  the test above can't distinguish between
4069              these two cases.
4070
4071              Instead, we rely on the order of code later in this
4072              function to ensure that DeviceInquiryInformation commands
4073              are submitted before DeviceSerialNumber commands.
4074            */
4075            if (Controller->V1.NeedDeviceInquiryInformation)
4076              {
4077                 DAC960_SCSI_Inquiry_T *InquiryStandardData =
4078                         &Controller->V1.InquiryStandardData
4079                                 [Controller->V1.DeviceStateChannel]
4080                                 [Controller->V1.DeviceStateTargetID];
4081                 if (CommandStatus != DAC960_V1_NormalCompletion)
4082                    {
4083                         memset(InquiryStandardData, 0,
4084                                 sizeof(DAC960_SCSI_Inquiry_T));
4085                         InquiryStandardData->PeripheralDeviceType = 0x1F;
4086                     }
4087                  else
4088                         memcpy(InquiryStandardData,
4089                                 Controller->V1.NewInquiryStandardData,
4090                                 sizeof(DAC960_SCSI_Inquiry_T));
4091                  Controller->V1.NeedDeviceInquiryInformation = false;
4092               }
4093            else if (Controller->V1.NeedDeviceSerialNumberInformation)
4094               {
4095                 DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4096                   &Controller->V1.InquiryUnitSerialNumber
4097                                 [Controller->V1.DeviceStateChannel]
4098                                 [Controller->V1.DeviceStateTargetID];
4099                  if (CommandStatus != DAC960_V1_NormalCompletion)
4100                    {
4101                         memset(InquiryUnitSerialNumber, 0,
4102                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4103                         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4104                     }
4105                   else
4106                         memcpy(InquiryUnitSerialNumber,
4107                                 Controller->V1.NewInquiryUnitSerialNumber,
4108                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4109               Controller->V1.NeedDeviceSerialNumberInformation = false;
4110              }
4111         }
4112       /*
4113         Begin submitting new monitoring commands.
4114        */
4115       if (Controller->V1.NewEventLogSequenceNumber
4116           - Controller->V1.OldEventLogSequenceNumber > 0)
4117         {
4118           Command->V1.CommandMailbox.Type3E.CommandOpcode =
4119             DAC960_V1_PerformEventLogOperation;
4120           Command->V1.CommandMailbox.Type3E.OperationType =
4121             DAC960_V1_GetEventLogEntry;
4122           Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
4123           Command->V1.CommandMailbox.Type3E.SequenceNumber =
4124             Controller->V1.OldEventLogSequenceNumber;
4125           Command->V1.CommandMailbox.Type3E.BusAddress =
4126                 Controller->V1.EventLogEntryDMA;
4127           DAC960_QueueCommand(Command);
4128           return;
4129         }
4130       if (Controller->V1.NeedErrorTableInformation)
4131         {
4132           Controller->V1.NeedErrorTableInformation = false;
4133           Command->V1.CommandMailbox.Type3.CommandOpcode =
4134             DAC960_V1_GetErrorTable;
4135           Command->V1.CommandMailbox.Type3.BusAddress =
4136                 Controller->V1.NewErrorTableDMA;
4137           DAC960_QueueCommand(Command);
4138           return;
4139         }
4140       if (Controller->V1.NeedRebuildProgress &&
4141           Controller->V1.RebuildProgressFirst)
4142         {
4143           Controller->V1.NeedRebuildProgress = false;
4144           Command->V1.CommandMailbox.Type3.CommandOpcode =
4145             DAC960_V1_GetRebuildProgress;
4146           Command->V1.CommandMailbox.Type3.BusAddress =
4147             Controller->V1.RebuildProgressDMA;
4148           DAC960_QueueCommand(Command);
4149           return;
4150         }
4151       if (Controller->V1.NeedDeviceStateInformation)
4152         {
4153           if (Controller->V1.NeedDeviceInquiryInformation)
4154             {
4155               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4156               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4157
4158               dma_addr_t NewInquiryStandardDataDMA =
4159                 Controller->V1.NewInquiryStandardDataDMA;
4160
4161               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4162               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4163               DCDB->Channel = Controller->V1.DeviceStateChannel;
4164               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4165               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4166               DCDB->EarlyStatus = false;
4167               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4168               DCDB->NoAutomaticRequestSense = false;
4169               DCDB->DisconnectPermitted = true;
4170               DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
4171               DCDB->BusAddress = NewInquiryStandardDataDMA;
4172               DCDB->CDBLength = 6;
4173               DCDB->TransferLengthHigh4 = 0;
4174               DCDB->SenseLength = sizeof(DCDB->SenseData);
4175               DCDB->CDB[0] = 0x12; /* INQUIRY */
4176               DCDB->CDB[1] = 0; /* EVPD = 0 */
4177               DCDB->CDB[2] = 0; /* Page Code */
4178               DCDB->CDB[3] = 0; /* Reserved */
4179               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
4180               DCDB->CDB[5] = 0; /* Control */
4181               DAC960_QueueCommand(Command);
4182               return;
4183             }
4184           if (Controller->V1.NeedDeviceSerialNumberInformation)
4185             {
4186               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4187               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4188               dma_addr_t NewInquiryUnitSerialNumberDMA =
4189                         Controller->V1.NewInquiryUnitSerialNumberDMA;
4190
4191               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4192               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4193               DCDB->Channel = Controller->V1.DeviceStateChannel;
4194               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4195               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4196               DCDB->EarlyStatus = false;
4197               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4198               DCDB->NoAutomaticRequestSense = false;
4199               DCDB->DisconnectPermitted = true;
4200               DCDB->TransferLength =
4201                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4202               DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
4203               DCDB->CDBLength = 6;
4204               DCDB->TransferLengthHigh4 = 0;
4205               DCDB->SenseLength = sizeof(DCDB->SenseData);
4206               DCDB->CDB[0] = 0x12; /* INQUIRY */
4207               DCDB->CDB[1] = 1; /* EVPD = 1 */
4208               DCDB->CDB[2] = 0x80; /* Page Code */
4209               DCDB->CDB[3] = 0; /* Reserved */
4210               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4211               DCDB->CDB[5] = 0; /* Control */
4212               DAC960_QueueCommand(Command);
4213               return;
4214             }
4215           if (Controller->V1.StartDeviceStateScan)
4216             {
4217               Controller->V1.DeviceStateChannel = 0;
4218               Controller->V1.DeviceStateTargetID = 0;
4219               Controller->V1.StartDeviceStateScan = false;
4220             }
4221           else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
4222             {
4223               Controller->V1.DeviceStateChannel++;
4224               Controller->V1.DeviceStateTargetID = 0;
4225             }
4226           if (Controller->V1.DeviceStateChannel < Controller->Channels)
4227             {
4228               Controller->V1.NewDeviceState->DeviceState =
4229                 DAC960_V1_Device_Dead;
4230               Command->V1.CommandMailbox.Type3D.CommandOpcode =
4231                 DAC960_V1_GetDeviceState;
4232               Command->V1.CommandMailbox.Type3D.Channel =
4233                 Controller->V1.DeviceStateChannel;
4234               Command->V1.CommandMailbox.Type3D.TargetID =
4235                 Controller->V1.DeviceStateTargetID;
4236               Command->V1.CommandMailbox.Type3D.BusAddress =
4237                 Controller->V1.NewDeviceStateDMA;
4238               DAC960_QueueCommand(Command);
4239               return;
4240             }
4241           Controller->V1.NeedDeviceStateInformation = false;
4242         }
4243       if (Controller->V1.NeedLogicalDriveInformation)
4244         {
4245           Controller->V1.NeedLogicalDriveInformation = false;
4246           Command->V1.CommandMailbox.Type3.CommandOpcode =
4247             DAC960_V1_GetLogicalDriveInformation;
4248           Command->V1.CommandMailbox.Type3.BusAddress =
4249             Controller->V1.NewLogicalDriveInformationDMA;
4250           DAC960_QueueCommand(Command);
4251           return;
4252         }
4253       if (Controller->V1.NeedRebuildProgress)
4254         {
4255           Controller->V1.NeedRebuildProgress = false;
4256           Command->V1.CommandMailbox.Type3.CommandOpcode =
4257             DAC960_V1_GetRebuildProgress;
4258           Command->V1.CommandMailbox.Type3.BusAddress =
4259                 Controller->V1.RebuildProgressDMA;
4260           DAC960_QueueCommand(Command);
4261           return;
4262         }
4263       if (Controller->V1.NeedConsistencyCheckProgress)
4264         {
4265           Controller->V1.NeedConsistencyCheckProgress = false;
4266           Command->V1.CommandMailbox.Type3.CommandOpcode =
4267             DAC960_V1_RebuildStat;
4268           Command->V1.CommandMailbox.Type3.BusAddress =
4269             Controller->V1.RebuildProgressDMA;
4270           DAC960_QueueCommand(Command);
4271           return;
4272         }
4273       if (Controller->V1.NeedBackgroundInitializationStatus)
4274         {
4275           Controller->V1.NeedBackgroundInitializationStatus = false;
4276           Command->V1.CommandMailbox.Type3B.CommandOpcode =
4277             DAC960_V1_BackgroundInitializationControl;
4278           Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
4279           Command->V1.CommandMailbox.Type3B.BusAddress =
4280             Controller->V1.BackgroundInitializationStatusDMA;
4281           DAC960_QueueCommand(Command);
4282           return;
4283         }
4284       Controller->MonitoringTimerCount++;
4285       Controller->MonitoringTimer.expires =
4286         jiffies + DAC960_MonitoringTimerInterval;
4287         add_timer(&Controller->MonitoringTimer);
4288     }
4289   if (CommandType == DAC960_ImmediateCommand)
4290     {
4291       complete(Command->Completion);
4292       Command->Completion = NULL;
4293       return;
4294     }
4295   if (CommandType == DAC960_QueuedCommand)
4296     {
4297       DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
4298       KernelCommand->CommandStatus = Command->V1.CommandStatus;
4299       Command->V1.KernelCommand = NULL;
4300       if (CommandOpcode == DAC960_V1_DCDB)
4301         Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
4302                                           [KernelCommand->DCDB->TargetID] =
4303           false;
4304       DAC960_DeallocateCommand(Command);
4305       KernelCommand->CompletionFunction(KernelCommand);
4306       return;
4307     }
4308   /*
4309     Queue a Status Monitoring Command to the Controller using the just
4310     completed Command if one was deferred previously due to lack of a
4311     free Command when the Monitoring Timer Function was called.
4312   */
4313   if (Controller->MonitoringCommandDeferred)
4314     {
4315       Controller->MonitoringCommandDeferred = false;
4316       DAC960_V1_QueueMonitoringCommand(Command);
4317       return;
4318     }
4319   /*
4320     Deallocate the Command.
4321   */
4322   DAC960_DeallocateCommand(Command);
4323   /*
4324     Wake up any processes waiting on a free Command.
4325   */
4326   wake_up(&Controller->CommandWaitQueue);
4327 }
4328
4329
4330 /*
4331   DAC960_V2_ReadWriteError prints an appropriate error message for Command
4332   when an error occurs on a Read or Write operation.
4333 */
4334
4335 static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
4336 {
4337   DAC960_Controller_T *Controller = Command->Controller;
4338   unsigned char *SenseErrors[] = { "NO SENSE", "RECOVERED ERROR",
4339                                    "NOT READY", "MEDIUM ERROR",
4340                                    "HARDWARE ERROR", "ILLEGAL REQUEST",
4341                                    "UNIT ATTENTION", "DATA PROTECT",
4342                                    "BLANK CHECK", "VENDOR-SPECIFIC",
4343                                    "COPY ABORTED", "ABORTED COMMAND",
4344                                    "EQUAL", "VOLUME OVERFLOW",
4345                                    "MISCOMPARE", "RESERVED" };
4346   unsigned char *CommandName = "UNKNOWN";
4347   switch (Command->CommandType)
4348     {
4349     case DAC960_ReadCommand:
4350     case DAC960_ReadRetryCommand:
4351       CommandName = "READ";
4352       break;
4353     case DAC960_WriteCommand:
4354     case DAC960_WriteRetryCommand:
4355       CommandName = "WRITE";
4356       break;
4357     case DAC960_MonitoringCommand:
4358     case DAC960_ImmediateCommand:
4359     case DAC960_QueuedCommand:
4360       break;
4361     }
4362   DAC960_Error("Error Condition %s on %s:\n", Controller,
4363                SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
4364   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
4365                Controller, Controller->ControllerNumber,
4366                Command->LogicalDriveNumber, Command->BlockNumber,
4367                Command->BlockNumber + Command->BlockCount - 1);
4368 }
4369
4370
4371 /*
4372   DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
4373   occurs.
4374 */
4375
4376 static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
4377                                   DAC960_V2_Event_T *Event)
4378 {
4379   DAC960_SCSI_RequestSense_T *RequestSense =
4380     (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
4381   unsigned char MessageBuffer[DAC960_LineBufferSize];
4382   static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
4383     { /* Physical Device Events (0x0000 - 0x007F) */
4384       { 0x0001, "P Online" },
4385       { 0x0002, "P Standby" },
4386       { 0x0005, "P Automatic Rebuild Started" },
4387       { 0x0006, "P Manual Rebuild Started" },
4388       { 0x0007, "P Rebuild Completed" },
4389       { 0x0008, "P Rebuild Cancelled" },
4390       { 0x0009, "P Rebuild Failed for Unknown Reasons" },
4391       { 0x000A, "P Rebuild Failed due to New Physical Device" },
4392       { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
4393       { 0x000C, "S Offline" },
4394       { 0x000D, "P Found" },
4395       { 0x000E, "P Removed" },
4396       { 0x000F, "P Unconfigured" },
4397       { 0x0010, "P Expand Capacity Started" },
4398       { 0x0011, "P Expand Capacity Completed" },
4399       { 0x0012, "P Expand Capacity Failed" },
4400       { 0x0013, "P Command Timed Out" },
4401       { 0x0014, "P Command Aborted" },
4402       { 0x0015, "P Command Retried" },
4403       { 0x0016, "P Parity Error" },
4404       { 0x0017, "P Soft Error" },
4405       { 0x0018, "P Miscellaneous Error" },
4406       { 0x0019, "P Reset" },
4407       { 0x001A, "P Active Spare Found" },
4408       { 0x001B, "P Warm Spare Found" },
4409       { 0x001C, "S Sense Data Received" },
4410       { 0x001D, "P Initialization Started" },
4411       { 0x001E, "P Initialization Completed" },
4412       { 0x001F, "P Initialization Failed" },
4413       { 0x0020, "P Initialization Cancelled" },
4414       { 0x0021, "P Failed because Write Recovery Failed" },
4415       { 0x0022, "P Failed because SCSI Bus Reset Failed" },
4416       { 0x0023, "P Failed because of Double Check Condition" },
4417       { 0x0024, "P Failed because Device Cannot Be Accessed" },
4418       { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
4419       { 0x0026, "P Failed because of Bad Tag from Device" },
4420       { 0x0027, "P Failed because of Command Timeout" },
4421       { 0x0028, "P Failed because of System Reset" },
4422       { 0x0029, "P Failed because of Busy Status or Parity Error" },
4423       { 0x002A, "P Failed because Host Set Device to Failed State" },
4424       { 0x002B, "P Failed because of Selection Timeout" },
4425       { 0x002C, "P Failed because of SCSI Bus Phase Error" },
4426       { 0x002D, "P Failed because Device Returned Unknown Status" },
4427       { 0x002E, "P Failed because Device Not Ready" },
4428       { 0x002F, "P Failed because Device Not Found at Startup" },
4429       { 0x0030, "P Failed because COD Write Operation Failed" },
4430       { 0x0031, "P Failed because BDT Write Operation Failed" },
4431       { 0x0039, "P Missing at Startup" },
4432       { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
4433       { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
4434       { 0x003D, "P Standby Rebuild Started" },
4435       /* Logical Device Events (0x0080 - 0x00FF) */
4436       { 0x0080, "M Consistency Check Started" },
4437       { 0x0081, "M Consistency Check Completed" },
4438       { 0x0082, "M Consistency Check Cancelled" },
4439       { 0x0083, "M Consistency Check Completed With Errors" },
4440       { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
4441       { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
4442       { 0x0086, "L Offline" },
4443       { 0x0087, "L Critical" },
4444       { 0x0088, "L Online" },
4445       { 0x0089, "M Automatic Rebuild Started" },
4446       { 0x008A, "M Manual Rebuild Started" },
4447       { 0x008B, "M Rebuild Completed" },
4448       { 0x008C, "M Rebuild Cancelled" },
4449       { 0x008D, "M Rebuild Failed for Unknown Reasons" },
4450       { 0x008E, "M Rebuild Failed due to New Physical Device" },
4451       { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
4452       { 0x0090, "M Initialization Started" },
4453       { 0x0091, "M Initialization Completed" },
4454       { 0x0092, "M Initialization Cancelled" },
4455       { 0x0093, "M Initialization Failed" },
4456       { 0x0094, "L Found" },
4457       { 0x0095, "L Deleted" },
4458       { 0x0096, "M Expand Capacity Started" },
4459       { 0x0097, "M Expand Capacity Completed" },
4460       { 0x0098, "M Expand Capacity Failed" },
4461       { 0x0099, "L Bad Block Found" },
4462       { 0x009A, "L Size Changed" },
4463       { 0x009B, "L Type Changed" },
4464       { 0x009C, "L Bad Data Block Found" },
4465       { 0x009E, "L Read of Data Block in BDT" },
4466       { 0x009F, "L Write Back Data for Disk Block Lost" },
4467       { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
4468       { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
4469       { 0x00A2, "L Standby Rebuild Started" },
4470       /* Fault Management Events (0x0100 - 0x017F) */
4471       { 0x0140, "E Fan %d Failed" },
4472       { 0x0141, "E Fan %d OK" },
4473       { 0x0142, "E Fan %d Not Present" },
4474       { 0x0143, "E Power Supply %d Failed" },
4475       { 0x0144, "E Power Supply %d OK" },
4476       { 0x0145, "E Power Supply %d Not Present" },
4477       { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
4478       { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
4479       { 0x0148, "E Temperature Sensor %d Temperature Normal" },
4480       { 0x0149, "E Temperature Sensor %d Not Present" },
4481       { 0x014A, "E Enclosure Management Unit %d Access Critical" },
4482       { 0x014B, "E Enclosure Management Unit %d Access OK" },
4483       { 0x014C, "E Enclosure Management Unit %d Access Offline" },
4484       /* Controller Events (0x0180 - 0x01FF) */
4485       { 0x0181, "C Cache Write Back Error" },
4486       { 0x0188, "C Battery Backup Unit Found" },
4487       { 0x0189, "C Battery Backup Unit Charge Level Low" },
4488       { 0x018A, "C Battery Backup Unit Charge Level OK" },
4489       { 0x0193, "C Installation Aborted" },
4490       { 0x0195, "C Battery Backup Unit Physically Removed" },
4491       { 0x0196, "C Memory Error During Warm Boot" },
4492       { 0x019E, "C Memory Soft ECC Error Corrected" },
4493       { 0x019F, "C Memory Hard ECC Error Corrected" },
4494       { 0x01A2, "C Battery Backup Unit Failed" },
4495       { 0x01AB, "C Mirror Race Recovery Failed" },
4496       { 0x01AC, "C Mirror Race on Critical Drive" },
4497       /* Controller Internal Processor Events */
4498       { 0x0380, "C Internal Controller Hung" },
4499       { 0x0381, "C Internal Controller Firmware Breakpoint" },
4500       { 0x0390, "C Internal Controller i960 Processor Specific Error" },
4501       { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
4502       { 0, "" } };
4503   int EventListIndex = 0, EventCode;
4504   unsigned char EventType, *EventMessage;
4505   if (Event->EventCode == 0x1C &&
4506       RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
4507       (RequestSense->AdditionalSenseCode == 0x80 ||
4508        RequestSense->AdditionalSenseCode == 0x81))
4509     Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
4510                        RequestSense->AdditionalSenseCodeQualifier;
4511   while (true)
4512     {
4513       EventCode = EventList[EventListIndex].EventCode;
4514       if (EventCode == Event->EventCode || EventCode == 0) break;
4515       EventListIndex++;
4516     }
4517   EventType = EventList[EventListIndex].EventMessage[0];
4518   EventMessage = &EventList[EventListIndex].EventMessage[2];
4519   if (EventCode == 0)
4520     {
4521       DAC960_Critical("Unknown Controller Event Code %04X\n",
4522                       Controller, Event->EventCode);
4523       return;
4524     }
4525   switch (EventType)
4526     {
4527     case 'P':
4528       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4529                       Event->Channel, Event->TargetID, EventMessage);
4530       break;
4531     case 'L':
4532       DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4533                       Event->LogicalUnit, Controller->ControllerNumber,
4534                       Event->LogicalUnit, EventMessage);
4535       break;
4536     case 'M':
4537       DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4538                       Event->LogicalUnit, Controller->ControllerNumber,
4539                       Event->LogicalUnit, EventMessage);
4540       break;
4541     case 'S':
4542       if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
4543           (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
4544            RequestSense->AdditionalSenseCode == 0x04 &&
4545            (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
4546             RequestSense->AdditionalSenseCodeQualifier == 0x02)))
4547         break;
4548       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4549                       Event->Channel, Event->TargetID, EventMessage);
4550       DAC960_Critical("Physical Device %d:%d Request Sense: "
4551                       "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
4552                       Controller,
4553                       Event->Channel,
4554                       Event->TargetID,
4555                       RequestSense->SenseKey,
4556                       RequestSense->AdditionalSenseCode,
4557                       RequestSense->AdditionalSenseCodeQualifier);
4558       DAC960_Critical("Physical Device %d:%d Request Sense: "
4559                       "Information = %02X%02X%02X%02X "
4560                       "%02X%02X%02X%02X\n",
4561                       Controller,
4562                       Event->Channel,
4563                       Event->TargetID,
4564                       RequestSense->Information[0],
4565                       RequestSense->Information[1],
4566                       RequestSense->Information[2],
4567                       RequestSense->Information[3],
4568                       RequestSense->CommandSpecificInformation[0],
4569                       RequestSense->CommandSpecificInformation[1],
4570                       RequestSense->CommandSpecificInformation[2],
4571                       RequestSense->CommandSpecificInformation[3]);
4572       break;
4573     case 'E':
4574       if (Controller->SuppressEnclosureMessages) break;
4575       sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
4576       DAC960_Critical("Enclosure %d %s\n", Controller,
4577                       Event->TargetID, MessageBuffer);
4578       break;
4579     case 'C':
4580       DAC960_Critical("Controller %s\n", Controller, EventMessage);
4581       break;
4582     default:
4583       DAC960_Critical("Unknown Controller Event Code %04X\n",
4584                       Controller, Event->EventCode);
4585       break;
4586     }
4587 }
4588
4589
4590 /*
4591   DAC960_V2_ReportProgress prints an appropriate progress message for
4592   Logical Device Long Operations.
4593 */
4594
4595 static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
4596                                      unsigned char *MessageString,
4597                                      unsigned int LogicalDeviceNumber,
4598                                      unsigned long BlocksCompleted,
4599                                      unsigned long LogicalDeviceSize)
4600 {
4601   Controller->EphemeralProgressMessage = true;
4602   DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
4603                   "%d%% completed\n", Controller,
4604                   MessageString,
4605                   LogicalDeviceNumber,
4606                   Controller->ControllerNumber,
4607                   LogicalDeviceNumber,
4608                   (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
4609   Controller->EphemeralProgressMessage = false;
4610 }
4611
4612
4613 /*
4614   DAC960_V2_ProcessCompletedCommand performs completion processing for Command
4615   for DAC960 V2 Firmware Controllers.
4616 */
4617
4618 static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
4619 {
4620   DAC960_Controller_T *Controller = Command->Controller;
4621   DAC960_CommandType_T CommandType = Command->CommandType;
4622   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
4623   DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode;
4624   DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
4625
4626   if (CommandType == DAC960_ReadCommand ||
4627       CommandType == DAC960_WriteCommand)
4628     {
4629
4630 #ifdef FORCE_RETRY_DEBUG
4631       CommandStatus = DAC960_V2_AbormalCompletion;
4632 #endif
4633       Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
4634
4635       if (CommandStatus == DAC960_V2_NormalCompletion) {
4636
4637                 if (!DAC960_ProcessCompletedRequest(Command, true))
4638                         BUG();
4639
4640       } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
4641         {
4642           /*
4643            * break the command down into pieces and resubmit each
4644            * piece, hoping that some of them will succeed.
4645            */
4646            DAC960_queue_partial_rw(Command);
4647            return;
4648         }
4649       else
4650         {
4651           if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4652             DAC960_V2_ReadWriteError(Command);
4653           /*
4654             Perform completion processing for all buffers in this I/O Request.
4655           */
4656           (void)DAC960_ProcessCompletedRequest(Command, false);
4657         }
4658     }
4659   else if (CommandType == DAC960_ReadRetryCommand ||
4660            CommandType == DAC960_WriteRetryCommand)
4661     {
4662       boolean normal_completion;
4663
4664 #ifdef FORCE_RETRY_FAILURE_DEBUG
4665       static int retry_count = 1;
4666 #endif
4667       /*
4668         Perform completion processing for the portion that was
4669         retried, and submit the next portion, if any.
4670       */
4671       normal_completion = true;
4672       if (CommandStatus != DAC960_V2_NormalCompletion) {
4673         normal_completion = false;
4674         if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4675             DAC960_V2_ReadWriteError(Command);
4676       }
4677
4678 #ifdef FORCE_RETRY_FAILURE_DEBUG
4679       if (!(++retry_count % 10000)) {
4680               printk("V2 error retry failure test\n");
4681               normal_completion = false;
4682               DAC960_V2_ReadWriteError(Command);
4683       }
4684 #endif
4685
4686       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
4687                 DAC960_queue_partial_rw(Command);
4688                 return;
4689       }
4690     }
4691   else if (CommandType == DAC960_MonitoringCommand)
4692     {
4693       if (Controller->ShutdownMonitoringTimer)
4694               return;
4695       if (CommandOpcode == DAC960_V2_GetControllerInfo)
4696         {
4697           DAC960_V2_ControllerInfo_T *NewControllerInfo =
4698             Controller->V2.NewControllerInformation;
4699           DAC960_V2_ControllerInfo_T *ControllerInfo =
4700             &Controller->V2.ControllerInformation;
4701           Controller->LogicalDriveCount =
4702             NewControllerInfo->LogicalDevicesPresent;
4703           Controller->V2.NeedLogicalDeviceInformation = true;
4704           Controller->V2.NeedPhysicalDeviceInformation = true;
4705           Controller->V2.StartLogicalDeviceInformationScan = true;
4706           Controller->V2.StartPhysicalDeviceInformationScan = true;
4707           Controller->MonitoringAlertMode =
4708             (NewControllerInfo->LogicalDevicesCritical > 0 ||
4709              NewControllerInfo->LogicalDevicesOffline > 0 ||
4710              NewControllerInfo->PhysicalDisksCritical > 0 ||
4711              NewControllerInfo->PhysicalDisksOffline > 0);
4712           memcpy(ControllerInfo, NewControllerInfo,
4713                  sizeof(DAC960_V2_ControllerInfo_T));
4714         }
4715       else if (CommandOpcode == DAC960_V2_GetEvent)
4716         {
4717           if (CommandStatus == DAC960_V2_NormalCompletion) {
4718             DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
4719           }
4720           Controller->V2.NextEventSequenceNumber++;
4721         }
4722       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
4723                CommandStatus == DAC960_V2_NormalCompletion)
4724         {
4725           DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
4726             Controller->V2.NewPhysicalDeviceInformation;
4727           unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
4728           DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4729             Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4730           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4731             Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4732           unsigned int DeviceIndex;
4733           while (PhysicalDeviceInfo != NULL &&
4734                  (NewPhysicalDeviceInfo->Channel >
4735                   PhysicalDeviceInfo->Channel ||
4736                   (NewPhysicalDeviceInfo->Channel ==
4737                    PhysicalDeviceInfo->Channel &&
4738                    (NewPhysicalDeviceInfo->TargetID >
4739                     PhysicalDeviceInfo->TargetID ||
4740                    (NewPhysicalDeviceInfo->TargetID ==
4741                     PhysicalDeviceInfo->TargetID &&
4742                     NewPhysicalDeviceInfo->LogicalUnit >
4743                     PhysicalDeviceInfo->LogicalUnit)))))
4744             {
4745               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4746                               Controller,
4747                               PhysicalDeviceInfo->Channel,
4748                               PhysicalDeviceInfo->TargetID);
4749               Controller->V2.PhysicalDeviceInformation
4750                              [PhysicalDeviceIndex] = NULL;
4751               Controller->V2.InquiryUnitSerialNumber
4752                              [PhysicalDeviceIndex] = NULL;
4753               kfree(PhysicalDeviceInfo);
4754               kfree(InquiryUnitSerialNumber);
4755               for (DeviceIndex = PhysicalDeviceIndex;
4756                    DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
4757                    DeviceIndex++)
4758                 {
4759                   Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4760                     Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
4761                   Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4762                     Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
4763                 }
4764               Controller->V2.PhysicalDeviceInformation
4765                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4766               Controller->V2.InquiryUnitSerialNumber
4767                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4768               PhysicalDeviceInfo =
4769                 Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4770               InquiryUnitSerialNumber =
4771                 Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4772             }
4773           if (PhysicalDeviceInfo == NULL ||
4774               (NewPhysicalDeviceInfo->Channel !=
4775                PhysicalDeviceInfo->Channel) ||
4776               (NewPhysicalDeviceInfo->TargetID !=
4777                PhysicalDeviceInfo->TargetID) ||
4778               (NewPhysicalDeviceInfo->LogicalUnit !=
4779                PhysicalDeviceInfo->LogicalUnit))
4780             {
4781               PhysicalDeviceInfo =
4782                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
4783               InquiryUnitSerialNumber =
4784                   kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
4785                           GFP_ATOMIC);
4786               if (InquiryUnitSerialNumber == NULL ||
4787                   PhysicalDeviceInfo == NULL)
4788                 {
4789                   kfree(InquiryUnitSerialNumber);
4790                   InquiryUnitSerialNumber = NULL;
4791                   kfree(PhysicalDeviceInfo);
4792                   PhysicalDeviceInfo = NULL;
4793                 }
4794               DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
4795                               Controller,
4796                               NewPhysicalDeviceInfo->Channel,
4797                               NewPhysicalDeviceInfo->TargetID,
4798                               (PhysicalDeviceInfo != NULL
4799                                ? "" : " - Allocation Failed"));
4800               if (PhysicalDeviceInfo != NULL)
4801                 {
4802                   memset(PhysicalDeviceInfo, 0,
4803                          sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4804                   PhysicalDeviceInfo->PhysicalDeviceState =
4805                     DAC960_V2_Device_InvalidState;
4806                   memset(InquiryUnitSerialNumber, 0,
4807                          sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4808                   InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4809                   for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
4810                        DeviceIndex > PhysicalDeviceIndex;
4811                        DeviceIndex--)
4812                     {
4813                       Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4814                         Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
4815                       Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4816                         Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
4817                     }
4818                   Controller->V2.PhysicalDeviceInformation
4819                                  [PhysicalDeviceIndex] =
4820                     PhysicalDeviceInfo;
4821                   Controller->V2.InquiryUnitSerialNumber
4822                                  [PhysicalDeviceIndex] =
4823                     InquiryUnitSerialNumber;
4824                   Controller->V2.NeedDeviceSerialNumberInformation = true;
4825                 }
4826             }
4827           if (PhysicalDeviceInfo != NULL)
4828             {
4829               if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
4830                   PhysicalDeviceInfo->PhysicalDeviceState)
4831                 DAC960_Critical(
4832                   "Physical Device %d:%d is now %s\n", Controller,
4833                   NewPhysicalDeviceInfo->Channel,
4834                   NewPhysicalDeviceInfo->TargetID,
4835                   (NewPhysicalDeviceInfo->PhysicalDeviceState
4836                    == DAC960_V2_Device_Online
4837                    ? "ONLINE"
4838                    : NewPhysicalDeviceInfo->PhysicalDeviceState
4839                      == DAC960_V2_Device_Rebuild
4840                      ? "REBUILD"
4841                      : NewPhysicalDeviceInfo->PhysicalDeviceState
4842                        == DAC960_V2_Device_Missing
4843                        ? "MISSING"
4844                        : NewPhysicalDeviceInfo->PhysicalDeviceState
4845                          == DAC960_V2_Device_Critical
4846                          ? "CRITICAL"
4847                          : NewPhysicalDeviceInfo->PhysicalDeviceState
4848                            == DAC960_V2_Device_Dead
4849                            ? "DEAD"
4850                            : NewPhysicalDeviceInfo->PhysicalDeviceState
4851                              == DAC960_V2_Device_SuspectedDead
4852                              ? "SUSPECTED-DEAD"
4853                              : NewPhysicalDeviceInfo->PhysicalDeviceState
4854                                == DAC960_V2_Device_CommandedOffline
4855                                ? "COMMANDED-OFFLINE"
4856                                : NewPhysicalDeviceInfo->PhysicalDeviceState
4857                                  == DAC960_V2_Device_Standby
4858                                  ? "STANDBY" : "UNKNOWN"));
4859               if ((NewPhysicalDeviceInfo->ParityErrors !=
4860                    PhysicalDeviceInfo->ParityErrors) ||
4861                   (NewPhysicalDeviceInfo->SoftErrors !=
4862                    PhysicalDeviceInfo->SoftErrors) ||
4863                   (NewPhysicalDeviceInfo->HardErrors !=
4864                    PhysicalDeviceInfo->HardErrors) ||
4865                   (NewPhysicalDeviceInfo->MiscellaneousErrors !=
4866                    PhysicalDeviceInfo->MiscellaneousErrors) ||
4867                   (NewPhysicalDeviceInfo->CommandTimeouts !=
4868                    PhysicalDeviceInfo->CommandTimeouts) ||
4869                   (NewPhysicalDeviceInfo->Retries !=
4870                    PhysicalDeviceInfo->Retries) ||
4871                   (NewPhysicalDeviceInfo->Aborts !=
4872                    PhysicalDeviceInfo->Aborts) ||
4873                   (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
4874                    PhysicalDeviceInfo->PredictedFailuresDetected))
4875                 {
4876                   DAC960_Critical("Physical Device %d:%d Errors: "
4877                                   "Parity = %d, Soft = %d, "
4878                                   "Hard = %d, Misc = %d\n",
4879                                   Controller,
4880                                   NewPhysicalDeviceInfo->Channel,
4881                                   NewPhysicalDeviceInfo->TargetID,
4882                                   NewPhysicalDeviceInfo->ParityErrors,
4883                                   NewPhysicalDeviceInfo->SoftErrors,
4884                                   NewPhysicalDeviceInfo->HardErrors,
4885                                   NewPhysicalDeviceInfo->MiscellaneousErrors);
4886                   DAC960_Critical("Physical Device %d:%d Errors: "
4887                                   "Timeouts = %d, Retries = %d, "
4888                                   "Aborts = %d, Predicted = %d\n",
4889                                   Controller,
4890                                   NewPhysicalDeviceInfo->Channel,
4891                                   NewPhysicalDeviceInfo->TargetID,
4892                                   NewPhysicalDeviceInfo->CommandTimeouts,
4893                                   NewPhysicalDeviceInfo->Retries,
4894                                   NewPhysicalDeviceInfo->Aborts,
4895                                   NewPhysicalDeviceInfo
4896                                   ->PredictedFailuresDetected);
4897                 }
4898               if ((PhysicalDeviceInfo->PhysicalDeviceState
4899                    == DAC960_V2_Device_Dead ||
4900                    PhysicalDeviceInfo->PhysicalDeviceState
4901                    == DAC960_V2_Device_InvalidState) &&
4902                   NewPhysicalDeviceInfo->PhysicalDeviceState
4903                   != DAC960_V2_Device_Dead)
4904                 Controller->V2.NeedDeviceSerialNumberInformation = true;
4905               memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
4906                      sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4907             }
4908           NewPhysicalDeviceInfo->LogicalUnit++;
4909           Controller->V2.PhysicalDeviceIndex++;
4910         }
4911       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
4912         {
4913           unsigned int DeviceIndex;
4914           for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
4915                DeviceIndex < DAC960_V2_MaxPhysicalDevices;
4916                DeviceIndex++)
4917             {
4918               DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4919                 Controller->V2.PhysicalDeviceInformation[DeviceIndex];
4920               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4921                 Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
4922               if (PhysicalDeviceInfo == NULL) break;
4923               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4924                               Controller,
4925                               PhysicalDeviceInfo->Channel,
4926                               PhysicalDeviceInfo->TargetID);
4927               Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
4928               Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
4929               kfree(PhysicalDeviceInfo);
4930               kfree(InquiryUnitSerialNumber);
4931             }
4932           Controller->V2.NeedPhysicalDeviceInformation = false;
4933         }
4934       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
4935                CommandStatus == DAC960_V2_NormalCompletion)
4936         {
4937           DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
4938             Controller->V2.NewLogicalDeviceInformation;
4939           unsigned short LogicalDeviceNumber =
4940             NewLogicalDeviceInfo->LogicalDeviceNumber;
4941           DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
4942             Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
4943           if (LogicalDeviceInfo == NULL)
4944             {
4945               DAC960_V2_PhysicalDevice_T PhysicalDevice;
4946               PhysicalDevice.Controller = 0;
4947               PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
4948               PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
4949               PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
4950               Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
4951                 PhysicalDevice;
4952               LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *)
4953                 kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC);
4954               Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
4955                 LogicalDeviceInfo;
4956               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4957                               "Now Exists%s\n", Controller,
4958                               LogicalDeviceNumber,
4959                               Controller->ControllerNumber,
4960                               LogicalDeviceNumber,
4961                               (LogicalDeviceInfo != NULL
4962                                ? "" : " - Allocation Failed"));
4963               if (LogicalDeviceInfo != NULL)
4964                 {
4965                   memset(LogicalDeviceInfo, 0,
4966                          sizeof(DAC960_V2_LogicalDeviceInfo_T));
4967                   DAC960_ComputeGenericDiskInfo(Controller);
4968                 }
4969             }
4970           if (LogicalDeviceInfo != NULL)
4971             {
4972               unsigned long LogicalDeviceSize =
4973                 NewLogicalDeviceInfo->ConfigurableDeviceSize;
4974               if (NewLogicalDeviceInfo->LogicalDeviceState !=
4975                   LogicalDeviceInfo->LogicalDeviceState)
4976                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4977                                 "is now %s\n", Controller,
4978                                 LogicalDeviceNumber,
4979                                 Controller->ControllerNumber,
4980                                 LogicalDeviceNumber,
4981                                 (NewLogicalDeviceInfo->LogicalDeviceState
4982                                  == DAC960_V2_LogicalDevice_Online
4983                                  ? "ONLINE"
4984                                  : NewLogicalDeviceInfo->LogicalDeviceState
4985                                    == DAC960_V2_LogicalDevice_Critical
4986                                    ? "CRITICAL" : "OFFLINE"));
4987               if ((NewLogicalDeviceInfo->SoftErrors !=
4988                    LogicalDeviceInfo->SoftErrors) ||
4989                   (NewLogicalDeviceInfo->CommandsFailed !=
4990                    LogicalDeviceInfo->CommandsFailed) ||
4991                   (NewLogicalDeviceInfo->DeferredWriteErrors !=
4992                    LogicalDeviceInfo->DeferredWriteErrors))
4993                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
4994                                 "Soft = %d, Failed = %d, Deferred Write = %d\n",
4995                                 Controller, LogicalDeviceNumber,
4996                                 Controller->ControllerNumber,
4997                                 LogicalDeviceNumber,
4998                                 NewLogicalDeviceInfo->SoftErrors,
4999                                 NewLogicalDeviceInfo->CommandsFailed,
5000                                 NewLogicalDeviceInfo->DeferredWriteErrors);
5001               if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
5002                 DAC960_V2_ReportProgress(Controller,
5003                                          "Consistency Check",
5004                                          LogicalDeviceNumber,
5005                                          NewLogicalDeviceInfo
5006                                          ->ConsistencyCheckBlockNumber,
5007                                          LogicalDeviceSize);
5008               else if (NewLogicalDeviceInfo->RebuildInProgress)
5009                 DAC960_V2_ReportProgress(Controller,
5010                                          "Rebuild",
5011                                          LogicalDeviceNumber,
5012                                          NewLogicalDeviceInfo
5013                                          ->RebuildBlockNumber,
5014                                          LogicalDeviceSize);
5015               else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5016                 DAC960_V2_ReportProgress(Controller,
5017                                          "Background Initialization",
5018                                          LogicalDeviceNumber,
5019                                          NewLogicalDeviceInfo
5020                                          ->BackgroundInitializationBlockNumber,
5021                                          LogicalDeviceSize);
5022               else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
5023                 DAC960_V2_ReportProgress(Controller,
5024                                          "Foreground Initialization",
5025                                          LogicalDeviceNumber,
5026                                          NewLogicalDeviceInfo
5027                                          ->ForegroundInitializationBlockNumber,
5028                                          LogicalDeviceSize);
5029               else if (NewLogicalDeviceInfo->DataMigrationInProgress)
5030                 DAC960_V2_ReportProgress(Controller,
5031                                          "Data Migration",
5032                                          LogicalDeviceNumber,
5033                                          NewLogicalDeviceInfo
5034                                          ->DataMigrationBlockNumber,
5035                                          LogicalDeviceSize);
5036               else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
5037                 DAC960_V2_ReportProgress(Controller,
5038                                          "Patrol Operation",
5039                                          LogicalDeviceNumber,
5040                                          NewLogicalDeviceInfo
5041                                          ->PatrolOperationBlockNumber,
5042                                          LogicalDeviceSize);
5043               if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
5044                   !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5045                 DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
5046                                 "Background Initialization %s\n",
5047                                 Controller,
5048                                 LogicalDeviceNumber,
5049                                 Controller->ControllerNumber,
5050                                 LogicalDeviceNumber,
5051                                 (NewLogicalDeviceInfo->LogicalDeviceControl
5052                                                       .LogicalDeviceInitialized
5053                                  ? "Completed" : "Failed"));
5054               memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
5055                      sizeof(DAC960_V2_LogicalDeviceInfo_T));
5056             }
5057           Controller->V2.LogicalDriveFoundDuringScan
5058                          [LogicalDeviceNumber] = true;
5059           NewLogicalDeviceInfo->LogicalDeviceNumber++;
5060         }
5061       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
5062         {
5063           int LogicalDriveNumber;
5064           for (LogicalDriveNumber = 0;
5065                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5066                LogicalDriveNumber++)
5067             {
5068               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5069                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5070               if (LogicalDeviceInfo == NULL ||
5071                   Controller->V2.LogicalDriveFoundDuringScan
5072                                  [LogicalDriveNumber])
5073                 continue;
5074               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
5075                               "No Longer Exists\n", Controller,
5076                               LogicalDriveNumber,
5077                               Controller->ControllerNumber,
5078                               LogicalDriveNumber);
5079               Controller->V2.LogicalDeviceInformation
5080                              [LogicalDriveNumber] = NULL;
5081               kfree(LogicalDeviceInfo);
5082               Controller->LogicalDriveInitiallyAccessible
5083                           [LogicalDriveNumber] = false;
5084               DAC960_ComputeGenericDiskInfo(Controller);
5085             }
5086           Controller->V2.NeedLogicalDeviceInformation = false;
5087         }
5088       else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
5089         {
5090             DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5091                 Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
5092
5093             if (CommandStatus != DAC960_V2_NormalCompletion) {
5094                 memset(InquiryUnitSerialNumber,
5095                         0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5096                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5097             } else
5098                 memcpy(InquiryUnitSerialNumber,
5099                         Controller->V2.NewInquiryUnitSerialNumber,
5100                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5101
5102              Controller->V2.NeedDeviceSerialNumberInformation = false;
5103         }
5104
5105       if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5106           - Controller->V2.NextEventSequenceNumber > 0)
5107         {
5108           CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
5109           CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
5110           CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
5111             Controller->V2.NextEventSequenceNumber >> 16;
5112           CommandMailbox->GetEvent.ControllerNumber = 0;
5113           CommandMailbox->GetEvent.IOCTL_Opcode =
5114             DAC960_V2_GetEvent;
5115           CommandMailbox->GetEvent.EventSequenceNumberLow16 =
5116             Controller->V2.NextEventSequenceNumber & 0xFFFF;
5117           CommandMailbox->GetEvent.DataTransferMemoryAddress
5118                                   .ScatterGatherSegments[0]
5119                                   .SegmentDataPointer =
5120             Controller->V2.EventDMA;
5121           CommandMailbox->GetEvent.DataTransferMemoryAddress
5122                                   .ScatterGatherSegments[0]
5123                                   .SegmentByteCount =
5124             CommandMailbox->GetEvent.DataTransferSize;
5125           DAC960_QueueCommand(Command);
5126           return;
5127         }
5128       if (Controller->V2.NeedPhysicalDeviceInformation)
5129         {
5130           if (Controller->V2.NeedDeviceSerialNumberInformation)
5131             {
5132               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5133                 Controller->V2.NewInquiryUnitSerialNumber;
5134               InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5135
5136               DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
5137                         Controller->V2.NewPhysicalDeviceInformation->Channel,
5138                         Controller->V2.NewPhysicalDeviceInformation->TargetID,
5139                 Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
5140
5141
5142               DAC960_QueueCommand(Command);
5143               return;
5144             }
5145           if (Controller->V2.StartPhysicalDeviceInformationScan)
5146             {
5147               Controller->V2.PhysicalDeviceIndex = 0;
5148               Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
5149               Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
5150               Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
5151               Controller->V2.StartPhysicalDeviceInformationScan = false;
5152             }
5153           CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5154           CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
5155             sizeof(DAC960_V2_PhysicalDeviceInfo_T);
5156           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
5157             Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
5158           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
5159             Controller->V2.NewPhysicalDeviceInformation->TargetID;
5160           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
5161             Controller->V2.NewPhysicalDeviceInformation->Channel;
5162           CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
5163             DAC960_V2_GetPhysicalDeviceInfoValid;
5164           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5165                                             .ScatterGatherSegments[0]
5166                                             .SegmentDataPointer =
5167             Controller->V2.NewPhysicalDeviceInformationDMA;
5168           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5169                                             .ScatterGatherSegments[0]
5170                                             .SegmentByteCount =
5171             CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
5172           DAC960_QueueCommand(Command);
5173           return;
5174         }
5175       if (Controller->V2.NeedLogicalDeviceInformation)
5176         {
5177           if (Controller->V2.StartLogicalDeviceInformationScan)
5178             {
5179               int LogicalDriveNumber;
5180               for (LogicalDriveNumber = 0;
5181                    LogicalDriveNumber < DAC960_MaxLogicalDrives;
5182                    LogicalDriveNumber++)
5183                 Controller->V2.LogicalDriveFoundDuringScan
5184                                [LogicalDriveNumber] = false;
5185               Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
5186               Controller->V2.StartLogicalDeviceInformationScan = false;
5187             }
5188           CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5189           CommandMailbox->LogicalDeviceInfo.DataTransferSize =
5190             sizeof(DAC960_V2_LogicalDeviceInfo_T);
5191           CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
5192             Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
5193           CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
5194             DAC960_V2_GetLogicalDeviceInfoValid;
5195           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5196                                            .ScatterGatherSegments[0]
5197                                            .SegmentDataPointer =
5198             Controller->V2.NewLogicalDeviceInformationDMA;
5199           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5200                                            .ScatterGatherSegments[0]
5201                                            .SegmentByteCount =
5202             CommandMailbox->LogicalDeviceInfo.DataTransferSize;
5203           DAC960_QueueCommand(Command);
5204           return;
5205         }
5206       Controller->MonitoringTimerCount++;
5207       Controller->MonitoringTimer.expires =
5208         jiffies + DAC960_HealthStatusMonitoringInterval;
5209         add_timer(&Controller->MonitoringTimer);
5210     }
5211   if (CommandType == DAC960_ImmediateCommand)
5212     {
5213       complete(Command->Completion);
5214       Command->Completion = NULL;
5215       return;
5216     }
5217   if (CommandType == DAC960_QueuedCommand)
5218     {
5219       DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
5220       KernelCommand->CommandStatus = CommandStatus;
5221       KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
5222       KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
5223       Command->V2.KernelCommand = NULL;
5224       DAC960_DeallocateCommand(Command);
5225       KernelCommand->CompletionFunction(KernelCommand);
5226       return;
5227     }
5228   /*
5229     Queue a Status Monitoring Command to the Controller using the just
5230     completed Command if one was deferred previously due to lack of a
5231     free Command when the Monitoring Timer Function was called.
5232   */
5233   if (Controller->MonitoringCommandDeferred)
5234     {
5235       Controller->MonitoringCommandDeferred = false;
5236       DAC960_V2_QueueMonitoringCommand(Command);
5237       return;
5238     }
5239   /*
5240     Deallocate the Command.
5241   */
5242   DAC960_DeallocateCommand(Command);
5243   /*
5244     Wake up any processes waiting on a free Command.
5245   */
5246   wake_up(&Controller->CommandWaitQueue);
5247 }
5248
5249 /*
5250   DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
5251   Controllers.
5252 */
5253
5254 static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
5255                                        void *DeviceIdentifier)
5256 {
5257   DAC960_Controller_T *Controller = DeviceIdentifier;
5258   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5259   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5260   unsigned long flags;
5261
5262   spin_lock_irqsave(&Controller->queue_lock, flags);
5263   DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
5264   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5265   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5266     {
5267        DAC960_V2_CommandIdentifier_T CommandIdentifier =
5268            NextStatusMailbox->Fields.CommandIdentifier;
5269        DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5270        Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5271        Command->V2.RequestSenseLength =
5272            NextStatusMailbox->Fields.RequestSenseLength;
5273        Command->V2.DataTransferResidue =
5274            NextStatusMailbox->Fields.DataTransferResidue;
5275        NextStatusMailbox->Words[0] = 0;
5276        if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5277            NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5278        DAC960_V2_ProcessCompletedCommand(Command);
5279     }
5280   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5281   /*
5282     Attempt to remove additional I/O Requests from the Controller's
5283     I/O Request Queue and queue them to the Controller.
5284   */
5285   DAC960_ProcessRequest(Controller);
5286   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5287   return IRQ_HANDLED;
5288 }
5289
5290 /*
5291   DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
5292   Controllers.
5293 */
5294
5295 static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
5296                                        void *DeviceIdentifier)
5297 {
5298   DAC960_Controller_T *Controller = DeviceIdentifier;
5299   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5300   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5301   unsigned long flags;
5302
5303   spin_lock_irqsave(&Controller->queue_lock, flags);
5304   DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
5305   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5306   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5307     {
5308       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5309         NextStatusMailbox->Fields.CommandIdentifier;
5310       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5311       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5312       Command->V2.RequestSenseLength =
5313         NextStatusMailbox->Fields.RequestSenseLength;
5314       Command->V2.DataTransferResidue =
5315         NextStatusMailbox->Fields.DataTransferResidue;
5316       NextStatusMailbox->Words[0] = 0;
5317       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5318         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5319       DAC960_V2_ProcessCompletedCommand(Command);
5320     }
5321   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5322   /*
5323     Attempt to remove additional I/O Requests from the Controller's
5324     I/O Request Queue and queue them to the Controller.
5325   */
5326   DAC960_ProcessRequest(Controller);
5327   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5328   return IRQ_HANDLED;
5329 }
5330
5331
5332 /*
5333   DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
5334   Controllers.
5335 */
5336
5337 static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
5338                                        void *DeviceIdentifier)
5339 {
5340   DAC960_Controller_T *Controller = DeviceIdentifier;
5341   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5342   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5343   unsigned long flags;
5344
5345   spin_lock_irqsave(&Controller->queue_lock, flags);
5346   DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
5347   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5348   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5349     {
5350       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5351         NextStatusMailbox->Fields.CommandIdentifier;
5352       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5353       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5354       Command->V2.RequestSenseLength =
5355         NextStatusMailbox->Fields.RequestSenseLength;
5356       Command->V2.DataTransferResidue =
5357         NextStatusMailbox->Fields.DataTransferResidue;
5358       NextStatusMailbox->Words[0] = 0;
5359       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5360         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5361       DAC960_V2_ProcessCompletedCommand(Command);
5362     }
5363   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5364   /*
5365     Attempt to remove additional I/O Requests from the Controller's
5366     I/O Request Queue and queue them to the Controller.
5367   */
5368   DAC960_ProcessRequest(Controller);
5369   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5370   return IRQ_HANDLED;
5371 }
5372
5373
5374 /*
5375   DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
5376   Controllers.
5377 */
5378
5379 static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
5380                                        void *DeviceIdentifier)
5381 {
5382   DAC960_Controller_T *Controller = DeviceIdentifier;
5383   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5384   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5385   unsigned long flags;
5386
5387   spin_lock_irqsave(&Controller->queue_lock, flags);
5388   DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
5389   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5390   while (NextStatusMailbox->Fields.Valid)
5391     {
5392       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5393         NextStatusMailbox->Fields.CommandIdentifier;
5394       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5395       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5396       NextStatusMailbox->Word = 0;
5397       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5398         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5399       DAC960_V1_ProcessCompletedCommand(Command);
5400     }
5401   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5402   /*
5403     Attempt to remove additional I/O Requests from the Controller's
5404     I/O Request Queue and queue them to the Controller.
5405   */
5406   DAC960_ProcessRequest(Controller);
5407   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5408   return IRQ_HANDLED;
5409 }
5410
5411
5412 /*
5413   DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
5414   Controllers.
5415 */
5416
5417 static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
5418                                        void *DeviceIdentifier)
5419 {
5420   DAC960_Controller_T *Controller = DeviceIdentifier;
5421   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5422   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5423   unsigned long flags;
5424
5425   spin_lock_irqsave(&Controller->queue_lock, flags);
5426   DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
5427   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5428   while (NextStatusMailbox->Fields.Valid)
5429     {
5430       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5431         NextStatusMailbox->Fields.CommandIdentifier;
5432       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5433       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5434       NextStatusMailbox->Word = 0;
5435       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5436         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5437       DAC960_V1_ProcessCompletedCommand(Command);
5438     }
5439   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5440   /*
5441     Attempt to remove additional I/O Requests from the Controller's
5442     I/O Request Queue and queue them to the Controller.
5443   */
5444   DAC960_ProcessRequest(Controller);
5445   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5446   return IRQ_HANDLED;
5447 }
5448
5449
5450 /*
5451   DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
5452   Controllers.
5453 */
5454
5455 static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
5456                                        void *DeviceIdentifier)
5457 {
5458   DAC960_Controller_T *Controller = DeviceIdentifier;
5459   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5460   unsigned long flags;
5461
5462   spin_lock_irqsave(&Controller->queue_lock, flags);
5463   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5464     {
5465       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5466         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5467       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5468       Command->V1.CommandStatus =
5469         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5470       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5471       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5472       DAC960_V1_ProcessCompletedCommand(Command);
5473     }
5474   /*
5475     Attempt to remove additional I/O Requests from the Controller's
5476     I/O Request Queue and queue them to the Controller.
5477   */
5478   DAC960_ProcessRequest(Controller);
5479   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5480   return IRQ_HANDLED;
5481 }
5482
5483
5484 /*
5485   DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
5486   Controllers.
5487
5488   Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
5489   on the data having been placed into DAC960_Controller_T, rather than
5490   an arbitrary buffer.
5491 */
5492
5493 static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
5494                                       void *DeviceIdentifier)
5495 {
5496   DAC960_Controller_T *Controller = DeviceIdentifier;
5497   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5498   unsigned long flags;
5499
5500   spin_lock_irqsave(&Controller->queue_lock, flags);
5501   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5502     {
5503       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5504         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5505       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5506       DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5507       DAC960_V1_CommandOpcode_T CommandOpcode =
5508         CommandMailbox->Common.CommandOpcode;
5509       Command->V1.CommandStatus =
5510         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5511       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5512       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5513       switch (CommandOpcode)
5514         {
5515         case DAC960_V1_Enquiry_Old:
5516           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
5517           DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
5518           break;
5519         case DAC960_V1_GetDeviceState_Old:
5520           Command->V1.CommandMailbox.Common.CommandOpcode =
5521                                                 DAC960_V1_GetDeviceState;
5522           DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
5523           break;
5524         case DAC960_V1_Read_Old:
5525           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
5526           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5527           break;
5528         case DAC960_V1_Write_Old:
5529           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
5530           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5531           break;
5532         case DAC960_V1_ReadWithScatterGather_Old:
5533           Command->V1.CommandMailbox.Common.CommandOpcode =
5534             DAC960_V1_ReadWithScatterGather;
5535           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5536           break;
5537         case DAC960_V1_WriteWithScatterGather_Old:
5538           Command->V1.CommandMailbox.Common.CommandOpcode =
5539             DAC960_V1_WriteWithScatterGather;
5540           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5541           break;
5542         default:
5543           break;
5544         }
5545       DAC960_V1_ProcessCompletedCommand(Command);
5546     }
5547   /*
5548     Attempt to remove additional I/O Requests from the Controller's
5549     I/O Request Queue and queue them to the Controller.
5550   */
5551   DAC960_ProcessRequest(Controller);
5552   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5553   return IRQ_HANDLED;
5554 }
5555
5556
5557 /*
5558   DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
5559   Firmware Controllers.
5560 */
5561
5562 static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
5563 {
5564   DAC960_Controller_T *Controller = Command->Controller;
5565   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5566   DAC960_V1_ClearCommand(Command);
5567   Command->CommandType = DAC960_MonitoringCommand;
5568   CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
5569   CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
5570   DAC960_QueueCommand(Command);
5571 }
5572
5573
5574 /*
5575   DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
5576   Firmware Controllers.
5577 */
5578
5579 static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
5580 {
5581   DAC960_Controller_T *Controller = Command->Controller;
5582   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
5583   DAC960_V2_ClearCommand(Command);
5584   Command->CommandType = DAC960_MonitoringCommand;
5585   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
5586   CommandMailbox->ControllerInfo.CommandControlBits
5587                                 .DataTransferControllerToHost = true;
5588   CommandMailbox->ControllerInfo.CommandControlBits
5589                                 .NoAutoRequestSense = true;
5590   CommandMailbox->ControllerInfo.DataTransferSize =
5591     sizeof(DAC960_V2_ControllerInfo_T);
5592   CommandMailbox->ControllerInfo.ControllerNumber = 0;
5593   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
5594   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5595                                 .ScatterGatherSegments[0]
5596                                 .SegmentDataPointer =
5597     Controller->V2.NewControllerInformationDMA;
5598   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5599                                 .ScatterGatherSegments[0]
5600                                 .SegmentByteCount =
5601     CommandMailbox->ControllerInfo.DataTransferSize;
5602   DAC960_QueueCommand(Command);
5603 }
5604
5605
5606 /*
5607   DAC960_MonitoringTimerFunction is the timer function for monitoring
5608   the status of DAC960 Controllers.
5609 */
5610
5611 static void DAC960_MonitoringTimerFunction(unsigned long TimerData)
5612 {
5613   DAC960_Controller_T *Controller = (DAC960_Controller_T *) TimerData;
5614   DAC960_Command_T *Command;
5615   unsigned long flags;
5616
5617   if (Controller->FirmwareType == DAC960_V1_Controller)
5618     {
5619       spin_lock_irqsave(&Controller->queue_lock, flags);
5620       /*
5621         Queue a Status Monitoring Command to Controller.
5622       */
5623       Command = DAC960_AllocateCommand(Controller);
5624       if (Command != NULL)
5625         DAC960_V1_QueueMonitoringCommand(Command);
5626       else Controller->MonitoringCommandDeferred = true;
5627       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5628     }
5629   else
5630     {
5631       DAC960_V2_ControllerInfo_T *ControllerInfo =
5632         &Controller->V2.ControllerInformation;
5633       unsigned int StatusChangeCounter =
5634         Controller->V2.HealthStatusBuffer->StatusChangeCounter;
5635       boolean ForceMonitoringCommand = false;
5636       if (time_after(jiffies, Controller->SecondaryMonitoringTime
5637           + DAC960_SecondaryMonitoringInterval))
5638         {
5639           int LogicalDriveNumber;
5640           for (LogicalDriveNumber = 0;
5641                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5642                LogicalDriveNumber++)
5643             {
5644               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5645                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5646               if (LogicalDeviceInfo == NULL) continue;
5647               if (!LogicalDeviceInfo->LogicalDeviceControl
5648                                      .LogicalDeviceInitialized)
5649                 {
5650                   ForceMonitoringCommand = true;
5651                   break;
5652                 }
5653             }
5654           Controller->SecondaryMonitoringTime = jiffies;
5655         }
5656       if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
5657           Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5658           == Controller->V2.NextEventSequenceNumber &&
5659           (ControllerInfo->BackgroundInitializationsActive +
5660            ControllerInfo->LogicalDeviceInitializationsActive +
5661            ControllerInfo->PhysicalDeviceInitializationsActive +
5662            ControllerInfo->ConsistencyChecksActive +
5663            ControllerInfo->RebuildsActive +
5664            ControllerInfo->OnlineExpansionsActive == 0 ||
5665            time_before(jiffies, Controller->PrimaryMonitoringTime
5666            + DAC960_MonitoringTimerInterval)) &&
5667           !ForceMonitoringCommand)
5668         {
5669           Controller->MonitoringTimer.expires =
5670             jiffies + DAC960_HealthStatusMonitoringInterval;
5671             add_timer(&Controller->MonitoringTimer);
5672           return;
5673         }
5674       Controller->V2.StatusChangeCounter = StatusChangeCounter;
5675       Controller->PrimaryMonitoringTime = jiffies;
5676
5677       spin_lock_irqsave(&Controller->queue_lock, flags);
5678       /*
5679         Queue a Status Monitoring Command to Controller.
5680       */
5681       Command = DAC960_AllocateCommand(Controller);
5682       if (Command != NULL)
5683         DAC960_V2_QueueMonitoringCommand(Command);
5684       else Controller->MonitoringCommandDeferred = true;
5685       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5686       /*
5687         Wake up any processes waiting on a Health Status Buffer change.
5688       */
5689       wake_up(&Controller->HealthStatusWaitQueue);
5690     }
5691 }
5692
5693 /*
5694   DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
5695   additional bytes in the Combined Status Buffer and grows the buffer if
5696   necessary.  It returns true if there is enough room and false otherwise.
5697 */
5698
5699 static boolean DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
5700                                         unsigned int ByteCount)
5701 {
5702   unsigned char *NewStatusBuffer;
5703   if (Controller->InitialStatusLength + 1 +
5704       Controller->CurrentStatusLength + ByteCount + 1 <=
5705       Controller->CombinedStatusBufferLength)
5706     return true;
5707   if (Controller->CombinedStatusBufferLength == 0)
5708     {
5709       unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
5710       while (NewStatusBufferLength < ByteCount)
5711         NewStatusBufferLength *= 2;
5712       Controller->CombinedStatusBuffer =
5713         (unsigned char *) kmalloc(NewStatusBufferLength, GFP_ATOMIC);
5714       if (Controller->CombinedStatusBuffer == NULL) return false;
5715       Controller->CombinedStatusBufferLength = NewStatusBufferLength;
5716       return true;
5717     }
5718   NewStatusBuffer = (unsigned char *)
5719     kmalloc(2 * Controller->CombinedStatusBufferLength, GFP_ATOMIC);
5720   if (NewStatusBuffer == NULL)
5721     {
5722       DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
5723                      Controller);
5724       return false;
5725     }
5726   memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
5727          Controller->CombinedStatusBufferLength);
5728   kfree(Controller->CombinedStatusBuffer);
5729   Controller->CombinedStatusBuffer = NewStatusBuffer;
5730   Controller->CombinedStatusBufferLength *= 2;
5731   Controller->CurrentStatusBuffer =
5732     &NewStatusBuffer[Controller->InitialStatusLength + 1];
5733   return true;
5734 }
5735
5736
5737 /*
5738   DAC960_Message prints Driver Messages.
5739 */
5740
5741 static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
5742                            unsigned char *Format,
5743                            DAC960_Controller_T *Controller,
5744                            ...)
5745 {
5746   static unsigned char Buffer[DAC960_LineBufferSize];
5747   static boolean BeginningOfLine = true;
5748   va_list Arguments;
5749   int Length = 0;
5750   va_start(Arguments, Controller);
5751   Length = vsprintf(Buffer, Format, Arguments);
5752   va_end(Arguments);
5753   if (Controller == NULL)
5754     printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5755            DAC960_ControllerCount, Buffer);
5756   else if (MessageLevel == DAC960_AnnounceLevel ||
5757            MessageLevel == DAC960_InfoLevel)
5758     {
5759       if (!Controller->ControllerInitialized)
5760         {
5761           if (DAC960_CheckStatusBuffer(Controller, Length))
5762             {
5763               strcpy(&Controller->CombinedStatusBuffer
5764                                   [Controller->InitialStatusLength],
5765                      Buffer);
5766               Controller->InitialStatusLength += Length;
5767               Controller->CurrentStatusBuffer =
5768                 &Controller->CombinedStatusBuffer
5769                              [Controller->InitialStatusLength + 1];
5770             }
5771           if (MessageLevel == DAC960_AnnounceLevel)
5772             {
5773               static int AnnouncementLines = 0;
5774               if (++AnnouncementLines <= 2)
5775                 printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
5776                        Buffer);
5777             }
5778           else
5779             {
5780               if (BeginningOfLine)
5781                 {
5782                   if (Buffer[0] != '\n' || Length > 1)
5783                     printk("%sDAC960#%d: %s",
5784                            DAC960_MessageLevelMap[MessageLevel],
5785                            Controller->ControllerNumber, Buffer);
5786                 }
5787               else printk("%s", Buffer);
5788             }
5789         }
5790       else if (DAC960_CheckStatusBuffer(Controller, Length))
5791         {
5792           strcpy(&Controller->CurrentStatusBuffer[
5793                     Controller->CurrentStatusLength], Buffer);
5794           Controller->CurrentStatusLength += Length;
5795         }
5796     }
5797   else if (MessageLevel == DAC960_ProgressLevel)
5798     {
5799       strcpy(Controller->ProgressBuffer, Buffer);
5800       Controller->ProgressBufferLength = Length;
5801       if (Controller->EphemeralProgressMessage)
5802         {
5803           if (time_after_eq(jiffies, Controller->LastProgressReportTime
5804               + DAC960_ProgressReportingInterval))
5805             {
5806               printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5807                      Controller->ControllerNumber, Buffer);
5808               Controller->LastProgressReportTime = jiffies;
5809             }
5810         }
5811       else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5812                   Controller->ControllerNumber, Buffer);
5813     }
5814   else if (MessageLevel == DAC960_UserCriticalLevel)
5815     {
5816       strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
5817              Buffer);
5818       Controller->UserStatusLength += Length;
5819       if (Buffer[0] != '\n' || Length > 1)
5820         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5821                Controller->ControllerNumber, Buffer);
5822     }
5823   else
5824     {
5825       if (BeginningOfLine)
5826         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5827                Controller->ControllerNumber, Buffer);
5828       else printk("%s", Buffer);
5829     }
5830   BeginningOfLine = (Buffer[Length-1] == '\n');
5831 }
5832
5833
5834 /*
5835   DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
5836   Channel:TargetID specification from a User Command string.  It updates
5837   Channel and TargetID and returns true on success and false on failure.
5838 */
5839
5840 static boolean DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
5841                                           char *UserCommandString,
5842                                           unsigned char *Channel,
5843                                           unsigned char *TargetID)
5844 {
5845   char *NewUserCommandString = UserCommandString;
5846   unsigned long XChannel, XTargetID;
5847   while (*UserCommandString == ' ') UserCommandString++;
5848   if (UserCommandString == NewUserCommandString)
5849     return false;
5850   XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5851   if (NewUserCommandString == UserCommandString ||
5852       *NewUserCommandString != ':' ||
5853       XChannel >= Controller->Channels)
5854     return false;
5855   UserCommandString = ++NewUserCommandString;
5856   XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5857   if (NewUserCommandString == UserCommandString ||
5858       *NewUserCommandString != '\0' ||
5859       XTargetID >= Controller->Targets)
5860     return false;
5861   *Channel = XChannel;
5862   *TargetID = XTargetID;
5863   return true;
5864 }
5865
5866
5867 /*
5868   DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
5869   specification from a User Command string.  It updates LogicalDriveNumber and
5870   returns true on success and false on failure.
5871 */
5872
5873 static boolean DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
5874                                         char *UserCommandString,
5875                                         unsigned char *LogicalDriveNumber)
5876 {
5877   char *NewUserCommandString = UserCommandString;
5878   unsigned long XLogicalDriveNumber;
5879   while (*UserCommandString == ' ') UserCommandString++;
5880   if (UserCommandString == NewUserCommandString)
5881     return false;
5882   XLogicalDriveNumber =
5883     simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5884   if (NewUserCommandString == UserCommandString ||
5885       *NewUserCommandString != '\0' ||
5886       XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
5887     return false;
5888   *LogicalDriveNumber = XLogicalDriveNumber;
5889   return true;
5890 }
5891
5892
5893 /*
5894   DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
5895   DAC960 V1 Firmware Controllers.
5896 */
5897
5898 static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
5899                                      DAC960_Command_T *Command,
5900                                      unsigned char Channel,
5901                                      unsigned char TargetID,
5902                                      DAC960_V1_PhysicalDeviceState_T
5903                                        DeviceState,
5904                                      const unsigned char *DeviceStateString)
5905 {
5906   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5907   CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
5908   CommandMailbox->Type3D.Channel = Channel;
5909   CommandMailbox->Type3D.TargetID = TargetID;
5910   CommandMailbox->Type3D.DeviceState = DeviceState;
5911   CommandMailbox->Type3D.Modifier = 0;
5912   DAC960_ExecuteCommand(Command);
5913   switch (Command->V1.CommandStatus)
5914     {
5915     case DAC960_V1_NormalCompletion:
5916       DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
5917                           DeviceStateString, Channel, TargetID);
5918       break;
5919     case DAC960_V1_UnableToStartDevice:
5920       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5921                           "Unable to Start Device\n", Controller,
5922                           DeviceStateString, Channel, TargetID);
5923       break;
5924     case DAC960_V1_NoDeviceAtAddress:
5925       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5926                           "No Device at Address\n", Controller,
5927                           DeviceStateString, Channel, TargetID);
5928       break;
5929     case DAC960_V1_InvalidChannelOrTargetOrModifier:
5930       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5931                           "Invalid Channel or Target or Modifier\n",
5932                           Controller, DeviceStateString, Channel, TargetID);
5933       break;
5934     case DAC960_V1_ChannelBusy:
5935       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5936                           "Channel Busy\n", Controller,
5937                           DeviceStateString, Channel, TargetID);
5938       break;
5939     default:
5940       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5941                           "Unexpected Status %04X\n", Controller,
5942                           DeviceStateString, Channel, TargetID,
5943                           Command->V1.CommandStatus);
5944       break;
5945     }
5946 }
5947
5948
5949 /*
5950   DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
5951   Controllers.
5952 */
5953
5954 static boolean DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
5955                                             unsigned char *UserCommand)
5956 {
5957   DAC960_Command_T *Command;
5958   DAC960_V1_CommandMailbox_T *CommandMailbox;
5959   unsigned long flags;
5960   unsigned char Channel, TargetID, LogicalDriveNumber;
5961
5962   spin_lock_irqsave(&Controller->queue_lock, flags);
5963   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
5964     DAC960_WaitForCommand(Controller);
5965   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5966   Controller->UserStatusLength = 0;
5967   DAC960_V1_ClearCommand(Command);
5968   Command->CommandType = DAC960_ImmediateCommand;
5969   CommandMailbox = &Command->V1.CommandMailbox;
5970   if (strcmp(UserCommand, "flush-cache") == 0)
5971     {
5972       CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
5973       DAC960_ExecuteCommand(Command);
5974       DAC960_UserCritical("Cache Flush Completed\n", Controller);
5975     }
5976   else if (strncmp(UserCommand, "kill", 4) == 0 &&
5977            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
5978                                       &Channel, &TargetID))
5979     {
5980       DAC960_V1_DeviceState_T *DeviceState =
5981         &Controller->V1.DeviceState[Channel][TargetID];
5982       if (DeviceState->Present &&
5983           DeviceState->DeviceType == DAC960_V1_DiskType &&
5984           DeviceState->DeviceState != DAC960_V1_Device_Dead)
5985         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
5986                                  DAC960_V1_Device_Dead, "Kill");
5987       else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
5988                                Controller, Channel, TargetID);
5989     }
5990   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
5991            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
5992                                       &Channel, &TargetID))
5993     {
5994       DAC960_V1_DeviceState_T *DeviceState =
5995         &Controller->V1.DeviceState[Channel][TargetID];
5996       if (DeviceState->Present &&
5997           DeviceState->DeviceType == DAC960_V1_DiskType &&
5998           DeviceState->DeviceState == DAC960_V1_Device_Dead)
5999         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6000                                  DAC960_V1_Device_Online, "Make Online");
6001       else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
6002                                Controller, Channel, TargetID);
6003
6004     }
6005   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6006            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6007                                       &Channel, &TargetID))
6008     {
6009       DAC960_V1_DeviceState_T *DeviceState =
6010         &Controller->V1.DeviceState[Channel][TargetID];
6011       if (DeviceState->Present &&
6012           DeviceState->DeviceType == DAC960_V1_DiskType &&
6013           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6014         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6015                                  DAC960_V1_Device_Standby, "Make Standby");
6016       else DAC960_UserCritical("Make Standby of Physical "
6017                                "Device %d:%d Illegal\n",
6018                                Controller, Channel, TargetID);
6019     }
6020   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6021            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6022                                       &Channel, &TargetID))
6023     {
6024       CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
6025       CommandMailbox->Type3D.Channel = Channel;
6026       CommandMailbox->Type3D.TargetID = TargetID;
6027       DAC960_ExecuteCommand(Command);
6028       switch (Command->V1.CommandStatus)
6029         {
6030         case DAC960_V1_NormalCompletion:
6031           DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
6032                               Controller, Channel, TargetID);
6033           break;
6034         case DAC960_V1_AttemptToRebuildOnlineDrive:
6035           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6036                               "Attempt to Rebuild Online or "
6037                               "Unresponsive Drive\n",
6038                               Controller, Channel, TargetID);
6039           break;
6040         case DAC960_V1_NewDiskFailedDuringRebuild:
6041           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6042                               "New Disk Failed During Rebuild\n",
6043                               Controller, Channel, TargetID);
6044           break;
6045         case DAC960_V1_InvalidDeviceAddress:
6046           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6047                               "Invalid Device Address\n",
6048                               Controller, Channel, TargetID);
6049           break;
6050         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6051           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6052                               "Rebuild or Consistency Check Already "
6053                               "in Progress\n", Controller, Channel, TargetID);
6054           break;
6055         default:
6056           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6057                               "Unexpected Status %04X\n", Controller,
6058                               Channel, TargetID, Command->V1.CommandStatus);
6059           break;
6060         }
6061     }
6062   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6063            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6064                                     &LogicalDriveNumber))
6065     {
6066       CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
6067       CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
6068       CommandMailbox->Type3C.AutoRestore = true;
6069       DAC960_ExecuteCommand(Command);
6070       switch (Command->V1.CommandStatus)
6071         {
6072         case DAC960_V1_NormalCompletion:
6073           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6074                               "(/dev/rd/c%dd%d) Initiated\n",
6075                               Controller, LogicalDriveNumber,
6076                               Controller->ControllerNumber,
6077                               LogicalDriveNumber);
6078           break;
6079         case DAC960_V1_DependentDiskIsDead:
6080           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6081                               "(/dev/rd/c%dd%d) Failed - "
6082                               "Dependent Physical Device is DEAD\n",
6083                               Controller, LogicalDriveNumber,
6084                               Controller->ControllerNumber,
6085                               LogicalDriveNumber);
6086           break;
6087         case DAC960_V1_InvalidOrNonredundantLogicalDrive:
6088           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6089                               "(/dev/rd/c%dd%d) Failed - "
6090                               "Invalid or Nonredundant Logical Drive\n",
6091                               Controller, LogicalDriveNumber,
6092                               Controller->ControllerNumber,
6093                               LogicalDriveNumber);
6094           break;
6095         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6096           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6097                               "(/dev/rd/c%dd%d) Failed - Rebuild or "
6098                               "Consistency Check Already in Progress\n",
6099                               Controller, LogicalDriveNumber,
6100                               Controller->ControllerNumber,
6101                               LogicalDriveNumber);
6102           break;
6103         default:
6104           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6105                               "(/dev/rd/c%dd%d) Failed - "
6106                               "Unexpected Status %04X\n",
6107                               Controller, LogicalDriveNumber,
6108                               Controller->ControllerNumber,
6109                               LogicalDriveNumber, Command->V1.CommandStatus);
6110           break;
6111         }
6112     }
6113   else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
6114            strcmp(UserCommand, "cancel-consistency-check") == 0)
6115     {
6116       /*
6117         the OldRebuildRateConstant is never actually used
6118         once its value is retrieved from the controller.
6119        */
6120       unsigned char *OldRebuildRateConstant;
6121       dma_addr_t OldRebuildRateConstantDMA;
6122
6123       OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
6124                 sizeof(char), &OldRebuildRateConstantDMA);
6125       if (OldRebuildRateConstant == NULL) {
6126          DAC960_UserCritical("Cancellation of Rebuild or "
6127                              "Consistency Check Failed - "
6128                              "Out of Memory",
6129                              Controller);
6130          goto failure;
6131       }
6132       CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
6133       CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
6134       CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
6135       DAC960_ExecuteCommand(Command);
6136       switch (Command->V1.CommandStatus)
6137         {
6138         case DAC960_V1_NormalCompletion:
6139           DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
6140                               Controller);
6141           break;
6142         default:
6143           DAC960_UserCritical("Cancellation of Rebuild or "
6144                               "Consistency Check Failed - "
6145                               "Unexpected Status %04X\n",
6146                               Controller, Command->V1.CommandStatus);
6147           break;
6148         }
6149 failure:
6150         pci_free_consistent(Controller->PCIDevice, sizeof(char),
6151                 OldRebuildRateConstant, OldRebuildRateConstantDMA);
6152     }
6153   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6154                            Controller, UserCommand);
6155
6156   spin_lock_irqsave(&Controller->queue_lock, flags);
6157   DAC960_DeallocateCommand(Command);
6158   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6159   return true;
6160 }
6161
6162
6163 /*
6164   DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
6165   TargetID into a Logical Device.  It returns true on success and false
6166   on failure.
6167 */
6168
6169 static boolean DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
6170                                                  unsigned char Channel,
6171                                                  unsigned char TargetID,
6172                                                  unsigned short
6173                                                    *LogicalDeviceNumber)
6174 {
6175   DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
6176   DAC960_Controller_T *Controller =  Command->Controller;
6177
6178   CommandMailbox = &Command->V2.CommandMailbox;
6179   memcpy(&SavedCommandMailbox, CommandMailbox,
6180          sizeof(DAC960_V2_CommandMailbox_T));
6181
6182   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
6183   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6184                                     .DataTransferControllerToHost = true;
6185   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6186                                     .NoAutoRequestSense = true;
6187   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
6188     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
6189   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
6190   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
6191   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
6192     DAC960_V2_TranslatePhysicalToLogicalDevice;
6193   CommandMailbox->Common.DataTransferMemoryAddress
6194                         .ScatterGatherSegments[0]
6195                         .SegmentDataPointer =
6196                 Controller->V2.PhysicalToLogicalDeviceDMA;
6197   CommandMailbox->Common.DataTransferMemoryAddress
6198                         .ScatterGatherSegments[0]
6199                         .SegmentByteCount =
6200                 CommandMailbox->Common.DataTransferSize;
6201
6202   DAC960_ExecuteCommand(Command);
6203   *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
6204
6205   memcpy(CommandMailbox, &SavedCommandMailbox,
6206          sizeof(DAC960_V2_CommandMailbox_T));
6207   return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
6208 }
6209
6210
6211 /*
6212   DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
6213   Controllers.
6214 */
6215
6216 static boolean DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
6217                                             unsigned char *UserCommand)
6218 {
6219   DAC960_Command_T *Command;
6220   DAC960_V2_CommandMailbox_T *CommandMailbox;
6221   unsigned long flags;
6222   unsigned char Channel, TargetID, LogicalDriveNumber;
6223   unsigned short LogicalDeviceNumber;
6224
6225   spin_lock_irqsave(&Controller->queue_lock, flags);
6226   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6227     DAC960_WaitForCommand(Controller);
6228   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6229   Controller->UserStatusLength = 0;
6230   DAC960_V2_ClearCommand(Command);
6231   Command->CommandType = DAC960_ImmediateCommand;
6232   CommandMailbox = &Command->V2.CommandMailbox;
6233   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
6234   CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
6235   CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
6236   if (strcmp(UserCommand, "flush-cache") == 0)
6237     {
6238       CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
6239       CommandMailbox->DeviceOperation.OperationDevice =
6240         DAC960_V2_RAID_Controller;
6241       DAC960_ExecuteCommand(Command);
6242       DAC960_UserCritical("Cache Flush Completed\n", Controller);
6243     }
6244   else if (strncmp(UserCommand, "kill", 4) == 0 &&
6245            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
6246                                       &Channel, &TargetID) &&
6247            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6248                                              &LogicalDeviceNumber))
6249     {
6250       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6251         LogicalDeviceNumber;
6252       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6253         DAC960_V2_SetDeviceState;
6254       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6255         DAC960_V2_Device_Dead;
6256       DAC960_ExecuteCommand(Command);
6257       DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
6258                           Controller, Channel, TargetID,
6259                           (Command->V2.CommandStatus
6260                            == DAC960_V2_NormalCompletion
6261                            ? "Succeeded" : "Failed"));
6262     }
6263   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
6264            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
6265                                       &Channel, &TargetID) &&
6266            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6267                                              &LogicalDeviceNumber))
6268     {
6269       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6270         LogicalDeviceNumber;
6271       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6272         DAC960_V2_SetDeviceState;
6273       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6274         DAC960_V2_Device_Online;
6275       DAC960_ExecuteCommand(Command);
6276       DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
6277                           Controller, Channel, TargetID,
6278                           (Command->V2.CommandStatus
6279                            == DAC960_V2_NormalCompletion
6280                            ? "Succeeded" : "Failed"));
6281     }
6282   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6283            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6284                                       &Channel, &TargetID) &&
6285            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6286                                              &LogicalDeviceNumber))
6287     {
6288       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6289         LogicalDeviceNumber;
6290       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6291         DAC960_V2_SetDeviceState;
6292       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6293         DAC960_V2_Device_Standby;
6294       DAC960_ExecuteCommand(Command);
6295       DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
6296                           Controller, Channel, TargetID,
6297                           (Command->V2.CommandStatus
6298                            == DAC960_V2_NormalCompletion
6299                            ? "Succeeded" : "Failed"));
6300     }
6301   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6302            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6303                                       &Channel, &TargetID) &&
6304            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6305                                              &LogicalDeviceNumber))
6306     {
6307       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6308         LogicalDeviceNumber;
6309       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6310         DAC960_V2_RebuildDeviceStart;
6311       DAC960_ExecuteCommand(Command);
6312       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6313                           Controller, Channel, TargetID,
6314                           (Command->V2.CommandStatus
6315                            == DAC960_V2_NormalCompletion
6316                            ? "Initiated" : "Not Initiated"));
6317     }
6318   else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
6319            DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
6320                                       &Channel, &TargetID) &&
6321            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6322                                              &LogicalDeviceNumber))
6323     {
6324       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6325         LogicalDeviceNumber;
6326       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6327         DAC960_V2_RebuildDeviceStop;
6328       DAC960_ExecuteCommand(Command);
6329       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6330                           Controller, Channel, TargetID,
6331                           (Command->V2.CommandStatus
6332                            == DAC960_V2_NormalCompletion
6333                            ? "Cancelled" : "Not Cancelled"));
6334     }
6335   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6336            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6337                                     &LogicalDriveNumber))
6338     {
6339       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6340         LogicalDriveNumber;
6341       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6342         DAC960_V2_ConsistencyCheckStart;
6343       CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
6344       CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
6345       DAC960_ExecuteCommand(Command);
6346       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6347                           "(/dev/rd/c%dd%d) %s\n",
6348                           Controller, LogicalDriveNumber,
6349                           Controller->ControllerNumber,
6350                           LogicalDriveNumber,
6351                           (Command->V2.CommandStatus
6352                            == DAC960_V2_NormalCompletion
6353                            ? "Initiated" : "Not Initiated"));
6354     }
6355   else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
6356            DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
6357                                     &LogicalDriveNumber))
6358     {
6359       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6360         LogicalDriveNumber;
6361       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6362         DAC960_V2_ConsistencyCheckStop;
6363       DAC960_ExecuteCommand(Command);
6364       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6365                           "(/dev/rd/c%dd%d) %s\n",
6366                           Controller, LogicalDriveNumber,
6367                           Controller->ControllerNumber,
6368                           LogicalDriveNumber,
6369                           (Command->V2.CommandStatus
6370                            == DAC960_V2_NormalCompletion
6371                            ? "Cancelled" : "Not Cancelled"));
6372     }
6373   else if (strcmp(UserCommand, "perform-discovery") == 0)
6374     {
6375       CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
6376       DAC960_ExecuteCommand(Command);
6377       DAC960_UserCritical("Discovery %s\n", Controller,
6378                           (Command->V2.CommandStatus
6379                            == DAC960_V2_NormalCompletion
6380                            ? "Initiated" : "Not Initiated"));
6381       if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
6382         {
6383           CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
6384           CommandMailbox->ControllerInfo.CommandControlBits
6385                                         .DataTransferControllerToHost = true;
6386           CommandMailbox->ControllerInfo.CommandControlBits
6387                                         .NoAutoRequestSense = true;
6388           CommandMailbox->ControllerInfo.DataTransferSize =
6389             sizeof(DAC960_V2_ControllerInfo_T);
6390           CommandMailbox->ControllerInfo.ControllerNumber = 0;
6391           CommandMailbox->ControllerInfo.IOCTL_Opcode =
6392             DAC960_V2_GetControllerInfo;
6393           /*
6394            * How does this NOT race with the queued Monitoring
6395            * usage of this structure?
6396            */
6397           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6398                                         .ScatterGatherSegments[0]
6399                                         .SegmentDataPointer =
6400             Controller->V2.NewControllerInformationDMA;
6401           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6402                                         .ScatterGatherSegments[0]
6403                                         .SegmentByteCount =
6404             CommandMailbox->ControllerInfo.DataTransferSize;
6405           DAC960_ExecuteCommand(Command);
6406           while (Controller->V2.NewControllerInformation->PhysicalScanActive)
6407             {
6408               DAC960_ExecuteCommand(Command);
6409               sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
6410             }
6411           DAC960_UserCritical("Discovery Completed\n", Controller);
6412         }
6413     }
6414   else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
6415     Controller->SuppressEnclosureMessages = true;
6416   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6417                            Controller, UserCommand);
6418
6419   spin_lock_irqsave(&Controller->queue_lock, flags);
6420   DAC960_DeallocateCommand(Command);
6421   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6422   return true;
6423 }
6424
6425
6426 /*
6427   DAC960_ProcReadStatus implements reading /proc/rd/status.
6428 */
6429
6430 static int DAC960_ProcReadStatus(char *Page, char **Start, off_t Offset,
6431                                  int Count, int *EOF, void *Data)
6432 {
6433   unsigned char *StatusMessage = "OK\n";
6434   int ControllerNumber, BytesAvailable;
6435   for (ControllerNumber = 0;
6436        ControllerNumber < DAC960_ControllerCount;
6437        ControllerNumber++)
6438     {
6439       DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
6440       if (Controller == NULL) continue;
6441       if (Controller->MonitoringAlertMode)
6442         {
6443           StatusMessage = "ALERT\n";
6444           break;
6445         }
6446     }
6447   BytesAvailable = strlen(StatusMessage) - Offset;
6448   if (Count >= BytesAvailable)
6449     {
6450       Count = BytesAvailable;
6451       *EOF = true;
6452     }
6453   if (Count <= 0) return 0;
6454   *Start = Page;
6455   memcpy(Page, &StatusMessage[Offset], Count);
6456   return Count;
6457 }
6458
6459
6460 /*
6461   DAC960_ProcReadInitialStatus implements reading /proc/rd/cN/initial_status.
6462 */
6463
6464 static int DAC960_ProcReadInitialStatus(char *Page, char **Start, off_t Offset,
6465                                         int Count, int *EOF, void *Data)
6466 {
6467   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6468   int BytesAvailable = Controller->InitialStatusLength - Offset;
6469   if (Count >= BytesAvailable)
6470     {
6471       Count = BytesAvailable;
6472       *EOF = true;
6473     }
6474   if (Count <= 0) return 0;
6475   *Start = Page;
6476   memcpy(Page, &Controller->CombinedStatusBuffer[Offset], Count);
6477   return Count;
6478 }
6479
6480
6481 /*
6482   DAC960_ProcReadCurrentStatus implements reading /proc/rd/cN/current_status.
6483 */
6484
6485 static int DAC960_ProcReadCurrentStatus(char *Page, char **Start, off_t Offset,
6486                                         int Count, int *EOF, void *Data)
6487 {
6488   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6489   unsigned char *StatusMessage =
6490     "No Rebuild or Consistency Check in Progress\n";
6491   int ProgressMessageLength = strlen(StatusMessage);
6492   int BytesAvailable;
6493   if (jiffies != Controller->LastCurrentStatusTime)
6494     {
6495       Controller->CurrentStatusLength = 0;
6496       DAC960_AnnounceDriver(Controller);
6497       DAC960_ReportControllerConfiguration(Controller);
6498       DAC960_ReportDeviceConfiguration(Controller);
6499       if (Controller->ProgressBufferLength > 0)
6500         ProgressMessageLength = Controller->ProgressBufferLength;
6501       if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
6502         {
6503           unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
6504           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6505           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6506           if (Controller->ProgressBufferLength > 0)
6507             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6508                    Controller->ProgressBuffer);
6509           else
6510             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6511                    StatusMessage);
6512           Controller->CurrentStatusLength += ProgressMessageLength;
6513         }
6514       Controller->LastCurrentStatusTime = jiffies;
6515     }
6516   BytesAvailable = Controller->CurrentStatusLength - Offset;
6517   if (Count >= BytesAvailable)
6518     {
6519       Count = BytesAvailable;
6520       *EOF = true;
6521     }
6522   if (Count <= 0) return 0;
6523   *Start = Page;
6524   memcpy(Page, &Controller->CurrentStatusBuffer[Offset], Count);
6525   return Count;
6526 }
6527
6528
6529 /*
6530   DAC960_ProcReadUserCommand implements reading /proc/rd/cN/user_command.
6531 */
6532
6533 static int DAC960_ProcReadUserCommand(char *Page, char **Start, off_t Offset,
6534                                       int Count, int *EOF, void *Data)
6535 {
6536   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6537   int BytesAvailable = Controller->UserStatusLength - Offset;
6538   if (Count >= BytesAvailable)
6539     {
6540       Count = BytesAvailable;
6541       *EOF = true;
6542     }
6543   if (Count <= 0) return 0;
6544   *Start = Page;
6545   memcpy(Page, &Controller->UserStatusBuffer[Offset], Count);
6546   return Count;
6547 }
6548
6549
6550 /*
6551   DAC960_ProcWriteUserCommand implements writing /proc/rd/cN/user_command.
6552 */
6553
6554 static int DAC960_ProcWriteUserCommand(struct file *file,
6555                                        const char __user *Buffer,
6556                                        unsigned long Count, void *Data)
6557 {
6558   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6559   unsigned char CommandBuffer[80];
6560   int Length;
6561   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
6562   if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
6563   CommandBuffer[Count] = '\0';
6564   Length = strlen(CommandBuffer);
6565   if (CommandBuffer[Length-1] == '\n')
6566     CommandBuffer[--Length] = '\0';
6567   if (Controller->FirmwareType == DAC960_V1_Controller)
6568     return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
6569             ? Count : -EBUSY);
6570   else
6571     return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
6572             ? Count : -EBUSY);
6573 }
6574
6575
6576 /*
6577   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
6578   DAC960 Driver.
6579 */
6580
6581 static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
6582 {
6583         struct proc_dir_entry *StatusProcEntry;
6584         struct proc_dir_entry *ControllerProcEntry;
6585         struct proc_dir_entry *UserCommandProcEntry;
6586
6587         if (DAC960_ProcDirectoryEntry == NULL) {
6588                 DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
6589                 StatusProcEntry = create_proc_read_entry("status", 0,
6590                                            DAC960_ProcDirectoryEntry,
6591                                            DAC960_ProcReadStatus, NULL);
6592         }
6593
6594       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
6595       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
6596                                        DAC960_ProcDirectoryEntry);
6597       create_proc_read_entry("initial_status", 0, ControllerProcEntry,
6598                              DAC960_ProcReadInitialStatus, Controller);
6599       create_proc_read_entry("current_status", 0, ControllerProcEntry,
6600                              DAC960_ProcReadCurrentStatus, Controller);
6601       UserCommandProcEntry =
6602         create_proc_read_entry("user_command", S_IWUSR | S_IRUSR,
6603                                ControllerProcEntry, DAC960_ProcReadUserCommand,
6604                                Controller);
6605       UserCommandProcEntry->write_proc = DAC960_ProcWriteUserCommand;
6606       Controller->ControllerProcEntry = ControllerProcEntry;
6607 }
6608
6609
6610 /*
6611   DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
6612   DAC960 Driver.
6613 */
6614
6615 static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
6616 {
6617       if (Controller->ControllerProcEntry == NULL)
6618               return;
6619       remove_proc_entry("initial_status", Controller->ControllerProcEntry);
6620       remove_proc_entry("current_status", Controller->ControllerProcEntry);
6621       remove_proc_entry("user_command", Controller->ControllerProcEntry);
6622       remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
6623       Controller->ControllerProcEntry = NULL;
6624 }
6625
6626 #ifdef DAC960_GAM_MINOR
6627
6628 /*
6629  * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
6630 */
6631
6632 static int DAC960_gam_ioctl(struct inode *inode, struct file *file,
6633                             unsigned int Request, unsigned long Argument)
6634 {
6635   int ErrorCode = 0;
6636   if (!capable(CAP_SYS_ADMIN)) return -EACCES;
6637   switch (Request)
6638     {
6639     case DAC960_IOCTL_GET_CONTROLLER_COUNT:
6640       return DAC960_ControllerCount;
6641     case DAC960_IOCTL_GET_CONTROLLER_INFO:
6642       {
6643         DAC960_ControllerInfo_T __user *UserSpaceControllerInfo =
6644           (DAC960_ControllerInfo_T __user *) Argument;
6645         DAC960_ControllerInfo_T ControllerInfo;
6646         DAC960_Controller_T *Controller;
6647         int ControllerNumber;
6648         if (UserSpaceControllerInfo == NULL) return -EINVAL;
6649         ErrorCode = get_user(ControllerNumber,
6650                              &UserSpaceControllerInfo->ControllerNumber);
6651         if (ErrorCode != 0) return ErrorCode;
6652         if (ControllerNumber < 0 ||
6653             ControllerNumber > DAC960_ControllerCount - 1)
6654           return -ENXIO;
6655         Controller = DAC960_Controllers[ControllerNumber];
6656         if (Controller == NULL) return -ENXIO;
6657         memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
6658         ControllerInfo.ControllerNumber = ControllerNumber;
6659         ControllerInfo.FirmwareType = Controller->FirmwareType;
6660         ControllerInfo.Channels = Controller->Channels;
6661         ControllerInfo.Targets = Controller->Targets;
6662         ControllerInfo.PCI_Bus = Controller->Bus;
6663         ControllerInfo.PCI_Device = Controller->Device;
6664         ControllerInfo.PCI_Function = Controller->Function;
6665         ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
6666         ControllerInfo.PCI_Address = Controller->PCI_Address;
6667         strcpy(ControllerInfo.ModelName, Controller->ModelName);
6668         strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
6669         return (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
6670                              sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
6671       }
6672     case DAC960_IOCTL_V1_EXECUTE_COMMAND:
6673       {
6674         DAC960_V1_UserCommand_T __user *UserSpaceUserCommand =
6675           (DAC960_V1_UserCommand_T __user *) Argument;
6676         DAC960_V1_UserCommand_T UserCommand;
6677         DAC960_Controller_T *Controller;
6678         DAC960_Command_T *Command = NULL;
6679         DAC960_V1_CommandOpcode_T CommandOpcode;
6680         DAC960_V1_CommandStatus_T CommandStatus;
6681         DAC960_V1_DCDB_T DCDB;
6682         DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
6683         dma_addr_t      DCDB_IOBUFDMA;
6684         unsigned long flags;
6685         int ControllerNumber, DataTransferLength;
6686         unsigned char *DataTransferBuffer = NULL;
6687         dma_addr_t DataTransferBufferDMA;
6688         if (UserSpaceUserCommand == NULL) return -EINVAL;
6689         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6690                                    sizeof(DAC960_V1_UserCommand_T))) {
6691                 ErrorCode = -EFAULT;
6692                 goto Failure1a;
6693         }
6694         ControllerNumber = UserCommand.ControllerNumber;
6695         if (ControllerNumber < 0 ||
6696             ControllerNumber > DAC960_ControllerCount - 1)
6697           return -ENXIO;
6698         Controller = DAC960_Controllers[ControllerNumber];
6699         if (Controller == NULL) return -ENXIO;
6700         if (Controller->FirmwareType != DAC960_V1_Controller) return -EINVAL;
6701         CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
6702         DataTransferLength = UserCommand.DataTransferLength;
6703         if (CommandOpcode & 0x80) return -EINVAL;
6704         if (CommandOpcode == DAC960_V1_DCDB)
6705           {
6706             if (copy_from_user(&DCDB, UserCommand.DCDB,
6707                                sizeof(DAC960_V1_DCDB_T))) {
6708                 ErrorCode = -EFAULT;
6709                 goto Failure1a;
6710             }
6711             if (DCDB.Channel >= DAC960_V1_MaxChannels) return -EINVAL;
6712             if (!((DataTransferLength == 0 &&
6713                    DCDB.Direction
6714                    == DAC960_V1_DCDB_NoDataTransfer) ||
6715                   (DataTransferLength > 0 &&
6716                    DCDB.Direction
6717                    == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
6718                   (DataTransferLength < 0 &&
6719                    DCDB.Direction
6720                    == DAC960_V1_DCDB_DataTransferSystemToDevice)))
6721               return -EINVAL;
6722             if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
6723                 != abs(DataTransferLength))
6724               return -EINVAL;
6725             DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
6726                         sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
6727             if (DCDB_IOBUF == NULL)
6728                         return -ENOMEM;
6729           }
6730         if (DataTransferLength > 0)
6731           {
6732             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6733                                 DataTransferLength, &DataTransferBufferDMA);
6734             if (DataTransferBuffer == NULL) {
6735                 ErrorCode = -ENOMEM;
6736                 goto Failure1;
6737             }
6738             memset(DataTransferBuffer, 0, DataTransferLength);
6739           }
6740         else if (DataTransferLength < 0)
6741           {
6742             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6743                                 -DataTransferLength, &DataTransferBufferDMA);
6744             if (DataTransferBuffer == NULL) {
6745                 ErrorCode = -ENOMEM;
6746                 goto Failure1;
6747             }
6748             if (copy_from_user(DataTransferBuffer,
6749                                UserCommand.DataTransferBuffer,
6750                                -DataTransferLength)) {
6751                 ErrorCode = -EFAULT;
6752                 goto Failure1;
6753             }
6754           }
6755         if (CommandOpcode == DAC960_V1_DCDB)
6756           {
6757             spin_lock_irqsave(&Controller->queue_lock, flags);
6758             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6759               DAC960_WaitForCommand(Controller);
6760             while (Controller->V1.DirectCommandActive[DCDB.Channel]
6761                                                      [DCDB.TargetID])
6762               {
6763                 spin_unlock_irq(&Controller->queue_lock);
6764                 __wait_event(Controller->CommandWaitQueue,
6765                              !Controller->V1.DirectCommandActive
6766                                              [DCDB.Channel][DCDB.TargetID]);
6767                 spin_lock_irq(&Controller->queue_lock);
6768               }
6769             Controller->V1.DirectCommandActive[DCDB.Channel]
6770                                               [DCDB.TargetID] = true;
6771             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6772             DAC960_V1_ClearCommand(Command);
6773             Command->CommandType = DAC960_ImmediateCommand;
6774             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6775                    sizeof(DAC960_V1_CommandMailbox_T));
6776             Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
6777             DCDB.BusAddress = DataTransferBufferDMA;
6778             memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
6779           }
6780         else
6781           {
6782             spin_lock_irqsave(&Controller->queue_lock, flags);
6783             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6784               DAC960_WaitForCommand(Controller);
6785             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6786             DAC960_V1_ClearCommand(Command);
6787             Command->CommandType = DAC960_ImmediateCommand;
6788             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6789                    sizeof(DAC960_V1_CommandMailbox_T));
6790             if (DataTransferBuffer != NULL)
6791               Command->V1.CommandMailbox.Type3.BusAddress =
6792                 DataTransferBufferDMA;
6793           }
6794         DAC960_ExecuteCommand(Command);
6795         CommandStatus = Command->V1.CommandStatus;
6796         spin_lock_irqsave(&Controller->queue_lock, flags);
6797         DAC960_DeallocateCommand(Command);
6798         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6799         if (DataTransferLength > 0)
6800           {
6801             if (copy_to_user(UserCommand.DataTransferBuffer,
6802                              DataTransferBuffer, DataTransferLength)) {
6803                 ErrorCode = -EFAULT;
6804                 goto Failure1;
6805             }
6806           }
6807         if (CommandOpcode == DAC960_V1_DCDB)
6808           {
6809             /*
6810               I don't believe Target or Channel in the DCDB_IOBUF
6811               should be any different from the contents of DCDB.
6812              */
6813             Controller->V1.DirectCommandActive[DCDB.Channel]
6814                                               [DCDB.TargetID] = false;
6815             if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
6816                              sizeof(DAC960_V1_DCDB_T))) {
6817                 ErrorCode = -EFAULT;
6818                 goto Failure1;
6819             }
6820           }
6821         ErrorCode = CommandStatus;
6822       Failure1:
6823         if (DataTransferBuffer != NULL)
6824           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6825                         DataTransferBuffer, DataTransferBufferDMA);
6826         if (DCDB_IOBUF != NULL)
6827           pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
6828                         DCDB_IOBUF, DCDB_IOBUFDMA);
6829       Failure1a:
6830         return ErrorCode;
6831       }
6832     case DAC960_IOCTL_V2_EXECUTE_COMMAND:
6833       {
6834         DAC960_V2_UserCommand_T __user *UserSpaceUserCommand =
6835           (DAC960_V2_UserCommand_T __user *) Argument;
6836         DAC960_V2_UserCommand_T UserCommand;
6837         DAC960_Controller_T *Controller;
6838         DAC960_Command_T *Command = NULL;
6839         DAC960_V2_CommandMailbox_T *CommandMailbox;
6840         DAC960_V2_CommandStatus_T CommandStatus;
6841         unsigned long flags;
6842         int ControllerNumber, DataTransferLength;
6843         int DataTransferResidue, RequestSenseLength;
6844         unsigned char *DataTransferBuffer = NULL;
6845         dma_addr_t DataTransferBufferDMA;
6846         unsigned char *RequestSenseBuffer = NULL;
6847         dma_addr_t RequestSenseBufferDMA;
6848         if (UserSpaceUserCommand == NULL) return -EINVAL;
6849         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6850                            sizeof(DAC960_V2_UserCommand_T))) {
6851                 ErrorCode = -EFAULT;
6852                 goto Failure2a;
6853         }
6854         ControllerNumber = UserCommand.ControllerNumber;
6855         if (ControllerNumber < 0 ||
6856             ControllerNumber > DAC960_ControllerCount - 1)
6857           return -ENXIO;
6858         Controller = DAC960_Controllers[ControllerNumber];
6859         if (Controller == NULL) return -ENXIO;
6860         if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL;
6861         DataTransferLength = UserCommand.DataTransferLength;
6862         if (DataTransferLength > 0)
6863           {
6864             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6865                                 DataTransferLength, &DataTransferBufferDMA);
6866             if (DataTransferBuffer == NULL) return -ENOMEM;
6867             memset(DataTransferBuffer, 0, DataTransferLength);
6868           }
6869         else if (DataTransferLength < 0)
6870           {
6871             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6872                                 -DataTransferLength, &DataTransferBufferDMA);
6873             if (DataTransferBuffer == NULL) return -ENOMEM;
6874             if (copy_from_user(DataTransferBuffer,
6875                                UserCommand.DataTransferBuffer,
6876                                -DataTransferLength)) {
6877                 ErrorCode = -EFAULT;
6878                 goto Failure2;
6879             }
6880           }
6881         RequestSenseLength = UserCommand.RequestSenseLength;
6882         if (RequestSenseLength > 0)
6883           {
6884             RequestSenseBuffer = pci_alloc_consistent(Controller->PCIDevice,
6885                         RequestSenseLength, &RequestSenseBufferDMA);
6886             if (RequestSenseBuffer == NULL)
6887               {
6888                 ErrorCode = -ENOMEM;
6889                 goto Failure2;
6890               }
6891             memset(RequestSenseBuffer, 0, RequestSenseLength);
6892           }
6893         spin_lock_irqsave(&Controller->queue_lock, flags);
6894         while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6895           DAC960_WaitForCommand(Controller);
6896         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6897         DAC960_V2_ClearCommand(Command);
6898         Command->CommandType = DAC960_ImmediateCommand;
6899         CommandMailbox = &Command->V2.CommandMailbox;
6900         memcpy(CommandMailbox, &UserCommand.CommandMailbox,
6901                sizeof(DAC960_V2_CommandMailbox_T));
6902         CommandMailbox->Common.CommandControlBits
6903                               .AdditionalScatterGatherListMemory = false;
6904         CommandMailbox->Common.CommandControlBits
6905                               .NoAutoRequestSense = true;
6906         CommandMailbox->Common.DataTransferSize = 0;
6907         CommandMailbox->Common.DataTransferPageNumber = 0;
6908         memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
6909                sizeof(DAC960_V2_DataTransferMemoryAddress_T));
6910         if (DataTransferLength != 0)
6911           {
6912             if (DataTransferLength > 0)
6913               {
6914                 CommandMailbox->Common.CommandControlBits
6915                                       .DataTransferControllerToHost = true;
6916                 CommandMailbox->Common.DataTransferSize = DataTransferLength;
6917               }
6918             else
6919               {
6920                 CommandMailbox->Common.CommandControlBits
6921                                       .DataTransferControllerToHost = false;
6922                 CommandMailbox->Common.DataTransferSize = -DataTransferLength;
6923               }
6924             CommandMailbox->Common.DataTransferMemoryAddress
6925                                   .ScatterGatherSegments[0]
6926                                   .SegmentDataPointer = DataTransferBufferDMA;
6927             CommandMailbox->Common.DataTransferMemoryAddress
6928                                   .ScatterGatherSegments[0]
6929                                   .SegmentByteCount =
6930               CommandMailbox->Common.DataTransferSize;
6931           }
6932         if (RequestSenseLength > 0)
6933           {
6934             CommandMailbox->Common.CommandControlBits
6935                                   .NoAutoRequestSense = false;
6936             CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
6937             CommandMailbox->Common.RequestSenseBusAddress =
6938                                                         RequestSenseBufferDMA;
6939           }
6940         DAC960_ExecuteCommand(Command);
6941         CommandStatus = Command->V2.CommandStatus;
6942         RequestSenseLength = Command->V2.RequestSenseLength;
6943         DataTransferResidue = Command->V2.DataTransferResidue;
6944         spin_lock_irqsave(&Controller->queue_lock, flags);
6945         DAC960_DeallocateCommand(Command);
6946         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6947         if (RequestSenseLength > UserCommand.RequestSenseLength)
6948           RequestSenseLength = UserCommand.RequestSenseLength;
6949         if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
6950                                  &DataTransferResidue,
6951                                  sizeof(DataTransferResidue))) {
6952                 ErrorCode = -EFAULT;
6953                 goto Failure2;
6954         }
6955         if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
6956                          &RequestSenseLength, sizeof(RequestSenseLength))) {
6957                 ErrorCode = -EFAULT;
6958                 goto Failure2;
6959         }
6960         if (DataTransferLength > 0)
6961           {
6962             if (copy_to_user(UserCommand.DataTransferBuffer,
6963                              DataTransferBuffer, DataTransferLength)) {
6964                 ErrorCode = -EFAULT;
6965                 goto Failure2;
6966             }
6967           }
6968         if (RequestSenseLength > 0)
6969           {
6970             if (copy_to_user(UserCommand.RequestSenseBuffer,
6971                              RequestSenseBuffer, RequestSenseLength)) {
6972                 ErrorCode = -EFAULT;
6973                 goto Failure2;
6974             }
6975           }
6976         ErrorCode = CommandStatus;
6977       Failure2:
6978           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6979                 DataTransferBuffer, DataTransferBufferDMA);
6980         if (RequestSenseBuffer != NULL)
6981           pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
6982                 RequestSenseBuffer, RequestSenseBufferDMA);
6983       Failure2a:
6984         return ErrorCode;
6985       }
6986     case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
6987       {
6988         DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus =
6989           (DAC960_V2_GetHealthStatus_T __user *) Argument;
6990         DAC960_V2_GetHealthStatus_T GetHealthStatus;
6991         DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
6992         DAC960_Controller_T *Controller;
6993         int ControllerNumber;
6994         if (UserSpaceGetHealthStatus == NULL) return -EINVAL;
6995         if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
6996                            sizeof(DAC960_V2_GetHealthStatus_T)))
6997                 return -EFAULT;
6998         ControllerNumber = GetHealthStatus.ControllerNumber;
6999         if (ControllerNumber < 0 ||
7000             ControllerNumber > DAC960_ControllerCount - 1)
7001           return -ENXIO;
7002         Controller = DAC960_Controllers[ControllerNumber];
7003         if (Controller == NULL) return -ENXIO;
7004         if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL;
7005         if (copy_from_user(&HealthStatusBuffer,
7006                            GetHealthStatus.HealthStatusBuffer,
7007                            sizeof(DAC960_V2_HealthStatusBuffer_T)))
7008                 return -EFAULT;
7009         while (Controller->V2.HealthStatusBuffer->StatusChangeCounter
7010                == HealthStatusBuffer.StatusChangeCounter &&
7011                Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
7012                == HealthStatusBuffer.NextEventSequenceNumber)
7013           {
7014             interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue,
7015                                            DAC960_MonitoringTimerInterval);
7016             if (signal_pending(current)) return -EINTR;
7017           }
7018         if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
7019                          Controller->V2.HealthStatusBuffer,
7020                          sizeof(DAC960_V2_HealthStatusBuffer_T)))
7021                 return -EFAULT;
7022         return 0;
7023       }
7024     }
7025   return -EINVAL;
7026 }
7027
7028 static struct file_operations DAC960_gam_fops = {
7029         .owner          = THIS_MODULE,
7030         .ioctl          = DAC960_gam_ioctl
7031 };
7032
7033 static struct miscdevice DAC960_gam_dev = {
7034         DAC960_GAM_MINOR,
7035         "dac960_gam",
7036         &DAC960_gam_fops
7037 };
7038
7039 static int DAC960_gam_init(void)
7040 {
7041         int ret;
7042
7043         ret = misc_register(&DAC960_gam_dev);
7044         if (ret)
7045                 printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
7046         return ret;
7047 }
7048
7049 static void DAC960_gam_cleanup(void)
7050 {
7051         misc_deregister(&DAC960_gam_dev);
7052 }
7053
7054 #endif /* DAC960_GAM_MINOR */
7055
7056 static struct DAC960_privdata DAC960_GEM_privdata = {
7057         .HardwareType =         DAC960_GEM_Controller,
7058         .FirmwareType   =       DAC960_V2_Controller,
7059         .InterruptHandler =     DAC960_GEM_InterruptHandler,
7060         .MemoryWindowSize =     DAC960_GEM_RegisterWindowSize,
7061 };
7062
7063
7064 static struct DAC960_privdata DAC960_BA_privdata = {
7065         .HardwareType =         DAC960_BA_Controller,
7066         .FirmwareType   =       DAC960_V2_Controller,
7067         .InterruptHandler =     DAC960_BA_InterruptHandler,
7068         .MemoryWindowSize =     DAC960_BA_RegisterWindowSize,
7069 };
7070
7071 static struct DAC960_privdata DAC960_LP_privdata = {
7072         .HardwareType =         DAC960_LP_Controller,
7073         .FirmwareType   =       DAC960_LP_Controller,
7074         .InterruptHandler =     DAC960_LP_InterruptHandler,
7075         .MemoryWindowSize =     DAC960_LP_RegisterWindowSize,
7076 };
7077
7078 static struct DAC960_privdata DAC960_LA_privdata = {
7079         .HardwareType =         DAC960_LA_Controller,
7080         .FirmwareType   =       DAC960_V1_Controller,
7081         .InterruptHandler =     DAC960_LA_InterruptHandler,
7082         .MemoryWindowSize =     DAC960_LA_RegisterWindowSize,
7083 };
7084
7085 static struct DAC960_privdata DAC960_PG_privdata = {
7086         .HardwareType =         DAC960_PG_Controller,
7087         .FirmwareType   =       DAC960_V1_Controller,
7088         .InterruptHandler =     DAC960_PG_InterruptHandler,
7089         .MemoryWindowSize =     DAC960_PG_RegisterWindowSize,
7090 };
7091
7092 static struct DAC960_privdata DAC960_PD_privdata = {
7093         .HardwareType =         DAC960_PD_Controller,
7094         .FirmwareType   =       DAC960_V1_Controller,
7095         .InterruptHandler =     DAC960_PD_InterruptHandler,
7096         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7097 };
7098
7099 static struct DAC960_privdata DAC960_P_privdata = {
7100         .HardwareType =         DAC960_P_Controller,
7101         .FirmwareType   =       DAC960_V1_Controller,
7102         .InterruptHandler =     DAC960_P_InterruptHandler,
7103         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7104 };
7105
7106 static struct pci_device_id DAC960_id_table[] = {
7107         {
7108                 .vendor         = PCI_VENDOR_ID_MYLEX,
7109                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
7110                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7111                 .subdevice      = PCI_ANY_ID,
7112                 .driver_data    = (unsigned long) &DAC960_GEM_privdata,
7113         },
7114         {
7115                 .vendor         = PCI_VENDOR_ID_MYLEX,
7116                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_BA,
7117                 .subvendor      = PCI_ANY_ID,
7118                 .subdevice      = PCI_ANY_ID,
7119                 .driver_data    = (unsigned long) &DAC960_BA_privdata,
7120         },
7121         {
7122                 .vendor         = PCI_VENDOR_ID_MYLEX,
7123                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_LP,
7124                 .subvendor      = PCI_ANY_ID,
7125                 .subdevice      = PCI_ANY_ID,
7126                 .driver_data    = (unsigned long) &DAC960_LP_privdata,
7127         },
7128         {
7129                 .vendor         = PCI_VENDOR_ID_DEC,
7130                 .device         = PCI_DEVICE_ID_DEC_21285,
7131                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7132                 .subdevice      = PCI_DEVICE_ID_MYLEX_DAC960_LA,
7133                 .driver_data    = (unsigned long) &DAC960_LA_privdata,
7134         },
7135         {
7136                 .vendor         = PCI_VENDOR_ID_MYLEX,
7137                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PG,
7138                 .subvendor      = PCI_ANY_ID,
7139                 .subdevice      = PCI_ANY_ID,
7140                 .driver_data    = (unsigned long) &DAC960_PG_privdata,
7141         },
7142         {
7143                 .vendor         = PCI_VENDOR_ID_MYLEX,
7144                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PD,
7145                 .subvendor      = PCI_ANY_ID,
7146                 .subdevice      = PCI_ANY_ID,
7147                 .driver_data    = (unsigned long) &DAC960_PD_privdata,
7148         },
7149         {
7150                 .vendor         = PCI_VENDOR_ID_MYLEX,
7151                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_P,
7152                 .subvendor      = PCI_ANY_ID,
7153                 .subdevice      = PCI_ANY_ID,
7154                 .driver_data    = (unsigned long) &DAC960_P_privdata,
7155         },
7156         {0, },
7157 };
7158
7159 MODULE_DEVICE_TABLE(pci, DAC960_id_table);
7160
7161 static struct pci_driver DAC960_pci_driver = {
7162         .name           = "DAC960",
7163         .id_table       = DAC960_id_table,
7164         .probe          = DAC960_Probe,
7165         .remove         = DAC960_Remove,
7166 };
7167
7168 static int DAC960_init_module(void)
7169 {
7170         int ret;
7171
7172         ret =  pci_register_driver(&DAC960_pci_driver);
7173 #ifdef DAC960_GAM_MINOR
7174         if (!ret)
7175                 DAC960_gam_init();
7176 #endif
7177         return ret;
7178 }
7179
7180 static void DAC960_cleanup_module(void)
7181 {
7182         int i;
7183
7184 #ifdef DAC960_GAM_MINOR
7185         DAC960_gam_cleanup();
7186 #endif
7187
7188         for (i = 0; i < DAC960_ControllerCount; i++) {
7189                 DAC960_Controller_T *Controller = DAC960_Controllers[i];
7190                 if (Controller == NULL)
7191                         continue;
7192                 DAC960_FinalizeController(Controller);
7193         }
7194         if (DAC960_ProcDirectoryEntry != NULL) {
7195                 remove_proc_entry("rd/status", NULL);
7196                 remove_proc_entry("rd", NULL);
7197         }
7198         DAC960_ControllerCount = 0;
7199         pci_unregister_driver(&DAC960_pci_driver);
7200 }
7201
7202 module_init(DAC960_init_module);
7203 module_exit(DAC960_cleanup_module);
7204
7205 MODULE_LICENSE("GPL");