Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
[linux-2.6] / drivers / net / irda / smsc-ircc2.c
1 /*********************************************************************
2  * $Id: smsc-ircc2.c,v 1.19.2.5 2002/10/27 11:34:26 dip Exp $
3  *
4  * Description:   Driver for the SMC Infrared Communications Controller
5  * Status:        Experimental.
6  * Author:        Daniele Peri (peri@csai.unipa.it)
7  * Created at:
8  * Modified at:
9  * Modified by:
10  *
11  *     Copyright (c) 2002      Daniele Peri
12  *     All Rights Reserved.
13  *     Copyright (c) 2002      Jean Tourrilhes
14  *     Copyright (c) 2006      Linus Walleij
15  *
16  *
17  * Based on smc-ircc.c:
18  *
19  *     Copyright (c) 2001      Stefani Seibold
20  *     Copyright (c) 1999-2001 Dag Brattli
21  *     Copyright (c) 1998-1999 Thomas Davis,
22  *
23  *      and irport.c:
24  *
25  *     Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
26  *
27  *
28  *     This program is free software; you can redistribute it and/or
29  *     modify it under the terms of the GNU General Public License as
30  *     published by the Free Software Foundation; either version 2 of
31  *     the License, or (at your option) any later version.
32  *
33  *     This program is distributed in the hope that it will be useful,
34  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
35  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
36  *     GNU General Public License for more details.
37  *
38  *     You should have received a copy of the GNU General Public License
39  *     along with this program; if not, write to the Free Software
40  *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
41  *     MA 02111-1307 USA
42  *
43  ********************************************************************/
44
45 #include <linux/module.h>
46 #include <linux/kernel.h>
47 #include <linux/types.h>
48 #include <linux/skbuff.h>
49 #include <linux/netdevice.h>
50 #include <linux/ioport.h>
51 #include <linux/delay.h>
52 #include <linux/slab.h>
53 #include <linux/init.h>
54 #include <linux/rtnetlink.h>
55 #include <linux/serial_reg.h>
56 #include <linux/dma-mapping.h>
57 #include <linux/pnp.h>
58 #include <linux/platform_device.h>
59
60 #include <asm/io.h>
61 #include <asm/dma.h>
62 #include <asm/byteorder.h>
63
64 #include <linux/spinlock.h>
65 #include <linux/pm.h>
66 #ifdef CONFIG_PCI
67 #include <linux/pci.h>
68 #endif
69
70 #include <net/irda/wrapper.h>
71 #include <net/irda/irda.h>
72 #include <net/irda/irda_device.h>
73
74 #include "smsc-ircc2.h"
75 #include "smsc-sio.h"
76
77
78 MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
79 MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
80 MODULE_LICENSE("GPL");
81
82 static int ircc_dma = 255;
83 module_param(ircc_dma, int, 0);
84 MODULE_PARM_DESC(ircc_dma, "DMA channel");
85
86 static int ircc_irq = 255;
87 module_param(ircc_irq, int, 0);
88 MODULE_PARM_DESC(ircc_irq, "IRQ line");
89
90 static int ircc_fir;
91 module_param(ircc_fir, int, 0);
92 MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
93
94 static int ircc_sir;
95 module_param(ircc_sir, int, 0);
96 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
97
98 static int ircc_cfg;
99 module_param(ircc_cfg, int, 0);
100 MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
101
102 static int ircc_transceiver;
103 module_param(ircc_transceiver, int, 0);
104 MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
105
106 /* Types */
107
108 #ifdef CONFIG_PCI
109 struct smsc_ircc_subsystem_configuration {
110         unsigned short vendor; /* PCI vendor ID */
111         unsigned short device; /* PCI vendor ID */
112         unsigned short subvendor; /* PCI subsystem vendor ID */
113         unsigned short subdevice; /* PCI sybsystem device ID */
114         unsigned short sir_io; /* I/O port for SIR */
115         unsigned short fir_io; /* I/O port for FIR */
116         unsigned char  fir_irq; /* FIR IRQ */
117         unsigned char  fir_dma; /* FIR DMA */
118         unsigned short cfg_base; /* I/O port for chip configuration */
119         int (*preconfigure)(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); /* Preconfig function */
120         const char *name;       /* name shown as info */
121 };
122 #endif
123
124 struct smsc_transceiver {
125         char *name;
126         void (*set_for_speed)(int fir_base, u32 speed);
127         int  (*probe)(int fir_base);
128 };
129
130 struct smsc_chip {
131         char *name;
132         #if 0
133         u8      type;
134         #endif
135         u16 flags;
136         u8 devid;
137         u8 rev;
138 };
139
140 struct smsc_chip_address {
141         unsigned int cfg_base;
142         unsigned int type;
143 };
144
145 /* Private data for each instance */
146 struct smsc_ircc_cb {
147         struct net_device *netdev;     /* Yes! we are some kind of netdevice */
148         struct net_device_stats stats;
149         struct irlap_cb    *irlap; /* The link layer we are binded to */
150
151         chipio_t io;               /* IrDA controller information */
152         iobuff_t tx_buff;          /* Transmit buffer */
153         iobuff_t rx_buff;          /* Receive buffer */
154         dma_addr_t tx_buff_dma;
155         dma_addr_t rx_buff_dma;
156
157         struct qos_info qos;       /* QoS capabilities for this device */
158
159         spinlock_t lock;           /* For serializing operations */
160
161         __u32 new_speed;
162         __u32 flags;               /* Interface flags */
163
164         int tx_buff_offsets[10];   /* Offsets between frames in tx_buff */
165         int tx_len;                /* Number of frames in tx_buff */
166
167         int transceiver;
168         struct platform_device *pldev;
169 };
170
171 /* Constants */
172
173 #define SMSC_IRCC2_DRIVER_NAME                  "smsc-ircc2"
174
175 #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED        9600
176 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER        1
177 #define SMSC_IRCC2_C_NET_TIMEOUT                0
178 #define SMSC_IRCC2_C_SIR_STOP                   0
179
180 static const char *driver_name = SMSC_IRCC2_DRIVER_NAME;
181
182 /* Prototypes */
183
184 static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq);
185 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base);
186 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq);
187 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self);
188 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self);
189 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self);
190 static int  smsc_ircc_dma_receive(struct smsc_ircc_cb *self);
191 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self);
192 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
193 static int  smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
194 static int  smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
195 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs);
196 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self);
197 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed);
198 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed);
199 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id);
200 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev);
201 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self);
202 #if SMSC_IRCC2_C_SIR_STOP
203 static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self);
204 #endif
205 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self);
206 static int  smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
207 static int  smsc_ircc_net_open(struct net_device *dev);
208 static int  smsc_ircc_net_close(struct net_device *dev);
209 static int  smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
210 #if SMSC_IRCC2_C_NET_TIMEOUT
211 static void smsc_ircc_timeout(struct net_device *dev);
212 #endif
213 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev);
214 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self);
215 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self);
216 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed);
217 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
218
219 /* Probing */
220 static int __init smsc_ircc_look_for_chips(void);
221 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
222 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
223 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
224 static int __init smsc_superio_fdc(unsigned short cfg_base);
225 static int __init smsc_superio_lpc(unsigned short cfg_base);
226 #ifdef CONFIG_PCI
227 static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
228 static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
229 static void __init preconfigure_ali_port(struct pci_dev *dev,
230                                          unsigned short port);
231 static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
232 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
233                                                     unsigned short ircc_fir,
234                                                     unsigned short ircc_sir,
235                                                     unsigned char ircc_dma,
236                                                     unsigned char ircc_irq);
237 #endif
238
239 /* Transceivers specific functions */
240
241 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed);
242 static int  smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base);
243 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed);
244 static int  smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base);
245 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed);
246 static int  smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base);
247
248 /* Power Management */
249
250 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
251 static int smsc_ircc_resume(struct platform_device *dev);
252
253 static struct platform_driver smsc_ircc_driver = {
254         .suspend        = smsc_ircc_suspend,
255         .resume         = smsc_ircc_resume,
256         .driver         = {
257                 .name   = SMSC_IRCC2_DRIVER_NAME,
258         },
259 };
260
261 /* Transceivers for SMSC-ircc */
262
263 static struct smsc_transceiver smsc_transceivers[] =
264 {
265         { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 },
266         { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select },
267         { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc },
268         { NULL, NULL }
269 };
270 #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1)
271
272 /*  SMC SuperIO chipsets definitions */
273
274 #define KEY55_1 0       /* SuperIO Configuration mode with Key <0x55> */
275 #define KEY55_2 1       /* SuperIO Configuration mode with Key <0x55,0x55> */
276 #define NoIRDA  2       /* SuperIO Chip has no IRDA Port */
277 #define SIR     0       /* SuperIO Chip has only slow IRDA */
278 #define FIR     4       /* SuperIO Chip has fast IRDA */
279 #define SERx4   8       /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
280
281 static struct smsc_chip __initdata fdc_chips_flat[] =
282 {
283         /* Base address 0x3f0 or 0x370 */
284         { "37C44",      KEY55_1|NoIRDA,         0x00, 0x00 }, /* This chip cannot be detected */
285         { "37C665GT",   KEY55_2|NoIRDA,         0x65, 0x01 },
286         { "37C665GT",   KEY55_2|NoIRDA,         0x66, 0x01 },
287         { "37C669",     KEY55_2|SIR|SERx4,      0x03, 0x02 },
288         { "37C669",     KEY55_2|SIR|SERx4,      0x04, 0x02 }, /* ID? */
289         { "37C78",      KEY55_2|NoIRDA,         0x78, 0x00 },
290         { "37N769",     KEY55_1|FIR|SERx4,      0x28, 0x00 },
291         { "37N869",     KEY55_1|FIR|SERx4,      0x29, 0x00 },
292         { NULL }
293 };
294
295 static struct smsc_chip __initdata fdc_chips_paged[] =
296 {
297         /* Base address 0x3f0 or 0x370 */
298         { "37B72X",     KEY55_1|SIR|SERx4,      0x4c, 0x00 },
299         { "37B77X",     KEY55_1|SIR|SERx4,      0x43, 0x00 },
300         { "37B78X",     KEY55_1|SIR|SERx4,      0x44, 0x00 },
301         { "37B80X",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
302         { "37C67X",     KEY55_1|FIR|SERx4,      0x40, 0x00 },
303         { "37C93X",     KEY55_2|SIR|SERx4,      0x02, 0x01 },
304         { "37C93XAPM",  KEY55_1|SIR|SERx4,      0x30, 0x01 },
305         { "37C93XFR",   KEY55_2|FIR|SERx4,      0x03, 0x01 },
306         { "37M707",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
307         { "37M81X",     KEY55_1|SIR|SERx4,      0x4d, 0x00 },
308         { "37N958FR",   KEY55_1|FIR|SERx4,      0x09, 0x04 },
309         { "37N971",     KEY55_1|FIR|SERx4,      0x0a, 0x00 },
310         { "37N972",     KEY55_1|FIR|SERx4,      0x0b, 0x00 },
311         { NULL }
312 };
313
314 static struct smsc_chip __initdata lpc_chips_flat[] =
315 {
316         /* Base address 0x2E or 0x4E */
317         { "47N227",     KEY55_1|FIR|SERx4,      0x5a, 0x00 },
318         { "47N267",     KEY55_1|FIR|SERx4,      0x5e, 0x00 },
319         { NULL }
320 };
321
322 static struct smsc_chip __initdata lpc_chips_paged[] =
323 {
324         /* Base address 0x2E or 0x4E */
325         { "47B27X",     KEY55_1|SIR|SERx4,      0x51, 0x00 },
326         { "47B37X",     KEY55_1|SIR|SERx4,      0x52, 0x00 },
327         { "47M10X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
328         { "47M120",     KEY55_1|NoIRDA|SERx4,   0x5c, 0x00 },
329         { "47M13X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
330         { "47M14X",     KEY55_1|SIR|SERx4,      0x5f, 0x00 },
331         { "47N252",     KEY55_1|FIR|SERx4,      0x0e, 0x00 },
332         { "47S42X",     KEY55_1|SIR|SERx4,      0x57, 0x00 },
333         { NULL }
334 };
335
336 #define SMSCSIO_TYPE_FDC        1
337 #define SMSCSIO_TYPE_LPC        2
338 #define SMSCSIO_TYPE_FLAT       4
339 #define SMSCSIO_TYPE_PAGED      8
340
341 static struct smsc_chip_address __initdata possible_addresses[] =
342 {
343         { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
344         { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
345         { 0xe0,  SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
346         { 0x2e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
347         { 0x4e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
348         { 0, 0 }
349 };
350
351 /* Globals */
352
353 static struct smsc_ircc_cb *dev_self[] = { NULL, NULL };
354 static unsigned short dev_count;
355
356 static inline void register_bank(int iobase, int bank)
357 {
358         outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)),
359                iobase + IRCC_MASTER);
360 }
361
362 #ifdef  CONFIG_PNP
363 /* PNP hotplug support */
364 static const struct pnp_device_id smsc_ircc_pnp_table[] = {
365         { .id = "SMCf010", .driver_data = 0 },
366         /* and presumably others */
367         { }
368 };
369 MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
370 #endif
371
372
373 /*******************************************************************************
374  *
375  *
376  * SMSC-ircc stuff
377  *
378  *
379  *******************************************************************************/
380
381 /*
382  * Function smsc_ircc_init ()
383  *
384  *    Initialize chip. Just try to find out how many chips we are dealing with
385  *    and where they are
386  */
387 static int __init smsc_ircc_init(void)
388 {
389         int ret;
390
391         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
392
393         ret = platform_driver_register(&smsc_ircc_driver);
394         if (ret) {
395                 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
396                 return ret;
397         }
398
399 #ifdef CONFIG_PCI
400         if (smsc_ircc_preconfigure_subsystems(ircc_cfg, ircc_fir, ircc_sir, ircc_dma, ircc_irq) < 0) {
401                 /* Ignore errors from preconfiguration */
402                 IRDA_ERROR("%s, Preconfiguration failed !\n", driver_name);
403         }
404 #endif
405
406         dev_count = 0;
407
408         if (ircc_fir > 0 && ircc_sir > 0) {
409                 IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
410                 IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
411
412                 if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq))
413                         ret = -ENODEV;
414         } else {
415                 ret = -ENODEV;
416
417                 /* try user provided configuration register base address */
418                 if (ircc_cfg > 0) {
419                         IRDA_MESSAGE(" Overriding configuration address "
420                                      "0x%04x\n", ircc_cfg);
421                         if (!smsc_superio_fdc(ircc_cfg))
422                                 ret = 0;
423                         if (!smsc_superio_lpc(ircc_cfg))
424                                 ret = 0;
425                 }
426
427                 if (smsc_ircc_look_for_chips() > 0)
428                         ret = 0;
429         }
430
431         if (ret)
432                 platform_driver_unregister(&smsc_ircc_driver);
433
434         return ret;
435 }
436
437 /*
438  * Function smsc_ircc_open (firbase, sirbase, dma, irq)
439  *
440  *    Try to open driver instance
441  *
442  */
443 static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
444 {
445         struct smsc_ircc_cb *self;
446         struct net_device *dev;
447         int err;
448
449         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
450
451         err = smsc_ircc_present(fir_base, sir_base);
452         if (err)
453                 goto err_out;
454
455         err = -ENOMEM;
456         if (dev_count >= ARRAY_SIZE(dev_self)) {
457                 IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
458                 goto err_out1;
459         }
460
461         /*
462          *  Allocate new instance of the driver
463          */
464         dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
465         if (!dev) {
466                 IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
467                 goto err_out1;
468         }
469
470         SET_MODULE_OWNER(dev);
471
472         dev->hard_start_xmit = smsc_ircc_hard_xmit_sir;
473 #if SMSC_IRCC2_C_NET_TIMEOUT
474         dev->tx_timeout      = smsc_ircc_timeout;
475         dev->watchdog_timeo  = HZ * 2;  /* Allow enough time for speed change */
476 #endif
477         dev->open            = smsc_ircc_net_open;
478         dev->stop            = smsc_ircc_net_close;
479         dev->do_ioctl        = smsc_ircc_net_ioctl;
480         dev->get_stats       = smsc_ircc_net_get_stats;
481
482         self = netdev_priv(dev);
483         self->netdev = dev;
484
485         /* Make ifconfig display some details */
486         dev->base_addr = self->io.fir_base = fir_base;
487         dev->irq = self->io.irq = irq;
488
489         /* Need to store self somewhere */
490         dev_self[dev_count] = self;
491         spin_lock_init(&self->lock);
492
493         self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE;
494         self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE;
495
496         self->rx_buff.head =
497                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
498                                    &self->rx_buff_dma, GFP_KERNEL);
499         if (self->rx_buff.head == NULL) {
500                 IRDA_ERROR("%s, Can't allocate memory for receive buffer!\n",
501                            driver_name);
502                 goto err_out2;
503         }
504
505         self->tx_buff.head =
506                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
507                                    &self->tx_buff_dma, GFP_KERNEL);
508         if (self->tx_buff.head == NULL) {
509                 IRDA_ERROR("%s, Can't allocate memory for transmit buffer!\n",
510                            driver_name);
511                 goto err_out3;
512         }
513
514         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
515         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
516
517         self->rx_buff.in_frame = FALSE;
518         self->rx_buff.state = OUTSIDE_FRAME;
519         self->tx_buff.data = self->tx_buff.head;
520         self->rx_buff.data = self->rx_buff.head;
521
522         smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
523         smsc_ircc_setup_qos(self);
524         smsc_ircc_init_chip(self);
525
526         if (ircc_transceiver > 0  &&
527             ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
528                 self->transceiver = ircc_transceiver;
529         else
530                 smsc_ircc_probe_transceiver(self);
531
532         err = register_netdev(self->netdev);
533         if (err) {
534                 IRDA_ERROR("%s, Network device registration failed!\n",
535                            driver_name);
536                 goto err_out4;
537         }
538
539         self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME,
540                                                       dev_count, NULL, 0);
541         if (IS_ERR(self->pldev)) {
542                 err = PTR_ERR(self->pldev);
543                 goto err_out5;
544         }
545         platform_set_drvdata(self->pldev, self);
546
547         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
548         dev_count++;
549
550         return 0;
551
552  err_out5:
553         unregister_netdev(self->netdev);
554
555  err_out4:
556         dma_free_coherent(NULL, self->tx_buff.truesize,
557                           self->tx_buff.head, self->tx_buff_dma);
558  err_out3:
559         dma_free_coherent(NULL, self->rx_buff.truesize,
560                           self->rx_buff.head, self->rx_buff_dma);
561  err_out2:
562         free_netdev(self->netdev);
563         dev_self[dev_count] = NULL;
564  err_out1:
565         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
566         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
567  err_out:
568         return err;
569 }
570
571 /*
572  * Function smsc_ircc_present(fir_base, sir_base)
573  *
574  *    Check the smsc-ircc chip presence
575  *
576  */
577 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
578 {
579         unsigned char low, high, chip, config, dma, irq, version;
580
581         if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
582                             driver_name)) {
583                 IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
584                              __FUNCTION__, fir_base);
585                 goto out1;
586         }
587
588         if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
589                             driver_name)) {
590                 IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
591                              __FUNCTION__, sir_base);
592                 goto out2;
593         }
594
595         register_bank(fir_base, 3);
596
597         high    = inb(fir_base + IRCC_ID_HIGH);
598         low     = inb(fir_base + IRCC_ID_LOW);
599         chip    = inb(fir_base + IRCC_CHIP_ID);
600         version = inb(fir_base + IRCC_VERSION);
601         config  = inb(fir_base + IRCC_INTERFACE);
602         dma     = config & IRCC_INTERFACE_DMA_MASK;
603         irq     = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
604
605         if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
606                 IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
607                              __FUNCTION__, fir_base);
608                 goto out3;
609         }
610         IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
611                      "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
612                      chip & 0x0f, version, fir_base, sir_base, dma, irq);
613
614         return 0;
615
616  out3:
617         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
618  out2:
619         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
620  out1:
621         return -ENODEV;
622 }
623
624 /*
625  * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq)
626  *
627  *    Setup I/O
628  *
629  */
630 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self,
631                                unsigned int fir_base, unsigned int sir_base,
632                                u8 dma, u8 irq)
633 {
634         unsigned char config, chip_dma, chip_irq;
635
636         register_bank(fir_base, 3);
637         config = inb(fir_base + IRCC_INTERFACE);
638         chip_dma = config & IRCC_INTERFACE_DMA_MASK;
639         chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
640
641         self->io.fir_base  = fir_base;
642         self->io.sir_base  = sir_base;
643         self->io.fir_ext   = SMSC_IRCC2_FIR_CHIP_IO_EXTENT;
644         self->io.sir_ext   = SMSC_IRCC2_SIR_CHIP_IO_EXTENT;
645         self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE;
646         self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED;
647
648         if (irq < 255) {
649                 if (irq != chip_irq)
650                         IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
651                                      driver_name, chip_irq, irq);
652                 self->io.irq = irq;
653         } else
654                 self->io.irq = chip_irq;
655
656         if (dma < 255) {
657                 if (dma != chip_dma)
658                         IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
659                                      driver_name, chip_dma, dma);
660                 self->io.dma = dma;
661         } else
662                 self->io.dma = chip_dma;
663
664 }
665
666 /*
667  * Function smsc_ircc_setup_qos(self)
668  *
669  *    Setup qos
670  *
671  */
672 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self)
673 {
674         /* Initialize QoS for this device */
675         irda_init_max_qos_capabilies(&self->qos);
676
677         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
678                 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
679
680         self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME;
681         self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE;
682         irda_qos_bits_to_value(&self->qos);
683 }
684
685 /*
686  * Function smsc_ircc_init_chip(self)
687  *
688  *    Init chip
689  *
690  */
691 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
692 {
693         int iobase = self->io.fir_base;
694
695         register_bank(iobase, 0);
696         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
697         outb(0x00, iobase + IRCC_MASTER);
698
699         register_bank(iobase, 1);
700         outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A),
701              iobase + IRCC_SCE_CFGA);
702
703 #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
704         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
705              iobase + IRCC_SCE_CFGB);
706 #else
707         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
708              iobase + IRCC_SCE_CFGB);
709 #endif
710         (void) inb(iobase + IRCC_FIFO_THRESHOLD);
711         outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
712
713         register_bank(iobase, 4);
714         outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL);
715
716         register_bank(iobase, 0);
717         outb(0, iobase + IRCC_LCR_A);
718
719         smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
720
721         /* Power on device */
722         outb(0x00, iobase + IRCC_MASTER);
723 }
724
725 /*
726  * Function smsc_ircc_net_ioctl (dev, rq, cmd)
727  *
728  *    Process IOCTL commands for this device
729  *
730  */
731 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
732 {
733         struct if_irda_req *irq = (struct if_irda_req *) rq;
734         struct smsc_ircc_cb *self;
735         unsigned long flags;
736         int ret = 0;
737
738         IRDA_ASSERT(dev != NULL, return -1;);
739
740         self = netdev_priv(dev);
741
742         IRDA_ASSERT(self != NULL, return -1;);
743
744         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
745
746         switch (cmd) {
747         case SIOCSBANDWIDTH: /* Set bandwidth */
748                 if (!capable(CAP_NET_ADMIN))
749                         ret = -EPERM;
750                 else {
751                         /* Make sure we are the only one touching
752                          * self->io.speed and the hardware - Jean II */
753                         spin_lock_irqsave(&self->lock, flags);
754                         smsc_ircc_change_speed(self, irq->ifr_baudrate);
755                         spin_unlock_irqrestore(&self->lock, flags);
756                 }
757                 break;
758         case SIOCSMEDIABUSY: /* Set media busy */
759                 if (!capable(CAP_NET_ADMIN)) {
760                         ret = -EPERM;
761                         break;
762                 }
763
764                 irda_device_set_media_busy(self->netdev, TRUE);
765                 break;
766         case SIOCGRECEIVING: /* Check if we are receiving right now */
767                 irq->ifr_receiving = smsc_ircc_is_receiving(self);
768                 break;
769         #if 0
770         case SIOCSDTRRTS:
771                 if (!capable(CAP_NET_ADMIN)) {
772                         ret = -EPERM;
773                         break;
774                 }
775                 smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
776                 break;
777         #endif
778         default:
779                 ret = -EOPNOTSUPP;
780         }
781
782         return ret;
783 }
784
785 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev)
786 {
787         struct smsc_ircc_cb *self = netdev_priv(dev);
788
789         return &self->stats;
790 }
791
792 #if SMSC_IRCC2_C_NET_TIMEOUT
793 /*
794  * Function smsc_ircc_timeout (struct net_device *dev)
795  *
796  *    The networking timeout management.
797  *
798  */
799
800 static void smsc_ircc_timeout(struct net_device *dev)
801 {
802         struct smsc_ircc_cb *self = netdev_priv(dev);
803         unsigned long flags;
804
805         IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n",
806                      dev->name, self->io.speed);
807         spin_lock_irqsave(&self->lock, flags);
808         smsc_ircc_sir_start(self);
809         smsc_ircc_change_speed(self, self->io.speed);
810         dev->trans_start = jiffies;
811         netif_wake_queue(dev);
812         spin_unlock_irqrestore(&self->lock, flags);
813 }
814 #endif
815
816 /*
817  * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev)
818  *
819  *    Transmits the current frame until FIFO is full, then
820  *    waits until the next transmit interrupt, and continues until the
821  *    frame is transmitted.
822  */
823 int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
824 {
825         struct smsc_ircc_cb *self;
826         unsigned long flags;
827         s32 speed;
828
829         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
830
831         IRDA_ASSERT(dev != NULL, return 0;);
832
833         self = netdev_priv(dev);
834         IRDA_ASSERT(self != NULL, return 0;);
835
836         netif_stop_queue(dev);
837
838         /* Make sure test of self->io.speed & speed change are atomic */
839         spin_lock_irqsave(&self->lock, flags);
840
841         /* Check if we need to change the speed */
842         speed = irda_get_next_speed(skb);
843         if (speed != self->io.speed && speed != -1) {
844                 /* Check for empty frame */
845                 if (!skb->len) {
846                         /*
847                          * We send frames one by one in SIR mode (no
848                          * pipelining), so at this point, if we were sending
849                          * a previous frame, we just received the interrupt
850                          * telling us it is finished (UART_IIR_THRI).
851                          * Therefore, waiting for the transmitter to really
852                          * finish draining the fifo won't take too long.
853                          * And the interrupt handler is not expected to run.
854                          * - Jean II */
855                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
856                         smsc_ircc_change_speed(self, speed);
857                         spin_unlock_irqrestore(&self->lock, flags);
858                         dev_kfree_skb(skb);
859                         return 0;
860                 }
861                 self->new_speed = speed;
862         }
863
864         /* Init tx buffer */
865         self->tx_buff.data = self->tx_buff.head;
866
867         /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
868         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
869                                            self->tx_buff.truesize);
870
871         self->stats.tx_bytes += self->tx_buff.len;
872
873         /* Turn on transmit finished interrupt. Will fire immediately!  */
874         outb(UART_IER_THRI, self->io.sir_base + UART_IER);
875
876         spin_unlock_irqrestore(&self->lock, flags);
877
878         dev_kfree_skb(skb);
879
880         return 0;
881 }
882
883 /*
884  * Function smsc_ircc_set_fir_speed (self, baud)
885  *
886  *    Change the speed of the device
887  *
888  */
889 static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
890 {
891         int fir_base, ir_mode, ctrl, fast;
892
893         IRDA_ASSERT(self != NULL, return;);
894         fir_base = self->io.fir_base;
895
896         self->io.speed = speed;
897
898         switch (speed) {
899         default:
900         case 576000:
901                 ir_mode = IRCC_CFGA_IRDA_HDLC;
902                 ctrl = IRCC_CRC;
903                 fast = 0;
904                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
905                 break;
906         case 1152000:
907                 ir_mode = IRCC_CFGA_IRDA_HDLC;
908                 ctrl = IRCC_1152 | IRCC_CRC;
909                 fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
910                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
911                            __FUNCTION__);
912                 break;
913         case 4000000:
914                 ir_mode = IRCC_CFGA_IRDA_4PPM;
915                 ctrl = IRCC_CRC;
916                 fast = IRCC_LCR_A_FAST;
917                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
918                            __FUNCTION__);
919                 break;
920         }
921         #if 0
922         Now in tranceiver!
923         /* This causes an interrupt */
924         register_bank(fir_base, 0);
925         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast, fir_base + IRCC_LCR_A);
926         #endif
927
928         register_bank(fir_base, 1);
929         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA);
930
931         register_bank(fir_base, 4);
932         outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL);
933 }
934
935 /*
936  * Function smsc_ircc_fir_start(self)
937  *
938  *    Change the speed of the device
939  *
940  */
941 static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
942 {
943         struct net_device *dev;
944         int fir_base;
945
946         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
947
948         IRDA_ASSERT(self != NULL, return;);
949         dev = self->netdev;
950         IRDA_ASSERT(dev != NULL, return;);
951
952         fir_base = self->io.fir_base;
953
954         /* Reset everything */
955
956         /* Install FIR transmit handler */
957         dev->hard_start_xmit = smsc_ircc_hard_xmit_fir;
958
959         /* Clear FIFO */
960         outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A);
961
962         /* Enable interrupt */
963         /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/
964
965         register_bank(fir_base, 1);
966
967         /* Select the TX/RX interface */
968 #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
969         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
970              fir_base + IRCC_SCE_CFGB);
971 #else
972         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
973              fir_base + IRCC_SCE_CFGB);
974 #endif
975         (void) inb(fir_base + IRCC_FIFO_THRESHOLD);
976
977         /* Enable SCE interrupts */
978         outb(0, fir_base + IRCC_MASTER);
979         register_bank(fir_base, 0);
980         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER);
981         outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER);
982 }
983
984 /*
985  * Function smsc_ircc_fir_stop(self, baud)
986  *
987  *    Change the speed of the device
988  *
989  */
990 static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
991 {
992         int fir_base;
993
994         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
995
996         IRDA_ASSERT(self != NULL, return;);
997
998         fir_base = self->io.fir_base;
999         register_bank(fir_base, 0);
1000         /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/
1001         outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B);
1002 }
1003
1004
1005 /*
1006  * Function smsc_ircc_change_speed(self, baud)
1007  *
1008  *    Change the speed of the device
1009  *
1010  * This function *must* be called with spinlock held, because it may
1011  * be called from the irq handler. - Jean II
1012  */
1013 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
1014 {
1015         struct net_device *dev;
1016         int last_speed_was_sir;
1017
1018         IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
1019
1020         IRDA_ASSERT(self != NULL, return;);
1021         dev = self->netdev;
1022
1023         last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED;
1024
1025         #if 0
1026         /* Temp Hack */
1027         speed= 1152000;
1028         self->io.speed = speed;
1029         last_speed_was_sir = 0;
1030         smsc_ircc_fir_start(self);
1031         #endif
1032
1033         if (self->io.speed == 0)
1034                 smsc_ircc_sir_start(self);
1035
1036         #if 0
1037         if (!last_speed_was_sir) speed = self->io.speed;
1038         #endif
1039
1040         if (self->io.speed != speed)
1041                 smsc_ircc_set_transceiver_for_speed(self, speed);
1042
1043         self->io.speed = speed;
1044
1045         if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1046                 if (!last_speed_was_sir) {
1047                         smsc_ircc_fir_stop(self);
1048                         smsc_ircc_sir_start(self);
1049                 }
1050                 smsc_ircc_set_sir_speed(self, speed);
1051         } else {
1052                 if (last_speed_was_sir) {
1053                         #if SMSC_IRCC2_C_SIR_STOP
1054                         smsc_ircc_sir_stop(self);
1055                         #endif
1056                         smsc_ircc_fir_start(self);
1057                 }
1058                 smsc_ircc_set_fir_speed(self, speed);
1059
1060                 #if 0
1061                 self->tx_buff.len = 10;
1062                 self->tx_buff.data = self->tx_buff.head;
1063
1064                 smsc_ircc_dma_xmit(self, 4000);
1065                 #endif
1066                 /* Be ready for incoming frames */
1067                 smsc_ircc_dma_receive(self);
1068         }
1069
1070         netif_wake_queue(dev);
1071 }
1072
1073 /*
1074  * Function smsc_ircc_set_sir_speed (self, speed)
1075  *
1076  *    Set speed of IrDA port to specified baudrate
1077  *
1078  */
1079 void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
1080 {
1081         int iobase;
1082         int fcr;    /* FIFO control reg */
1083         int lcr;    /* Line control reg */
1084         int divisor;
1085
1086         IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
1087
1088         IRDA_ASSERT(self != NULL, return;);
1089         iobase = self->io.sir_base;
1090
1091         /* Update accounting for new speed */
1092         self->io.speed = speed;
1093
1094         /* Turn off interrupts */
1095         outb(0, iobase + UART_IER);
1096
1097         divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed;
1098
1099         fcr = UART_FCR_ENABLE_FIFO;
1100
1101         /*
1102          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1103          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1104          * about this timeout since it will always be fast enough.
1105          */
1106         fcr |= self->io.speed < 38400 ?
1107                 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1108
1109         /* IrDA ports use 8N1 */
1110         lcr = UART_LCR_WLEN8;
1111
1112         outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
1113         outb(divisor & 0xff,      iobase + UART_DLL); /* Set speed */
1114         outb(divisor >> 8,        iobase + UART_DLM);
1115         outb(lcr,                 iobase + UART_LCR); /* Set 8N1 */
1116         outb(fcr,                 iobase + UART_FCR); /* Enable FIFO's */
1117
1118         /* Turn on interrups */
1119         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
1120
1121         IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
1122 }
1123
1124
1125 /*
1126  * Function smsc_ircc_hard_xmit_fir (skb, dev)
1127  *
1128  *    Transmit the frame!
1129  *
1130  */
1131 static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
1132 {
1133         struct smsc_ircc_cb *self;
1134         unsigned long flags;
1135         s32 speed;
1136         int mtt;
1137
1138         IRDA_ASSERT(dev != NULL, return 0;);
1139         self = netdev_priv(dev);
1140         IRDA_ASSERT(self != NULL, return 0;);
1141
1142         netif_stop_queue(dev);
1143
1144         /* Make sure test of self->io.speed & speed change are atomic */
1145         spin_lock_irqsave(&self->lock, flags);
1146
1147         /* Check if we need to change the speed after this frame */
1148         speed = irda_get_next_speed(skb);
1149         if (speed != self->io.speed && speed != -1) {
1150                 /* Check for empty frame */
1151                 if (!skb->len) {
1152                         /* Note : you should make sure that speed changes
1153                          * are not going to corrupt any outgoing frame.
1154                          * Look at nsc-ircc for the gory details - Jean II */
1155                         smsc_ircc_change_speed(self, speed);
1156                         spin_unlock_irqrestore(&self->lock, flags);
1157                         dev_kfree_skb(skb);
1158                         return 0;
1159                 }
1160
1161                 self->new_speed = speed;
1162         }
1163
1164         memcpy(self->tx_buff.head, skb->data, skb->len);
1165
1166         self->tx_buff.len = skb->len;
1167         self->tx_buff.data = self->tx_buff.head;
1168
1169         mtt = irda_get_mtt(skb);
1170         if (mtt) {
1171                 int bofs;
1172
1173                 /*
1174                  * Compute how many BOFs (STA or PA's) we need to waste the
1175                  * min turn time given the speed of the link.
1176                  */
1177                 bofs = mtt * (self->io.speed / 1000) / 8000;
1178                 if (bofs > 4095)
1179                         bofs = 4095;
1180
1181                 smsc_ircc_dma_xmit(self, bofs);
1182         } else {
1183                 /* Transmit frame */
1184                 smsc_ircc_dma_xmit(self, 0);
1185         }
1186
1187         spin_unlock_irqrestore(&self->lock, flags);
1188         dev_kfree_skb(skb);
1189
1190         return 0;
1191 }
1192
1193 /*
1194  * Function smsc_ircc_dma_xmit (self, bofs)
1195  *
1196  *    Transmit data using DMA
1197  *
1198  */
1199 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
1200 {
1201         int iobase = self->io.fir_base;
1202         u8 ctrl;
1203
1204         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1205 #if 1
1206         /* Disable Rx */
1207         register_bank(iobase, 0);
1208         outb(0x00, iobase + IRCC_LCR_B);
1209 #endif
1210         register_bank(iobase, 1);
1211         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1212              iobase + IRCC_SCE_CFGB);
1213
1214         self->io.direction = IO_XMIT;
1215
1216         /* Set BOF additional count for generating the min turn time */
1217         register_bank(iobase, 4);
1218         outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO);
1219         ctrl = inb(iobase + IRCC_CONTROL) & 0xf0;
1220         outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI);
1221
1222         /* Set max Tx frame size */
1223         outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI);
1224         outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO);
1225
1226         /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
1227
1228         /* Enable burst mode chip Tx DMA */
1229         register_bank(iobase, 1);
1230         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1231              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1232
1233         /* Setup DMA controller (must be done after enabling chip DMA) */
1234         irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
1235                        DMA_TX_MODE);
1236
1237         /* Enable interrupt */
1238
1239         register_bank(iobase, 0);
1240         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1241         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1242
1243         /* Enable transmit */
1244         outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B);
1245 }
1246
1247 /*
1248  * Function smsc_ircc_dma_xmit_complete (self)
1249  *
1250  *    The transfer of a frame in finished. This function will only be called
1251  *    by the interrupt handler
1252  *
1253  */
1254 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
1255 {
1256         int iobase = self->io.fir_base;
1257
1258         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1259 #if 0
1260         /* Disable Tx */
1261         register_bank(iobase, 0);
1262         outb(0x00, iobase + IRCC_LCR_B);
1263 #endif
1264         register_bank(iobase, 1);
1265         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1266              iobase + IRCC_SCE_CFGB);
1267
1268         /* Check for underrun! */
1269         register_bank(iobase, 0);
1270         if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) {
1271                 self->stats.tx_errors++;
1272                 self->stats.tx_fifo_errors++;
1273
1274                 /* Reset error condition */
1275                 register_bank(iobase, 0);
1276                 outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER);
1277                 outb(0x00, iobase + IRCC_MASTER);
1278         } else {
1279                 self->stats.tx_packets++;
1280                 self->stats.tx_bytes += self->tx_buff.len;
1281         }
1282
1283         /* Check if it's time to change the speed */
1284         if (self->new_speed) {
1285                 smsc_ircc_change_speed(self, self->new_speed);
1286                 self->new_speed = 0;
1287         }
1288
1289         netif_wake_queue(self->netdev);
1290 }
1291
1292 /*
1293  * Function smsc_ircc_dma_receive(self)
1294  *
1295  *    Get ready for receiving a frame. The device will initiate a DMA
1296  *    if it starts to receive a frame.
1297  *
1298  */
1299 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self)
1300 {
1301         int iobase = self->io.fir_base;
1302 #if 0
1303         /* Turn off chip DMA */
1304         register_bank(iobase, 1);
1305         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1306              iobase + IRCC_SCE_CFGB);
1307 #endif
1308
1309         /* Disable Tx */
1310         register_bank(iobase, 0);
1311         outb(0x00, iobase + IRCC_LCR_B);
1312
1313         /* Turn off chip DMA */
1314         register_bank(iobase, 1);
1315         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1316              iobase + IRCC_SCE_CFGB);
1317
1318         self->io.direction = IO_RECV;
1319         self->rx_buff.data = self->rx_buff.head;
1320
1321         /* Set max Rx frame size */
1322         register_bank(iobase, 4);
1323         outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI);
1324         outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO);
1325
1326         /* Setup DMA controller */
1327         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1328                        DMA_RX_MODE);
1329
1330         /* Enable burst mode chip Rx DMA */
1331         register_bank(iobase, 1);
1332         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1333              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1334
1335         /* Enable interrupt */
1336         register_bank(iobase, 0);
1337         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1338         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1339
1340         /* Enable receiver */
1341         register_bank(iobase, 0);
1342         outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
1343              iobase + IRCC_LCR_B);
1344
1345         return 0;
1346 }
1347
1348 /*
1349  * Function smsc_ircc_dma_receive_complete(self)
1350  *
1351  *    Finished with receiving frames
1352  *
1353  */
1354 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
1355 {
1356         struct sk_buff *skb;
1357         int len, msgcnt, lsr;
1358         int iobase = self->io.fir_base;
1359
1360         register_bank(iobase, 0);
1361
1362         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1363 #if 0
1364         /* Disable Rx */
1365         register_bank(iobase, 0);
1366         outb(0x00, iobase + IRCC_LCR_B);
1367 #endif
1368         register_bank(iobase, 0);
1369         outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR);
1370         lsr= inb(iobase + IRCC_LSR);
1371         msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
1372
1373         IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
1374                    get_dma_residue(self->io.dma));
1375
1376         len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
1377
1378         /* Look for errors */
1379         if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
1380                 self->stats.rx_errors++;
1381                 if (lsr & IRCC_LSR_FRAME_ERROR)
1382                         self->stats.rx_frame_errors++;
1383                 if (lsr & IRCC_LSR_CRC_ERROR)
1384                         self->stats.rx_crc_errors++;
1385                 if (lsr & IRCC_LSR_SIZE_ERROR)
1386                         self->stats.rx_length_errors++;
1387                 if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN))
1388                         self->stats.rx_length_errors++;
1389                 return;
1390         }
1391
1392         /* Remove CRC */
1393         len -= self->io.speed < 4000000 ? 2 : 4;
1394
1395         if (len < 2 || len > 2050) {
1396                 IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
1397                 return;
1398         }
1399         IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
1400
1401         skb = dev_alloc_skb(len + 1);
1402         if (!skb) {
1403                 IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
1404                              __FUNCTION__);
1405                 return;
1406         }
1407         /* Make sure IP header gets aligned */
1408         skb_reserve(skb, 1);
1409
1410         memcpy(skb_put(skb, len), self->rx_buff.data, len);
1411         self->stats.rx_packets++;
1412         self->stats.rx_bytes += len;
1413
1414         skb->dev = self->netdev;
1415         skb->mac.raw  = skb->data;
1416         skb->protocol = htons(ETH_P_IRDA);
1417         netif_rx(skb);
1418 }
1419
1420 /*
1421  * Function smsc_ircc_sir_receive (self)
1422  *
1423  *    Receive one frame from the infrared port
1424  *
1425  */
1426 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
1427 {
1428         int boguscount = 0;
1429         int iobase;
1430
1431         IRDA_ASSERT(self != NULL, return;);
1432
1433         iobase = self->io.sir_base;
1434
1435         /*
1436          * Receive all characters in Rx FIFO, unwrap and unstuff them.
1437          * async_unwrap_char will deliver all found frames
1438          */
1439         do {
1440                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
1441                                   inb(iobase + UART_RX));
1442
1443                 /* Make sure we don't stay here to long */
1444                 if (boguscount++ > 32) {
1445                         IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
1446                         break;
1447                 }
1448         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
1449 }
1450
1451
1452 /*
1453  * Function smsc_ircc_interrupt (irq, dev_id, regs)
1454  *
1455  *    An interrupt from the chip has arrived. Time to do some work
1456  *
1457  */
1458 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id)
1459 {
1460         struct net_device *dev = (struct net_device *) dev_id;
1461         struct smsc_ircc_cb *self;
1462         int iobase, iir, lcra, lsr;
1463         irqreturn_t ret = IRQ_NONE;
1464
1465         if (dev == NULL) {
1466                 printk(KERN_WARNING "%s: irq %d for unknown device.\n",
1467                        driver_name, irq);
1468                 goto irq_ret;
1469         }
1470
1471         self = netdev_priv(dev);
1472         IRDA_ASSERT(self != NULL, return IRQ_NONE;);
1473
1474         /* Serialise the interrupt handler in various CPUs, stop Tx path */
1475         spin_lock(&self->lock);
1476
1477         /* Check if we should use the SIR interrupt handler */
1478         if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1479                 ret = smsc_ircc_interrupt_sir(dev);
1480                 goto irq_ret_unlock;
1481         }
1482
1483         iobase = self->io.fir_base;
1484
1485         register_bank(iobase, 0);
1486         iir = inb(iobase + IRCC_IIR);
1487         if (iir == 0)
1488                 goto irq_ret_unlock;
1489         ret = IRQ_HANDLED;
1490
1491         /* Disable interrupts */
1492         outb(0, iobase + IRCC_IER);
1493         lcra = inb(iobase + IRCC_LCR_A);
1494         lsr = inb(iobase + IRCC_LSR);
1495
1496         IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
1497
1498         if (iir & IRCC_IIR_EOM) {
1499                 if (self->io.direction == IO_RECV)
1500                         smsc_ircc_dma_receive_complete(self);
1501                 else
1502                         smsc_ircc_dma_xmit_complete(self);
1503
1504                 smsc_ircc_dma_receive(self);
1505         }
1506
1507         if (iir & IRCC_IIR_ACTIVE_FRAME) {
1508                 /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
1509         }
1510
1511         /* Enable interrupts again */
1512
1513         register_bank(iobase, 0);
1514         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1515
1516  irq_ret_unlock:
1517         spin_unlock(&self->lock);
1518  irq_ret:
1519         return ret;
1520 }
1521
1522 /*
1523  * Function irport_interrupt_sir (irq, dev_id)
1524  *
1525  *    Interrupt handler for SIR modes
1526  */
1527 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
1528 {
1529         struct smsc_ircc_cb *self = netdev_priv(dev);
1530         int boguscount = 0;
1531         int iobase;
1532         int iir, lsr;
1533
1534         /* Already locked comming here in smsc_ircc_interrupt() */
1535         /*spin_lock(&self->lock);*/
1536
1537         iobase = self->io.sir_base;
1538
1539         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1540         if (iir == 0)
1541                 return IRQ_NONE;
1542         while (iir) {
1543                 /* Clear interrupt */
1544                 lsr = inb(iobase + UART_LSR);
1545
1546                 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
1547                             __FUNCTION__, iir, lsr, iobase);
1548
1549                 switch (iir) {
1550                 case UART_IIR_RLSI:
1551                         IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
1552                         break;
1553                 case UART_IIR_RDI:
1554                         /* Receive interrupt */
1555                         smsc_ircc_sir_receive(self);
1556                         break;
1557                 case UART_IIR_THRI:
1558                         if (lsr & UART_LSR_THRE)
1559                                 /* Transmitter ready for data */
1560                                 smsc_ircc_sir_write_wakeup(self);
1561                         break;
1562                 default:
1563                         IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
1564                                    __FUNCTION__, iir);
1565                         break;
1566                 }
1567
1568                 /* Make sure we don't stay here to long */
1569                 if (boguscount++ > 100)
1570                         break;
1571
1572                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1573         }
1574         /*spin_unlock(&self->lock);*/
1575         return IRQ_HANDLED;
1576 }
1577
1578
1579 #if 0 /* unused */
1580 /*
1581  * Function ircc_is_receiving (self)
1582  *
1583  *    Return TRUE is we are currently receiving a frame
1584  *
1585  */
1586 static int ircc_is_receiving(struct smsc_ircc_cb *self)
1587 {
1588         int status = FALSE;
1589         /* int iobase; */
1590
1591         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1592
1593         IRDA_ASSERT(self != NULL, return FALSE;);
1594
1595         IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
1596                    get_dma_residue(self->io.dma));
1597
1598         status = (self->rx_buff.state != OUTSIDE_FRAME);
1599
1600         return status;
1601 }
1602 #endif /* unused */
1603
1604 static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
1605 {
1606         int error;
1607
1608         error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
1609                             self->netdev->name, self->netdev);
1610         if (error)
1611                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
1612                            __FUNCTION__, self->io.irq, error);
1613
1614         return error;
1615 }
1616
1617 static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self)
1618 {
1619         unsigned long flags;
1620
1621         spin_lock_irqsave(&self->lock, flags);
1622
1623         self->io.speed = 0;
1624         smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
1625
1626         spin_unlock_irqrestore(&self->lock, flags);
1627 }
1628
1629 static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self)
1630 {
1631         int iobase = self->io.fir_base;
1632         unsigned long flags;
1633
1634         spin_lock_irqsave(&self->lock, flags);
1635
1636         register_bank(iobase, 0);
1637         outb(0, iobase + IRCC_IER);
1638         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
1639         outb(0x00, iobase + IRCC_MASTER);
1640
1641         spin_unlock_irqrestore(&self->lock, flags);
1642 }
1643
1644
1645 /*
1646  * Function smsc_ircc_net_open (dev)
1647  *
1648  *    Start the device
1649  *
1650  */
1651 static int smsc_ircc_net_open(struct net_device *dev)
1652 {
1653         struct smsc_ircc_cb *self;
1654         char hwname[16];
1655
1656         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1657
1658         IRDA_ASSERT(dev != NULL, return -1;);
1659         self = netdev_priv(dev);
1660         IRDA_ASSERT(self != NULL, return 0;);
1661
1662         if (self->io.suspended) {
1663                 IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
1664                 return -EAGAIN;
1665         }
1666
1667         if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
1668                         (void *) dev)) {
1669                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
1670                            __FUNCTION__, self->io.irq);
1671                 return -EAGAIN;
1672         }
1673
1674         smsc_ircc_start_interrupts(self);
1675
1676         /* Give self a hardware name */
1677         /* It would be cool to offer the chip revision here - Jean II */
1678         sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base);
1679
1680         /*
1681          * Open new IrLAP layer instance, now that everything should be
1682          * initialized properly
1683          */
1684         self->irlap = irlap_open(dev, &self->qos, hwname);
1685
1686         /*
1687          * Always allocate the DMA channel after the IRQ,
1688          * and clean up on failure.
1689          */
1690         if (request_dma(self->io.dma, dev->name)) {
1691                 smsc_ircc_net_close(dev);
1692
1693                 IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
1694                              __FUNCTION__, self->io.dma);
1695                 return -EAGAIN;
1696         }
1697
1698         netif_start_queue(dev);
1699
1700         return 0;
1701 }
1702
1703 /*
1704  * Function smsc_ircc_net_close (dev)
1705  *
1706  *    Stop the device
1707  *
1708  */
1709 static int smsc_ircc_net_close(struct net_device *dev)
1710 {
1711         struct smsc_ircc_cb *self;
1712
1713         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1714
1715         IRDA_ASSERT(dev != NULL, return -1;);
1716         self = netdev_priv(dev);
1717         IRDA_ASSERT(self != NULL, return 0;);
1718
1719         /* Stop device */
1720         netif_stop_queue(dev);
1721
1722         /* Stop and remove instance of IrLAP */
1723         if (self->irlap)
1724                 irlap_close(self->irlap);
1725         self->irlap = NULL;
1726
1727         smsc_ircc_stop_interrupts(self);
1728
1729         /* if we are called from smsc_ircc_resume we don't have IRQ reserved */
1730         if (!self->io.suspended)
1731                 free_irq(self->io.irq, dev);
1732
1733         disable_dma(self->io.dma);
1734         free_dma(self->io.dma);
1735
1736         return 0;
1737 }
1738
1739 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
1740 {
1741         struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1742
1743         if (!self->io.suspended) {
1744                 IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
1745
1746                 rtnl_lock();
1747                 if (netif_running(self->netdev)) {
1748                         netif_device_detach(self->netdev);
1749                         smsc_ircc_stop_interrupts(self);
1750                         free_irq(self->io.irq, self->netdev);
1751                         disable_dma(self->io.dma);
1752                 }
1753                 self->io.suspended = 1;
1754                 rtnl_unlock();
1755         }
1756
1757         return 0;
1758 }
1759
1760 static int smsc_ircc_resume(struct platform_device *dev)
1761 {
1762         struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1763
1764         if (self->io.suspended) {
1765                 IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
1766
1767                 rtnl_lock();
1768                 smsc_ircc_init_chip(self);
1769                 if (netif_running(self->netdev)) {
1770                         if (smsc_ircc_request_irq(self)) {
1771                                 /*
1772                                  * Don't fail resume process, just kill this
1773                                  * network interface
1774                                  */
1775                                 unregister_netdevice(self->netdev);
1776                         } else {
1777                                 enable_dma(self->io.dma);
1778                                 smsc_ircc_start_interrupts(self);
1779                                 netif_device_attach(self->netdev);
1780                         }
1781                 }
1782                 self->io.suspended = 0;
1783                 rtnl_unlock();
1784         }
1785         return 0;
1786 }
1787
1788 /*
1789  * Function smsc_ircc_close (self)
1790  *
1791  *    Close driver instance
1792  *
1793  */
1794 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
1795 {
1796         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1797
1798         IRDA_ASSERT(self != NULL, return -1;);
1799
1800         platform_device_unregister(self->pldev);
1801
1802         /* Remove netdevice */
1803         unregister_netdev(self->netdev);
1804
1805         smsc_ircc_stop_interrupts(self);
1806
1807         /* Release the PORTS that this driver is using */
1808         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __FUNCTION__,
1809                    self->io.fir_base);
1810
1811         release_region(self->io.fir_base, self->io.fir_ext);
1812
1813         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
1814                    self->io.sir_base);
1815
1816         release_region(self->io.sir_base, self->io.sir_ext);
1817
1818         if (self->tx_buff.head)
1819                 dma_free_coherent(NULL, self->tx_buff.truesize,
1820                                   self->tx_buff.head, self->tx_buff_dma);
1821
1822         if (self->rx_buff.head)
1823                 dma_free_coherent(NULL, self->rx_buff.truesize,
1824                                   self->rx_buff.head, self->rx_buff_dma);
1825
1826         free_netdev(self->netdev);
1827
1828         return 0;
1829 }
1830
1831 static void __exit smsc_ircc_cleanup(void)
1832 {
1833         int i;
1834
1835         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1836
1837         for (i = 0; i < 2; i++) {
1838                 if (dev_self[i])
1839                         smsc_ircc_close(dev_self[i]);
1840         }
1841
1842         platform_driver_unregister(&smsc_ircc_driver);
1843 }
1844
1845 /*
1846  *      Start SIR operations
1847  *
1848  * This function *must* be called with spinlock held, because it may
1849  * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II
1850  */
1851 void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
1852 {
1853         struct net_device *dev;
1854         int fir_base, sir_base;
1855
1856         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1857
1858         IRDA_ASSERT(self != NULL, return;);
1859         dev = self->netdev;
1860         IRDA_ASSERT(dev != NULL, return;);
1861         dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir;
1862
1863         fir_base = self->io.fir_base;
1864         sir_base = self->io.sir_base;
1865
1866         /* Reset everything */
1867         outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);
1868
1869         #if SMSC_IRCC2_C_SIR_STOP
1870         /*smsc_ircc_sir_stop(self);*/
1871         #endif
1872
1873         register_bank(fir_base, 1);
1874         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA);
1875
1876         /* Initialize UART */
1877         outb(UART_LCR_WLEN8, sir_base + UART_LCR);  /* Reset DLAB */
1878         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
1879
1880         /* Turn on interrups */
1881         outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
1882
1883         IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
1884
1885         outb(0x00, fir_base + IRCC_MASTER);
1886 }
1887
1888 #if SMSC_IRCC2_C_SIR_STOP
1889 void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
1890 {
1891         int iobase;
1892
1893         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1894         iobase = self->io.sir_base;
1895
1896         /* Reset UART */
1897         outb(0, iobase + UART_MCR);
1898
1899         /* Turn off interrupts */
1900         outb(0, iobase + UART_IER);
1901 }
1902 #endif
1903
1904 /*
1905  * Function smsc_sir_write_wakeup (self)
1906  *
1907  *    Called by the SIR interrupt handler when there's room for more data.
1908  *    If we have more packets to send, we send them here.
1909  *
1910  */
1911 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
1912 {
1913         int actual = 0;
1914         int iobase;
1915         int fcr;
1916
1917         IRDA_ASSERT(self != NULL, return;);
1918
1919         IRDA_DEBUG(4, "%s\n", __FUNCTION__);
1920
1921         iobase = self->io.sir_base;
1922
1923         /* Finished with frame?  */
1924         if (self->tx_buff.len > 0)  {
1925                 /* Write data left in transmit buffer */
1926                 actual = smsc_ircc_sir_write(iobase, self->io.fifo_size,
1927                                       self->tx_buff.data, self->tx_buff.len);
1928                 self->tx_buff.data += actual;
1929                 self->tx_buff.len  -= actual;
1930         } else {
1931
1932         /*if (self->tx_buff.len ==0)  {*/
1933
1934                 /*
1935                  *  Now serial buffer is almost free & we can start
1936                  *  transmission of another packet. But first we must check
1937                  *  if we need to change the speed of the hardware
1938                  */
1939                 if (self->new_speed) {
1940                         IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
1941                                    __FUNCTION__, self->new_speed);
1942                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
1943                         smsc_ircc_change_speed(self, self->new_speed);
1944                         self->new_speed = 0;
1945                 } else {
1946                         /* Tell network layer that we want more frames */
1947                         netif_wake_queue(self->netdev);
1948                 }
1949                 self->stats.tx_packets++;
1950
1951                 if (self->io.speed <= 115200) {
1952                         /*
1953                          * Reset Rx FIFO to make sure that all reflected transmit data
1954                          * is discarded. This is needed for half duplex operation
1955                          */
1956                         fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
1957                         fcr |= self->io.speed < 38400 ?
1958                                         UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1959
1960                         outb(fcr, iobase + UART_FCR);
1961
1962                         /* Turn on receive interrupts */
1963                         outb(UART_IER_RDI, iobase + UART_IER);
1964                 }
1965         }
1966 }
1967
1968 /*
1969  * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len)
1970  *
1971  *    Fill Tx FIFO with transmit data
1972  *
1973  */
1974 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
1975 {
1976         int actual = 0;
1977
1978         /* Tx FIFO should be empty! */
1979         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
1980                 IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
1981                 return 0;
1982         }
1983
1984         /* Fill FIFO with current frame */
1985         while (fifo_size-- > 0 && actual < len) {
1986                 /* Transmit next byte */
1987                 outb(buf[actual], iobase + UART_TX);
1988                 actual++;
1989         }
1990         return actual;
1991 }
1992
1993 /*
1994  * Function smsc_ircc_is_receiving (self)
1995  *
1996  *    Returns true is we are currently receiving data
1997  *
1998  */
1999 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self)
2000 {
2001         return (self->rx_buff.state != OUTSIDE_FRAME);
2002 }
2003
2004
2005 /*
2006  * Function smsc_ircc_probe_transceiver(self)
2007  *
2008  *    Tries to find the used Transceiver
2009  *
2010  */
2011 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self)
2012 {
2013         unsigned int    i;
2014
2015         IRDA_ASSERT(self != NULL, return;);
2016
2017         for (i = 0; smsc_transceivers[i].name != NULL; i++)
2018                 if (smsc_transceivers[i].probe(self->io.fir_base)) {
2019                         IRDA_MESSAGE(" %s transceiver found\n",
2020                                      smsc_transceivers[i].name);
2021                         self->transceiver= i + 1;
2022                         return;
2023                 }
2024
2025         IRDA_MESSAGE("No transceiver found. Defaulting to %s\n",
2026                      smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
2027
2028         self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
2029 }
2030
2031
2032 /*
2033  * Function smsc_ircc_set_transceiver_for_speed(self, speed)
2034  *
2035  *    Set the transceiver according to the speed
2036  *
2037  */
2038 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed)
2039 {
2040         unsigned int trx;
2041
2042         trx = self->transceiver;
2043         if (trx > 0)
2044                 smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed);
2045 }
2046
2047 /*
2048  * Function smsc_ircc_wait_hw_transmitter_finish ()
2049  *
2050  *    Wait for the real end of HW transmission
2051  *
2052  * The UART is a strict FIFO, and we get called only when we have finished
2053  * pushing data to the FIFO, so the maximum amount of time we must wait
2054  * is only for the FIFO to drain out.
2055  *
2056  * We use a simple calibrated loop. We may need to adjust the loop
2057  * delay (udelay) to balance I/O traffic and latency. And we also need to
2058  * adjust the maximum timeout.
2059  * It would probably be better to wait for the proper interrupt,
2060  * but it doesn't seem to be available.
2061  *
2062  * We can't use jiffies or kernel timers because :
2063  * 1) We are called from the interrupt handler, which disable softirqs,
2064  * so jiffies won't be increased
2065  * 2) Jiffies granularity is usually very coarse (10ms), and we don't
2066  * want to wait that long to detect stuck hardware.
2067  * Jean II
2068  */
2069
2070 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
2071 {
2072         int iobase = self->io.sir_base;
2073         int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
2074
2075         /* Calibrated busy loop */
2076         while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
2077                 udelay(1);
2078
2079         if (count == 0)
2080                 IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
2081 }
2082
2083
2084 /* PROBING
2085  *
2086  * REVISIT we can be told about the device by PNP, and should use that info
2087  * instead of probing hardware and creating a platform_device ...
2088  */
2089
2090 static int __init smsc_ircc_look_for_chips(void)
2091 {
2092         struct smsc_chip_address *address;
2093         char *type;
2094         unsigned int cfg_base, found;
2095
2096         found = 0;
2097         address = possible_addresses;
2098
2099         while (address->cfg_base) {
2100                 cfg_base = address->cfg_base;
2101
2102                 /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
2103
2104                 if (address->type & SMSCSIO_TYPE_FDC) {
2105                         type = "FDC";
2106                         if (address->type & SMSCSIO_TYPE_FLAT)
2107                                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type))
2108                                         found++;
2109
2110                         if (address->type & SMSCSIO_TYPE_PAGED)
2111                                 if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type))
2112                                         found++;
2113                 }
2114                 if (address->type & SMSCSIO_TYPE_LPC) {
2115                         type = "LPC";
2116                         if (address->type & SMSCSIO_TYPE_FLAT)
2117                                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type))
2118                                         found++;
2119
2120                         if (address->type & SMSCSIO_TYPE_PAGED)
2121                                 if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type))
2122                                         found++;
2123                 }
2124                 address++;
2125         }
2126         return found;
2127 }
2128
2129 /*
2130  * Function smsc_superio_flat (chip, base, type)
2131  *
2132  *    Try to get configuration of a smc SuperIO chip with flat register model
2133  *
2134  */
2135 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type)
2136 {
2137         unsigned short firbase, sirbase;
2138         u8 mode, dma, irq;
2139         int ret = -ENODEV;
2140
2141         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2142
2143         if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
2144                 return ret;
2145
2146         outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
2147         mode = inb(cfgbase + 1);
2148
2149         /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
2150
2151         if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
2152                 IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
2153
2154         outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
2155         sirbase = inb(cfgbase + 1) << 2;
2156
2157         /* FIR iobase */
2158         outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
2159         firbase = inb(cfgbase + 1) << 3;
2160
2161         /* DMA */
2162         outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
2163         dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
2164
2165         /* IRQ */
2166         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
2167         irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2168
2169         IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
2170
2171         if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
2172                 ret = 0;
2173
2174         /* Exit configuration */
2175         outb(SMSCSIO_CFGEXITKEY, cfgbase);
2176
2177         return ret;
2178 }
2179
2180 /*
2181  * Function smsc_superio_paged (chip, base, type)
2182  *
2183  *    Try  to get configuration of a smc SuperIO chip with paged register model
2184  *
2185  */
2186 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type)
2187 {
2188         unsigned short fir_io, sir_io;
2189         int ret = -ENODEV;
2190
2191         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2192
2193         if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
2194                 return ret;
2195
2196         /* Select logical device (UART2) */
2197         outb(0x07, cfg_base);
2198         outb(0x05, cfg_base + 1);
2199
2200         /* SIR iobase */
2201         outb(0x60, cfg_base);
2202         sir_io = inb(cfg_base + 1) << 8;
2203         outb(0x61, cfg_base);
2204         sir_io |= inb(cfg_base + 1);
2205
2206         /* Read FIR base */
2207         outb(0x62, cfg_base);
2208         fir_io = inb(cfg_base + 1) << 8;
2209         outb(0x63, cfg_base);
2210         fir_io |= inb(cfg_base + 1);
2211         outb(0x2b, cfg_base); /* ??? */
2212
2213         if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
2214                 ret = 0;
2215
2216         /* Exit configuration */
2217         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2218
2219         return ret;
2220 }
2221
2222
2223 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
2224 {
2225         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2226
2227         outb(reg, cfg_base);
2228         return inb(cfg_base) != reg ? -1 : 0;
2229 }
2230
2231 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
2232 {
2233         u8 devid, xdevid, rev;
2234
2235         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2236
2237         /* Leave configuration */
2238
2239         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2240
2241         if (inb(cfg_base) == SMSCSIO_CFGEXITKEY)        /* not a smc superio chip */
2242                 return NULL;
2243
2244         outb(reg, cfg_base);
2245
2246         xdevid = inb(cfg_base + 1);
2247
2248         /* Enter configuration */
2249
2250         outb(SMSCSIO_CFGACCESSKEY, cfg_base);
2251
2252         #if 0
2253         if (smsc_access(cfg_base,0x55)) /* send second key and check */
2254                 return NULL;
2255         #endif
2256
2257         /* probe device ID */
2258
2259         if (smsc_access(cfg_base, reg))
2260                 return NULL;
2261
2262         devid = inb(cfg_base + 1);
2263
2264         if (devid == 0 || devid == 0xff)        /* typical values for unused port */
2265                 return NULL;
2266
2267         /* probe revision ID */
2268
2269         if (smsc_access(cfg_base, reg + 1))
2270                 return NULL;
2271
2272         rev = inb(cfg_base + 1);
2273
2274         if (rev >= 128)                 /* i think this will make no sense */
2275                 return NULL;
2276
2277         if (devid == xdevid)            /* protection against false positives */
2278                 return NULL;
2279
2280         /* Check for expected device ID; are there others? */
2281
2282         while (chip->devid != devid) {
2283
2284                 chip++;
2285
2286                 if (chip->name == NULL)
2287                         return NULL;
2288         }
2289
2290         IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",
2291                      devid, rev, cfg_base, type, chip->name);
2292
2293         if (chip->rev > rev) {
2294                 IRDA_MESSAGE("Revision higher than expected\n");
2295                 return NULL;
2296         }
2297
2298         if (chip->flags & NoIRDA)
2299                 IRDA_MESSAGE("chipset does not support IRDA\n");
2300
2301         return chip;
2302 }
2303
2304 static int __init smsc_superio_fdc(unsigned short cfg_base)
2305 {
2306         int ret = -1;
2307
2308         if (!request_region(cfg_base, 2, driver_name)) {
2309                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2310                              __FUNCTION__, cfg_base);
2311         } else {
2312                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
2313                     !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
2314                         ret =  0;
2315
2316                 release_region(cfg_base, 2);
2317         }
2318
2319         return ret;
2320 }
2321
2322 static int __init smsc_superio_lpc(unsigned short cfg_base)
2323 {
2324         int ret = -1;
2325
2326         if (!request_region(cfg_base, 2, driver_name)) {
2327                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2328                              __FUNCTION__, cfg_base);
2329         } else {
2330                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
2331                     !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
2332                         ret = 0;
2333
2334                 release_region(cfg_base, 2);
2335         }
2336         return ret;
2337 }
2338
2339 /*
2340  * Look for some specific subsystem setups that need
2341  * pre-configuration not properly done by the BIOS (especially laptops)
2342  * This code is based in part on smcinit.c, tosh1800-smcinit.c
2343  * and tosh2450-smcinit.c. The table lists the device entries
2344  * for ISA bridges with an LPC (Low Pin Count) controller which
2345  * handles the communication with the SMSC device. After the LPC
2346  * controller is initialized through PCI, the SMSC device is initialized
2347  * through a dedicated port in the ISA port-mapped I/O area, this latter
2348  * area is used to configure the SMSC device with default
2349  * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
2350  * used different sets of parameters and different control port
2351  * addresses making a subsystem device table necessary.
2352  */
2353 #ifdef CONFIG_PCI
2354 #define PCIID_VENDOR_INTEL 0x8086
2355 #define PCIID_VENDOR_ALI 0x10b9
2356 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
2357         /*
2358          * Subsystems needing entries:
2359          * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
2360          * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family
2361          * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family
2362          */
2363         {
2364                 /* Guessed entry */
2365                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2366                 .device = 0x24cc,
2367                 .subvendor = 0x103c,
2368                 .subdevice = 0x08bc,
2369                 .sir_io = 0x02f8,
2370                 .fir_io = 0x0130,
2371                 .fir_irq = 0x05,
2372                 .fir_dma = 0x03,
2373                 .cfg_base = 0x004e,
2374                 .preconfigure = preconfigure_through_82801,
2375                 .name = "HP nx5000 family",
2376         },
2377         {
2378                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2379                 .device = 0x24cc,
2380                 .subvendor = 0x103c,
2381                 .subdevice = 0x088c,
2382                 /* Quite certain these are the same for nc8000 as for nc6000 */
2383                 .sir_io = 0x02f8,
2384                 .fir_io = 0x0130,
2385                 .fir_irq = 0x05,
2386                 .fir_dma = 0x03,
2387                 .cfg_base = 0x004e,
2388                 .preconfigure = preconfigure_through_82801,
2389                 .name = "HP nc8000 family",
2390         },
2391         {
2392                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2393                 .device = 0x24cc,
2394                 .subvendor = 0x103c,
2395                 .subdevice = 0x0890,
2396                 .sir_io = 0x02f8,
2397                 .fir_io = 0x0130,
2398                 .fir_irq = 0x05,
2399                 .fir_dma = 0x03,
2400                 .cfg_base = 0x004e,
2401                 .preconfigure = preconfigure_through_82801,
2402                 .name = "HP nc6000 family",
2403         },
2404         {
2405                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2406                 .device = 0x24cc,
2407                 .subvendor = 0x0e11,
2408                 .subdevice = 0x0860,
2409                 /* I assume these are the same for x1000 as for the others */
2410                 .sir_io = 0x02e8,
2411                 .fir_io = 0x02f8,
2412                 .fir_irq = 0x07,
2413                 .fir_dma = 0x03,
2414                 .cfg_base = 0x002e,
2415                 .preconfigure = preconfigure_through_82801,
2416                 .name = "Compaq x1000 family",
2417         },
2418         {
2419                 /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
2420                 .vendor = PCIID_VENDOR_INTEL,
2421                 .device = 0x24c0,
2422                 .subvendor = 0x1179,
2423                 .subdevice = 0xffff, /* 0xffff is "any" */
2424                 .sir_io = 0x03f8,
2425                 .fir_io = 0x0130,
2426                 .fir_irq = 0x07,
2427                 .fir_dma = 0x01,
2428                 .cfg_base = 0x002e,
2429                 .preconfigure = preconfigure_through_82801,
2430                 .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
2431         },
2432         {
2433                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
2434                 .device = 0x248c,
2435                 .subvendor = 0x1179,
2436                 .subdevice = 0xffff, /* 0xffff is "any" */
2437                 .sir_io = 0x03f8,
2438                 .fir_io = 0x0130,
2439                 .fir_irq = 0x03,
2440                 .fir_dma = 0x03,
2441                 .cfg_base = 0x002e,
2442                 .preconfigure = preconfigure_through_82801,
2443                 .name = "Toshiba laptop with Intel 82801CAM ISA bridge",
2444         },
2445         {
2446                 /* 82801DBM (ICH4-M) LPC Interface Bridge */
2447                 .vendor = PCIID_VENDOR_INTEL,
2448                 .device = 0x24cc,
2449                 .subvendor = 0x1179,
2450                 .subdevice = 0xffff, /* 0xffff is "any" */
2451                 .sir_io = 0x03f8,
2452                 .fir_io = 0x0130,
2453                 .fir_irq = 0x03,
2454                 .fir_dma = 0x03,
2455                 .cfg_base = 0x002e,
2456                 .preconfigure = preconfigure_through_82801,
2457                 .name = "Toshiba laptop with Intel 8281DBM LPC bridge",
2458         },
2459         {
2460                 /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
2461                 .vendor = PCIID_VENDOR_ALI,
2462                 .device = 0x1533,
2463                 .subvendor = 0x1179,
2464                 .subdevice = 0xffff, /* 0xffff is "any" */
2465                 .sir_io = 0x02e8,
2466                 .fir_io = 0x02f8,
2467                 .fir_irq = 0x07,
2468                 .fir_dma = 0x03,
2469                 .cfg_base = 0x002e,
2470                 .preconfigure = preconfigure_through_ali,
2471                 .name = "Toshiba laptop with ALi ISA bridge",
2472         },
2473         { } // Terminator
2474 };
2475
2476
2477 /*
2478  * This sets up the basic SMSC parameters
2479  * (FIR port, SIR port, FIR DMA, FIR IRQ)
2480  * through the chip configuration port.
2481  */
2482 static int __init preconfigure_smsc_chip(struct
2483                                          smsc_ircc_subsystem_configuration
2484                                          *conf)
2485 {
2486         unsigned short iobase = conf->cfg_base;
2487         unsigned char tmpbyte;
2488
2489         outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
2490         outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
2491         tmpbyte = inb(iobase +1); // Read device ID
2492         IRDA_DEBUG(0,
2493                    "Detected Chip id: 0x%02x, setting up registers...\n",
2494                    tmpbyte);
2495
2496         /* Disable UART1 and set up SIR I/O port */
2497         outb(0x24, iobase);  // select CR24 - UART1 base addr
2498         outb(0x00, iobase + 1); // disable UART1
2499         outb(SMSCSIOFLAT_UART2BASEADDR_REG, iobase);  // select CR25 - UART2 base addr
2500         outb( (conf->sir_io >> 2), iobase + 1); // bits 2-9 of 0x3f8
2501         tmpbyte = inb(iobase + 1);
2502         if (tmpbyte != (conf->sir_io >> 2) ) {
2503                 IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
2504                 IRDA_WARNING("Try to supply ircc_cfg argument.\n");
2505                 return -ENXIO;
2506         }
2507
2508         /* Set up FIR IRQ channel for UART2 */
2509         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, iobase); // select CR28 - UART1,2 IRQ select
2510         tmpbyte = inb(iobase + 1);
2511         tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion
2512         tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK);
2513         outb(tmpbyte, iobase + 1);
2514         tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2515         if (tmpbyte != conf->fir_irq) {
2516                 IRDA_WARNING("ERROR: could not configure FIR IRQ channel.\n");
2517                 return -ENXIO;
2518         }
2519
2520         /* Set up FIR I/O port */
2521         outb(SMSCSIOFLAT_FIRBASEADDR_REG, iobase);  // CR2B - SCE (FIR) base addr
2522         outb((conf->fir_io >> 3), iobase + 1);
2523         tmpbyte = inb(iobase + 1);
2524         if (tmpbyte != (conf->fir_io >> 3) ) {
2525                 IRDA_WARNING("ERROR: could not configure FIR I/O port.\n");
2526                 return -ENXIO;
2527         }
2528
2529         /* Set up FIR DMA channel */
2530         outb(SMSCSIOFLAT_FIRDMASELECT_REG, iobase);  // CR2C - SCE (FIR) DMA select
2531         outb((conf->fir_dma & LPC47N227_FIRDMASELECT_MASK), iobase + 1); // DMA
2532         tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK;
2533         if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) {
2534                 IRDA_WARNING("ERROR: could not configure FIR DMA channel.\n");
2535                 return -ENXIO;
2536         }
2537
2538         outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase);  // CR0C - UART mode
2539         tmpbyte = inb(iobase + 1);
2540         tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
2541                 SMSCSIOFLAT_UART2MODE_VAL_IRDA;
2542         outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
2543
2544         outb(LPC47N227_APMBOOTDRIVE_REG, iobase);  // CR07 - Auto Pwr Mgt/boot drive sel
2545         tmpbyte = inb(iobase + 1);
2546         outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down
2547
2548         /* This one was not part of tosh1800 */
2549         outb(0x0a, iobase);  // CR0a - ecp fifo / ir mux
2550         tmpbyte = inb(iobase + 1);
2551         outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port
2552
2553         outb(LPC47N227_UART12POWER_REG, iobase);  // CR02 - UART 1,2 power
2554         tmpbyte = inb(iobase + 1);
2555         outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down
2556
2557         outb(LPC47N227_FDCPOWERVALIDCONF_REG, iobase);  // CR00 - FDC Power/valid config cycle
2558         tmpbyte = inb(iobase + 1);
2559         outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done
2560
2561         outb(LPC47N227_CFGEXITKEY, iobase);  // Exit configuration
2562
2563         return 0;
2564 }
2565
2566 /* 82801CAM generic registers */
2567 #define VID 0x00
2568 #define DID 0x02
2569 #define PIRQ_A_D_ROUT 0x60
2570 #define SIRQ_CNTL 0x64
2571 #define PIRQ_E_H_ROUT 0x68
2572 #define PCI_DMA_C 0x90
2573 /* LPC-specific registers */
2574 #define COM_DEC 0xe0
2575 #define GEN1_DEC 0xe4
2576 #define LPC_EN 0xe6
2577 #define GEN2_DEC 0xec
2578 /*
2579  * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
2580  * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
2581  * They all work the same way!
2582  */
2583 static int __init preconfigure_through_82801(struct pci_dev *dev,
2584                                              struct
2585                                              smsc_ircc_subsystem_configuration
2586                                              *conf)
2587 {
2588         unsigned short tmpword;
2589         unsigned char tmpbyte;
2590
2591         IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
2592         /*
2593          * Select the range for the COMA COM port (SIR)
2594          * Register COM_DEC:
2595          * Bit 7: reserved
2596          * Bit 6-4, COMB decode range
2597          * Bit 3: reserved
2598          * Bit 2-0, COMA decode range
2599          *
2600          * Decode ranges:
2601          *   000 = 0x3f8-0x3ff (COM1)
2602          *   001 = 0x2f8-0x2ff (COM2)
2603          *   010 = 0x220-0x227
2604          *   011 = 0x228-0x22f
2605          *   100 = 0x238-0x23f
2606          *   101 = 0x2e8-0x2ef (COM4)
2607          *   110 = 0x338-0x33f
2608          *   111 = 0x3e8-0x3ef (COM3)
2609          */
2610         pci_read_config_byte(dev, COM_DEC, &tmpbyte);
2611         tmpbyte &= 0xf8; /* mask COMA bits */
2612         switch(conf->sir_io) {
2613         case 0x3f8:
2614                 tmpbyte |= 0x00;
2615                 break;
2616         case 0x2f8:
2617                 tmpbyte |= 0x01;
2618                 break;
2619         case 0x220:
2620                 tmpbyte |= 0x02;
2621                 break;
2622         case 0x228:
2623                 tmpbyte |= 0x03;
2624                 break;
2625         case 0x238:
2626                 tmpbyte |= 0x04;
2627                 break;
2628         case 0x2e8:
2629                 tmpbyte |= 0x05;
2630                 break;
2631         case 0x338:
2632                 tmpbyte |= 0x06;
2633                 break;
2634         case 0x3e8:
2635                 tmpbyte |= 0x07;
2636                 break;
2637         default:
2638                 tmpbyte |= 0x01; /* COM2 default */
2639         }
2640         IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
2641         pci_write_config_byte(dev, COM_DEC, tmpbyte);
2642
2643         /* Enable Low Pin Count interface */
2644         pci_read_config_word(dev, LPC_EN, &tmpword);
2645         /* These seem to be set up at all times,
2646          * just make sure it is properly set.
2647          */
2648         switch(conf->cfg_base) {
2649         case 0x04e:
2650                 tmpword |= 0x2000;
2651                 break;
2652         case 0x02e:
2653                 tmpword |= 0x1000;
2654                 break;
2655         case 0x062:
2656                 tmpword |= 0x0800;
2657                 break;
2658         case 0x060:
2659                 tmpword |= 0x0400;
2660                 break;
2661         default:
2662                 IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
2663                              conf->cfg_base);
2664                 break;
2665         }
2666         tmpword &= 0xfffd; /* disable LPC COMB */
2667         tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
2668         IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
2669         pci_write_config_word(dev, LPC_EN, tmpword);
2670
2671         /*
2672          * Configure LPC DMA channel
2673          * PCI_DMA_C bits:
2674          * Bit 15-14: DMA channel 7 select
2675          * Bit 13-12: DMA channel 6 select
2676          * Bit 11-10: DMA channel 5 select
2677          * Bit 9-8:   Reserved
2678          * Bit 7-6:   DMA channel 3 select
2679          * Bit 5-4:   DMA channel 2 select
2680          * Bit 3-2:   DMA channel 1 select
2681          * Bit 1-0:   DMA channel 0 select
2682          *  00 = Reserved value
2683          *  01 = PC/PCI DMA
2684          *  10 = Reserved value
2685          *  11 = LPC I/F DMA
2686          */
2687         pci_read_config_word(dev, PCI_DMA_C, &tmpword);
2688         switch(conf->fir_dma) {
2689         case 0x07:
2690                 tmpword |= 0xc000;
2691                 break;
2692         case 0x06:
2693                 tmpword |= 0x3000;
2694                 break;
2695         case 0x05:
2696                 tmpword |= 0x0c00;
2697                 break;
2698         case 0x03:
2699                 tmpword |= 0x00c0;
2700                 break;
2701         case 0x02:
2702                 tmpword |= 0x0030;
2703                 break;
2704         case 0x01:
2705                 tmpword |= 0x000c;
2706                 break;
2707         case 0x00:
2708                 tmpword |= 0x0003;
2709                 break;
2710         default:
2711                 break; /* do not change settings */
2712         }
2713         IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
2714         pci_write_config_word(dev, PCI_DMA_C, tmpword);
2715
2716         /*
2717          * GEN2_DEC bits:
2718          * Bit 15-4: Generic I/O range
2719          * Bit 3-1: reserved (read as 0)
2720          * Bit 0: enable GEN2 range on LPC I/F
2721          */
2722         tmpword = conf->fir_io & 0xfff8;
2723         tmpword |= 0x0001;
2724         IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
2725         pci_write_config_word(dev, GEN2_DEC, tmpword);
2726
2727         /* Pre-configure chip */
2728         return preconfigure_smsc_chip(conf);
2729 }
2730
2731 /*
2732  * Pre-configure a certain port on the ALi 1533 bridge.
2733  * This is based on reverse-engineering since ALi does not
2734  * provide any data sheet for the 1533 chip.
2735  */
2736 static void __init preconfigure_ali_port(struct pci_dev *dev,
2737                                          unsigned short port)
2738 {
2739         unsigned char reg;
2740         /* These bits obviously control the different ports */
2741         unsigned char mask;
2742         unsigned char tmpbyte;
2743
2744         switch(port) {
2745         case 0x0130:
2746         case 0x0178:
2747                 reg = 0xb0;
2748                 mask = 0x80;
2749                 break;
2750         case 0x03f8:
2751                 reg = 0xb4;
2752                 mask = 0x80;
2753                 break;
2754         case 0x02f8:
2755                 reg = 0xb4;
2756                 mask = 0x30;
2757                 break;
2758         case 0x02e8:
2759                 reg = 0xb4;
2760                 mask = 0x08;
2761                 break;
2762         default:
2763                 IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
2764                 return;
2765         }
2766
2767         pci_read_config_byte(dev, reg, &tmpbyte);
2768         /* Turn on the right bits */
2769         tmpbyte |= mask;
2770         pci_write_config_byte(dev, reg, tmpbyte);
2771         IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
2772         return;
2773 }
2774
2775 static int __init preconfigure_through_ali(struct pci_dev *dev,
2776                                            struct
2777                                            smsc_ircc_subsystem_configuration
2778                                            *conf)
2779 {
2780         /* Configure the two ports on the ALi 1533 */
2781         preconfigure_ali_port(dev, conf->sir_io);
2782         preconfigure_ali_port(dev, conf->fir_io);
2783
2784         /* Pre-configure chip */
2785         return preconfigure_smsc_chip(conf);
2786 }
2787
2788 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
2789                                                     unsigned short ircc_fir,
2790                                                     unsigned short ircc_sir,
2791                                                     unsigned char ircc_dma,
2792                                                     unsigned char ircc_irq)
2793 {
2794         struct pci_dev *dev = NULL;
2795         unsigned short ss_vendor = 0x0000;
2796         unsigned short ss_device = 0x0000;
2797         int ret = 0;
2798
2799         dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
2800
2801         while (dev != NULL) {
2802                 struct smsc_ircc_subsystem_configuration *conf;
2803
2804                 /*
2805                  * Cache the subsystem vendor/device:
2806                  * some manufacturers fail to set this for all components,
2807                  * so we save it in case there is just 0x0000 0x0000 on the
2808                  * device we want to check.
2809                  */
2810                 if (dev->subsystem_vendor != 0x0000U) {
2811                         ss_vendor = dev->subsystem_vendor;
2812                         ss_device = dev->subsystem_device;
2813                 }
2814                 conf = subsystem_configurations;
2815                 for( ; conf->subvendor; conf++) {
2816                         if(conf->vendor == dev->vendor &&
2817                            conf->device == dev->device &&
2818                            conf->subvendor == ss_vendor &&
2819                            /* Sometimes these are cached values */
2820                            (conf->subdevice == ss_device ||
2821                             conf->subdevice == 0xffff)) {
2822                                 struct smsc_ircc_subsystem_configuration
2823                                         tmpconf;
2824
2825                                 memcpy(&tmpconf, conf,
2826                                        sizeof(struct smsc_ircc_subsystem_configuration));
2827
2828                                 /*
2829                                  * Override the default values with anything
2830                                  * passed in as parameter
2831                                  */
2832                                 if (ircc_cfg != 0)
2833                                         tmpconf.cfg_base = ircc_cfg;
2834                                 if (ircc_fir != 0)
2835                                         tmpconf.fir_io = ircc_fir;
2836                                 if (ircc_sir != 0)
2837                                         tmpconf.sir_io = ircc_sir;
2838                                 if (ircc_dma != 0xff)
2839                                         tmpconf.fir_dma = ircc_dma;
2840                                 if (ircc_irq != 0xff)
2841                                         tmpconf.fir_irq = ircc_irq;
2842
2843                                 IRDA_MESSAGE("Detected unconfigured %s SMSC IrDA chip, pre-configuring device.\n", conf->name);
2844                                 if (conf->preconfigure)
2845                                         ret = conf->preconfigure(dev, &tmpconf);
2846                                 else
2847                                         ret = -ENODEV;
2848                         }
2849                 }
2850                 dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
2851         }
2852
2853         return ret;
2854 }
2855 #endif // CONFIG_PCI
2856
2857 /************************************************
2858  *
2859  * Transceivers specific functions
2860  *
2861  ************************************************/
2862
2863
2864 /*
2865  * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed)
2866  *
2867  *    Program transceiver through smsc-ircc ATC circuitry
2868  *
2869  */
2870
2871 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
2872 {
2873         unsigned long jiffies_now, jiffies_timeout;
2874         u8 val;
2875
2876         jiffies_now = jiffies;
2877         jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
2878
2879         /* ATC */
2880         register_bank(fir_base, 4);
2881         outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE,
2882              fir_base + IRCC_ATC);
2883
2884         while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) &&
2885                 !time_after(jiffies, jiffies_timeout))
2886                 /* empty */;
2887
2888         if (val)
2889                 IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
2890                              inb(fir_base + IRCC_ATC));
2891 }
2892
2893 /*
2894  * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base)
2895  *
2896  *    Probe transceiver smsc-ircc ATC circuitry
2897  *
2898  */
2899
2900 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base)
2901 {
2902         return 0;
2903 }
2904
2905 /*
2906  * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed)
2907  *
2908  *    Set transceiver
2909  *
2910  */
2911
2912 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
2913 {
2914         u8 fast_mode;
2915
2916         switch (speed) {
2917         default:
2918         case 576000 :
2919                 fast_mode = 0;
2920                 break;
2921         case 1152000 :
2922         case 4000000 :
2923                 fast_mode = IRCC_LCR_A_FAST;
2924                 break;
2925         }
2926         register_bank(fir_base, 0);
2927         outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2928 }
2929
2930 /*
2931  * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base)
2932  *
2933  *    Probe transceiver
2934  *
2935  */
2936
2937 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base)
2938 {
2939         return 0;
2940 }
2941
2942 /*
2943  * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed)
2944  *
2945  *    Set transceiver
2946  *
2947  */
2948
2949 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
2950 {
2951         u8 fast_mode;
2952
2953         switch (speed) {
2954         default:
2955         case 576000 :
2956                 fast_mode = 0;
2957                 break;
2958         case 1152000 :
2959         case 4000000 :
2960                 fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
2961                 break;
2962
2963         }
2964         /* This causes an interrupt */
2965         register_bank(fir_base, 0);
2966         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2967 }
2968
2969 /*
2970  * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base)
2971  *
2972  *    Probe transceiver
2973  *
2974  */
2975
2976 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base)
2977 {
2978         return 0;
2979 }
2980
2981
2982 module_init(smsc_ircc_init);
2983 module_exit(smsc_ircc_cleanup);