Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6] / arch / arm / mach-omap1 / serial.c
1 /*
2  * linux/arch/arm/mach-omap1/serial.c
3  *
4  * OMAP1 serial support.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/irq.h>
15 #include <linux/delay.h>
16 #include <linux/serial.h>
17 #include <linux/tty.h>
18 #include <linux/serial_8250.h>
19 #include <linux/serial_reg.h>
20 #include <linux/clk.h>
21
22 #include <asm/io.h>
23 #include <asm/mach-types.h>
24
25 #include <asm/arch/board.h>
26 #include <asm/arch/mux.h>
27 #include <asm/arch/gpio.h>
28 #include <asm/arch/fpga.h>
29 #ifdef CONFIG_PM
30 #include <asm/arch/pm.h>
31 #endif
32
33 static struct clk * uart1_ck;
34 static struct clk * uart2_ck;
35 static struct clk * uart3_ck;
36
37 static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
38                                           int offset)
39 {
40         offset <<= up->regshift;
41         return (unsigned int)__raw_readb(up->membase + offset);
42 }
43
44 static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
45                                     int value)
46 {
47         offset <<= p->regshift;
48         __raw_writeb(value, p->membase + offset);
49 }
50
51 /*
52  * Internal UARTs need to be initialized for the 8250 autoconfig to work
53  * properly. Note that the TX watermark initialization may not be needed
54  * once the 8250.c watermark handling code is merged.
55  */
56 static void __init omap_serial_reset(struct plat_serial8250_port *p)
57 {
58         omap_serial_outp(p, UART_OMAP_MDR1, 0x07);      /* disable UART */
59         omap_serial_outp(p, UART_OMAP_SCR, 0x08);       /* TX watermark */
60         omap_serial_outp(p, UART_OMAP_MDR1, 0x00);      /* enable UART */
61
62         if (!cpu_is_omap15xx()) {
63                 omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
64                 while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
65         }
66 }
67
68 static struct plat_serial8250_port serial_platform_data[] = {
69         {
70                 .membase        = (char*)IO_ADDRESS(OMAP_UART1_BASE),
71                 .mapbase        = (unsigned long)OMAP_UART1_BASE,
72                 .irq            = INT_UART1,
73                 .flags          = UPF_BOOT_AUTOCONF,
74                 .iotype         = UPIO_MEM,
75                 .regshift       = 2,
76                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
77         },
78         {
79                 .membase        = (char*)IO_ADDRESS(OMAP_UART2_BASE),
80                 .mapbase        = (unsigned long)OMAP_UART2_BASE,
81                 .irq            = INT_UART2,
82                 .flags          = UPF_BOOT_AUTOCONF,
83                 .iotype         = UPIO_MEM,
84                 .regshift       = 2,
85                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
86         },
87         {
88                 .membase        = (char*)IO_ADDRESS(OMAP_UART3_BASE),
89                 .mapbase        = (unsigned long)OMAP_UART3_BASE,
90                 .irq            = INT_UART3,
91                 .flags          = UPF_BOOT_AUTOCONF,
92                 .iotype         = UPIO_MEM,
93                 .regshift       = 2,
94                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
95         },
96         { },
97 };
98
99 static struct platform_device serial_device = {
100         .name                   = "serial8250",
101         .id                     = PLAT8250_DEV_PLATFORM,
102         .dev                    = {
103                 .platform_data  = serial_platform_data,
104         },
105 };
106
107 /*
108  * Note that on Innovator-1510 UART2 pins conflict with USB2.
109  * By default UART2 does not work on Innovator-1510 if you have
110  * USB OHCI enabled. To use UART2, you must disable USB2 first.
111  */
112 void __init omap_serial_init(void)
113 {
114         int i;
115         const struct omap_uart_config *info;
116
117         if (cpu_is_omap730()) {
118                 serial_platform_data[0].regshift = 0;
119                 serial_platform_data[1].regshift = 0;
120                 serial_platform_data[0].irq = INT_730_UART_MODEM_1;
121                 serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
122         }
123
124         if (cpu_is_omap15xx()) {
125                 serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
126                 serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
127                 serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
128         }
129
130         info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
131         if (info == NULL)
132                 return;
133
134         for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
135                 unsigned char reg;
136
137                 if (!((1 << i) & info->enabled_uarts)) {
138                         serial_platform_data[i].membase = NULL;
139                         serial_platform_data[i].mapbase = 0;
140                         continue;
141                 }
142
143                 switch (i) {
144                 case 0:
145                         uart1_ck = clk_get(NULL, "uart1_ck");
146                         if (IS_ERR(uart1_ck))
147                                 printk("Could not get uart1_ck\n");
148                         else {
149                                 clk_enable(uart1_ck);
150                                 if (cpu_is_omap15xx())
151                                         clk_set_rate(uart1_ck, 12000000);
152                         }
153                         if (cpu_is_omap15xx()) {
154                                 omap_cfg_reg(UART1_TX);
155                                 omap_cfg_reg(UART1_RTS);
156                                 if (machine_is_omap_innovator()) {
157                                         reg = fpga_read(OMAP1510_FPGA_POWER);
158                                         reg |= OMAP1510_FPGA_PCR_COM1_EN;
159                                         fpga_write(reg, OMAP1510_FPGA_POWER);
160                                         udelay(10);
161                                 }
162                         }
163                         break;
164                 case 1:
165                         uart2_ck = clk_get(NULL, "uart2_ck");
166                         if (IS_ERR(uart2_ck))
167                                 printk("Could not get uart2_ck\n");
168                         else {
169                                 clk_enable(uart2_ck);
170                                 if (cpu_is_omap15xx())
171                                         clk_set_rate(uart2_ck, 12000000);
172                                 else
173                                         clk_set_rate(uart2_ck, 48000000);
174                         }
175                         if (cpu_is_omap15xx()) {
176                                 omap_cfg_reg(UART2_TX);
177                                 omap_cfg_reg(UART2_RTS);
178                                 if (machine_is_omap_innovator()) {
179                                         reg = fpga_read(OMAP1510_FPGA_POWER);
180                                         reg |= OMAP1510_FPGA_PCR_COM2_EN;
181                                         fpga_write(reg, OMAP1510_FPGA_POWER);
182                                         udelay(10);
183                                 }
184                         }
185                         break;
186                 case 2:
187                         uart3_ck = clk_get(NULL, "uart3_ck");
188                         if (IS_ERR(uart3_ck))
189                                 printk("Could not get uart3_ck\n");
190                         else {
191                                 clk_enable(uart3_ck);
192                                 if (cpu_is_omap15xx())
193                                         clk_set_rate(uart3_ck, 12000000);
194                         }
195                         if (cpu_is_omap15xx()) {
196                                 omap_cfg_reg(UART3_TX);
197                                 omap_cfg_reg(UART3_RX);
198                         }
199                         break;
200                 }
201                 omap_serial_reset(&serial_platform_data[i]);
202         }
203 }
204
205 #ifdef CONFIG_OMAP_SERIAL_WAKE
206
207 static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id)
208 {
209         /* Need to do something with serial port right after wake-up? */
210         return IRQ_HANDLED;
211 }
212
213 /*
214  * Reroutes serial RX lines to GPIO lines for the duration of
215  * sleep to allow waking up the device from serial port even
216  * in deep sleep.
217  */
218 void omap_serial_wake_trigger(int enable)
219 {
220         if (!cpu_is_omap16xx())
221                 return;
222
223         if (uart1_ck != NULL) {
224                 if (enable)
225                         omap_cfg_reg(V14_16XX_GPIO37);
226                 else
227                         omap_cfg_reg(V14_16XX_UART1_RX);
228         }
229         if (uart2_ck != NULL) {
230                 if (enable)
231                         omap_cfg_reg(R9_16XX_GPIO18);
232                 else
233                         omap_cfg_reg(R9_16XX_UART2_RX);
234         }
235         if (uart3_ck != NULL) {
236                 if (enable)
237                         omap_cfg_reg(L14_16XX_GPIO49);
238                 else
239                         omap_cfg_reg(L14_16XX_UART3_RX);
240         }
241 }
242
243 static void __init omap_serial_set_port_wakeup(int gpio_nr)
244 {
245         int ret;
246
247         ret = omap_request_gpio(gpio_nr);
248         if (ret < 0) {
249                 printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
250                        gpio_nr);
251                 return;
252         }
253         omap_set_gpio_direction(gpio_nr, 1);
254         ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
255                           IRQF_TRIGGER_RISING, "serial wakeup", NULL);
256         if (ret) {
257                 omap_free_gpio(gpio_nr);
258                 printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
259                        gpio_nr);
260                 return;
261         }
262         enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr));
263 }
264
265 static int __init omap_serial_wakeup_init(void)
266 {
267         if (!cpu_is_omap16xx())
268                 return 0;
269
270         if (uart1_ck != NULL)
271                 omap_serial_set_port_wakeup(37);
272         if (uart2_ck != NULL)
273                 omap_serial_set_port_wakeup(18);
274         if (uart3_ck != NULL)
275                 omap_serial_set_port_wakeup(49);
276
277         return 0;
278 }
279 late_initcall(omap_serial_wakeup_init);
280
281 #endif  /* CONFIG_OMAP_SERIAL_WAKE */
282
283 static int __init omap_init(void)
284 {
285         return platform_device_register(&serial_device);
286 }
287 arch_initcall(omap_init);