[PATCH] Dereference in tokenring/olympic.c
[linux-2.6] / drivers / scsi / 53c700.c
1 /* -*- mode: c; c-basic-offset: 8 -*- */
2
3 /* NCR (or Symbios) 53c700 and 53c700-66 Driver
4  *
5  * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
6 **-----------------------------------------------------------------------------
7 **  
8 **  This program is free software; you can redistribute it and/or modify
9 **  it under the terms of the GNU General Public License as published by
10 **  the Free Software Foundation; either version 2 of the License, or
11 **  (at your option) any later version.
12 **
13 **  This program is distributed in the hope that it will be useful,
14 **  but WITHOUT ANY WARRANTY; without even the implied warranty of
15 **  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 **  GNU General Public License for more details.
17 **
18 **  You should have received a copy of the GNU General Public License
19 **  along with this program; if not, write to the Free Software
20 **  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 **
22 **-----------------------------------------------------------------------------
23  */
24
25 /* Notes:
26  *
27  * This driver is designed exclusively for these chips (virtually the
28  * earliest of the scripts engine chips).  They need their own drivers
29  * because they are missing so many of the scripts and snazzy register
30  * features of their elder brothers (the 710, 720 and 770).
31  *
32  * The 700 is the lowliest of the line, it can only do async SCSI.
33  * The 700-66 can at least do synchronous SCSI up to 10MHz.
34  * 
35  * The 700 chip has no host bus interface logic of its own.  However,
36  * it is usually mapped to a location with well defined register
37  * offsets.  Therefore, if you can determine the base address and the
38  * irq your board incorporating this chip uses, you can probably use
39  * this driver to run it (although you'll probably have to write a
40  * minimal wrapper for the purpose---see the NCR_D700 driver for
41  * details about how to do this).
42  *
43  *
44  * TODO List:
45  *
46  * 1. Better statistics in the proc fs
47  *
48  * 2. Implement message queue (queues SCSI messages like commands) and make
49  *    the abort and device reset functions use them.
50  * */
51
52 /* CHANGELOG
53  *
54  * Version 2.8
55  *
56  * Fixed bad bug affecting tag starvation processing (previously the
57  * driver would hang the system if too many tags starved.  Also fixed
58  * bad bug having to do with 10 byte command processing and REQUEST
59  * SENSE (the command would loop forever getting a transfer length
60  * mismatch in the CMD phase).
61  *
62  * Version 2.7
63  *
64  * Fixed scripts problem which caused certain devices (notably CDRWs)
65  * to hang on initial INQUIRY.  Updated NCR_700_readl/writel to use
66  * __raw_readl/writel for parisc compatibility (Thomas
67  * Bogendoerfer). Added missing SCp->request_bufflen initialisation
68  * for sense requests (Ryan Bradetich).
69  *
70  * Version 2.6
71  *
72  * Following test of the 64 bit parisc kernel by Richard Hirst,
73  * several problems have now been corrected.  Also adds support for
74  * consistent memory allocation.
75  *
76  * Version 2.5
77  * 
78  * More Compatibility changes for 710 (now actually works).  Enhanced
79  * support for odd clock speeds which constrain SDTR negotiations.
80  * correct cacheline separation for scsi messages and status for
81  * incoherent architectures.  Use of the pci mapping functions on
82  * buffers to begin support for 64 bit drivers.
83  *
84  * Version 2.4
85  *
86  * Added support for the 53c710 chip (in 53c700 emulation mode only---no 
87  * special 53c710 instructions or registers are used).
88  *
89  * Version 2.3
90  *
91  * More endianness/cache coherency changes.
92  *
93  * Better bad device handling (handles devices lying about tag
94  * queueing support and devices which fail to provide sense data on
95  * contingent allegiance conditions)
96  *
97  * Many thanks to Richard Hirst <rhirst@linuxcare.com> for patiently
98  * debugging this driver on the parisc architecture and suggesting
99  * many improvements and bug fixes.
100  *
101  * Thanks also go to Linuxcare Inc. for providing several PARISC
102  * machines for me to debug the driver on.
103  *
104  * Version 2.2
105  *
106  * Made the driver mem or io mapped; added endian invariance; added
107  * dma cache flushing operations for architectures which need it;
108  * added support for more varied clocking speeds.
109  *
110  * Version 2.1
111  *
112  * Initial modularisation from the D700.  See NCR_D700.c for the rest of
113  * the changelog.
114  * */
115 #define NCR_700_VERSION "2.8"
116
117 #include <linux/config.h>
118 #include <linux/kernel.h>
119 #include <linux/types.h>
120 #include <linux/string.h>
121 #include <linux/ioport.h>
122 #include <linux/delay.h>
123 #include <linux/spinlock.h>
124 #include <linux/completion.h>
125 #include <linux/sched.h>
126 #include <linux/init.h>
127 #include <linux/proc_fs.h>
128 #include <linux/blkdev.h>
129 #include <linux/module.h>
130 #include <linux/interrupt.h>
131 #include <linux/device.h>
132 #include <asm/dma.h>
133 #include <asm/system.h>
134 #include <asm/io.h>
135 #include <asm/pgtable.h>
136 #include <asm/byteorder.h>
137
138 #include <scsi/scsi.h>
139 #include <scsi/scsi_cmnd.h>
140 #include <scsi/scsi_dbg.h>
141 #include <scsi/scsi_eh.h>
142 #include <scsi/scsi_host.h>
143 #include <scsi/scsi_tcq.h>
144 #include <scsi/scsi_transport.h>
145 #include <scsi/scsi_transport_spi.h>
146
147 #include "53c700.h"
148
149 /* NOTE: For 64 bit drivers there are points in the code where we use
150  * a non dereferenceable pointer to point to a structure in dma-able
151  * memory (which is 32 bits) so that we can use all of the structure
152  * operations but take the address at the end.  This macro allows us
153  * to truncate the 64 bit pointer down to 32 bits without the compiler
154  * complaining */
155 #define to32bit(x)      ((__u32)((unsigned long)(x)))
156
157 #ifdef NCR_700_DEBUG
158 #define STATIC
159 #else
160 #define STATIC static
161 #endif
162
163 MODULE_AUTHOR("James Bottomley");
164 MODULE_DESCRIPTION("53c700 and 53c700-66 Driver");
165 MODULE_LICENSE("GPL");
166
167 /* This is the script */
168 #include "53c700_d.h"
169
170
171 STATIC int NCR_700_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
172 STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
173 STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
174 STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
175 STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
176 STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
177 STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
178 STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
179 static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
180 static int NCR_700_change_queue_type(struct scsi_device *SDpnt, int depth);
181
182 STATIC struct device_attribute *NCR_700_dev_attrs[];
183
184 STATIC struct scsi_transport_template *NCR_700_transport_template = NULL;
185
186 struct NCR_700_sense {
187         unsigned char cmnd[MAX_COMMAND_SIZE];
188 };
189
190 static char *NCR_700_phase[] = {
191         "",
192         "after selection",
193         "before command phase",
194         "after command phase",
195         "after status phase",
196         "after data in phase",
197         "after data out phase",
198         "during data phase",
199 };
200
201 static char *NCR_700_condition[] = {
202         "",
203         "NOT MSG_OUT",
204         "UNEXPECTED PHASE",
205         "NOT MSG_IN",
206         "UNEXPECTED MSG",
207         "MSG_IN",
208         "SDTR_MSG RECEIVED",
209         "REJECT_MSG RECEIVED",
210         "DISCONNECT_MSG RECEIVED",
211         "MSG_OUT",
212         "DATA_IN",
213         
214 };
215
216 static char *NCR_700_fatal_messages[] = {
217         "unexpected message after reselection",
218         "still MSG_OUT after message injection",
219         "not MSG_IN after selection",
220         "Illegal message length received",
221 };
222
223 static char *NCR_700_SBCL_bits[] = {
224         "IO ",
225         "CD ",
226         "MSG ",
227         "ATN ",
228         "SEL ",
229         "BSY ",
230         "ACK ",
231         "REQ ",
232 };
233
234 static char *NCR_700_SBCL_to_phase[] = {
235         "DATA_OUT",
236         "DATA_IN",
237         "CMD_OUT",
238         "STATE",
239         "ILLEGAL PHASE",
240         "ILLEGAL PHASE",
241         "MSG OUT",
242         "MSG IN",
243 };
244
245 /* This translates the SDTR message offset and period to a value
246  * which can be loaded into the SXFER_REG.
247  *
248  * NOTE: According to SCSI-2, the true transfer period (in ns) is
249  *       actually four times this period value */
250 static inline __u8
251 NCR_700_offset_period_to_sxfer(struct NCR_700_Host_Parameters *hostdata,
252                                __u8 offset, __u8 period)
253 {
254         int XFERP;
255
256         __u8 min_xferp = (hostdata->chip710
257                           ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
258         __u8 max_offset = (hostdata->chip710
259                            ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET);
260
261         if(offset == 0)
262                 return 0;
263
264         if(period < hostdata->min_period) {
265                 printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_MIN_PERIOD*4);
266                 period = hostdata->min_period;
267         }
268         XFERP = (period*4 * hostdata->sync_clock)/1000 - 4;
269         if(offset > max_offset) {
270                 printk(KERN_WARNING "53c700: Offset %d exceeds chip maximum, setting to %d\n",
271                        offset, max_offset);
272                 offset = max_offset;
273         }
274         if(XFERP < min_xferp) {
275                 printk(KERN_WARNING "53c700: XFERP %d is less than minium, setting to %d\n",
276                        XFERP,  min_xferp);
277                 XFERP =  min_xferp;
278         }
279         return (offset & 0x0f) | (XFERP & 0x07)<<4;
280 }
281
282 static inline __u8
283 NCR_700_get_SXFER(struct scsi_device *SDp)
284 {
285         struct NCR_700_Host_Parameters *hostdata = 
286                 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
287
288         return NCR_700_offset_period_to_sxfer(hostdata,
289                                               spi_offset(SDp->sdev_target),
290                                               spi_period(SDp->sdev_target));
291 }
292
293 struct Scsi_Host *
294 NCR_700_detect(struct scsi_host_template *tpnt,
295                struct NCR_700_Host_Parameters *hostdata, struct device *dev)
296 {
297         dma_addr_t pScript, pSlots;
298         __u8 *memory;
299         __u32 *script;
300         struct Scsi_Host *host;
301         static int banner = 0;
302         int j;
303
304         if(tpnt->sdev_attrs == NULL)
305                 tpnt->sdev_attrs = NCR_700_dev_attrs;
306
307         memory = dma_alloc_noncoherent(hostdata->dev, TOTAL_MEM_SIZE,
308                                        &pScript, GFP_KERNEL);
309         if(memory == NULL) {
310                 printk(KERN_ERR "53c700: Failed to allocate memory for driver, detatching\n");
311                 return NULL;
312         }
313
314         script = (__u32 *)memory;
315         hostdata->msgin = memory + MSGIN_OFFSET;
316         hostdata->msgout = memory + MSGOUT_OFFSET;
317         hostdata->status = memory + STATUS_OFFSET;
318         /* all of these offsets are L1_CACHE_BYTES separated.  It is fatal
319          * if this isn't sufficient separation to avoid dma flushing issues */
320         BUG_ON(!dma_is_consistent(pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());
321         hostdata->slots = (struct NCR_700_command_slot *)(memory + SLOTS_OFFSET);
322         hostdata->dev = dev;
323
324         pSlots = pScript + SLOTS_OFFSET;
325
326         /* Fill in the missing routines from the host template */
327         tpnt->queuecommand = NCR_700_queuecommand;
328         tpnt->eh_abort_handler = NCR_700_abort;
329         tpnt->eh_bus_reset_handler = NCR_700_bus_reset;
330         tpnt->eh_host_reset_handler = NCR_700_host_reset;
331         tpnt->can_queue = NCR_700_COMMAND_SLOTS_PER_HOST;
332         tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
333         tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN;
334         tpnt->use_clustering = ENABLE_CLUSTERING;
335         tpnt->slave_configure = NCR_700_slave_configure;
336         tpnt->slave_destroy = NCR_700_slave_destroy;
337         tpnt->change_queue_depth = NCR_700_change_queue_depth;
338         tpnt->change_queue_type = NCR_700_change_queue_type;
339
340         if(tpnt->name == NULL)
341                 tpnt->name = "53c700";
342         if(tpnt->proc_name == NULL)
343                 tpnt->proc_name = "53c700";
344
345         host = scsi_host_alloc(tpnt, 4);
346         if (!host)
347                 return NULL;
348         memset(hostdata->slots, 0, sizeof(struct NCR_700_command_slot)
349                * NCR_700_COMMAND_SLOTS_PER_HOST);
350         for (j = 0; j < NCR_700_COMMAND_SLOTS_PER_HOST; j++) {
351                 dma_addr_t offset = (dma_addr_t)((unsigned long)&hostdata->slots[j].SG[0]
352                                           - (unsigned long)&hostdata->slots[0].SG[0]);
353                 hostdata->slots[j].pSG = (struct NCR_700_SG_List *)((unsigned long)(pSlots + offset));
354                 if(j == 0)
355                         hostdata->free_list = &hostdata->slots[j];
356                 else
357                         hostdata->slots[j-1].ITL_forw = &hostdata->slots[j];
358                 hostdata->slots[j].state = NCR_700_SLOT_FREE;
359         }
360
361         for (j = 0; j < ARRAY_SIZE(SCRIPT); j++)
362                 script[j] = bS_to_host(SCRIPT[j]);
363
364         /* adjust all labels to be bus physical */
365         for (j = 0; j < PATCHES; j++)
366                 script[LABELPATCHES[j]] = bS_to_host(pScript + SCRIPT[LABELPATCHES[j]]);
367         /* now patch up fixed addresses. */
368         script_patch_32(script, MessageLocation,
369                         pScript + MSGOUT_OFFSET);
370         script_patch_32(script, StatusAddress,
371                         pScript + STATUS_OFFSET);
372         script_patch_32(script, ReceiveMsgAddress,
373                         pScript + MSGIN_OFFSET);
374
375         hostdata->script = script;
376         hostdata->pScript = pScript;
377         dma_sync_single_for_device(hostdata->dev, pScript, sizeof(SCRIPT), DMA_TO_DEVICE);
378         hostdata->state = NCR_700_HOST_FREE;
379         hostdata->cmd = NULL;
380         host->max_id = 8;
381         host->max_lun = NCR_700_MAX_LUNS;
382         BUG_ON(NCR_700_transport_template == NULL);
383         host->transportt = NCR_700_transport_template;
384         host->unique_id = (unsigned long)hostdata->base;
385         hostdata->eh_complete = NULL;
386         host->hostdata[0] = (unsigned long)hostdata;
387         /* kick the chip */
388         NCR_700_writeb(0xff, host, CTEST9_REG);
389         if (hostdata->chip710)
390                 hostdata->rev = (NCR_700_readb(host, CTEST8_REG)>>4) & 0x0f;
391         else
392                 hostdata->rev = (NCR_700_readb(host, CTEST7_REG)>>4) & 0x0f;
393         hostdata->fast = (NCR_700_readb(host, CTEST9_REG) == 0);
394         if (banner == 0) {
395                 printk(KERN_NOTICE "53c700: Version " NCR_700_VERSION " By James.Bottomley@HansenPartnership.com\n");
396                 banner = 1;
397         }
398         printk(KERN_NOTICE "scsi%d: %s rev %d %s\n", host->host_no,
399                hostdata->chip710 ? "53c710" :
400                (hostdata->fast ? "53c700-66" : "53c700"),
401                hostdata->rev, hostdata->differential ?
402                "(Differential)" : "");
403         /* reset the chip */
404         NCR_700_chip_reset(host);
405
406         if (scsi_add_host(host, dev)) {
407                 dev_printk(KERN_ERR, dev, "53c700: scsi_add_host failed\n");
408                 scsi_host_put(host);
409                 return NULL;
410         }
411
412         spi_signalling(host) = hostdata->differential ? SPI_SIGNAL_HVD :
413                 SPI_SIGNAL_SE;
414
415         return host;
416 }
417
418 int
419 NCR_700_release(struct Scsi_Host *host)
420 {
421         struct NCR_700_Host_Parameters *hostdata = 
422                 (struct NCR_700_Host_Parameters *)host->hostdata[0];
423
424         dma_free_noncoherent(hostdata->dev, TOTAL_MEM_SIZE,
425                                hostdata->script, hostdata->pScript);
426         return 1;
427 }
428
429 static inline __u8
430 NCR_700_identify(int can_disconnect, __u8 lun)
431 {
432         return IDENTIFY_BASE |
433                 ((can_disconnect) ? 0x40 : 0) |
434                 (lun & NCR_700_LUN_MASK);
435 }
436
437 /*
438  * Function : static int data_residual (Scsi_Host *host)
439  *
440  * Purpose : return residual data count of what's in the chip.  If you
441  * really want to know what this function is doing, it's almost a
442  * direct transcription of the algorithm described in the 53c710
443  * guide, except that the DBC and DFIFO registers are only 6 bits
444  * wide on a 53c700.
445  *
446  * Inputs : host - SCSI host */
447 static inline int
448 NCR_700_data_residual (struct Scsi_Host *host) {
449         struct NCR_700_Host_Parameters *hostdata = 
450                 (struct NCR_700_Host_Parameters *)host->hostdata[0];
451         int count, synchronous = 0;
452         unsigned int ddir;
453
454         if(hostdata->chip710) {
455                 count = ((NCR_700_readb(host, DFIFO_REG) & 0x7f) -
456                          (NCR_700_readl(host, DBC_REG) & 0x7f)) & 0x7f;
457         } else {
458                 count = ((NCR_700_readb(host, DFIFO_REG) & 0x3f) -
459                          (NCR_700_readl(host, DBC_REG) & 0x3f)) & 0x3f;
460         }
461         
462         if(hostdata->fast)
463                 synchronous = NCR_700_readb(host, SXFER_REG) & 0x0f;
464         
465         /* get the data direction */
466         ddir = NCR_700_readb(host, CTEST0_REG) & 0x01;
467
468         if (ddir) {
469                 /* Receive */
470                 if (synchronous) 
471                         count += (NCR_700_readb(host, SSTAT2_REG) & 0xf0) >> 4;
472                 else
473                         if (NCR_700_readb(host, SSTAT1_REG) & SIDL_REG_FULL)
474                                 ++count;
475         } else {
476                 /* Send */
477                 __u8 sstat = NCR_700_readb(host, SSTAT1_REG);
478                 if (sstat & SODL_REG_FULL)
479                         ++count;
480                 if (synchronous && (sstat & SODR_REG_FULL))
481                         ++count;
482         }
483 #ifdef NCR_700_DEBUG
484         if(count)
485                 printk("RESIDUAL IS %d (ddir %d)\n", count, ddir);
486 #endif
487         return count;
488 }
489
490 /* print out the SCSI wires and corresponding phase from the SBCL register
491  * in the chip */
492 static inline char *
493 sbcl_to_string(__u8 sbcl)
494 {
495         int i;
496         static char ret[256];
497
498         ret[0]='\0';
499         for(i=0; i<8; i++) {
500                 if((1<<i) & sbcl) 
501                         strcat(ret, NCR_700_SBCL_bits[i]);
502         }
503         strcat(ret, NCR_700_SBCL_to_phase[sbcl & 0x07]);
504         return ret;
505 }
506
507 static inline __u8
508 bitmap_to_number(__u8 bitmap)
509 {
510         __u8 i;
511
512         for(i=0; i<8 && !(bitmap &(1<<i)); i++)
513                 ;
514         return i;
515 }
516
517 /* Pull a slot off the free list */
518 STATIC struct NCR_700_command_slot *
519 find_empty_slot(struct NCR_700_Host_Parameters *hostdata)
520 {
521         struct NCR_700_command_slot *slot = hostdata->free_list;
522
523         if(slot == NULL) {
524                 /* sanity check */
525                 if(hostdata->command_slot_count != NCR_700_COMMAND_SLOTS_PER_HOST)
526                         printk(KERN_ERR "SLOTS FULL, but count is %d, should be %d\n", hostdata->command_slot_count, NCR_700_COMMAND_SLOTS_PER_HOST);
527                 return NULL;
528         }
529
530         if(slot->state != NCR_700_SLOT_FREE)
531                 /* should panic! */
532                 printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n");
533                 
534
535         hostdata->free_list = slot->ITL_forw;
536         slot->ITL_forw = NULL;
537
538
539         /* NOTE: set the state to busy here, not queued, since this
540          * indicates the slot is in use and cannot be run by the IRQ
541          * finish routine.  If we cannot queue the command when it
542          * is properly build, we then change to NCR_700_SLOT_QUEUED */
543         slot->state = NCR_700_SLOT_BUSY;
544         slot->flags = 0;
545         hostdata->command_slot_count++;
546         
547         return slot;
548 }
549
550 STATIC void 
551 free_slot(struct NCR_700_command_slot *slot,
552           struct NCR_700_Host_Parameters *hostdata)
553 {
554         if((slot->state & NCR_700_SLOT_MASK) != NCR_700_SLOT_MAGIC) {
555                 printk(KERN_ERR "53c700: SLOT %p is not MAGIC!!!\n", slot);
556         }
557         if(slot->state == NCR_700_SLOT_FREE) {
558                 printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot);
559         }
560         
561         slot->resume_offset = 0;
562         slot->cmnd = NULL;
563         slot->state = NCR_700_SLOT_FREE;
564         slot->ITL_forw = hostdata->free_list;
565         hostdata->free_list = slot;
566         hostdata->command_slot_count--;
567 }
568
569
570 /* This routine really does very little.  The command is indexed on
571    the ITL and (if tagged) the ITLQ lists in _queuecommand */
572 STATIC void
573 save_for_reselection(struct NCR_700_Host_Parameters *hostdata,
574                      struct scsi_cmnd *SCp, __u32 dsp)
575 {
576         /* Its just possible that this gets executed twice */
577         if(SCp != NULL) {
578                 struct NCR_700_command_slot *slot =
579                         (struct NCR_700_command_slot *)SCp->host_scribble;
580
581                 slot->resume_offset = dsp;
582         }
583         hostdata->state = NCR_700_HOST_FREE;
584         hostdata->cmd = NULL;
585 }
586
587 STATIC inline void
588 NCR_700_unmap(struct NCR_700_Host_Parameters *hostdata, struct scsi_cmnd *SCp,
589               struct NCR_700_command_slot *slot)
590 {
591         if(SCp->sc_data_direction != DMA_NONE &&
592            SCp->sc_data_direction != DMA_BIDIRECTIONAL) {
593                 if(SCp->use_sg) {
594                         dma_unmap_sg(hostdata->dev, SCp->request_buffer,
595                                      SCp->use_sg, SCp->sc_data_direction);
596                 } else {
597                         dma_unmap_single(hostdata->dev, slot->dma_handle,
598                                          SCp->request_bufflen,
599                                          SCp->sc_data_direction);
600                 }
601         }
602 }
603
604 STATIC inline void
605 NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
606                struct scsi_cmnd *SCp, int result)
607 {
608         hostdata->state = NCR_700_HOST_FREE;
609         hostdata->cmd = NULL;
610
611         if(SCp != NULL) {
612                 struct NCR_700_command_slot *slot = 
613                         (struct NCR_700_command_slot *)SCp->host_scribble;
614                 
615                 NCR_700_unmap(hostdata, SCp, slot);
616                 if (slot->flags == NCR_700_FLAG_AUTOSENSE) {
617                         struct NCR_700_sense *sense = SCp->device->hostdata;
618 #ifdef NCR_700_DEBUG
619                         printk(" ORIGINAL CMD %p RETURNED %d, new return is %d sense is\n",
620                                SCp, SCp->cmnd[7], result);
621                         scsi_print_sense("53c700", SCp);
622
623 #endif
624                         dma_unmap_single(hostdata->dev, slot->dma_handle, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
625                         /* restore the old result if the request sense was
626                          * successful */
627                         if(result == 0)
628                                 result = sense->cmnd[7];
629                 } else
630                         dma_unmap_single(hostdata->dev, slot->pCmd,
631                                          sizeof(SCp->cmnd), DMA_TO_DEVICE);
632
633                 free_slot(slot, hostdata);
634 #ifdef NCR_700_DEBUG
635                 if(NCR_700_get_depth(SCp->device) == 0 ||
636                    NCR_700_get_depth(SCp->device) > SCp->device->queue_depth)
637                         printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n",
638                                NCR_700_get_depth(SCp->device));
639 #endif /* NCR_700_DEBUG */
640                 NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) - 1);
641
642                 SCp->host_scribble = NULL;
643                 SCp->result = result;
644                 SCp->scsi_done(SCp);
645         } else {
646                 printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n");
647         }
648 }
649
650
651 STATIC void
652 NCR_700_internal_bus_reset(struct Scsi_Host *host)
653 {
654         /* Bus reset */
655         NCR_700_writeb(ASSERT_RST, host, SCNTL1_REG);
656         udelay(50);
657         NCR_700_writeb(0, host, SCNTL1_REG);
658
659 }
660
661 STATIC void
662 NCR_700_chip_setup(struct Scsi_Host *host)
663 {
664         struct NCR_700_Host_Parameters *hostdata = 
665                 (struct NCR_700_Host_Parameters *)host->hostdata[0];
666         __u32 dcntl_extra = 0;
667         __u8 min_period;
668         __u8 min_xferp = (hostdata->chip710 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
669
670         if(hostdata->chip710) {
671                 __u8 burst_disable = hostdata->burst_disable
672                         ? BURST_DISABLE : 0;
673                 dcntl_extra = COMPAT_700_MODE;
674
675                 NCR_700_writeb(dcntl_extra, host, DCNTL_REG);
676                 NCR_700_writeb(BURST_LENGTH_8  | hostdata->dmode_extra,
677                                host, DMODE_710_REG);
678                 NCR_700_writeb(burst_disable | (hostdata->differential ? 
679                                                 DIFF : 0), host, CTEST7_REG);
680                 NCR_700_writeb(BTB_TIMER_DISABLE, host, CTEST0_REG);
681                 NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY | PARITY
682                                | AUTO_ATN, host, SCNTL0_REG);
683         } else {
684                 NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra,
685                                host, DMODE_700_REG);
686                 NCR_700_writeb(hostdata->differential ? 
687                                DIFF : 0, host, CTEST7_REG);
688                 if(hostdata->fast) {
689                         /* this is for 700-66, does nothing on 700 */
690                         NCR_700_writeb(LAST_DIS_ENBL | ENABLE_ACTIVE_NEGATION 
691                                        | GENERATE_RECEIVE_PARITY, host,
692                                        CTEST8_REG);
693                 } else {
694                         NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY
695                                        | PARITY | AUTO_ATN, host, SCNTL0_REG);
696                 }
697         }
698
699         NCR_700_writeb(1 << host->this_id, host, SCID_REG);
700         NCR_700_writeb(0, host, SBCL_REG);
701         NCR_700_writeb(ASYNC_OPERATION, host, SXFER_REG);
702
703         NCR_700_writeb(PHASE_MM_INT | SEL_TIMEOUT_INT | GROSS_ERR_INT | UX_DISC_INT
704              | RST_INT | PAR_ERR_INT | SELECT_INT, host, SIEN_REG);
705
706         NCR_700_writeb(ABORT_INT | INT_INST_INT | ILGL_INST_INT, host, DIEN_REG);
707         NCR_700_writeb(ENABLE_SELECT, host, SCNTL1_REG);
708         if(hostdata->clock > 75) {
709                 printk(KERN_ERR "53c700: Clock speed %dMHz is too high: 75Mhz is the maximum this chip can be driven at\n", hostdata->clock);
710                 /* do the best we can, but the async clock will be out
711                  * of spec: sync divider 2, async divider 3 */
712                 DEBUG(("53c700: sync 2 async 3\n"));
713                 NCR_700_writeb(SYNC_DIV_2_0, host, SBCL_REG);
714                 NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
715                 hostdata->sync_clock = hostdata->clock/2;
716         } else  if(hostdata->clock > 50  && hostdata->clock <= 75) {
717                 /* sync divider 1.5, async divider 3 */
718                 DEBUG(("53c700: sync 1.5 async 3\n"));
719                 NCR_700_writeb(SYNC_DIV_1_5, host, SBCL_REG);
720                 NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
721                 hostdata->sync_clock = hostdata->clock*2;
722                 hostdata->sync_clock /= 3;
723                 
724         } else if(hostdata->clock > 37 && hostdata->clock <= 50) {
725                 /* sync divider 1, async divider 2 */
726                 DEBUG(("53c700: sync 1 async 2\n"));
727                 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
728                 NCR_700_writeb(ASYNC_DIV_2_0 | dcntl_extra, host, DCNTL_REG);
729                 hostdata->sync_clock = hostdata->clock;
730         } else if(hostdata->clock > 25 && hostdata->clock <=37) {
731                 /* sync divider 1, async divider 1.5 */
732                 DEBUG(("53c700: sync 1 async 1.5\n"));
733                 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
734                 NCR_700_writeb(ASYNC_DIV_1_5 | dcntl_extra, host, DCNTL_REG);
735                 hostdata->sync_clock = hostdata->clock;
736         } else {
737                 DEBUG(("53c700: sync 1 async 1\n"));
738                 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
739                 NCR_700_writeb(ASYNC_DIV_1_0 | dcntl_extra, host, DCNTL_REG);
740                 /* sync divider 1, async divider 1 */
741                 hostdata->sync_clock = hostdata->clock;
742         }
743         /* Calculate the actual minimum period that can be supported
744          * by our synchronous clock speed.  See the 710 manual for
745          * exact details of this calculation which is based on a
746          * setting of the SXFER register */
747         min_period = 1000*(4+min_xferp)/(4*hostdata->sync_clock);
748         hostdata->min_period = NCR_700_MIN_PERIOD;
749         if(min_period > NCR_700_MIN_PERIOD)
750                 hostdata->min_period = min_period;
751 }
752
753 STATIC void
754 NCR_700_chip_reset(struct Scsi_Host *host)
755 {
756         struct NCR_700_Host_Parameters *hostdata = 
757                 (struct NCR_700_Host_Parameters *)host->hostdata[0];
758         if(hostdata->chip710) {
759                 NCR_700_writeb(SOFTWARE_RESET_710, host, ISTAT_REG);
760                 udelay(100);
761
762                 NCR_700_writeb(0, host, ISTAT_REG);
763         } else {
764                 NCR_700_writeb(SOFTWARE_RESET, host, DCNTL_REG);
765                 udelay(100);
766                 
767                 NCR_700_writeb(0, host, DCNTL_REG);
768         }
769
770         mdelay(1000);
771
772         NCR_700_chip_setup(host);
773 }
774
775 /* The heart of the message processing engine is that the instruction
776  * immediately after the INT is the normal case (and so must be CLEAR
777  * ACK).  If we want to do something else, we call that routine in
778  * scripts and set temp to be the normal case + 8 (skipping the CLEAR
779  * ACK) so that the routine returns correctly to resume its activity
780  * */
781 STATIC __u32
782 process_extended_message(struct Scsi_Host *host, 
783                          struct NCR_700_Host_Parameters *hostdata,
784                          struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps)
785 {
786         __u32 resume_offset = dsp, temp = dsp + 8;
787         __u8 pun = 0xff, lun = 0xff;
788
789         if(SCp != NULL) {
790                 pun = SCp->device->id;
791                 lun = SCp->device->lun;
792         }
793
794         switch(hostdata->msgin[2]) {
795         case A_SDTR_MSG:
796                 if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) {
797                         struct scsi_target *starget = SCp->device->sdev_target;
798                         __u8 period = hostdata->msgin[3];
799                         __u8 offset = hostdata->msgin[4];
800
801                         if(offset == 0 || period == 0) {
802                                 offset = 0;
803                                 period = 0;
804                         }
805
806                         spi_offset(starget) = offset;
807                         spi_period(starget) = period;
808                         
809                         if(NCR_700_is_flag_set(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION)) {
810                                 spi_display_xfer_agreement(starget);
811                                 NCR_700_clear_flag(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION);
812                         }
813                         
814                         NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
815                         NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
816                         
817                         NCR_700_writeb(NCR_700_get_SXFER(SCp->device),
818                                        host, SXFER_REG);
819
820                 } else {
821                         /* SDTR message out of the blue, reject it */
822                         shost_printk(KERN_WARNING, host,
823                                 "Unexpected SDTR msg\n");
824                         hostdata->msgout[0] = A_REJECT_MSG;
825                         dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
826                         script_patch_16(hostdata->script, MessageCount, 1);
827                         /* SendMsgOut returns, so set up the return
828                          * address */
829                         resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
830                 }
831                 break;
832         
833         case A_WDTR_MSG:
834                 printk(KERN_INFO "scsi%d: (%d:%d), Unsolicited WDTR after CMD, Rejecting\n",
835                        host->host_no, pun, lun);
836                 hostdata->msgout[0] = A_REJECT_MSG;
837                 dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
838                 script_patch_16(hostdata->script, MessageCount, 1);
839                 resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
840
841                 break;
842
843         default:
844                 printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
845                        host->host_no, pun, lun,
846                        NCR_700_phase[(dsps & 0xf00) >> 8]);
847                 spi_print_msg(hostdata->msgin);
848                 printk("\n");
849                 /* just reject it */
850                 hostdata->msgout[0] = A_REJECT_MSG;
851                 dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
852                 script_patch_16(hostdata->script, MessageCount, 1);
853                 /* SendMsgOut returns, so set up the return
854                  * address */
855                 resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
856         }
857         NCR_700_writel(temp, host, TEMP_REG);
858         return resume_offset;
859 }
860
861 STATIC __u32
862 process_message(struct Scsi_Host *host, struct NCR_700_Host_Parameters *hostdata,
863                 struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps)
864 {
865         /* work out where to return to */
866         __u32 temp = dsp + 8, resume_offset = dsp;
867         __u8 pun = 0xff, lun = 0xff;
868
869         if(SCp != NULL) {
870                 pun = SCp->device->id;
871                 lun = SCp->device->lun;
872         }
873
874 #ifdef NCR_700_DEBUG
875         printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun,
876                NCR_700_phase[(dsps & 0xf00) >> 8]);
877         spi_print_msg(hostdata->msgin);
878         printk("\n");
879 #endif
880
881         switch(hostdata->msgin[0]) {
882
883         case A_EXTENDED_MSG:
884                 resume_offset =  process_extended_message(host, hostdata, SCp,
885                                                           dsp, dsps);
886                 break;
887
888         case A_REJECT_MSG:
889                 if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) {
890                         /* Rejected our sync negotiation attempt */
891                         spi_period(SCp->device->sdev_target) =
892                                 spi_offset(SCp->device->sdev_target) = 0;
893                         NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
894                         NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
895                 } else if(SCp != NULL && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION) {
896                         /* rejected our first simple tag message */
897                         scmd_printk(KERN_WARNING, SCp,
898                                 "Rejected first tag queue attempt, turning off tag queueing\n");
899                         /* we're done negotiating */
900                         NCR_700_set_tag_neg_state(SCp->device, NCR_700_FINISHED_TAG_NEGOTIATION);
901                         hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
902                         SCp->device->tagged_supported = 0;
903                         scsi_deactivate_tcq(SCp->device, host->cmd_per_lun);
904                 } else {
905                         shost_printk(KERN_WARNING, host,
906                                 "(%d:%d) Unexpected REJECT Message %s\n",
907                                pun, lun,
908                                NCR_700_phase[(dsps & 0xf00) >> 8]);
909                         /* however, just ignore it */
910                 }
911                 break;
912
913         case A_PARITY_ERROR_MSG:
914                 printk(KERN_ERR "scsi%d (%d:%d) Parity Error!\n", host->host_no,
915                        pun, lun);
916                 NCR_700_internal_bus_reset(host);
917                 break;
918         case A_SIMPLE_TAG_MSG:
919                 printk(KERN_INFO "scsi%d (%d:%d) SIMPLE TAG %d %s\n", host->host_no,
920                        pun, lun, hostdata->msgin[1],
921                        NCR_700_phase[(dsps & 0xf00) >> 8]);
922                 /* just ignore it */
923                 break;
924         default:
925                 printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
926                        host->host_no, pun, lun,
927                        NCR_700_phase[(dsps & 0xf00) >> 8]);
928
929                 spi_print_msg(hostdata->msgin);
930                 printk("\n");
931                 /* just reject it */
932                 hostdata->msgout[0] = A_REJECT_MSG;
933                 dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
934                 script_patch_16(hostdata->script, MessageCount, 1);
935                 /* SendMsgOut returns, so set up the return
936                  * address */
937                 resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
938
939                 break;
940         }
941         NCR_700_writel(temp, host, TEMP_REG);
942         /* set us up to receive another message */
943         dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE, DMA_FROM_DEVICE);
944         return resume_offset;
945 }
946
947 STATIC __u32
948 process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
949                          struct Scsi_Host *host,
950                          struct NCR_700_Host_Parameters *hostdata)
951 {
952         __u32 resume_offset = 0;
953         __u8 pun = 0xff, lun=0xff;
954
955         if(SCp != NULL) {
956                 pun = SCp->device->id;
957                 lun = SCp->device->lun;
958         }
959
960         if(dsps == A_GOOD_STATUS_AFTER_STATUS) {
961                 DEBUG(("  COMMAND COMPLETE, status=%02x\n",
962                        hostdata->status[0]));
963                 /* OK, if TCQ still under negotiation, we now know it works */
964                 if (NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION)
965                         NCR_700_set_tag_neg_state(SCp->device,
966                                                   NCR_700_FINISHED_TAG_NEGOTIATION);
967                         
968                 /* check for contingent allegiance contitions */
969                 if(status_byte(hostdata->status[0]) == CHECK_CONDITION ||
970                    status_byte(hostdata->status[0]) == COMMAND_TERMINATED) {
971                         struct NCR_700_command_slot *slot =
972                                 (struct NCR_700_command_slot *)SCp->host_scribble;
973                         if(SCp->cmnd[0] == REQUEST_SENSE) {
974                                 /* OOPS: bad device, returning another
975                                  * contingent allegiance condition */
976                                 scmd_printk(KERN_ERR, SCp,
977                                         "broken device is looping in contingent allegiance: ignoring\n");
978                                 NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]);
979                         } else {
980                                 struct NCR_700_sense *sense = SCp->device->hostdata;
981 #ifdef NCR_DEBUG
982                                 scsi_print_command(SCp);
983                                 printk("  cmd %p has status %d, requesting sense\n",
984                                        SCp, hostdata->status[0]);
985 #endif
986                                 /* we can destroy the command here
987                                  * because the contingent allegiance
988                                  * condition will cause a retry which
989                                  * will re-copy the command from the
990                                  * saved data_cmnd.  We also unmap any
991                                  * data associated with the command
992                                  * here */
993                                 NCR_700_unmap(hostdata, SCp, slot);
994                                 dma_unmap_single(hostdata->dev, slot->pCmd,
995                                                  sizeof(SCp->cmnd),
996                                                  DMA_TO_DEVICE);
997
998                                 sense->cmnd[0] = REQUEST_SENSE;
999                                 sense->cmnd[1] = (SCp->device->lun & 0x7) << 5;
1000                                 sense->cmnd[2] = 0;
1001                                 sense->cmnd[3] = 0;
1002                                 sense->cmnd[4] = sizeof(SCp->sense_buffer);
1003                                 sense->cmnd[5] = 0;
1004                                 /* Here's a quiet hack: the
1005                                  * REQUEST_SENSE command is six bytes,
1006                                  * so store a flag indicating that
1007                                  * this was an internal sense request
1008                                  * and the original status at the end
1009                                  * of the command */
1010                                 sense->cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC;
1011                                 sense->cmnd[7] = hostdata->status[0];
1012                                 slot->pCmd = dma_map_single(hostdata->dev, sense->cmnd, sizeof(sense->cmnd), DMA_TO_DEVICE);
1013                                 slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
1014                                 slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer));
1015                                 slot->SG[0].pAddr = bS_to_host(slot->dma_handle);
1016                                 slot->SG[1].ins = bS_to_host(SCRIPT_RETURN);
1017                                 slot->SG[1].pAddr = 0;
1018                                 slot->resume_offset = hostdata->pScript;
1019                                 dma_cache_sync(slot->SG, sizeof(slot->SG[0])*2, DMA_TO_DEVICE);
1020                                 dma_cache_sync(SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
1021                                 
1022                                 /* queue the command for reissue */
1023                                 slot->state = NCR_700_SLOT_QUEUED;
1024                                 slot->flags = NCR_700_FLAG_AUTOSENSE;
1025                                 hostdata->state = NCR_700_HOST_FREE;
1026                                 hostdata->cmd = NULL;
1027                         }
1028                 } else {
1029                         // Currently rely on the mid layer evaluation
1030                         // of the tag queuing capability
1031                         //
1032                         //if(status_byte(hostdata->status[0]) == GOOD &&
1033                         //   SCp->cmnd[0] == INQUIRY && SCp->use_sg == 0) {
1034                         //      /* Piggy back the tag queueing support
1035                         //       * on this command */
1036                         //      dma_sync_single_for_cpu(hostdata->dev,
1037                         //                          slot->dma_handle,
1038                         //                          SCp->request_bufflen,
1039                         //                          DMA_FROM_DEVICE);
1040                         //      if(((char *)SCp->request_buffer)[7] & 0x02) {
1041                         //              scmd_printk(KERN_INFO, SCp,
1042                         //                   "Enabling Tag Command Queuing\n");
1043                         //              hostdata->tag_negotiated |= (1<<scmd_id(SCp));
1044                         //              NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING);
1045                         //      } else {
1046                         //              NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING);
1047                         //              hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
1048                         //      }
1049                         //}
1050                         NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]);
1051                 }
1052         } else if((dsps & 0xfffff0f0) == A_UNEXPECTED_PHASE) {
1053                 __u8 i = (dsps & 0xf00) >> 8;
1054
1055                 scmd_printk(KERN_ERR, SCp, "UNEXPECTED PHASE %s (%s)\n",
1056                        NCR_700_phase[i],
1057                        sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
1058                 scmd_printk(KERN_ERR, SCp, "         len = %d, cmd =",
1059                         SCp->cmd_len);
1060                 scsi_print_command(SCp);
1061
1062                 NCR_700_internal_bus_reset(host);
1063         } else if((dsps & 0xfffff000) == A_FATAL) {
1064                 int i = (dsps & 0xfff);
1065
1066                 printk(KERN_ERR "scsi%d: (%d:%d) FATAL ERROR: %s\n",
1067                        host->host_no, pun, lun, NCR_700_fatal_messages[i]);
1068                 if(dsps == A_FATAL_ILLEGAL_MSG_LENGTH) {
1069                         printk(KERN_ERR "     msg begins %02x %02x\n",
1070                                hostdata->msgin[0], hostdata->msgin[1]);
1071                 }
1072                 NCR_700_internal_bus_reset(host);
1073         } else if((dsps & 0xfffff0f0) == A_DISCONNECT) {
1074 #ifdef NCR_700_DEBUG
1075                 __u8 i = (dsps & 0xf00) >> 8;
1076
1077                 printk("scsi%d: (%d:%d), DISCONNECTED (%d) %s\n",
1078                        host->host_no, pun, lun,
1079                        i, NCR_700_phase[i]);
1080 #endif
1081                 save_for_reselection(hostdata, SCp, dsp);
1082
1083         } else if(dsps == A_RESELECTION_IDENTIFIED) {
1084                 __u8 lun;
1085                 struct NCR_700_command_slot *slot;
1086                 __u8 reselection_id = hostdata->reselection_id;
1087                 struct scsi_device *SDp;
1088
1089                 lun = hostdata->msgin[0] & 0x1f;
1090
1091                 hostdata->reselection_id = 0xff;
1092                 DEBUG(("scsi%d: (%d:%d) RESELECTED!\n",
1093                        host->host_no, reselection_id, lun));
1094                 /* clear the reselection indicator */
1095                 SDp = __scsi_device_lookup(host, 0, reselection_id, lun);
1096                 if(unlikely(SDp == NULL)) {
1097                         printk(KERN_ERR "scsi%d: (%d:%d) HAS NO device\n",
1098                                host->host_no, reselection_id, lun);
1099                         BUG();
1100                 }
1101                 if(hostdata->msgin[1] == A_SIMPLE_TAG_MSG) {
1102                         struct scsi_cmnd *SCp = scsi_find_tag(SDp, hostdata->msgin[2]);
1103                         if(unlikely(SCp == NULL)) {
1104                                 printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n", 
1105                                        host->host_no, reselection_id, lun, hostdata->msgin[2]);
1106                                 BUG();
1107                         }
1108
1109                         slot = (struct NCR_700_command_slot *)SCp->host_scribble;
1110                         DDEBUG(KERN_DEBUG, SDp,
1111                                 "reselection is tag %d, slot %p(%d)\n",
1112                                 hostdata->msgin[2], slot, slot->tag);
1113                 } else {
1114                         struct scsi_cmnd *SCp = scsi_find_tag(SDp, SCSI_NO_TAG);
1115                         if(unlikely(SCp == NULL)) {
1116                                 sdev_printk(KERN_ERR, SDp,
1117                                         "no saved request for untagged cmd\n");
1118                                 BUG();
1119                         }
1120                         slot = (struct NCR_700_command_slot *)SCp->host_scribble;
1121                 }
1122
1123                 if(slot == NULL) {
1124                         printk(KERN_ERR "scsi%d: (%d:%d) RESELECTED but no saved command (MSG = %02x %02x %02x)!!\n",
1125                                host->host_no, reselection_id, lun,
1126                                hostdata->msgin[0], hostdata->msgin[1],
1127                                hostdata->msgin[2]);
1128                 } else {
1129                         if(hostdata->state != NCR_700_HOST_BUSY)
1130                                 printk(KERN_ERR "scsi%d: FATAL, host not busy during valid reselection!\n",
1131                                        host->host_no);
1132                         resume_offset = slot->resume_offset;
1133                         hostdata->cmd = slot->cmnd;
1134
1135                         /* re-patch for this command */
1136                         script_patch_32_abs(hostdata->script, CommandAddress, 
1137                                             slot->pCmd);
1138                         script_patch_16(hostdata->script,
1139                                         CommandCount, slot->cmnd->cmd_len);
1140                         script_patch_32_abs(hostdata->script, SGScriptStartAddress,
1141                                             to32bit(&slot->pSG[0].ins));
1142
1143                         /* Note: setting SXFER only works if we're
1144                          * still in the MESSAGE phase, so it is vital
1145                          * that ACK is still asserted when we process
1146                          * the reselection message.  The resume offset
1147                          * should therefore always clear ACK */
1148                         NCR_700_writeb(NCR_700_get_SXFER(hostdata->cmd->device),
1149                                        host, SXFER_REG);
1150                         dma_cache_sync(hostdata->msgin,
1151                                        MSG_ARRAY_SIZE, DMA_FROM_DEVICE);
1152                         dma_cache_sync(hostdata->msgout,
1153                                        MSG_ARRAY_SIZE, DMA_TO_DEVICE);
1154                         /* I'm just being paranoid here, the command should
1155                          * already have been flushed from the cache */
1156                         dma_cache_sync(slot->cmnd->cmnd,
1157                                        slot->cmnd->cmd_len, DMA_TO_DEVICE);
1158
1159
1160                         
1161                 }
1162         } else if(dsps == A_RESELECTED_DURING_SELECTION) {
1163
1164                 /* This section is full of debugging code because I've
1165                  * never managed to reach it.  I think what happens is
1166                  * that, because the 700 runs with selection
1167                  * interrupts enabled the whole time that we take a
1168                  * selection interrupt before we manage to get to the
1169                  * reselected script interrupt */
1170
1171                 __u8 reselection_id = NCR_700_readb(host, SFBR_REG);
1172                 struct NCR_700_command_slot *slot;
1173                 
1174                 /* Take out our own ID */
1175                 reselection_id &= ~(1<<host->this_id);
1176                 
1177                 /* I've never seen this happen, so keep this as a printk rather
1178                  * than a debug */
1179                 printk(KERN_INFO "scsi%d: (%d:%d) RESELECTION DURING SELECTION, dsp=%08x[%04x] state=%d, count=%d\n",
1180                        host->host_no, reselection_id, lun, dsp, dsp - hostdata->pScript, hostdata->state, hostdata->command_slot_count);
1181
1182                 {
1183                         /* FIXME: DEBUGGING CODE */
1184                         __u32 SG = (__u32)bS_to_cpu(hostdata->script[A_SGScriptStartAddress_used[0]]);
1185                         int i;
1186
1187                         for(i=0; i< NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
1188                                 if(SG >= to32bit(&hostdata->slots[i].pSG[0])
1189                                    && SG <= to32bit(&hostdata->slots[i].pSG[NCR_700_SG_SEGMENTS]))
1190                                         break;
1191                         }
1192                         printk(KERN_INFO "IDENTIFIED SG segment as being %08x in slot %p, cmd %p, slot->resume_offset=%08x\n", SG, &hostdata->slots[i], hostdata->slots[i].cmnd, hostdata->slots[i].resume_offset);
1193                         SCp =  hostdata->slots[i].cmnd;
1194                 }
1195
1196                 if(SCp != NULL) {
1197                         slot = (struct NCR_700_command_slot *)SCp->host_scribble;
1198                         /* change slot from busy to queued to redo command */
1199                         slot->state = NCR_700_SLOT_QUEUED;
1200                 }
1201                 hostdata->cmd = NULL;
1202                 
1203                 if(reselection_id == 0) {
1204                         if(hostdata->reselection_id == 0xff) {
1205                                 printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no);
1206                                 return 0;
1207                         } else {
1208                                 printk(KERN_ERR "scsi%d: script reselected and we took a selection interrupt\n",
1209                                        host->host_no);
1210                                 reselection_id = hostdata->reselection_id;
1211                         }
1212                 } else {
1213                         
1214                         /* convert to real ID */
1215                         reselection_id = bitmap_to_number(reselection_id);
1216                 }
1217                 hostdata->reselection_id = reselection_id;
1218                 /* just in case we have a stale simple tag message, clear it */
1219                 hostdata->msgin[1] = 0;
1220                 dma_cache_sync(hostdata->msgin,
1221                                MSG_ARRAY_SIZE, DMA_BIDIRECTIONAL);
1222                 if(hostdata->tag_negotiated & (1<<reselection_id)) {
1223                         resume_offset = hostdata->pScript + Ent_GetReselectionWithTag;
1224                 } else {
1225                         resume_offset = hostdata->pScript + Ent_GetReselectionData;
1226                 }
1227         } else if(dsps == A_COMPLETED_SELECTION_AS_TARGET) {
1228                 /* we've just disconnected from the bus, do nothing since
1229                  * a return here will re-run the queued command slot
1230                  * that may have been interrupted by the initial selection */
1231                 DEBUG((" SELECTION COMPLETED\n"));
1232         } else if((dsps & 0xfffff0f0) == A_MSG_IN) { 
1233                 resume_offset = process_message(host, hostdata, SCp,
1234                                                 dsp, dsps);
1235         } else if((dsps &  0xfffff000) == 0) {
1236                 __u8 i = (dsps & 0xf0) >> 4, j = (dsps & 0xf00) >> 8;
1237                 printk(KERN_ERR "scsi%d: (%d:%d), unhandled script condition %s %s at %04x\n",
1238                        host->host_no, pun, lun, NCR_700_condition[i],
1239                        NCR_700_phase[j], dsp - hostdata->pScript);
1240                 if(SCp != NULL) {
1241                         scsi_print_command(SCp);
1242
1243                         if(SCp->use_sg) {
1244                                 for(i = 0; i < SCp->use_sg + 1; i++) {
1245                                         printk(KERN_INFO " SG[%d].length = %d, move_insn=%08x, addr %08x\n", i, ((struct scatterlist *)SCp->request_buffer)[i].length, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].ins, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].pAddr);
1246                                 }
1247                         }
1248                 }              
1249                 NCR_700_internal_bus_reset(host);
1250         } else if((dsps & 0xfffff000) == A_DEBUG_INTERRUPT) {
1251                 printk(KERN_NOTICE "scsi%d (%d:%d) DEBUG INTERRUPT %d AT %08x[%04x], continuing\n",
1252                        host->host_no, pun, lun, dsps & 0xfff, dsp, dsp - hostdata->pScript);
1253                 resume_offset = dsp;
1254         } else {
1255                 printk(KERN_ERR "scsi%d: (%d:%d), unidentified script interrupt 0x%x at %04x\n",
1256                        host->host_no, pun, lun, dsps, dsp - hostdata->pScript);
1257                 NCR_700_internal_bus_reset(host);
1258         }
1259         return resume_offset;
1260 }
1261
1262 /* We run the 53c700 with selection interrupts always enabled.  This
1263  * means that the chip may be selected as soon as the bus frees.  On a
1264  * busy bus, this can be before the scripts engine finishes its
1265  * processing.  Therefore, part of the selection processing has to be
1266  * to find out what the scripts engine is doing and complete the
1267  * function if necessary (i.e. process the pending disconnect or save
1268  * the interrupted initial selection */
1269 STATIC inline __u32
1270 process_selection(struct Scsi_Host *host, __u32 dsp)
1271 {
1272         __u8 id = 0;    /* Squash compiler warning */
1273         int count = 0;
1274         __u32 resume_offset = 0;
1275         struct NCR_700_Host_Parameters *hostdata =
1276                 (struct NCR_700_Host_Parameters *)host->hostdata[0];
1277         struct scsi_cmnd *SCp = hostdata->cmd;
1278         __u8 sbcl;
1279
1280         for(count = 0; count < 5; count++) {
1281                 id = NCR_700_readb(host, hostdata->chip710 ?
1282                                    CTEST9_REG : SFBR_REG);
1283
1284                 /* Take out our own ID */
1285                 id &= ~(1<<host->this_id);
1286                 if(id != 0) 
1287                         break;
1288                 udelay(5);
1289         }
1290         sbcl = NCR_700_readb(host, SBCL_REG);
1291         if((sbcl & SBCL_IO) == 0) {
1292                 /* mark as having been selected rather than reselected */
1293                 id = 0xff;
1294         } else {
1295                 /* convert to real ID */
1296                 hostdata->reselection_id = id = bitmap_to_number(id);
1297                 DEBUG(("scsi%d:  Reselected by %d\n",
1298                        host->host_no, id));
1299         }
1300         if(hostdata->state == NCR_700_HOST_BUSY && SCp != NULL) {
1301                 struct NCR_700_command_slot *slot =
1302                         (struct NCR_700_command_slot *)SCp->host_scribble;
1303                 DEBUG(("  ID %d WARNING: RESELECTION OF BUSY HOST, saving cmd %p, slot %p, addr %x [%04x], resume %x!\n", id, hostdata->cmd, slot, dsp, dsp - hostdata->pScript, resume_offset));
1304                 
1305                 switch(dsp - hostdata->pScript) {
1306                 case Ent_Disconnect1:
1307                 case Ent_Disconnect2:
1308                         save_for_reselection(hostdata, SCp, Ent_Disconnect2 + hostdata->pScript);
1309                         break;
1310                 case Ent_Disconnect3:
1311                 case Ent_Disconnect4:
1312                         save_for_reselection(hostdata, SCp, Ent_Disconnect4 + hostdata->pScript);
1313                         break;
1314                 case Ent_Disconnect5:
1315                 case Ent_Disconnect6:
1316                         save_for_reselection(hostdata, SCp, Ent_Disconnect6 + hostdata->pScript);
1317                         break;
1318                 case Ent_Disconnect7:
1319                 case Ent_Disconnect8:
1320                         save_for_reselection(hostdata, SCp, Ent_Disconnect8 + hostdata->pScript);
1321                         break;
1322                 case Ent_Finish1:
1323                 case Ent_Finish2:
1324                         process_script_interrupt(A_GOOD_STATUS_AFTER_STATUS, dsp, SCp, host, hostdata);
1325                         break;
1326                         
1327                 default:
1328                         slot->state = NCR_700_SLOT_QUEUED;
1329                         break;
1330                         }
1331         }
1332         hostdata->state = NCR_700_HOST_BUSY;
1333         hostdata->cmd = NULL;
1334         /* clear any stale simple tag message */
1335         hostdata->msgin[1] = 0;
1336         dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE,
1337                        DMA_BIDIRECTIONAL);
1338
1339         if(id == 0xff) {
1340                 /* Selected as target, Ignore */
1341                 resume_offset = hostdata->pScript + Ent_SelectedAsTarget;
1342         } else if(hostdata->tag_negotiated & (1<<id)) {
1343                 resume_offset = hostdata->pScript + Ent_GetReselectionWithTag;
1344         } else {
1345                 resume_offset = hostdata->pScript + Ent_GetReselectionData;
1346         }
1347         return resume_offset;
1348 }
1349
1350 static inline void
1351 NCR_700_clear_fifo(struct Scsi_Host *host) {
1352         const struct NCR_700_Host_Parameters *hostdata
1353                 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
1354         if(hostdata->chip710) {
1355                 NCR_700_writeb(CLR_FIFO_710, host, CTEST8_REG);
1356         } else {
1357                 NCR_700_writeb(CLR_FIFO, host, DFIFO_REG);
1358         }
1359 }
1360
1361 static inline void
1362 NCR_700_flush_fifo(struct Scsi_Host *host) {
1363         const struct NCR_700_Host_Parameters *hostdata
1364                 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
1365         if(hostdata->chip710) {
1366                 NCR_700_writeb(FLUSH_DMA_FIFO_710, host, CTEST8_REG);
1367                 udelay(10);
1368                 NCR_700_writeb(0, host, CTEST8_REG);
1369         } else {
1370                 NCR_700_writeb(FLUSH_DMA_FIFO, host, DFIFO_REG);
1371                 udelay(10);
1372                 NCR_700_writeb(0, host, DFIFO_REG);
1373         }
1374 }
1375
1376
1377 /* The queue lock with interrupts disabled must be held on entry to
1378  * this function */
1379 STATIC int
1380 NCR_700_start_command(struct scsi_cmnd *SCp)
1381 {
1382         struct NCR_700_command_slot *slot =
1383                 (struct NCR_700_command_slot *)SCp->host_scribble;
1384         struct NCR_700_Host_Parameters *hostdata =
1385                 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
1386         __u16 count = 1;        /* for IDENTIFY message */
1387         
1388         if(hostdata->state != NCR_700_HOST_FREE) {
1389                 /* keep this inside the lock to close the race window where
1390                  * the running command finishes on another CPU while we don't
1391                  * change the state to queued on this one */
1392                 slot->state = NCR_700_SLOT_QUEUED;
1393
1394                 DEBUG(("scsi%d: host busy, queueing command %p, slot %p\n",
1395                        SCp->device->host->host_no, slot->cmnd, slot));
1396                 return 0;
1397         }
1398         hostdata->state = NCR_700_HOST_BUSY;
1399         hostdata->cmd = SCp;
1400         slot->state = NCR_700_SLOT_BUSY;
1401         /* keep interrupts disabled until we have the command correctly
1402          * set up so we cannot take a selection interrupt */
1403
1404         hostdata->msgout[0] = NCR_700_identify((SCp->cmnd[0] != REQUEST_SENSE &&
1405                                                 slot->flags != NCR_700_FLAG_AUTOSENSE),
1406                                                SCp->device->lun);
1407         /* for INQUIRY or REQUEST_SENSE commands, we cannot be sure
1408          * if the negotiated transfer parameters still hold, so
1409          * always renegotiate them */
1410         if(SCp->cmnd[0] == INQUIRY || SCp->cmnd[0] == REQUEST_SENSE ||
1411            slot->flags == NCR_700_FLAG_AUTOSENSE) {
1412                 NCR_700_clear_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
1413         }
1414
1415         /* REQUEST_SENSE is asking for contingent I_T_L(_Q) status.
1416          * If a contingent allegiance condition exists, the device
1417          * will refuse all tags, so send the request sense as untagged
1418          * */
1419         if((hostdata->tag_negotiated & (1<<scmd_id(SCp)))
1420            && (slot->tag != SCSI_NO_TAG && SCp->cmnd[0] != REQUEST_SENSE &&
1421                slot->flags != NCR_700_FLAG_AUTOSENSE)) {
1422                 count += scsi_populate_tag_msg(SCp, &hostdata->msgout[count]);
1423         }
1424
1425         if(hostdata->fast &&
1426            NCR_700_is_flag_clear(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC)) {
1427                 count += spi_populate_sync_msg(&hostdata->msgout[count],
1428                                 spi_period(SCp->device->sdev_target),
1429                                 spi_offset(SCp->device->sdev_target));
1430                 NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
1431         }
1432
1433         script_patch_16(hostdata->script, MessageCount, count);
1434
1435
1436         script_patch_ID(hostdata->script,
1437                         Device_ID, 1<<scmd_id(SCp));
1438
1439         script_patch_32_abs(hostdata->script, CommandAddress, 
1440                             slot->pCmd);
1441         script_patch_16(hostdata->script, CommandCount, SCp->cmd_len);
1442         /* finally plumb the beginning of the SG list into the script
1443          * */
1444         script_patch_32_abs(hostdata->script, SGScriptStartAddress,
1445                             to32bit(&slot->pSG[0].ins));
1446         NCR_700_clear_fifo(SCp->device->host);
1447
1448         if(slot->resume_offset == 0)
1449                 slot->resume_offset = hostdata->pScript;
1450         /* now perform all the writebacks and invalidates */
1451         dma_cache_sync(hostdata->msgout, count, DMA_TO_DEVICE);
1452         dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE,
1453                        DMA_FROM_DEVICE);
1454         dma_cache_sync(SCp->cmnd, SCp->cmd_len, DMA_TO_DEVICE);
1455         dma_cache_sync(hostdata->status, 1, DMA_FROM_DEVICE);
1456
1457         /* set the synchronous period/offset */
1458         NCR_700_writeb(NCR_700_get_SXFER(SCp->device),
1459                        SCp->device->host, SXFER_REG);
1460         NCR_700_writel(slot->temp, SCp->device->host, TEMP_REG);
1461         NCR_700_writel(slot->resume_offset, SCp->device->host, DSP_REG);
1462
1463         return 1;
1464 }
1465
1466 irqreturn_t
1467 NCR_700_intr(int irq, void *dev_id, struct pt_regs *regs)
1468 {
1469         struct Scsi_Host *host = (struct Scsi_Host *)dev_id;
1470         struct NCR_700_Host_Parameters *hostdata =
1471                 (struct NCR_700_Host_Parameters *)host->hostdata[0];
1472         __u8 istat;
1473         __u32 resume_offset = 0;
1474         __u8 pun = 0xff, lun = 0xff;
1475         unsigned long flags;
1476         int handled = 0;
1477
1478         /* Use the host lock to serialise acess to the 53c700
1479          * hardware.  Note: In future, we may need to take the queue
1480          * lock to enter the done routines.  When that happens, we
1481          * need to ensure that for this driver, the host lock and the
1482          * queue lock point to the same thing. */
1483         spin_lock_irqsave(host->host_lock, flags);
1484         if((istat = NCR_700_readb(host, ISTAT_REG))
1485               & (SCSI_INT_PENDING | DMA_INT_PENDING)) {
1486                 __u32 dsps;
1487                 __u8 sstat0 = 0, dstat = 0;
1488                 __u32 dsp;
1489                 struct scsi_cmnd *SCp = hostdata->cmd;
1490                 enum NCR_700_Host_State state;
1491
1492                 handled = 1;
1493                 state = hostdata->state;
1494                 SCp = hostdata->cmd;
1495
1496                 if(istat & SCSI_INT_PENDING) {
1497                         udelay(10);
1498
1499                         sstat0 = NCR_700_readb(host, SSTAT0_REG);
1500                 }
1501
1502                 if(istat & DMA_INT_PENDING) {
1503                         udelay(10);
1504
1505                         dstat = NCR_700_readb(host, DSTAT_REG);
1506                 }
1507
1508                 dsps = NCR_700_readl(host, DSPS_REG);
1509                 dsp = NCR_700_readl(host, DSP_REG);
1510
1511                 DEBUG(("scsi%d: istat %02x sstat0 %02x dstat %02x dsp %04x[%08x] dsps 0x%x\n",
1512                        host->host_no, istat, sstat0, dstat,
1513                        (dsp - (__u32)(hostdata->pScript))/4,
1514                        dsp, dsps));
1515
1516                 if(SCp != NULL) {
1517                         pun = SCp->device->id;
1518                         lun = SCp->device->lun;
1519                 }
1520
1521                 if(sstat0 & SCSI_RESET_DETECTED) {
1522                         struct scsi_device *SDp;
1523                         int i;
1524
1525                         hostdata->state = NCR_700_HOST_BUSY;
1526
1527                         printk(KERN_ERR "scsi%d: Bus Reset detected, executing command %p, slot %p, dsp %08x[%04x]\n",
1528                                host->host_no, SCp, SCp == NULL ? NULL : SCp->host_scribble, dsp, dsp - hostdata->pScript);
1529
1530                         scsi_report_bus_reset(host, 0);
1531
1532                         /* clear all the negotiated parameters */
1533                         __shost_for_each_device(SDp, host)
1534                                 SDp->hostdata = NULL;
1535                         
1536                         /* clear all the slots and their pending commands */
1537                         for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
1538                                 struct scsi_cmnd *SCp;
1539                                 struct NCR_700_command_slot *slot =
1540                                         &hostdata->slots[i];
1541
1542                                 if(slot->state == NCR_700_SLOT_FREE)
1543                                         continue;
1544                                 
1545                                 SCp = slot->cmnd;
1546                                 printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n",
1547                                        slot, SCp);
1548                                 free_slot(slot, hostdata);
1549                                 SCp->host_scribble = NULL;
1550                                 NCR_700_set_depth(SCp->device, 0);
1551                                 /* NOTE: deadlock potential here: we
1552                                  * rely on mid-layer guarantees that
1553                                  * scsi_done won't try to issue the
1554                                  * command again otherwise we'll
1555                                  * deadlock on the
1556                                  * hostdata->state_lock */
1557                                 SCp->result = DID_RESET << 16;
1558                                 SCp->scsi_done(SCp);
1559                         }
1560                         mdelay(25);
1561                         NCR_700_chip_setup(host);
1562
1563                         hostdata->state = NCR_700_HOST_FREE;
1564                         hostdata->cmd = NULL;
1565                         /* signal back if this was an eh induced reset */
1566                         if(hostdata->eh_complete != NULL)
1567                                 complete(hostdata->eh_complete);
1568                         goto out_unlock;
1569                 } else if(sstat0 & SELECTION_TIMEOUT) {
1570                         DEBUG(("scsi%d: (%d:%d) selection timeout\n",
1571                                host->host_no, pun, lun));
1572                         NCR_700_scsi_done(hostdata, SCp, DID_NO_CONNECT<<16);
1573                 } else if(sstat0 & PHASE_MISMATCH) {
1574                         struct NCR_700_command_slot *slot = (SCp == NULL) ? NULL :
1575                                 (struct NCR_700_command_slot *)SCp->host_scribble;
1576
1577                         if(dsp == Ent_SendMessage + 8 + hostdata->pScript) {
1578                                 /* It wants to reply to some part of
1579                                  * our message */
1580 #ifdef NCR_700_DEBUG
1581                                 __u32 temp = NCR_700_readl(host, TEMP_REG);
1582                                 int count = (hostdata->script[Ent_SendMessage/4] & 0xffffff) - ((NCR_700_readl(host, DBC_REG) & 0xffffff) + NCR_700_data_residual(host));
1583                                 printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
1584 #endif
1585                                 resume_offset = hostdata->pScript + Ent_SendMessagePhaseMismatch;
1586                         } else if(dsp >= to32bit(&slot->pSG[0].ins) &&
1587                                   dsp <= to32bit(&slot->pSG[NCR_700_SG_SEGMENTS].ins)) {
1588                                 int data_transfer = NCR_700_readl(host, DBC_REG) & 0xffffff;
1589                                 int SGcount = (dsp - to32bit(&slot->pSG[0].ins))/sizeof(struct NCR_700_SG_List);
1590                                 int residual = NCR_700_data_residual(host);
1591                                 int i;
1592 #ifdef NCR_700_DEBUG
1593                                 __u32 naddr = NCR_700_readl(host, DNAD_REG);
1594
1595                                 printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x\n",
1596                                        host->host_no, pun, lun,
1597                                        SGcount, data_transfer);
1598                                 scsi_print_command(SCp);
1599                                 if(residual) {
1600                                         printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x, residual %d\n",
1601                                        host->host_no, pun, lun,
1602                                        SGcount, data_transfer, residual);
1603                                 }
1604 #endif
1605                                 data_transfer += residual;
1606
1607                                 if(data_transfer != 0) {
1608                                         int count; 
1609                                         __u32 pAddr;
1610
1611                                         SGcount--;
1612
1613                                         count = (bS_to_cpu(slot->SG[SGcount].ins) & 0x00ffffff);
1614                                         DEBUG(("DATA TRANSFER MISMATCH, count = %d, transferred %d\n", count, count-data_transfer));
1615                                         slot->SG[SGcount].ins &= bS_to_host(0xff000000);
1616                                         slot->SG[SGcount].ins |= bS_to_host(data_transfer);
1617                                         pAddr = bS_to_cpu(slot->SG[SGcount].pAddr);
1618                                         pAddr += (count - data_transfer);
1619 #ifdef NCR_700_DEBUG
1620                                         if(pAddr != naddr) {
1621                                                 printk("scsi%d (%d:%d) transfer mismatch pAddr=%lx, naddr=%lx, data_transfer=%d, residual=%d\n", host->host_no, pun, lun, (unsigned long)pAddr, (unsigned long)naddr, data_transfer, residual);
1622                                         }
1623 #endif
1624                                         slot->SG[SGcount].pAddr = bS_to_host(pAddr);
1625                                 }
1626                                 /* set the executed moves to nops */
1627                                 for(i=0; i<SGcount; i++) {
1628                                         slot->SG[i].ins = bS_to_host(SCRIPT_NOP);
1629                                         slot->SG[i].pAddr = 0;
1630                                 }
1631                                 dma_cache_sync(slot->SG, sizeof(slot->SG), DMA_TO_DEVICE);
1632                                 /* and pretend we disconnected after
1633                                  * the command phase */
1634                                 resume_offset = hostdata->pScript + Ent_MsgInDuringData;
1635                                 /* make sure all the data is flushed */
1636                                 NCR_700_flush_fifo(host);
1637                         } else {
1638                                 __u8 sbcl = NCR_700_readb(host, SBCL_REG);
1639                                 printk(KERN_ERR "scsi%d: (%d:%d) phase mismatch at %04x, phase %s\n",
1640                                        host->host_no, pun, lun, dsp - hostdata->pScript, sbcl_to_string(sbcl));
1641                                 NCR_700_internal_bus_reset(host);
1642                         }
1643
1644                 } else if(sstat0 & SCSI_GROSS_ERROR) {
1645                         printk(KERN_ERR "scsi%d: (%d:%d) GROSS ERROR\n",
1646                                host->host_no, pun, lun);
1647                         NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1648                 } else if(sstat0 & PARITY_ERROR) {
1649                         printk(KERN_ERR "scsi%d: (%d:%d) PARITY ERROR\n",
1650                                host->host_no, pun, lun);
1651                         NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1652                 } else if(dstat & SCRIPT_INT_RECEIVED) {
1653                         DEBUG(("scsi%d: (%d:%d) ====>SCRIPT INTERRUPT<====\n",
1654                                host->host_no, pun, lun));
1655                         resume_offset = process_script_interrupt(dsps, dsp, SCp, host, hostdata);
1656                 } else if(dstat & (ILGL_INST_DETECTED)) {
1657                         printk(KERN_ERR "scsi%d: (%d:%d) Illegal Instruction detected at 0x%08x[0x%x]!!!\n"
1658                                "         Please email James.Bottomley@HansenPartnership.com with the details\n",
1659                                host->host_no, pun, lun,
1660                                dsp, dsp - hostdata->pScript);
1661                         NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1662                 } else if(dstat & (WATCH_DOG_INTERRUPT|ABORTED)) {
1663                         printk(KERN_ERR "scsi%d: (%d:%d) serious DMA problem, dstat=%02x\n",
1664                                host->host_no, pun, lun, dstat);
1665                         NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1666                 }
1667
1668                 
1669                 /* NOTE: selection interrupt processing MUST occur
1670                  * after script interrupt processing to correctly cope
1671                  * with the case where we process a disconnect and
1672                  * then get reselected before we process the
1673                  * disconnection */
1674                 if(sstat0 & SELECTED) {
1675                         /* FIXME: It currently takes at least FOUR
1676                          * interrupts to complete a command that
1677                          * disconnects: one for the disconnect, one
1678                          * for the reselection, one to get the
1679                          * reselection data and one to complete the
1680                          * command.  If we guess the reselected
1681                          * command here and prepare it, we only need
1682                          * to get a reselection data interrupt if we
1683                          * guessed wrongly.  Since the interrupt
1684                          * overhead is much greater than the command
1685                          * setup, this would be an efficient
1686                          * optimisation particularly as we probably
1687                          * only have one outstanding command on a
1688                          * target most of the time */
1689
1690                         resume_offset = process_selection(host, dsp);
1691
1692                 }
1693
1694         }
1695
1696         if(resume_offset) {
1697                 if(hostdata->state != NCR_700_HOST_BUSY) {
1698                         printk(KERN_ERR "scsi%d: Driver error: resume at 0x%08x [0x%04x] with non busy host!\n",
1699                                host->host_no, resume_offset, resume_offset - hostdata->pScript);
1700                         hostdata->state = NCR_700_HOST_BUSY;
1701                 }
1702
1703                 DEBUG(("Attempting to resume at %x\n", resume_offset));
1704                 NCR_700_clear_fifo(host);
1705                 NCR_700_writel(resume_offset, host, DSP_REG);
1706         } 
1707         /* There is probably a technical no-no about this: If we're a
1708          * shared interrupt and we got this interrupt because the
1709          * other device needs servicing not us, we're still going to
1710          * check our queued commands here---of course, there shouldn't
1711          * be any outstanding.... */
1712         if(hostdata->state == NCR_700_HOST_FREE) {
1713                 int i;
1714
1715                 for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
1716                         /* fairness: always run the queue from the last
1717                          * position we left off */
1718                         int j = (i + hostdata->saved_slot_position)
1719                                 % NCR_700_COMMAND_SLOTS_PER_HOST;
1720                         
1721                         if(hostdata->slots[j].state != NCR_700_SLOT_QUEUED)
1722                                 continue;
1723                         if(NCR_700_start_command(hostdata->slots[j].cmnd)) {
1724                                 DEBUG(("scsi%d: Issuing saved command slot %p, cmd %p\t\n",
1725                                        host->host_no, &hostdata->slots[j],
1726                                        hostdata->slots[j].cmnd));
1727                                 hostdata->saved_slot_position = j + 1;
1728                         }
1729
1730                         break;
1731                 }
1732         }
1733  out_unlock:
1734         spin_unlock_irqrestore(host->host_lock, flags);
1735         return IRQ_RETVAL(handled);
1736 }
1737
1738 STATIC int
1739 NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
1740 {
1741         struct NCR_700_Host_Parameters *hostdata = 
1742                 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
1743         __u32 move_ins;
1744         enum dma_data_direction direction;
1745         struct NCR_700_command_slot *slot;
1746
1747         if(hostdata->command_slot_count >= NCR_700_COMMAND_SLOTS_PER_HOST) {
1748                 /* We're over our allocation, this should never happen
1749                  * since we report the max allocation to the mid layer */
1750                 printk(KERN_WARNING "scsi%d: Command depth has gone over queue depth\n", SCp->device->host->host_no);
1751                 return 1;
1752         }
1753         /* check for untagged commands.  We cannot have any outstanding
1754          * commands if we accept them.  Commands could be untagged because:
1755          *
1756          * - The tag negotiated bitmap is clear
1757          * - The blk layer sent and untagged command
1758          */
1759         if(NCR_700_get_depth(SCp->device) != 0
1760            && (!(hostdata->tag_negotiated & (1<<scmd_id(SCp)))
1761                || !blk_rq_tagged(SCp->request))) {
1762                 CDEBUG(KERN_ERR, SCp, "has non zero depth %d\n",
1763                        NCR_700_get_depth(SCp->device));
1764                 return SCSI_MLQUEUE_DEVICE_BUSY;
1765         }
1766         if(NCR_700_get_depth(SCp->device) >= SCp->device->queue_depth) {
1767                 CDEBUG(KERN_ERR, SCp, "has max tag depth %d\n",
1768                        NCR_700_get_depth(SCp->device));
1769                 return SCSI_MLQUEUE_DEVICE_BUSY;
1770         }
1771         NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) + 1);
1772
1773         /* begin the command here */
1774         /* no need to check for NULL, test for command_slot_count above
1775          * ensures a slot is free */
1776         slot = find_empty_slot(hostdata);
1777
1778         slot->cmnd = SCp;
1779
1780         SCp->scsi_done = done;
1781         SCp->host_scribble = (unsigned char *)slot;
1782         SCp->SCp.ptr = NULL;
1783         SCp->SCp.buffer = NULL;
1784
1785 #ifdef NCR_700_DEBUG
1786         printk("53c700: scsi%d, command ", SCp->device->host->host_no);
1787         scsi_print_command(SCp);
1788 #endif
1789         if(blk_rq_tagged(SCp->request)
1790            && (hostdata->tag_negotiated &(1<<scmd_id(SCp))) == 0
1791            && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_START_TAG_NEGOTIATION) {
1792                 scmd_printk(KERN_ERR, SCp, "Enabling Tag Command Queuing\n");
1793                 hostdata->tag_negotiated |= (1<<scmd_id(SCp));
1794                 NCR_700_set_tag_neg_state(SCp->device, NCR_700_DURING_TAG_NEGOTIATION);
1795         }
1796
1797         /* here we may have to process an untagged command.  The gate
1798          * above ensures that this will be the only one outstanding,
1799          * so clear the tag negotiated bit.
1800          *
1801          * FIXME: This will royally screw up on multiple LUN devices
1802          * */
1803         if(!blk_rq_tagged(SCp->request)
1804            && (hostdata->tag_negotiated &(1<<scmd_id(SCp)))) {
1805                 scmd_printk(KERN_INFO, SCp, "Disabling Tag Command Queuing\n");
1806                 hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
1807         }
1808
1809         if((hostdata->tag_negotiated &(1<<scmd_id(SCp)))
1810            && scsi_get_tag_type(SCp->device)) {
1811                 slot->tag = SCp->request->tag;
1812                 CDEBUG(KERN_DEBUG, SCp, "sending out tag %d, slot %p\n",
1813                        slot->tag, slot);
1814         } else {
1815                 slot->tag = SCSI_NO_TAG;
1816                 /* must populate current_cmnd for scsi_find_tag to work */
1817                 SCp->device->current_cmnd = SCp;
1818         }
1819         /* sanity check: some of the commands generated by the mid-layer
1820          * have an eccentric idea of their sc_data_direction */
1821         if(!SCp->use_sg && !SCp->request_bufflen 
1822            && SCp->sc_data_direction != DMA_NONE) {
1823 #ifdef NCR_700_DEBUG
1824                 printk("53c700: Command");
1825                 scsi_print_command(SCp);
1826                 printk("Has wrong data direction %d\n", SCp->sc_data_direction);
1827 #endif
1828                 SCp->sc_data_direction = DMA_NONE;
1829         }
1830
1831         switch (SCp->cmnd[0]) {
1832         case REQUEST_SENSE:
1833                 /* clear the internal sense magic */
1834                 SCp->cmnd[6] = 0;
1835                 /* fall through */
1836         default:
1837                 /* OK, get it from the command */
1838                 switch(SCp->sc_data_direction) {
1839                 case DMA_BIDIRECTIONAL:
1840                 default:
1841                         printk(KERN_ERR "53c700: Unknown command for data direction ");
1842                         scsi_print_command(SCp);
1843                         
1844                         move_ins = 0;
1845                         break;
1846                 case DMA_NONE:
1847                         move_ins = 0;
1848                         break;
1849                 case DMA_FROM_DEVICE:
1850                         move_ins = SCRIPT_MOVE_DATA_IN;
1851                         break;
1852                 case DMA_TO_DEVICE:
1853                         move_ins = SCRIPT_MOVE_DATA_OUT;
1854                         break;
1855                 }
1856         }
1857
1858         /* now build the scatter gather list */
1859         direction = SCp->sc_data_direction;
1860         if(move_ins != 0) {
1861                 int i;
1862                 int sg_count;
1863                 dma_addr_t vPtr = 0;
1864                 __u32 count = 0;
1865
1866                 if(SCp->use_sg) {
1867                         sg_count = dma_map_sg(hostdata->dev,
1868                                               SCp->request_buffer, SCp->use_sg,
1869                                               direction);
1870                 } else {
1871                         vPtr = dma_map_single(hostdata->dev,
1872                                               SCp->request_buffer, 
1873                                               SCp->request_bufflen,
1874                                               direction);
1875                         count = SCp->request_bufflen;
1876                         slot->dma_handle = vPtr;
1877                         sg_count = 1;
1878                 }
1879                         
1880
1881                 for(i = 0; i < sg_count; i++) {
1882
1883                         if(SCp->use_sg) {
1884                                 struct scatterlist *sg = SCp->request_buffer;
1885
1886                                 vPtr = sg_dma_address(&sg[i]);
1887                                 count = sg_dma_len(&sg[i]);
1888                         }
1889
1890                         slot->SG[i].ins = bS_to_host(move_ins | count);
1891                         DEBUG((" scatter block %d: move %d[%08x] from 0x%lx\n",
1892                                i, count, slot->SG[i].ins, (unsigned long)vPtr));
1893                         slot->SG[i].pAddr = bS_to_host(vPtr);
1894                 }
1895                 slot->SG[i].ins = bS_to_host(SCRIPT_RETURN);
1896                 slot->SG[i].pAddr = 0;
1897                 dma_cache_sync(slot->SG, sizeof(slot->SG), DMA_TO_DEVICE);
1898                 DEBUG((" SETTING %08lx to %x\n",
1899                        (&slot->pSG[i].ins), 
1900                        slot->SG[i].ins));
1901         }
1902         slot->resume_offset = 0;
1903         slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd,
1904                                     sizeof(SCp->cmnd), DMA_TO_DEVICE);
1905         NCR_700_start_command(SCp);
1906         return 0;
1907 }
1908
1909 STATIC int
1910 NCR_700_abort(struct scsi_cmnd * SCp)
1911 {
1912         struct NCR_700_command_slot *slot;
1913
1914         scmd_printk(KERN_INFO, SCp,
1915                 "New error handler wants to abort command\n\t");
1916         scsi_print_command(SCp);
1917
1918         slot = (struct NCR_700_command_slot *)SCp->host_scribble;
1919
1920         if(slot == NULL)
1921                 /* no outstanding command to abort */
1922                 return SUCCESS;
1923         if(SCp->cmnd[0] == TEST_UNIT_READY) {
1924                 /* FIXME: This is because of a problem in the new
1925                  * error handler.  When it is in error recovery, it
1926                  * will send a TUR to a device it thinks may still be
1927                  * showing a problem.  If the TUR isn't responded to,
1928                  * it will abort it and mark the device off line.
1929                  * Unfortunately, it does no other error recovery, so
1930                  * this would leave us with an outstanding command
1931                  * occupying a slot.  Rather than allow this to
1932                  * happen, we issue a bus reset to force all
1933                  * outstanding commands to terminate here. */
1934                 NCR_700_internal_bus_reset(SCp->device->host);
1935                 /* still drop through and return failed */
1936         }
1937         return FAILED;
1938
1939 }
1940
1941 STATIC int
1942 NCR_700_bus_reset(struct scsi_cmnd * SCp)
1943 {
1944         DECLARE_COMPLETION(complete);
1945         struct NCR_700_Host_Parameters *hostdata = 
1946                 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
1947
1948         scmd_printk(KERN_INFO, SCp,
1949                 "New error handler wants BUS reset, cmd %p\n\t", SCp);
1950         scsi_print_command(SCp);
1951
1952         /* In theory, eh_complete should always be null because the
1953          * eh is single threaded, but just in case we're handling a
1954          * reset via sg or something */
1955         spin_lock_irq(SCp->device->host->host_lock);
1956         while (hostdata->eh_complete != NULL) {
1957                 spin_unlock_irq(SCp->device->host->host_lock);
1958                 msleep_interruptible(100);
1959                 spin_lock_irq(SCp->device->host->host_lock);
1960         }
1961
1962         hostdata->eh_complete = &complete;
1963         NCR_700_internal_bus_reset(SCp->device->host);
1964
1965         spin_unlock_irq(SCp->device->host->host_lock);
1966         wait_for_completion(&complete);
1967         spin_lock_irq(SCp->device->host->host_lock);
1968
1969         hostdata->eh_complete = NULL;
1970         /* Revalidate the transport parameters of the failing device */
1971         if(hostdata->fast)
1972                 spi_schedule_dv_device(SCp->device);
1973
1974         spin_unlock_irq(SCp->device->host->host_lock);
1975         return SUCCESS;
1976 }
1977
1978 STATIC int
1979 NCR_700_host_reset(struct scsi_cmnd * SCp)
1980 {
1981         scmd_printk(KERN_INFO, SCp, "New error handler wants HOST reset\n\t");
1982         scsi_print_command(SCp);
1983
1984         spin_lock_irq(SCp->device->host->host_lock);
1985
1986         NCR_700_internal_bus_reset(SCp->device->host);
1987         NCR_700_chip_reset(SCp->device->host);
1988
1989         spin_unlock_irq(SCp->device->host->host_lock);
1990
1991         return SUCCESS;
1992 }
1993
1994 STATIC void
1995 NCR_700_set_period(struct scsi_target *STp, int period)
1996 {
1997         struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
1998         struct NCR_700_Host_Parameters *hostdata = 
1999                 (struct NCR_700_Host_Parameters *)SHp->hostdata[0];
2000         
2001         if(!hostdata->fast)
2002                 return;
2003
2004         if(period < hostdata->min_period)
2005                 period = hostdata->min_period;
2006
2007         spi_period(STp) = period;
2008         spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC |
2009                             NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
2010         spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION;
2011 }
2012
2013 STATIC void
2014 NCR_700_set_offset(struct scsi_target *STp, int offset)
2015 {
2016         struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
2017         struct NCR_700_Host_Parameters *hostdata = 
2018                 (struct NCR_700_Host_Parameters *)SHp->hostdata[0];
2019         int max_offset = hostdata->chip710
2020                 ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET;
2021         
2022         if(!hostdata->fast)
2023                 return;
2024
2025         if(offset > max_offset)
2026                 offset = max_offset;
2027
2028         /* if we're currently async, make sure the period is reasonable */
2029         if(spi_offset(STp) == 0 && (spi_period(STp) < hostdata->min_period ||
2030                                     spi_period(STp) > 0xff))
2031                 spi_period(STp) = hostdata->min_period;
2032
2033         spi_offset(STp) = offset;
2034         spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC |
2035                             NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
2036         spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION;
2037 }
2038
2039
2040
2041 STATIC int
2042 NCR_700_slave_configure(struct scsi_device *SDp)
2043 {
2044         struct NCR_700_Host_Parameters *hostdata = 
2045                 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
2046
2047         SDp->hostdata = kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense));
2048
2049         if (!SDp->hostdata)
2050                 return -ENOMEM;
2051
2052         /* to do here: allocate memory; build a queue_full list */
2053         if(SDp->tagged_supported) {
2054                 scsi_set_tag_type(SDp, MSG_ORDERED_TAG);
2055                 scsi_activate_tcq(SDp, NCR_700_DEFAULT_TAGS);
2056                 NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
2057         } else {
2058                 /* initialise to default depth */
2059                 scsi_adjust_queue_depth(SDp, 0, SDp->host->cmd_per_lun);
2060         }
2061         if(hostdata->fast) {
2062                 /* Find the correct offset and period via domain validation */
2063                 if (!spi_initial_dv(SDp->sdev_target))
2064                         spi_dv_device(SDp);
2065         } else {
2066                 spi_offset(SDp->sdev_target) = 0;
2067                 spi_period(SDp->sdev_target) = 0;
2068         }
2069         return 0;
2070 }
2071
2072 STATIC void
2073 NCR_700_slave_destroy(struct scsi_device *SDp)
2074 {
2075         kfree(SDp->hostdata);
2076         SDp->hostdata = NULL;
2077 }
2078
2079 static int
2080 NCR_700_change_queue_depth(struct scsi_device *SDp, int depth)
2081 {
2082         if (depth > NCR_700_MAX_TAGS)
2083                 depth = NCR_700_MAX_TAGS;
2084
2085         scsi_adjust_queue_depth(SDp, scsi_get_tag_type(SDp), depth);
2086         return depth;
2087 }
2088
2089 static int NCR_700_change_queue_type(struct scsi_device *SDp, int tag_type)
2090 {
2091         int change_tag = ((tag_type ==0 &&  scsi_get_tag_type(SDp) != 0)
2092                           || (tag_type != 0 && scsi_get_tag_type(SDp) == 0));
2093         struct NCR_700_Host_Parameters *hostdata = 
2094                 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
2095
2096         scsi_set_tag_type(SDp, tag_type);
2097
2098         /* We have a global (per target) flag to track whether TCQ is
2099          * enabled, so we'll be turning it off for the entire target here.
2100          * our tag algorithm will fail if we mix tagged and untagged commands,
2101          * so quiesce the device before doing this */
2102         if (change_tag)
2103                 scsi_target_quiesce(SDp->sdev_target);
2104
2105         if (!tag_type) {
2106                 /* shift back to the default unqueued number of commands
2107                  * (the user can still raise this) */
2108                 scsi_deactivate_tcq(SDp, SDp->host->cmd_per_lun);
2109                 hostdata->tag_negotiated &= ~(1 << sdev_id(SDp));
2110         } else {
2111                 /* Here, we cleared the negotiation flag above, so this
2112                  * will force the driver to renegotiate */
2113                 scsi_activate_tcq(SDp, SDp->queue_depth);
2114                 if (change_tag)
2115                         NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
2116         }
2117         if (change_tag)
2118                 scsi_target_resume(SDp->sdev_target);
2119
2120         return tag_type;
2121 }
2122
2123 static ssize_t
2124 NCR_700_show_active_tags(struct device *dev, struct device_attribute *attr, char *buf)
2125 {
2126         struct scsi_device *SDp = to_scsi_device(dev);
2127
2128         return snprintf(buf, 20, "%d\n", NCR_700_get_depth(SDp));
2129 }
2130
2131 static struct device_attribute NCR_700_active_tags_attr = {
2132         .attr = {
2133                 .name =         "active_tags",
2134                 .mode =         S_IRUGO,
2135         },
2136         .show = NCR_700_show_active_tags,
2137 };
2138
2139 STATIC struct device_attribute *NCR_700_dev_attrs[] = {
2140         &NCR_700_active_tags_attr,
2141         NULL,
2142 };
2143
2144 EXPORT_SYMBOL(NCR_700_detect);
2145 EXPORT_SYMBOL(NCR_700_release);
2146 EXPORT_SYMBOL(NCR_700_intr);
2147
2148 static struct spi_function_template NCR_700_transport_functions =  {
2149         .set_period     = NCR_700_set_period,
2150         .show_period    = 1,
2151         .set_offset     = NCR_700_set_offset,
2152         .show_offset    = 1,
2153 };
2154
2155 static int __init NCR_700_init(void)
2156 {
2157         NCR_700_transport_template = spi_attach_transport(&NCR_700_transport_functions);
2158         if(!NCR_700_transport_template)
2159                 return -ENODEV;
2160         return 0;
2161 }
2162
2163 static void __exit NCR_700_exit(void)
2164 {
2165         spi_release_transport(NCR_700_transport_template);
2166 }
2167
2168 module_init(NCR_700_init);
2169 module_exit(NCR_700_exit);
2170