git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/p54/p54spi.c

   1 /*
   2  * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
   3  * Copyright 2008       Johannes Berg <johannes@sipsolutions.net>
   4  *
   5  * This driver is a port from stlc45xx:
   6  *      Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/firmware.h>
  27 #include <linux/delay.h>
  28 #include <linux/irq.h>
  29 #include <linux/spi/spi.h>
  30 #include <linux/etherdevice.h>
  31 #include <linux/gpio.h>
  32
  33 #include "p54spi.h"
  34 #include "p54spi_eeprom.h"
  35 #include "p54.h"
  36
  37 #include "p54common.h"
  38
  39 MODULE_FIRMWARE("3826.arm");
  40 MODULE_ALIAS("stlc45xx");
  41
  42 /*
  43  * gpios should be handled in board files and provided via platform data,
  44  * but because it's currently impossible for p54spi to have a header file
  45  * in include/linux, let's use module paramaters for now
  46  */
  47
  48 static int p54spi_gpio_power = 97;
  49 module_param(p54spi_gpio_power, int, 0444);
  50 MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
  51
  52 static int p54spi_gpio_irq = 87;
  53 module_param(p54spi_gpio_irq, int, 0444);
  54 MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
  55
  56 static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
  57                               void *buf, size_t len)
  58 {
  59         struct spi_transfer t[2];
  60         struct spi_message m;
  61         __le16 addr;
  62
  63         /* We first push the address */
  64         addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
  65
  66         spi_message_init(&m);
  67         memset(t, 0, sizeof(t));
  68
  69         t[0].tx_buf = &addr;
  70         t[0].len = sizeof(addr);
  71         spi_message_add_tail(&t[0], &m);
  72
  73         t[1].rx_buf = buf;
  74         t[1].len = len;
  75         spi_message_add_tail(&t[1], &m);
  76
  77         spi_sync(priv->spi, &m);
  78 }
  79
  80
  81 static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
  82                              const void *buf, size_t len)
  83 {
  84         struct spi_transfer t[3];
  85         struct spi_message m;
  86         __le16 addr;
  87
  88         /* We first push the address */
  89         addr = cpu_to_le16(address << 8);
  90
  91         spi_message_init(&m);
  92         memset(t, 0, sizeof(t));
  93
  94         t[0].tx_buf = &addr;
  95         t[0].len = sizeof(addr);
  96         spi_message_add_tail(&t[0], &m);
  97
  98         t[1].tx_buf = buf;
  99         t[1].len = len & ~1;
 100         spi_message_add_tail(&t[1], &m);
 101
 102         if (len % 2) {
 103                 __le16 last_word;
 104                 last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
 105
 106                 t[2].tx_buf = &last_word;
 107                 t[2].len = sizeof(last_word);
 108                 spi_message_add_tail(&t[2], &m);
 109         }
 110
 111         spi_sync(priv->spi, &m);
 112 }
 113
 114 static u16 p54spi_read16(struct p54s_priv *priv, u8 addr)
 115 {
 116         __le16 val;
 117
 118         p54spi_spi_read(priv, addr, &val, sizeof(val));
 119
 120         return le16_to_cpu(val);
 121 }
 122
 123 static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
 124 {
 125         __le32 val;
 126
 127         p54spi_spi_read(priv, addr, &val, sizeof(val));
 128
 129         return le32_to_cpu(val);
 130 }
 131
 132 static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
 133 {
 134         p54spi_spi_write(priv, addr, &val, sizeof(val));
 135 }
 136
 137 static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
 138 {
 139         p54spi_spi_write(priv, addr, &val, sizeof(val));
 140 }
 141
 142 struct p54spi_spi_reg {
 143         u16 address;            /* __le16 ? */
 144         u16 length;
 145         char *name;
 146 };
 147
 148 static const struct p54spi_spi_reg p54spi_registers_array[] =
 149 {
 150         { SPI_ADRS_ARM_INTERRUPTS,      32, "ARM_INT     " },
 151         { SPI_ADRS_ARM_INT_EN,          32, "ARM_INT_ENA " },
 152         { SPI_ADRS_HOST_INTERRUPTS,     32, "HOST_INT    " },
 153         { SPI_ADRS_HOST_INT_EN,         32, "HOST_INT_ENA" },
 154         { SPI_ADRS_HOST_INT_ACK,        32, "HOST_INT_ACK" },
 155         { SPI_ADRS_GEN_PURP_1,          32, "GP1_COMM    " },
 156         { SPI_ADRS_GEN_PURP_2,          32, "GP2_COMM    " },
 157         { SPI_ADRS_DEV_CTRL_STAT,       32, "DEV_CTRL_STA" },
 158         { SPI_ADRS_DMA_DATA,            16, "DMA_DATA    " },
 159         { SPI_ADRS_DMA_WRITE_CTRL,      16, "DMA_WR_CTRL " },
 160         { SPI_ADRS_DMA_WRITE_LEN,       16, "DMA_WR_LEN  " },
 161         { SPI_ADRS_DMA_WRITE_BASE,      32, "DMA_WR_BASE " },
 162         { SPI_ADRS_DMA_READ_CTRL,       16, "DMA_RD_CTRL " },
 163         { SPI_ADRS_DMA_READ_LEN,        16, "DMA_RD_LEN  " },
 164         { SPI_ADRS_DMA_WRITE_BASE,      32, "DMA_RD_BASE " }
 165 };
 166
 167 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
 168 {
 169         int i;
 170
 171         for (i = 0; i < 2000; i++) {
 172                 __le32 buffer = p54spi_read32(priv, reg);
 173                 if ((buffer & bits) == bits)
 174                         return 1;
 175         }
 176         return 0;
 177 }
 178
 179 static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
 180                                 const void *buf, size_t len)
 181 {
 182         if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
 183                              cpu_to_le32(HOST_ALLOWED))) {
 184                 dev_err(&priv->spi->dev, "spi_write_dma not allowed "
 185                         "to DMA write.\n");
 186                 return -EAGAIN;
 187         }
 188
 189         p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
 190                        cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
 191
 192         p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
 193         p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
 194         p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
 195         return 0;
 196 }
 197
 198 static int p54spi_request_firmware(struct ieee80211_hw *dev)
 199 {
 200         struct p54s_priv *priv = dev->priv;
 201         int ret;
 202
 203         /* FIXME: should driver use it's own struct device? */
 204         ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
 205
 206         if (ret < 0) {
 207                 dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
 208                 return ret;
 209         }
 210
 211         ret = p54_parse_firmware(dev, priv->firmware);
 212         if (ret) {
 213                 release_firmware(priv->firmware);
 214                 return ret;
 215         }
 216
 217         return 0;
 218 }
 219
 220 static int p54spi_request_eeprom(struct ieee80211_hw *dev)
 221 {
 222         struct p54s_priv *priv = dev->priv;
 223         const struct firmware *eeprom;
 224         int ret;
 225
 226         /*
 227          * allow users to customize their eeprom.
 228          */
 229
 230         ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
 231         if (ret < 0) {
 232                 dev_info(&priv->spi->dev, "loading default eeprom...\n");
 233                 ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
 234                                        sizeof(p54spi_eeprom));
 235         } else {
 236                 dev_info(&priv->spi->dev, "loading user eeprom...\n");
 237                 ret = p54_parse_eeprom(dev, (void *) eeprom->data,
 238                                        (int)eeprom->size);
 239                 release_firmware(eeprom);
 240         }
 241         return ret;
 242 }
 243
 244 static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 245 {
 246         struct p54s_priv *priv = dev->priv;
 247         unsigned long fw_len, _fw_len;
 248         unsigned int offset = 0;
 249         int err = 0;
 250         u8 *fw;
 251
 252         fw_len = priv->firmware->size;
 253         fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
 254         if (!fw)
 255                 return -ENOMEM;
 256
 257         /* stop the device */
 258         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 259                        SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
 260                        SPI_CTRL_STAT_START_HALTED));
 261
 262         msleep(TARGET_BOOT_SLEEP);
 263
 264         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 265                        SPI_CTRL_STAT_HOST_OVERRIDE |
 266                        SPI_CTRL_STAT_START_HALTED));
 267
 268         msleep(TARGET_BOOT_SLEEP);
 269
 270         while (fw_len > 0) {
 271                 _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
 272
 273                 err = p54spi_spi_write_dma(priv, cpu_to_le32(
 274                                            ISL38XX_DEV_FIRMWARE_ADDR + offset),
 275                                            (fw + offset), _fw_len);
 276                 if (err < 0)
 277                         goto out;
 278
 279                 fw_len -= _fw_len;
 280                 offset += _fw_len;
 281         }
 282
 283         BUG_ON(fw_len != 0);
 284
 285         /* enable host interrupts */
 286         p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
 287                        cpu_to_le32(SPI_HOST_INTS_DEFAULT));
 288
 289         /* boot the device */
 290         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 291                        SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
 292                        SPI_CTRL_STAT_RAM_BOOT));
 293
 294         msleep(TARGET_BOOT_SLEEP);
 295
 296         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 297                        SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
 298         msleep(TARGET_BOOT_SLEEP);
 299
 300 out:
 301         kfree(fw);
 302         return err;
 303 }
 304
 305 static void p54spi_power_off(struct p54s_priv *priv)
 306 {
 307         disable_irq(gpio_to_irq(p54spi_gpio_irq));
 308         gpio_set_value(p54spi_gpio_power, 0);
 309 }
 310
 311 static void p54spi_power_on(struct p54s_priv *priv)
 312 {
 313         gpio_set_value(p54spi_gpio_power, 1);
 314         enable_irq(gpio_to_irq(p54spi_gpio_irq));
 315
 316         /*
 317          * need to wait a while before device can be accessed, the lenght
 318          * is just a guess
 319          */
 320         msleep(10);
 321 }
 322
 323 static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
 324 {
 325         p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
 326 }
 327
 328 static int p54spi_wakeup(struct p54s_priv *priv)
 329 {
 330         /* wake the chip */
 331         p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 332                        cpu_to_le32(SPI_TARGET_INT_WAKEUP));
 333
 334         /* And wait for the READY interrupt */
 335         if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
 336                              cpu_to_le32(SPI_HOST_INT_READY))) {
 337                 dev_err(&priv->spi->dev, "INT_READY timeout\n");
 338                 return -EBUSY;
 339         }
 340
 341         p54spi_int_ack(priv, SPI_HOST_INT_READY);
 342         return 0;
 343 }
 344
 345 static inline void p54spi_sleep(struct p54s_priv *priv)
 346 {
 347         p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 348                        cpu_to_le32(SPI_TARGET_INT_SLEEP));
 349 }
 350
 351 static void p54spi_int_ready(struct p54s_priv *priv)
 352 {
 353         p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
 354                        SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
 355
 356         switch (priv->fw_state) {
 357         case FW_STATE_BOOTING:
 358                 priv->fw_state = FW_STATE_READY;
 359                 complete(&priv->fw_comp);
 360                 break;
 361         case FW_STATE_RESETTING:
 362                 priv->fw_state = FW_STATE_READY;
 363                 /* TODO: reinitialize state */
 364                 break;
 365         default:
 366                 break;
 367         }
 368 }
 369
 370 static int p54spi_rx(struct p54s_priv *priv)
 371 {
 372         struct sk_buff *skb;
 373         u16 len;
 374
 375         if (p54spi_wakeup(priv) < 0)
 376                 return -EBUSY;
 377
 378         /* dummy read to flush SPI DMA controller bug */
 379         p54spi_read16(priv, SPI_ADRS_GEN_PURP_1);
 380
 381         len = p54spi_read16(priv, SPI_ADRS_DMA_DATA);
 382
 383         if (len == 0) {
 384                 dev_err(&priv->spi->dev, "rx request of zero bytes");
 385                 return 0;
 386         }
 387
 388
 389         /* Firmware may insert up to 4 padding bytes after the lmac header,
 390          * but it does not amend the size of SPI data transfer.
 391          * Such packets has correct data size in header, thus referencing
 392          * past the end of allocated skb. Reserve extra 4 bytes for this case */
 393         skb = dev_alloc_skb(len + 4);
 394         if (!skb) {
 395                 dev_err(&priv->spi->dev, "could not alloc skb");
 396                 return 0;
 397         }
 398
 399         p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, skb_put(skb, len), len);
 400         p54spi_sleep(priv);
 401         /* Put additional bytes to compensate for the possible
 402          * alignment-caused truncation */
 403         skb_put(skb, 4);
 404
 405         if (p54_rx(priv->hw, skb) == 0)
 406                 dev_kfree_skb(skb);
 407
 408         return 0;
 409 }
 410
 411
 412 static irqreturn_t p54spi_interrupt(int irq, void *config)
 413 {
 414         struct spi_device *spi = config;
 415         struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
 416
 417         queue_work(priv->hw->workqueue, &priv->work);
 418
 419         return IRQ_HANDLED;
 420 }
 421
 422 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
 423 {
 424         struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 425         int ret = 0;
 426
 427         if (p54spi_wakeup(priv) < 0)
 428                 return -EBUSY;
 429
 430         ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
 431         if (ret < 0)
 432                 goto out;
 433
 434         if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
 435                              cpu_to_le32(SPI_HOST_INT_WR_READY))) {
 436                 dev_err(&priv->spi->dev, "WR_READY timeout\n");
 437                 ret = -EAGAIN;
 438                 goto out;
 439         }
 440
 441         p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
 442
 443         if (FREE_AFTER_TX(skb))
 444                 p54_free_skb(priv->hw, skb);
 445 out:
 446         p54spi_sleep(priv);
 447         return ret;
 448 }
 449
 450 static int p54spi_wq_tx(struct p54s_priv *priv)
 451 {
 452         struct p54s_tx_info *entry;
 453         struct sk_buff *skb;
 454         struct ieee80211_tx_info *info;
 455         struct p54_tx_info *minfo;
 456         struct p54s_tx_info *dinfo;
 457         unsigned long flags;
 458         int ret = 0;
 459
 460         spin_lock_irqsave(&priv->tx_lock, flags);
 461
 462         while (!list_empty(&priv->tx_pending)) {
 463                 entry = list_entry(priv->tx_pending.next,
 464                                    struct p54s_tx_info, tx_list);
 465
 466                 list_del_init(&entry->tx_list);
 467
 468                 spin_unlock_irqrestore(&priv->tx_lock, flags);
 469
 470                 dinfo = container_of((void *) entry, struct p54s_tx_info,
 471                                      tx_list);
 472                 minfo = container_of((void *) dinfo, struct p54_tx_info,
 473                                      data);
 474                 info = container_of((void *) minfo, struct ieee80211_tx_info,
 475                                     rate_driver_data);
 476                 skb = container_of((void *) info, struct sk_buff, cb);
 477
 478                 ret = p54spi_tx_frame(priv, skb);
 479
 480                 if (ret < 0) {
 481                         p54_free_skb(priv->hw, skb);
 482                         return ret;
 483                 }
 484
 485                 spin_lock_irqsave(&priv->tx_lock, flags);
 486         }
 487         spin_unlock_irqrestore(&priv->tx_lock, flags);
 488         return ret;
 489 }
 490
 491 static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 492 {
 493         struct p54s_priv *priv = dev->priv;
 494         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 495         struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
 496         struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
 497         unsigned long flags;
 498
 499         BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
 500
 501         spin_lock_irqsave(&priv->tx_lock, flags);
 502         list_add_tail(&di->tx_list, &priv->tx_pending);
 503         spin_unlock_irqrestore(&priv->tx_lock, flags);
 504
 505         queue_work(priv->hw->workqueue, &priv->work);
 506 }
 507
 508 static void p54spi_work(struct work_struct *work)
 509 {
 510         struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
 511         u32 ints;
 512         int ret;
 513
 514         mutex_lock(&priv->mutex);
 515
 516         if (priv->fw_state == FW_STATE_OFF &&
 517             priv->fw_state == FW_STATE_RESET)
 518                 goto out;
 519
 520         ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
 521
 522         if (ints & SPI_HOST_INT_READY) {
 523                 p54spi_int_ready(priv);
 524                 p54spi_int_ack(priv, SPI_HOST_INT_READY);
 525         }
 526
 527         if (priv->fw_state != FW_STATE_READY)
 528                 goto out;
 529
 530         if (ints & SPI_HOST_INT_UPDATE) {
 531                 p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
 532                 ret = p54spi_rx(priv);
 533                 if (ret < 0)
 534                         goto out;
 535         }
 536         if (ints & SPI_HOST_INT_SW_UPDATE) {
 537                 p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
 538                 ret = p54spi_rx(priv);
 539                 if (ret < 0)
 540                         goto out;
 541         }
 542
 543         ret = p54spi_wq_tx(priv);
 544 out:
 545         mutex_unlock(&priv->mutex);
 546 }
 547
 548 static int p54spi_op_start(struct ieee80211_hw *dev)
 549 {
 550         struct p54s_priv *priv = dev->priv;
 551         unsigned long timeout;
 552         int ret = 0;
 553
 554         if (mutex_lock_interruptible(&priv->mutex)) {
 555                 ret = -EINTR;
 556                 goto out;
 557         }
 558
 559         priv->fw_state = FW_STATE_BOOTING;
 560
 561         p54spi_power_on(priv);
 562
 563         ret = p54spi_upload_firmware(dev);
 564         if (ret < 0) {
 565                 p54spi_power_off(priv);
 566                 goto out_unlock;
 567         }
 568
 569         mutex_unlock(&priv->mutex);
 570
 571         timeout = msecs_to_jiffies(2000);
 572         timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
 573                                                             timeout);
 574         if (!timeout) {
 575                 dev_err(&priv->spi->dev, "firmware boot failed");
 576                 p54spi_power_off(priv);
 577                 ret = -1;
 578                 goto out;
 579         }
 580
 581         if (mutex_lock_interruptible(&priv->mutex)) {
 582                 ret = -EINTR;
 583                 p54spi_power_off(priv);
 584                 goto out;
 585         }
 586
 587         WARN_ON(priv->fw_state != FW_STATE_READY);
 588
 589 out_unlock:
 590         mutex_unlock(&priv->mutex);
 591
 592 out:
 593         return ret;
 594 }
 595
 596 static void p54spi_op_stop(struct ieee80211_hw *dev)
 597 {
 598         struct p54s_priv *priv = dev->priv;
 599         unsigned long flags;
 600
 601         if (mutex_lock_interruptible(&priv->mutex)) {
 602                 /* FIXME: how to handle this error? */
 603                 return;
 604         }
 605
 606         WARN_ON(priv->fw_state != FW_STATE_READY);
 607
 608         cancel_work_sync(&priv->work);
 609
 610         p54spi_power_off(priv);
 611         spin_lock_irqsave(&priv->tx_lock, flags);
 612         INIT_LIST_HEAD(&priv->tx_pending);
 613         spin_unlock_irqrestore(&priv->tx_lock, flags);
 614
 615         priv->fw_state = FW_STATE_OFF;
 616         mutex_unlock(&priv->mutex);
 617 }
 618
 619 static int __devinit p54spi_probe(struct spi_device *spi)
 620 {
 621         struct p54s_priv *priv = NULL;
 622         struct ieee80211_hw *hw;
 623         int ret = -EINVAL;
 624
 625         hw = p54_init_common(sizeof(*priv));
 626         if (!hw) {
 627                 dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
 628                 return -ENOMEM;
 629         }
 630
 631         priv = hw->priv;
 632         priv->hw = hw;
 633         dev_set_drvdata(&spi->dev, priv);
 634         priv->spi = spi;
 635
 636         spi->bits_per_word = 16;
 637         spi->max_speed_hz = 24000000;
 638
 639         ret = spi_setup(spi);
 640         if (ret < 0) {
 641                 dev_err(&priv->spi->dev, "spi_setup failed");
 642                 goto err_free_common;
 643         }
 644
 645         ret = gpio_request(p54spi_gpio_power, "p54spi power");
 646         if (ret < 0) {
 647                 dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
 648                 goto err_free_common;
 649         }
 650
 651         ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
 652         if (ret < 0) {
 653                 dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
 654                 goto err_free_common;
 655         }
 656
 657         gpio_direction_output(p54spi_gpio_power, 0);
 658         gpio_direction_input(p54spi_gpio_irq);
 659
 660         ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
 661                           p54spi_interrupt, IRQF_DISABLED, "p54spi",
 662                           priv->spi);
 663         if (ret < 0) {
 664                 dev_err(&priv->spi->dev, "request_irq() failed");
 665                 goto err_free_common;
 666         }
 667
 668         set_irq_type(gpio_to_irq(p54spi_gpio_irq),
 669                      IRQ_TYPE_EDGE_RISING);
 670
 671         disable_irq(gpio_to_irq(p54spi_gpio_irq));
 672
 673         INIT_WORK(&priv->work, p54spi_work);
 674         init_completion(&priv->fw_comp);
 675         INIT_LIST_HEAD(&priv->tx_pending);
 676         mutex_init(&priv->mutex);
 677         SET_IEEE80211_DEV(hw, &spi->dev);
 678         priv->common.open = p54spi_op_start;
 679         priv->common.stop = p54spi_op_stop;
 680         priv->common.tx = p54spi_op_tx;
 681
 682         ret = p54spi_request_firmware(hw);
 683         if (ret < 0)
 684                 goto err_free_common;
 685
 686         ret = p54spi_request_eeprom(hw);
 687         if (ret)
 688                 goto err_free_common;
 689
 690         ret = p54_register_common(hw, &priv->spi->dev);
 691         if (ret)
 692                 goto err_free_common;
 693
 694         return 0;
 695
 696 err_free_common:
 697         p54_free_common(priv->hw);
 698         return ret;
 699 }
 700
 701 static int __devexit p54spi_remove(struct spi_device *spi)
 702 {
 703         struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
 704
 705         ieee80211_unregister_hw(priv->hw);
 706
 707         free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
 708
 709         gpio_free(p54spi_gpio_power);
 710         gpio_free(p54spi_gpio_irq);
 711         release_firmware(priv->firmware);
 712
 713         mutex_destroy(&priv->mutex);
 714
 715         p54_free_common(priv->hw);
 716         ieee80211_free_hw(priv->hw);
 717
 718         return 0;
 719 }
 720
 721
 722 static struct spi_driver p54spi_driver = {
 723         .driver = {
 724                 /* use cx3110x name because board-n800.c uses that for the
 725                  * SPI port */
 726                 .name           = "cx3110x",
 727                 .bus            = &spi_bus_type,
 728                 .owner          = THIS_MODULE,
 729         },
 730
 731         .probe          = p54spi_probe,
 732         .remove         = __devexit_p(p54spi_remove),
 733 };
 734
 735 static int __init p54spi_init(void)
 736 {
 737         int ret;
 738
 739         ret = spi_register_driver(&p54spi_driver);
 740         if (ret < 0) {
 741                 printk(KERN_ERR "failed to register SPI driver: %d", ret);
 742                 goto out;
 743         }
 744
 745 out:
 746         return ret;
 747 }
 748
 749 static void __exit p54spi_exit(void)
 750 {
 751         spi_unregister_driver(&p54spi_driver);
 752 }
 753
 754 module_init(p54spi_init);
 755 module_exit(p54spi_exit);
 756
 757 MODULE_LICENSE("GPL");
 758 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");