1 #include <linux/module.h>
2 #include <linux/stddef.h>
3 #include <linux/init.h>
4 #include <linux/sched.h>
5 #include <linux/signal.h>
6 #include <linux/interrupt.h>
9 #include <asm/8xx_immap.h>
10 #include <asm/mpc8xx.h>
11 #include "ppc8xx_pic.h"
13 extern int cpm_get_irq(struct pt_regs *regs);
15 /* The 8xx internal interrupt controller. It is usually
16 * the only interrupt controller. Some boards, like the MBX and
17 * Sandpoint have the 8259 as a secondary controller. Depending
18 * upon the processor type, the internal controller can have as
19 * few as 16 interrups or as many as 64. We could use the
20 * "clear_bit()" and "set_bit()" functions like other platforms,
21 * but they are overkill for us.
24 static void m8xx_mask_irq(unsigned int irq_nr)
31 ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
32 out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
35 static void m8xx_unmask_irq(unsigned int irq_nr)
42 ppc_cached_irq_mask[word] |= (1 << (31-bit));
43 out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
46 static void m8xx_end_irq(unsigned int irq_nr)
48 if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
49 && irq_desc[irq_nr].action) {
55 ppc_cached_irq_mask[word] |= (1 << (31-bit));
56 out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
61 static void m8xx_mask_and_ack(unsigned int irq_nr)
68 ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
69 out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
70 out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend, 1 << (31-bit));
73 struct hw_interrupt_type ppc8xx_pic = {
74 .typename = " 8xx SIU ",
75 .enable = m8xx_unmask_irq,
76 .disable = m8xx_mask_irq,
77 .ack = m8xx_mask_and_ack,
82 * We either return a valid interrupt or -1 if there is nothing pending
85 m8xx_get_irq(struct pt_regs *regs)
89 /* For MPC8xx, read the SIVEC register and shift the bits down
90 * to get the irq number.
92 irq = in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec) >> 26;
95 * When we read the sivec without an interrupt to process, we will
96 * get back SIU_LEVEL7. In this case, return -1
98 if (irq == CPM_INTERRUPT)
99 irq = CPM_IRQ_OFFSET + cpm_get_irq(regs);
100 #if defined(CONFIG_PCI)
101 else if (irq == ISA_BRIDGE_INT) {
104 if ((isa_irq = i8259_poll(regs)) >= 0)
105 irq = I8259_IRQ_OFFSET + isa_irq;
107 #endif /* CONFIG_PCI */
108 else if (irq == SIU_LEVEL7)
114 #if defined(CONFIG_MBX) && defined(CONFIG_PCI)
115 /* Only the MBX uses the external 8259. This allows us to catch standard
116 * drivers that may mess up the internal interrupt controllers, and also
117 * allow them to run without modification on the MBX.
119 void mbx_i8259_action(int irq, void *dev_id, struct pt_regs *regs)
121 /* This interrupt handler never actually gets called. It is
122 * installed only to unmask the 8259 cascade interrupt in the SIU
123 * and to make the 8259 cascade interrupt visible in /proc/interrupts.
126 #endif /* CONFIG_PCI */