Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
[linux-2.6] / drivers / media / common / saa7146_vbi.c
1 #include <media/saa7146_vv.h>
2
3 static int vbi_pixel_to_capture = 720 * 2;
4
5 static int vbi_workaround(struct saa7146_dev *dev)
6 {
7         struct saa7146_vv *vv = dev->vv_data;
8
9         u32          *cpu;
10         dma_addr_t   dma_addr;
11
12         int count = 0;
13         int i;
14
15         DECLARE_WAITQUEUE(wait, current);
16
17         DEB_VBI(("dev:%p\n",dev));
18
19         /* once again, a bug in the saa7146: the brs acquisition
20            is buggy and especially the BXO-counter does not work
21            as specified. there is this workaround, but please
22            don't let me explain it. ;-) */
23
24         cpu = pci_alloc_consistent(dev->pci, 4096, &dma_addr);
25         if (NULL == cpu)
26                 return -ENOMEM;
27
28         /* setup some basic programming, just for the workaround */
29         saa7146_write(dev, BASE_EVEN3,  dma_addr);
30         saa7146_write(dev, BASE_ODD3,   dma_addr+vbi_pixel_to_capture);
31         saa7146_write(dev, PROT_ADDR3,  dma_addr+4096);
32         saa7146_write(dev, PITCH3,      vbi_pixel_to_capture);
33         saa7146_write(dev, BASE_PAGE3,  0x0);
34         saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0));
35         saa7146_write(dev, MC2, MASK_04|MASK_20);
36
37         /* load brs-control register */
38         WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
39         /* BXO = 1h, BRS to outbound */
40         WRITE_RPS1(0xc000008c);
41         /* wait for vbi_a or vbi_b*/
42         if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
43                 DEB_D(("...using port b\n"));
44                 WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B);
45                 WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B);
46 /*
47                 WRITE_RPS1(CMD_PAUSE | MASK_09);
48 */
49         } else {
50                 DEB_D(("...using port a\n"));
51                 WRITE_RPS1(CMD_PAUSE | MASK_10);
52         }
53         /* upload brs */
54         WRITE_RPS1(CMD_UPLOAD | MASK_08);
55         /* load brs-control register */
56         WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
57         /* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */
58         WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19);
59         /* wait for brs_done */
60         WRITE_RPS1(CMD_PAUSE | MASK_08);
61         /* upload brs */
62         WRITE_RPS1(CMD_UPLOAD | MASK_08);
63         /* load video-dma3 NumLines3 and NumBytes3 */
64         WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4));
65         /* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */
66         WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture));
67         /* load brs-control register */
68         WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
69         /* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */
70         WRITE_RPS1((540 << 7) | (5 << 19));  // 5 == vbi_start
71         /* wait for brs_done */
72         WRITE_RPS1(CMD_PAUSE | MASK_08);
73         /* upload brs and video-dma3*/
74         WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04);
75         /* load mc2 register: enable dma3 */
76         WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4));
77         WRITE_RPS1(MASK_20 | MASK_04);
78         /* generate interrupt */
79         WRITE_RPS1(CMD_INTERRUPT);
80         /* stop rps1 */
81         WRITE_RPS1(CMD_STOP);
82
83         /* we have to do the workaround twice to be sure that
84            everything is ok */
85         for(i = 0; i < 2; i++) {
86
87                 /* indicate to the irq handler that we do the workaround */
88                 saa7146_write(dev, MC2, MASK_31|MASK_15);
89
90                 saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0));
91                 saa7146_write(dev, MC2, MASK_04|MASK_20);
92
93                 /* enable rps1 irqs */
94                 SAA7146_IER_ENABLE(dev,MASK_28);
95
96                 /* prepare to wait to be woken up by the irq-handler */
97                 add_wait_queue(&vv->vbi_wq, &wait);
98                 current->state = TASK_INTERRUPTIBLE;
99
100                 /* start rps1 to enable workaround */
101                 saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
102                 saa7146_write(dev, MC1, (MASK_13 | MASK_29));
103
104                 schedule();
105
106                 DEB_VBI(("brs bug workaround %d/1.\n",i));
107
108                 remove_wait_queue(&vv->vbi_wq, &wait);
109                 current->state = TASK_RUNNING;
110
111                 /* disable rps1 irqs */
112                 SAA7146_IER_DISABLE(dev,MASK_28);
113
114                 /* stop video-dma3 */
115                 saa7146_write(dev, MC1, MASK_20);
116
117                 if(signal_pending(current)) {
118
119                         DEB_VBI(("aborted (rps:0x%08x).\n",saa7146_read(dev,RPS_ADDR1)));
120
121                         /* stop rps1 for sure */
122                         saa7146_write(dev, MC1, MASK_29);
123
124                         pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
125                         return -EINTR;
126                 }
127         }
128
129         pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
130         return 0;
131 }
132
133 static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
134 {
135         struct saa7146_vv *vv = dev->vv_data;
136
137         struct saa7146_video_dma vdma3;
138
139         int count = 0;
140         unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
141         unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
142
143 /*
144         vdma3.base_even = 0xc8000000+2560*70;
145         vdma3.base_odd  = 0xc8000000;
146         vdma3.prot_addr = 0xc8000000+2560*164;
147         vdma3.pitch     = 2560;
148         vdma3.base_page = 0;
149         vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above!
150 */
151         vdma3.base_even = buf->pt[2].offset;
152         vdma3.base_odd  = buf->pt[2].offset + 16 * vbi_pixel_to_capture;
153         vdma3.prot_addr = buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture;
154         vdma3.pitch     = vbi_pixel_to_capture;
155         vdma3.base_page = buf->pt[2].dma | ME1;
156         vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture;
157
158         saa7146_write_out_dma(dev, 3, &vdma3);
159
160         /* write beginning of rps-program */
161         count = 0;
162
163         /* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */
164
165         /* we don't wait here for the first field anymore. this is different from the video
166            capture and might cause that the first buffer is only half filled (with only
167            one field). but since this is some sort of streaming data, this is not that negative.
168            but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
169
170 /*
171         WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
172         WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait);
173 */
174         /* set bit 1 */
175         WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4));
176         WRITE_RPS1(MASK_28 | MASK_12);
177
178         /* turn on video-dma3 */
179         WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4));
180         WRITE_RPS1(MASK_04 | MASK_20);                  /* => mask */
181         WRITE_RPS1(MASK_04 | MASK_20);                  /* => values */
182
183         /* wait for o_fid_a/b / e_fid_a/b toggle */
184         WRITE_RPS1(CMD_PAUSE | o_wait);
185         WRITE_RPS1(CMD_PAUSE | e_wait);
186
187         /* generate interrupt */
188         WRITE_RPS1(CMD_INTERRUPT);
189
190         /* stop */
191         WRITE_RPS1(CMD_STOP);
192
193         /* enable rps1 irqs */
194         SAA7146_IER_ENABLE(dev, MASK_28);
195
196         /* write the address of the rps-program */
197         saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
198
199         /* turn on rps */
200         saa7146_write(dev, MC1, (MASK_13 | MASK_29));
201 }
202
203 static int buffer_activate(struct saa7146_dev *dev,
204                            struct saa7146_buf *buf,
205                            struct saa7146_buf *next)
206 {
207         struct saa7146_vv *vv = dev->vv_data;
208         buf->vb.state = VIDEOBUF_ACTIVE;
209
210         DEB_VBI(("dev:%p, buf:%p, next:%p\n",dev,buf,next));
211         saa7146_set_vbi_capture(dev,buf,next);
212
213         mod_timer(&vv->vbi_q.timeout, jiffies+BUFFER_TIMEOUT);
214         return 0;
215 }
216
217 static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field)
218 {
219         struct file *file = q->priv_data;
220         struct saa7146_fh *fh = file->private_data;
221         struct saa7146_dev *dev = fh->dev;
222         struct saa7146_buf *buf = (struct saa7146_buf *)vb;
223
224         int err = 0;
225         int lines, llength, size;
226
227         lines   = 16 * 2 ; /* 2 fields */
228         llength = vbi_pixel_to_capture;
229         size = lines * llength;
230
231         DEB_VBI(("vb:%p\n",vb));
232
233         if (0 != buf->vb.baddr  &&  buf->vb.bsize < size) {
234                 DEB_VBI(("size mismatch.\n"));
235                 return -EINVAL;
236         }
237
238         if (buf->vb.size != size)
239                 saa7146_dma_free(dev,q,buf);
240
241         if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
242                 struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
243
244                 buf->vb.width  = llength;
245                 buf->vb.height = lines;
246                 buf->vb.size   = size;
247                 buf->vb.field  = field; // FIXME: check this
248
249                 saa7146_pgtable_free(dev->pci, &buf->pt[2]);
250                 saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
251
252                 err = videobuf_iolock(q,&buf->vb, NULL);
253                 if (err)
254                         goto oops;
255                 err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
256                                                  dma->sglist, dma->sglen);
257                 if (0 != err)
258                         return err;
259         }
260         buf->vb.state = VIDEOBUF_PREPARED;
261         buf->activate = buffer_activate;
262
263         return 0;
264
265  oops:
266         DEB_VBI(("error out.\n"));
267         saa7146_dma_free(dev,q,buf);
268
269         return err;
270 }
271
272 static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
273 {
274         int llength,lines;
275
276         lines   = 16 * 2 ; /* 2 fields */
277         llength = vbi_pixel_to_capture;
278
279         *size = lines * llength;
280         *count = 2;
281
282         DEB_VBI(("count:%d, size:%d\n",*count,*size));
283
284         return 0;
285 }
286
287 static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
288 {
289         struct file *file = q->priv_data;
290         struct saa7146_fh *fh = file->private_data;
291         struct saa7146_dev *dev = fh->dev;
292         struct saa7146_vv *vv = dev->vv_data;
293         struct saa7146_buf *buf = (struct saa7146_buf *)vb;
294
295         DEB_VBI(("vb:%p\n",vb));
296         saa7146_buffer_queue(dev,&vv->vbi_q,buf);
297 }
298
299 static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
300 {
301         struct file *file = q->priv_data;
302         struct saa7146_fh *fh   = file->private_data;
303         struct saa7146_dev *dev = fh->dev;
304         struct saa7146_buf *buf = (struct saa7146_buf *)vb;
305
306         DEB_VBI(("vb:%p\n",vb));
307         saa7146_dma_free(dev,q,buf);
308 }
309
310 static struct videobuf_queue_ops vbi_qops = {
311         .buf_setup    = buffer_setup,
312         .buf_prepare  = buffer_prepare,
313         .buf_queue    = buffer_queue,
314         .buf_release  = buffer_release,
315 };
316
317 /* ------------------------------------------------------------------ */
318
319 static void vbi_stop(struct saa7146_fh *fh, struct file *file)
320 {
321         struct saa7146_dev *dev = fh->dev;
322         struct saa7146_vv *vv = dev->vv_data;
323         unsigned long flags;
324         DEB_VBI(("dev:%p, fh:%p\n",dev, fh));
325
326         spin_lock_irqsave(&dev->slock,flags);
327
328         /* disable rps1  */
329         saa7146_write(dev, MC1, MASK_29);
330
331         /* disable rps1 irqs */
332         SAA7146_IER_DISABLE(dev, MASK_28);
333
334         /* shut down dma 3 transfers */
335         saa7146_write(dev, MC1, MASK_20);
336
337         if (vv->vbi_q.curr) {
338                 saa7146_buffer_finish(dev,&vv->vbi_q,VIDEOBUF_DONE);
339         }
340
341         videobuf_queue_cancel(&fh->vbi_q);
342
343         vv->vbi_streaming = NULL;
344
345         del_timer(&vv->vbi_q.timeout);
346         del_timer(&fh->vbi_read_timeout);
347
348         spin_unlock_irqrestore(&dev->slock, flags);
349 }
350
351 static void vbi_read_timeout(unsigned long data)
352 {
353         struct file *file = (struct file*)data;
354         struct saa7146_fh *fh = file->private_data;
355         struct saa7146_dev *dev = fh->dev;
356
357         DEB_VBI(("dev:%p, fh:%p\n",dev, fh));
358
359         vbi_stop(fh, file);
360 }
361
362 static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
363 {
364         DEB_VBI(("dev:%p\n",dev));
365
366         INIT_LIST_HEAD(&vv->vbi_q.queue);
367
368         init_timer(&vv->vbi_q.timeout);
369         vv->vbi_q.timeout.function = saa7146_buffer_timeout;
370         vv->vbi_q.timeout.data     = (unsigned long)(&vv->vbi_q);
371         vv->vbi_q.dev              = dev;
372
373         init_waitqueue_head(&vv->vbi_wq);
374 }
375
376 static int vbi_open(struct saa7146_dev *dev, struct file *file)
377 {
378         struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
379
380         u32 arbtr_ctrl  = saa7146_read(dev, PCI_BT_V1);
381         int ret = 0;
382
383         DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
384
385         ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS);
386         if (0 == ret) {
387                 DEB_S(("cannot get vbi RESOURCE_DMA3_BRS resource\n"));
388                 return -EBUSY;
389         }
390
391         /* adjust arbitrition control for video dma 3 */
392         arbtr_ctrl &= ~0x1f0000;
393         arbtr_ctrl |=  0x1d0000;
394         saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
395         saa7146_write(dev, MC2, (MASK_04|MASK_20));
396
397         memset(&fh->vbi_fmt,0,sizeof(fh->vbi_fmt));
398
399         fh->vbi_fmt.sampling_rate       = 27000000;
400         fh->vbi_fmt.offset              = 248; /* todo */
401         fh->vbi_fmt.samples_per_line    = vbi_pixel_to_capture;
402         fh->vbi_fmt.sample_format       = V4L2_PIX_FMT_GREY;
403
404         /* fixme: this only works for PAL */
405         fh->vbi_fmt.start[0] = 5;
406         fh->vbi_fmt.count[0] = 16;
407         fh->vbi_fmt.start[1] = 312;
408         fh->vbi_fmt.count[1] = 16;
409
410         videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops,
411                             &dev->pci->dev, &dev->slock,
412                             V4L2_BUF_TYPE_VBI_CAPTURE,
413                             V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
414                             sizeof(struct saa7146_buf),
415                             file);
416
417         init_timer(&fh->vbi_read_timeout);
418         fh->vbi_read_timeout.function = vbi_read_timeout;
419         fh->vbi_read_timeout.data = (unsigned long)file;
420
421         /* initialize the brs */
422         if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
423                 saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19));
424         } else {
425                 saa7146_write(dev, BRS_CTRL, 0x00000001);
426
427                 if (0 != (ret = vbi_workaround(dev))) {
428                         DEB_VBI(("vbi workaround failed!\n"));
429                         /* return ret;*/
430                 }
431         }
432
433         /* upload brs register */
434         saa7146_write(dev, MC2, (MASK_08|MASK_24));
435         return 0;
436 }
437
438 static void vbi_close(struct saa7146_dev *dev, struct file *file)
439 {
440         struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
441         struct saa7146_vv *vv = dev->vv_data;
442         DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
443
444         if( fh == vv->vbi_streaming ) {
445                 vbi_stop(fh, file);
446         }
447         saa7146_res_free(fh, RESOURCE_DMA3_BRS);
448 }
449
450 static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status)
451 {
452         struct saa7146_vv *vv = dev->vv_data;
453         spin_lock(&dev->slock);
454
455         if (vv->vbi_q.curr) {
456                 DEB_VBI(("dev:%p, curr:%p\n",dev,vv->vbi_q.curr));
457                 /* this must be += 2, one count for each field */
458                 vv->vbi_fieldcount+=2;
459                 vv->vbi_q.curr->vb.field_count = vv->vbi_fieldcount;
460                 saa7146_buffer_finish(dev,&vv->vbi_q,VIDEOBUF_DONE);
461         } else {
462                 DEB_VBI(("dev:%p\n",dev));
463         }
464         saa7146_buffer_next(dev,&vv->vbi_q,1);
465
466         spin_unlock(&dev->slock);
467 }
468
469 static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
470 {
471         struct saa7146_fh *fh = file->private_data;
472         struct saa7146_dev *dev = fh->dev;
473         struct saa7146_vv *vv = dev->vv_data;
474         ssize_t ret = 0;
475
476         DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
477
478         if( NULL == vv->vbi_streaming ) {
479                 // fixme: check if dma3 is available
480                 // fixme: activate vbi engine here if necessary. (really?)
481                 vv->vbi_streaming = fh;
482         }
483
484         if( fh != vv->vbi_streaming ) {
485                 DEB_VBI(("open %p is already using vbi capture.",vv->vbi_streaming));
486                 return -EBUSY;
487         }
488
489         mod_timer(&fh->vbi_read_timeout, jiffies+BUFFER_TIMEOUT);
490         ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1,
491                                    file->f_flags & O_NONBLOCK);
492 /*
493         printk("BASE_ODD3:      0x%08x\n", saa7146_read(dev, BASE_ODD3));
494         printk("BASE_EVEN3:     0x%08x\n", saa7146_read(dev, BASE_EVEN3));
495         printk("PROT_ADDR3:     0x%08x\n", saa7146_read(dev, PROT_ADDR3));
496         printk("PITCH3:         0x%08x\n", saa7146_read(dev, PITCH3));
497         printk("BASE_PAGE3:     0x%08x\n", saa7146_read(dev, BASE_PAGE3));
498         printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3));
499         printk("BRS_CTRL:       0x%08x\n", saa7146_read(dev, BRS_CTRL));
500 */
501         return ret;
502 }
503
504 struct saa7146_use_ops saa7146_vbi_uops = {
505         .init           = vbi_init,
506         .open           = vbi_open,
507         .release        = vbi_close,
508         .irq_done       = vbi_irq_done,
509         .read           = vbi_read,
510 };