git.oblomov.eu Git - linux-2.6/blob - drivers/ide/ide.c

   1 /*
   2  *  linux/drivers/ide/ide.c             Version 7.00beta2       Mar 05 2003
   3  *
   4  *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below)
   5  */
   6
   7 /*
   8  *  Mostly written by Mark Lord  <mlord@pobox.com>
   9  *                and Gadi Oxman <gadio@netvision.net.il>
  10  *                and Andre Hedrick <andre@linux-ide.org>
  11  *
  12  *  See linux/MAINTAINERS for address of current maintainer.
  13  *
  14  * This is the multiple IDE interface driver, as evolved from hd.c.
  15  * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
  16  *   (usually 14 & 15).
  17  * There can be up to two drives per interface, as per the ATA-2 spec.
  18  *
  19  * Primary:    ide0, port 0x1f0; major=3;  hda is minor=0; hdb is minor=64
  20  * Secondary:  ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
  21  * Tertiary:   ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
  22  * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
  23  * ...
  24  *
  25  *  From hd.c:
  26  *  |
  27  *  | It traverses the request-list, using interrupts to jump between functions.
  28  *  | As nearly all functions can be called within interrupts, we may not sleep.
  29  *  | Special care is recommended.  Have Fun!
  30  *  |
  31  *  | modified by Drew Eckhardt to check nr of hd's from the CMOS.
  32  *  |
  33  *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
  34  *  | in the early extended-partition checks and added DM partitions.
  35  *  |
  36  *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
  37  *  |
  38  *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
  39  *  | and general streamlining by Mark Lord (mlord@pobox.com).
  40  *
  41  *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
  42  *
  43  *      Mark Lord       (mlord@pobox.com)               (IDE Perf.Pkg)
  44  *      Delman Lee      (delman@ieee.org)               ("Mr. atdisk2")
  45  *      Scott Snyder    (snyder@fnald0.fnal.gov)        (ATAPI IDE cd-rom)
  46  *
  47  *  This was a rewrite of just about everything from hd.c, though some original
  48  *  code is still sprinkled about.  Think of it as a major evolution, with
  49  *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
  50  *
  51  *  Version 1.0 ALPHA   initial code, primary i/f working okay
  52  *  Version 1.3 BETA    dual i/f on shared irq tested & working!
  53  *  Version 1.4 BETA    added auto probing for irq(s)
  54  *  Version 1.5 BETA    added ALPHA (untested) support for IDE cd-roms,
  55  *  ...
  56  * Version 5.50         allow values as small as 20 for idebus=
  57  * Version 5.51         force non io_32bit in drive_cmd_intr()
  58  *                      change delay_10ms() to delay_50ms() to fix problems
  59  * Version 5.52         fix incorrect invalidation of removable devices
  60  *                      add "hdx=slow" command line option
  61  * Version 5.60         start to modularize the driver; the disk and ATAPI
  62  *                       drivers can be compiled as loadable modules.
  63  *                      move IDE probe code to ide-probe.c
  64  *                      move IDE disk code to ide-disk.c
  65  *                      add support for generic IDE device subdrivers
  66  *                      add m68k code from Geert Uytterhoeven
  67  *                      probe all interfaces by default
  68  *                      add ioctl to (re)probe an interface
  69  * Version 6.00         use per device request queues
  70  *                      attempt to optimize shared hwgroup performance
  71  *                      add ioctl to manually adjust bandwidth algorithms
  72  *                      add kerneld support for the probe module
  73  *                      fix bug in ide_error()
  74  *                      fix bug in the first ide_get_lock() call for Atari
  75  *                      don't flush leftover data for ATAPI devices
  76  * Version 6.01         clear hwgroup->active while the hwgroup sleeps
  77  *                      support HDIO_GETGEO for floppies
  78  * Version 6.02         fix ide_ack_intr() call
  79  *                      check partition table on floppies
  80  * Version 6.03         handle bad status bit sequencing in ide_wait_stat()
  81  * Version 6.10         deleted old entries from this list of updates
  82  *                      replaced triton.c with ide-dma.c generic PCI DMA
  83  *                      added support for BIOS-enabled UltraDMA
  84  *                      rename all "promise" things to "pdc4030"
  85  *                      fix EZ-DRIVE handling on small disks
  86  * Version 6.11         fix probe error in ide_scan_devices()
  87  *                      fix ancient "jiffies" polling bugs
  88  *                      mask all hwgroup interrupts on each irq entry
  89  * Version 6.12         integrate ioctl and proc interfaces
  90  *                      fix parsing of "idex=" command line parameter
  91  * Version 6.13         add support for ide4/ide5 courtesy rjones@orchestream.com
  92  * Version 6.14         fixed IRQ sharing among PCI devices
  93  * Version 6.15         added SMP awareness to IDE drivers
  94  * Version 6.16         fixed various bugs; even more SMP friendly
  95  * Version 6.17         fix for newest EZ-Drive problem
  96  * Version 6.18         default unpartitioned-disk translation now "BIOS LBA"
  97  * Version 6.19         Re-design for a UNIFORM driver for all platforms,
  98  *                        model based on suggestions from Russell King and
  99  *                        Geert Uytterhoeven
 100  *                      Promise DC4030VL now supported.
 101  *                      add support for ide6/ide7
 102  *                      delay_50ms() changed to ide_delay_50ms() and exported.
 103  * Version 6.20         Added/Fixed Generic ATA-66 support and hwif detection.
 104  *                      Added hdx=flash to allow for second flash disk
 105  *                        detection w/o the hang loop.
 106  *                      Added support for ide8/ide9
 107  *                      Added idex=ata66 for the quirky chipsets that are
 108  *                        ATA-66 compliant, but have yet to determine a method
 109  *                        of verification of the 80c cable presence.
 110  *                        Specifically Promise's PDC20262 chipset.
 111  * Version 6.21         Fixing/Fixed SMP spinlock issue with insight from an old
 112  *                        hat that clarified original low level driver design.
 113  * Version 6.30         Added SMP support; fixed multmode issues.  -ml
 114  * Version 6.31         Debug Share INTR's and request queue streaming
 115  *                      Native ATA-100 support
 116  *                      Prep for Cascades Project
 117  * Version 7.00alpha    First named revision of ide rearrange
 118  *
 119  *  Some additional driver compile-time options are in ./include/linux/ide.h
 120  *
 121  *  To do, in likely order of completion:
 122  *      - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
 123  *
 124  */
 125
 126 #define REVISION        "Revision: 7.00alpha2"
 127 #define VERSION         "Id: ide.c 7.00a2 20020906"
 128
 129 #undef REALLY_SLOW_IO           /* most systems can safely undef this */
 130
 131 #define _IDE_C                  /* Tell ide.h it's really us */
 132
 133 #include <linux/config.h>
 134 #include <linux/module.h>
 135 #include <linux/types.h>
 136 #include <linux/string.h>
 137 #include <linux/kernel.h>
 138 #include <linux/timer.h>
 139 #include <linux/mm.h>
 140 #include <linux/interrupt.h>
 141 #include <linux/major.h>
 142 #include <linux/errno.h>
 143 #include <linux/genhd.h>
 144 #include <linux/blkpg.h>
 145 #include <linux/slab.h>
 146 #include <linux/init.h>
 147 #include <linux/pci.h>
 148 #include <linux/delay.h>
 149 #include <linux/ide.h>
 150 #include <linux/devfs_fs_kernel.h>
 151 #include <linux/completion.h>
 152 #include <linux/reboot.h>
 153 #include <linux/cdrom.h>
 154 #include <linux/seq_file.h>
 155 #include <linux/device.h>
 156 #include <linux/bitops.h>
 157
 158 #include <asm/byteorder.h>
 159 #include <asm/irq.h>
 160 #include <asm/uaccess.h>
 161 #include <asm/io.h>
 162
 163
 164 /* default maximum number of failures */
 165 #define IDE_DEFAULT_MAX_FAILURES        1
 166
 167 static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
 168                                         IDE2_MAJOR, IDE3_MAJOR,
 169                                         IDE4_MAJOR, IDE5_MAJOR,
 170                                         IDE6_MAJOR, IDE7_MAJOR,
 171                                         IDE8_MAJOR, IDE9_MAJOR };
 172
 173 static int idebus_parameter;    /* holds the "idebus=" parameter */
 174 static int system_bus_speed;    /* holds what we think is VESA/PCI bus speed */
 175 static int initializing;        /* set while initializing built-in drivers */
 176
 177 DECLARE_MUTEX(ide_cfg_sem);
 178  __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
 179
 180 #ifdef CONFIG_BLK_DEV_IDEPCI
 181 static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
 182 #endif
 183
 184 #ifdef CONFIG_IDEDMA_AUTO
 185 int noautodma = 0;
 186 #else
 187 int noautodma = 1;
 188 #endif
 189
 190 EXPORT_SYMBOL(noautodma);
 191
 192 /*
 193  * This is declared extern in ide.h, for access by other IDE modules:
 194  */
 195 ide_hwif_t ide_hwifs[MAX_HWIFS];        /* master data repository */
 196
 197 EXPORT_SYMBOL(ide_hwifs);
 198
 199 /*
 200  * Do not even *think* about calling this!
 201  */
 202 static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
 203 {
 204         unsigned int unit;
 205
 206         /* bulk initialize hwif & drive info with zeros */
 207         memset(hwif, 0, sizeof(ide_hwif_t));
 208
 209         /* fill in any non-zero initial values */
 210         hwif->index     = index;
 211         hwif->major     = ide_hwif_to_major[index];
 212
 213         hwif->name[0]   = 'i';
 214         hwif->name[1]   = 'd';
 215         hwif->name[2]   = 'e';
 216         hwif->name[3]   = '0' + index;
 217
 218         hwif->bus_state = BUSSTATE_ON;
 219
 220         hwif->atapi_dma = 0;            /* disable all atapi dma */
 221         hwif->ultra_mask = 0x80;        /* disable all ultra */
 222         hwif->mwdma_mask = 0x80;        /* disable all mwdma */
 223         hwif->swdma_mask = 0x80;        /* disable all swdma */
 224
 225         sema_init(&hwif->gendev_rel_sem, 0);
 226
 227         default_hwif_iops(hwif);
 228         default_hwif_transport(hwif);
 229         for (unit = 0; unit < MAX_DRIVES; ++unit) {
 230                 ide_drive_t *drive = &hwif->drives[unit];
 231
 232                 drive->media                    = ide_disk;
 233                 drive->select.all               = (unit<<4)|0xa0;
 234                 drive->hwif                     = hwif;
 235                 drive->ctl                      = 0x08;
 236                 drive->ready_stat               = READY_STAT;
 237                 drive->bad_wstat                = BAD_W_STAT;
 238                 drive->special.b.recalibrate    = 1;
 239                 drive->special.b.set_geometry   = 1;
 240                 drive->name[0]                  = 'h';
 241                 drive->name[1]                  = 'd';
 242                 drive->name[2]                  = 'a' + (index * MAX_DRIVES) + unit;
 243                 drive->max_failures             = IDE_DEFAULT_MAX_FAILURES;
 244                 drive->using_dma                = 0;
 245                 drive->is_flash                 = 0;
 246                 drive->vdma                     = 0;
 247                 INIT_LIST_HEAD(&drive->list);
 248                 sema_init(&drive->gendev_rel_sem, 0);
 249         }
 250 }
 251
 252 static void init_hwif_default(ide_hwif_t *hwif, unsigned int index)
 253 {
 254         hw_regs_t hw;
 255
 256         memset(&hw, 0, sizeof(hw_regs_t));
 257
 258         ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq);
 259
 260         memcpy(&hwif->hw, &hw, sizeof(hw));
 261         memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
 262
 263         hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
 264 #ifdef CONFIG_BLK_DEV_HD
 265         if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA)
 266                 hwif->noprobe = 1;      /* may be overridden by ide_setup() */
 267 #endif
 268 }
 269
 270 extern void ide_arm_init(void);
 271
 272 /*
 273  * init_ide_data() sets reasonable default values into all fields
 274  * of all instances of the hwifs and drives, but only on the first call.
 275  * Subsequent calls have no effect (they don't wipe out anything).
 276  *
 277  * This routine is normally called at driver initialization time,
 278  * but may also be called MUCH earlier during kernel "command-line"
 279  * parameter processing.  As such, we cannot depend on any other parts
 280  * of the kernel (such as memory allocation) to be functioning yet.
 281  *
 282  * This is too bad, as otherwise we could dynamically allocate the
 283  * ide_drive_t structs as needed, rather than always consuming memory
 284  * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
 285  *
 286  * FIXME: We should stuff the setup data into __init and copy the
 287  * relevant hwifs/allocate them properly during boot.
 288  */
 289 #define MAGIC_COOKIE 0x12345678
 290 static void __init init_ide_data (void)
 291 {
 292         ide_hwif_t *hwif;
 293         unsigned int index;
 294         static unsigned long magic_cookie = MAGIC_COOKIE;
 295
 296         if (magic_cookie != MAGIC_COOKIE)
 297                 return;         /* already initialized */
 298         magic_cookie = 0;
 299
 300         /* Initialise all interface structures */
 301         for (index = 0; index < MAX_HWIFS; ++index) {
 302                 hwif = &ide_hwifs[index];
 303                 init_hwif_data(hwif, index);
 304                 init_hwif_default(hwif, index);
 305 #if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI)
 306                 hwif->irq = hwif->hw.irq =
 307                         ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
 308 #endif
 309         }
 310 #ifdef CONFIG_IDE_ARM
 311         initializing = 1;
 312         ide_arm_init();
 313         initializing = 0;
 314 #endif
 315 }
 316
 317 /**
 318  *      ide_system_bus_speed    -       guess bus speed
 319  *
 320  *      ide_system_bus_speed() returns what we think is the system VESA/PCI
 321  *      bus speed (in MHz). This is used for calculating interface PIO timings.
 322  *      The default is 40 for known PCI systems, 50 otherwise.
 323  *      The "idebus=xx" parameter can be used to override this value.
 324  *      The actual value to be used is computed/displayed the first time
 325  *      through. Drivers should only use this as a last resort.
 326  *
 327  *      Returns a guessed speed in MHz.
 328  */
 329
 330 static int ide_system_bus_speed(void)
 331 {
 332 #ifdef CONFIG_PCI
 333         static struct pci_device_id pci_default[] = {
 334                 { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
 335                 { }
 336         };
 337 #else
 338 #define pci_default 0
 339 #endif /* CONFIG_PCI */
 340
 341         if (!system_bus_speed) {
 342                 if (idebus_parameter) {
 343                         /* user supplied value */
 344                         system_bus_speed = idebus_parameter;
 345                 } else if (pci_dev_present(pci_default)) {
 346                         /* safe default value for PCI */
 347                         system_bus_speed = 33;
 348                 } else {
 349                         /* safe default value for VESA and PCI */
 350                         system_bus_speed = 50;
 351                 }
 352                 printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
 353                         "for PIO modes%s\n", system_bus_speed,
 354                         idebus_parameter ? "" : "; override with idebus=xx");
 355         }
 356         return system_bus_speed;
 357 }
 358
 359 #ifdef CONFIG_PROC_FS
 360 struct proc_dir_entry *proc_ide_root;
 361 #endif
 362
 363 static struct resource* hwif_request_region(ide_hwif_t *hwif,
 364                                             unsigned long addr, int num)
 365 {
 366         struct resource *res = request_region(addr, num, hwif->name);
 367
 368         if (!res)
 369                 printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
 370                                 hwif->name, addr, addr+num-1);
 371         return res;
 372 }
 373
 374 /**
 375  *      ide_hwif_request_regions - request resources for IDE
 376  *      @hwif: interface to use
 377  *
 378  *      Requests all the needed resources for an interface.
 379  *      Right now core IDE code does this work which is deeply wrong.
 380  *      MMIO leaves it to the controller driver,
 381  *      PIO will migrate this way over time.
 382  */
 383
 384 int ide_hwif_request_regions(ide_hwif_t *hwif)
 385 {
 386         unsigned long addr;
 387         unsigned int i;
 388
 389         if (hwif->mmio == 2)
 390                 return 0;
 391         BUG_ON(hwif->mmio == 1);
 392         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
 393         if (addr && !hwif_request_region(hwif, addr, 1))
 394                 goto control_region_busy;
 395         hwif->straight8 = 0;
 396         addr = hwif->io_ports[IDE_DATA_OFFSET];
 397         if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) {
 398                 if (!hwif_request_region(hwif, addr, 8))
 399                         goto data_region_busy;
 400                 hwif->straight8 = 1;
 401                 return 0;
 402         }
 403         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
 404                 addr = hwif->io_ports[i];
 405                 if (!hwif_request_region(hwif, addr, 1)) {
 406                         while (--i)
 407                                 release_region(addr, 1);
 408                         goto data_region_busy;
 409                 }
 410         }
 411         return 0;
 412
 413 data_region_busy:
 414         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
 415         if (addr)
 416                 release_region(addr, 1);
 417 control_region_busy:
 418         /* If any errors are return, we drop the hwif interface. */
 419         return -EBUSY;
 420 }
 421
 422 /**
 423  *      ide_hwif_release_regions - free IDE resources
 424  *
 425  *      Note that we only release the standard ports,
 426  *      and do not even try to handle any extra ports
 427  *      allocated for weird IDE interface chipsets.
 428  *
 429  *      Note also that we don't yet handle mmio resources here. More
 430  *      importantly our caller should be doing this so we need to
 431  *      restructure this as a helper function for drivers.
 432  */
 433
 434 void ide_hwif_release_regions(ide_hwif_t *hwif)
 435 {
 436         u32 i = 0;
 437
 438         if (hwif->mmio == 2)
 439                 return;
 440         if (hwif->io_ports[IDE_CONTROL_OFFSET])
 441                 release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
 442         if (hwif->straight8) {
 443                 release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
 444                 return;
 445         }
 446         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
 447                 if (hwif->io_ports[i])
 448                         release_region(hwif->io_ports[i], 1);
 449 }
 450
 451 /**
 452  *      ide_hwif_restore        -       restore hwif to template
 453  *      @hwif: hwif to update
 454  *      @tmp_hwif: template
 455  *
 456  *      Restore hwif to a previous state by copying most settngs
 457  *      from the template.
 458  */
 459
 460 static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 461 {
 462         hwif->hwgroup                   = tmp_hwif->hwgroup;
 463
 464         hwif->gendev.parent             = tmp_hwif->gendev.parent;
 465
 466         hwif->proc                      = tmp_hwif->proc;
 467
 468         hwif->major                     = tmp_hwif->major;
 469         hwif->straight8                 = tmp_hwif->straight8;
 470         hwif->bus_state                 = tmp_hwif->bus_state;
 471
 472         hwif->atapi_dma                 = tmp_hwif->atapi_dma;
 473         hwif->ultra_mask                = tmp_hwif->ultra_mask;
 474         hwif->mwdma_mask                = tmp_hwif->mwdma_mask;
 475         hwif->swdma_mask                = tmp_hwif->swdma_mask;
 476
 477         hwif->chipset                   = tmp_hwif->chipset;
 478         hwif->hold                      = tmp_hwif->hold;
 479
 480 #ifdef CONFIG_BLK_DEV_IDEPCI
 481         hwif->pci_dev                   = tmp_hwif->pci_dev;
 482         hwif->cds                       = tmp_hwif->cds;
 483 #endif
 484
 485         hwif->tuneproc                  = tmp_hwif->tuneproc;
 486         hwif->speedproc                 = tmp_hwif->speedproc;
 487         hwif->selectproc                = tmp_hwif->selectproc;
 488         hwif->reset_poll                = tmp_hwif->reset_poll;
 489         hwif->pre_reset                 = tmp_hwif->pre_reset;
 490         hwif->resetproc                 = tmp_hwif->resetproc;
 491         hwif->intrproc                  = tmp_hwif->intrproc;
 492         hwif->maskproc                  = tmp_hwif->maskproc;
 493         hwif->quirkproc                 = tmp_hwif->quirkproc;
 494         hwif->busproc                   = tmp_hwif->busproc;
 495
 496         hwif->ata_input_data            = tmp_hwif->ata_input_data;
 497         hwif->ata_output_data           = tmp_hwif->ata_output_data;
 498         hwif->atapi_input_bytes         = tmp_hwif->atapi_input_bytes;
 499         hwif->atapi_output_bytes        = tmp_hwif->atapi_output_bytes;
 500
 501         hwif->dma_setup                 = tmp_hwif->dma_setup;
 502         hwif->dma_exec_cmd              = tmp_hwif->dma_exec_cmd;
 503         hwif->dma_start                 = tmp_hwif->dma_start;
 504         hwif->ide_dma_end               = tmp_hwif->ide_dma_end;
 505         hwif->ide_dma_check             = tmp_hwif->ide_dma_check;
 506         hwif->ide_dma_on                = tmp_hwif->ide_dma_on;
 507         hwif->ide_dma_off_quietly       = tmp_hwif->ide_dma_off_quietly;
 508         hwif->ide_dma_test_irq          = tmp_hwif->ide_dma_test_irq;
 509         hwif->ide_dma_host_on           = tmp_hwif->ide_dma_host_on;
 510         hwif->ide_dma_host_off          = tmp_hwif->ide_dma_host_off;
 511         hwif->ide_dma_lostirq           = tmp_hwif->ide_dma_lostirq;
 512         hwif->ide_dma_timeout           = tmp_hwif->ide_dma_timeout;
 513
 514         hwif->OUTB                      = tmp_hwif->OUTB;
 515         hwif->OUTBSYNC                  = tmp_hwif->OUTBSYNC;
 516         hwif->OUTW                      = tmp_hwif->OUTW;
 517         hwif->OUTL                      = tmp_hwif->OUTL;
 518         hwif->OUTSW                     = tmp_hwif->OUTSW;
 519         hwif->OUTSL                     = tmp_hwif->OUTSL;
 520
 521         hwif->INB                       = tmp_hwif->INB;
 522         hwif->INW                       = tmp_hwif->INW;
 523         hwif->INL                       = tmp_hwif->INL;
 524         hwif->INSW                      = tmp_hwif->INSW;
 525         hwif->INSL                      = tmp_hwif->INSL;
 526
 527         hwif->sg_max_nents              = tmp_hwif->sg_max_nents;
 528
 529         hwif->mmio                      = tmp_hwif->mmio;
 530         hwif->rqsize                    = tmp_hwif->rqsize;
 531         hwif->no_lba48                  = tmp_hwif->no_lba48;
 532
 533 #ifndef CONFIG_BLK_DEV_IDECS
 534         hwif->irq                       = tmp_hwif->irq;
 535 #endif
 536
 537         hwif->dma_base                  = tmp_hwif->dma_base;
 538         hwif->dma_master                = tmp_hwif->dma_master;
 539         hwif->dma_command               = tmp_hwif->dma_command;
 540         hwif->dma_vendor1               = tmp_hwif->dma_vendor1;
 541         hwif->dma_status                = tmp_hwif->dma_status;
 542         hwif->dma_vendor3               = tmp_hwif->dma_vendor3;
 543         hwif->dma_prdtable              = tmp_hwif->dma_prdtable;
 544
 545         hwif->dma_extra                 = tmp_hwif->dma_extra;
 546         hwif->config_data               = tmp_hwif->config_data;
 547         hwif->select_data               = tmp_hwif->select_data;
 548         hwif->autodma                   = tmp_hwif->autodma;
 549         hwif->udma_four                 = tmp_hwif->udma_four;
 550         hwif->no_dsc                    = tmp_hwif->no_dsc;
 551
 552         hwif->hwif_data                 = tmp_hwif->hwif_data;
 553 }
 554
 555 /**
 556  *      ide_unregister          -       free an ide interface
 557  *      @index: index of interface (will change soon to a pointer)
 558  *
 559  *      Perform the final unregister of an IDE interface. At the moment
 560  *      we don't refcount interfaces so this will also get split up.
 561  *
 562  *      Locking:
 563  *      The caller must not hold the IDE locks
 564  *      The drive present/vanishing is not yet properly locked
 565  *      Take care with the callbacks. These have been split to avoid
 566  *      deadlocking the IDE layer. The shutdown callback is called
 567  *      before we take the lock and free resources. It is up to the
 568  *      caller to be sure there is no pending I/O here, and that
 569  *      the interfce will not be reopened (present/vanishing locking
 570  *      isnt yet done btw). After we commit to the final kill we
 571  *      call the cleanup callback with the ide locks held.
 572  *
 573  *      Unregister restores the hwif structures to the default state.
 574  *      This is raving bonkers.
 575  */
 576
 577 void ide_unregister(unsigned int index)
 578 {
 579         ide_drive_t *drive;
 580         ide_hwif_t *hwif, *g;
 581         static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */
 582         ide_hwgroup_t *hwgroup;
 583         int irq_count = 0, unit;
 584
 585         BUG_ON(index >= MAX_HWIFS);
 586
 587         BUG_ON(in_interrupt());
 588         BUG_ON(irqs_disabled());
 589         down(&ide_cfg_sem);
 590         spin_lock_irq(&ide_lock);
 591         hwif = &ide_hwifs[index];
 592         if (!hwif->present)
 593                 goto abort;
 594         for (unit = 0; unit < MAX_DRIVES; ++unit) {
 595                 drive = &hwif->drives[unit];
 596                 if (!drive->present) {
 597                         if (drive->devfs_name[0] != '\0') {
 598                                 devfs_remove(drive->devfs_name);
 599                                 drive->devfs_name[0] = '\0';
 600                         }
 601                         continue;
 602                 }
 603                 spin_unlock_irq(&ide_lock);
 604                 device_unregister(&drive->gendev);
 605                 down(&drive->gendev_rel_sem);
 606                 spin_lock_irq(&ide_lock);
 607         }
 608         hwif->present = 0;
 609
 610         spin_unlock_irq(&ide_lock);
 611
 612         destroy_proc_ide_interface(hwif);
 613
 614         hwgroup = hwif->hwgroup;
 615         /*
 616          * free the irq if we were the only hwif using it
 617          */
 618         g = hwgroup->hwif;
 619         do {
 620                 if (g->irq == hwif->irq)
 621                         ++irq_count;
 622                 g = g->next;
 623         } while (g != hwgroup->hwif);
 624         if (irq_count == 1)
 625                 free_irq(hwif->irq, hwgroup);
 626
 627         spin_lock_irq(&ide_lock);
 628         /*
 629          * Note that we only release the standard ports,
 630          * and do not even try to handle any extra ports
 631          * allocated for weird IDE interface chipsets.
 632          */
 633         ide_hwif_release_regions(hwif);
 634
 635         /*
 636          * Remove us from the hwgroup, and free
 637          * the hwgroup if we were the only member
 638          */
 639         if (hwif->next == hwif) {
 640                 BUG_ON(hwgroup->hwif != hwif);
 641                 kfree(hwgroup);
 642         } else {
 643                 /* There is another interface in hwgroup.
 644                  * Unlink us, and set hwgroup->drive and ->hwif to
 645                  * something sane.
 646                  */
 647                 g = hwgroup->hwif;
 648                 while (g->next != hwif)
 649                         g = g->next;
 650                 g->next = hwif->next;
 651                 if (hwgroup->hwif == hwif) {
 652                         /* Chose a random hwif for hwgroup->hwif.
 653                          * It's guaranteed that there are no drives
 654                          * left in the hwgroup.
 655                          */
 656                         BUG_ON(hwgroup->drive != NULL);
 657                         hwgroup->hwif = g;
 658                 }
 659                 BUG_ON(hwgroup->hwif == hwif);
 660         }
 661
 662         /* More messed up locking ... */
 663         spin_unlock_irq(&ide_lock);
 664         device_unregister(&hwif->gendev);
 665         down(&hwif->gendev_rel_sem);
 666
 667         /*
 668          * Remove us from the kernel's knowledge
 669          */
 670         blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
 671         kfree(hwif->sg_table);
 672         unregister_blkdev(hwif->major, hwif->name);
 673         spin_lock_irq(&ide_lock);
 674
 675         if (hwif->dma_base) {
 676                 (void) ide_release_dma(hwif);
 677
 678                 hwif->dma_base = 0;
 679                 hwif->dma_master = 0;
 680                 hwif->dma_command = 0;
 681                 hwif->dma_vendor1 = 0;
 682                 hwif->dma_status = 0;
 683                 hwif->dma_vendor3 = 0;
 684                 hwif->dma_prdtable = 0;
 685         }
 686
 687         /* copy original settings */
 688         tmp_hwif = *hwif;
 689
 690         /* restore hwif data to pristine status */
 691         init_hwif_data(hwif, index);
 692         init_hwif_default(hwif, index);
 693
 694         ide_hwif_restore(hwif, &tmp_hwif);
 695
 696 abort:
 697         spin_unlock_irq(&ide_lock);
 698         up(&ide_cfg_sem);
 699 }
 700
 701 EXPORT_SYMBOL(ide_unregister);
 702
 703
 704 /**
 705  *      ide_setup_ports         -       set up IDE interface ports
 706  *      @hw: register descriptions
 707  *      @base: base register
 708  *      @offsets: table of register offsets
 709  *      @ctrl: control register
 710  *      @ack_irq: IRQ ack
 711  *      @irq: interrupt lie
 712  *
 713  *      Setup hw_regs_t structure described by parameters.  You
 714  *      may set up the hw structure yourself OR use this routine to
 715  *      do it for you. This is basically a helper
 716  *
 717  */
 718
 719 void ide_setup_ports (  hw_regs_t *hw,
 720                         unsigned long base, int *offsets,
 721                         unsigned long ctrl, unsigned long intr,
 722                         ide_ack_intr_t *ack_intr,
 723 /*
 724  *                      ide_io_ops_t *iops,
 725  */
 726                         int irq)
 727 {
 728         int i;
 729
 730         for (i = 0; i < IDE_NR_PORTS; i++) {
 731                 if (offsets[i] == -1) {
 732                         switch(i) {
 733                                 case IDE_CONTROL_OFFSET:
 734                                         hw->io_ports[i] = ctrl;
 735                                         break;
 736 #if defined(CONFIG_AMIGA) || defined(CONFIG_MAC)
 737                                 case IDE_IRQ_OFFSET:
 738                                         hw->io_ports[i] = intr;
 739                                         break;
 740 #endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */
 741                                 default:
 742                                         hw->io_ports[i] = 0;
 743                                         break;
 744                         }
 745                 } else {
 746                         hw->io_ports[i] = base + offsets[i];
 747                 }
 748         }
 749         hw->irq = irq;
 750         hw->dma = NO_DMA;
 751         hw->ack_intr = ack_intr;
 752 /*
 753  *      hw->iops = iops;
 754  */
 755 }
 756
 757 /**
 758  *      ide_register_hw_with_fixup      -       register IDE interface
 759  *      @hw: hardware registers
 760  *      @hwifp: pointer to returned hwif
 761  *      @fixup: fixup function
 762  *
 763  *      Register an IDE interface, specifying exactly the registers etc.
 764  *      Set init=1 iff calling before probes have taken place.
 765  *
 766  *      Returns -1 on error.
 767  */
 768
 769 int ide_register_hw_with_fixup(hw_regs_t *hw, ide_hwif_t **hwifp, void(*fixup)(ide_hwif_t *hwif))
 770 {
 771         int index, retry = 1;
 772         ide_hwif_t *hwif;
 773
 774         do {
 775                 for (index = 0; index < MAX_HWIFS; ++index) {
 776                         hwif = &ide_hwifs[index];
 777                         if (hwif->hw.io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
 778                                 goto found;
 779                 }
 780                 for (index = 0; index < MAX_HWIFS; ++index) {
 781                         hwif = &ide_hwifs[index];
 782                         if (hwif->hold)
 783                                 continue;
 784                         if ((!hwif->present && !hwif->mate && !initializing) ||
 785                             (!hwif->hw.io_ports[IDE_DATA_OFFSET] && initializing))
 786                                 goto found;
 787                 }
 788                 for (index = 0; index < MAX_HWIFS; index++)
 789                         ide_unregister(index);
 790         } while (retry--);
 791         return -1;
 792 found:
 793         if (hwif->present)
 794                 ide_unregister(index);
 795         else if (!hwif->hold) {
 796                 init_hwif_data(hwif, index);
 797                 init_hwif_default(hwif, index);
 798         }
 799         if (hwif->present)
 800                 return -1;
 801         memcpy(&hwif->hw, hw, sizeof(*hw));
 802         memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
 803         hwif->irq = hw->irq;
 804         hwif->noprobe = 0;
 805         hwif->chipset = hw->chipset;
 806
 807         if (!initializing) {
 808                 probe_hwif_init_with_fixup(hwif, fixup);
 809                 create_proc_ide_interfaces();
 810         }
 811
 812         if (hwifp)
 813                 *hwifp = hwif;
 814
 815         return (initializing || hwif->present) ? index : -1;
 816 }
 817
 818 EXPORT_SYMBOL(ide_register_hw_with_fixup);
 819
 820 int ide_register_hw(hw_regs_t *hw, ide_hwif_t **hwifp)
 821 {
 822         return ide_register_hw_with_fixup(hw, hwifp, NULL);
 823 }
 824
 825 EXPORT_SYMBOL(ide_register_hw);
 826
 827 /*
 828  *      Locks for IDE setting functionality
 829  */
 830
 831 DECLARE_MUTEX(ide_setting_sem);
 832
 833 /**
 834  *      __ide_add_setting       -       add an ide setting option
 835  *      @drive: drive to use
 836  *      @name: setting name
 837  *      @rw: true if the function is read write
 838  *      @read_ioctl: function to call on read
 839  *      @write_ioctl: function to call on write
 840  *      @data_type: type of data
 841  *      @min: range minimum
 842  *      @max: range maximum
 843  *      @mul_factor: multiplication scale
 844  *      @div_factor: divison scale
 845  *      @data: private data field
 846  *      @set: setting
 847  *      @auto_remove: setting auto removal flag
 848  *
 849  *      Removes the setting named from the device if it is present.
 850  *      The function takes the settings_lock to protect against
 851  *      parallel changes. This function must not be called from IRQ
 852  *      context. Returns 0 on success or -1 on failure.
 853  *
 854  *      BUGS: This code is seriously over-engineered. There is also
 855  *      magic about how the driver specific features are setup. If
 856  *      a driver is attached we assume the driver settings are auto
 857  *      remove.
 858  */
 859
 860 static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
 861 {
 862         ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
 863
 864         down(&ide_setting_sem);
 865         while ((*p) && strcmp((*p)->name, name) < 0)
 866                 p = &((*p)->next);
 867         if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
 868                 goto abort;
 869         if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
 870                 goto abort;
 871         strcpy(setting->name, name);
 872         setting->rw = rw;
 873         setting->read_ioctl = read_ioctl;
 874         setting->write_ioctl = write_ioctl;
 875         setting->data_type = data_type;
 876         setting->min = min;
 877         setting->max = max;
 878         setting->mul_factor = mul_factor;
 879         setting->div_factor = div_factor;
 880         setting->data = data;
 881         setting->set = set;
 882
 883         setting->next = *p;
 884         if (auto_remove)
 885                 setting->auto_remove = 1;
 886         *p = setting;
 887         up(&ide_setting_sem);
 888         return 0;
 889 abort:
 890         up(&ide_setting_sem);
 891         kfree(setting);
 892         return -1;
 893 }
 894
 895 int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
 896 {
 897         return __ide_add_setting(drive, name, rw, read_ioctl, write_ioctl, data_type, min, max, mul_factor, div_factor, data, set, 1);
 898 }
 899
 900 EXPORT_SYMBOL(ide_add_setting);
 901
 902 /**
 903  *      __ide_remove_setting    -       remove an ide setting option
 904  *      @drive: drive to use
 905  *      @name: setting name
 906  *
 907  *      Removes the setting named from the device if it is present.
 908  *      The caller must hold the setting semaphore.
 909  */
 910
 911 static void __ide_remove_setting (ide_drive_t *drive, char *name)
 912 {
 913         ide_settings_t **p, *setting;
 914
 915         p = (ide_settings_t **) &drive->settings;
 916
 917         while ((*p) && strcmp((*p)->name, name))
 918                 p = &((*p)->next);
 919         if ((setting = (*p)) == NULL)
 920                 return;
 921
 922         (*p) = setting->next;
 923
 924         kfree(setting->name);
 925         kfree(setting);
 926 }
 927
 928 /**
 929  *      ide_find_setting_by_ioctl       -       find a drive specific ioctl
 930  *      @drive: drive to scan
 931  *      @cmd: ioctl command to handle
 932  *
 933  *      Scan's the device setting table for a matching entry and returns
 934  *      this or NULL if no entry is found. The caller must hold the
 935  *      setting semaphore
 936  */
 937
 938 static ide_settings_t *ide_find_setting_by_ioctl (ide_drive_t *drive, int cmd)
 939 {
 940         ide_settings_t *setting = drive->settings;
 941
 942         while (setting) {
 943                 if (setting->read_ioctl == cmd || setting->write_ioctl == cmd)
 944                         break;
 945                 setting = setting->next;
 946         }
 947
 948         return setting;
 949 }
 950
 951 /**
 952  *      ide_find_setting_by_name        -       find a drive specific setting
 953  *      @drive: drive to scan
 954  *      @name: setting name
 955  *
 956  *      Scan's the device setting table for a matching entry and returns
 957  *      this or NULL if no entry is found. The caller must hold the
 958  *      setting semaphore
 959  */
 960
 961 ide_settings_t *ide_find_setting_by_name (ide_drive_t *drive, char *name)
 962 {
 963         ide_settings_t *setting = drive->settings;
 964
 965         while (setting) {
 966                 if (strcmp(setting->name, name) == 0)
 967                         break;
 968                 setting = setting->next;
 969         }
 970         return setting;
 971 }
 972
 973 /**
 974  *      auto_remove_settings    -       remove driver specific settings
 975  *      @drive: drive
 976  *
 977  *      Automatically remove all the driver specific settings for this
 978  *      drive. This function may sleep and must not be called from IRQ
 979  *      context. The caller must hold ide_setting_sem.
 980  */
 981
 982 static void auto_remove_settings (ide_drive_t *drive)
 983 {
 984         ide_settings_t *setting;
 985 repeat:
 986         setting = drive->settings;
 987         while (setting) {
 988                 if (setting->auto_remove) {
 989                         __ide_remove_setting(drive, setting->name);
 990                         goto repeat;
 991                 }
 992                 setting = setting->next;
 993         }
 994 }
 995
 996 /**
 997  *      ide_read_setting        -       read an IDE setting
 998  *      @drive: drive to read from
 999  *      @setting: drive setting
1000  *
1001  *      Read a drive setting and return the value. The caller
1002  *      must hold the ide_setting_sem when making this call.
1003  *
1004  *      BUGS: the data return and error are the same return value
1005  *      so an error -EINVAL and true return of the same value cannot
1006  *      be told apart
1007  */
1008
1009 int ide_read_setting (ide_drive_t *drive, ide_settings_t *setting)
1010 {
1011         int             val = -EINVAL;
1012         unsigned long   flags;
1013
1014         if ((setting->rw & SETTING_READ)) {
1015                 spin_lock_irqsave(&ide_lock, flags);
1016                 switch(setting->data_type) {
1017                         case TYPE_BYTE:
1018                                 val = *((u8 *) setting->data);
1019                                 break;
1020                         case TYPE_SHORT:
1021                                 val = *((u16 *) setting->data);
1022                                 break;
1023                         case TYPE_INT:
1024                         case TYPE_INTA:
1025                                 val = *((u32 *) setting->data);
1026                                 break;
1027                 }
1028                 spin_unlock_irqrestore(&ide_lock, flags);
1029         }
1030         return val;
1031 }
1032
1033 /**
1034  *      ide_spin_wait_hwgroup   -       wait for group
1035  *      @drive: drive in the group
1036  *
1037  *      Wait for an IDE device group to go non busy and then return
1038  *      holding the ide_lock which guards the hwgroup->busy status
1039  *      and right to use it.
1040  */
1041
1042 int ide_spin_wait_hwgroup (ide_drive_t *drive)
1043 {
1044         ide_hwgroup_t *hwgroup = HWGROUP(drive);
1045         unsigned long timeout = jiffies + (3 * HZ);
1046
1047         spin_lock_irq(&ide_lock);
1048
1049         while (hwgroup->busy) {
1050                 unsigned long lflags;
1051                 spin_unlock_irq(&ide_lock);
1052                 local_irq_set(lflags);
1053                 if (time_after(jiffies, timeout)) {
1054                         local_irq_restore(lflags);
1055                         printk(KERN_ERR "%s: channel busy\n", drive->name);
1056                         return -EBUSY;
1057                 }
1058                 local_irq_restore(lflags);
1059                 spin_lock_irq(&ide_lock);
1060         }
1061         return 0;
1062 }
1063
1064 EXPORT_SYMBOL(ide_spin_wait_hwgroup);
1065
1066 /**
1067  *      ide_write_setting       -       read an IDE setting
1068  *      @drive: drive to read from
1069  *      @setting: drive setting
1070  *      @val: value
1071  *
1072  *      Write a drive setting if it is possible. The caller
1073  *      must hold the ide_setting_sem when making this call.
1074  *
1075  *      BUGS: the data return and error are the same return value
1076  *      so an error -EINVAL and true return of the same value cannot
1077  *      be told apart
1078  *
1079  *      FIXME:  This should be changed to enqueue a special request
1080  *      to the driver to change settings, and then wait on a sema for completion.
1081  *      The current scheme of polling is kludgy, though safe enough.
1082  */
1083
1084 int ide_write_setting (ide_drive_t *drive, ide_settings_t *setting, int val)
1085 {
1086         int i;
1087         u32 *p;
1088
1089         if (!capable(CAP_SYS_ADMIN))
1090                 return -EACCES;
1091         if (!(setting->rw & SETTING_WRITE))
1092                 return -EPERM;
1093         if (val < setting->min || val > setting->max)
1094                 return -EINVAL;
1095         if (setting->set)
1096                 return setting->set(drive, val);
1097         if (ide_spin_wait_hwgroup(drive))
1098                 return -EBUSY;
1099         switch (setting->data_type) {
1100                 case TYPE_BYTE:
1101                         *((u8 *) setting->data) = val;
1102                         break;
1103                 case TYPE_SHORT:
1104                         *((u16 *) setting->data) = val;
1105                         break;
1106                 case TYPE_INT:
1107                         *((u32 *) setting->data) = val;
1108                         break;
1109                 case TYPE_INTA:
1110                         p = (u32 *) setting->data;
1111                         for (i = 0; i < 1 << PARTN_BITS; i++, p++)
1112                                 *p = val;
1113                         break;
1114         }
1115         spin_unlock_irq(&ide_lock);
1116         return 0;
1117 }
1118
1119 static int set_io_32bit(ide_drive_t *drive, int arg)
1120 {
1121         drive->io_32bit = arg;
1122 #ifdef CONFIG_BLK_DEV_DTC2278
1123         if (HWIF(drive)->chipset == ide_dtc2278)
1124                 HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
1125 #endif /* CONFIG_BLK_DEV_DTC2278 */
1126         return 0;
1127 }
1128
1129 static int set_using_dma (ide_drive_t *drive, int arg)
1130 {
1131 #ifdef CONFIG_BLK_DEV_IDEDMA
1132         if (!drive->id || !(drive->id->capability & 1))
1133                 return -EPERM;
1134         if (HWIF(drive)->ide_dma_check == NULL)
1135                 return -EPERM;
1136         if (arg) {
1137                 if (HWIF(drive)->ide_dma_check(drive)) return -EIO;
1138                 if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
1139         } else {
1140                 if (__ide_dma_off(drive))
1141                         return -EIO;
1142         }
1143         return 0;
1144 #else
1145         return -EPERM;
1146 #endif
1147 }
1148
1149 static int set_pio_mode (ide_drive_t *drive, int arg)
1150 {
1151         struct request rq;
1152
1153         if (!HWIF(drive)->tuneproc)
1154                 return -ENOSYS;
1155         if (drive->special.b.set_tune)
1156                 return -EBUSY;
1157         ide_init_drive_cmd(&rq);
1158         drive->tune_req = (u8) arg;
1159         drive->special.b.set_tune = 1;
1160         (void) ide_do_drive_cmd(drive, &rq, ide_wait);
1161         return 0;
1162 }
1163
1164 static int set_xfer_rate (ide_drive_t *drive, int arg)
1165 {
1166         int err = ide_wait_cmd(drive,
1167                         WIN_SETFEATURES, (u8) arg,
1168                         SETFEATURES_XFER, 0, NULL);
1169
1170         if (!err && arg) {
1171                 ide_set_xfer_rate(drive, (u8) arg);
1172                 ide_driveid_update(drive);
1173         }
1174         return err;
1175 }
1176
1177 /**
1178  *      ide_add_generic_settings        -       generic ide settings
1179  *      @drive: drive being configured
1180  *
1181  *      Add the generic parts of the system settings to the /proc files and
1182  *      ioctls for this IDE device. The caller must not be holding the
1183  *      ide_setting_sem.
1184  */
1185
1186 void ide_add_generic_settings (ide_drive_t *drive)
1187 {
1188 /*
1189  *                        drive         setting name            read/write access                               read ioctl              write ioctl             data type       min     max                             mul_factor      div_factor      data pointer                    set function
1190  */
1191         __ide_add_setting(drive,        "io_32bit",             drive->no_io_32bit ? SETTING_READ : SETTING_RW, HDIO_GET_32BIT,         HDIO_SET_32BIT,         TYPE_BYTE,      0,      1 + (SUPPORT_VLB_SYNC << 1),    1,              1,              &drive->io_32bit,               set_io_32bit,   0);
1192         __ide_add_setting(drive,        "keepsettings",         SETTING_RW,                                     HDIO_GET_KEEPSETTINGS,  HDIO_SET_KEEPSETTINGS,  TYPE_BYTE,      0,      1,                              1,              1,              &drive->keep_settings,          NULL,           0);
1193         __ide_add_setting(drive,        "nice1",                SETTING_RW,                                     -1,                     -1,                     TYPE_BYTE,      0,      1,                              1,              1,              &drive->nice1,                  NULL,           0);
1194         __ide_add_setting(drive,        "pio_mode",             SETTING_WRITE,                                  -1,                     HDIO_SET_PIO_MODE,      TYPE_BYTE,      0,      255,                            1,              1,              NULL,                           set_pio_mode,   0);
1195         __ide_add_setting(drive,        "unmaskirq",            drive->no_unmask ? SETTING_READ : SETTING_RW,   HDIO_GET_UNMASKINTR,    HDIO_SET_UNMASKINTR,    TYPE_BYTE,      0,      1,                              1,              1,              &drive->unmask,                 NULL,           0);
1196         __ide_add_setting(drive,        "using_dma",            SETTING_RW,                                     HDIO_GET_DMA,           HDIO_SET_DMA,           TYPE_BYTE,      0,      1,                              1,              1,              &drive->using_dma,              set_using_dma,  0);
1197         __ide_add_setting(drive,        "init_speed",           SETTING_RW,                                     -1,                     -1,                     TYPE_BYTE,      0,      70,                             1,              1,              &drive->init_speed,             NULL,           0);
1198         __ide_add_setting(drive,        "current_speed",        SETTING_RW,                                     -1,                     -1,                     TYPE_BYTE,      0,      70,                             1,              1,              &drive->current_speed,          set_xfer_rate,  0);
1199         __ide_add_setting(drive,        "number",               SETTING_RW,                                     -1,                     -1,                     TYPE_BYTE,      0,      3,                              1,              1,              &drive->dn,                     NULL,           0);
1200 }
1201
1202 /**
1203  *      system_bus_clock        -       clock guess
1204  *
1205  *      External version of the bus clock guess used by very old IDE drivers
1206  *      for things like VLB timings. Should not be used.
1207  */
1208
1209 int system_bus_clock (void)
1210 {
1211         return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
1212 }
1213
1214 EXPORT_SYMBOL(system_bus_clock);
1215
1216 static int generic_ide_suspend(struct device *dev, pm_message_t state)
1217 {
1218         ide_drive_t *drive = dev->driver_data;
1219         struct request rq;
1220         struct request_pm_state rqpm;
1221         ide_task_t args;
1222
1223         memset(&rq, 0, sizeof(rq));
1224         memset(&rqpm, 0, sizeof(rqpm));
1225         memset(&args, 0, sizeof(args));
1226         rq.flags = REQ_PM_SUSPEND;
1227         rq.special = &args;
1228         rq.pm = &rqpm;
1229         rqpm.pm_step = ide_pm_state_start_suspend;
1230         rqpm.pm_state = state.event;
1231
1232         return ide_do_drive_cmd(drive, &rq, ide_wait);
1233 }
1234
1235 static int generic_ide_resume(struct device *dev)
1236 {
1237         ide_drive_t *drive = dev->driver_data;
1238         struct request rq;
1239         struct request_pm_state rqpm;
1240         ide_task_t args;
1241
1242         memset(&rq, 0, sizeof(rq));
1243         memset(&rqpm, 0, sizeof(rqpm));
1244         memset(&args, 0, sizeof(args));
1245         rq.flags = REQ_PM_RESUME;
1246         rq.special = &args;
1247         rq.pm = &rqpm;
1248         rqpm.pm_step = ide_pm_state_start_resume;
1249         rqpm.pm_state = PM_EVENT_ON;
1250
1251         return ide_do_drive_cmd(drive, &rq, ide_head_wait);
1252 }
1253
1254 int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
1255                         unsigned int cmd, unsigned long arg)
1256 {
1257         ide_settings_t *setting;
1258         ide_driver_t *drv;
1259         int err = 0;
1260         void __user *p = (void __user *)arg;
1261
1262         down(&ide_setting_sem);
1263         if ((setting = ide_find_setting_by_ioctl(drive, cmd)) != NULL) {
1264                 if (cmd == setting->read_ioctl) {
1265                         err = ide_read_setting(drive, setting);
1266                         up(&ide_setting_sem);
1267                         return err >= 0 ? put_user(err, (long __user *)arg) : err;
1268                 } else {
1269                         if (bdev != bdev->bd_contains)
1270                                 err = -EINVAL;
1271                         else
1272                                 err = ide_write_setting(drive, setting, arg);
1273                         up(&ide_setting_sem);
1274                         return err;
1275                 }
1276         }
1277         up(&ide_setting_sem);
1278
1279         switch (cmd) {
1280                 case HDIO_GETGEO:
1281                 {
1282                         struct hd_geometry geom;
1283                         if (!p || (drive->media != ide_disk && drive->media != ide_floppy)) return -EINVAL;
1284                         geom.heads = drive->bios_head;
1285                         geom.sectors = drive->bios_sect;
1286                         geom.cylinders = (u16)drive->bios_cyl; /* truncate */
1287                         geom.start = get_start_sect(bdev);
1288                         if (copy_to_user(p, &geom, sizeof(struct hd_geometry)))
1289                                 return -EFAULT;
1290                         return 0;
1291                 }
1292
1293                 case HDIO_OBSOLETE_IDENTITY:
1294                 case HDIO_GET_IDENTITY:
1295                         if (bdev != bdev->bd_contains)
1296                                 return -EINVAL;
1297                         if (drive->id_read == 0)
1298                                 return -ENOMSG;
1299                         if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
1300                                 return -EFAULT;
1301                         return 0;
1302
1303                 case HDIO_GET_NICE:
1304                         return put_user(drive->dsc_overlap      <<      IDE_NICE_DSC_OVERLAP    |
1305                                         drive->atapi_overlap    <<      IDE_NICE_ATAPI_OVERLAP  |
1306                                         drive->nice0            <<      IDE_NICE_0              |
1307                                         drive->nice1            <<      IDE_NICE_1              |
1308                                         drive->nice2            <<      IDE_NICE_2,
1309                                         (long __user *) arg);
1310
1311 #ifdef CONFIG_IDE_TASK_IOCTL
1312                 case HDIO_DRIVE_TASKFILE:
1313                         if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
1314                                 return -EACCES;
1315                         switch(drive->media) {
1316                                 case ide_disk:
1317                                         return ide_taskfile_ioctl(drive, cmd, arg);
1318                                 default:
1319                                         return -ENOMSG;
1320                         }
1321 #endif /* CONFIG_IDE_TASK_IOCTL */
1322
1323                 case HDIO_DRIVE_CMD:
1324                         if (!capable(CAP_SYS_RAWIO))
1325                                 return -EACCES;
1326                         return ide_cmd_ioctl(drive, cmd, arg);
1327
1328                 case HDIO_DRIVE_TASK:
1329                         if (!capable(CAP_SYS_RAWIO))
1330                                 return -EACCES;
1331                         return ide_task_ioctl(drive, cmd, arg);
1332
1333                 case HDIO_SCAN_HWIF:
1334                 {
1335                         hw_regs_t hw;
1336                         int args[3];
1337                         if (!capable(CAP_SYS_RAWIO)) return -EACCES;
1338                         if (copy_from_user(args, p, 3 * sizeof(int)))
1339                                 return -EFAULT;
1340                         memset(&hw, 0, sizeof(hw));
1341                         ide_init_hwif_ports(&hw, (unsigned long) args[0],
1342                                             (unsigned long) args[1], NULL);
1343                         hw.irq = args[2];
1344                         if (ide_register_hw(&hw, NULL) == -1)
1345                                 return -EIO;
1346                         return 0;
1347                 }
1348                 case HDIO_UNREGISTER_HWIF:
1349                         if (!capable(CAP_SYS_RAWIO)) return -EACCES;
1350                         /* (arg > MAX_HWIFS) checked in function */
1351                         ide_unregister(arg);
1352                         return 0;
1353                 case HDIO_SET_NICE:
1354                         if (!capable(CAP_SYS_ADMIN)) return -EACCES;
1355                         if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
1356                                 return -EPERM;
1357                         drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
1358                         drv = *(ide_driver_t **)bdev->bd_disk->private_data;
1359                         if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
1360                                 drive->dsc_overlap = 0;
1361                                 return -EPERM;
1362                         }
1363                         drive->nice1 = (arg >> IDE_NICE_1) & 1;
1364                         return 0;
1365                 case HDIO_DRIVE_RESET:
1366                 {
1367                         unsigned long flags;
1368                         if (!capable(CAP_SYS_ADMIN)) return -EACCES;
1369
1370                         /*
1371                          *      Abort the current command on the
1372                          *      group if there is one, taking
1373                          *      care not to allow anything else
1374                          *      to be queued and to die on the
1375                          *      spot if we miss one somehow
1376                          */
1377
1378                         spin_lock_irqsave(&ide_lock, flags);
1379
1380                         ide_abort(drive, "drive reset");
1381
1382                         if(HWGROUP(drive)->handler)
1383                                 BUG();
1384
1385                         /* Ensure nothing gets queued after we
1386                            drop the lock. Reset will clear the busy */
1387
1388                         HWGROUP(drive)->busy = 1;
1389                         spin_unlock_irqrestore(&ide_lock, flags);
1390                         (void) ide_do_reset(drive);
1391
1392                         return 0;
1393                 }
1394
1395                 case CDROMEJECT:
1396                 case CDROMCLOSETRAY:
1397                         return scsi_cmd_ioctl(file, bdev->bd_disk, cmd, p);
1398
1399                 case HDIO_GET_BUSSTATE:
1400                         if (!capable(CAP_SYS_ADMIN))
1401                                 return -EACCES;
1402                         if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
1403                                 return -EFAULT;
1404                         return 0;
1405
1406                 case HDIO_SET_BUSSTATE:
1407                         if (!capable(CAP_SYS_ADMIN))
1408                                 return -EACCES;
1409                         if (HWIF(drive)->busproc)
1410                                 return HWIF(drive)->busproc(drive, (int)arg);
1411                         return -EOPNOTSUPP;
1412                 default:
1413                         return -EINVAL;
1414         }
1415 }
1416
1417 EXPORT_SYMBOL(generic_ide_ioctl);
1418
1419 /*
1420  * stridx() returns the offset of c within s,
1421  * or -1 if c is '\0' or not found within s.
1422  */
1423 static int __init stridx (const char *s, char c)
1424 {
1425         char *i = strchr(s, c);
1426         return (i && c) ? i - s : -1;
1427 }
1428
1429 /*
1430  * match_parm() does parsing for ide_setup():
1431  *
1432  * 1. the first char of s must be '='.
1433  * 2. if the remainder matches one of the supplied keywords,
1434  *     the index (1 based) of the keyword is negated and returned.
1435  * 3. if the remainder is a series of no more than max_vals numbers
1436  *     separated by commas, the numbers are saved in vals[] and a
1437  *     count of how many were saved is returned.  Base10 is assumed,
1438  *     and base16 is allowed when prefixed with "0x".
1439  * 4. otherwise, zero is returned.
1440  */
1441 static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
1442 {
1443         static const char *decimal = "0123456789";
1444         static const char *hex = "0123456789abcdef";
1445         int i, n;
1446
1447         if (*s++ == '=') {
1448                 /*
1449                  * Try matching against the supplied keywords,
1450                  * and return -(index+1) if we match one
1451                  */
1452                 if (keywords != NULL) {
1453                         for (i = 0; *keywords != NULL; ++i) {
1454                                 if (!strcmp(s, *keywords++))
1455                                         return -(i+1);
1456                         }
1457                 }
1458                 /*
1459                  * Look for a series of no more than "max_vals"
1460                  * numeric values separated by commas, in base10,
1461                  * or base16 when prefixed with "0x".
1462                  * Return a count of how many were found.
1463                  */
1464                 for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
1465                         vals[n] = i;
1466                         while ((i = stridx(decimal, *++s)) >= 0)
1467                                 vals[n] = (vals[n] * 10) + i;
1468                         if (*s == 'x' && !vals[n]) {
1469                                 while ((i = stridx(hex, *++s)) >= 0)
1470                                         vals[n] = (vals[n] * 0x10) + i;
1471                         }
1472                         if (++n == max_vals)
1473                                 break;
1474                         if (*s == ',' || *s == ';')
1475                                 ++s;
1476                 }
1477                 if (!*s)
1478                         return n;
1479         }
1480         return 0;       /* zero = nothing matched */
1481 }
1482
1483 #ifdef CONFIG_BLK_DEV_ALI14XX
1484 static int __initdata probe_ali14xx;
1485 extern int ali14xx_init(void);
1486 #endif
1487 #ifdef CONFIG_BLK_DEV_UMC8672
1488 static int __initdata probe_umc8672;
1489 extern int umc8672_init(void);
1490 #endif
1491 #ifdef CONFIG_BLK_DEV_DTC2278
1492 static int __initdata probe_dtc2278;
1493 extern int dtc2278_init(void);
1494 #endif
1495 #ifdef CONFIG_BLK_DEV_HT6560B
1496 static int __initdata probe_ht6560b;
1497 extern int ht6560b_init(void);
1498 #endif
1499 #ifdef CONFIG_BLK_DEV_QD65XX
1500 static int __initdata probe_qd65xx;
1501 extern int qd65xx_init(void);
1502 #endif
1503
1504 static int __initdata is_chipset_set[MAX_HWIFS];
1505
1506 /*
1507  * ide_setup() gets called VERY EARLY during initialization,
1508  * to handle kernel "command line" strings beginning with "hdx=" or "ide".
1509  *
1510  * Remember to update Documentation/ide.txt if you change something here.
1511  */
1512 static int __init ide_setup(char *s)
1513 {
1514         int i, vals[3];
1515         ide_hwif_t *hwif;
1516         ide_drive_t *drive;
1517         unsigned int hw, unit;
1518         const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
1519         const char max_hwif  = '0' + (MAX_HWIFS - 1);
1520
1521
1522         if (strncmp(s,"hd",2) == 0 && s[2] == '=')      /* hd= is for hd.c   */
1523                 return 0;                               /* driver and not us */
1524
1525         if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
1526                 return 0;
1527
1528         printk(KERN_INFO "ide_setup: %s", s);
1529         init_ide_data ();
1530
1531 #ifdef CONFIG_BLK_DEV_IDEDOUBLER
1532         if (!strcmp(s, "ide=doubler")) {
1533                 extern int ide_doubler;
1534
1535                 printk(" : Enabled support for IDE doublers\n");
1536                 ide_doubler = 1;
1537                 return 1;
1538         }
1539 #endif /* CONFIG_BLK_DEV_IDEDOUBLER */
1540
1541         if (!strcmp(s, "ide=nodma")) {
1542                 printk(" : Prevented DMA\n");
1543                 noautodma = 1;
1544                 return 1;
1545         }
1546
1547 #ifdef CONFIG_BLK_DEV_IDEPCI
1548         if (!strcmp(s, "ide=reverse")) {
1549                 ide_scan_direction = 1;
1550                 printk(" : Enabled support for IDE inverse scan order.\n");
1551                 return 1;
1552         }
1553 #endif /* CONFIG_BLK_DEV_IDEPCI */
1554
1555         /*
1556          * Look for drive options:  "hdx="
1557          */
1558         if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
1559                 const char *hd_words[] = {
1560                         "none", "noprobe", "nowerr", "cdrom", "serialize",
1561                         "autotune", "noautotune", "minus8", "swapdata", "bswap",
1562                         "minus11", "remap", "remap63", "scsi", NULL };
1563                 unit = s[2] - 'a';
1564                 hw   = unit / MAX_DRIVES;
1565                 unit = unit % MAX_DRIVES;
1566                 hwif = &ide_hwifs[hw];
1567                 drive = &hwif->drives[unit];
1568                 if (strncmp(s + 4, "ide-", 4) == 0) {
1569                         strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
1570                         goto done;
1571                 }
1572                 switch (match_parm(&s[3], hd_words, vals, 3)) {
1573                         case -1: /* "none" */
1574                         case -2: /* "noprobe" */
1575                                 drive->noprobe = 1;
1576                                 goto done;
1577                         case -3: /* "nowerr" */
1578                                 drive->bad_wstat = BAD_R_STAT;
1579                                 hwif->noprobe = 0;
1580                                 goto done;
1581                         case -4: /* "cdrom" */
1582                                 drive->present = 1;
1583                                 drive->media = ide_cdrom;
1584                                 /* an ATAPI device ignores DRDY */
1585                                 drive->ready_stat = 0;
1586                                 hwif->noprobe = 0;
1587                                 goto done;
1588                         case -5: /* "serialize" */
1589                                 printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
1590                                 goto do_serialize;
1591                         case -6: /* "autotune" */
1592                                 drive->autotune = IDE_TUNE_AUTO;
1593                                 goto obsolete_option;
1594                         case -7: /* "noautotune" */
1595                                 drive->autotune = IDE_TUNE_NOAUTO;
1596                                 goto obsolete_option;
1597                         case -9: /* "swapdata" */
1598                         case -10: /* "bswap" */
1599                                 drive->bswap = 1;
1600                                 goto done;
1601                         case -12: /* "remap" */
1602                                 drive->remap_0_to_1 = 1;
1603                                 goto done;
1604                         case -13: /* "remap63" */
1605                                 drive->sect0 = 63;
1606                                 goto done;
1607                         case -14: /* "scsi" */
1608                                 drive->scsi = 1;
1609                                 goto done;
1610                         case 3: /* cyl,head,sect */
1611                                 drive->media    = ide_disk;
1612                                 drive->ready_stat = READY_STAT;
1613                                 drive->cyl      = drive->bios_cyl  = vals[0];
1614                                 drive->head     = drive->bios_head = vals[1];
1615                                 drive->sect     = drive->bios_sect = vals[2];
1616                                 drive->present  = 1;
1617                                 drive->forced_geom = 1;
1618                                 hwif->noprobe = 0;
1619                                 goto done;
1620                         default:
1621                                 goto bad_option;
1622                 }
1623         }
1624
1625         if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
1626                 goto bad_option;
1627         /*
1628          * Look for bus speed option:  "idebus="
1629          */
1630         if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
1631                 if (match_parm(&s[6], NULL, vals, 1) != 1)
1632                         goto bad_option;
1633                 if (vals[0] >= 20 && vals[0] <= 66) {
1634                         idebus_parameter = vals[0];
1635                 } else
1636                         printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
1637                 goto done;
1638         }
1639         /*
1640          * Look for interface options:  "idex="
1641          */
1642         if (s[3] >= '0' && s[3] <= max_hwif) {
1643                 /*
1644                  * Be VERY CAREFUL changing this: note hardcoded indexes below
1645                  * (-8, -9, -10) are reserved to ease the hardcoding.
1646                  */
1647                 static const char *ide_words[] = {
1648                         "noprobe", "serialize", "autotune", "noautotune",
1649                         "reset", "dma", "ata66", "minus8", "minus9",
1650                         "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
1651                         "dtc2278", "umc8672", "ali14xx", NULL };
1652                 hw = s[3] - '0';
1653                 hwif = &ide_hwifs[hw];
1654                 i = match_parm(&s[4], ide_words, vals, 3);
1655
1656                 /*
1657                  * Cryptic check to ensure chipset not already set for hwif.
1658                  * Note: we can't depend on hwif->chipset here.
1659                  */
1660                 if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
1661                         /* chipset already specified */
1662                         if (is_chipset_set[hw])
1663                                 goto bad_option;
1664                         if (i > -18 && i <= -11) {
1665                                 /* these drivers are for "ide0=" only */
1666                                 if (hw != 0)
1667                                         goto bad_hwif;
1668                                 /* chipset already specified for 2nd port */
1669                                 if (is_chipset_set[hw+1])
1670                                         goto bad_option;
1671                         }
1672                         is_chipset_set[hw] = 1;
1673                         printk("\n");
1674                 }
1675
1676                 switch (i) {
1677 #ifdef CONFIG_BLK_DEV_ALI14XX
1678                         case -17: /* "ali14xx" */
1679                                 probe_ali14xx = 1;
1680                                 goto done;
1681 #endif
1682 #ifdef CONFIG_BLK_DEV_UMC8672
1683                         case -16: /* "umc8672" */
1684                                 probe_umc8672 = 1;
1685                                 goto done;
1686 #endif
1687 #ifdef CONFIG_BLK_DEV_DTC2278
1688                         case -15: /* "dtc2278" */
1689                                 probe_dtc2278 = 1;
1690                                 goto done;
1691 #endif
1692 #ifdef CONFIG_BLK_DEV_CMD640
1693                         case -14: /* "cmd640_vlb" */
1694                         {
1695                                 extern int cmd640_vlb; /* flag for cmd640.c */
1696                                 cmd640_vlb = 1;
1697                                 goto done;
1698                         }
1699 #endif
1700 #ifdef CONFIG_BLK_DEV_HT6560B
1701                         case -13: /* "ht6560b" */
1702                                 probe_ht6560b = 1;
1703                                 goto done;
1704 #endif
1705 #ifdef CONFIG_BLK_DEV_QD65XX
1706                         case -12: /* "qd65xx" */
1707                                 probe_qd65xx = 1;
1708                                 goto done;
1709 #endif
1710 #ifdef CONFIG_BLK_DEV_4DRIVES
1711                         case -11: /* "four" drives on one set of ports */
1712                         {
1713                                 ide_hwif_t *mate = &ide_hwifs[hw^1];
1714                                 mate->drives[0].select.all ^= 0x20;
1715                                 mate->drives[1].select.all ^= 0x20;
1716                                 hwif->chipset = mate->chipset = ide_4drives;
1717                                 mate->irq = hwif->irq;
1718                                 memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
1719                                 goto do_serialize;
1720                         }
1721 #endif /* CONFIG_BLK_DEV_4DRIVES */
1722                         case -10: /* minus10 */
1723                         case -9: /* minus9 */
1724                         case -8: /* minus8 */
1725                                 goto bad_option;
1726                         case -7: /* ata66 */
1727 #ifdef CONFIG_BLK_DEV_IDEPCI
1728                                 hwif->udma_four = 1;
1729                                 goto obsolete_option;
1730 #else
1731                                 goto bad_hwif;
1732 #endif
1733                         case -6: /* dma */
1734                                 hwif->autodma = 1;
1735                                 goto obsolete_option;
1736                         case -5: /* "reset" */
1737                                 hwif->reset = 1;
1738                                 goto obsolete_option;
1739                         case -4: /* "noautotune" */
1740                                 hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
1741                                 hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
1742                                 goto obsolete_option;
1743                         case -3: /* "autotune" */
1744                                 hwif->drives[0].autotune = IDE_TUNE_AUTO;
1745                                 hwif->drives[1].autotune = IDE_TUNE_AUTO;
1746                                 goto obsolete_option;
1747                         case -2: /* "serialize" */
1748                         do_serialize:
1749                                 hwif->mate = &ide_hwifs[hw^1];
1750                                 hwif->mate->mate = hwif;
1751                                 hwif->serialized = hwif->mate->serialized = 1;
1752                                 goto obsolete_option;
1753
1754                         case -1: /* "noprobe" */
1755                                 hwif->noprobe = 1;
1756                                 goto done;
1757
1758                         case 1: /* base */
1759                                 vals[1] = vals[0] + 0x206; /* default ctl */
1760                         case 2: /* base,ctl */
1761                                 vals[2] = 0;    /* default irq = probe for it */
1762                         case 3: /* base,ctl,irq */
1763                                 hwif->hw.irq = vals[2];
1764                                 ide_init_hwif_ports(&hwif->hw, (unsigned long) vals[0], (unsigned long) vals[1], &hwif->irq);
1765                                 memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
1766                                 hwif->irq      = vals[2];
1767                                 hwif->noprobe  = 0;
1768                                 hwif->chipset  = ide_forced;
1769                                 goto obsolete_option;
1770
1771                         case 0: goto bad_option;
1772                         default:
1773                                 printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
1774                                 return 1;
1775                 }
1776         }
1777 bad_option:
1778         printk(" -- BAD OPTION\n");
1779         return 1;
1780 obsolete_option:
1781         printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
1782         return 1;
1783 bad_hwif:
1784         printk("-- NOT SUPPORTED ON ide%d", hw);
1785 done:
1786         printk("\n");
1787         return 1;
1788 }
1789
1790 extern void pnpide_init(void);
1791 extern void h8300_ide_init(void);
1792
1793 /*
1794  * probe_for_hwifs() finds/initializes "known" IDE interfaces
1795  */
1796 static void __init probe_for_hwifs (void)
1797 {
1798 #ifdef CONFIG_BLK_DEV_IDEPCI
1799         ide_scan_pcibus(ide_scan_direction);
1800 #endif /* CONFIG_BLK_DEV_IDEPCI */
1801
1802 #ifdef CONFIG_ETRAX_IDE
1803         {
1804                 extern void init_e100_ide(void);
1805                 init_e100_ide();
1806         }
1807 #endif /* CONFIG_ETRAX_IDE */
1808 #ifdef CONFIG_BLK_DEV_CMD640
1809         {
1810                 extern void ide_probe_for_cmd640x(void);
1811                 ide_probe_for_cmd640x();
1812         }
1813 #endif /* CONFIG_BLK_DEV_CMD640 */
1814 #ifdef CONFIG_BLK_DEV_IDE_PMAC
1815         {
1816                 extern void pmac_ide_probe(void);
1817                 pmac_ide_probe();
1818         }
1819 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
1820 #ifdef CONFIG_BLK_DEV_GAYLE
1821         {
1822                 extern void gayle_init(void);
1823                 gayle_init();
1824         }
1825 #endif /* CONFIG_BLK_DEV_GAYLE */
1826 #ifdef CONFIG_BLK_DEV_FALCON_IDE
1827         {
1828                 extern void falconide_init(void);
1829                 falconide_init();
1830         }
1831 #endif /* CONFIG_BLK_DEV_FALCON_IDE */
1832 #ifdef CONFIG_BLK_DEV_MAC_IDE
1833         {
1834                 extern void macide_init(void);
1835                 macide_init();
1836         }
1837 #endif /* CONFIG_BLK_DEV_MAC_IDE */
1838 #ifdef CONFIG_BLK_DEV_Q40IDE
1839         {
1840                 extern void q40ide_init(void);
1841                 q40ide_init();
1842         }
1843 #endif /* CONFIG_BLK_DEV_Q40IDE */
1844 #ifdef CONFIG_BLK_DEV_BUDDHA
1845         {
1846                 extern void buddha_init(void);
1847                 buddha_init();
1848         }
1849 #endif /* CONFIG_BLK_DEV_BUDDHA */
1850 #ifdef CONFIG_BLK_DEV_IDEPNP
1851         pnpide_init();
1852 #endif
1853 #ifdef CONFIG_H8300
1854         h8300_ide_init();
1855 #endif
1856 }
1857
1858 void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
1859 {
1860 #ifdef CONFIG_PROC_FS
1861         ide_add_proc_entries(drive->proc, driver->proc, drive);
1862 #endif
1863 }
1864
1865 EXPORT_SYMBOL(ide_register_subdriver);
1866
1867 /**
1868  *      ide_unregister_subdriver        -       disconnect drive from driver
1869  *      @drive: drive to unplug
1870  *      @driver: driver
1871  *
1872  *      Disconnect a drive from the driver it was attached to and then
1873  *      clean up the various proc files and other objects attached to it.
1874  *
1875  *      Takes ide_setting_sem and ide_lock.
1876  *      Caller must hold none of the locks.
1877  */
1878
1879 void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver)
1880 {
1881         unsigned long flags;
1882
1883         down(&ide_setting_sem);
1884         spin_lock_irqsave(&ide_lock, flags);
1885 #ifdef CONFIG_PROC_FS
1886         ide_remove_proc_entries(drive->proc, driver->proc);
1887 #endif
1888         auto_remove_settings(drive);
1889         spin_unlock_irqrestore(&ide_lock, flags);
1890         up(&ide_setting_sem);
1891 }
1892
1893 EXPORT_SYMBOL(ide_unregister_subdriver);
1894
1895 /*
1896  * Probe module
1897  */
1898
1899 EXPORT_SYMBOL(ide_lock);
1900
1901 static int ide_bus_match(struct device *dev, struct device_driver *drv)
1902 {
1903         return 1;
1904 }
1905
1906 struct bus_type ide_bus_type = {
1907         .name           = "ide",
1908         .match          = ide_bus_match,
1909         .suspend        = generic_ide_suspend,
1910         .resume         = generic_ide_resume,
1911 };
1912
1913 EXPORT_SYMBOL_GPL(ide_bus_type);
1914
1915 /*
1916  * This is gets invoked once during initialization, to set *everything* up
1917  */
1918 static int __init ide_init(void)
1919 {
1920         printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
1921         devfs_mk_dir("ide");
1922         system_bus_speed = ide_system_bus_speed();
1923
1924         bus_register(&ide_bus_type);
1925
1926         init_ide_data();
1927
1928 #ifdef CONFIG_PROC_FS
1929         proc_ide_root = proc_mkdir("ide", NULL);
1930 #endif
1931
1932 #ifdef CONFIG_BLK_DEV_ALI14XX
1933         if (probe_ali14xx)
1934                 (void)ali14xx_init();
1935 #endif
1936 #ifdef CONFIG_BLK_DEV_UMC8672
1937         if (probe_umc8672)
1938                 (void)umc8672_init();
1939 #endif
1940 #ifdef CONFIG_BLK_DEV_DTC2278
1941         if (probe_dtc2278)
1942                 (void)dtc2278_init();
1943 #endif
1944 #ifdef CONFIG_BLK_DEV_HT6560B
1945         if (probe_ht6560b)
1946                 (void)ht6560b_init();
1947 #endif
1948 #ifdef CONFIG_BLK_DEV_QD65XX
1949         if (probe_qd65xx)
1950                 (void)qd65xx_init();
1951 #endif
1952
1953         initializing = 1;
1954         /* Probe for special PCI and other "known" interface chipsets. */
1955         probe_for_hwifs();
1956         initializing = 0;
1957
1958 #ifdef CONFIG_PROC_FS
1959         proc_ide_create();
1960 #endif
1961         return 0;
1962 }
1963
1964 #ifdef MODULE
1965 static char *options = NULL;
1966 module_param(options, charp, 0);
1967 MODULE_LICENSE("GPL");
1968
1969 static void __init parse_options (char *line)
1970 {
1971         char *next = line;
1972
1973         if (line == NULL || !*line)
1974                 return;
1975         while ((line = next) != NULL) {
1976                 if ((next = strchr(line,' ')) != NULL)
1977                         *next++ = 0;
1978                 if (!ide_setup(line))
1979                         printk (KERN_INFO "Unknown option '%s'\n", line);
1980         }
1981 }
1982
1983 int init_module (void)
1984 {
1985         parse_options(options);
1986         return ide_init();
1987 }
1988
1989 void cleanup_module (void)
1990 {
1991         int index;
1992
1993         for (index = 0; index < MAX_HWIFS; ++index)
1994                 ide_unregister(index);
1995
1996 #ifdef CONFIG_PROC_FS
1997         proc_ide_destroy();
1998 #endif
1999         devfs_remove("ide");
2000
2001         bus_unregister(&ide_bus_type);
2002 }
2003
2004 #else /* !MODULE */
2005
2006 __setup("", ide_setup);
2007
2008 module_init(ide_init);
2009
2010 #endif /* MODULE */