git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/scsi_transport_spi.c

   1 /*
   2  *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
   3  *
   4  *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
   5  *  Copyright (c) 2004, 2005 James Bottomley <James.Bottomley@SteelEye.com>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License, or
  10  *  (at your option) any later version.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/ctype.h>
  22 #include <linux/init.h>
  23 #include <linux/module.h>
  24 #include <linux/workqueue.h>
  25 #include <linux/blkdev.h>
  26 #include <linux/mutex.h>
  27 #include <scsi/scsi.h>
  28 #include "scsi_priv.h"
  29 #include <scsi/scsi_device.h>
  30 #include <scsi/scsi_host.h>
  31 #include <scsi/scsi_cmnd.h>
  32 #include <scsi/scsi_eh.h>
  33 #include <scsi/scsi_transport.h>
  34 #include <scsi/scsi_transport_spi.h>
  35
  36 #define SPI_NUM_ATTRS 14        /* increase this if you add attributes */
  37 #define SPI_OTHER_ATTRS 1       /* Increase this if you add "always
  38                                  * on" attributes */
  39 #define SPI_HOST_ATTRS  1
  40
  41 #define SPI_MAX_ECHO_BUFFER_SIZE        4096
  42
  43 #define DV_LOOPS        3
  44 #define DV_TIMEOUT      (10*HZ)
  45 #define DV_RETRIES      3       /* should only need at most
  46                                  * two cc/ua clears */
  47
  48 /* Private data accessors (keep these out of the header file) */
  49 #define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
  50 #define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
  51
  52 struct spi_internal {
  53         struct scsi_transport_template t;
  54         struct spi_function_template *f;
  55         /* The actual attributes */
  56         struct class_device_attribute private_attrs[SPI_NUM_ATTRS];
  57         /* The array of null terminated pointers to attributes
  58          * needed by scsi_sysfs.c */
  59         struct class_device_attribute *attrs[SPI_NUM_ATTRS + SPI_OTHER_ATTRS + 1];
  60         struct class_device_attribute private_host_attrs[SPI_HOST_ATTRS];
  61         struct class_device_attribute *host_attrs[SPI_HOST_ATTRS + 1];
  62 };
  63
  64 #define to_spi_internal(tmpl)   container_of(tmpl, struct spi_internal, t)
  65
  66 static const int ppr_to_ps[] = {
  67         /* The PPR values 0-6 are reserved, fill them in when
  68          * the committee defines them */
  69         -1,                     /* 0x00 */
  70         -1,                     /* 0x01 */
  71         -1,                     /* 0x02 */
  72         -1,                     /* 0x03 */
  73         -1,                     /* 0x04 */
  74         -1,                     /* 0x05 */
  75         -1,                     /* 0x06 */
  76          3125,                  /* 0x07 */
  77          6250,                  /* 0x08 */
  78         12500,                  /* 0x09 */
  79         25000,                  /* 0x0a */
  80         30300,                  /* 0x0b */
  81         50000,                  /* 0x0c */
  82 };
  83 /* The PPR values at which you calculate the period in ns by multiplying
  84  * by 4 */
  85 #define SPI_STATIC_PPR  0x0c
  86
  87 static int sprint_frac(char *dest, int value, int denom)
  88 {
  89         int frac = value % denom;
  90         int result = sprintf(dest, "%d", value / denom);
  91
  92         if (frac == 0)
  93                 return result;
  94         dest[result++] = '.';
  95
  96         do {
  97                 denom /= 10;
  98                 sprintf(dest + result, "%d", frac / denom);
  99                 result++;
 100                 frac %= denom;
 101         } while (frac);
 102
 103         dest[result++] = '\0';
 104         return result;
 105 }
 106
 107 static int spi_execute(struct scsi_device *sdev, const void *cmd,
 108                        enum dma_data_direction dir,
 109                        void *buffer, unsigned bufflen,
 110                        struct scsi_sense_hdr *sshdr)
 111 {
 112         int i, result;
 113         unsigned char sense[SCSI_SENSE_BUFFERSIZE];
 114
 115         for(i = 0; i < DV_RETRIES; i++) {
 116                 result = scsi_execute(sdev, cmd, dir, buffer, bufflen,
 117                                       sense, DV_TIMEOUT, /* retries */ 1,
 118                                       REQ_FAILFAST);
 119                 if (result & DRIVER_SENSE) {
 120                         struct scsi_sense_hdr sshdr_tmp;
 121                         if (!sshdr)
 122                                 sshdr = &sshdr_tmp;
 123
 124                         if (scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE,
 125                                                  sshdr)
 126                             && sshdr->sense_key == UNIT_ATTENTION)
 127                                 continue;
 128                 }
 129                 break;
 130         }
 131         return result;
 132 }
 133
 134 static struct {
 135         enum spi_signal_type    value;
 136         char                    *name;
 137 } signal_types[] = {
 138         { SPI_SIGNAL_UNKNOWN, "unknown" },
 139         { SPI_SIGNAL_SE, "SE" },
 140         { SPI_SIGNAL_LVD, "LVD" },
 141         { SPI_SIGNAL_HVD, "HVD" },
 142 };
 143
 144 static inline const char *spi_signal_to_string(enum spi_signal_type type)
 145 {
 146         int i;
 147
 148         for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
 149                 if (type == signal_types[i].value)
 150                         return signal_types[i].name;
 151         }
 152         return NULL;
 153 }
 154 static inline enum spi_signal_type spi_signal_to_value(const char *name)
 155 {
 156         int i, len;
 157
 158         for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
 159                 len =  strlen(signal_types[i].name);
 160                 if (strncmp(name, signal_types[i].name, len) == 0 &&
 161                     (name[len] == '\n' || name[len] == '\0'))
 162                         return signal_types[i].value;
 163         }
 164         return SPI_SIGNAL_UNKNOWN;
 165 }
 166
 167 static int spi_host_setup(struct transport_container *tc, struct device *dev,
 168                           struct class_device *cdev)
 169 {
 170         struct Scsi_Host *shost = dev_to_shost(dev);
 171
 172         spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
 173
 174         return 0;
 175 }
 176
 177 static DECLARE_TRANSPORT_CLASS(spi_host_class,
 178                                "spi_host",
 179                                spi_host_setup,
 180                                NULL,
 181                                NULL);
 182
 183 static int spi_host_match(struct attribute_container *cont,
 184                           struct device *dev)
 185 {
 186         struct Scsi_Host *shost;
 187         struct spi_internal *i;
 188
 189         if (!scsi_is_host_device(dev))
 190                 return 0;
 191
 192         shost = dev_to_shost(dev);
 193         if (!shost->transportt  || shost->transportt->host_attrs.ac.class
 194             != &spi_host_class.class)
 195                 return 0;
 196
 197         i = to_spi_internal(shost->transportt);
 198
 199         return &i->t.host_attrs.ac == cont;
 200 }
 201
 202 static int spi_device_configure(struct transport_container *tc,
 203                                 struct device *dev,
 204                                 struct class_device *cdev)
 205 {
 206         struct scsi_device *sdev = to_scsi_device(dev);
 207         struct scsi_target *starget = sdev->sdev_target;
 208
 209         /* Populate the target capability fields with the values
 210          * gleaned from the device inquiry */
 211
 212         spi_support_sync(starget) = scsi_device_sync(sdev);
 213         spi_support_wide(starget) = scsi_device_wide(sdev);
 214         spi_support_dt(starget) = scsi_device_dt(sdev);
 215         spi_support_dt_only(starget) = scsi_device_dt_only(sdev);
 216         spi_support_ius(starget) = scsi_device_ius(sdev);
 217         spi_support_qas(starget) = scsi_device_qas(sdev);
 218
 219         return 0;
 220 }
 221
 222 static int spi_setup_transport_attrs(struct transport_container *tc,
 223                                      struct device *dev,
 224                                      struct class_device *cdev)
 225 {
 226         struct scsi_target *starget = to_scsi_target(dev);
 227
 228         spi_period(starget) = -1;       /* illegal value */
 229         spi_min_period(starget) = 0;
 230         spi_offset(starget) = 0;        /* async */
 231         spi_max_offset(starget) = 255;
 232         spi_width(starget) = 0; /* narrow */
 233         spi_max_width(starget) = 1;
 234         spi_iu(starget) = 0;    /* no IU */
 235         spi_dt(starget) = 0;    /* ST */
 236         spi_qas(starget) = 0;
 237         spi_wr_flow(starget) = 0;
 238         spi_rd_strm(starget) = 0;
 239         spi_rti(starget) = 0;
 240         spi_pcomp_en(starget) = 0;
 241         spi_hold_mcs(starget) = 0;
 242         spi_dv_pending(starget) = 0;
 243         spi_dv_in_progress(starget) = 0;
 244         spi_initial_dv(starget) = 0;
 245         mutex_init(&spi_dv_mutex(starget));
 246
 247         return 0;
 248 }
 249
 250 #define spi_transport_show_simple(field, format_string)                 \
 251                                                                         \
 252 static ssize_t                                                          \
 253 show_spi_transport_##field(struct class_device *cdev, char *buf)        \
 254 {                                                                       \
 255         struct scsi_target *starget = transport_class_to_starget(cdev); \
 256         struct spi_transport_attrs *tp;                                 \
 257                                                                         \
 258         tp = (struct spi_transport_attrs *)&starget->starget_data;      \
 259         return snprintf(buf, 20, format_string, tp->field);             \
 260 }
 261
 262 #define spi_transport_store_simple(field, format_string)                \
 263                                                                         \
 264 static ssize_t                                                          \
 265 store_spi_transport_##field(struct class_device *cdev, const char *buf, \
 266                             size_t count)                               \
 267 {                                                                       \
 268         int val;                                                        \
 269         struct scsi_target *starget = transport_class_to_starget(cdev); \
 270         struct spi_transport_attrs *tp;                                 \
 271                                                                         \
 272         tp = (struct spi_transport_attrs *)&starget->starget_data;      \
 273         val = simple_strtoul(buf, NULL, 0);                             \
 274         tp->field = val;                                                \
 275         return count;                                                   \
 276 }
 277
 278 #define spi_transport_show_function(field, format_string)               \
 279                                                                         \
 280 static ssize_t                                                          \
 281 show_spi_transport_##field(struct class_device *cdev, char *buf)        \
 282 {                                                                       \
 283         struct scsi_target *starget = transport_class_to_starget(cdev); \
 284         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);    \
 285         struct spi_transport_attrs *tp;                                 \
 286         struct spi_internal *i = to_spi_internal(shost->transportt);    \
 287         tp = (struct spi_transport_attrs *)&starget->starget_data;      \
 288         if (i->f->get_##field)                                          \
 289                 i->f->get_##field(starget);                             \
 290         return snprintf(buf, 20, format_string, tp->field);             \
 291 }
 292
 293 #define spi_transport_store_function(field, format_string)              \
 294 static ssize_t                                                          \
 295 store_spi_transport_##field(struct class_device *cdev, const char *buf, \
 296                             size_t count)                               \
 297 {                                                                       \
 298         int val;                                                        \
 299         struct scsi_target *starget = transport_class_to_starget(cdev); \
 300         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);    \
 301         struct spi_internal *i = to_spi_internal(shost->transportt);    \
 302                                                                         \
 303         val = simple_strtoul(buf, NULL, 0);                             \
 304         i->f->set_##field(starget, val);                        \
 305         return count;                                                   \
 306 }
 307
 308 #define spi_transport_store_max(field, format_string)                   \
 309 static ssize_t                                                          \
 310 store_spi_transport_##field(struct class_device *cdev, const char *buf, \
 311                             size_t count)                               \
 312 {                                                                       \
 313         int val;                                                        \
 314         struct scsi_target *starget = transport_class_to_starget(cdev); \
 315         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);    \
 316         struct spi_internal *i = to_spi_internal(shost->transportt);    \
 317         struct spi_transport_attrs *tp                                  \
 318                 = (struct spi_transport_attrs *)&starget->starget_data; \
 319                                                                         \
 320         val = simple_strtoul(buf, NULL, 0);                             \
 321         if (val > tp->max_##field)                                      \
 322                 val = tp->max_##field;                                  \
 323         i->f->set_##field(starget, val);                                \
 324         return count;                                                   \
 325 }
 326
 327 #define spi_transport_rd_attr(field, format_string)                     \
 328         spi_transport_show_function(field, format_string)               \
 329         spi_transport_store_function(field, format_string)              \
 330 static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR,                      \
 331                          show_spi_transport_##field,                    \
 332                          store_spi_transport_##field);
 333
 334 #define spi_transport_simple_attr(field, format_string)                 \
 335         spi_transport_show_simple(field, format_string)                 \
 336         spi_transport_store_simple(field, format_string)                \
 337 static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR,                      \
 338                          show_spi_transport_##field,                    \
 339                          store_spi_transport_##field);
 340
 341 #define spi_transport_max_attr(field, format_string)                    \
 342         spi_transport_show_function(field, format_string)               \
 343         spi_transport_store_max(field, format_string)                   \
 344         spi_transport_simple_attr(max_##field, format_string)           \
 345 static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR,                      \
 346                          show_spi_transport_##field,                    \
 347                          store_spi_transport_##field);
 348
 349 /* The Parallel SCSI Tranport Attributes: */
 350 spi_transport_max_attr(offset, "%d\n");
 351 spi_transport_max_attr(width, "%d\n");
 352 spi_transport_rd_attr(iu, "%d\n");
 353 spi_transport_rd_attr(dt, "%d\n");
 354 spi_transport_rd_attr(qas, "%d\n");
 355 spi_transport_rd_attr(wr_flow, "%d\n");
 356 spi_transport_rd_attr(rd_strm, "%d\n");
 357 spi_transport_rd_attr(rti, "%d\n");
 358 spi_transport_rd_attr(pcomp_en, "%d\n");
 359 spi_transport_rd_attr(hold_mcs, "%d\n");
 360
 361 /* we only care about the first child device so we return 1 */
 362 static int child_iter(struct device *dev, void *data)
 363 {
 364         struct scsi_device *sdev = to_scsi_device(dev);
 365
 366         spi_dv_device(sdev);
 367         return 1;
 368 }
 369
 370 static ssize_t
 371 store_spi_revalidate(struct class_device *cdev, const char *buf, size_t count)
 372 {
 373         struct scsi_target *starget = transport_class_to_starget(cdev);
 374
 375         device_for_each_child(&starget->dev, NULL, child_iter);
 376         return count;
 377 }
 378 static CLASS_DEVICE_ATTR(revalidate, S_IWUSR, NULL, store_spi_revalidate);
 379
 380 /* Translate the period into ns according to the current spec
 381  * for SDTR/PPR messages */
 382 static int period_to_str(char *buf, int period)
 383 {
 384         int len, picosec;
 385
 386         if (period < 0 || period > 0xff) {
 387                 picosec = -1;
 388         } else if (period <= SPI_STATIC_PPR) {
 389                 picosec = ppr_to_ps[period];
 390         } else {
 391                 picosec = period * 4000;
 392         }
 393
 394         if (picosec == -1) {
 395                 len = sprintf(buf, "reserved");
 396         } else {
 397                 len = sprint_frac(buf, picosec, 1000);
 398         }
 399
 400         return len;
 401 }
 402
 403 static ssize_t
 404 show_spi_transport_period_helper(char *buf, int period)
 405 {
 406         int len = period_to_str(buf, period);
 407         buf[len++] = '\n';
 408         buf[len] = '\0';
 409         return len;
 410 }
 411
 412 static ssize_t
 413 store_spi_transport_period_helper(struct class_device *cdev, const char *buf,
 414                                   size_t count, int *periodp)
 415 {
 416         int j, picosec, period = -1;
 417         char *endp;
 418
 419         picosec = simple_strtoul(buf, &endp, 10) * 1000;
 420         if (*endp == '.') {
 421                 int mult = 100;
 422                 do {
 423                         endp++;
 424                         if (!isdigit(*endp))
 425                                 break;
 426                         picosec += (*endp - '0') * mult;
 427                         mult /= 10;
 428                 } while (mult > 0);
 429         }
 430
 431         for (j = 0; j <= SPI_STATIC_PPR; j++) {
 432                 if (ppr_to_ps[j] < picosec)
 433                         continue;
 434                 period = j;
 435                 break;
 436         }
 437
 438         if (period == -1)
 439                 period = picosec / 4000;
 440
 441         if (period > 0xff)
 442                 period = 0xff;
 443
 444         *periodp = period;
 445
 446         return count;
 447 }
 448
 449 static ssize_t
 450 show_spi_transport_period(struct class_device *cdev, char *buf)
 451 {
 452         struct scsi_target *starget = transport_class_to_starget(cdev);
 453         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 454         struct spi_internal *i = to_spi_internal(shost->transportt);
 455         struct spi_transport_attrs *tp =
 456                 (struct spi_transport_attrs *)&starget->starget_data;
 457
 458         if (i->f->get_period)
 459                 i->f->get_period(starget);
 460
 461         return show_spi_transport_period_helper(buf, tp->period);
 462 }
 463
 464 static ssize_t
 465 store_spi_transport_period(struct class_device *cdev, const char *buf,
 466                             size_t count)
 467 {
 468         struct scsi_target *starget = transport_class_to_starget(cdev);
 469         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 470         struct spi_internal *i = to_spi_internal(shost->transportt);
 471         struct spi_transport_attrs *tp =
 472                 (struct spi_transport_attrs *)&starget->starget_data;
 473         int period, retval;
 474
 475         retval = store_spi_transport_period_helper(cdev, buf, count, &period);
 476
 477         if (period < tp->min_period)
 478                 period = tp->min_period;
 479
 480         i->f->set_period(starget, period);
 481
 482         return retval;
 483 }
 484
 485 static CLASS_DEVICE_ATTR(period, S_IRUGO | S_IWUSR,
 486                          show_spi_transport_period,
 487                          store_spi_transport_period);
 488
 489 static ssize_t
 490 show_spi_transport_min_period(struct class_device *cdev, char *buf)
 491 {
 492         struct scsi_target *starget = transport_class_to_starget(cdev);
 493         struct spi_transport_attrs *tp =
 494                 (struct spi_transport_attrs *)&starget->starget_data;
 495
 496         return show_spi_transport_period_helper(buf, tp->min_period);
 497 }
 498
 499 static ssize_t
 500 store_spi_transport_min_period(struct class_device *cdev, const char *buf,
 501                             size_t count)
 502 {
 503         struct scsi_target *starget = transport_class_to_starget(cdev);
 504         struct spi_transport_attrs *tp =
 505                 (struct spi_transport_attrs *)&starget->starget_data;
 506
 507         return store_spi_transport_period_helper(cdev, buf, count,
 508                                                  &tp->min_period);
 509 }
 510
 511
 512 static CLASS_DEVICE_ATTR(min_period, S_IRUGO | S_IWUSR,
 513                          show_spi_transport_min_period,
 514                          store_spi_transport_min_period);
 515
 516
 517 static ssize_t show_spi_host_signalling(struct class_device *cdev, char *buf)
 518 {
 519         struct Scsi_Host *shost = transport_class_to_shost(cdev);
 520         struct spi_internal *i = to_spi_internal(shost->transportt);
 521
 522         if (i->f->get_signalling)
 523                 i->f->get_signalling(shost);
 524
 525         return sprintf(buf, "%s\n", spi_signal_to_string(spi_signalling(shost)));
 526 }
 527 static ssize_t store_spi_host_signalling(struct class_device *cdev,
 528                                          const char *buf, size_t count)
 529 {
 530         struct Scsi_Host *shost = transport_class_to_shost(cdev);
 531         struct spi_internal *i = to_spi_internal(shost->transportt);
 532         enum spi_signal_type type = spi_signal_to_value(buf);
 533
 534         if (type != SPI_SIGNAL_UNKNOWN)
 535                 i->f->set_signalling(shost, type);
 536
 537         return count;
 538 }
 539 static CLASS_DEVICE_ATTR(signalling, S_IRUGO | S_IWUSR,
 540                          show_spi_host_signalling,
 541                          store_spi_host_signalling);
 542
 543 #define DV_SET(x, y)                    \
 544         if(i->f->set_##x)               \
 545                 i->f->set_##x(sdev->sdev_target, y)
 546
 547 enum spi_compare_returns {
 548         SPI_COMPARE_SUCCESS,
 549         SPI_COMPARE_FAILURE,
 550         SPI_COMPARE_SKIP_TEST,
 551 };
 552
 553
 554 /* This is for read/write Domain Validation:  If the device supports
 555  * an echo buffer, we do read/write tests to it */
 556 static enum spi_compare_returns
 557 spi_dv_device_echo_buffer(struct scsi_device *sdev, u8 *buffer,
 558                           u8 *ptr, const int retries)
 559 {
 560         int len = ptr - buffer;
 561         int j, k, r, result;
 562         unsigned int pattern = 0x0000ffff;
 563         struct scsi_sense_hdr sshdr;
 564
 565         const char spi_write_buffer[] = {
 566                 WRITE_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
 567         };
 568         const char spi_read_buffer[] = {
 569                 READ_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
 570         };
 571
 572         /* set up the pattern buffer.  Doesn't matter if we spill
 573          * slightly beyond since that's where the read buffer is */
 574         for (j = 0; j < len; ) {
 575
 576                 /* fill the buffer with counting (test a) */
 577                 for ( ; j < min(len, 32); j++)
 578                         buffer[j] = j;
 579                 k = j;
 580                 /* fill the buffer with alternating words of 0x0 and
 581                  * 0xffff (test b) */
 582                 for ( ; j < min(len, k + 32); j += 2) {
 583                         u16 *word = (u16 *)&buffer[j];
 584
 585                         *word = (j & 0x02) ? 0x0000 : 0xffff;
 586                 }
 587                 k = j;
 588                 /* fill with crosstalk (alternating 0x5555 0xaaa)
 589                  * (test c) */
 590                 for ( ; j < min(len, k + 32); j += 2) {
 591                         u16 *word = (u16 *)&buffer[j];
 592
 593                         *word = (j & 0x02) ? 0x5555 : 0xaaaa;
 594                 }
 595                 k = j;
 596                 /* fill with shifting bits (test d) */
 597                 for ( ; j < min(len, k + 32); j += 4) {
 598                         u32 *word = (unsigned int *)&buffer[j];
 599                         u32 roll = (pattern & 0x80000000) ? 1 : 0;
 600
 601                         *word = pattern;
 602                         pattern = (pattern << 1) | roll;
 603                 }
 604                 /* don't bother with random data (test e) */
 605         }
 606
 607         for (r = 0; r < retries; r++) {
 608                 result = spi_execute(sdev, spi_write_buffer, DMA_TO_DEVICE,
 609                                      buffer, len, &sshdr);
 610                 if(result || !scsi_device_online(sdev)) {
 611
 612                         scsi_device_set_state(sdev, SDEV_QUIESCE);
 613                         if (scsi_sense_valid(&sshdr)
 614                             && sshdr.sense_key == ILLEGAL_REQUEST
 615                             /* INVALID FIELD IN CDB */
 616                             && sshdr.asc == 0x24 && sshdr.ascq == 0x00)
 617                                 /* This would mean that the drive lied
 618                                  * to us about supporting an echo
 619                                  * buffer (unfortunately some Western
 620                                  * Digital drives do precisely this)
 621                                  */
 622                                 return SPI_COMPARE_SKIP_TEST;
 623
 624
 625                         sdev_printk(KERN_ERR, sdev, "Write Buffer failure %x\n", result);
 626                         return SPI_COMPARE_FAILURE;
 627                 }
 628
 629                 memset(ptr, 0, len);
 630                 spi_execute(sdev, spi_read_buffer, DMA_FROM_DEVICE,
 631                             ptr, len, NULL);
 632                 scsi_device_set_state(sdev, SDEV_QUIESCE);
 633
 634                 if (memcmp(buffer, ptr, len) != 0)
 635                         return SPI_COMPARE_FAILURE;
 636         }
 637         return SPI_COMPARE_SUCCESS;
 638 }
 639
 640 /* This is for the simplest form of Domain Validation: a read test
 641  * on the inquiry data from the device */
 642 static enum spi_compare_returns
 643 spi_dv_device_compare_inquiry(struct scsi_device *sdev, u8 *buffer,
 644                               u8 *ptr, const int retries)
 645 {
 646         int r, result;
 647         const int len = sdev->inquiry_len;
 648         const char spi_inquiry[] = {
 649                 INQUIRY, 0, 0, 0, len, 0
 650         };
 651
 652         for (r = 0; r < retries; r++) {
 653                 memset(ptr, 0, len);
 654
 655                 result = spi_execute(sdev, spi_inquiry, DMA_FROM_DEVICE,
 656                                      ptr, len, NULL);
 657
 658                 if(result || !scsi_device_online(sdev)) {
 659                         scsi_device_set_state(sdev, SDEV_QUIESCE);
 660                         return SPI_COMPARE_FAILURE;
 661                 }
 662
 663                 /* If we don't have the inquiry data already, the
 664                  * first read gets it */
 665                 if (ptr == buffer) {
 666                         ptr += len;
 667                         --r;
 668                         continue;
 669                 }
 670
 671                 if (memcmp(buffer, ptr, len) != 0)
 672                         /* failure */
 673                         return SPI_COMPARE_FAILURE;
 674         }
 675         return SPI_COMPARE_SUCCESS;
 676 }
 677
 678 static enum spi_compare_returns
 679 spi_dv_retrain(struct scsi_device *sdev, u8 *buffer, u8 *ptr,
 680                enum spi_compare_returns
 681                (*compare_fn)(struct scsi_device *, u8 *, u8 *, int))
 682 {
 683         struct spi_internal *i = to_spi_internal(sdev->host->transportt);
 684         struct scsi_target *starget = sdev->sdev_target;
 685         int period = 0, prevperiod = 0;
 686         enum spi_compare_returns retval;
 687
 688
 689         for (;;) {
 690                 int newperiod;
 691                 retval = compare_fn(sdev, buffer, ptr, DV_LOOPS);
 692
 693                 if (retval == SPI_COMPARE_SUCCESS
 694                     || retval == SPI_COMPARE_SKIP_TEST)
 695                         break;
 696
 697                 /* OK, retrain, fallback */
 698                 if (i->f->get_iu)
 699                         i->f->get_iu(starget);
 700                 if (i->f->get_qas)
 701                         i->f->get_qas(starget);
 702                 if (i->f->get_period)
 703                         i->f->get_period(sdev->sdev_target);
 704
 705                 /* Here's the fallback sequence; first try turning off
 706                  * IU, then QAS (if we can control them), then finally
 707                  * fall down the periods */
 708                 if (i->f->set_iu && spi_iu(starget)) {
 709                         starget_printk(KERN_ERR, starget, "Domain Validation Disabing Information Units\n");
 710                         DV_SET(iu, 0);
 711                 } else if (i->f->set_qas && spi_qas(starget)) {
 712                         starget_printk(KERN_ERR, starget, "Domain Validation Disabing Quick Arbitration and Selection\n");
 713                         DV_SET(qas, 0);
 714                 } else {
 715                         newperiod = spi_period(starget);
 716                         period = newperiod > period ? newperiod : period;
 717                         if (period < 0x0d)
 718                                 period++;
 719                         else
 720                                 period += period >> 1;
 721
 722                         if (unlikely(period > 0xff || period == prevperiod)) {
 723                                 /* Total failure; set to async and return */
 724                                 starget_printk(KERN_ERR, starget, "Domain Validation Failure, dropping back to Asynchronous\n");
 725                                 DV_SET(offset, 0);
 726                                 return SPI_COMPARE_FAILURE;
 727                         }
 728                         starget_printk(KERN_ERR, starget, "Domain Validation detected failure, dropping back\n");
 729                         DV_SET(period, period);
 730                         prevperiod = period;
 731                 }
 732         }
 733         return retval;
 734 }
 735
 736 static int
 737 spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
 738 {
 739         int l, result;
 740
 741         /* first off do a test unit ready.  This can error out
 742          * because of reservations or some other reason.  If it
 743          * fails, the device won't let us write to the echo buffer
 744          * so just return failure */
 745
 746         const char spi_test_unit_ready[] = {
 747                 TEST_UNIT_READY, 0, 0, 0, 0, 0
 748         };
 749
 750         const char spi_read_buffer_descriptor[] = {
 751                 READ_BUFFER, 0x0b, 0, 0, 0, 0, 0, 0, 4, 0
 752         };
 753
 754
 755         /* We send a set of three TURs to clear any outstanding
 756          * unit attention conditions if they exist (Otherwise the
 757          * buffer tests won't be happy).  If the TUR still fails
 758          * (reservation conflict, device not ready, etc) just
 759          * skip the write tests */
 760         for (l = 0; ; l++) {
 761                 result = spi_execute(sdev, spi_test_unit_ready, DMA_NONE,
 762                                      NULL, 0, NULL);
 763
 764                 if(result) {
 765                         if(l >= 3)
 766                                 return 0;
 767                 } else {
 768                         /* TUR succeeded */
 769                         break;
 770                 }
 771         }
 772
 773         result = spi_execute(sdev, spi_read_buffer_descriptor,
 774                              DMA_FROM_DEVICE, buffer, 4, NULL);
 775
 776         if (result)
 777                 /* Device has no echo buffer */
 778                 return 0;
 779
 780         return buffer[3] + ((buffer[2] & 0x1f) << 8);
 781 }
 782
 783 static void
 784 spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
 785 {
 786         struct spi_internal *i = to_spi_internal(sdev->host->transportt);
 787         struct scsi_target *starget = sdev->sdev_target;
 788         struct Scsi_Host *shost = sdev->host;
 789         int len = sdev->inquiry_len;
 790         int min_period = spi_min_period(starget);
 791         int max_width = spi_max_width(starget);
 792         /* first set us up for narrow async */
 793         DV_SET(offset, 0);
 794         DV_SET(width, 0);
 795
 796         if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
 797             != SPI_COMPARE_SUCCESS) {
 798                 starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
 799                 /* FIXME: should probably offline the device here? */
 800                 return;
 801         }
 802
 803         if (!scsi_device_wide(sdev)) {
 804                 spi_max_width(starget) = 0;
 805                 max_width = 0;
 806         }
 807
 808         /* test width */
 809         if (i->f->set_width && max_width) {
 810                 i->f->set_width(starget, 1);
 811
 812                 if (spi_dv_device_compare_inquiry(sdev, buffer,
 813                                                    buffer + len,
 814                                                    DV_LOOPS)
 815                     != SPI_COMPARE_SUCCESS) {
 816                         starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
 817                         i->f->set_width(starget, 0);
 818                         /* Make sure we don't force wide back on by asking
 819                          * for a transfer period that requires it */
 820                         max_width = 0;
 821                         if (min_period < 10)
 822                                 min_period = 10;
 823                 }
 824         }
 825
 826         if (!i->f->set_period)
 827                 return;
 828
 829         /* device can't handle synchronous */
 830         if (!scsi_device_sync(sdev) && !scsi_device_dt(sdev))
 831                 return;
 832
 833         /* len == -1 is the signal that we need to ascertain the
 834          * presence of an echo buffer before trying to use it.  len ==
 835          * 0 means we don't have an echo buffer */
 836         len = -1;
 837
 838  retry:
 839
 840         /* now set up to the maximum */
 841         DV_SET(offset, spi_max_offset(starget));
 842         DV_SET(period, min_period);
 843
 844         /* try QAS requests; this should be harmless to set if the
 845          * target supports it */
 846         if (scsi_device_qas(sdev)) {
 847                 DV_SET(qas, 1);
 848         } else {
 849                 DV_SET(qas, 0);
 850         }
 851
 852         if (scsi_device_ius(sdev) && min_period < 9) {
 853                 /* This u320 (or u640). Set IU transfers */
 854                 DV_SET(iu, 1);
 855                 /* Then set the optional parameters */
 856                 DV_SET(rd_strm, 1);
 857                 DV_SET(wr_flow, 1);
 858                 DV_SET(rti, 1);
 859                 if (min_period == 8)
 860                         DV_SET(pcomp_en, 1);
 861         } else {
 862                 DV_SET(iu, 0);
 863         }
 864
 865         /* now that we've done all this, actually check the bus
 866          * signal type (if known).  Some devices are stupid on
 867          * a SE bus and still claim they can try LVD only settings */
 868         if (i->f->get_signalling)
 869                 i->f->get_signalling(shost);
 870         if (spi_signalling(shost) == SPI_SIGNAL_SE ||
 871             spi_signalling(shost) == SPI_SIGNAL_HVD ||
 872             !scsi_device_dt(sdev)) {
 873                 DV_SET(dt, 0);
 874         } else {
 875                 DV_SET(dt, 1);
 876         }
 877         /* set width last because it will pull all the other
 878          * parameters down to required values */
 879         DV_SET(width, max_width);
 880
 881         /* Do the read only INQUIRY tests */
 882         spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
 883                        spi_dv_device_compare_inquiry);
 884         /* See if we actually managed to negotiate and sustain DT */
 885         if (i->f->get_dt)
 886                 i->f->get_dt(starget);
 887
 888         /* see if the device has an echo buffer.  If it does we can do
 889          * the SPI pattern write tests.  Because of some broken
 890          * devices, we *only* try this on a device that has actually
 891          * negotiated DT */
 892
 893         if (len == -1 && spi_dt(starget))
 894                 len = spi_dv_device_get_echo_buffer(sdev, buffer);
 895
 896         if (len <= 0) {
 897                 starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
 898                 return;
 899         }
 900
 901         if (len > SPI_MAX_ECHO_BUFFER_SIZE) {
 902                 starget_printk(KERN_WARNING, starget, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
 903                 len = SPI_MAX_ECHO_BUFFER_SIZE;
 904         }
 905
 906         if (spi_dv_retrain(sdev, buffer, buffer + len,
 907                            spi_dv_device_echo_buffer)
 908             == SPI_COMPARE_SKIP_TEST) {
 909                 /* OK, the stupid drive can't do a write echo buffer
 910                  * test after all, fall back to the read tests */
 911                 len = 0;
 912                 goto retry;
 913         }
 914 }
 915
 916
 917 /**     spi_dv_device - Do Domain Validation on the device
 918  *      @sdev:          scsi device to validate
 919  *
 920  *      Performs the domain validation on the given device in the
 921  *      current execution thread.  Since DV operations may sleep,
 922  *      the current thread must have user context.  Also no SCSI
 923  *      related locks that would deadlock I/O issued by the DV may
 924  *      be held.
 925  */
 926 void
 927 spi_dv_device(struct scsi_device *sdev)
 928 {
 929         struct scsi_target *starget = sdev->sdev_target;
 930         u8 *buffer;
 931         const int len = SPI_MAX_ECHO_BUFFER_SIZE*2;
 932
 933         if (unlikely(scsi_device_get(sdev)))
 934                 return;
 935
 936         if (unlikely(spi_dv_in_progress(starget)))
 937                 return;
 938         spi_dv_in_progress(starget) = 1;
 939
 940         buffer = kzalloc(len, GFP_KERNEL);
 941
 942         if (unlikely(!buffer))
 943                 goto out_put;
 944
 945         /* We need to verify that the actual device will quiesce; the
 946          * later target quiesce is just a nice to have */
 947         if (unlikely(scsi_device_quiesce(sdev)))
 948                 goto out_free;
 949
 950         scsi_target_quiesce(starget);
 951
 952         spi_dv_pending(starget) = 1;
 953         mutex_lock(&spi_dv_mutex(starget));
 954
 955         starget_printk(KERN_INFO, starget, "Beginning Domain Validation\n");
 956
 957         spi_dv_device_internal(sdev, buffer);
 958
 959         starget_printk(KERN_INFO, starget, "Ending Domain Validation\n");
 960
 961         mutex_unlock(&spi_dv_mutex(starget));
 962         spi_dv_pending(starget) = 0;
 963
 964         scsi_target_resume(starget);
 965
 966         spi_initial_dv(starget) = 1;
 967
 968  out_free:
 969         kfree(buffer);
 970  out_put:
 971         spi_dv_in_progress(starget) = 0;
 972         scsi_device_put(sdev);
 973 }
 974 EXPORT_SYMBOL(spi_dv_device);
 975
 976 struct work_queue_wrapper {
 977         struct work_struct      work;
 978         struct scsi_device      *sdev;
 979 };
 980
 981 static void
 982 spi_dv_device_work_wrapper(struct work_struct *work)
 983 {
 984         struct work_queue_wrapper *wqw =
 985                 container_of(work, struct work_queue_wrapper, work);
 986         struct scsi_device *sdev = wqw->sdev;
 987
 988         kfree(wqw);
 989         spi_dv_device(sdev);
 990         spi_dv_pending(sdev->sdev_target) = 0;
 991         scsi_device_put(sdev);
 992 }
 993
 994
 995 /**
 996  *      spi_schedule_dv_device - schedule domain validation to occur on the device
 997  *      @sdev:  The device to validate
 998  *
 999  *      Identical to spi_dv_device() above, except that the DV will be
1000  *      scheduled to occur in a workqueue later.  All memory allocations
1001  *      are atomic, so may be called from any context including those holding
1002  *      SCSI locks.
1003  */
1004 void
1005 spi_schedule_dv_device(struct scsi_device *sdev)
1006 {
1007         struct work_queue_wrapper *wqw =
1008                 kmalloc(sizeof(struct work_queue_wrapper), GFP_ATOMIC);
1009
1010         if (unlikely(!wqw))
1011                 return;
1012
1013         if (unlikely(spi_dv_pending(sdev->sdev_target))) {
1014                 kfree(wqw);
1015                 return;
1016         }
1017         /* Set pending early (dv_device doesn't check it, only sets it) */
1018         spi_dv_pending(sdev->sdev_target) = 1;
1019         if (unlikely(scsi_device_get(sdev))) {
1020                 kfree(wqw);
1021                 spi_dv_pending(sdev->sdev_target) = 0;
1022                 return;
1023         }
1024
1025         INIT_WORK(&wqw->work, spi_dv_device_work_wrapper);
1026         wqw->sdev = sdev;
1027
1028         schedule_work(&wqw->work);
1029 }
1030 EXPORT_SYMBOL(spi_schedule_dv_device);
1031
1032 /**
1033  * spi_display_xfer_agreement - Print the current target transfer agreement
1034  * @starget: The target for which to display the agreement
1035  *
1036  * Each SPI port is required to maintain a transfer agreement for each
1037  * other port on the bus.  This function prints a one-line summary of
1038  * the current agreement; more detailed information is available in sysfs.
1039  */
1040 void spi_display_xfer_agreement(struct scsi_target *starget)
1041 {
1042         struct spi_transport_attrs *tp;
1043         tp = (struct spi_transport_attrs *)&starget->starget_data;
1044
1045         if (tp->offset > 0 && tp->period > 0) {
1046                 unsigned int picosec, kb100;
1047                 char *scsi = "FAST-?";
1048                 char tmp[8];
1049
1050                 if (tp->period <= SPI_STATIC_PPR) {
1051                         picosec = ppr_to_ps[tp->period];
1052                         switch (tp->period) {
1053                                 case  7: scsi = "FAST-320"; break;
1054                                 case  8: scsi = "FAST-160"; break;
1055                                 case  9: scsi = "FAST-80"; break;
1056                                 case 10:
1057                                 case 11: scsi = "FAST-40"; break;
1058                                 case 12: scsi = "FAST-20"; break;
1059                         }
1060                 } else {
1061                         picosec = tp->period * 4000;
1062                         if (tp->period < 25)
1063                                 scsi = "FAST-20";
1064                         else if (tp->period < 50)
1065                                 scsi = "FAST-10";
1066                         else
1067                                 scsi = "FAST-5";
1068                 }
1069
1070                 kb100 = (10000000 + picosec / 2) / picosec;
1071                 if (tp->width)
1072                         kb100 *= 2;
1073                 sprint_frac(tmp, picosec, 1000);
1074
1075                 dev_info(&starget->dev,
1076                          "%s %sSCSI %d.%d MB/s %s%s%s%s%s%s%s%s (%s ns, offset %d)\n",
1077                          scsi, tp->width ? "WIDE " : "", kb100/10, kb100 % 10,
1078                          tp->dt ? "DT" : "ST",
1079                          tp->iu ? " IU" : "",
1080                          tp->qas  ? " QAS" : "",
1081                          tp->rd_strm ? " RDSTRM" : "",
1082                          tp->rti ? " RTI" : "",
1083                          tp->wr_flow ? " WRFLOW" : "",
1084                          tp->pcomp_en ? " PCOMP" : "",
1085                          tp->hold_mcs ? " HMCS" : "",
1086                          tmp, tp->offset);
1087         } else {
1088                 dev_info(&starget->dev, "%sasynchronous\n",
1089                                 tp->width ? "wide " : "");
1090         }
1091 }
1092 EXPORT_SYMBOL(spi_display_xfer_agreement);
1093
1094 int spi_populate_width_msg(unsigned char *msg, int width)
1095 {
1096         msg[0] = EXTENDED_MESSAGE;
1097         msg[1] = 2;
1098         msg[2] = EXTENDED_WDTR;
1099         msg[3] = width;
1100         return 4;
1101 }
1102 EXPORT_SYMBOL_GPL(spi_populate_width_msg);
1103
1104 int spi_populate_sync_msg(unsigned char *msg, int period, int offset)
1105 {
1106         msg[0] = EXTENDED_MESSAGE;
1107         msg[1] = 3;
1108         msg[2] = EXTENDED_SDTR;
1109         msg[3] = period;
1110         msg[4] = offset;
1111         return 5;
1112 }
1113 EXPORT_SYMBOL_GPL(spi_populate_sync_msg);
1114
1115 int spi_populate_ppr_msg(unsigned char *msg, int period, int offset,
1116                 int width, int options)
1117 {
1118         msg[0] = EXTENDED_MESSAGE;
1119         msg[1] = 6;
1120         msg[2] = EXTENDED_PPR;
1121         msg[3] = period;
1122         msg[4] = 0;
1123         msg[5] = offset;
1124         msg[6] = width;
1125         msg[7] = options;
1126         return 8;
1127 }
1128 EXPORT_SYMBOL_GPL(spi_populate_ppr_msg);
1129
1130 #ifdef CONFIG_SCSI_CONSTANTS
1131 static const char * const one_byte_msgs[] = {
1132 /* 0x00 */ "Task Complete", NULL /* Extended Message */, "Save Pointers",
1133 /* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
1134 /* 0x06 */ "Abort Task Set", "Message Reject", "Nop", "Message Parity Error",
1135 /* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
1136 /* 0x0c */ "Target Reset", "Abort Task", "Clear Task Set",
1137 /* 0x0f */ "Initiate Recovery", "Release Recovery",
1138 /* 0x11 */ "Terminate Process", "Continue Task", "Target Transfer Disable",
1139 /* 0x14 */ NULL, NULL, "Clear ACA", "LUN Reset"
1140 };
1141
1142 static const char * const two_byte_msgs[] = {
1143 /* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag",
1144 /* 0x23 */ "Ignore Wide Residue", "ACA"
1145 };
1146
1147 static const char * const extended_msgs[] = {
1148 /* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
1149 /* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request",
1150 /* 0x04 */ "Parallel Protocol Request", "Modify Bidirectional Data Pointer"
1151 };
1152
1153 static void print_nego(const unsigned char *msg, int per, int off, int width)
1154 {
1155         if (per) {
1156                 char buf[20];
1157                 period_to_str(buf, msg[per]);
1158                 printk("period = %s ns ", buf);
1159         }
1160
1161         if (off)
1162                 printk("offset = %d ", msg[off]);
1163         if (width)
1164                 printk("width = %d ", 8 << msg[width]);
1165 }
1166
1167 static void print_ptr(const unsigned char *msg, int msb, const char *desc)
1168 {
1169         int ptr = (msg[msb] << 24) | (msg[msb+1] << 16) | (msg[msb+2] << 8) |
1170                         msg[msb+3];
1171         printk("%s = %d ", desc, ptr);
1172 }
1173
1174 int spi_print_msg(const unsigned char *msg)
1175 {
1176         int len = 1, i;
1177         if (msg[0] == EXTENDED_MESSAGE) {
1178                 len = 2 + msg[1];
1179                 if (len == 2)
1180                         len += 256;
1181                 if (msg[2] < ARRAY_SIZE(extended_msgs))
1182                         printk ("%s ", extended_msgs[msg[2]]);
1183                 else
1184                         printk ("Extended Message, reserved code (0x%02x) ",
1185                                 (int) msg[2]);
1186                 switch (msg[2]) {
1187                 case EXTENDED_MODIFY_DATA_POINTER:
1188                         print_ptr(msg, 3, "pointer");
1189                         break;
1190                 case EXTENDED_SDTR:
1191                         print_nego(msg, 3, 4, 0);
1192                         break;
1193                 case EXTENDED_WDTR:
1194                         print_nego(msg, 0, 0, 3);
1195                         break;
1196                 case EXTENDED_PPR:
1197                         print_nego(msg, 3, 5, 6);
1198                         break;
1199                 case EXTENDED_MODIFY_BIDI_DATA_PTR:
1200                         print_ptr(msg, 3, "out");
1201                         print_ptr(msg, 7, "in");
1202                         break;
1203                 default:
1204                 for (i = 2; i < len; ++i)
1205                         printk("%02x ", msg[i]);
1206                 }
1207         /* Identify */
1208         } else if (msg[0] & 0x80) {
1209                 printk("Identify disconnect %sallowed %s %d ",
1210                         (msg[0] & 0x40) ? "" : "not ",
1211                         (msg[0] & 0x20) ? "target routine" : "lun",
1212                         msg[0] & 0x7);
1213         /* Normal One byte */
1214         } else if (msg[0] < 0x1f) {
1215                 if (msg[0] < ARRAY_SIZE(one_byte_msgs) && one_byte_msgs[msg[0]])
1216                         printk("%s ", one_byte_msgs[msg[0]]);
1217                 else
1218                         printk("reserved (%02x) ", msg[0]);
1219         } else if (msg[0] == 0x55) {
1220                 printk("QAS Request ");
1221         /* Two byte */
1222         } else if (msg[0] <= 0x2f) {
1223                 if ((msg[0] - 0x20) < ARRAY_SIZE(two_byte_msgs))
1224                         printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
1225                                 msg[1]);
1226                 else
1227                         printk("reserved two byte (%02x %02x) ",
1228                                 msg[0], msg[1]);
1229                 len = 2;
1230         } else
1231                 printk("reserved ");
1232         return len;
1233 }
1234 EXPORT_SYMBOL(spi_print_msg);
1235
1236 #else  /* ifndef CONFIG_SCSI_CONSTANTS */
1237
1238 int spi_print_msg(const unsigned char *msg)
1239 {
1240         int len = 1, i;
1241
1242         if (msg[0] == EXTENDED_MESSAGE) {
1243                 len = 2 + msg[1];
1244                 if (len == 2)
1245                         len += 256;
1246                 for (i = 0; i < len; ++i)
1247                         printk("%02x ", msg[i]);
1248         /* Identify */
1249         } else if (msg[0] & 0x80) {
1250                 printk("%02x ", msg[0]);
1251         /* Normal One byte */
1252         } else if ((msg[0] < 0x1f) || (msg[0] == 0x55)) {
1253                 printk("%02x ", msg[0]);
1254         /* Two byte */
1255         } else if (msg[0] <= 0x2f) {
1256                 printk("%02x %02x", msg[0], msg[1]);
1257                 len = 2;
1258         } else
1259                 printk("%02x ", msg[0]);
1260         return len;
1261 }
1262 EXPORT_SYMBOL(spi_print_msg);
1263 #endif /* ! CONFIG_SCSI_CONSTANTS */
1264
1265 #define SETUP_ATTRIBUTE(field)                                          \
1266         i->private_attrs[count] = class_device_attr_##field;            \
1267         if (!i->f->set_##field) {                                       \
1268                 i->private_attrs[count].attr.mode = S_IRUGO;            \
1269                 i->private_attrs[count].store = NULL;                   \
1270         }                                                               \
1271         i->attrs[count] = &i->private_attrs[count];                     \
1272         if (i->f->show_##field)                                         \
1273                 count++
1274
1275 #define SETUP_RELATED_ATTRIBUTE(field, rel_field)                       \
1276         i->private_attrs[count] = class_device_attr_##field;            \
1277         if (!i->f->set_##rel_field) {                                   \
1278                 i->private_attrs[count].attr.mode = S_IRUGO;            \
1279                 i->private_attrs[count].store = NULL;                   \
1280         }                                                               \
1281         i->attrs[count] = &i->private_attrs[count];                     \
1282         if (i->f->show_##rel_field)                                     \
1283                 count++
1284
1285 #define SETUP_HOST_ATTRIBUTE(field)                                     \
1286         i->private_host_attrs[count] = class_device_attr_##field;       \
1287         if (!i->f->set_##field) {                                       \
1288                 i->private_host_attrs[count].attr.mode = S_IRUGO;       \
1289                 i->private_host_attrs[count].store = NULL;              \
1290         }                                                               \
1291         i->host_attrs[count] = &i->private_host_attrs[count];           \
1292         count++
1293
1294 static int spi_device_match(struct attribute_container *cont,
1295                             struct device *dev)
1296 {
1297         struct scsi_device *sdev;
1298         struct Scsi_Host *shost;
1299         struct spi_internal *i;
1300
1301         if (!scsi_is_sdev_device(dev))
1302                 return 0;
1303
1304         sdev = to_scsi_device(dev);
1305         shost = sdev->host;
1306         if (!shost->transportt  || shost->transportt->host_attrs.ac.class
1307             != &spi_host_class.class)
1308                 return 0;
1309         /* Note: this class has no device attributes, so it has
1310          * no per-HBA allocation and thus we don't need to distinguish
1311          * the attribute containers for the device */
1312         i = to_spi_internal(shost->transportt);
1313         if (i->f->deny_binding && i->f->deny_binding(sdev->sdev_target))
1314                 return 0;
1315         return 1;
1316 }
1317
1318 static int spi_target_match(struct attribute_container *cont,
1319                             struct device *dev)
1320 {
1321         struct Scsi_Host *shost;
1322         struct scsi_target *starget;
1323         struct spi_internal *i;
1324
1325         if (!scsi_is_target_device(dev))
1326                 return 0;
1327
1328         shost = dev_to_shost(dev->parent);
1329         if (!shost->transportt  || shost->transportt->host_attrs.ac.class
1330             != &spi_host_class.class)
1331                 return 0;
1332
1333         i = to_spi_internal(shost->transportt);
1334         starget = to_scsi_target(dev);
1335
1336         if (i->f->deny_binding && i->f->deny_binding(starget))
1337                 return 0;
1338
1339         return &i->t.target_attrs.ac == cont;
1340 }
1341
1342 static DECLARE_TRANSPORT_CLASS(spi_transport_class,
1343                                "spi_transport",
1344                                spi_setup_transport_attrs,
1345                                NULL,
1346                                NULL);
1347
1348 static DECLARE_ANON_TRANSPORT_CLASS(spi_device_class,
1349                                     spi_device_match,
1350                                     spi_device_configure);
1351
1352 struct scsi_transport_template *
1353 spi_attach_transport(struct spi_function_template *ft)
1354 {
1355         int count = 0;
1356         struct spi_internal *i = kzalloc(sizeof(struct spi_internal),
1357                                          GFP_KERNEL);
1358
1359         if (unlikely(!i))
1360                 return NULL;
1361
1362         i->t.target_attrs.ac.class = &spi_transport_class.class;
1363         i->t.target_attrs.ac.attrs = &i->attrs[0];
1364         i->t.target_attrs.ac.match = spi_target_match;
1365         transport_container_register(&i->t.target_attrs);
1366         i->t.target_size = sizeof(struct spi_transport_attrs);
1367         i->t.host_attrs.ac.class = &spi_host_class.class;
1368         i->t.host_attrs.ac.attrs = &i->host_attrs[0];
1369         i->t.host_attrs.ac.match = spi_host_match;
1370         transport_container_register(&i->t.host_attrs);
1371         i->t.host_size = sizeof(struct spi_host_attrs);
1372         i->f = ft;
1373
1374         SETUP_ATTRIBUTE(period);
1375         SETUP_RELATED_ATTRIBUTE(min_period, period);
1376         SETUP_ATTRIBUTE(offset);
1377         SETUP_RELATED_ATTRIBUTE(max_offset, offset);
1378         SETUP_ATTRIBUTE(width);
1379         SETUP_RELATED_ATTRIBUTE(max_width, width);
1380         SETUP_ATTRIBUTE(iu);
1381         SETUP_ATTRIBUTE(dt);
1382         SETUP_ATTRIBUTE(qas);
1383         SETUP_ATTRIBUTE(wr_flow);
1384         SETUP_ATTRIBUTE(rd_strm);
1385         SETUP_ATTRIBUTE(rti);
1386         SETUP_ATTRIBUTE(pcomp_en);
1387         SETUP_ATTRIBUTE(hold_mcs);
1388
1389         /* if you add an attribute but forget to increase SPI_NUM_ATTRS
1390          * this bug will trigger */
1391         BUG_ON(count > SPI_NUM_ATTRS);
1392
1393         i->attrs[count++] = &class_device_attr_revalidate;
1394
1395         i->attrs[count] = NULL;
1396
1397         count = 0;
1398         SETUP_HOST_ATTRIBUTE(signalling);
1399
1400         BUG_ON(count > SPI_HOST_ATTRS);
1401
1402         i->host_attrs[count] = NULL;
1403
1404         return &i->t;
1405 }
1406 EXPORT_SYMBOL(spi_attach_transport);
1407
1408 void spi_release_transport(struct scsi_transport_template *t)
1409 {
1410         struct spi_internal *i = to_spi_internal(t);
1411
1412         transport_container_unregister(&i->t.target_attrs);
1413         transport_container_unregister(&i->t.host_attrs);
1414
1415         kfree(i);
1416 }
1417 EXPORT_SYMBOL(spi_release_transport);
1418
1419 static __init int spi_transport_init(void)
1420 {
1421         int error = transport_class_register(&spi_transport_class);
1422         if (error)
1423                 return error;
1424         error = anon_transport_class_register(&spi_device_class);
1425         return transport_class_register(&spi_host_class);
1426 }
1427
1428 static void __exit spi_transport_exit(void)
1429 {
1430         transport_class_unregister(&spi_transport_class);
1431         anon_transport_class_unregister(&spi_device_class);
1432         transport_class_unregister(&spi_host_class);
1433 }
1434
1435 MODULE_AUTHOR("Martin Hicks");
1436 MODULE_DESCRIPTION("SPI Transport Attributes");
1437 MODULE_LICENSE("GPL");
1438
1439 module_init(spi_transport_init);
1440 module_exit(spi_transport_exit);