Merge branch 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
[linux-2.6] / drivers / ide / sgiioc4.c
1 /*
2  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
3  * Copyright (C) 2008 MontaVista Software, Inc.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License
7  * as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it would be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
12  *
13  * You should have received a copy of the GNU General Public
14  * License along with this program; if not, write the Free Software
15  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
16  *
17  * For further information regarding this notice, see:
18  *
19  * http://oss.sgi.com/projects/GenInfo/NoticeExplan
20  */
21
22 #include <linux/module.h>
23 #include <linux/types.h>
24 #include <linux/pci.h>
25 #include <linux/delay.h>
26 #include <linux/init.h>
27 #include <linux/kernel.h>
28 #include <linux/ioport.h>
29 #include <linux/blkdev.h>
30 #include <linux/scatterlist.h>
31 #include <linux/ioc4.h>
32 #include <asm/io.h>
33
34 #include <linux/ide.h>
35
36 #define DRV_NAME "SGIIOC4"
37
38 /* IOC4 Specific Definitions */
39 #define IOC4_CMD_OFFSET         0x100
40 #define IOC4_CTRL_OFFSET        0x120
41 #define IOC4_DMA_OFFSET         0x140
42 #define IOC4_INTR_OFFSET        0x0
43
44 #define IOC4_TIMING             0x00
45 #define IOC4_DMA_PTR_L          0x01
46 #define IOC4_DMA_PTR_H          0x02
47 #define IOC4_DMA_ADDR_L         0x03
48 #define IOC4_DMA_ADDR_H         0x04
49 #define IOC4_BC_DEV             0x05
50 #define IOC4_BC_MEM             0x06
51 #define IOC4_DMA_CTRL           0x07
52 #define IOC4_DMA_END_ADDR       0x08
53
54 /* Bits in the IOC4 Control/Status Register */
55 #define IOC4_S_DMA_START        0x01
56 #define IOC4_S_DMA_STOP         0x02
57 #define IOC4_S_DMA_DIR          0x04
58 #define IOC4_S_DMA_ACTIVE       0x08
59 #define IOC4_S_DMA_ERROR        0x10
60 #define IOC4_ATA_MEMERR         0x02
61
62 /* Read/Write Directions */
63 #define IOC4_DMA_WRITE          0x04
64 #define IOC4_DMA_READ           0x00
65
66 /* Interrupt Register Offsets */
67 #define IOC4_INTR_REG           0x03
68 #define IOC4_INTR_SET           0x05
69 #define IOC4_INTR_CLEAR         0x07
70
71 #define IOC4_IDE_CACHELINE_SIZE 128
72 #define IOC4_CMD_CTL_BLK_SIZE   0x20
73 #define IOC4_SUPPORTED_FIRMWARE_REV 46
74
75 typedef struct {
76         u32 timing_reg0;
77         u32 timing_reg1;
78         u32 low_mem_ptr;
79         u32 high_mem_ptr;
80         u32 low_mem_addr;
81         u32 high_mem_addr;
82         u32 dev_byte_count;
83         u32 mem_byte_count;
84         u32 status;
85 } ioc4_dma_regs_t;
86
87 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
88 /* IOC4 has only 1 IDE channel */
89 #define IOC4_PRD_BYTES       16
90 #define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
91
92
93 static void
94 sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
95                         unsigned long ctrl_port, unsigned long irq_port)
96 {
97         unsigned long reg = data_port;
98         int i;
99
100         /* Registers are word (32 bit) aligned */
101         for (i = 0; i <= 7; i++)
102                 hw->io_ports_array[i] = reg + i * 4;
103
104         hw->io_ports.ctl_addr = ctrl_port;
105         hw->io_ports.irq_addr = irq_port;
106 }
107
108 static int
109 sgiioc4_checkirq(ide_hwif_t * hwif)
110 {
111         unsigned long intr_addr =
112                 hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
113
114         if ((u8)readl((void __iomem *)intr_addr) & 0x03)
115                 return 1;
116
117         return 0;
118 }
119
120 static u8 sgiioc4_read_status(ide_hwif_t *);
121
122 static int
123 sgiioc4_clearirq(ide_drive_t * drive)
124 {
125         u32 intr_reg;
126         ide_hwif_t *hwif = drive->hwif;
127         struct ide_io_ports *io_ports = &hwif->io_ports;
128         unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
129
130         /* Code to check for PCI error conditions */
131         intr_reg = readl((void __iomem *)other_ir);
132         if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
133                 /*
134                  * Using sgiioc4_read_status to read the Status register has a
135                  * side effect of clearing the interrupt.  The first read should
136                  * clear it if it is set.  The second read should return
137                  * a "clear" status if it got cleared.  If not, then spin
138                  * for a bit trying to clear it.
139                  */
140                 u8 stat = sgiioc4_read_status(hwif);
141                 int count = 0;
142
143                 stat = sgiioc4_read_status(hwif);
144                 while ((stat & ATA_BUSY) && (count++ < 100)) {
145                         udelay(1);
146                         stat = sgiioc4_read_status(hwif);
147                 }
148
149                 if (intr_reg & 0x02) {
150                         struct pci_dev *dev = to_pci_dev(hwif->dev);
151                         /* Error when transferring DMA data on PCI bus */
152                         u32 pci_err_addr_low, pci_err_addr_high,
153                             pci_stat_cmd_reg;
154
155                         pci_err_addr_low =
156                                 readl((void __iomem *)io_ports->irq_addr);
157                         pci_err_addr_high =
158                                 readl((void __iomem *)(io_ports->irq_addr + 4));
159                         pci_read_config_dword(dev, PCI_COMMAND,
160                                               &pci_stat_cmd_reg);
161                         printk(KERN_ERR
162                                "%s(%s) : PCI Bus Error when doing DMA:"
163                                    " status-cmd reg is 0x%x\n",
164                                __func__, drive->name, pci_stat_cmd_reg);
165                         printk(KERN_ERR
166                                "%s(%s) : PCI Error Address is 0x%x%x\n",
167                                __func__, drive->name,
168                                pci_err_addr_high, pci_err_addr_low);
169                         /* Clear the PCI Error indicator */
170                         pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
171                 }
172
173                 /* Clear the Interrupt, Error bits on the IOC4 */
174                 writel(0x03, (void __iomem *)other_ir);
175
176                 intr_reg = readl((void __iomem *)other_ir);
177         }
178
179         return intr_reg & 3;
180 }
181
182 static void sgiioc4_dma_start(ide_drive_t *drive)
183 {
184         ide_hwif_t *hwif = drive->hwif;
185         unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
186         unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
187         unsigned int temp_reg = reg | IOC4_S_DMA_START;
188
189         writel(temp_reg, (void __iomem *)ioc4_dma_addr);
190 }
191
192 static u32
193 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
194 {
195         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
196         u32     ioc4_dma;
197         int     count;
198
199         count = 0;
200         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
201         while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
202                 udelay(1);
203                 ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
204         }
205         return ioc4_dma;
206 }
207
208 /* Stops the IOC4 DMA Engine */
209 static int sgiioc4_dma_end(ide_drive_t *drive)
210 {
211         u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
212         ide_hwif_t *hwif = drive->hwif;
213         unsigned long dma_base = hwif->dma_base;
214         int dma_stat = 0;
215         unsigned long *ending_dma = ide_get_hwifdata(hwif);
216
217         writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
218
219         ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
220
221         if (ioc4_dma & IOC4_S_DMA_STOP) {
222                 printk(KERN_ERR
223                        "%s(%s): IOC4 DMA STOP bit is still 1 :"
224                        "ioc4_dma_reg 0x%x\n",
225                        __func__, drive->name, ioc4_dma);
226                 dma_stat = 1;
227         }
228
229         /*
230          * The IOC4 will DMA 1's to the ending dma area to indicate that
231          * previous data DMA is complete.  This is necessary because of relaxed
232          * ordering between register reads and DMA writes on the Altix.
233          */
234         while ((cnt++ < 200) && (!valid)) {
235                 for (num = 0; num < 16; num++) {
236                         if (ending_dma[num]) {
237                                 valid = 1;
238                                 break;
239                         }
240                 }
241                 udelay(1);
242         }
243         if (!valid) {
244                 printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
245                        drive->name);
246                 dma_stat = 1;
247         }
248
249         bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
250         bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
251
252         if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
253                 if (bc_dev > bc_mem + 8) {
254                         printk(KERN_ERR
255                                "%s(%s): WARNING!! byte_count_dev %d "
256                                "!= byte_count_mem %d\n",
257                                __func__, drive->name, bc_dev, bc_mem);
258                 }
259         }
260
261         drive->waiting_for_dma = 0;
262         ide_destroy_dmatable(drive);
263
264         return dma_stat;
265 }
266
267 static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
268 {
269 }
270
271 /* returns 1 if dma irq issued, 0 otherwise */
272 static int sgiioc4_dma_test_irq(ide_drive_t *drive)
273 {
274         return sgiioc4_checkirq(drive->hwif);
275 }
276
277 static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
278 {
279         if (!on)
280                 sgiioc4_clearirq(drive);
281 }
282
283 static void
284 sgiioc4_resetproc(ide_drive_t * drive)
285 {
286         sgiioc4_dma_end(drive);
287         sgiioc4_clearirq(drive);
288 }
289
290 static void
291 sgiioc4_dma_lost_irq(ide_drive_t * drive)
292 {
293         sgiioc4_resetproc(drive);
294
295         ide_dma_lost_irq(drive);
296 }
297
298 static u8 sgiioc4_read_status(ide_hwif_t *hwif)
299 {
300         unsigned long port = hwif->io_ports.status_addr;
301         u8 reg = (u8) readb((void __iomem *) port);
302
303         if (!(reg & ATA_BUSY)) {        /* Not busy... check for interrupt */
304                 unsigned long other_ir = port - 0x110;
305                 unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
306
307                 /* Clear the Interrupt, Error bits on the IOC4 */
308                 if (intr_reg & 0x03) {
309                         writel(0x03, (void __iomem *) other_ir);
310                         intr_reg = (u32) readl((void __iomem *) other_ir);
311                 }
312         }
313
314         return reg;
315 }
316
317 /* Creates a dma map for the scatter-gather list entries */
318 static int __devinit
319 ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
320 {
321         struct pci_dev *dev = to_pci_dev(hwif->dev);
322         unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
323         int num_ports = sizeof (ioc4_dma_regs_t);
324         void *pad;
325
326         printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
327
328         if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
329                 printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
330                        "already in use\n", __func__, hwif->name,
331                        dma_base, dma_base + num_ports - 1);
332                 return -1;
333         }
334
335         hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
336                          IOC4_DMA_OFFSET;
337
338         hwif->sg_max_nents = IOC4_PRD_ENTRIES;
339
340         hwif->prd_max_nents = IOC4_PRD_ENTRIES;
341         hwif->prd_ent_size = IOC4_PRD_BYTES;
342
343         if (ide_allocate_dma_engine(hwif))
344                 goto dma_pci_alloc_failure;
345
346         pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
347                                    (dma_addr_t *)&hwif->extra_base);
348         if (pad) {
349                 ide_set_hwifdata(hwif, pad);
350                 return 0;
351         }
352
353         ide_release_dma_engine(hwif);
354
355         printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
356                __func__, hwif->name);
357         printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
358
359 dma_pci_alloc_failure:
360         release_mem_region(dma_base, num_ports);
361
362         return -1;
363 }
364
365 /* Initializes the IOC4 DMA Engine */
366 static void
367 sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
368 {
369         u32 ioc4_dma;
370         ide_hwif_t *hwif = drive->hwif;
371         unsigned long dma_base = hwif->dma_base;
372         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
373         u32 dma_addr, ending_dma_addr;
374
375         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
376
377         if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
378                 printk(KERN_WARNING
379                         "%s(%s):Warning!! DMA from previous transfer was still active\n",
380                        __func__, drive->name);
381                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
382                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
383
384                 if (ioc4_dma & IOC4_S_DMA_STOP)
385                         printk(KERN_ERR
386                                "%s(%s) : IOC4 Dma STOP bit is still 1\n",
387                                __func__, drive->name);
388         }
389
390         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
391         if (ioc4_dma & IOC4_S_DMA_ERROR) {
392                 printk(KERN_WARNING
393                        "%s(%s) : Warning!! - DMA Error during Previous"
394                        " transfer | status 0x%x\n",
395                        __func__, drive->name, ioc4_dma);
396                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
397                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
398
399                 if (ioc4_dma & IOC4_S_DMA_STOP)
400                         printk(KERN_ERR
401                                "%s(%s) : IOC4 DMA STOP bit is still 1\n",
402                                __func__, drive->name);
403         }
404
405         /* Address of the Scatter Gather List */
406         dma_addr = cpu_to_le32(hwif->dmatable_dma);
407         writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
408
409         /* Address of the Ending DMA */
410         memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
411         ending_dma_addr = cpu_to_le32(hwif->extra_base);
412         writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
413
414         writel(dma_direction, (void __iomem *)ioc4_dma_addr);
415         drive->waiting_for_dma = 1;
416 }
417
418 /* IOC4 Scatter Gather list Format                                       */
419 /* 128 Bit entries to support 64 bit addresses in the future             */
420 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format      */
421 /* --------------------------------------------------------------------- */
422 /* | Upper 32 bits - Zero           |           Lower 32 bits- address | */
423 /* --------------------------------------------------------------------- */
424 /* | Upper 32 bits - Zero           |EOL| 15 unused     | 16 Bit Length| */
425 /* --------------------------------------------------------------------- */
426 /* Creates the scatter gather list, DMA Table */
427 static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
428 {
429         ide_hwif_t *hwif = drive->hwif;
430         unsigned int *table = hwif->dmatable_cpu;
431         unsigned int count = 0, i = cmd->sg_nents;
432         struct scatterlist *sg = hwif->sg_table;
433
434         while (i && sg_dma_len(sg)) {
435                 dma_addr_t cur_addr;
436                 int cur_len;
437                 cur_addr = sg_dma_address(sg);
438                 cur_len = sg_dma_len(sg);
439
440                 while (cur_len) {
441                         if (count++ >= IOC4_PRD_ENTRIES) {
442                                 printk(KERN_WARNING
443                                        "%s: DMA table too small\n",
444                                        drive->name);
445                                 goto use_pio_instead;
446                         } else {
447                                 u32 bcount =
448                                     0x10000 - (cur_addr & 0xffff);
449
450                                 if (bcount > cur_len)
451                                         bcount = cur_len;
452
453                                 /* put the addr, length in
454                                  * the IOC4 dma-table format */
455                                 *table = 0x0;
456                                 table++;
457                                 *table = cpu_to_be32(cur_addr);
458                                 table++;
459                                 *table = 0x0;
460                                 table++;
461
462                                 *table = cpu_to_be32(bcount);
463                                 table++;
464
465                                 cur_addr += bcount;
466                                 cur_len -= bcount;
467                         }
468                 }
469
470                 sg = sg_next(sg);
471                 i--;
472         }
473
474         if (count) {
475                 table--;
476                 *table |= cpu_to_be32(0x80000000);
477                 return count;
478         }
479
480 use_pio_instead:
481         ide_destroy_dmatable(drive);
482
483         return 0;               /* revert to PIO for this request */
484 }
485
486 static int sgiioc4_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
487 {
488         int ddir;
489         u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
490
491         if (sgiioc4_build_dmatable(drive, cmd) == 0) {
492                 /* try PIO instead of DMA */
493                 ide_map_sg(drive, cmd);
494                 return 1;
495         }
496
497         if (write)
498                 /* Writes TO the IOC4 FROM Main Memory */
499                 ddir = IOC4_DMA_READ;
500         else
501                 /* Writes FROM the IOC4 TO Main Memory */
502                 ddir = IOC4_DMA_WRITE;
503
504         sgiioc4_configure_for_dma(ddir, drive);
505
506         return 0;
507 }
508
509 static const struct ide_tp_ops sgiioc4_tp_ops = {
510         .exec_command           = ide_exec_command,
511         .read_status            = sgiioc4_read_status,
512         .read_altstatus         = ide_read_altstatus,
513
514         .set_irq                = ide_set_irq,
515
516         .tf_load                = ide_tf_load,
517         .tf_read                = ide_tf_read,
518
519         .input_data             = ide_input_data,
520         .output_data            = ide_output_data,
521 };
522
523 static const struct ide_port_ops sgiioc4_port_ops = {
524         .set_dma_mode           = sgiioc4_set_dma_mode,
525         /* reset DMA engine, clear IRQs */
526         .resetproc              = sgiioc4_resetproc,
527 };
528
529 static const struct ide_dma_ops sgiioc4_dma_ops = {
530         .dma_host_set           = sgiioc4_dma_host_set,
531         .dma_setup              = sgiioc4_dma_setup,
532         .dma_start              = sgiioc4_dma_start,
533         .dma_end                = sgiioc4_dma_end,
534         .dma_test_irq           = sgiioc4_dma_test_irq,
535         .dma_lost_irq           = sgiioc4_dma_lost_irq,
536         .dma_timeout            = ide_dma_timeout,
537 };
538
539 static const struct ide_port_info sgiioc4_port_info __devinitconst = {
540         .name                   = DRV_NAME,
541         .chipset                = ide_pci,
542         .init_dma               = ide_dma_sgiioc4,
543         .tp_ops                 = &sgiioc4_tp_ops,
544         .port_ops               = &sgiioc4_port_ops,
545         .dma_ops                = &sgiioc4_dma_ops,
546         .host_flags             = IDE_HFLAG_MMIO,
547         .irq_flags              = IRQF_SHARED,
548         .mwdma_mask             = ATA_MWDMA2_ONLY,
549 };
550
551 static int __devinit
552 sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
553 {
554         unsigned long cmd_base, irqport;
555         unsigned long bar0, cmd_phys_base, ctl;
556         void __iomem *virt_base;
557         hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
558         int rc;
559
560         /*  Get the CmdBlk and CtrlBlk Base Registers */
561         bar0 = pci_resource_start(dev, 0);
562         virt_base = pci_ioremap_bar(dev, 0);
563         if (virt_base == NULL) {
564                 printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
565                                 DRV_NAME, bar0);
566                 return -ENOMEM;
567         }
568         cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
569         ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
570         irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
571
572         cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
573         if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
574                                DRV_NAME) == NULL) {
575                 printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
576                        "already in use\n", DRV_NAME, pci_name(dev),
577                        cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
578                 rc = -EBUSY;
579                 goto req_mem_rgn_err;
580         }
581
582         /* Initialize the IO registers */
583         memset(&hw, 0, sizeof(hw));
584         sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
585         hw.irq = dev->irq;
586         hw.chipset = ide_pci;
587         hw.dev = &dev->dev;
588
589         /* Initializing chipset IRQ Registers */
590         writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
591
592         rc = ide_host_add(&sgiioc4_port_info, hws, NULL);
593         if (!rc)
594                 return 0;
595
596         release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
597 req_mem_rgn_err:
598         iounmap(virt_base);
599         return rc;
600 }
601
602 static unsigned int __devinit
603 pci_init_sgiioc4(struct pci_dev *dev)
604 {
605         int ret;
606
607         printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
608                          DRV_NAME, pci_name(dev), dev->revision);
609
610         if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
611                 printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
612                                 "firmware is obsolete - please upgrade to "
613                                 "revision46 or higher\n",
614                                 DRV_NAME, pci_name(dev));
615                 ret = -EAGAIN;
616                 goto out;
617         }
618         ret = sgiioc4_ide_setup_pci_device(dev);
619 out:
620         return ret;
621 }
622
623 int __devinit
624 ioc4_ide_attach_one(struct ioc4_driver_data *idd)
625 {
626         /* PCI-RT does not bring out IDE connection.
627          * Do not attach to this particular IOC4.
628          */
629         if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
630                 return 0;
631
632         return pci_init_sgiioc4(idd->idd_pdev);
633 }
634
635 static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
636         .is_name = "IOC4_ide",
637         .is_owner = THIS_MODULE,
638         .is_probe = ioc4_ide_attach_one,
639 /*      .is_remove = ioc4_ide_remove_one,       */
640 };
641
642 static int __init ioc4_ide_init(void)
643 {
644         return ioc4_register_submodule(&ioc4_ide_submodule);
645 }
646
647 late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
648
649 MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
650 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
651 MODULE_LICENSE("GPL");