2 * Low-Level PCI Support for SGI Visual Workstation
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
7 #include <linux/kernel.h>
9 #include <linux/init.h>
17 extern struct pci_raw_ops pci_direct_conf1;
19 static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
20 static void pci_visws_disable_irq(struct pci_dev *dev) { }
22 int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
23 void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
25 void __init pcibios_penalize_isa_irq(int irq, int active) {}
28 unsigned int pci_bus0, pci_bus1;
30 static inline u8 bridge_swizzle(u8 pin, u8 slot)
32 return (((pin - 1) + slot) % 4) + 1;
35 static u8 __init visws_swizzle(struct pci_dev *dev, u8 *pinp)
39 while (dev->bus->self) { /* Move up the chain of bridges. */
40 pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
45 return PCI_SLOT(dev->devfn);
48 static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
50 int irq, bus = dev->bus->number;
54 /* Nothing useful at PIIX4 pin 1 */
55 if (bus == pci_bus0 && slot == 4 && pin == 0)
58 /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
59 if (bus == pci_bus0 && slot == 4 && pin == 3) {
60 irq = CO_IRQ(CO_APIC_PIIX4_USB);
64 /* First pin spread down 1 APIC entry per slot */
66 irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
67 CO_APIC_PCIA_BASE0) + slot);
71 /* lines 1,2,3 from any slot is shared in this twirly pattern */
72 if (bus == pci_bus1) {
73 /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
74 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
75 } else { /* bus == pci_bus0 */
76 /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
78 slot = 3; /* same pattern */
79 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
82 printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
86 void __init pcibios_update_irq(struct pci_dev *dev, int irq)
88 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
91 static int __init pcibios_init(void)
93 /* The VISWS supports configuration access type 1 only */
94 pci_probe = (pci_probe | PCI_PROBE_CONF1) &
95 ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
97 pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
98 pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
100 printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
101 "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
103 raw_pci_ops = &pci_direct_conf1;
104 pci_scan_bus(pci_bus0, &pci_root_ops, NULL);
105 pci_scan_bus(pci_bus1, &pci_root_ops, NULL);
106 pci_fixup_irqs(visws_swizzle, visws_map_irq);
107 pcibios_resource_survey();
111 subsys_initcall(pcibios_init);