git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-versatile/core.c

   1 /*
   2  *  linux/arch/arm/mach-versatile/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/config.h>
  22 #include <linux/init.h>
  23 #include <linux/device.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/sysdev.h>
  27 #include <linux/interrupt.h>
  28
  29 #include <asm/system.h>
  30 #include <asm/hardware.h>
  31 #include <asm/io.h>
  32 #include <asm/irq.h>
  33 #include <asm/leds.h>
  34 #include <asm/hardware/amba.h>
  35 #include <asm/hardware/amba_clcd.h>
  36 #include <asm/hardware/arm_timer.h>
  37 #include <asm/hardware/icst307.h>
  38
  39 #include <asm/mach/arch.h>
  40 #include <asm/mach/flash.h>
  41 #include <asm/mach/irq.h>
  42 #include <asm/mach/time.h>
  43 #include <asm/mach/map.h>
  44 #include <asm/mach/mmc.h>
  45
  46 #include "core.h"
  47 #include "clock.h"
  48
  49 /*
  50  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  51  * is the (PA >> 12).
  52  *
  53  * Setup a VA for the Versatile Vectored Interrupt Controller.
  54  */
  55 #define __io_address(n)         __io(IO_ADDRESS(n))
  56 #define VA_VIC_BASE             __io_address(VERSATILE_VIC_BASE)
  57 #define VA_SIC_BASE             __io_address(VERSATILE_SIC_BASE)
  58
  59 static void vic_mask_irq(unsigned int irq)
  60 {
  61         irq -= IRQ_VIC_START;
  62         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
  63 }
  64
  65 static void vic_unmask_irq(unsigned int irq)
  66 {
  67         irq -= IRQ_VIC_START;
  68         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE);
  69 }
  70
  71 static struct irqchip vic_chip = {
  72         .ack    = vic_mask_irq,
  73         .mask   = vic_mask_irq,
  74         .unmask = vic_unmask_irq,
  75 };
  76
  77 static void sic_mask_irq(unsigned int irq)
  78 {
  79         irq -= IRQ_SIC_START;
  80         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
  81 }
  82
  83 static void sic_unmask_irq(unsigned int irq)
  84 {
  85         irq -= IRQ_SIC_START;
  86         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
  87 }
  88
  89 static struct irqchip sic_chip = {
  90         .ack    = sic_mask_irq,
  91         .mask   = sic_mask_irq,
  92         .unmask = sic_unmask_irq,
  93 };
  94
  95 static void
  96 sic_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
  97 {
  98         unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
  99
 100         if (status == 0) {
 101                 do_bad_IRQ(irq, desc, regs);
 102                 return;
 103         }
 104
 105         do {
 106                 irq = ffs(status) - 1;
 107                 status &= ~(1 << irq);
 108
 109                 irq += IRQ_SIC_START;
 110
 111                 desc = irq_desc + irq;
 112                 desc_handle_irq(irq, desc, regs);
 113         } while (status);
 114 }
 115
 116 #if 1
 117 #define IRQ_MMCI0A      IRQ_VICSOURCE22
 118 #define IRQ_AACI        IRQ_VICSOURCE24
 119 #define IRQ_ETH         IRQ_VICSOURCE25
 120 #define PIC_MASK        0xFFD00000
 121 #else
 122 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
 123 #define IRQ_AACI        IRQ_SIC_AACI
 124 #define IRQ_ETH         IRQ_SIC_ETH
 125 #define PIC_MASK        0
 126 #endif
 127
 128 void __init versatile_init_irq(void)
 129 {
 130         unsigned int i, value;
 131
 132         /* Disable all interrupts initially. */
 133
 134         writel(0, VA_VIC_BASE + VIC_INT_SELECT);
 135         writel(0, VA_VIC_BASE + VIC_IRQ_ENABLE);
 136         writel(~0, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
 137         writel(0, VA_VIC_BASE + VIC_IRQ_STATUS);
 138         writel(0, VA_VIC_BASE + VIC_ITCR);
 139         writel(~0, VA_VIC_BASE + VIC_IRQ_SOFT_CLEAR);
 140
 141         /*
 142          * Make sure we clear all existing interrupts
 143          */
 144         writel(0, VA_VIC_BASE + VIC_VECT_ADDR);
 145         for (i = 0; i < 19; i++) {
 146                 value = readl(VA_VIC_BASE + VIC_VECT_ADDR);
 147                 writel(value, VA_VIC_BASE + VIC_VECT_ADDR);
 148         }
 149
 150         for (i = 0; i < 16; i++) {
 151                 value = readl(VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 152                 writel(value | VICVectCntl_Enable | i, VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 153         }
 154
 155         writel(32, VA_VIC_BASE + VIC_DEF_VECT_ADDR);
 156
 157         for (i = IRQ_VIC_START; i <= IRQ_VIC_END; i++) {
 158                 if (i != IRQ_VICSOURCE31) {
 159                         set_irq_chip(i, &vic_chip);
 160                         set_irq_handler(i, do_level_IRQ);
 161                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 162                 }
 163         }
 164
 165         set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
 166         vic_unmask_irq(IRQ_VICSOURCE31);
 167
 168         /* Do second interrupt controller */
 169         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 170
 171         for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
 172                 if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
 173                         set_irq_chip(i, &sic_chip);
 174                         set_irq_handler(i, do_level_IRQ);
 175                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 176                 }
 177         }
 178
 179         /*
 180          * Interrupts on secondary controller from 0 to 8 are routed to
 181          * source 31 on PIC.
 182          * Interrupts from 21 to 31 are routed directly to the VIC on
 183          * the corresponding number on primary controller. This is controlled
 184          * by setting PIC_ENABLEx.
 185          */
 186         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 187 }
 188
 189 static struct map_desc versatile_io_desc[] __initdata = {
 190         {
 191                 .virtual        =  IO_ADDRESS(VERSATILE_SYS_BASE),
 192                 .pfn            = __phys_to_pfn(VERSATILE_SYS_BASE),
 193                 .length         = SZ_4K,
 194                 .type           = MT_DEVICE
 195         }, {
 196                 .virtual        =  IO_ADDRESS(VERSATILE_SIC_BASE),
 197                 .pfn            = __phys_to_pfn(VERSATILE_SIC_BASE),
 198                 .length         = SZ_4K,
 199                 .type           = MT_DEVICE
 200         }, {
 201                 .virtual        =  IO_ADDRESS(VERSATILE_VIC_BASE),
 202                 .pfn            = __phys_to_pfn(VERSATILE_VIC_BASE),
 203                 .length         = SZ_4K,
 204                 .type           = MT_DEVICE
 205         }, {
 206                 .virtual        =  IO_ADDRESS(VERSATILE_SCTL_BASE),
 207                 .pfn            = __phys_to_pfn(VERSATILE_SCTL_BASE),
 208                 .length         = SZ_4K * 9,
 209                 .type           = MT_DEVICE
 210         },
 211 #ifdef CONFIG_MACH_VERSATILE_AB
 212         {
 213                 .virtual        =  IO_ADDRESS(VERSATILE_GPIO0_BASE),
 214                 .pfn            = __phys_to_pfn(VERSATILE_GPIO0_BASE),
 215                 .length         = SZ_4K,
 216                 .type           = MT_DEVICE
 217         }, {
 218                 .virtual        =  IO_ADDRESS(VERSATILE_IB2_BASE),
 219                 .pfn            = __phys_to_pfn(VERSATILE_IB2_BASE),
 220                 .length         = SZ_64M,
 221                 .type           = MT_DEVICE
 222         },
 223 #endif
 224 #ifdef CONFIG_DEBUG_LL
 225         {
 226                 .virtual        =  IO_ADDRESS(VERSATILE_UART0_BASE),
 227                 .pfn            = __phys_to_pfn(VERSATILE_UART0_BASE),
 228                 .length         = SZ_4K,
 229                 .type           = MT_DEVICE
 230         },
 231 #endif
 232 #ifdef CONFIG_PCI
 233         {
 234                 .virtual        =  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
 235                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
 236                 .length         = SZ_4K,
 237                 .type           = MT_DEVICE
 238         }, {
 239                 .virtual        =  VERSATILE_PCI_VIRT_BASE,
 240                 .pfn            = __phys_to_pfn(VERSATILE_PCI_BASE),
 241                 .length         = VERSATILE_PCI_BASE_SIZE,
 242                 .type           = MT_DEVICE
 243         }, {
 244                 .virtual        =  VERSATILE_PCI_CFG_VIRT_BASE,
 245                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 246                 .length         = VERSATILE_PCI_CFG_BASE_SIZE,
 247                 .type           = MT_DEVICE
 248         },
 249 #if 0
 250         {
 251                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE0,
 252                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
 253                 .length         = SZ_16M,
 254                 .type           = MT_DEVICE
 255         }, {
 256                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE1,
 257                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
 258                 .length         = SZ_16M,
 259                 .type           = MT_DEVICE
 260         }, {
 261                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE2,
 262                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
 263                 .length         = SZ_16M,
 264                 .type           = MT_DEVICE
 265         },
 266 #endif
 267 #endif
 268 };
 269
 270 void __init versatile_map_io(void)
 271 {
 272         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 273 }
 274
 275 #define VERSATILE_REFCOUNTER    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
 276
 277 /*
 278  * This is the Versatile sched_clock implementation.  This has
 279  * a resolution of 41.7ns, and a maximum value of about 179s.
 280  */
 281 unsigned long long sched_clock(void)
 282 {
 283         unsigned long long v;
 284
 285         v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125;
 286         do_div(v, 3);
 287
 288         return v;
 289 }
 290
 291
 292 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 293
 294 static int versatile_flash_init(void)
 295 {
 296         u32 val;
 297
 298         val = __raw_readl(VERSATILE_FLASHCTRL);
 299         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 300         __raw_writel(val, VERSATILE_FLASHCTRL);
 301
 302         return 0;
 303 }
 304
 305 static void versatile_flash_exit(void)
 306 {
 307         u32 val;
 308
 309         val = __raw_readl(VERSATILE_FLASHCTRL);
 310         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 311         __raw_writel(val, VERSATILE_FLASHCTRL);
 312 }
 313
 314 static void versatile_flash_set_vpp(int on)
 315 {
 316         u32 val;
 317
 318         val = __raw_readl(VERSATILE_FLASHCTRL);
 319         if (on)
 320                 val |= VERSATILE_FLASHPROG_FLVPPEN;
 321         else
 322                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 323         __raw_writel(val, VERSATILE_FLASHCTRL);
 324 }
 325
 326 static struct flash_platform_data versatile_flash_data = {
 327         .map_name               = "cfi_probe",
 328         .width                  = 4,
 329         .init                   = versatile_flash_init,
 330         .exit                   = versatile_flash_exit,
 331         .set_vpp                = versatile_flash_set_vpp,
 332 };
 333
 334 static struct resource versatile_flash_resource = {
 335         .start                  = VERSATILE_FLASH_BASE,
 336         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE,
 337         .flags                  = IORESOURCE_MEM,
 338 };
 339
 340 static struct platform_device versatile_flash_device = {
 341         .name                   = "armflash",
 342         .id                     = 0,
 343         .dev                    = {
 344                 .platform_data  = &versatile_flash_data,
 345         },
 346         .num_resources          = 1,
 347         .resource               = &versatile_flash_resource,
 348 };
 349
 350 static struct resource smc91x_resources[] = {
 351         [0] = {
 352                 .start          = VERSATILE_ETH_BASE,
 353                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
 354                 .flags          = IORESOURCE_MEM,
 355         },
 356         [1] = {
 357                 .start          = IRQ_ETH,
 358                 .end            = IRQ_ETH,
 359                 .flags          = IORESOURCE_IRQ,
 360         },
 361 };
 362
 363 static struct platform_device smc91x_device = {
 364         .name           = "smc91x",
 365         .id             = 0,
 366         .num_resources  = ARRAY_SIZE(smc91x_resources),
 367         .resource       = smc91x_resources,
 368 };
 369
 370 #define VERSATILE_SYSMCI        (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 371
 372 unsigned int mmc_status(struct device *dev)
 373 {
 374         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 375         u32 mask;
 376
 377         if (adev->res.start == VERSATILE_MMCI0_BASE)
 378                 mask = 1;
 379         else
 380                 mask = 2;
 381
 382         return readl(VERSATILE_SYSMCI) & mask;
 383 }
 384
 385 static struct mmc_platform_data mmc0_plat_data = {
 386         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 387         .status         = mmc_status,
 388 };
 389
 390 /*
 391  * Clock handling
 392  */
 393 static const struct icst307_params versatile_oscvco_params = {
 394         .ref            = 24000,
 395         .vco_max        = 200000,
 396         .vd_min         = 4 + 8,
 397         .vd_max         = 511 + 8,
 398         .rd_min         = 1 + 2,
 399         .rd_max         = 127 + 2,
 400 };
 401
 402 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 403 {
 404         void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 405 #if defined(CONFIG_ARCH_VERSATILE_PB)
 406         void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
 407 #elif defined(CONFIG_MACH_VERSATILE_AB)
 408         void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
 409 #endif
 410         u32 val;
 411
 412         val = readl(sys_osc) & ~0x7ffff;
 413         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 414
 415         writel(0xa05f, sys_lock);
 416         writel(val, sys_osc);
 417         writel(0, sys_lock);
 418 }
 419
 420 static struct clk versatile_clcd_clk = {
 421         .name   = "CLCDCLK",
 422         .params = &versatile_oscvco_params,
 423         .setvco = versatile_oscvco_set,
 424 };
 425
 426 /*
 427  * CLCD support.
 428  */
 429 #define SYS_CLCD_MODE_MASK      (3 << 0)
 430 #define SYS_CLCD_MODE_888       (0 << 0)
 431 #define SYS_CLCD_MODE_5551      (1 << 0)
 432 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
 433 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
 434 #define SYS_CLCD_NLCDIOON       (1 << 2)
 435 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 436 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 437 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 438 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 439 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 440 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 441 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 442 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 443
 444 static struct clcd_panel vga = {
 445         .mode           = {
 446                 .name           = "VGA",
 447                 .refresh        = 60,
 448                 .xres           = 640,
 449                 .yres           = 480,
 450                 .pixclock       = 39721,
 451                 .left_margin    = 40,
 452                 .right_margin   = 24,
 453                 .upper_margin   = 32,
 454                 .lower_margin   = 11,
 455                 .hsync_len      = 96,
 456                 .vsync_len      = 2,
 457                 .sync           = 0,
 458                 .vmode          = FB_VMODE_NONINTERLACED,
 459         },
 460         .width          = -1,
 461         .height         = -1,
 462         .tim2           = TIM2_BCD | TIM2_IPC,
 463         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 464         .bpp            = 16,
 465 };
 466
 467 static struct clcd_panel sanyo_3_8_in = {
 468         .mode           = {
 469                 .name           = "Sanyo QVGA",
 470                 .refresh        = 116,
 471                 .xres           = 320,
 472                 .yres           = 240,
 473                 .pixclock       = 100000,
 474                 .left_margin    = 6,
 475                 .right_margin   = 6,
 476                 .upper_margin   = 5,
 477                 .lower_margin   = 5,
 478                 .hsync_len      = 6,
 479                 .vsync_len      = 6,
 480                 .sync           = 0,
 481                 .vmode          = FB_VMODE_NONINTERLACED,
 482         },
 483         .width          = -1,
 484         .height         = -1,
 485         .tim2           = TIM2_BCD,
 486         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 487         .bpp            = 16,
 488 };
 489
 490 static struct clcd_panel sanyo_2_5_in = {
 491         .mode           = {
 492                 .name           = "Sanyo QVGA Portrait",
 493                 .refresh        = 116,
 494                 .xres           = 240,
 495                 .yres           = 320,
 496                 .pixclock       = 100000,
 497                 .left_margin    = 20,
 498                 .right_margin   = 10,
 499                 .upper_margin   = 2,
 500                 .lower_margin   = 2,
 501                 .hsync_len      = 10,
 502                 .vsync_len      = 2,
 503                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 504                 .vmode          = FB_VMODE_NONINTERLACED,
 505         },
 506         .width          = -1,
 507         .height         = -1,
 508         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 509         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 510         .bpp            = 16,
 511 };
 512
 513 static struct clcd_panel epson_2_2_in = {
 514         .mode           = {
 515                 .name           = "Epson QCIF",
 516                 .refresh        = 390,
 517                 .xres           = 176,
 518                 .yres           = 220,
 519                 .pixclock       = 62500,
 520                 .left_margin    = 3,
 521                 .right_margin   = 2,
 522                 .upper_margin   = 1,
 523                 .lower_margin   = 0,
 524                 .hsync_len      = 3,
 525                 .vsync_len      = 2,
 526                 .sync           = 0,
 527                 .vmode          = FB_VMODE_NONINTERLACED,
 528         },
 529         .width          = -1,
 530         .height         = -1,
 531         .tim2           = TIM2_BCD | TIM2_IPC,
 532         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 533         .bpp            = 16,
 534 };
 535
 536 /*
 537  * Detect which LCD panel is connected, and return the appropriate
 538  * clcd_panel structure.  Note: we do not have any information on
 539  * the required timings for the 8.4in panel, so we presently assume
 540  * VGA timings.
 541  */
 542 static struct clcd_panel *versatile_clcd_panel(void)
 543 {
 544         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 545         struct clcd_panel *panel = &vga;
 546         u32 val;
 547
 548         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 549         if (val == SYS_CLCD_ID_SANYO_3_8)
 550                 panel = &sanyo_3_8_in;
 551         else if (val == SYS_CLCD_ID_SANYO_2_5)
 552                 panel = &sanyo_2_5_in;
 553         else if (val == SYS_CLCD_ID_EPSON_2_2)
 554                 panel = &epson_2_2_in;
 555         else if (val == SYS_CLCD_ID_VGA)
 556                 panel = &vga;
 557         else {
 558                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 559                         val);
 560                 panel = &vga;
 561         }
 562
 563         return panel;
 564 }
 565
 566 /*
 567  * Disable all display connectors on the interface module.
 568  */
 569 static void versatile_clcd_disable(struct clcd_fb *fb)
 570 {
 571         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 572         u32 val;
 573
 574         val = readl(sys_clcd);
 575         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 576         writel(val, sys_clcd);
 577
 578 #ifdef CONFIG_MACH_VERSATILE_AB
 579         /*
 580          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 581          */
 582         if (fb->panel == &sanyo_2_5_in) {
 583                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 584                 unsigned long ctrl;
 585
 586                 ctrl = readl(versatile_ib2_ctrl);
 587                 ctrl &= ~0x01;
 588                 writel(ctrl, versatile_ib2_ctrl);
 589         }
 590 #endif
 591 }
 592
 593 /*
 594  * Enable the relevant connector on the interface module.
 595  */
 596 static void versatile_clcd_enable(struct clcd_fb *fb)
 597 {
 598         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 599         u32 val;
 600
 601         val = readl(sys_clcd);
 602         val &= ~SYS_CLCD_MODE_MASK;
 603
 604         switch (fb->fb.var.green.length) {
 605         case 5:
 606                 val |= SYS_CLCD_MODE_5551;
 607                 break;
 608         case 6:
 609                 val |= SYS_CLCD_MODE_565_RLSB;
 610                 break;
 611         case 8:
 612                 val |= SYS_CLCD_MODE_888;
 613                 break;
 614         }
 615
 616         /*
 617          * Set the MUX
 618          */
 619         writel(val, sys_clcd);
 620
 621         /*
 622          * And now enable the PSUs
 623          */
 624         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 625         writel(val, sys_clcd);
 626
 627 #ifdef CONFIG_MACH_VERSATILE_AB
 628         /*
 629          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 630          */
 631         if (fb->panel == &sanyo_2_5_in) {
 632                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 633                 unsigned long ctrl;
 634
 635                 ctrl = readl(versatile_ib2_ctrl);
 636                 ctrl |= 0x01;
 637                 writel(ctrl, versatile_ib2_ctrl);
 638         }
 639 #endif
 640 }
 641
 642 static unsigned long framesize = SZ_1M;
 643
 644 static int versatile_clcd_setup(struct clcd_fb *fb)
 645 {
 646         dma_addr_t dma;
 647
 648         fb->panel               = versatile_clcd_panel();
 649
 650         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 651                                                     &dma, GFP_KERNEL);
 652         if (!fb->fb.screen_base) {
 653                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 654                 return -ENOMEM;
 655         }
 656
 657         fb->fb.fix.smem_start   = dma;
 658         fb->fb.fix.smem_len     = framesize;
 659
 660         return 0;
 661 }
 662
 663 static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 664 {
 665         return dma_mmap_writecombine(&fb->dev->dev, vma,
 666                                      fb->fb.screen_base,
 667                                      fb->fb.fix.smem_start,
 668                                      fb->fb.fix.smem_len);
 669 }
 670
 671 static void versatile_clcd_remove(struct clcd_fb *fb)
 672 {
 673         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 674                               fb->fb.screen_base, fb->fb.fix.smem_start);
 675 }
 676
 677 static struct clcd_board clcd_plat_data = {
 678         .name           = "Versatile",
 679         .check          = clcdfb_check,
 680         .decode         = clcdfb_decode,
 681         .disable        = versatile_clcd_disable,
 682         .enable         = versatile_clcd_enable,
 683         .setup          = versatile_clcd_setup,
 684         .mmap           = versatile_clcd_mmap,
 685         .remove         = versatile_clcd_remove,
 686 };
 687
 688 #define AACI_IRQ        { IRQ_AACI, NO_IRQ }
 689 #define AACI_DMA        { 0x80, 0x81 }
 690 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
 691 #define MMCI0_DMA       { 0x84, 0 }
 692 #define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
 693 #define KMI0_DMA        { 0, 0 }
 694 #define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
 695 #define KMI1_DMA        { 0, 0 }
 696
 697 /*
 698  * These devices are connected directly to the multi-layer AHB switch
 699  */
 700 #define SMC_IRQ         { NO_IRQ, NO_IRQ }
 701 #define SMC_DMA         { 0, 0 }
 702 #define MPMC_IRQ        { NO_IRQ, NO_IRQ }
 703 #define MPMC_DMA        { 0, 0 }
 704 #define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
 705 #define CLCD_DMA        { 0, 0 }
 706 #define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
 707 #define DMAC_DMA        { 0, 0 }
 708
 709 /*
 710  * These devices are connected via the core APB bridge
 711  */
 712 #define SCTL_IRQ        { NO_IRQ, NO_IRQ }
 713 #define SCTL_DMA        { 0, 0 }
 714 #define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
 715 #define WATCHDOG_DMA    { 0, 0 }
 716 #define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
 717 #define GPIO0_DMA       { 0, 0 }
 718 #define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
 719 #define GPIO1_DMA       { 0, 0 }
 720 #define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
 721 #define RTC_DMA         { 0, 0 }
 722
 723 /*
 724  * These devices are connected via the DMA APB bridge
 725  */
 726 #define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
 727 #define SCI_DMA         { 7, 6 }
 728 #define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
 729 #define UART0_DMA       { 15, 14 }
 730 #define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
 731 #define UART1_DMA       { 13, 12 }
 732 #define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
 733 #define UART2_DMA       { 11, 10 }
 734 #define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
 735 #define SSP_DMA         { 9, 8 }
 736
 737 /* FPGA Primecells */
 738 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 739 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
 740 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 741 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 742
 743 /* DevChip Primecells */
 744 AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
 745 AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
 746 AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 747 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 748 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 749 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
 750 AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
 751 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
 752 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 753 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 754 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 755 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 756 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
 757 AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
 758
 759 static struct amba_device *amba_devs[] __initdata = {
 760         &dmac_device,
 761         &uart0_device,
 762         &uart1_device,
 763         &uart2_device,
 764         &smc_device,
 765         &mpmc_device,
 766         &clcd_device,
 767         &sctl_device,
 768         &wdog_device,
 769         &gpio0_device,
 770         &gpio1_device,
 771         &rtc_device,
 772         &sci0_device,
 773         &ssp0_device,
 774         &aaci_device,
 775         &mmc0_device,
 776         &kmi0_device,
 777         &kmi1_device,
 778 };
 779
 780 #ifdef CONFIG_LEDS
 781 #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
 782
 783 static void versatile_leds_event(led_event_t ledevt)
 784 {
 785         unsigned long flags;
 786         u32 val;
 787
 788         local_irq_save(flags);
 789         val = readl(VA_LEDS_BASE);
 790
 791         switch (ledevt) {
 792         case led_idle_start:
 793                 val = val & ~VERSATILE_SYS_LED0;
 794                 break;
 795
 796         case led_idle_end:
 797                 val = val | VERSATILE_SYS_LED0;
 798                 break;
 799
 800         case led_timer:
 801                 val = val ^ VERSATILE_SYS_LED1;
 802                 break;
 803
 804         case led_halted:
 805                 val = 0;
 806                 break;
 807
 808         default:
 809                 break;
 810         }
 811
 812         writel(val, VA_LEDS_BASE);
 813         local_irq_restore(flags);
 814 }
 815 #endif  /* CONFIG_LEDS */
 816
 817 void __init versatile_init(void)
 818 {
 819         int i;
 820
 821         clk_register(&versatile_clcd_clk);
 822
 823         platform_device_register(&versatile_flash_device);
 824         platform_device_register(&smc91x_device);
 825
 826         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 827                 struct amba_device *d = amba_devs[i];
 828                 amba_device_register(d, &iomem_resource);
 829         }
 830
 831 #ifdef CONFIG_LEDS
 832         leds_event = versatile_leds_event;
 833 #endif
 834 }
 835
 836 /*
 837  * Where is the timer (VA)?
 838  */
 839 #define TIMER0_VA_BASE           __io_address(VERSATILE_TIMER0_1_BASE)
 840 #define TIMER1_VA_BASE          (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 841 #define TIMER2_VA_BASE           __io_address(VERSATILE_TIMER2_3_BASE)
 842 #define TIMER3_VA_BASE          (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
 843 #define VA_IC_BASE               __io_address(VERSATILE_VIC_BASE)
 844
 845 /*
 846  * How long is the timer interval?
 847  */
 848 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 849 #if TIMER_INTERVAL >= 0x100000
 850 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
 851 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 852 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 853 #elif TIMER_INTERVAL >= 0x10000
 854 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
 855 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 856 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 857 #else
 858 #define TIMER_RELOAD    (TIMER_INTERVAL)
 859 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 860 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 861 #endif
 862
 863 /*
 864  * Returns number of ms since last clock interrupt.  Note that interrupts
 865  * will have been disabled by do_gettimeoffset()
 866  */
 867 static unsigned long versatile_gettimeoffset(void)
 868 {
 869         unsigned long ticks1, ticks2, status;
 870
 871         /*
 872          * Get the current number of ticks.  Note that there is a race
 873          * condition between us reading the timer and checking for
 874          * an interrupt.  We get around this by ensuring that the
 875          * counter has not reloaded between our two reads.
 876          */
 877         ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 878         do {
 879                 ticks1 = ticks2;
 880                 status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
 881                 ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 882         } while (ticks2 > ticks1);
 883
 884         /*
 885          * Number of ticks since last interrupt.
 886          */
 887         ticks1 = TIMER_RELOAD - ticks2;
 888
 889         /*
 890          * Interrupt pending?  If so, we've reloaded once already.
 891          *
 892          * FIXME: Need to check this is effectively timer 0 that expires
 893          */
 894         if (status & IRQMASK_TIMERINT0_1)
 895                 ticks1 += TIMER_RELOAD;
 896
 897         /*
 898          * Convert the ticks to usecs
 899          */
 900         return TICKS2USECS(ticks1);
 901 }
 902
 903 /*
 904  * IRQ handler for the timer
 905  */
 906 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 907 {
 908         write_seqlock(&xtime_lock);
 909
 910         // ...clear the interrupt
 911         writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 912
 913         timer_tick(regs);
 914
 915         write_sequnlock(&xtime_lock);
 916
 917         return IRQ_HANDLED;
 918 }
 919
 920 static struct irqaction versatile_timer_irq = {
 921         .name           = "Versatile Timer Tick",
 922         .flags          = SA_INTERRUPT | SA_TIMER,
 923         .handler        = versatile_timer_interrupt,
 924 };
 925
 926 /*
 927  * Set up timer interrupt, and return the current time in seconds.
 928  */
 929 static void __init versatile_timer_init(void)
 930 {
 931         u32 val;
 932
 933         /*
 934          * set clock frequency:
 935          *      VERSATILE_REFCLK is 32KHz
 936          *      VERSATILE_TIMCLK is 1MHz
 937          */
 938         val = readl(__io_address(VERSATILE_SCTL_BASE));
 939         writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
 940                (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
 941                (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
 942                (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
 943                __io_address(VERSATILE_SCTL_BASE));
 944
 945         /*
 946          * Initialise to a known state (all timers off)
 947          */
 948         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 949         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 950         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 951         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 952
 953         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
 954         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
 955         writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
 956                TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
 957
 958         /*
 959          * Make irqs happen for the system timer
 960          */
 961         setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
 962 }
 963
 964 struct sys_timer versatile_timer = {
 965         .init           = versatile_timer_init,
 966         .offset         = versatile_gettimeoffset,
 967 };