Merge branch 'master'
[linux-2.6] / drivers / usb / host / ohci-hcd.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
6  * 
7  * [ Initialisation is based on Linus'  ]
8  * [ uhci code and gregs ohci fragments ]
9  * [ (C) Copyright 1999 Linus Torvalds  ]
10  * [ (C) Copyright 1999 Gregory P. Smith]
11  * 
12  * 
13  * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
14  * interfaces (though some non-x86 Intel chips use it).  It supports
15  * smarter hardware than UHCI.  A download link for the spec available
16  * through the http://www.usb.org website.
17  *
18  * History:
19  * 
20  * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
21  * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
22  * 2003/02/24 show registers in sysfs (Kevin Brosius)
23  *
24  * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
25  *      bandwidth accounting; if debugging, show schedules in driverfs
26  * 2002/07/19 fixes to management of ED and schedule state.
27  * 2002/06/09 SA-1111 support (Christopher Hoover)
28  * 2002/06/01 remember frame when HC won't see EDs any more; use that info
29  *      to fix urb unlink races caused by interrupt latency assumptions;
30  *      minor ED field and function naming updates
31  * 2002/01/18 package as a patch for 2.5.3; this should match the
32  *      2.4.17 kernel modulo some bugs being fixed.
33  *
34  * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
35  *      from post-2.4.5 patches.
36  * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
37  * 2001/09/07 match PCI PM changes, errnos from Linus' tree
38  * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
39  *      pbook pci quirks gone (please fix pbook pci sw!) (db)
40  *
41  * 2001/04/08 Identify version on module load (gb)
42  * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
43         pci_map_single (db)
44  * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
45  * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
46  *
47  * 2000/09/26 fixed races in removing the private portion of the urb
48  * 2000/09/07 disable bulk and control lists when unlinking the last
49  *      endpoint descriptor in order to avoid unrecoverable errors on
50  *      the Lucent chips. (rwc@sgi)
51  * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
52  *      urb unlink probs, indentation fixes
53  * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
54  *      device unplugs.
55  * 2000/06/28 use PCI hotplug framework, for better power management
56  *      and for Cardbus support (David Brownell)
57  * 2000/earlier:  fixes for NEC/Lucent chips; suspend/resume handling
58  *      when the controller loses power; handle UE; cleanup; ...
59  *
60  * v5.2 1999/12/07 URB 3rd preview, 
61  * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
62  * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume 
63  *      i386: HUB, Keyboard, Mouse, Printer 
64  *
65  * v4.3 1999/10/27 multiple HCs, bulk_request
66  * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
67  * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
68  * v4.0 1999/08/18 
69  * v3.0 1999/06/25 
70  * v2.1 1999/05/09  code clean up
71  * v2.0 1999/05/04 
72  * v1.0 1999/04/27 initial release
73  *
74  * This file is licenced under the GPL.
75  */
76  
77 #include <linux/config.h>
78
79 #ifdef CONFIG_USB_DEBUG
80 #       define DEBUG
81 #else
82 #       undef DEBUG
83 #endif
84
85 #include <linux/module.h>
86 #include <linux/moduleparam.h>
87 #include <linux/pci.h>
88 #include <linux/kernel.h>
89 #include <linux/delay.h>
90 #include <linux/ioport.h>
91 #include <linux/sched.h>
92 #include <linux/slab.h>
93 #include <linux/smp_lock.h>
94 #include <linux/errno.h>
95 #include <linux/init.h>
96 #include <linux/timer.h>
97 #include <linux/list.h>
98 #include <linux/usb.h>
99 #include <linux/usb_otg.h>
100 #include <linux/dma-mapping.h> 
101 #include <linux/dmapool.h>
102 #include <linux/reboot.h>
103
104 #include <asm/io.h>
105 #include <asm/irq.h>
106 #include <asm/system.h>
107 #include <asm/unaligned.h>
108 #include <asm/byteorder.h>
109
110 #include "../core/hcd.h"
111
112 #define DRIVER_VERSION "2005 April 22"
113 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
114 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
115
116 /*-------------------------------------------------------------------------*/
117
118 // #define OHCI_VERBOSE_DEBUG   /* not always helpful */
119
120 /* For initializing controller (mask in an HCFS mode too) */
121 #define OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
122 #define OHCI_INTR_INIT \
123         (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH)
124
125 #ifdef __hppa__
126 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
127 #define IR_DISABLE
128 #endif
129
130 #ifdef CONFIG_ARCH_OMAP
131 /* OMAP doesn't support IR (no SMM; not needed) */
132 #define IR_DISABLE
133 #endif
134
135 /*-------------------------------------------------------------------------*/
136
137 static const char       hcd_name [] = "ohci_hcd";
138
139 #include "ohci.h"
140
141 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
142 static int ohci_init (struct ohci_hcd *ohci);
143 static void ohci_stop (struct usb_hcd *hcd);
144 static int ohci_reboot (struct notifier_block *, unsigned long , void *);
145
146 #include "ohci-hub.c"
147 #include "ohci-dbg.c"
148 #include "ohci-mem.c"
149 #include "ohci-q.c"
150
151
152 /*
153  * On architectures with edge-triggered interrupts we must never return
154  * IRQ_NONE.
155  */
156 #if defined(CONFIG_SA1111)  /* ... or other edge-triggered systems */
157 #define IRQ_NOTMINE     IRQ_HANDLED
158 #else
159 #define IRQ_NOTMINE     IRQ_NONE
160 #endif
161
162
163 /* Some boards misreport power switching/overcurrent */
164 static int distrust_firmware = 1;
165 module_param (distrust_firmware, bool, 0);
166 MODULE_PARM_DESC (distrust_firmware,
167         "true to distrust firmware power/overcurrent setup");
168
169 /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
170 static int no_handshake = 0;
171 module_param (no_handshake, bool, 0);
172 MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
173
174 /*-------------------------------------------------------------------------*/
175
176 /*
177  * queue up an urb for anything except the root hub
178  */
179 static int ohci_urb_enqueue (
180         struct usb_hcd  *hcd,
181         struct usb_host_endpoint *ep,
182         struct urb      *urb,
183         gfp_t           mem_flags
184 ) {
185         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
186         struct ed       *ed;
187         urb_priv_t      *urb_priv;
188         unsigned int    pipe = urb->pipe;
189         int             i, size = 0;
190         unsigned long   flags;
191         int             retval = 0;
192         
193 #ifdef OHCI_VERBOSE_DEBUG
194         urb_print (urb, "SUB", usb_pipein (pipe));
195 #endif
196         
197         /* every endpoint has a ed, locate and maybe (re)initialize it */
198         if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
199                 return -ENOMEM;
200
201         /* for the private part of the URB we need the number of TDs (size) */
202         switch (ed->type) {
203                 case PIPE_CONTROL:
204                         /* td_submit_urb() doesn't yet handle these */
205                         if (urb->transfer_buffer_length > 4096)
206                                 return -EMSGSIZE;
207
208                         /* 1 TD for setup, 1 for ACK, plus ... */
209                         size = 2;
210                         /* FALLTHROUGH */
211                 // case PIPE_INTERRUPT:
212                 // case PIPE_BULK:
213                 default:
214                         /* one TD for every 4096 Bytes (can be upto 8K) */
215                         size += urb->transfer_buffer_length / 4096;
216                         /* ... and for any remaining bytes ... */
217                         if ((urb->transfer_buffer_length % 4096) != 0)
218                                 size++;
219                         /* ... and maybe a zero length packet to wrap it up */
220                         if (size == 0)
221                                 size++;
222                         else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
223                                 && (urb->transfer_buffer_length
224                                         % usb_maxpacket (urb->dev, pipe,
225                                                 usb_pipeout (pipe))) == 0)
226                                 size++;
227                         break;
228                 case PIPE_ISOCHRONOUS: /* number of packets from URB */
229                         size = urb->number_of_packets;
230                         break;
231         }
232
233         /* allocate the private part of the URB */
234         urb_priv = kmalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
235                         mem_flags);
236         if (!urb_priv)
237                 return -ENOMEM;
238         memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
239         INIT_LIST_HEAD (&urb_priv->pending);
240         urb_priv->length = size;
241         urb_priv->ed = ed;      
242
243         /* allocate the TDs (deferring hash chain updates) */
244         for (i = 0; i < size; i++) {
245                 urb_priv->td [i] = td_alloc (ohci, mem_flags);
246                 if (!urb_priv->td [i]) {
247                         urb_priv->length = i;
248                         urb_free_priv (ohci, urb_priv);
249                         return -ENOMEM;
250                 }
251         }       
252
253         spin_lock_irqsave (&ohci->lock, flags);
254
255         /* don't submit to a dead HC */
256         if (!HC_IS_RUNNING(hcd->state)) {
257                 retval = -ENODEV;
258                 goto fail;
259         }
260
261         /* in case of unlink-during-submit */
262         spin_lock (&urb->lock);
263         if (urb->status != -EINPROGRESS) {
264                 spin_unlock (&urb->lock);
265                 urb->hcpriv = urb_priv;
266                 finish_urb (ohci, urb, NULL);
267                 retval = 0;
268                 goto fail;
269         }
270
271         /* schedule the ed if needed */
272         if (ed->state == ED_IDLE) {
273                 retval = ed_schedule (ohci, ed);
274                 if (retval < 0)
275                         goto fail0;
276                 if (ed->type == PIPE_ISOCHRONOUS) {
277                         u16     frame = ohci_frame_no(ohci);
278
279                         /* delay a few frames before the first TD */
280                         frame += max_t (u16, 8, ed->interval);
281                         frame &= ~(ed->interval - 1);
282                         frame |= ed->branch;
283                         urb->start_frame = frame;
284
285                         /* yes, only URB_ISO_ASAP is supported, and
286                          * urb->start_frame is never used as input.
287                          */
288                 }
289         } else if (ed->type == PIPE_ISOCHRONOUS)
290                 urb->start_frame = ed->last_iso + ed->interval;
291
292         /* fill the TDs and link them to the ed; and
293          * enable that part of the schedule, if needed
294          * and update count of queued periodic urbs
295          */
296         urb->hcpriv = urb_priv;
297         td_submit_urb (ohci, urb);
298
299 fail0:
300         spin_unlock (&urb->lock);
301 fail:
302         if (retval)
303                 urb_free_priv (ohci, urb_priv);
304         spin_unlock_irqrestore (&ohci->lock, flags);
305         return retval;
306 }
307
308 /*
309  * decouple the URB from the HC queues (TDs, urb_priv); it's
310  * already marked using urb->status.  reporting is always done
311  * asynchronously, and we might be dealing with an urb that's
312  * partially transferred, or an ED with other urbs being unlinked.
313  */
314 static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
315 {
316         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
317         unsigned long           flags;
318         
319 #ifdef OHCI_VERBOSE_DEBUG
320         urb_print (urb, "UNLINK", 1);
321 #endif            
322
323         spin_lock_irqsave (&ohci->lock, flags);
324         if (HC_IS_RUNNING(hcd->state)) {
325                 urb_priv_t  *urb_priv;
326
327                 /* Unless an IRQ completed the unlink while it was being
328                  * handed to us, flag it for unlink and giveback, and force
329                  * some upcoming INTR_SF to call finish_unlinks()
330                  */
331                 urb_priv = urb->hcpriv;
332                 if (urb_priv) {
333                         if (urb_priv->ed->state == ED_OPER)
334                                 start_ed_unlink (ohci, urb_priv->ed);
335                 }
336         } else {
337                 /*
338                  * with HC dead, we won't respect hc queue pointers
339                  * any more ... just clean up every urb's memory.
340                  */
341                 if (urb->hcpriv)
342                         finish_urb (ohci, urb, NULL);
343         }
344         spin_unlock_irqrestore (&ohci->lock, flags);
345         return 0;
346 }
347
348 /*-------------------------------------------------------------------------*/
349
350 /* frees config/altsetting state for endpoints,
351  * including ED memory, dummy TD, and bulk/intr data toggle
352  */
353
354 static void
355 ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
356 {
357         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
358         unsigned long           flags;
359         struct ed               *ed = ep->hcpriv;
360         unsigned                limit = 1000;
361
362         /* ASSERT:  any requests/urbs are being unlinked */
363         /* ASSERT:  nobody can be submitting urbs for this any more */
364
365         if (!ed)
366                 return;
367
368 rescan:
369         spin_lock_irqsave (&ohci->lock, flags);
370
371         if (!HC_IS_RUNNING (hcd->state)) {
372 sanitize:
373                 ed->state = ED_IDLE;
374                 finish_unlinks (ohci, 0, NULL);
375         }
376
377         switch (ed->state) {
378         case ED_UNLINK:         /* wait for hw to finish? */
379                 /* major IRQ delivery trouble loses INTR_SF too... */
380                 if (limit-- == 0) {
381                         ohci_warn (ohci, "IRQ INTR_SF lossage\n");
382                         goto sanitize;
383                 }
384                 spin_unlock_irqrestore (&ohci->lock, flags);
385                 schedule_timeout_uninterruptible(1);
386                 goto rescan;
387         case ED_IDLE:           /* fully unlinked */
388                 if (list_empty (&ed->td_list)) {
389                         td_free (ohci, ed->dummy);
390                         ed_free (ohci, ed);
391                         break;
392                 }
393                 /* else FALL THROUGH */
394         default:
395                 /* caller was supposed to have unlinked any requests;
396                  * that's not our job.  can't recover; must leak ed.
397                  */
398                 ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
399                         ed, ep->desc.bEndpointAddress, ed->state,
400                         list_empty (&ed->td_list) ? "" : " (has tds)");
401                 td_free (ohci, ed->dummy);
402                 break;
403         }
404         ep->hcpriv = NULL;
405         spin_unlock_irqrestore (&ohci->lock, flags);
406         return;
407 }
408
409 static int ohci_get_frame (struct usb_hcd *hcd)
410 {
411         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
412
413         return ohci_frame_no(ohci);
414 }
415
416 static void ohci_usb_reset (struct ohci_hcd *ohci)
417 {
418         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
419         ohci->hc_control &= OHCI_CTRL_RWC;
420         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
421 }
422
423 /* reboot notifier forcibly disables IRQs and DMA, helping kexec and
424  * other cases where the next software may expect clean state from the
425  * "firmware".  this is bus-neutral, unlike shutdown() methods.
426  */
427 static int
428 ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
429 {
430         struct ohci_hcd *ohci;
431
432         ohci = container_of (block, struct ohci_hcd, reboot_notifier);
433         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
434         ohci_usb_reset (ohci);
435         /* flush the writes */
436         (void) ohci_readl (ohci, &ohci->regs->control);
437         return 0;
438 }
439
440 /*-------------------------------------------------------------------------*
441  * HC functions
442  *-------------------------------------------------------------------------*/
443
444 /* init memory, and kick BIOS/SMM off */
445
446 static int ohci_init (struct ohci_hcd *ohci)
447 {
448         int ret;
449
450         disable (ohci);
451         ohci->regs = ohci_to_hcd(ohci)->regs;
452         ohci->next_statechange = jiffies;
453
454 #ifndef IR_DISABLE
455         /* SMM owns the HC?  not for long! */
456         if (!no_handshake && ohci_readl (ohci,
457                                         &ohci->regs->control) & OHCI_CTRL_IR) {
458                 u32 temp;
459
460                 ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
461
462                 /* this timeout is arbitrary.  we make it long, so systems
463                  * depending on usb keyboards may be usable even if the
464                  * BIOS/SMM code seems pretty broken.
465                  */
466                 temp = 500;     /* arbitrary: five seconds */
467
468                 ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
469                 ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
470                 while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
471                         msleep (10);
472                         if (--temp == 0) {
473                                 ohci_err (ohci, "USB HC takeover failed!"
474                                         "  (BIOS/SMM bug)\n");
475                                 return -EBUSY;
476                         }
477                 }
478                 ohci_usb_reset (ohci);
479         }
480 #endif
481
482         /* Disable HC interrupts */
483         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
484         // flush the writes
485         (void) ohci_readl (ohci, &ohci->regs->control);
486
487         /* Read the number of ports unless overridden */
488         if (ohci->num_ports == 0)
489                 ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
490
491         if (ohci->hcca)
492                 return 0;
493
494         ohci->hcca = dma_alloc_coherent (ohci_to_hcd(ohci)->self.controller,
495                         sizeof *ohci->hcca, &ohci->hcca_dma, 0);
496         if (!ohci->hcca)
497                 return -ENOMEM;
498
499         if ((ret = ohci_mem_init (ohci)) < 0)
500                 ohci_stop (ohci_to_hcd(ohci));
501
502         return ret;
503
504 }
505
506 /*-------------------------------------------------------------------------*/
507
508 /* Start an OHCI controller, set the BUS operational
509  * resets USB and controller
510  * enable interrupts 
511  */
512 static int ohci_run (struct ohci_hcd *ohci)
513 {
514         u32                     mask, temp;
515         int                     first = ohci->fminterval == 0;
516
517         disable (ohci);
518
519         /* boot firmware should have set this up (5.1.1.3.1) */
520         if (first) {
521
522                 temp = ohci_readl (ohci, &ohci->regs->fminterval);
523                 ohci->fminterval = temp & 0x3fff;
524                 if (ohci->fminterval != FI)
525                         ohci_dbg (ohci, "fminterval delta %d\n",
526                                 ohci->fminterval - FI);
527                 ohci->fminterval |= FSMP (ohci->fminterval) << 16;
528                 /* also: power/overcurrent flags in roothub.a */
529         }
530
531         /* Reset USB nearly "by the book".  RemoteWakeupConnected
532          * saved if boot firmware (BIOS/SMM/...) told us it's connected
533          * (for OHCI integrated on mainboard, it normally is)
534          */
535         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
536         ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
537                         hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
538                         ohci->hc_control);
539
540         if (ohci->hc_control & OHCI_CTRL_RWC
541                         && !(ohci->flags & OHCI_QUIRK_AMD756))
542                 ohci_to_hcd(ohci)->can_wakeup = 1;
543
544         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
545         case OHCI_USB_OPER:
546                 temp = 0;
547                 break;
548         case OHCI_USB_SUSPEND:
549         case OHCI_USB_RESUME:
550                 ohci->hc_control &= OHCI_CTRL_RWC;
551                 ohci->hc_control |= OHCI_USB_RESUME;
552                 temp = 10 /* msec wait */;
553                 break;
554         // case OHCI_USB_RESET:
555         default:
556                 ohci->hc_control &= OHCI_CTRL_RWC;
557                 ohci->hc_control |= OHCI_USB_RESET;
558                 temp = 50 /* msec wait */;
559                 break;
560         }
561         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
562         // flush the writes
563         (void) ohci_readl (ohci, &ohci->regs->control);
564         msleep(temp);
565         temp = roothub_a (ohci);
566         if (!(temp & RH_A_NPS)) {
567                 /* power down each port */
568                 for (temp = 0; temp < ohci->num_ports; temp++)
569                         ohci_writel (ohci, RH_PS_LSDA,
570                                 &ohci->regs->roothub.portstatus [temp]);
571         }
572         // flush those writes
573         (void) ohci_readl (ohci, &ohci->regs->control);
574         memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
575
576         /* 2msec timelimit here means no irqs/preempt */
577         spin_lock_irq (&ohci->lock);
578
579 retry:
580         /* HC Reset requires max 10 us delay */
581         ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
582         temp = 30;      /* ... allow extra time */
583         while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
584                 if (--temp == 0) {
585                         spin_unlock_irq (&ohci->lock);
586                         ohci_err (ohci, "USB HC reset timed out!\n");
587                         return -1;
588                 }
589                 udelay (1);
590         }
591
592         /* now we're in the SUSPEND state ... must go OPERATIONAL
593          * within 2msec else HC enters RESUME
594          *
595          * ... but some hardware won't init fmInterval "by the book"
596          * (SiS, OPTi ...), so reset again instead.  SiS doesn't need
597          * this if we write fmInterval after we're OPERATIONAL.
598          * Unclear about ALi, ServerWorks, and others ... this could
599          * easily be a longstanding bug in chip init on Linux.
600          */
601         if (ohci->flags & OHCI_QUIRK_INITRESET) {
602                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
603                 // flush those writes
604                 (void) ohci_readl (ohci, &ohci->regs->control);
605         }
606
607         /* Tell the controller where the control and bulk lists are
608          * The lists are empty now. */
609         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
610         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
611
612         /* a reset clears this */
613         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
614
615         periodic_reinit (ohci);
616
617         /* some OHCI implementations are finicky about how they init.
618          * bogus values here mean not even enumeration could work.
619          */
620         if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
621                         || !ohci_readl (ohci, &ohci->regs->periodicstart)) {
622                 if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
623                         ohci->flags |= OHCI_QUIRK_INITRESET;
624                         ohci_dbg (ohci, "enabling initreset quirk\n");
625                         goto retry;
626                 }
627                 spin_unlock_irq (&ohci->lock);
628                 ohci_err (ohci, "init err (%08x %04x)\n",
629                         ohci_readl (ohci, &ohci->regs->fminterval),
630                         ohci_readl (ohci, &ohci->regs->periodicstart));
631                 return -EOVERFLOW;
632         }
633
634         /* start controller operations */
635         ohci->hc_control &= OHCI_CTRL_RWC;
636         ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
637         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
638         ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
639
640         /* wake on ConnectStatusChange, matching external hubs */
641         ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
642
643         /* Choose the interrupts we care about now, others later on demand */
644         mask = OHCI_INTR_INIT;
645         ohci_writel (ohci, mask, &ohci->regs->intrstatus);
646         ohci_writel (ohci, mask, &ohci->regs->intrenable);
647
648         /* handle root hub init quirks ... */
649         temp = roothub_a (ohci);
650         temp &= ~(RH_A_PSM | RH_A_OCPM);
651         if (ohci->flags & OHCI_QUIRK_SUPERIO) {
652                 /* NSC 87560 and maybe others */
653                 temp |= RH_A_NOCP;
654                 temp &= ~(RH_A_POTPGT | RH_A_NPS);
655                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
656         } else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
657                 /* hub power always on; required for AMD-756 and some
658                  * Mac platforms.  ganged overcurrent reporting, if any.
659                  */
660                 temp |= RH_A_NPS;
661                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
662         }
663         ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
664         ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
665                                                 &ohci->regs->roothub.b);
666         // flush those writes
667         (void) ohci_readl (ohci, &ohci->regs->control);
668
669         spin_unlock_irq (&ohci->lock);
670
671         // POTPGT delay is bits 24-31, in 2 ms units.
672         mdelay ((temp >> 23) & 0x1fe);
673         ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
674
675         ohci_dump (ohci, 1);
676
677         if (ohci_to_hcd(ohci)->self.root_hub == NULL) {
678                 register_reboot_notifier (&ohci->reboot_notifier);
679                 create_debug_files (ohci);
680         }
681
682         return 0;
683 }
684
685 /*-------------------------------------------------------------------------*/
686
687 /* an interrupt happens */
688
689 static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
690 {
691         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
692         struct ohci_regs __iomem *regs = ohci->regs;
693         int                     ints; 
694
695         /* we can eliminate a (slow) ohci_readl()
696            if _only_ WDH caused this irq */
697         if ((ohci->hcca->done_head != 0)
698                         && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
699                                 & 0x01)) {
700                 ints =  OHCI_INTR_WDH;
701
702         /* cardbus/... hardware gone before remove() */
703         } else if ((ints = ohci_readl (ohci, &regs->intrstatus)) == ~(u32)0) {
704                 disable (ohci);
705                 ohci_dbg (ohci, "device removed!\n");
706                 return IRQ_HANDLED;
707
708         /* interrupt for some other device? */
709         } else if ((ints &= ohci_readl (ohci, &regs->intrenable)) == 0) {
710                 return IRQ_NOTMINE;
711         } 
712
713         if (ints & OHCI_INTR_UE) {
714                 disable (ohci);
715                 ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
716                 // e.g. due to PCI Master/Target Abort
717
718                 ohci_dump (ohci, 1);
719                 ohci_usb_reset (ohci);
720         }
721
722         if (ints & OHCI_INTR_RD) {
723                 ohci_vdbg (ohci, "resume detect\n");
724                 ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
725                 if (hcd->state != HC_STATE_QUIESCING)
726                         usb_hcd_resume_root_hub(hcd);
727         }
728
729         if (ints & OHCI_INTR_WDH) {
730                 if (HC_IS_RUNNING(hcd->state))
731                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrdisable);  
732                 spin_lock (&ohci->lock);
733                 dl_done_list (ohci, ptregs);
734                 spin_unlock (&ohci->lock);
735                 if (HC_IS_RUNNING(hcd->state))
736                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable); 
737         }
738   
739         /* could track INTR_SO to reduce available PCI/... bandwidth */
740
741         /* handle any pending URB/ED unlinks, leaving INTR_SF enabled
742          * when there's still unlinking to be done (next frame).
743          */
744         spin_lock (&ohci->lock);
745         if (ohci->ed_rm_list)
746                 finish_unlinks (ohci, ohci_frame_no(ohci), ptregs);
747         if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
748                         && HC_IS_RUNNING(hcd->state))
749                 ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);   
750         spin_unlock (&ohci->lock);
751
752         if (HC_IS_RUNNING(hcd->state)) {
753                 ohci_writel (ohci, ints, &regs->intrstatus);
754                 ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);   
755                 // flush those writes
756                 (void) ohci_readl (ohci, &ohci->regs->control);
757         }
758
759         return IRQ_HANDLED;
760 }
761
762 /*-------------------------------------------------------------------------*/
763
764 static void ohci_stop (struct usb_hcd *hcd)
765 {       
766         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
767
768         ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
769                 hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
770                 hcd->state);
771         ohci_dump (ohci, 1);
772
773         flush_scheduled_work();
774
775         ohci_usb_reset (ohci);
776         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
777         
778         remove_debug_files (ohci);
779         unregister_reboot_notifier (&ohci->reboot_notifier);
780         ohci_mem_cleanup (ohci);
781         if (ohci->hcca) {
782                 dma_free_coherent (hcd->self.controller, 
783                                 sizeof *ohci->hcca, 
784                                 ohci->hcca, ohci->hcca_dma);
785                 ohci->hcca = NULL;
786                 ohci->hcca_dma = 0;
787         }
788 }
789
790 /*-------------------------------------------------------------------------*/
791
792 /* must not be called from interrupt context */
793
794 #ifdef  CONFIG_PM
795
796 static int ohci_restart (struct ohci_hcd *ohci)
797 {
798         int temp;
799         int i;
800         struct urb_priv *priv;
801         struct usb_device *root = ohci_to_hcd(ohci)->self.root_hub;
802
803         /* mark any devices gone, so they do nothing till khubd disconnects.
804          * recycle any "live" eds/tds (and urbs) right away.
805          * later, khubd disconnect processing will recycle the other state,
806          * (either as disconnect/reconnect, or maybe someday as a reset).
807          */ 
808         spin_lock_irq(&ohci->lock);
809         disable (ohci);
810         for (i = 0; i < root->maxchild; i++) {
811                 if (root->children [i])
812                         usb_set_device_state (root->children[i],
813                                 USB_STATE_NOTATTACHED);
814         }
815         if (!list_empty (&ohci->pending))
816                 ohci_dbg(ohci, "abort schedule...\n");
817         list_for_each_entry (priv, &ohci->pending, pending) {
818                 struct urb      *urb = priv->td[0]->urb;
819                 struct ed       *ed = priv->ed;
820
821                 switch (ed->state) {
822                 case ED_OPER:
823                         ed->state = ED_UNLINK;
824                         ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
825                         ed_deschedule (ohci, ed);
826
827                         ed->ed_next = ohci->ed_rm_list;
828                         ed->ed_prev = NULL;
829                         ohci->ed_rm_list = ed;
830                         /* FALLTHROUGH */
831                 case ED_UNLINK:
832                         break;
833                 default:
834                         ohci_dbg(ohci, "bogus ed %p state %d\n",
835                                         ed, ed->state);
836                 }
837
838                 spin_lock (&urb->lock);
839                 urb->status = -ESHUTDOWN;
840                 spin_unlock (&urb->lock);
841         }
842         finish_unlinks (ohci, 0, NULL);
843         spin_unlock_irq(&ohci->lock);
844
845         /* paranoia, in case that didn't work: */
846
847         /* empty the interrupt branches */
848         for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
849         for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
850         
851         /* no EDs to remove */
852         ohci->ed_rm_list = NULL;
853
854         /* empty control and bulk lists */       
855         ohci->ed_controltail = NULL;
856         ohci->ed_bulktail    = NULL;
857
858         if ((temp = ohci_run (ohci)) < 0) {
859                 ohci_err (ohci, "can't restart, %d\n", temp);
860                 return temp;
861         } else {
862                 /* here we "know" root ports should always stay powered,
863                  * and that if we try to turn them back on the root hub
864                  * will respond to CSC processing.
865                  */
866                 i = ohci->num_ports;
867                 while (i--)
868                         ohci_writel (ohci, RH_PS_PSS,
869                                 &ohci->regs->roothub.portstatus [temp]);
870                 ohci_dbg (ohci, "restart complete\n");
871         }
872         return 0;
873 }
874 #endif
875
876 /*-------------------------------------------------------------------------*/
877
878 #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
879
880 MODULE_AUTHOR (DRIVER_AUTHOR);
881 MODULE_DESCRIPTION (DRIVER_INFO);
882 MODULE_LICENSE ("GPL");
883
884 #ifdef CONFIG_PCI
885 #include "ohci-pci.c"
886 #endif
887
888 #ifdef CONFIG_SA1111
889 #include "ohci-sa1111.c"
890 #endif
891
892 #ifdef CONFIG_ARCH_S3C2410
893 #include "ohci-s3c2410.c"
894 #endif
895
896 #ifdef CONFIG_ARCH_OMAP
897 #include "ohci-omap.c"
898 #endif
899
900 #ifdef CONFIG_ARCH_LH7A404
901 #include "ohci-lh7a404.c"
902 #endif
903
904 #ifdef CONFIG_PXA27x
905 #include "ohci-pxa27x.c"
906 #endif
907
908 #ifdef CONFIG_SOC_AU1X00
909 #include "ohci-au1xxx.c"
910 #endif
911
912 #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
913 #include "ohci-ppc-soc.c"
914 #endif
915
916 #if !(defined(CONFIG_PCI) \
917       || defined(CONFIG_SA1111) \
918       || defined(CONFIG_ARCH_S3C2410) \
919       || defined(CONFIG_ARCH_OMAP) \
920       || defined (CONFIG_ARCH_LH7A404) \
921       || defined (CONFIG_PXA27x) \
922       || defined (CONFIG_SOC_AU1X00) \
923       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
924         )
925 #error "missing bus glue for ohci-hcd"
926 #endif