1 /* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
12 * The above copyright notice and this permission notice (including the
13 * next paragraph) shall be included in all copies or substantial portions
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
17 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
18 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
19 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
20 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
21 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
22 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
29 * The Bridge device's PCI config space has information about the
30 * fb aperture size and the amount of pre-reserved memory.
32 #define INTEL_GMCH_CTRL 0x52
33 #define INTEL_GMCH_ENABLED 0x4
34 #define INTEL_GMCH_MEM_MASK 0x1
35 #define INTEL_GMCH_MEM_64M 0x1
36 #define INTEL_GMCH_MEM_128M 0
38 #define INTEL_855_GMCH_GMS_MASK (0x7 << 4)
39 #define INTEL_855_GMCH_GMS_DISABLED (0x0 << 4)
40 #define INTEL_855_GMCH_GMS_STOLEN_1M (0x1 << 4)
41 #define INTEL_855_GMCH_GMS_STOLEN_4M (0x2 << 4)
42 #define INTEL_855_GMCH_GMS_STOLEN_8M (0x3 << 4)
43 #define INTEL_855_GMCH_GMS_STOLEN_16M (0x4 << 4)
44 #define INTEL_855_GMCH_GMS_STOLEN_32M (0x5 << 4)
46 #define INTEL_915G_GMCH_GMS_STOLEN_48M (0x6 << 4)
47 #define INTEL_915G_GMCH_GMS_STOLEN_64M (0x7 << 4)
49 /* PCI config space */
51 #define HPLLCC 0xc0 /* 855 only */
52 #define GC_CLOCK_CONTROL_MASK (3 << 0)
53 #define GC_CLOCK_133_200 (0 << 0)
54 #define GC_CLOCK_100_200 (1 << 0)
55 #define GC_CLOCK_100_133 (2 << 0)
56 #define GC_CLOCK_166_250 (3 << 0)
57 #define GCFGC 0xf0 /* 915+ only */
58 #define GC_LOW_FREQUENCY_ENABLE (1 << 7)
59 #define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
60 #define GC_DISPLAY_CLOCK_333_MHZ (4 << 4)
61 #define GC_DISPLAY_CLOCK_MASK (7 << 4)
66 #define VGA_ST01_MDA 0x3ba
67 #define VGA_ST01_CGA 0x3da
69 #define VGA_MSR_WRITE 0x3c2
70 #define VGA_MSR_READ 0x3cc
71 #define VGA_MSR_MEM_EN (1<<1)
72 #define VGA_MSR_CGA_MODE (1<<0)
74 #define VGA_SR_INDEX 0x3c4
75 #define VGA_SR_DATA 0x3c5
77 #define VGA_AR_INDEX 0x3c0
78 #define VGA_AR_VID_EN (1<<5)
79 #define VGA_AR_DATA_WRITE 0x3c0
80 #define VGA_AR_DATA_READ 0x3c1
82 #define VGA_GR_INDEX 0x3ce
83 #define VGA_GR_DATA 0x3cf
85 #define VGA_GR_MEM_READ_MODE_SHIFT 3
86 #define VGA_GR_MEM_READ_MODE_PLANE 1
88 #define VGA_GR_MEM_MODE_MASK 0xc
89 #define VGA_GR_MEM_MODE_SHIFT 2
90 #define VGA_GR_MEM_A0000_AFFFF 0
91 #define VGA_GR_MEM_A0000_BFFFF 1
92 #define VGA_GR_MEM_B0000_B7FFF 2
93 #define VGA_GR_MEM_B0000_BFFFF 3
95 #define VGA_DACMASK 0x3c6
96 #define VGA_DACRX 0x3c7
97 #define VGA_DACWX 0x3c8
98 #define VGA_DACDATA 0x3c9
100 #define VGA_CR_INDEX_MDA 0x3b4
101 #define VGA_CR_DATA_MDA 0x3b5
102 #define VGA_CR_INDEX_CGA 0x3d4
103 #define VGA_CR_DATA_CGA 0x3d5
106 * Memory interface instructions used by the kernel
108 #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
110 #define MI_NOOP MI_INSTR(0, 0)
111 #define MI_USER_INTERRUPT MI_INSTR(0x02, 0)
112 #define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0)
113 #define MI_WAIT_FOR_PLANE_B_FLIP (1<<6)
114 #define MI_WAIT_FOR_PLANE_A_FLIP (1<<2)
115 #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
116 #define MI_FLUSH MI_INSTR(0x04, 0)
117 #define MI_READ_FLUSH (1 << 0)
118 #define MI_EXE_FLUSH (1 << 1)
119 #define MI_NO_WRITE_FLUSH (1 << 2)
120 #define MI_SCENE_COUNT (1 << 3) /* just increment scene count */
121 #define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */
122 #define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0)
123 #define MI_REPORT_HEAD MI_INSTR(0x07, 0)
124 #define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
125 #define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)
126 #define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
127 #define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1)
128 #define MI_STORE_DWORD_INDEX_SHIFT 2
129 #define MI_LOAD_REGISTER_IMM MI_INSTR(0x22, 1)
130 #define MI_BATCH_BUFFER MI_INSTR(0x30, 1)
131 #define MI_BATCH_NON_SECURE (1)
132 #define MI_BATCH_NON_SECURE_I965 (1<<8)
133 #define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0)
136 * 3D instructions used by the kernel
138 #define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags))
140 #define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24))
141 #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19))
142 #define SC_UPDATE_SCISSOR (0x1<<1)
143 #define SC_ENABLE_MASK (0x1<<0)
144 #define SC_ENABLE (0x1<<0)
145 #define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16))
146 #define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
147 #define SCI_YMIN_MASK (0xffff<<16)
148 #define SCI_XMIN_MASK (0xffff<<0)
149 #define SCI_YMAX_MASK (0xffff<<16)
150 #define SCI_XMAX_MASK (0xffff<<0)
151 #define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19))
152 #define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
153 #define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
154 #define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16))
155 #define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4)
156 #define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
157 #define GFX_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
158 #define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
159 #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2)
160 #define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4)
161 #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6)
162 #define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5)
163 #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21)
164 #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20)
165 #define BLT_DEPTH_8 (0<<24)
166 #define BLT_DEPTH_16_565 (1<<24)
167 #define BLT_DEPTH_16_1555 (2<<24)
168 #define BLT_DEPTH_32 (3<<24)
169 #define BLT_ROP_GXCOPY (0xcc<<16)
170 #define XY_SRC_COPY_BLT_SRC_TILED (1<<15) /* 965+ only */
171 #define XY_SRC_COPY_BLT_DST_TILED (1<<11) /* 965+ only */
172 #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
173 #define ASYNC_FLIP (1<<22)
174 #define DISPLAY_PLANE_A (0<<20)
175 #define DISPLAY_PLANE_B (1<<20)
178 * Instruction and interrupt control regs
181 #define PRB0_TAIL 0x02030
182 #define PRB0_HEAD 0x02034
183 #define PRB0_START 0x02038
184 #define PRB0_CTL 0x0203c
185 #define TAIL_ADDR 0x001FFFF8
186 #define HEAD_WRAP_COUNT 0xFFE00000
187 #define HEAD_WRAP_ONE 0x00200000
188 #define HEAD_ADDR 0x001FFFFC
189 #define RING_NR_PAGES 0x001FF000
190 #define RING_REPORT_MASK 0x00000006
191 #define RING_REPORT_64K 0x00000002
192 #define RING_REPORT_128K 0x00000004
193 #define RING_NO_REPORT 0x00000000
194 #define RING_VALID_MASK 0x00000001
195 #define RING_VALID 0x00000001
196 #define RING_INVALID 0x00000000
197 #define PRB1_TAIL 0x02040 /* 915+ only */
198 #define PRB1_HEAD 0x02044 /* 915+ only */
199 #define PRB1_START 0x02048 /* 915+ only */
200 #define PRB1_CTL 0x0204c /* 915+ only */
201 #define ACTHD_I965 0x02074
202 #define HWS_PGA 0x02080
203 #define HWS_ADDRESS_MASK 0xfffff000
204 #define HWS_START_ADDRESS_SHIFT 4
205 #define IPEIR 0x02088
206 #define NOPID 0x02094
207 #define HWSTAM 0x02098
208 #define SCPD0 0x0209c /* 915+ only */
213 #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
214 #define I915_DISPLAY_PORT_INTERRUPT (1<<17)
215 #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
216 #define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14)
217 #define I915_HWB_OOM_INTERRUPT (1<<13)
218 #define I915_SYNC_STATUS_INTERRUPT (1<<12)
219 #define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
220 #define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
221 #define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
222 #define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
223 #define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
224 #define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
225 #define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
226 #define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
227 #define I915_DEBUG_INTERRUPT (1<<2)
228 #define I915_USER_INTERRUPT (1<<1)
229 #define I915_ASLE_INTERRUPT (1<<0)
233 #define INSTPM 0x020c0
234 #define ACTHD 0x020c8
235 #define FW_BLC 0x020d8
236 #define FW_BLC_SELF 0x020e0 /* 915+ only */
237 #define MI_ARB_STATE 0x020e4 /* 915+ only */
238 #define CACHE_MODE_0 0x02120 /* 915+ only */
239 #define CM0_MASK_SHIFT 16
240 #define CM0_IZ_OPT_DISABLE (1<<6)
241 #define CM0_ZR_OPT_DISABLE (1<<5)
242 #define CM0_DEPTH_EVICT_DISABLE (1<<4)
243 #define CM0_COLOR_EVICT_DISABLE (1<<3)
244 #define CM0_DEPTH_WRITE_DISABLE (1<<1)
245 #define CM0_RC_OP_FLUSH_DISABLE (1<<0)
246 #define GFX_FLSH_CNTL 0x02170 /* 915+ only */
249 * Framebuffer compression (915+ only)
252 #define FBC_CFB_BASE 0x03200 /* 4k page aligned */
253 #define FBC_LL_BASE 0x03204 /* 4k page aligned */
254 #define FBC_CONTROL 0x03208
255 #define FBC_CTL_EN (1<<31)
256 #define FBC_CTL_PERIODIC (1<<30)
257 #define FBC_CTL_INTERVAL_SHIFT (16)
258 #define FBC_CTL_UNCOMPRESSIBLE (1<<14)
259 #define FBC_CTL_STRIDE_SHIFT (5)
260 #define FBC_CTL_FENCENO (1<<0)
261 #define FBC_COMMAND 0x0320c
262 #define FBC_CMD_COMPRESS (1<<0)
263 #define FBC_STATUS 0x03210
264 #define FBC_STAT_COMPRESSING (1<<31)
265 #define FBC_STAT_COMPRESSED (1<<30)
266 #define FBC_STAT_MODIFIED (1<<29)
267 #define FBC_STAT_CURRENT_LINE (1<<0)
268 #define FBC_CONTROL2 0x03214
269 #define FBC_CTL_FENCE_DBL (0<<4)
270 #define FBC_CTL_IDLE_IMM (0<<2)
271 #define FBC_CTL_IDLE_FULL (1<<2)
272 #define FBC_CTL_IDLE_LINE (2<<2)
273 #define FBC_CTL_IDLE_DEBUG (3<<2)
274 #define FBC_CTL_CPU_FENCE (1<<1)
275 #define FBC_CTL_PLANEA (0<<0)
276 #define FBC_CTL_PLANEB (1<<0)
277 #define FBC_FENCE_OFF 0x0321b
279 #define FBC_LL_SIZE (1536)
292 # define GPIO_CLOCK_DIR_MASK (1 << 0)
293 # define GPIO_CLOCK_DIR_IN (0 << 1)
294 # define GPIO_CLOCK_DIR_OUT (1 << 1)
295 # define GPIO_CLOCK_VAL_MASK (1 << 2)
296 # define GPIO_CLOCK_VAL_OUT (1 << 3)
297 # define GPIO_CLOCK_VAL_IN (1 << 4)
298 # define GPIO_CLOCK_PULLUP_DISABLE (1 << 5)
299 # define GPIO_DATA_DIR_MASK (1 << 8)
300 # define GPIO_DATA_DIR_IN (0 << 9)
301 # define GPIO_DATA_DIR_OUT (1 << 9)
302 # define GPIO_DATA_VAL_MASK (1 << 10)
303 # define GPIO_DATA_VAL_OUT (1 << 11)
304 # define GPIO_DATA_VAL_IN (1 << 12)
305 # define GPIO_DATA_PULLUP_DISABLE (1 << 13)
308 * Clock control & power management
313 #define VGA_PD 0x6010
314 #define VGA0_PD_P2_DIV_4 (1 << 7)
315 #define VGA0_PD_P1_DIV_2 (1 << 5)
316 #define VGA0_PD_P1_SHIFT 0
317 #define VGA0_PD_P1_MASK (0x1f << 0)
318 #define VGA1_PD_P2_DIV_4 (1 << 15)
319 #define VGA1_PD_P1_DIV_2 (1 << 13)
320 #define VGA1_PD_P1_SHIFT 8
321 #define VGA1_PD_P1_MASK (0x1f << 8)
322 #define DPLL_A 0x06014
323 #define DPLL_B 0x06018
324 #define DPLL_VCO_ENABLE (1 << 31)
325 #define DPLL_DVO_HIGH_SPEED (1 << 30)
326 #define DPLL_SYNCLOCK_ENABLE (1 << 29)
327 #define DPLL_VGA_MODE_DIS (1 << 28)
328 #define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
329 #define DPLLB_MODE_LVDS (2 << 26) /* i915 */
330 #define DPLL_MODE_MASK (3 << 26)
331 #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
332 #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
333 #define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
334 #define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
335 #define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
336 #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
338 #define I915_FIFO_UNDERRUN_STATUS (1UL<<31)
339 #define I915_CRC_ERROR_ENABLE (1UL<<29)
340 #define I915_CRC_DONE_ENABLE (1UL<<28)
341 #define I915_GMBUS_EVENT_ENABLE (1UL<<27)
342 #define I915_VSYNC_INTERRUPT_ENABLE (1UL<<25)
343 #define I915_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24)
344 #define I915_DPST_EVENT_ENABLE (1UL<<23)
345 #define I915_LEGACY_BLC_EVENT_ENABLE (1UL<<22)
346 #define I915_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21)
347 #define I915_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20)
348 #define I915_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */
349 #define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
350 #define I915_OVERLAY_UPDATED_ENABLE (1UL<<16)
351 #define I915_CRC_ERROR_INTERRUPT_STATUS (1UL<<13)
352 #define I915_CRC_DONE_INTERRUPT_STATUS (1UL<<12)
353 #define I915_GMBUS_INTERRUPT_STATUS (1UL<<11)
354 #define I915_VSYNC_INTERRUPT_STATUS (1UL<<9)
355 #define I915_DISPLAY_LINE_COMPARE_STATUS (1UL<<8)
356 #define I915_DPST_EVENT_STATUS (1UL<<7)
357 #define I915_LEGACY_BLC_EVENT_STATUS (1UL<<6)
358 #define I915_ODD_FIELD_INTERRUPT_STATUS (1UL<<5)
359 #define I915_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4)
360 #define I915_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
361 #define I915_VBLANK_INTERRUPT_STATUS (1UL<<1)
362 #define I915_OVERLAY_UPDATED_STATUS (1UL<<0)
364 #define SRX_INDEX 0x3c4
365 #define SRX_DATA 0x3c5
367 #define SR01_SCREEN_OFF (1<<5)
370 #define PPCR_ON (1<<0)
373 #define DVOB_ON (1<<31)
375 #define DVOC_ON (1<<31)
377 #define LVDS_ON (1<<31)
380 #define ADPA_DPMS_MASK (~(3<<10))
381 #define ADPA_DPMS_ON (0<<10)
382 #define ADPA_DPMS_SUSPEND (1<<10)
383 #define ADPA_DPMS_STANDBY (2<<10)
384 #define ADPA_DPMS_OFF (3<<10)
386 #define RING_TAIL 0x00
387 #define TAIL_ADDR 0x001FFFF8
388 #define RING_HEAD 0x04
389 #define HEAD_WRAP_COUNT 0xFFE00000
390 #define HEAD_WRAP_ONE 0x00200000
391 #define HEAD_ADDR 0x001FFFFC
392 #define RING_START 0x08
393 #define START_ADDR 0xFFFFF000
394 #define RING_LEN 0x0C
395 #define RING_NR_PAGES 0x001FF000
396 #define RING_REPORT_MASK 0x00000006
397 #define RING_REPORT_64K 0x00000002
398 #define RING_REPORT_128K 0x00000004
399 #define RING_NO_REPORT 0x00000000
400 #define RING_VALID_MASK 0x00000001
401 #define RING_VALID 0x00000001
402 #define RING_INVALID 0x00000000
404 /* Scratch pad debug 0 reg:
406 #define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
408 * The i830 generation, in LVDS mode, defines P1 as the bit number set within
409 * this field (only one bit may be set).
411 #define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
412 #define DPLL_FPA01_P1_POST_DIV_SHIFT 16
413 /* i830, required in DVO non-gang */
414 #define PLL_P2_DIVIDE_BY_4 (1 << 23)
415 #define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
416 #define PLL_REF_INPUT_DREFCLK (0 << 13)
417 #define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
418 #define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */
419 #define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
420 #define PLL_REF_INPUT_MASK (3 << 13)
421 #define PLL_LOAD_PULSE_PHASE_SHIFT 9
423 * Parallel to Serial Load Pulse phase selection.
424 * Selects the phase for the 10X DPLL clock for the PCIe
425 * digital display port. The range is 4 to 13; 10 or more
426 * is just a flip delay. The default is 6
428 #define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
429 #define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
431 * SDVO multiplier for 945G/GM. Not used on 965.
433 #define SDVO_MULTIPLIER_MASK 0x000000ff
434 #define SDVO_MULTIPLIER_SHIFT_HIRES 4
435 #define SDVO_MULTIPLIER_SHIFT_VGA 0
436 #define DPLL_A_MD 0x0601c /* 965+ only */
438 * UDI pixel divider, controlling how many pixels are stuffed into a packet.
440 * Value is pixels minus 1. Must be set to 1 pixel for SDVO.
442 #define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
443 #define DPLL_MD_UDI_DIVIDER_SHIFT 24
444 /* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
445 #define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
446 #define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
448 * SDVO/UDI pixel multiplier.
450 * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
451 * clock rate is 10 times the DPLL clock. At low resolution/refresh rate
452 * modes, the bus rate would be below the limits, so SDVO allows for stuffing
453 * dummy bytes in the datastream at an increased clock rate, with both sides of
454 * the link knowing how many bytes are fill.
456 * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
457 * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be
458 * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
459 * through an SDVO command.
461 * This register field has values of multiplication factor minus 1, with
462 * a maximum multiplier of 5 for SDVO.
464 #define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
465 #define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
467 * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
468 * This best be set to the default value (3) or the CRT won't work. No,
469 * I don't entirely understand what this does...
471 #define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
472 #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
473 #define DPLL_B_MD 0x06020 /* 965+ only */
478 #define FP_N_DIV_MASK 0x003f0000
479 #define FP_N_DIV_SHIFT 16
480 #define FP_M1_DIV_MASK 0x00003f00
481 #define FP_M1_DIV_SHIFT 8
482 #define FP_M2_DIV_MASK 0x0000003f
483 #define FP_M2_DIV_SHIFT 0
484 #define DPLL_TEST 0x606c
485 #define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
486 #define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
487 #define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
488 #define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
489 #define DPLLB_TEST_N_BYPASS (1 << 19)
490 #define DPLLB_TEST_M_BYPASS (1 << 18)
491 #define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
492 #define DPLLA_TEST_N_BYPASS (1 << 3)
493 #define DPLLA_TEST_M_BYPASS (1 << 2)
494 #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
495 #define D_STATE 0x6104
496 #define CG_2D_DIS 0x6200
497 #define CG_3D_DIS 0x6204
503 #define PALETTE_A 0x0a000
504 #define PALETTE_B 0x0a800
511 * This mirrors the MCHBAR MMIO space whose location is determined by
512 * device 0 function 0's pci config register 0x44 or 0x48 and matches it in
513 * every way. It is not accessible from the CP register read instructions.
516 #define MCHBAR_MIRROR_BASE 0x10000
518 /** 915-945 and GM965 MCH register controlling DRAM channel access */
520 #define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0)
521 #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0)
522 #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0)
523 #define DCC_ADDRESSING_MODE_MASK (3 << 0)
524 #define DCC_CHANNEL_XOR_DISABLE (1 << 10)
526 /** 965 MCH register controlling DRAM channel configuration */
527 #define C0DRB3 0x10206
528 #define C1DRB3 0x10606
534 #define OVADD 0x30000
535 #define DOVSTA 0x30008
536 #define OC_BUF (0x3<<20)
537 #define OGAMC5 0x30010
538 #define OGAMC4 0x30014
539 #define OGAMC3 0x30018
540 #define OGAMC2 0x3001c
541 #define OGAMC1 0x30020
542 #define OGAMC0 0x30024
545 * Display engine regs
548 /* Pipe A timing regs */
549 #define HTOTAL_A 0x60000
550 #define HBLANK_A 0x60004
551 #define HSYNC_A 0x60008
552 #define VTOTAL_A 0x6000c
553 #define VBLANK_A 0x60010
554 #define VSYNC_A 0x60014
555 #define PIPEASRC 0x6001c
556 #define BCLRPAT_A 0x60020
558 /* Pipe B timing regs */
559 #define HTOTAL_B 0x61000
560 #define HBLANK_B 0x61004
561 #define HSYNC_B 0x61008
562 #define VTOTAL_B 0x6100c
563 #define VBLANK_B 0x61010
564 #define VSYNC_B 0x61014
565 #define PIPEBSRC 0x6101c
566 #define BCLRPAT_B 0x61020
568 /* VGA port control */
570 #define ADPA_DAC_ENABLE (1<<31)
571 #define ADPA_DAC_DISABLE 0
572 #define ADPA_PIPE_SELECT_MASK (1<<30)
573 #define ADPA_PIPE_A_SELECT 0
574 #define ADPA_PIPE_B_SELECT (1<<30)
575 #define ADPA_USE_VGA_HVPOLARITY (1<<15)
576 #define ADPA_SETS_HVPOLARITY 0
577 #define ADPA_VSYNC_CNTL_DISABLE (1<<11)
578 #define ADPA_VSYNC_CNTL_ENABLE 0
579 #define ADPA_HSYNC_CNTL_DISABLE (1<<10)
580 #define ADPA_HSYNC_CNTL_ENABLE 0
581 #define ADPA_VSYNC_ACTIVE_HIGH (1<<4)
582 #define ADPA_VSYNC_ACTIVE_LOW 0
583 #define ADPA_HSYNC_ACTIVE_HIGH (1<<3)
584 #define ADPA_HSYNC_ACTIVE_LOW 0
585 #define ADPA_DPMS_MASK (~(3<<10))
586 #define ADPA_DPMS_ON (0<<10)
587 #define ADPA_DPMS_SUSPEND (1<<10)
588 #define ADPA_DPMS_STANDBY (2<<10)
589 #define ADPA_DPMS_OFF (3<<10)
591 /* Hotplug control (945+ only) */
592 #define PORT_HOTPLUG_EN 0x61110
593 #define SDVOB_HOTPLUG_INT_EN (1 << 26)
594 #define SDVOC_HOTPLUG_INT_EN (1 << 25)
595 #define TV_HOTPLUG_INT_EN (1 << 18)
596 #define CRT_HOTPLUG_INT_EN (1 << 9)
597 #define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
599 #define PORT_HOTPLUG_STAT 0x61114
600 #define CRT_HOTPLUG_INT_STATUS (1 << 11)
601 #define TV_HOTPLUG_INT_STATUS (1 << 10)
602 #define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
603 #define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
604 #define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
605 #define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
606 #define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
607 #define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
609 /* SDVO port control */
610 #define SDVOB 0x61140
611 #define SDVOC 0x61160
612 #define SDVO_ENABLE (1 << 31)
613 #define SDVO_PIPE_B_SELECT (1 << 30)
614 #define SDVO_STALL_SELECT (1 << 29)
615 #define SDVO_INTERRUPT_ENABLE (1 << 26)
617 * 915G/GM SDVO pixel multiplier.
619 * Programmed value is multiplier - 1, up to 5x.
621 * \sa DPLL_MD_UDI_MULTIPLIER_MASK
623 #define SDVO_PORT_MULTIPLY_MASK (7 << 23)
624 #define SDVO_PORT_MULTIPLY_SHIFT 23
625 #define SDVO_PHASE_SELECT_MASK (15 << 19)
626 #define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
627 #define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
628 #define SDVOC_GANG_MODE (1 << 16)
629 #define SDVO_BORDER_ENABLE (1 << 7)
630 #define SDVOB_PCIE_CONCURRENCY (1 << 3)
631 #define SDVO_DETECTED (1 << 2)
632 /* Bits to be preserved when writing */
633 #define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26))
634 #define SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26))
636 /* DVO port control */
640 #define DVO_ENABLE (1 << 31)
641 #define DVO_PIPE_B_SELECT (1 << 30)
642 #define DVO_PIPE_STALL_UNUSED (0 << 28)
643 #define DVO_PIPE_STALL (1 << 28)
644 #define DVO_PIPE_STALL_TV (2 << 28)
645 #define DVO_PIPE_STALL_MASK (3 << 28)
646 #define DVO_USE_VGA_SYNC (1 << 15)
647 #define DVO_DATA_ORDER_I740 (0 << 14)
648 #define DVO_DATA_ORDER_FP (1 << 14)
649 #define DVO_VSYNC_DISABLE (1 << 11)
650 #define DVO_HSYNC_DISABLE (1 << 10)
651 #define DVO_VSYNC_TRISTATE (1 << 9)
652 #define DVO_HSYNC_TRISTATE (1 << 8)
653 #define DVO_BORDER_ENABLE (1 << 7)
654 #define DVO_DATA_ORDER_GBRG (1 << 6)
655 #define DVO_DATA_ORDER_RGGB (0 << 6)
656 #define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6)
657 #define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6)
658 #define DVO_VSYNC_ACTIVE_HIGH (1 << 4)
659 #define DVO_HSYNC_ACTIVE_HIGH (1 << 3)
660 #define DVO_BLANK_ACTIVE_HIGH (1 << 2)
661 #define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */
662 #define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */
663 #define DVO_PRESERVE_MASK (0x7<<24)
664 #define DVOA_SRCDIM 0x61124
665 #define DVOB_SRCDIM 0x61144
666 #define DVOC_SRCDIM 0x61164
667 #define DVO_SRCDIM_HORIZONTAL_SHIFT 12
668 #define DVO_SRCDIM_VERTICAL_SHIFT 0
670 /* LVDS port control */
673 * Enables the LVDS port. This bit must be set before DPLLs are enabled, as
674 * the DPLL semantics change when the LVDS is assigned to that pipe.
676 #define LVDS_PORT_EN (1 << 31)
677 /* Selects pipe B for LVDS data. Must be set on pre-965. */
678 #define LVDS_PIPEB_SELECT (1 << 30)
680 * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
683 #define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
684 #define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
685 #define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
687 * Controls the A3 data pair, which contains the additional LSBs for 24 bit
688 * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
691 #define LVDS_A3_POWER_MASK (3 << 6)
692 #define LVDS_A3_POWER_DOWN (0 << 6)
693 #define LVDS_A3_POWER_UP (3 << 6)
695 * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
698 #define LVDS_CLKB_POWER_MASK (3 << 4)
699 #define LVDS_CLKB_POWER_DOWN (0 << 4)
700 #define LVDS_CLKB_POWER_UP (3 << 4)
702 * Controls the B0-B3 data pairs. This must be set to match the DPLL p2
703 * setting for whether we are in dual-channel mode. The B3 pair will
704 * additionally only be powered up when LVDS_A3_POWER_UP is set.
706 #define LVDS_B0B3_POWER_MASK (3 << 2)
707 #define LVDS_B0B3_POWER_DOWN (0 << 2)
708 #define LVDS_B0B3_POWER_UP (3 << 2)
710 /* Panel power sequencing */
711 #define PP_STATUS 0x61200
712 #define PP_ON (1 << 31)
714 * Indicates that all dependencies of the panel are on:
718 * - LVDS/DVOB/DVOC on
720 #define PP_READY (1 << 30)
721 #define PP_SEQUENCE_NONE (0 << 28)
722 #define PP_SEQUENCE_ON (1 << 28)
723 #define PP_SEQUENCE_OFF (2 << 28)
724 #define PP_SEQUENCE_MASK 0x30000000
725 #define PP_CONTROL 0x61204
726 #define POWER_TARGET_ON (1 << 0)
727 #define PP_ON_DELAYS 0x61208
728 #define PP_OFF_DELAYS 0x6120c
729 #define PP_DIVISOR 0x61210
732 #define PFIT_CONTROL 0x61230
733 #define PFIT_ENABLE (1 << 31)
734 #define PFIT_PIPE_MASK (3 << 29)
735 #define PFIT_PIPE_SHIFT 29
736 #define VERT_INTERP_DISABLE (0 << 10)
737 #define VERT_INTERP_BILINEAR (1 << 10)
738 #define VERT_INTERP_MASK (3 << 10)
739 #define VERT_AUTO_SCALE (1 << 9)
740 #define HORIZ_INTERP_DISABLE (0 << 6)
741 #define HORIZ_INTERP_BILINEAR (1 << 6)
742 #define HORIZ_INTERP_MASK (3 << 6)
743 #define HORIZ_AUTO_SCALE (1 << 5)
744 #define PANEL_8TO6_DITHER_ENABLE (1 << 3)
745 #define PFIT_PGM_RATIOS 0x61234
746 #define PFIT_VERT_SCALE_MASK 0xfff00000
747 #define PFIT_HORIZ_SCALE_MASK 0x0000fff0
748 #define PFIT_AUTO_RATIOS 0x61238
750 /* Backlight control */
751 #define BLC_PWM_CTL 0x61254
752 #define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
753 #define BLC_PWM_CTL2 0x61250 /* 965+ only */
754 #define BLM_COMBINATION_MODE (1 << 30)
756 * This is the most significant 15 bits of the number of backlight cycles in a
757 * complete cycle of the modulated backlight control.
759 * The actual value is this field multiplied by two.
761 #define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
762 #define BLM_LEGACY_MODE (1 << 16)
764 * This is the number of cycles out of the backlight modulation cycle for which
765 * the backlight is on.
767 * This field must be no greater than the number of cycles in the complete
768 * backlight modulation cycle.
770 #define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
771 #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
773 /* TV port control */
774 #define TV_CTL 0x68000
775 /** Enables the TV encoder */
776 # define TV_ENC_ENABLE (1 << 31)
777 /** Sources the TV encoder input from pipe B instead of A. */
778 # define TV_ENC_PIPEB_SELECT (1 << 30)
779 /** Outputs composite video (DAC A only) */
780 # define TV_ENC_OUTPUT_COMPOSITE (0 << 28)
781 /** Outputs SVideo video (DAC B/C) */
782 # define TV_ENC_OUTPUT_SVIDEO (1 << 28)
783 /** Outputs Component video (DAC A/B/C) */
784 # define TV_ENC_OUTPUT_COMPONENT (2 << 28)
785 /** Outputs Composite and SVideo (DAC A/B/C) */
786 # define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28)
787 # define TV_TRILEVEL_SYNC (1 << 21)
788 /** Enables slow sync generation (945GM only) */
789 # define TV_SLOW_SYNC (1 << 20)
790 /** Selects 4x oversampling for 480i and 576p */
791 # define TV_OVERSAMPLE_4X (0 << 18)
792 /** Selects 2x oversampling for 720p and 1080i */
793 # define TV_OVERSAMPLE_2X (1 << 18)
794 /** Selects no oversampling for 1080p */
795 # define TV_OVERSAMPLE_NONE (2 << 18)
796 /** Selects 8x oversampling */
797 # define TV_OVERSAMPLE_8X (3 << 18)
798 /** Selects progressive mode rather than interlaced */
799 # define TV_PROGRESSIVE (1 << 17)
800 /** Sets the colorburst to PAL mode. Required for non-M PAL modes. */
801 # define TV_PAL_BURST (1 << 16)
802 /** Field for setting delay of Y compared to C */
803 # define TV_YC_SKEW_MASK (7 << 12)
804 /** Enables a fix for 480p/576p standard definition modes on the 915GM only */
805 # define TV_ENC_SDP_FIX (1 << 11)
807 * Enables a fix for the 915GM only.
809 * Not sure what it does.
811 # define TV_ENC_C0_FIX (1 << 10)
812 /** Bits that must be preserved by software */
813 # define TV_CTL_SAVE ((3 << 8) | (3 << 6))
814 # define TV_FUSE_STATE_MASK (3 << 4)
815 /** Read-only state that reports all features enabled */
816 # define TV_FUSE_STATE_ENABLED (0 << 4)
817 /** Read-only state that reports that Macrovision is disabled in hardware*/
818 # define TV_FUSE_STATE_NO_MACROVISION (1 << 4)
819 /** Read-only state that reports that TV-out is disabled in hardware. */
820 # define TV_FUSE_STATE_DISABLED (2 << 4)
821 /** Normal operation */
822 # define TV_TEST_MODE_NORMAL (0 << 0)
823 /** Encoder test pattern 1 - combo pattern */
824 # define TV_TEST_MODE_PATTERN_1 (1 << 0)
825 /** Encoder test pattern 2 - full screen vertical 75% color bars */
826 # define TV_TEST_MODE_PATTERN_2 (2 << 0)
827 /** Encoder test pattern 3 - full screen horizontal 75% color bars */
828 # define TV_TEST_MODE_PATTERN_3 (3 << 0)
829 /** Encoder test pattern 4 - random noise */
830 # define TV_TEST_MODE_PATTERN_4 (4 << 0)
831 /** Encoder test pattern 5 - linear color ramps */
832 # define TV_TEST_MODE_PATTERN_5 (5 << 0)
834 * This test mode forces the DACs to 50% of full output.
836 * This is used for load detection in combination with TVDAC_SENSE_MASK
838 # define TV_TEST_MODE_MONITOR_DETECT (7 << 0)
839 # define TV_TEST_MODE_MASK (7 << 0)
841 #define TV_DAC 0x68004
843 * Reports that DAC state change logic has reported change (RO).
845 * This gets cleared when TV_DAC_STATE_EN is cleared
847 # define TVDAC_STATE_CHG (1 << 31)
848 # define TVDAC_SENSE_MASK (7 << 28)
849 /** Reports that DAC A voltage is above the detect threshold */
850 # define TVDAC_A_SENSE (1 << 30)
851 /** Reports that DAC B voltage is above the detect threshold */
852 # define TVDAC_B_SENSE (1 << 29)
853 /** Reports that DAC C voltage is above the detect threshold */
854 # define TVDAC_C_SENSE (1 << 28)
856 * Enables DAC state detection logic, for load-based TV detection.
858 * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
859 * to off, for load detection to work.
861 # define TVDAC_STATE_CHG_EN (1 << 27)
862 /** Sets the DAC A sense value to high */
863 # define TVDAC_A_SENSE_CTL (1 << 26)
864 /** Sets the DAC B sense value to high */
865 # define TVDAC_B_SENSE_CTL (1 << 25)
866 /** Sets the DAC C sense value to high */
867 # define TVDAC_C_SENSE_CTL (1 << 24)
868 /** Overrides the ENC_ENABLE and DAC voltage levels */
869 # define DAC_CTL_OVERRIDE (1 << 7)
870 /** Sets the slew rate. Must be preserved in software */
871 # define ENC_TVDAC_SLEW_FAST (1 << 6)
872 # define DAC_A_1_3_V (0 << 4)
873 # define DAC_A_1_1_V (1 << 4)
874 # define DAC_A_0_7_V (2 << 4)
875 # define DAC_A_OFF (3 << 4)
876 # define DAC_B_1_3_V (0 << 2)
877 # define DAC_B_1_1_V (1 << 2)
878 # define DAC_B_0_7_V (2 << 2)
879 # define DAC_B_OFF (3 << 2)
880 # define DAC_C_1_3_V (0 << 0)
881 # define DAC_C_1_1_V (1 << 0)
882 # define DAC_C_0_7_V (2 << 0)
883 # define DAC_C_OFF (3 << 0)
886 * CSC coefficients are stored in a floating point format with 9 bits of
887 * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n,
888 * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
889 * -1 (0x3) being the only legal negative value.
891 #define TV_CSC_Y 0x68010
892 # define TV_RY_MASK 0x07ff0000
893 # define TV_RY_SHIFT 16
894 # define TV_GY_MASK 0x00000fff
895 # define TV_GY_SHIFT 0
897 #define TV_CSC_Y2 0x68014
898 # define TV_BY_MASK 0x07ff0000
899 # define TV_BY_SHIFT 16
901 * Y attenuation for component video.
903 * Stored in 1.9 fixed point.
905 # define TV_AY_MASK 0x000003ff
906 # define TV_AY_SHIFT 0
908 #define TV_CSC_U 0x68018
909 # define TV_RU_MASK 0x07ff0000
910 # define TV_RU_SHIFT 16
911 # define TV_GU_MASK 0x000007ff
912 # define TV_GU_SHIFT 0
914 #define TV_CSC_U2 0x6801c
915 # define TV_BU_MASK 0x07ff0000
916 # define TV_BU_SHIFT 16
918 * U attenuation for component video.
920 * Stored in 1.9 fixed point.
922 # define TV_AU_MASK 0x000003ff
923 # define TV_AU_SHIFT 0
925 #define TV_CSC_V 0x68020
926 # define TV_RV_MASK 0x0fff0000
927 # define TV_RV_SHIFT 16
928 # define TV_GV_MASK 0x000007ff
929 # define TV_GV_SHIFT 0
931 #define TV_CSC_V2 0x68024
932 # define TV_BV_MASK 0x07ff0000
933 # define TV_BV_SHIFT 16
935 * V attenuation for component video.
937 * Stored in 1.9 fixed point.
939 # define TV_AV_MASK 0x000007ff
940 # define TV_AV_SHIFT 0
942 #define TV_CLR_KNOBS 0x68028
943 /** 2s-complement brightness adjustment */
944 # define TV_BRIGHTNESS_MASK 0xff000000
945 # define TV_BRIGHTNESS_SHIFT 24
946 /** Contrast adjustment, as a 2.6 unsigned floating point number */
947 # define TV_CONTRAST_MASK 0x00ff0000
948 # define TV_CONTRAST_SHIFT 16
949 /** Saturation adjustment, as a 2.6 unsigned floating point number */
950 # define TV_SATURATION_MASK 0x0000ff00
951 # define TV_SATURATION_SHIFT 8
952 /** Hue adjustment, as an integer phase angle in degrees */
953 # define TV_HUE_MASK 0x000000ff
954 # define TV_HUE_SHIFT 0
956 #define TV_CLR_LEVEL 0x6802c
957 /** Controls the DAC level for black */
958 # define TV_BLACK_LEVEL_MASK 0x01ff0000
959 # define TV_BLACK_LEVEL_SHIFT 16
960 /** Controls the DAC level for blanking */
961 # define TV_BLANK_LEVEL_MASK 0x000001ff
962 # define TV_BLANK_LEVEL_SHIFT 0
964 #define TV_H_CTL_1 0x68030
965 /** Number of pixels in the hsync. */
966 # define TV_HSYNC_END_MASK 0x1fff0000
967 # define TV_HSYNC_END_SHIFT 16
968 /** Total number of pixels minus one in the line (display and blanking). */
969 # define TV_HTOTAL_MASK 0x00001fff
970 # define TV_HTOTAL_SHIFT 0
972 #define TV_H_CTL_2 0x68034
973 /** Enables the colorburst (needed for non-component color) */
974 # define TV_BURST_ENA (1 << 31)
975 /** Offset of the colorburst from the start of hsync, in pixels minus one. */
976 # define TV_HBURST_START_SHIFT 16
977 # define TV_HBURST_START_MASK 0x1fff0000
978 /** Length of the colorburst */
979 # define TV_HBURST_LEN_SHIFT 0
980 # define TV_HBURST_LEN_MASK 0x0001fff
982 #define TV_H_CTL_3 0x68038
983 /** End of hblank, measured in pixels minus one from start of hsync */
984 # define TV_HBLANK_END_SHIFT 16
985 # define TV_HBLANK_END_MASK 0x1fff0000
986 /** Start of hblank, measured in pixels minus one from start of hsync */
987 # define TV_HBLANK_START_SHIFT 0
988 # define TV_HBLANK_START_MASK 0x0001fff
990 #define TV_V_CTL_1 0x6803c
992 # define TV_NBR_END_SHIFT 16
993 # define TV_NBR_END_MASK 0x07ff0000
995 # define TV_VI_END_F1_SHIFT 8
996 # define TV_VI_END_F1_MASK 0x00003f00
998 # define TV_VI_END_F2_SHIFT 0
999 # define TV_VI_END_F2_MASK 0x0000003f
1001 #define TV_V_CTL_2 0x68040
1002 /** Length of vsync, in half lines */
1003 # define TV_VSYNC_LEN_MASK 0x07ff0000
1004 # define TV_VSYNC_LEN_SHIFT 16
1005 /** Offset of the start of vsync in field 1, measured in one less than the
1006 * number of half lines.
1008 # define TV_VSYNC_START_F1_MASK 0x00007f00
1009 # define TV_VSYNC_START_F1_SHIFT 8
1011 * Offset of the start of vsync in field 2, measured in one less than the
1012 * number of half lines.
1014 # define TV_VSYNC_START_F2_MASK 0x0000007f
1015 # define TV_VSYNC_START_F2_SHIFT 0
1017 #define TV_V_CTL_3 0x68044
1018 /** Enables generation of the equalization signal */
1019 # define TV_EQUAL_ENA (1 << 31)
1020 /** Length of vsync, in half lines */
1021 # define TV_VEQ_LEN_MASK 0x007f0000
1022 # define TV_VEQ_LEN_SHIFT 16
1023 /** Offset of the start of equalization in field 1, measured in one less than
1024 * the number of half lines.
1026 # define TV_VEQ_START_F1_MASK 0x0007f00
1027 # define TV_VEQ_START_F1_SHIFT 8
1029 * Offset of the start of equalization in field 2, measured in one less than
1030 * the number of half lines.
1032 # define TV_VEQ_START_F2_MASK 0x000007f
1033 # define TV_VEQ_START_F2_SHIFT 0
1035 #define TV_V_CTL_4 0x68048
1037 * Offset to start of vertical colorburst, measured in one less than the
1038 * number of lines from vertical start.
1040 # define TV_VBURST_START_F1_MASK 0x003f0000
1041 # define TV_VBURST_START_F1_SHIFT 16
1043 * Offset to the end of vertical colorburst, measured in one less than the
1044 * number of lines from the start of NBR.
1046 # define TV_VBURST_END_F1_MASK 0x000000ff
1047 # define TV_VBURST_END_F1_SHIFT 0
1049 #define TV_V_CTL_5 0x6804c
1051 * Offset to start of vertical colorburst, measured in one less than the
1052 * number of lines from vertical start.
1054 # define TV_VBURST_START_F2_MASK 0x003f0000
1055 # define TV_VBURST_START_F2_SHIFT 16
1057 * Offset to the end of vertical colorburst, measured in one less than the
1058 * number of lines from the start of NBR.
1060 # define TV_VBURST_END_F2_MASK 0x000000ff
1061 # define TV_VBURST_END_F2_SHIFT 0
1063 #define TV_V_CTL_6 0x68050
1065 * Offset to start of vertical colorburst, measured in one less than the
1066 * number of lines from vertical start.
1068 # define TV_VBURST_START_F3_MASK 0x003f0000
1069 # define TV_VBURST_START_F3_SHIFT 16
1071 * Offset to the end of vertical colorburst, measured in one less than the
1072 * number of lines from the start of NBR.
1074 # define TV_VBURST_END_F3_MASK 0x000000ff
1075 # define TV_VBURST_END_F3_SHIFT 0
1077 #define TV_V_CTL_7 0x68054
1079 * Offset to start of vertical colorburst, measured in one less than the
1080 * number of lines from vertical start.
1082 # define TV_VBURST_START_F4_MASK 0x003f0000
1083 # define TV_VBURST_START_F4_SHIFT 16
1085 * Offset to the end of vertical colorburst, measured in one less than the
1086 * number of lines from the start of NBR.
1088 # define TV_VBURST_END_F4_MASK 0x000000ff
1089 # define TV_VBURST_END_F4_SHIFT 0
1091 #define TV_SC_CTL_1 0x68060
1092 /** Turns on the first subcarrier phase generation DDA */
1093 # define TV_SC_DDA1_EN (1 << 31)
1094 /** Turns on the first subcarrier phase generation DDA */
1095 # define TV_SC_DDA2_EN (1 << 30)
1096 /** Turns on the first subcarrier phase generation DDA */
1097 # define TV_SC_DDA3_EN (1 << 29)
1098 /** Sets the subcarrier DDA to reset frequency every other field */
1099 # define TV_SC_RESET_EVERY_2 (0 << 24)
1100 /** Sets the subcarrier DDA to reset frequency every fourth field */
1101 # define TV_SC_RESET_EVERY_4 (1 << 24)
1102 /** Sets the subcarrier DDA to reset frequency every eighth field */
1103 # define TV_SC_RESET_EVERY_8 (2 << 24)
1104 /** Sets the subcarrier DDA to never reset the frequency */
1105 # define TV_SC_RESET_NEVER (3 << 24)
1106 /** Sets the peak amplitude of the colorburst.*/
1107 # define TV_BURST_LEVEL_MASK 0x00ff0000
1108 # define TV_BURST_LEVEL_SHIFT 16
1109 /** Sets the increment of the first subcarrier phase generation DDA */
1110 # define TV_SCDDA1_INC_MASK 0x00000fff
1111 # define TV_SCDDA1_INC_SHIFT 0
1113 #define TV_SC_CTL_2 0x68064
1114 /** Sets the rollover for the second subcarrier phase generation DDA */
1115 # define TV_SCDDA2_SIZE_MASK 0x7fff0000
1116 # define TV_SCDDA2_SIZE_SHIFT 16
1117 /** Sets the increent of the second subcarrier phase generation DDA */
1118 # define TV_SCDDA2_INC_MASK 0x00007fff
1119 # define TV_SCDDA2_INC_SHIFT 0
1121 #define TV_SC_CTL_3 0x68068
1122 /** Sets the rollover for the third subcarrier phase generation DDA */
1123 # define TV_SCDDA3_SIZE_MASK 0x7fff0000
1124 # define TV_SCDDA3_SIZE_SHIFT 16
1125 /** Sets the increent of the third subcarrier phase generation DDA */
1126 # define TV_SCDDA3_INC_MASK 0x00007fff
1127 # define TV_SCDDA3_INC_SHIFT 0
1129 #define TV_WIN_POS 0x68070
1130 /** X coordinate of the display from the start of horizontal active */
1131 # define TV_XPOS_MASK 0x1fff0000
1132 # define TV_XPOS_SHIFT 16
1133 /** Y coordinate of the display from the start of vertical active (NBR) */
1134 # define TV_YPOS_MASK 0x00000fff
1135 # define TV_YPOS_SHIFT 0
1137 #define TV_WIN_SIZE 0x68074
1138 /** Horizontal size of the display window, measured in pixels*/
1139 # define TV_XSIZE_MASK 0x1fff0000
1140 # define TV_XSIZE_SHIFT 16
1142 * Vertical size of the display window, measured in pixels.
1144 * Must be even for interlaced modes.
1146 # define TV_YSIZE_MASK 0x00000fff
1147 # define TV_YSIZE_SHIFT 0
1149 #define TV_FILTER_CTL_1 0x68080
1151 * Enables automatic scaling calculation.
1153 * If set, the rest of the registers are ignored, and the calculated values can
1154 * be read back from the register.
1156 # define TV_AUTO_SCALE (1 << 31)
1158 * Disables the vertical filter.
1160 * This is required on modes more than 1024 pixels wide */
1161 # define TV_V_FILTER_BYPASS (1 << 29)
1162 /** Enables adaptive vertical filtering */
1163 # define TV_VADAPT (1 << 28)
1164 # define TV_VADAPT_MODE_MASK (3 << 26)
1165 /** Selects the least adaptive vertical filtering mode */
1166 # define TV_VADAPT_MODE_LEAST (0 << 26)
1167 /** Selects the moderately adaptive vertical filtering mode */
1168 # define TV_VADAPT_MODE_MODERATE (1 << 26)
1169 /** Selects the most adaptive vertical filtering mode */
1170 # define TV_VADAPT_MODE_MOST (3 << 26)
1172 * Sets the horizontal scaling factor.
1174 * This should be the fractional part of the horizontal scaling factor divided
1175 * by the oversampling rate. TV_HSCALE should be less than 1, and set to:
1177 * (src width - 1) / ((oversample * dest width) - 1)
1179 # define TV_HSCALE_FRAC_MASK 0x00003fff
1180 # define TV_HSCALE_FRAC_SHIFT 0
1182 #define TV_FILTER_CTL_2 0x68084
1184 * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
1186 * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
1188 # define TV_VSCALE_INT_MASK 0x00038000
1189 # define TV_VSCALE_INT_SHIFT 15
1191 * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
1193 * \sa TV_VSCALE_INT_MASK
1195 # define TV_VSCALE_FRAC_MASK 0x00007fff
1196 # define TV_VSCALE_FRAC_SHIFT 0
1198 #define TV_FILTER_CTL_3 0x68088
1200 * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
1202 * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
1204 * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
1206 # define TV_VSCALE_IP_INT_MASK 0x00038000
1207 # define TV_VSCALE_IP_INT_SHIFT 15
1209 * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
1211 * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
1213 * \sa TV_VSCALE_IP_INT_MASK
1215 # define TV_VSCALE_IP_FRAC_MASK 0x00007fff
1216 # define TV_VSCALE_IP_FRAC_SHIFT 0
1218 #define TV_CC_CONTROL 0x68090
1219 # define TV_CC_ENABLE (1 << 31)
1221 * Specifies which field to send the CC data in.
1223 * CC data is usually sent in field 0.
1225 # define TV_CC_FID_MASK (1 << 27)
1226 # define TV_CC_FID_SHIFT 27
1227 /** Sets the horizontal position of the CC data. Usually 135. */
1228 # define TV_CC_HOFF_MASK 0x03ff0000
1229 # define TV_CC_HOFF_SHIFT 16
1230 /** Sets the vertical position of the CC data. Usually 21 */
1231 # define TV_CC_LINE_MASK 0x0000003f
1232 # define TV_CC_LINE_SHIFT 0
1234 #define TV_CC_DATA 0x68094
1235 # define TV_CC_RDY (1 << 31)
1236 /** Second word of CC data to be transmitted. */
1237 # define TV_CC_DATA_2_MASK 0x007f0000
1238 # define TV_CC_DATA_2_SHIFT 16
1239 /** First word of CC data to be transmitted. */
1240 # define TV_CC_DATA_1_MASK 0x0000007f
1241 # define TV_CC_DATA_1_SHIFT 0
1243 #define TV_H_LUMA_0 0x68100
1244 #define TV_H_LUMA_59 0x681ec
1245 #define TV_H_CHROMA_0 0x68200
1246 #define TV_H_CHROMA_59 0x682ec
1247 #define TV_V_LUMA_0 0x68300
1248 #define TV_V_LUMA_42 0x683a8
1249 #define TV_V_CHROMA_0 0x68400
1250 #define TV_V_CHROMA_42 0x684a8
1252 /* Display & cursor control */
1255 #define PIPEADSL 0x70000
1256 #define PIPEACONF 0x70008
1257 #define PIPEACONF_ENABLE (1<<31)
1258 #define PIPEACONF_DISABLE 0
1259 #define PIPEACONF_DOUBLE_WIDE (1<<30)
1260 #define I965_PIPECONF_ACTIVE (1<<30)
1261 #define PIPEACONF_SINGLE_WIDE 0
1262 #define PIPEACONF_PIPE_UNLOCKED 0
1263 #define PIPEACONF_PIPE_LOCKED (1<<25)
1264 #define PIPEACONF_PALETTE 0
1265 #define PIPEACONF_GAMMA (1<<24)
1266 #define PIPECONF_FORCE_BORDER (1<<25)
1267 #define PIPECONF_PROGRESSIVE (0 << 21)
1268 #define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
1269 #define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
1270 #define PIPEASTAT 0x70024
1271 #define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31)
1272 #define PIPE_CRC_ERROR_ENABLE (1UL<<29)
1273 #define PIPE_CRC_DONE_ENABLE (1UL<<28)
1274 #define PIPE_GMBUS_EVENT_ENABLE (1UL<<27)
1275 #define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26)
1276 #define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25)
1277 #define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24)
1278 #define PIPE_DPST_EVENT_ENABLE (1UL<<23)
1279 #define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22)
1280 #define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21)
1281 #define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20)
1282 #define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */
1283 #define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */
1284 #define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17)
1285 #define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16)
1286 #define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13)
1287 #define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12)
1288 #define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11)
1289 #define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10)
1290 #define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9)
1291 #define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8)
1292 #define PIPE_DPST_EVENT_STATUS (1UL<<7)
1293 #define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6)
1294 #define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5)
1295 #define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4)
1296 #define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */
1297 #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
1298 #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1)
1299 #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0)
1301 #define DSPARB 0x70030
1302 #define DSPARB_CSTART_MASK (0x7f << 7)
1303 #define DSPARB_CSTART_SHIFT 7
1304 #define DSPARB_BSTART_MASK (0x7f)
1305 #define DSPARB_BSTART_SHIFT 0
1307 * The two pipe frame counter registers are not synchronized, so
1308 * reading a stable value is somewhat tricky. The following code
1312 * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
1313 * PIPE_FRAME_HIGH_SHIFT;
1314 * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
1315 * PIPE_FRAME_LOW_SHIFT);
1316 * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
1317 * PIPE_FRAME_HIGH_SHIFT);
1318 * } while (high1 != high2);
1319 * frame = (high1 << 8) | low1;
1321 #define PIPEAFRAMEHIGH 0x70040
1322 #define PIPE_FRAME_HIGH_MASK 0x0000ffff
1323 #define PIPE_FRAME_HIGH_SHIFT 0
1324 #define PIPEAFRAMEPIXEL 0x70044
1325 #define PIPE_FRAME_LOW_MASK 0xff000000
1326 #define PIPE_FRAME_LOW_SHIFT 24
1327 #define PIPE_PIXEL_MASK 0x00ffffff
1328 #define PIPE_PIXEL_SHIFT 0
1330 /* Cursor A & B regs */
1331 #define CURACNTR 0x70080
1332 #define CURSOR_MODE_DISABLE 0x00
1333 #define CURSOR_MODE_64_32B_AX 0x07
1334 #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
1335 #define MCURSOR_GAMMA_ENABLE (1 << 26)
1336 #define CURABASE 0x70084
1337 #define CURAPOS 0x70088
1338 #define CURSOR_POS_MASK 0x007FF
1339 #define CURSOR_POS_SIGN 0x8000
1340 #define CURSOR_X_SHIFT 0
1341 #define CURSOR_Y_SHIFT 16
1342 #define CURBCNTR 0x700c0
1343 #define CURBBASE 0x700c4
1344 #define CURBPOS 0x700c8
1346 /* Display A control */
1347 #define DSPACNTR 0x70180
1348 #define DISPLAY_PLANE_ENABLE (1<<31)
1349 #define DISPLAY_PLANE_DISABLE 0
1350 #define DISPPLANE_GAMMA_ENABLE (1<<30)
1351 #define DISPPLANE_GAMMA_DISABLE 0
1352 #define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
1353 #define DISPPLANE_8BPP (0x2<<26)
1354 #define DISPPLANE_15_16BPP (0x4<<26)
1355 #define DISPPLANE_16BPP (0x5<<26)
1356 #define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
1357 #define DISPPLANE_32BPP (0x7<<26)
1358 #define DISPPLANE_STEREO_ENABLE (1<<25)
1359 #define DISPPLANE_STEREO_DISABLE 0
1360 #define DISPPLANE_SEL_PIPE_MASK (1<<24)
1361 #define DISPPLANE_SEL_PIPE_A 0
1362 #define DISPPLANE_SEL_PIPE_B (1<<24)
1363 #define DISPPLANE_SRC_KEY_ENABLE (1<<22)
1364 #define DISPPLANE_SRC_KEY_DISABLE 0
1365 #define DISPPLANE_LINE_DOUBLE (1<<20)
1366 #define DISPPLANE_NO_LINE_DOUBLE 0
1367 #define DISPPLANE_STEREO_POLARITY_FIRST 0
1368 #define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
1369 #define DSPAADDR 0x70184
1370 #define DSPASTRIDE 0x70188
1371 #define DSPAPOS 0x7018C /* reserved */
1372 #define DSPASIZE 0x70190
1373 #define DSPASURF 0x7019C /* 965+ only */
1374 #define DSPATILEOFF 0x701A4 /* 965+ only */
1377 #define SWF00 0x71410
1378 #define SWF01 0x71414
1379 #define SWF02 0x71418
1380 #define SWF03 0x7141c
1381 #define SWF04 0x71420
1382 #define SWF05 0x71424
1383 #define SWF06 0x71428
1384 #define SWF10 0x70410
1385 #define SWF11 0x70414
1386 #define SWF14 0x71420
1387 #define SWF30 0x72414
1388 #define SWF31 0x72418
1389 #define SWF32 0x7241c
1392 #define PIPEBDSL 0x71000
1393 #define PIPEBCONF 0x71008
1394 #define PIPEBSTAT 0x71024
1395 #define PIPEBFRAMEHIGH 0x71040
1396 #define PIPEBFRAMEPIXEL 0x71044
1398 /* Display B control */
1399 #define DSPBCNTR 0x71180
1400 #define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
1401 #define DISPPLANE_ALPHA_TRANS_DISABLE 0
1402 #define DISPPLANE_SPRITE_ABOVE_DISPLAY 0
1403 #define DISPPLANE_SPRITE_ABOVE_OVERLAY (1)
1404 #define DSPBADDR 0x71184
1405 #define DSPBSTRIDE 0x71188
1406 #define DSPBPOS 0x7118C
1407 #define DSPBSIZE 0x71190
1408 #define DSPBSURF 0x7119C
1409 #define DSPBTILEOFF 0x711A4
1412 #define VGACNTRL 0x71400
1413 # define VGA_DISP_DISABLE (1 << 31)
1414 # define VGA_2X_MODE (1 << 30)
1415 # define VGA_PIPE_B_SELECT (1 << 29)
1417 #endif /* _I915_REG_H_ */
projects / linux-2.6 / blob