V4L/DVB (6205): pvrusb2: Fix oops in error leg cleanup
[linux-2.6] / drivers / media / video / w9968cf.c
1 /***************************************************************************
2  * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip.       *
3  *                                                                         *
4  * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
5  *                                                                         *
6  * - Memory management code from bttv driver by Ralph Metzler,             *
7  *   Marcus Metzler and Gerd Knorr.                                        *
8  * - I2C interface to kernel, high-level image sensor control routines and *
9  *   some symbolic names from OV511 driver by Mark W. McClelland.          *
10  * - Low-level I2C fast write function by Piotr Czerczak.                  *
11  * - Low-level I2C read function by Frederic Jouault.                      *
12  *                                                                         *
13  * This program is free software; you can redistribute it and/or modify    *
14  * it under the terms of the GNU General Public License as published by    *
15  * the Free Software Foundation; either version 2 of the License, or       *
16  * (at your option) any later version.                                     *
17  *                                                                         *
18  * This program is distributed in the hope that it will be useful,         *
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
21  * GNU General Public License for more details.                            *
22  *                                                                         *
23  * You should have received a copy of the GNU General Public License       *
24  * along with this program; if not, write to the Free Software             *
25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
26  ***************************************************************************/
27
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/fs.h>
33 #include <linux/vmalloc.h>
34 #include <linux/slab.h>
35 #include <linux/mm.h>
36 #include <linux/string.h>
37 #include <linux/errno.h>
38 #include <linux/sched.h>
39 #include <linux/ioctl.h>
40 #include <linux/delay.h>
41 #include <linux/stddef.h>
42 #include <asm/page.h>
43 #include <asm/uaccess.h>
44 #include <linux/page-flags.h>
45
46 #include "w9968cf.h"
47 #include "w9968cf_decoder.h"
48
49 static struct w9968cf_vpp_t* w9968cf_vpp;
50 static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
51
52 static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
53 static DEFINE_MUTEX(w9968cf_devlist_mutex); /* semaphore for list traversal */
54
55 static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */
56
57
58 /****************************************************************************
59  * Module macros and parameters                                             *
60  ****************************************************************************/
61
62 MODULE_DEVICE_TABLE(usb, winbond_id_table);
63
64 MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL);
65 MODULE_DESCRIPTION(W9968CF_MODULE_NAME);
66 MODULE_VERSION(W9968CF_MODULE_VERSION);
67 MODULE_LICENSE(W9968CF_MODULE_LICENSE);
68 MODULE_SUPPORTED_DEVICE("Video");
69
70 static int ovmod_load = W9968CF_OVMOD_LOAD;
71 static unsigned short simcams = W9968CF_SIMCAMS;
72 static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
73 static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
74                                      W9968CF_PACKET_SIZE};
75 static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] =
76                                        W9968CF_BUFFERS};
77 static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] =
78                               W9968CF_DOUBLE_BUFFER};
79 static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING};
80 static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] =
81                                       W9968CF_FILTER_TYPE};
82 static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW};
83 static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] =
84                                          W9968CF_DECOMPRESSION};
85 static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING};
86 static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0};
87 static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB};
88 static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT};
89 static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP};
90 static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] =
91                                      W9968CF_LIGHTFREQ};
92 static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]=
93                               W9968CF_BANDINGFILTER};
94 static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV};
95 static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT};
96 static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR};
97 static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME};
98 static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
99                                     W9968CF_BRIGHTNESS};
100 static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE};
101 static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR};
102 static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] =
103                                   W9968CF_CONTRAST};
104 static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
105                                    W9968CF_WHITENESS};
106 #ifdef W9968CF_DEBUG
107 static unsigned short debug = W9968CF_DEBUG_LEVEL;
108 static int specific_debug = W9968CF_SPECIFIC_DEBUG;
109 #endif
110
111 static unsigned int param_nv[24]; /* number of values per parameter */
112
113 #ifdef CONFIG_KMOD
114 module_param(ovmod_load, bool, 0644);
115 #endif
116 module_param(simcams, ushort, 0644);
117 module_param_array(video_nr, short, &param_nv[0], 0444);
118 module_param_array(packet_size, uint, &param_nv[1], 0444);
119 module_param_array(max_buffers, ushort, &param_nv[2], 0444);
120 module_param_array(double_buffer, bool, &param_nv[3], 0444);
121 module_param_array(clamping, bool, &param_nv[4], 0444);
122 module_param_array(filter_type, ushort, &param_nv[5], 0444);
123 module_param_array(largeview, bool, &param_nv[6], 0444);
124 module_param_array(decompression, ushort, &param_nv[7], 0444);
125 module_param_array(upscaling, bool, &param_nv[8], 0444);
126 module_param_array(force_palette, ushort, &param_nv[9], 0444);
127 module_param_array(force_rgb, ushort, &param_nv[10], 0444);
128 module_param_array(autobright, bool, &param_nv[11], 0444);
129 module_param_array(autoexp, bool, &param_nv[12], 0444);
130 module_param_array(lightfreq, ushort, &param_nv[13], 0444);
131 module_param_array(bandingfilter, bool, &param_nv[14], 0444);
132 module_param_array(clockdiv, short, &param_nv[15], 0444);
133 module_param_array(backlight, bool, &param_nv[16], 0444);
134 module_param_array(mirror, bool, &param_nv[17], 0444);
135 module_param_array(monochrome, bool, &param_nv[18], 0444);
136 module_param_array(brightness, uint, &param_nv[19], 0444);
137 module_param_array(hue, uint, &param_nv[20], 0444);
138 module_param_array(colour, uint, &param_nv[21], 0444);
139 module_param_array(contrast, uint, &param_nv[22], 0444);
140 module_param_array(whiteness, uint, &param_nv[23], 0444);
141 #ifdef W9968CF_DEBUG
142 module_param(debug, ushort, 0644);
143 module_param(specific_debug, bool, 0644);
144 #endif
145
146 #ifdef CONFIG_KMOD
147 MODULE_PARM_DESC(ovmod_load,
148                  "\n<0|1> Automatic 'ovcamchip' module loading."
149                  "\n0 disabled, 1 enabled."
150                  "\nIf enabled,'insmod' searches for the required 'ovcamchip'"
151                  "\nmodule in the system, according to its configuration, and"
152                  "\nattempts to load that module automatically. This action is"
153                  "\nperformed once as soon as the 'w9968cf' module is loaded"
154                  "\ninto memory."
155                  "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
156                  "\n");
157 #endif
158 MODULE_PARM_DESC(simcams,
159                  "\n<n> Number of cameras allowed to stream simultaneously."
160                  "\nn may vary from 0 to "
161                  __MODULE_STRING(W9968CF_MAX_DEVICES)"."
162                  "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"."
163                  "\n");
164 MODULE_PARM_DESC(video_nr,
165                  "\n<-1|n[,...]> Specify V4L minor mode number."
166                  "\n -1 = use next available (default)"
167                  "\n  n = use minor number n (integer >= 0)"
168                  "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES)
169                  " cameras this way."
170                  "\nFor example:"
171                  "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
172                  "\nthe second camera and use auto for the first"
173                  "\none and for every other camera."
174                  "\n");
175 MODULE_PARM_DESC(packet_size,
176                  "\n<n[,...]> Specify the maximum data payload"
177                  "\nsize in bytes for alternate settings, for each device."
178                  "\nn is scaled between 63 and 1023 "
179                  "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")."
180                  "\n");
181 MODULE_PARM_DESC(max_buffers,
182                  "\n<n[,...]> For advanced users."
183                  "\nSpecify the maximum number of video frame buffers"
184                  "\nto allocate for each device, from 2 to "
185                  __MODULE_STRING(W9968CF_MAX_BUFFERS)
186                  ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")."
187                  "\n");
188 MODULE_PARM_DESC(double_buffer,
189                  "\n<0|1[,...]> "
190                  "Hardware double buffering: 0 disabled, 1 enabled."
191                  "\nIt should be enabled if you want smooth video output: if"
192                  "\nyou obtain out of sync. video, disable it, or try to"
193                  "\ndecrease the 'clockdiv' module parameter value."
194                  "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER)
195                  " for every device."
196                  "\n");
197 MODULE_PARM_DESC(clamping,
198                  "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled."
199                  "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING)
200                  " for every device."
201                  "\n");
202 MODULE_PARM_DESC(filter_type,
203                  "\n<0|1|2[,...]> Video filter type."
204                  "\n0 none, 1 (1-2-1) 3-tap filter, "
205                  "2 (2-3-6-3-2) 5-tap filter."
206                  "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE)
207                  " for every device."
208                  "\nThe filter is used to reduce noise and aliasing artifacts"
209                  "\nproduced by the CCD or CMOS image sensor, and the scaling"
210                  " process."
211                  "\n");
212 MODULE_PARM_DESC(largeview,
213                  "\n<0|1[,...]> Large view: 0 disabled, 1 enabled."
214                  "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW)
215                  " for every device."
216                  "\n");
217 MODULE_PARM_DESC(upscaling,
218                  "\n<0|1[,...]> Software scaling (for non-compressed video):"
219                  "\n0 disabled, 1 enabled."
220                  "\nDisable it if you have a slow CPU or you don't have"
221                  " enough memory."
222                  "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING)
223                  " for every device."
224                  "\nIf 'w9968cf-vpp' is not present, this parameter is"
225                  " set to 0."
226                  "\n");
227 MODULE_PARM_DESC(decompression,
228                  "\n<0|1|2[,...]> Software video decompression:"
229                  "\n- 0 disables decompression (doesn't allow formats needing"
230                  " decompression)"
231                  "\n- 1 forces decompression (allows formats needing"
232                  " decompression only);"
233                  "\n- 2 allows any permitted formats."
234                  "\nFormats supporting compressed video are YUV422P and"
235                  " YUV420P/YUV420 "
236                  "\nin any resolutions where both width and height are "
237                  "a multiple of 16."
238                  "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION)
239                  " for every device."
240                  "\nIf 'w9968cf-vpp' is not present, forcing decompression is "
241                  "\nnot allowed; in this case this parameter is set to 2."
242                  "\n");
243 MODULE_PARM_DESC(force_palette,
244                  "\n<0"
245                  "|" __MODULE_STRING(VIDEO_PALETTE_UYVY)
246                  "|" __MODULE_STRING(VIDEO_PALETTE_YUV420)
247                  "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P)
248                  "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P)
249                  "|" __MODULE_STRING(VIDEO_PALETTE_YUYV)
250                  "|" __MODULE_STRING(VIDEO_PALETTE_YUV422)
251                  "|" __MODULE_STRING(VIDEO_PALETTE_GREY)
252                  "|" __MODULE_STRING(VIDEO_PALETTE_RGB555)
253                  "|" __MODULE_STRING(VIDEO_PALETTE_RGB565)
254                  "|" __MODULE_STRING(VIDEO_PALETTE_RGB24)
255                  "|" __MODULE_STRING(VIDEO_PALETTE_RGB32)
256                  "[,...]>"
257                  " Force picture palette."
258                  "\nIn order:"
259                  "\n- 0 allows any of the following formats:"
260                  "\n- UYVY    16 bpp - Original video, compression disabled"
261                  "\n- YUV420  12 bpp - Original video, compression enabled"
262                  "\n- YUV422P 16 bpp - Original video, compression enabled"
263                  "\n- YUV420P 12 bpp - Original video, compression enabled"
264                  "\n- YUVY    16 bpp - Software conversion from UYVY"
265                  "\n- YUV422  16 bpp - Software conversion from UYVY"
266                  "\n- GREY     8 bpp - Software conversion from UYVY"
267                  "\n- RGB555  16 bpp - Software conversion from UYVY"
268                  "\n- RGB565  16 bpp - Software conversion from UYVY"
269                  "\n- RGB24   24 bpp - Software conversion from UYVY"
270                  "\n- RGB32   32 bpp - Software conversion from UYVY"
271                  "\nWhen not 0, this parameter will override 'decompression'."
272                  "\nDefault value is 0 for every device."
273                  "\nInitial palette is "
274                  __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"."
275                  "\nIf 'w9968cf-vpp' is not present, this parameter is"
276                  " set to 9 (UYVY)."
277                  "\n");
278 MODULE_PARM_DESC(force_rgb,
279                  "\n<0|1[,...]> Read RGB video data instead of BGR:"
280                  "\n 1 = use RGB component ordering."
281                  "\n 0 = use BGR component ordering."
282                  "\nThis parameter has effect when using RGBX palettes only."
283                  "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB)
284                  " for every device."
285                  "\n");
286 MODULE_PARM_DESC(autobright,
287                  "\n<0|1[,...]> Image sensor automatically changes brightness:"
288                  "\n 0 = no, 1 = yes"
289                  "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT)
290                  " for every device."
291                  "\n");
292 MODULE_PARM_DESC(autoexp,
293                  "\n<0|1[,...]> Image sensor automatically changes exposure:"
294                  "\n 0 = no, 1 = yes"
295                  "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP)
296                  " for every device."
297                  "\n");
298 MODULE_PARM_DESC(lightfreq,
299                  "\n<50|60[,...]> Light frequency in Hz:"
300                  "\n 50 for European and Asian lighting,"
301                  " 60 for American lighting."
302                  "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ)
303                  " for every device."
304                  "\n");
305 MODULE_PARM_DESC(bandingfilter,
306                  "\n<0|1[,...]> Banding filter to reduce effects of"
307                  " fluorescent lighting:"
308                  "\n 0 disabled, 1 enabled."
309                  "\nThis filter tries to reduce the pattern of horizontal"
310                  "\nlight/dark bands caused by some (usually fluorescent)"
311                  " lighting."
312                  "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER)
313                  " for every device."
314                  "\n");
315 MODULE_PARM_DESC(clockdiv,
316                  "\n<-1|n[,...]> "
317                  "Force pixel clock divisor to a specific value (for experts):"
318                  "\n  n may vary from 0 to 127."
319                  "\n -1 for automatic value."
320                  "\nSee also the 'double_buffer' module parameter."
321                  "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV)
322                  " for every device."
323                  "\n");
324 MODULE_PARM_DESC(backlight,
325                  "\n<0|1[,...]> Objects are lit from behind:"
326                  "\n 0 = no, 1 = yes"
327                  "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT)
328                  " for every device."
329                  "\n");
330 MODULE_PARM_DESC(mirror,
331                  "\n<0|1[,...]> Reverse image horizontally:"
332                  "\n 0 = no, 1 = yes"
333                  "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR)
334                  " for every device."
335                  "\n");
336 MODULE_PARM_DESC(monochrome,
337                  "\n<0|1[,...]> Use image sensor as monochrome sensor:"
338                  "\n 0 = no, 1 = yes"
339                  "\nNot all the sensors support monochrome color."
340                  "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME)
341                  " for every device."
342                  "\n");
343 MODULE_PARM_DESC(brightness,
344                  "\n<n[,...]> Set picture brightness (0-65535)."
345                  "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS)
346                  " for every device."
347                  "\nThis parameter has no effect if 'autobright' is enabled."
348                  "\n");
349 MODULE_PARM_DESC(hue,
350                  "\n<n[,...]> Set picture hue (0-65535)."
351                  "\nDefault value is "__MODULE_STRING(W9968CF_HUE)
352                  " for every device."
353                  "\n");
354 MODULE_PARM_DESC(colour,
355                  "\n<n[,...]> Set picture saturation (0-65535)."
356                  "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR)
357                  " for every device."
358                  "\n");
359 MODULE_PARM_DESC(contrast,
360                  "\n<n[,...]> Set picture contrast (0-65535)."
361                  "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST)
362                  " for every device."
363                  "\n");
364 MODULE_PARM_DESC(whiteness,
365                  "\n<n[,...]> Set picture whiteness (0-65535)."
366                  "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS)
367                  " for every device."
368                  "\n");
369 #ifdef W9968CF_DEBUG
370 MODULE_PARM_DESC(debug,
371                  "\n<n> Debugging information level, from 0 to 6:"
372                  "\n0 = none (use carefully)"
373                  "\n1 = critical errors"
374                  "\n2 = significant informations"
375                  "\n3 = configuration or general messages"
376                  "\n4 = warnings"
377                  "\n5 = called functions"
378                  "\n6 = function internals"
379                  "\nLevel 5 and 6 are useful for testing only, when only "
380                  "one device is used."
381                  "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"."
382                  "\n");
383 MODULE_PARM_DESC(specific_debug,
384                  "\n<0|1> Enable or disable specific debugging messages:"
385                  "\n0 = print messages concerning every level"
386                  " <= 'debug' level."
387                  "\n1 = print messages concerning the level"
388                  " indicated by 'debug'."
389                  "\nDefault value is "
390                  __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"."
391                  "\n");
392 #endif /* W9968CF_DEBUG */
393
394
395
396 /****************************************************************************
397  * Some prototypes                                                          *
398  ****************************************************************************/
399
400 /* Video4linux interface */
401 static const struct file_operations w9968cf_fops;
402 static int w9968cf_open(struct inode*, struct file*);
403 static int w9968cf_release(struct inode*, struct file*);
404 static int w9968cf_mmap(struct file*, struct vm_area_struct*);
405 static int w9968cf_ioctl(struct inode*, struct file*, unsigned, unsigned long);
406 static ssize_t w9968cf_read(struct file*, char __user *, size_t, loff_t*);
407 static int w9968cf_v4l_ioctl(struct inode*, struct file*, unsigned int,
408                              void __user *);
409
410 /* USB-specific */
411 static int w9968cf_start_transfer(struct w9968cf_device*);
412 static int w9968cf_stop_transfer(struct w9968cf_device*);
413 static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index);
414 static int w9968cf_read_reg(struct w9968cf_device*, u16 index);
415 static int w9968cf_write_fsb(struct w9968cf_device*, u16* data);
416 static int w9968cf_write_sb(struct w9968cf_device*, u16 value);
417 static int w9968cf_read_sb(struct w9968cf_device*);
418 static int w9968cf_upload_quantizationtables(struct w9968cf_device*);
419 static void w9968cf_urb_complete(struct urb *urb);
420
421 /* Low-level I2C (SMBus) I/O */
422 static int w9968cf_smbus_start(struct w9968cf_device*);
423 static int w9968cf_smbus_stop(struct w9968cf_device*);
424 static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v);
425 static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v);
426 static int w9968cf_smbus_write_ack(struct w9968cf_device*);
427 static int w9968cf_smbus_read_ack(struct w9968cf_device*);
428 static int w9968cf_smbus_refresh_bus(struct w9968cf_device*);
429 static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
430                                       u16 address, u8* value);
431 static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address,
432                                            u8 subaddress, u8* value);
433 static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*,
434                                        u16 address, u8 subaddress);
435 static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*,
436                                                 u16 address, u8 subaddress,
437                                                 u8 value);
438
439 /* I2C interface to kernel */
440 static int w9968cf_i2c_init(struct w9968cf_device*);
441 static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr,
442                                   unsigned short flags, char read_write,
443                                   u8 command, int size, union i2c_smbus_data*);
444 static u32 w9968cf_i2c_func(struct i2c_adapter*);
445 static int w9968cf_i2c_attach_inform(struct i2c_client*);
446 static int w9968cf_i2c_detach_inform(struct i2c_client*);
447 static int w9968cf_i2c_control(struct i2c_adapter*, unsigned int cmd,
448                                unsigned long arg);
449
450 /* Memory management */
451 static void* rvmalloc(unsigned long size);
452 static void rvfree(void *mem, unsigned long size);
453 static void w9968cf_deallocate_memory(struct w9968cf_device*);
454 static int  w9968cf_allocate_memory(struct w9968cf_device*);
455
456 /* High-level image sensor control functions */
457 static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val);
458 static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val);
459 static int w9968cf_sensor_cmd(struct w9968cf_device*,
460                               unsigned int cmd, void *arg);
461 static int w9968cf_sensor_init(struct w9968cf_device*);
462 static int w9968cf_sensor_update_settings(struct w9968cf_device*);
463 static int w9968cf_sensor_get_picture(struct w9968cf_device*);
464 static int w9968cf_sensor_update_picture(struct w9968cf_device*,
465                                          struct video_picture pict);
466
467 /* Other helper functions */
468 static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*,
469                                      enum w9968cf_model_id,
470                                      const unsigned short dev_nr);
471 static void w9968cf_adjust_configuration(struct w9968cf_device*);
472 static int w9968cf_turn_on_led(struct w9968cf_device*);
473 static int w9968cf_init_chip(struct w9968cf_device*);
474 static inline u16 w9968cf_valid_palette(u16 palette);
475 static inline u16 w9968cf_valid_depth(u16 palette);
476 static inline u8 w9968cf_need_decompression(u16 palette);
477 static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
478 static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
479 static int w9968cf_postprocess_frame(struct w9968cf_device*,
480                                      struct w9968cf_frame_t*);
481 static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h);
482 static void w9968cf_init_framelist(struct w9968cf_device*);
483 static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
484 static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
485 static void w9968cf_release_resources(struct w9968cf_device*);
486
487
488
489 /****************************************************************************
490  * Symbolic names                                                           *
491  ****************************************************************************/
492
493 /* Used to represent a list of values and their respective symbolic names */
494 struct w9968cf_symbolic_list {
495         const int num;
496         const char *name;
497 };
498
499 /*--------------------------------------------------------------------------
500   Returns the name of the matching element in the symbolic_list array. The
501   end of the list must be marked with an element that has a NULL name.
502   --------------------------------------------------------------------------*/
503 static inline const char *
504 symbolic(struct w9968cf_symbolic_list list[], const int num)
505 {
506         int i;
507
508         for (i = 0; list[i].name != NULL; i++)
509                 if (list[i].num == num)
510                         return (list[i].name);
511
512         return "Unknown";
513 }
514
515 static struct w9968cf_symbolic_list camlist[] = {
516         { W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" },
517         { W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" },
518
519         /* Other cameras (having the same descriptors as Generic W996[87]CF) */
520         { W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" },
521         { W9986CF_MOD_AAU, "AVerMedia AVerTV USB" },
522         { W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" },
523         { W9968CF_MOD_LL, "Lebon LDC-035A" },
524         { W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" },
525         { W9968CF_MOD_OOE, "OmniVision OV8610-EDE" },
526         { W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" },
527         { W9968CF_MOD_PDPII, "Pretec Digi Pen-II" },
528         { W9968CF_MOD_PDP480, "Pretec DigiPen-480" },
529
530         {  -1, NULL }
531 };
532
533 static struct w9968cf_symbolic_list senlist[] = {
534         { CC_OV76BE,   "OV76BE" },
535         { CC_OV7610,   "OV7610" },
536         { CC_OV7620,   "OV7620" },
537         { CC_OV7620AE, "OV7620AE" },
538         { CC_OV6620,   "OV6620" },
539         { CC_OV6630,   "OV6630" },
540         { CC_OV6630AE, "OV6630AE" },
541         { CC_OV6630AF, "OV6630AF" },
542         { -1, NULL }
543 };
544
545 /* Video4Linux1 palettes */
546 static struct w9968cf_symbolic_list v4l1_plist[] = {
547         { VIDEO_PALETTE_GREY,    "GREY" },
548         { VIDEO_PALETTE_HI240,   "HI240" },
549         { VIDEO_PALETTE_RGB565,  "RGB565" },
550         { VIDEO_PALETTE_RGB24,   "RGB24" },
551         { VIDEO_PALETTE_RGB32,   "RGB32" },
552         { VIDEO_PALETTE_RGB555,  "RGB555" },
553         { VIDEO_PALETTE_YUV422,  "YUV422" },
554         { VIDEO_PALETTE_YUYV,    "YUYV" },
555         { VIDEO_PALETTE_UYVY,    "UYVY" },
556         { VIDEO_PALETTE_YUV420,  "YUV420" },
557         { VIDEO_PALETTE_YUV411,  "YUV411" },
558         { VIDEO_PALETTE_RAW,     "RAW" },
559         { VIDEO_PALETTE_YUV422P, "YUV422P" },
560         { VIDEO_PALETTE_YUV411P, "YUV411P" },
561         { VIDEO_PALETTE_YUV420P, "YUV420P" },
562         { VIDEO_PALETTE_YUV410P, "YUV410P" },
563         { -1, NULL }
564 };
565
566 /* Decoder error codes: */
567 static struct w9968cf_symbolic_list decoder_errlist[] = {
568         { W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" },
569         { W9968CF_DEC_ERR_BUF_OVERFLOW,   "Buffer overflow" },
570         { W9968CF_DEC_ERR_NO_SOI,         "SOI marker not found" },
571         { W9968CF_DEC_ERR_NO_SOF0,        "SOF0 marker not found" },
572         { W9968CF_DEC_ERR_NO_SOS,         "SOS marker not found" },
573         { W9968CF_DEC_ERR_NO_EOI,         "EOI marker not found" },
574         { -1, NULL }
575 };
576
577 /* URB error codes: */
578 static struct w9968cf_symbolic_list urb_errlist[] = {
579         { -ENOMEM,    "No memory for allocation of internal structures" },
580         { -ENOSPC,    "The host controller's bandwidth is already consumed" },
581         { -ENOENT,    "URB was canceled by unlink_urb" },
582         { -EXDEV,     "ISO transfer only partially completed" },
583         { -EAGAIN,    "Too match scheduled for the future" },
584         { -ENXIO,     "URB already queued" },
585         { -EFBIG,     "Too much ISO frames requested" },
586         { -ENOSR,     "Buffer error (overrun)" },
587         { -EPIPE,     "Specified endpoint is stalled (device not responding)"},
588         { -EOVERFLOW, "Babble (too much data)" },
589         { -EPROTO,    "Bit-stuff error (bad cable?)" },
590         { -EILSEQ,    "CRC/Timeout" },
591         { -ETIME,     "Device does not respond to token" },
592         { -ETIMEDOUT, "Device does not respond to command" },
593         { -1, NULL }
594 };
595
596 /****************************************************************************
597  * Memory management functions                                              *
598  ****************************************************************************/
599 static void* rvmalloc(unsigned long size)
600 {
601         void* mem;
602         unsigned long adr;
603
604         size = PAGE_ALIGN(size);
605         mem = vmalloc_32(size);
606         if (!mem)
607                 return NULL;
608
609         memset(mem, 0, size); /* Clear the ram out, no junk to the user */
610         adr = (unsigned long) mem;
611         while (size > 0) {
612                 SetPageReserved(vmalloc_to_page((void *)adr));
613                 adr += PAGE_SIZE;
614                 size -= PAGE_SIZE;
615         }
616
617         return mem;
618 }
619
620
621 static void rvfree(void* mem, unsigned long size)
622 {
623         unsigned long adr;
624
625         if (!mem)
626                 return;
627
628         adr = (unsigned long) mem;
629         while ((long) size > 0) {
630                 ClearPageReserved(vmalloc_to_page((void *)adr));
631                 adr += PAGE_SIZE;
632                 size -= PAGE_SIZE;
633         }
634         vfree(mem);
635 }
636
637
638 /*--------------------------------------------------------------------------
639   Deallocate previously allocated memory.
640   --------------------------------------------------------------------------*/
641 static void w9968cf_deallocate_memory(struct w9968cf_device* cam)
642 {
643         u8 i;
644
645         /* Free the isochronous transfer buffers */
646         for (i = 0; i < W9968CF_URBS; i++) {
647                 kfree(cam->transfer_buffer[i]);
648                 cam->transfer_buffer[i] = NULL;
649         }
650
651         /* Free temporary frame buffer */
652         if (cam->frame_tmp.buffer) {
653                 rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size);
654                 cam->frame_tmp.buffer = NULL;
655         }
656
657         /* Free helper buffer */
658         if (cam->frame_vpp.buffer) {
659                 rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size);
660                 cam->frame_vpp.buffer = NULL;
661         }
662
663         /* Free video frame buffers */
664         if (cam->frame[0].buffer) {
665                 rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size);
666                 cam->frame[0].buffer = NULL;
667         }
668
669         cam->nbuffers = 0;
670
671         DBG(5, "Memory successfully deallocated")
672 }
673
674
675 /*--------------------------------------------------------------------------
676   Allocate memory buffers for USB transfers and video frames.
677   This function is called by open() only.
678   Return 0 on success, a negative number otherwise.
679   --------------------------------------------------------------------------*/
680 static int w9968cf_allocate_memory(struct w9968cf_device* cam)
681 {
682         const u16 p_size = wMaxPacketSize[cam->altsetting-1];
683         void* buff = NULL;
684         unsigned long hw_bufsize, vpp_bufsize;
685         u8 i, bpp;
686
687         /* NOTE: Deallocation is done elsewhere in case of error */
688
689         /* Calculate the max amount of raw data per frame from the device */
690         hw_bufsize = cam->maxwidth*cam->maxheight*2;
691
692         /* Calculate the max buf. size needed for post-processing routines */
693         bpp = (w9968cf_vpp) ? 4 : 2;
694         if (cam->upscaling)
695                 vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp,
696                                   cam->maxwidth*cam->maxheight*bpp);
697         else
698                 vpp_bufsize = cam->maxwidth*cam->maxheight*bpp;
699
700         /* Allocate memory for the isochronous transfer buffers */
701         for (i = 0; i < W9968CF_URBS; i++) {
702                 if (!(cam->transfer_buffer[i] =
703                       kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) {
704                         DBG(1, "Couldn't allocate memory for the isochronous "
705                                "transfer buffers (%u bytes)",
706                             p_size * W9968CF_ISO_PACKETS)
707                         return -ENOMEM;
708                 }
709         }
710
711         /* Allocate memory for the temporary frame buffer */
712         if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) {
713                 DBG(1, "Couldn't allocate memory for the temporary "
714                        "video frame buffer (%lu bytes)", hw_bufsize)
715                 return -ENOMEM;
716         }
717         cam->frame_tmp.size = hw_bufsize;
718         cam->frame_tmp.number = -1;
719
720         /* Allocate memory for the helper buffer */
721         if (w9968cf_vpp) {
722                 if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) {
723                         DBG(1, "Couldn't allocate memory for the helper buffer"
724                                " (%lu bytes)", vpp_bufsize)
725                         return -ENOMEM;
726                 }
727                 cam->frame_vpp.size = vpp_bufsize;
728         } else
729                 cam->frame_vpp.buffer = NULL;
730
731         /* Allocate memory for video frame buffers */
732         cam->nbuffers = cam->max_buffers;
733         while (cam->nbuffers >= 2) {
734                 if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize)))
735                         break;
736                 else
737                         cam->nbuffers--;
738         }
739
740         if (!buff) {
741                 DBG(1, "Couldn't allocate memory for the video frame buffers")
742                 cam->nbuffers = 0;
743                 return -ENOMEM;
744         }
745
746         if (cam->nbuffers != cam->max_buffers)
747                 DBG(2, "Couldn't allocate memory for %u video frame buffers. "
748                        "Only memory for %u buffers has been allocated",
749                     cam->max_buffers, cam->nbuffers)
750
751         for (i = 0; i < cam->nbuffers; i++) {
752                 cam->frame[i].buffer = buff + i*vpp_bufsize;
753                 cam->frame[i].size = vpp_bufsize;
754                 cam->frame[i].number = i;
755                 /* Circular list */
756                 if (i != cam->nbuffers-1)
757                         cam->frame[i].next = &cam->frame[i+1];
758                 else
759                         cam->frame[i].next = &cam->frame[0];
760                 cam->frame[i].status = F_UNUSED;
761         }
762
763         DBG(5, "Memory successfully allocated")
764         return 0;
765 }
766
767
768
769 /****************************************************************************
770  * USB-specific functions                                                   *
771  ****************************************************************************/
772
773 /*--------------------------------------------------------------------------
774   This is an handler function which is called after the URBs are completed.
775   It collects multiple data packets coming from the camera by putting them
776   into frame buffers: one or more zero data length data packets are used to
777   mark the end of a video frame; the first non-zero data packet is the start
778   of the next video frame; if an error is encountered in a packet, the entire
779   video frame is discarded and grabbed again.
780   If there are no requested frames in the FIFO list, packets are collected into
781   a temporary buffer.
782   --------------------------------------------------------------------------*/
783 static void w9968cf_urb_complete(struct urb *urb)
784 {
785         struct w9968cf_device* cam = (struct w9968cf_device*)urb->context;
786         struct w9968cf_frame_t** f;
787         unsigned int len, status;
788         void* pos;
789         u8 i;
790         int err = 0;
791
792         if ((!cam->streaming) || cam->disconnected) {
793                 DBG(4, "Got interrupt, but not streaming")
794                 return;
795         }
796
797         /* "(*f)" will be used instead of "cam->frame_current" */
798         f = &cam->frame_current;
799
800         /* If a frame has been requested and we are grabbing into
801            the temporary frame, we'll switch to that requested frame */
802         if ((*f) == &cam->frame_tmp && *cam->requested_frame) {
803                 if (cam->frame_tmp.status == F_GRABBING) {
804                         w9968cf_pop_frame(cam, &cam->frame_current);
805                         (*f)->status = F_GRABBING;
806                         (*f)->length = cam->frame_tmp.length;
807                         memcpy((*f)->buffer, cam->frame_tmp.buffer,
808                                (*f)->length);
809                         DBG(6, "Switched from temp. frame to frame #%d",
810                             (*f)->number)
811                 }
812         }
813
814         for (i = 0; i < urb->number_of_packets; i++) {
815                 len = urb->iso_frame_desc[i].actual_length;
816                 status = urb->iso_frame_desc[i].status;
817                 pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
818
819                 if (status && len != 0) {
820                         DBG(4, "URB failed, error in data packet "
821                                "(error #%u, %s)",
822                             status, symbolic(urb_errlist, status))
823                         (*f)->status = F_ERROR;
824                         continue;
825                 }
826
827                 if (len) { /* start of frame */
828
829                         if ((*f)->status == F_UNUSED) {
830                                 (*f)->status = F_GRABBING;
831                                 (*f)->length = 0;
832                         }
833
834                         /* Buffer overflows shouldn't happen, however...*/
835                         if ((*f)->length + len > (*f)->size) {
836                                 DBG(4, "Buffer overflow: bad data packets")
837                                 (*f)->status = F_ERROR;
838                         }
839
840                         if ((*f)->status == F_GRABBING) {
841                                 memcpy((*f)->buffer + (*f)->length, pos, len);
842                                 (*f)->length += len;
843                         }
844
845                 } else if ((*f)->status == F_GRABBING) { /* end of frame */
846
847                         DBG(6, "Frame #%d successfully grabbed", (*f)->number)
848
849                         if (cam->vpp_flag & VPP_DECOMPRESSION) {
850                                 err = w9968cf_vpp->check_headers((*f)->buffer,
851                                                                  (*f)->length);
852                                 if (err) {
853                                         DBG(4, "Skip corrupted frame: %s",
854                                             symbolic(decoder_errlist, err))
855                                         (*f)->status = F_UNUSED;
856                                         continue; /* grab this frame again */
857                                 }
858                         }
859
860                         (*f)->status = F_READY;
861                         (*f)->queued = 0;
862
863                         /* Take a pointer to the new frame from the FIFO list.
864                            If the list is empty,we'll use the temporary frame*/
865                         if (*cam->requested_frame)
866                                 w9968cf_pop_frame(cam, &cam->frame_current);
867                         else {
868                                 cam->frame_current = &cam->frame_tmp;
869                                 (*f)->status = F_UNUSED;
870                         }
871
872                 } else if ((*f)->status == F_ERROR)
873                         (*f)->status = F_UNUSED; /* grab it again */
874
875                 PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d",
876                       (unsigned long)(*f)->length, i, len, (*f)->status)
877
878         } /* end for */
879
880         /* Resubmit this URB */
881         urb->dev = cam->usbdev;
882         urb->status = 0;
883         spin_lock(&cam->urb_lock);
884         if (cam->streaming)
885                 if ((err = usb_submit_urb(urb, GFP_ATOMIC))) {
886                         cam->misconfigured = 1;
887                         DBG(1, "Couldn't resubmit the URB: error %d, %s",
888                             err, symbolic(urb_errlist, err))
889                 }
890         spin_unlock(&cam->urb_lock);
891
892         /* Wake up the user process */
893         wake_up_interruptible(&cam->wait_queue);
894 }
895
896
897 /*---------------------------------------------------------------------------
898   Setup the URB structures for the isochronous transfer.
899   Submit the URBs so that the data transfer begins.
900   Return 0 on success, a negative number otherwise.
901   ---------------------------------------------------------------------------*/
902 static int w9968cf_start_transfer(struct w9968cf_device* cam)
903 {
904         struct usb_device *udev = cam->usbdev;
905         struct urb* urb;
906         const u16 p_size = wMaxPacketSize[cam->altsetting-1];
907         u16 w, h, d;
908         int vidcapt;
909         u32 t_size;
910         int err = 0;
911         s8 i, j;
912
913         for (i = 0; i < W9968CF_URBS; i++) {
914                 urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL);
915                 cam->urb[i] = urb;
916                 if (!urb) {
917                         for (j = 0; j < i; j++)
918                                 usb_free_urb(cam->urb[j]);
919                         DBG(1, "Couldn't allocate the URB structures")
920                         return -ENOMEM;
921                 }
922
923                 urb->dev = udev;
924                 urb->context = (void*)cam;
925                 urb->pipe = usb_rcvisocpipe(udev, 1);
926                 urb->transfer_flags = URB_ISO_ASAP;
927                 urb->number_of_packets = W9968CF_ISO_PACKETS;
928                 urb->complete = w9968cf_urb_complete;
929                 urb->transfer_buffer = cam->transfer_buffer[i];
930                 urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS;
931                 urb->interval = 1;
932                 for (j = 0; j < W9968CF_ISO_PACKETS; j++) {
933                         urb->iso_frame_desc[j].offset = p_size*j;
934                         urb->iso_frame_desc[j].length = p_size;
935                 }
936         }
937
938         /* Transfer size per frame, in WORD ! */
939         d = cam->hw_depth;
940         w = cam->hw_width;
941         h = cam->hw_height;
942
943         t_size = (w*h*d)/16;
944
945         err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
946         err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
947
948         /* Transfer size */
949         err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */
950         err += w9968cf_write_reg(cam, t_size >> 16, 0x3e);    /* high bits */
951
952         if (cam->vpp_flag & VPP_DECOMPRESSION)
953                 err += w9968cf_upload_quantizationtables(cam);
954
955         vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */
956         err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */
957
958         err += usb_set_interface(udev, 0, cam->altsetting);
959         err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */
960
961         if (err || (vidcapt < 0)) {
962                 for (i = 0; i < W9968CF_URBS; i++)
963                         usb_free_urb(cam->urb[i]);
964                 DBG(1, "Couldn't tell the camera to start the data transfer")
965                 return err;
966         }
967
968         w9968cf_init_framelist(cam);
969
970         /* Begin to grab into the temporary buffer */
971         cam->frame_tmp.status = F_UNUSED;
972         cam->frame_tmp.queued = 0;
973         cam->frame_current = &cam->frame_tmp;
974
975         if (!(cam->vpp_flag & VPP_DECOMPRESSION))
976                 DBG(5, "Isochronous transfer size: %lu bytes/frame",
977                     (unsigned long)t_size*2)
978
979         DBG(5, "Starting the isochronous transfer...")
980
981         cam->streaming = 1;
982
983         /* Submit the URBs */
984         for (i = 0; i < W9968CF_URBS; i++) {
985                 err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
986                 if (err) {
987                         cam->streaming = 0;
988                         for (j = i-1; j >= 0; j--) {
989                                 usb_kill_urb(cam->urb[j]);
990                                 usb_free_urb(cam->urb[j]);
991                         }
992                         DBG(1, "Couldn't send a transfer request to the "
993                                "USB core (error #%d, %s)", err,
994                             symbolic(urb_errlist, err))
995                         return err;
996                 }
997         }
998
999         return 0;
1000 }
1001
1002
1003 /*--------------------------------------------------------------------------
1004   Stop the isochronous transfer and set alternate setting to 0 (0Mb/s).
1005   Return 0 on success, a negative number otherwise.
1006   --------------------------------------------------------------------------*/
1007 static int w9968cf_stop_transfer(struct w9968cf_device* cam)
1008 {
1009         struct usb_device *udev = cam->usbdev;
1010         unsigned long lock_flags;
1011         int err = 0;
1012         s8 i;
1013
1014         if (!cam->streaming)
1015                 return 0;
1016
1017         /* This avoids race conditions with usb_submit_urb()
1018            in the URB completition handler */
1019         spin_lock_irqsave(&cam->urb_lock, lock_flags);
1020         cam->streaming = 0;
1021         spin_unlock_irqrestore(&cam->urb_lock, lock_flags);
1022
1023         for (i = W9968CF_URBS-1; i >= 0; i--)
1024                 if (cam->urb[i]) {
1025                         usb_kill_urb(cam->urb[i]);
1026                         usb_free_urb(cam->urb[i]);
1027                         cam->urb[i] = NULL;
1028                 }
1029
1030         if (cam->disconnected)
1031                 goto exit;
1032
1033         err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */
1034         err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */
1035         err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */
1036         err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */
1037
1038         if (err) {
1039                 DBG(2, "Failed to tell the camera to stop the isochronous "
1040                        "transfer. However this is not a critical error.")
1041                 return -EIO;
1042         }
1043
1044 exit:
1045         DBG(5, "Isochronous transfer stopped")
1046         return 0;
1047 }
1048
1049
1050 /*--------------------------------------------------------------------------
1051   Write a W9968CF register.
1052   Return 0 on success, -1 otherwise.
1053   --------------------------------------------------------------------------*/
1054 static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index)
1055 {
1056         struct usb_device* udev = cam->usbdev;
1057         int res;
1058
1059         res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
1060                               USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
1061                               value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT);
1062
1063         if (res < 0)
1064                 DBG(4, "Failed to write a register "
1065                        "(value 0x%04X, index 0x%02X, error #%d, %s)",
1066                     value, index, res, symbolic(urb_errlist, res))
1067
1068         return (res >= 0) ? 0 : -1;
1069 }
1070
1071
1072 /*--------------------------------------------------------------------------
1073   Read a W9968CF register.
1074   Return the register value on success, -1 otherwise.
1075   --------------------------------------------------------------------------*/
1076 static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index)
1077 {
1078         struct usb_device* udev = cam->usbdev;
1079         u16* buff = cam->control_buffer;
1080         int res;
1081
1082         res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1,
1083                               USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1084                               0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT);
1085
1086         if (res < 0)
1087                 DBG(4, "Failed to read a register "
1088                        "(index 0x%02X, error #%d, %s)",
1089                     index, res, symbolic(urb_errlist, res))
1090
1091         return (res >= 0) ? (int)(*buff) : -1;
1092 }
1093
1094
1095 /*--------------------------------------------------------------------------
1096   Write 64-bit data to the fast serial bus registers.
1097   Return 0 on success, -1 otherwise.
1098   --------------------------------------------------------------------------*/
1099 static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data)
1100 {
1101         struct usb_device* udev = cam->usbdev;
1102         u16 value;
1103         int res;
1104
1105         value = *data++;
1106
1107         res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
1108                               USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
1109                               value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT);
1110
1111         if (res < 0)
1112                 DBG(4, "Failed to write the FSB registers "
1113                        "(error #%d, %s)", res, symbolic(urb_errlist, res))
1114
1115         return (res >= 0) ? 0 : -1;
1116 }
1117
1118
1119 /*--------------------------------------------------------------------------
1120   Write data to the serial bus control register.
1121   Return 0 on success, a negative number otherwise.
1122   --------------------------------------------------------------------------*/
1123 static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value)
1124 {
1125         int err = 0;
1126
1127         err = w9968cf_write_reg(cam, value, 0x01);
1128         udelay(W9968CF_I2C_BUS_DELAY);
1129
1130         return err;
1131 }
1132
1133
1134 /*--------------------------------------------------------------------------
1135   Read data from the serial bus control register.
1136   Return 0 on success, a negative number otherwise.
1137   --------------------------------------------------------------------------*/
1138 static int w9968cf_read_sb(struct w9968cf_device* cam)
1139 {
1140         int v = 0;
1141
1142         v = w9968cf_read_reg(cam, 0x01);
1143         udelay(W9968CF_I2C_BUS_DELAY);
1144
1145         return v;
1146 }
1147
1148
1149 /*--------------------------------------------------------------------------
1150   Upload quantization tables for the JPEG compression.
1151   This function is called by w9968cf_start_transfer().
1152   Return 0 on success, a negative number otherwise.
1153   --------------------------------------------------------------------------*/
1154 static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam)
1155 {
1156         u16 a, b;
1157         int err = 0, i, j;
1158
1159         err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */
1160
1161         for (i = 0, j = 0; i < 32; i++, j += 2) {
1162                 a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
1163                 b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
1164                 err += w9968cf_write_reg(cam, a, 0x40+i);
1165                 err += w9968cf_write_reg(cam, b, 0x60+i);
1166         }
1167         err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */
1168
1169         return err;
1170 }
1171
1172
1173
1174 /****************************************************************************
1175  * Low-level I2C I/O functions.                                             *
1176  * The adapter supports the following I2C transfer functions:               *
1177  * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only)           *
1178  * i2c_adap_read_byte_data()                                                *
1179  * i2c_adap_read_byte()                                                     *
1180  ****************************************************************************/
1181
1182 static int w9968cf_smbus_start(struct w9968cf_device* cam)
1183 {
1184         int err = 0;
1185
1186         err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
1187         err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
1188
1189         return err;
1190 }
1191
1192
1193 static int w9968cf_smbus_stop(struct w9968cf_device* cam)
1194 {
1195         int err = 0;
1196
1197         err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
1198         err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
1199
1200         return err;
1201 }
1202
1203
1204 static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v)
1205 {
1206         u8 bit;
1207         int err = 0, sda;
1208
1209         for (bit = 0 ; bit < 8 ; bit++) {
1210                 sda = (v & 0x80) ? 2 : 0;
1211                 v <<= 1;
1212                 /* SDE=1, SDA=sda, SCL=0 */
1213                 err += w9968cf_write_sb(cam, 0x10 | sda);
1214                 /* SDE=1, SDA=sda, SCL=1 */
1215                 err += w9968cf_write_sb(cam, 0x11 | sda);
1216                 /* SDE=1, SDA=sda, SCL=0 */
1217                 err += w9968cf_write_sb(cam, 0x10 | sda);
1218         }
1219
1220         return err;
1221 }
1222
1223
1224 static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v)
1225 {
1226         u8 bit;
1227         int err = 0;
1228
1229         *v = 0;
1230         for (bit = 0 ; bit < 8 ; bit++) {
1231                 *v <<= 1;
1232                 err += w9968cf_write_sb(cam, 0x0013);
1233                 *v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0;
1234                 err += w9968cf_write_sb(cam, 0x0012);
1235         }
1236
1237         return err;
1238 }
1239
1240
1241 static int w9968cf_smbus_write_ack(struct w9968cf_device* cam)
1242 {
1243         int err = 0;
1244
1245         err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
1246         err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
1247         err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
1248
1249         return err;
1250 }
1251
1252
1253 static int w9968cf_smbus_read_ack(struct w9968cf_device* cam)
1254 {
1255         int err = 0, sda;
1256
1257         err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
1258         sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */
1259         err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */
1260         if (sda < 0)
1261                 err += sda;
1262         if (sda == 1) {
1263                 DBG(6, "Couldn't receive the ACK")
1264                 err += -1;
1265         }
1266
1267         return err;
1268 }
1269
1270
1271 /* This seems to refresh the communication through the serial bus */
1272 static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam)
1273 {
1274         int err = 0, j;
1275
1276         for (j = 1; j <= 10; j++) {
1277                 err = w9968cf_write_reg(cam, 0x0020, 0x01);
1278                 err += w9968cf_write_reg(cam, 0x0000, 0x01);
1279                 if (err)
1280                         break;
1281         }
1282
1283         return err;
1284 }
1285
1286
1287 /* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
1288 static int
1289 w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam,
1290                                      u16 address, u8 subaddress,u8 value)
1291 {
1292         u16* data = cam->data_buffer;
1293         int err = 0;
1294
1295         err += w9968cf_smbus_refresh_bus(cam);
1296
1297         /* Enable SBUS outputs */
1298         err += w9968cf_write_sb(cam, 0x0020);
1299
1300         data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0);
1301         data[0] |= (address & 0x40) ? 0x4000 : 0x0;
1302         data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0);
1303         data[1] |= (address & 0x20) ? 0x0150 : 0x0;
1304         data[1] |= (address & 0x10) ? 0x5400 : 0x0;
1305         data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0);
1306         data[2] |= (address & 0x04) ? 0x0540 : 0x0;
1307         data[2] |= (address & 0x02) ? 0x5000 : 0x0;
1308         data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0);
1309         data[3] |= (address & 0x01) ? 0x0054 : 0x0;
1310
1311         err += w9968cf_write_fsb(cam, data);
1312
1313         data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0);
1314         data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0;
1315         data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0;
1316         data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0);
1317         data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0;
1318         data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0;
1319         data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0;
1320         data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0);
1321         data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0;
1322         data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0;
1323         data[3] = 0x001d;
1324
1325         err += w9968cf_write_fsb(cam, data);
1326
1327         data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
1328         data[0] |= (value & 0x40) ? 0x0540 : 0x0;
1329         data[0] |= (value & 0x20) ? 0x5000 : 0x0;
1330         data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0);
1331         data[1] |= (value & 0x10) ? 0x0054 : 0x0;
1332         data[1] |= (value & 0x08) ? 0x1500 : 0x0;
1333         data[1] |= (value & 0x04) ? 0x4000 : 0x0;
1334         data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0);
1335         data[2] |= (value & 0x02) ? 0x0150 : 0x0;
1336         data[2] |= (value & 0x01) ? 0x5400 : 0x0;
1337         data[3] = 0xfe1d;
1338
1339         err += w9968cf_write_fsb(cam, data);
1340
1341         /* Disable SBUS outputs */
1342         err += w9968cf_write_sb(cam, 0x0000);
1343
1344         if (!err)
1345                 DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X "
1346                        "value 0x%02X", address, subaddress, value)
1347         else
1348                 DBG(5, "I2C write byte data failed, addr.0x%04X, "
1349                        "subaddr.0x%02X, value 0x%02X",
1350                     address, subaddress, value)
1351
1352         return err;
1353 }
1354
1355
1356 /* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
1357 static int
1358 w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam,
1359                                 u16 address, u8 subaddress,
1360                                 u8* value)
1361 {
1362         int err = 0;
1363
1364         /* Serial data enable */
1365         err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */
1366
1367         err += w9968cf_smbus_start(cam);
1368         err += w9968cf_smbus_write_byte(cam, address);
1369         err += w9968cf_smbus_read_ack(cam);
1370         err += w9968cf_smbus_write_byte(cam, subaddress);
1371         err += w9968cf_smbus_read_ack(cam);
1372         err += w9968cf_smbus_stop(cam);
1373         err += w9968cf_smbus_start(cam);
1374         err += w9968cf_smbus_write_byte(cam, address + 1);
1375         err += w9968cf_smbus_read_ack(cam);
1376         err += w9968cf_smbus_read_byte(cam, value);
1377         err += w9968cf_smbus_write_ack(cam);
1378         err += w9968cf_smbus_stop(cam);
1379
1380         /* Serial data disable */
1381         err += w9968cf_write_sb(cam, 0x0000);
1382
1383         if (!err)
1384                 DBG(5, "I2C read byte data done, addr.0x%04X, "
1385                        "subaddr.0x%02X, value 0x%02X",
1386                     address, subaddress, *value)
1387         else
1388                 DBG(5, "I2C read byte data failed, addr.0x%04X, "
1389                        "subaddr.0x%02X, wrong value 0x%02X",
1390                     address, subaddress, *value)
1391
1392         return err;
1393 }
1394
1395
1396 /* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */
1397 static int
1398 w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
1399                            u16 address, u8* value)
1400 {
1401         int err = 0;
1402
1403         /* Serial data enable */
1404         err += w9968cf_write_sb(cam, 0x0013);
1405
1406         err += w9968cf_smbus_start(cam);
1407         err += w9968cf_smbus_write_byte(cam, address + 1);
1408         err += w9968cf_smbus_read_ack(cam);
1409         err += w9968cf_smbus_read_byte(cam, value);
1410         err += w9968cf_smbus_write_ack(cam);
1411         err += w9968cf_smbus_stop(cam);
1412
1413         /* Serial data disable */
1414         err += w9968cf_write_sb(cam, 0x0000);
1415
1416         if (!err)
1417                 DBG(5, "I2C read byte done, addr.0x%04X, "
1418                        "value 0x%02X", address, *value)
1419         else
1420                 DBG(5, "I2C read byte failed, addr.0x%04X, "
1421                        "wrong value 0x%02X", address, *value)
1422
1423         return err;
1424 }
1425
1426
1427 /* SMBus protocol: S Addr Wr [A] Value [A] P */
1428 static int
1429 w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam,
1430                             u16 address, u8 value)
1431 {
1432         DBG(4, "i2c_write_byte() is an unsupported transfer mode")
1433         return -EINVAL;
1434 }
1435
1436
1437
1438 /****************************************************************************
1439  * I2C interface to kernel                                                  *
1440  ****************************************************************************/
1441
1442 static int
1443 w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
1444                        unsigned short flags, char read_write, u8 command,
1445                        int size, union i2c_smbus_data *data)
1446 {
1447         struct w9968cf_device* cam = i2c_get_adapdata(adapter);
1448         u8 i;
1449         int err = 0;
1450
1451         switch (addr) {
1452                 case OV6xx0_SID:
1453                 case OV7xx0_SID:
1454                         break;
1455                 default:
1456                         DBG(4, "Rejected slave ID 0x%04X", addr)
1457                         return -EINVAL;
1458         }
1459
1460         if (size == I2C_SMBUS_BYTE) {
1461                 /* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */
1462                 addr <<= 1;
1463
1464                 if (read_write == I2C_SMBUS_WRITE)
1465                         err = w9968cf_i2c_adap_write_byte(cam, addr, command);
1466                 else if (read_write == I2C_SMBUS_READ)
1467                         err = w9968cf_i2c_adap_read_byte(cam,addr,&data->byte);
1468
1469         } else if (size == I2C_SMBUS_BYTE_DATA) {
1470                 addr <<= 1;
1471
1472                 if (read_write == I2C_SMBUS_WRITE)
1473                         err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr,
1474                                                           command, data->byte);
1475                 else if (read_write == I2C_SMBUS_READ) {
1476                         for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
1477                                 err = w9968cf_i2c_adap_read_byte_data(cam,addr,
1478                                                          command, &data->byte);
1479                                 if (err) {
1480                                         if (w9968cf_smbus_refresh_bus(cam)) {
1481                                                 err = -EIO;
1482                                                 break;
1483                                         }
1484                                 } else
1485                                         break;
1486                         }
1487
1488                 } else
1489                         return -EINVAL;
1490
1491         } else {
1492                 DBG(4, "Unsupported I2C transfer mode (%d)", size)
1493                 return -EINVAL;
1494         }
1495
1496         return err;
1497 }
1498
1499
1500 static u32 w9968cf_i2c_func(struct i2c_adapter* adap)
1501 {
1502         return I2C_FUNC_SMBUS_READ_BYTE |
1503                I2C_FUNC_SMBUS_READ_BYTE_DATA  |
1504                I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
1505 }
1506
1507
1508 static int w9968cf_i2c_attach_inform(struct i2c_client* client)
1509 {
1510         struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
1511         int id = client->driver->id, err = 0;
1512
1513         if (id == I2C_DRIVERID_OVCAMCHIP) {
1514                 cam->sensor_client = client;
1515                 err = w9968cf_sensor_init(cam);
1516                 if (err) {
1517                         cam->sensor_client = NULL;
1518                         return err;
1519                 }
1520         } else {
1521                 DBG(4, "Rejected client [%s] with driver [%s]",
1522                     client->name, client->driver->driver.name)
1523                 return -EINVAL;
1524         }
1525
1526         DBG(5, "I2C attach client [%s] with driver [%s]",
1527             client->name, client->driver->driver.name)
1528
1529         return 0;
1530 }
1531
1532
1533 static int w9968cf_i2c_detach_inform(struct i2c_client* client)
1534 {
1535         struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
1536
1537         if (cam->sensor_client == client)
1538                 cam->sensor_client = NULL;
1539
1540         DBG(5, "I2C detach client [%s]", client->name)
1541
1542         return 0;
1543 }
1544
1545
1546 static int
1547 w9968cf_i2c_control(struct i2c_adapter* adapter, unsigned int cmd,
1548                     unsigned long arg)
1549 {
1550         return 0;
1551 }
1552
1553
1554 static int w9968cf_i2c_init(struct w9968cf_device* cam)
1555 {
1556         int err = 0;
1557
1558         static struct i2c_algorithm algo = {
1559                 .smbus_xfer =    w9968cf_i2c_smbus_xfer,
1560                 .algo_control =  w9968cf_i2c_control,
1561                 .functionality = w9968cf_i2c_func,
1562         };
1563
1564         static struct i2c_adapter adap = {
1565                 .id =                I2C_HW_SMBUS_W9968CF,
1566                 .class =             I2C_CLASS_CAM_DIGITAL,
1567                 .owner =             THIS_MODULE,
1568                 .client_register =   w9968cf_i2c_attach_inform,
1569                 .client_unregister = w9968cf_i2c_detach_inform,
1570                 .algo =              &algo,
1571         };
1572
1573         memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter));
1574         strcpy(cam->i2c_adapter.name, "w9968cf");
1575         cam->i2c_adapter.dev.parent = &cam->usbdev->dev;
1576         i2c_set_adapdata(&cam->i2c_adapter, cam);
1577
1578         DBG(6, "Registering I2C adapter with kernel...")
1579
1580         err = i2c_add_adapter(&cam->i2c_adapter);
1581         if (err)
1582                 DBG(1, "Failed to register the I2C adapter")
1583         else
1584                 DBG(5, "I2C adapter registered")
1585
1586         return err;
1587 }
1588
1589
1590
1591 /****************************************************************************
1592  * Helper functions                                                         *
1593  ****************************************************************************/
1594
1595 /*--------------------------------------------------------------------------
1596   Turn on the LED on some webcams. A beep should be heard too.
1597   Return 0 on success, a negative number otherwise.
1598   --------------------------------------------------------------------------*/
1599 static int w9968cf_turn_on_led(struct w9968cf_device* cam)
1600 {
1601         int err = 0;
1602
1603         err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */
1604         err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
1605         err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
1606         err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */
1607         err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */
1608         err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */
1609
1610         if (err)
1611                 DBG(2, "Couldn't turn on the LED")
1612
1613         DBG(5, "LED turned on")
1614
1615         return err;
1616 }
1617
1618
1619 /*--------------------------------------------------------------------------
1620   Write some registers for the device initialization.
1621   This function is called once on open().
1622   Return 0 on success, a negative number otherwise.
1623   --------------------------------------------------------------------------*/
1624 static int w9968cf_init_chip(struct w9968cf_device* cam)
1625 {
1626         unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2,
1627                       y0 = 0x0000,
1628                       u0 = y0 + hw_bufsize/2,
1629                       v0 = u0 + hw_bufsize/4,
1630                       y1 = v0 + hw_bufsize/4,
1631                       u1 = y1 + hw_bufsize/2,
1632                       v1 = u1 + hw_bufsize/4;
1633         int err = 0;
1634
1635         err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */
1636         err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */
1637
1638         err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */
1639         err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */
1640
1641         err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */
1642         err += w9968cf_write_reg(cam, y0 >> 16, 0x21);    /* Y buf.0, high */
1643         err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */
1644         err += w9968cf_write_reg(cam, u0 >> 16, 0x25);    /* U buf.0, high */
1645         err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */
1646         err += w9968cf_write_reg(cam, v0 >> 16, 0x29);    /* V buf.0, high */
1647
1648         err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */
1649         err += w9968cf_write_reg(cam, y1 >> 16, 0x23);    /* Y buf.1, high */
1650         err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */
1651         err += w9968cf_write_reg(cam, u1 >> 16, 0x27);    /* U buf.1, high */
1652         err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */
1653         err += w9968cf_write_reg(cam, v1 >> 16, 0x2b);    /* V buf.1, high */
1654
1655         err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */
1656         err += w9968cf_write_reg(cam, y1 >> 16, 0x33);    /* JPEG buf 0 high */
1657
1658         err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */
1659         err += w9968cf_write_reg(cam, y1 >> 16, 0x35);    /* JPEG bug 1 high */
1660
1661         err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */
1662         err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/
1663         err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */
1664         err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */
1665
1666         err += w9968cf_set_picture(cam, cam->picture); /* this before */
1667         err += w9968cf_set_window(cam, cam->window);
1668
1669         if (err)
1670                 DBG(1, "Chip initialization failed")
1671         else
1672                 DBG(5, "Chip successfully initialized")
1673
1674         return err;
1675 }
1676
1677
1678 /*--------------------------------------------------------------------------
1679   Return non-zero if the palette is supported, 0 otherwise.
1680   --------------------------------------------------------------------------*/
1681 static inline u16 w9968cf_valid_palette(u16 palette)
1682 {
1683         u8 i = 0;
1684         while (w9968cf_formatlist[i].palette != 0) {
1685                 if (palette == w9968cf_formatlist[i].palette)
1686                         return palette;
1687                 i++;
1688         }
1689         return 0;
1690 }
1691
1692
1693 /*--------------------------------------------------------------------------
1694   Return the depth corresponding to the given palette.
1695   Palette _must_ be supported !
1696   --------------------------------------------------------------------------*/
1697 static inline u16 w9968cf_valid_depth(u16 palette)
1698 {
1699         u8 i=0;
1700         while (w9968cf_formatlist[i].palette != palette)
1701                 i++;
1702
1703         return w9968cf_formatlist[i].depth;
1704 }
1705
1706
1707 /*--------------------------------------------------------------------------
1708   Return non-zero if the format requires decompression, 0 otherwise.
1709   --------------------------------------------------------------------------*/
1710 static inline u8 w9968cf_need_decompression(u16 palette)
1711 {
1712         u8 i = 0;
1713         while (w9968cf_formatlist[i].palette != 0) {
1714                 if (palette == w9968cf_formatlist[i].palette)
1715                         return w9968cf_formatlist[i].compression;
1716                 i++;
1717         }
1718         return 0;
1719 }
1720
1721
1722 /*--------------------------------------------------------------------------
1723   Change the picture settings of the camera.
1724   Return 0 on success, a negative number otherwise.
1725   --------------------------------------------------------------------------*/
1726 static int
1727 w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict)
1728 {
1729         u16 fmt, hw_depth, hw_palette, reg_v = 0x0000;
1730         int err = 0;
1731
1732         /* Make sure we are using a valid depth */
1733         pict.depth = w9968cf_valid_depth(pict.palette);
1734
1735         fmt = pict.palette;
1736
1737         hw_depth = pict.depth; /* depth used by the winbond chip */
1738         hw_palette = pict.palette; /* palette used by the winbond chip */
1739
1740         /* VS & HS polarities */
1741         reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11);
1742
1743         switch (fmt)
1744         {
1745                 case VIDEO_PALETTE_UYVY:
1746                         reg_v |= 0x0000;
1747                         cam->vpp_flag = VPP_NONE;
1748                         break;
1749                 case VIDEO_PALETTE_YUV422P:
1750                         reg_v |= 0x0002;
1751                         cam->vpp_flag = VPP_DECOMPRESSION;
1752                         break;
1753                 case VIDEO_PALETTE_YUV420:
1754                 case VIDEO_PALETTE_YUV420P:
1755                         reg_v |= 0x0003;
1756                         cam->vpp_flag = VPP_DECOMPRESSION;
1757                         break;
1758                 case VIDEO_PALETTE_YUYV:
1759                 case VIDEO_PALETTE_YUV422:
1760                         reg_v |= 0x0000;
1761                         cam->vpp_flag = VPP_SWAP_YUV_BYTES;
1762                         hw_palette = VIDEO_PALETTE_UYVY;
1763                         break;
1764                 /* Original video is used instead of RGBX palettes.
1765                    Software conversion later. */
1766                 case VIDEO_PALETTE_GREY:
1767                 case VIDEO_PALETTE_RGB555:
1768                 case VIDEO_PALETTE_RGB565:
1769                 case VIDEO_PALETTE_RGB24:
1770                 case VIDEO_PALETTE_RGB32:
1771                         reg_v |= 0x0000; /* UYVY 16 bit is used */
1772                         hw_depth = 16;
1773                         hw_palette = VIDEO_PALETTE_UYVY;
1774                         cam->vpp_flag = VPP_UYVY_TO_RGBX;
1775                         break;
1776         }
1777
1778         /* NOTE: due to memory issues, it is better to disable the hardware
1779                  double buffering during compression */
1780         if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION))
1781                 reg_v |= 0x0080;
1782
1783         if (cam->clamping)
1784                 reg_v |= 0x0020;
1785
1786         if (cam->filter_type == 1)
1787                 reg_v |= 0x0008;
1788         else if (cam->filter_type == 2)
1789                 reg_v |= 0x000c;
1790
1791         if ((err = w9968cf_write_reg(cam, reg_v, 0x16)))
1792                 goto error;
1793
1794         if ((err = w9968cf_sensor_update_picture(cam, pict)))
1795                 goto error;
1796
1797         /* If all went well, update the device data structure */
1798         memcpy(&cam->picture, &pict, sizeof(pict));
1799         cam->hw_depth = hw_depth;
1800         cam->hw_palette = hw_palette;
1801
1802         /* Settings changed, so we clear the frame buffers */
1803         memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
1804
1805         DBG(4, "Palette is %s, depth is %u bpp",
1806             symbolic(v4l1_plist, pict.palette), pict.depth)
1807
1808         return 0;
1809
1810 error:
1811         DBG(1, "Failed to change picture settings")
1812         return err;
1813 }
1814
1815
1816 /*--------------------------------------------------------------------------
1817   Change the capture area size of the camera.
1818   This function _must_ be called _after_ w9968cf_set_picture().
1819   Return 0 on success, a negative number otherwise.
1820   --------------------------------------------------------------------------*/
1821 static int
1822 w9968cf_set_window(struct w9968cf_device* cam, struct video_window win)
1823 {
1824         u16 x, y, w, h, scx, scy, cw, ch, ax, ay;
1825         unsigned long fw, fh;
1826         struct ovcamchip_window s_win;
1827         int err = 0;
1828
1829         /* Work around to avoid FP arithmetics */
1830         #define SC(x) ((x) << 10)
1831         #define UNSC(x) ((x) >> 10)
1832
1833         /* Make sure we are using a supported resolution */
1834         if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
1835                                               (u16*)&win.height)))
1836                 goto error;
1837
1838         /* Scaling factors */
1839         fw = SC(win.width) / cam->maxwidth;
1840         fh = SC(win.height) / cam->maxheight;
1841
1842         /* Set up the width and height values used by the chip */
1843         if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) {
1844                 cam->vpp_flag |= VPP_UPSCALE;
1845                 /* Calculate largest w,h mantaining the same w/h ratio */
1846                 w = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
1847                 h = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
1848                 if (w < cam->minwidth) /* just in case */
1849                         w = cam->minwidth;
1850                 if (h < cam->minheight) /* just in case */
1851                         h = cam->minheight;
1852         } else {
1853                 cam->vpp_flag &= ~VPP_UPSCALE;
1854                 w = win.width;
1855                 h = win.height;
1856         }
1857
1858         /* x,y offsets of the cropped area */
1859         scx = cam->start_cropx;
1860         scy = cam->start_cropy;
1861
1862         /* Calculate cropped area manteining the right w/h ratio */
1863         if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) {
1864                 cw = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
1865                 ch = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
1866         } else {
1867                 cw = w;
1868                 ch = h;
1869         }
1870
1871         /* Setup the window of the sensor */
1872         s_win.format = VIDEO_PALETTE_UYVY;
1873         s_win.width = cam->maxwidth;
1874         s_win.height = cam->maxheight;
1875         s_win.quarter = 0; /* full progressive video */
1876
1877         /* Center it */
1878         s_win.x = (s_win.width - cw) / 2;
1879         s_win.y = (s_win.height - ch) / 2;
1880
1881         /* Clock divisor */
1882         if (cam->clockdiv >= 0)
1883                 s_win.clockdiv = cam->clockdiv; /* manual override */
1884         else
1885                 switch (cam->sensor) {
1886                         case CC_OV6620:
1887                                 s_win.clockdiv = 0;
1888                                 break;
1889                         case CC_OV6630:
1890                                 s_win.clockdiv = 0;
1891                                 break;
1892                         case CC_OV76BE:
1893                         case CC_OV7610:
1894                         case CC_OV7620:
1895                                 s_win.clockdiv = 0;
1896                                 break;
1897                         default:
1898                                 s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR;
1899                 }
1900
1901         /* We have to scale win.x and win.y offsets */
1902         if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
1903              || (cam->vpp_flag & VPP_UPSCALE) ) {
1904                 ax = SC(win.x)/fw;
1905                 ay = SC(win.y)/fh;
1906         } else {
1907                 ax = win.x;
1908                 ay = win.y;
1909         }
1910
1911         if ((ax + cw) > cam->maxwidth)
1912                 ax = cam->maxwidth - cw;
1913
1914         if ((ay + ch) > cam->maxheight)
1915                 ay = cam->maxheight - ch;
1916
1917         /* Adjust win.x, win.y */
1918         if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
1919              || (cam->vpp_flag & VPP_UPSCALE) ) {
1920                 win.x = UNSC(ax*fw);
1921                 win.y = UNSC(ay*fh);
1922         } else {
1923                 win.x = ax;
1924                 win.y = ay;
1925         }
1926
1927         /* Offsets used by the chip */
1928         x = ax + s_win.x;
1929         y = ay + s_win.y;
1930
1931         /* Go ! */
1932         if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win)))
1933                 goto error;
1934
1935         err += w9968cf_write_reg(cam, scx + x, 0x10);
1936         err += w9968cf_write_reg(cam, scy + y, 0x11);
1937         err += w9968cf_write_reg(cam, scx + x + cw, 0x12);
1938         err += w9968cf_write_reg(cam, scy + y + ch, 0x13);
1939         err += w9968cf_write_reg(cam, w, 0x14);
1940         err += w9968cf_write_reg(cam, h, 0x15);
1941
1942         /* JPEG width & height */
1943         err += w9968cf_write_reg(cam, w, 0x30);
1944         err += w9968cf_write_reg(cam, h, 0x31);
1945
1946         /* Y & UV frame buffer strides (in WORD) */
1947         if (cam->vpp_flag & VPP_DECOMPRESSION) {
1948                 err += w9968cf_write_reg(cam, w/2, 0x2c);
1949                 err += w9968cf_write_reg(cam, w/4, 0x2d);
1950         } else
1951                 err += w9968cf_write_reg(cam, w, 0x2c);
1952
1953         if (err)
1954                 goto error;
1955
1956         /* If all went well, update the device data structure */
1957         memcpy(&cam->window, &win, sizeof(win));
1958         cam->hw_width = w;
1959         cam->hw_height = h;
1960
1961         /* Settings changed, so we clear the frame buffers */
1962         memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
1963
1964         DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)",
1965             win.width, win.height, win.x, win.y)
1966
1967         PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, "
1968               "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u",
1969               x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y,
1970               win.width, win.height)
1971
1972         return 0;
1973
1974 error:
1975         DBG(1, "Failed to change the capture area size")
1976         return err;
1977 }
1978
1979
1980 /*--------------------------------------------------------------------------
1981   Adjust the asked values for window width and height.
1982   Return 0 on success, -1 otherwise.
1983   --------------------------------------------------------------------------*/
1984 static int
1985 w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
1986 {
1987         u16 maxw, maxh;
1988
1989         if ((*width < cam->minwidth) || (*height < cam->minheight))
1990                 return -ERANGE;
1991
1992         maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
1993                w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
1994                            : cam->maxwidth;
1995         maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
1996                w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
1997                            : cam->maxheight;
1998
1999         if (*width > maxw)
2000                 *width = maxw;
2001         if (*height > maxh)
2002                 *height = maxh;
2003
2004         if (cam->vpp_flag & VPP_DECOMPRESSION) {
2005                 *width  &= ~15L; /* multiple of 16 */
2006                 *height &= ~15L;
2007         }
2008
2009         PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
2010
2011         return 0;
2012 }
2013
2014
2015 /*--------------------------------------------------------------------------
2016   Initialize the FIFO list of requested frames.
2017   --------------------------------------------------------------------------*/
2018 static void w9968cf_init_framelist(struct w9968cf_device* cam)
2019 {
2020         u8 i;
2021
2022         for (i = 0; i < cam->nbuffers; i++) {
2023                 cam->requested_frame[i] = NULL;
2024                 cam->frame[i].queued = 0;
2025                 cam->frame[i].status = F_UNUSED;
2026         }
2027 }
2028
2029
2030 /*--------------------------------------------------------------------------
2031   Add a frame in the FIFO list of requested frames.
2032   This function is called in process context.
2033   --------------------------------------------------------------------------*/
2034 static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num)
2035 {
2036         u8 f;
2037         unsigned long lock_flags;
2038
2039         spin_lock_irqsave(&cam->flist_lock, lock_flags);
2040
2041         for (f=0; cam->requested_frame[f] != NULL; f++);
2042         cam->requested_frame[f] = &cam->frame[f_num];
2043         cam->frame[f_num].queued = 1;
2044         cam->frame[f_num].status = F_UNUSED; /* clear the status */
2045
2046         spin_unlock_irqrestore(&cam->flist_lock, lock_flags);
2047
2048         DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f)
2049 }
2050
2051
2052 /*--------------------------------------------------------------------------
2053   Read, store and remove the first pointer in the FIFO list of requested
2054   frames. This function is called in interrupt context.
2055   --------------------------------------------------------------------------*/
2056 static void
2057 w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep)
2058 {
2059         u8 i;
2060
2061         spin_lock(&cam->flist_lock);
2062
2063         *framep = cam->requested_frame[0];
2064
2065         /* Shift the list of pointers */
2066         for (i = 0; i < cam->nbuffers-1; i++)
2067                 cam->requested_frame[i] = cam->requested_frame[i+1];
2068         cam->requested_frame[i] = NULL;
2069
2070         spin_unlock(&cam->flist_lock);
2071
2072         DBG(6,"Popped frame #%d from the list", (*framep)->number)
2073 }
2074
2075
2076 /*--------------------------------------------------------------------------
2077   High-level video post-processing routine on grabbed frames.
2078   Return 0 on success, a negative number otherwise.
2079   --------------------------------------------------------------------------*/
2080 static int
2081 w9968cf_postprocess_frame(struct w9968cf_device* cam,
2082                           struct w9968cf_frame_t* fr)
2083 {
2084         void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp;
2085         u16 w = cam->window.width,
2086             h = cam->window.height,
2087             d = cam->picture.depth,
2088             fmt = cam->picture.palette,
2089             rgb = cam->force_rgb,
2090             hw_w = cam->hw_width,
2091             hw_h = cam->hw_height,
2092             hw_d = cam->hw_depth;
2093         int err = 0;
2094
2095         #define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;}
2096
2097         if (cam->vpp_flag & VPP_DECOMPRESSION) {
2098                 memcpy(pOut, pIn, fr->length);
2099                 _PSWAP(pIn, pOut)
2100                 err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut);
2101                 PDBGG("Compressed frame length: %lu",(unsigned long)fr->length)
2102                 fr->length = (hw_w*hw_h*hw_d)/8;
2103                 _PSWAP(pIn, pOut)
2104                 if (err) {
2105                         DBG(4, "An error occurred while decoding the frame: "
2106                                "%s", symbolic(decoder_errlist, err))
2107                         return err;
2108                 } else
2109                         DBG(6, "Frame decoded")
2110         }
2111
2112         if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) {
2113                 w9968cf_vpp->swap_yuvbytes(pIn, fr->length);
2114                 DBG(6, "Original UYVY component ordering changed")
2115         }
2116
2117         if (cam->vpp_flag & VPP_UPSCALE) {
2118                 w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h);
2119                 fr->length = (w*h*hw_d)/8;
2120                 _PSWAP(pIn, pOut)
2121                 DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u",
2122                     hw_w, hw_h, hw_d, w, h)
2123         }
2124
2125         if (cam->vpp_flag & VPP_UYVY_TO_RGBX) {
2126                 w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb);
2127                 fr->length = (w*h*d)/8;
2128                 _PSWAP(pIn, pOut)
2129                 DBG(6, "UYVY-16bit to %s conversion done",
2130                     symbolic(v4l1_plist, fmt))
2131         }
2132
2133         if (pOut == fr->buffer)
2134                 memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length);
2135
2136         return 0;
2137 }
2138
2139
2140
2141 /****************************************************************************
2142  * Image sensor control routines                                            *
2143  ****************************************************************************/
2144
2145 static int
2146 w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val)
2147 {
2148         struct ovcamchip_control ctl;
2149         int err;
2150
2151         ctl.id = cid;
2152         ctl.value = val;
2153
2154         err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl);
2155
2156         return err;
2157 }
2158
2159
2160 static int
2161 w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val)
2162 {
2163         struct ovcamchip_control ctl;
2164         int err;
2165
2166         ctl.id = cid;
2167
2168         err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl);
2169         if (!err)
2170                 *val = ctl.value;
2171
2172         return err;
2173 }
2174
2175
2176 static int
2177 w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg)
2178 {
2179         struct i2c_client* c = cam->sensor_client;
2180         int rc = 0;
2181
2182         if (!c || !c->driver || !c->driver->command)
2183                 return -EINVAL;
2184
2185         rc = c->driver->command(c, cmd, arg);
2186         /* The I2C driver returns -EPERM on non-supported controls */
2187         return (rc < 0 && rc != -EPERM) ? rc : 0;
2188 }
2189
2190
2191 /*--------------------------------------------------------------------------
2192   Update some settings of the image sensor.
2193   Returns: 0 on success, a negative number otherwise.
2194   --------------------------------------------------------------------------*/
2195 static int w9968cf_sensor_update_settings(struct w9968cf_device* cam)
2196 {
2197         int err = 0;
2198
2199         /* Auto brightness */
2200         err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT,
2201                                          cam->auto_brt);
2202         if (err)
2203                 return err;
2204
2205         /* Auto exposure */
2206         err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP,
2207                                          cam->auto_exp);
2208         if (err)
2209                 return err;
2210
2211         /* Banding filter */
2212         err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT,
2213                                          cam->bandfilt);
2214         if (err)
2215                 return err;
2216
2217         /* Light frequency */
2218         err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ,
2219                                          cam->lightfreq);
2220         if (err)
2221                 return err;
2222
2223         /* Back light */
2224         err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT,
2225                                          cam->backlight);
2226         if (err)
2227                 return err;
2228
2229         /* Mirror */
2230         err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR,
2231                                          cam->mirror);
2232         if (err)
2233                 return err;
2234
2235         return 0;
2236 }
2237
2238
2239 /*--------------------------------------------------------------------------
2240   Get some current picture settings from the image sensor and update the
2241   internal 'picture' structure of the camera.
2242   Returns: 0 on success, a negative number otherwise.
2243   --------------------------------------------------------------------------*/
2244 static int w9968cf_sensor_get_picture(struct w9968cf_device* cam)
2245 {
2246         int err, v;
2247
2248         err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v);
2249         if (err)
2250                 return err;
2251         cam->picture.contrast = v;
2252
2253         err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v);
2254         if (err)
2255                 return err;
2256         cam->picture.brightness = v;
2257
2258         err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v);
2259         if (err)
2260                 return err;
2261         cam->picture.colour = v;
2262
2263         err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v);
2264         if (err)
2265                 return err;
2266         cam->picture.hue = v;
2267
2268         DBG(5, "Got picture settings from the image sensor")
2269
2270         PDBGG("Brightness, contrast, hue, colour, whiteness are "
2271               "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast,
2272               cam->picture.hue, cam->picture.colour, cam->picture.whiteness)
2273
2274         return 0;
2275 }
2276
2277
2278 /*--------------------------------------------------------------------------
2279   Update picture settings of the image sensor.
2280   Returns: 0 on success, a negative number otherwise.
2281   --------------------------------------------------------------------------*/
2282 static int
2283 w9968cf_sensor_update_picture(struct w9968cf_device* cam,
2284                               struct video_picture pict)
2285 {
2286         int err = 0;
2287
2288         if ((!cam->sensor_initialized)
2289             || pict.contrast != cam->picture.contrast) {
2290                 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT,
2291                                                  pict.contrast);
2292                 if (err)
2293                         goto fail;
2294                 DBG(4, "Contrast changed from %u to %u",
2295                     cam->picture.contrast, pict.contrast)
2296                 cam->picture.contrast = pict.contrast;
2297         }
2298
2299         if (((!cam->sensor_initialized) ||
2300             pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) {
2301                 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT,
2302                                                  pict.brightness);
2303                 if (err)
2304                         goto fail;
2305                 DBG(4, "Brightness changed from %u to %u",
2306                     cam->picture.brightness, pict.brightness)
2307                 cam->picture.brightness = pict.brightness;
2308         }
2309
2310         if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) {
2311                 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT,
2312                                                  pict.colour);
2313                 if (err)
2314                         goto fail;
2315                 DBG(4, "Colour changed from %u to %u",
2316                     cam->picture.colour, pict.colour)
2317                 cam->picture.colour = pict.colour;
2318         }
2319
2320         if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) {
2321                 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE,
2322                                                  pict.hue);
2323                 if (err)
2324                         goto fail;
2325                 DBG(4, "Hue changed from %u to %u",
2326                     cam->picture.hue, pict.hue)
2327                 cam->picture.hue = pict.hue;
2328         }
2329
2330         return 0;
2331
2332 fail:
2333         DBG(4, "Failed to change sensor picture setting")
2334         return err;
2335 }
2336
2337
2338
2339 /****************************************************************************
2340  * Camera configuration                                                     *
2341  ****************************************************************************/
2342
2343 /*--------------------------------------------------------------------------
2344   This function is called when a supported image sensor is detected.
2345   Return 0 if the initialization succeeds, a negative number otherwise.
2346   --------------------------------------------------------------------------*/
2347 static int w9968cf_sensor_init(struct w9968cf_device* cam)
2348 {
2349         int err = 0;
2350
2351         if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE,
2352                                       &cam->monochrome)))
2353                 goto error;
2354
2355         if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE,
2356                                       &cam->sensor)))
2357                 goto error;
2358
2359         /* NOTE: Make sure width and height are a multiple of 16 */
2360         switch (cam->sensor_client->addr) {
2361                 case OV6xx0_SID:
2362                         cam->maxwidth = 352;
2363                         cam->maxheight = 288;
2364                         cam->minwidth = 64;
2365                         cam->minheight = 48;
2366                         break;
2367                 case OV7xx0_SID:
2368                         cam->maxwidth = 640;
2369                         cam->maxheight = 480;
2370                         cam->minwidth = 64;
2371                         cam->minheight = 48;
2372                         break;
2373                 default:
2374                         DBG(1, "Not supported image sensor detected for %s",
2375                             symbolic(camlist, cam->id))
2376                         return -EINVAL;
2377         }
2378
2379         /* These values depend on the ones in the ovxxx0.c sources */
2380         switch (cam->sensor) {
2381                 case CC_OV7620:
2382                         cam->start_cropx = 287;
2383                         cam->start_cropy = 35;
2384                         /* Seems to work around a bug in the image sensor */
2385                         cam->vs_polarity = 1;
2386                         cam->hs_polarity = 1;
2387                         break;
2388                 default:
2389                         cam->start_cropx = 320;
2390                         cam->start_cropy = 35;
2391                         cam->vs_polarity = 1;
2392                         cam->hs_polarity = 0;
2393         }
2394
2395         if ((err = w9968cf_sensor_update_settings(cam)))
2396                 goto error;
2397
2398         if ((err = w9968cf_sensor_update_picture(cam, cam->picture)))
2399                 goto error;
2400
2401         cam->sensor_initialized = 1;
2402
2403         DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor))
2404         return 0;
2405
2406 error:
2407         cam->sensor_initialized = 0;
2408         cam->sensor = CC_UNKNOWN;
2409         DBG(1, "Image sensor initialization failed for %s (/dev/video%d). "
2410                "Try to detach and attach this device again",
2411             symbolic(camlist, cam->id), cam->v4ldev->minor)
2412         return err;
2413 }
2414
2415
2416 /*--------------------------------------------------------------------------
2417   Fill some basic fields in the main device data structure.
2418   This function is called once on w9968cf_usb_probe() for each recognized
2419   camera.
2420   --------------------------------------------------------------------------*/
2421 static void
2422 w9968cf_configure_camera(struct w9968cf_device* cam,
2423                          struct usb_device* udev,
2424                          enum w9968cf_model_id mod_id,
2425                          const unsigned short dev_nr)
2426 {
2427         mutex_init(&cam->fileop_mutex);
2428         init_waitqueue_head(&cam->open);
2429         spin_lock_init(&cam->urb_lock);
2430         spin_lock_init(&cam->flist_lock);
2431
2432         cam->users = 0;
2433         cam->disconnected = 0;
2434         cam->id = mod_id;
2435         cam->sensor = CC_UNKNOWN;
2436         cam->sensor_initialized = 0;
2437
2438         /* Calculate the alternate setting number (from 1 to 16)
2439            according to the 'packet_size' module parameter */
2440         if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE)
2441                 packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE;
2442         for (cam->altsetting = 1;
2443              packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1];
2444              cam->altsetting++);
2445
2446         cam->max_buffers = (max_buffers[dev_nr] < 2 ||
2447                             max_buffers[dev_nr] > W9968CF_MAX_BUFFERS)
2448                            ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr];
2449
2450         cam->double_buffer = (double_buffer[dev_nr] == 0 ||
2451                               double_buffer[dev_nr] == 1)
2452                              ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER;
2453
2454         cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1)
2455                         ? (u8)clamping[dev_nr] : W9968CF_CLAMPING;
2456
2457         cam->filter_type = (filter_type[dev_nr] == 0 ||
2458                             filter_type[dev_nr] == 1 ||
2459                             filter_type[dev_nr] == 2)
2460                            ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE;
2461
2462         cam->capture = 1;
2463
2464         cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1)
2465                          ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW;
2466
2467         cam->decompression = (decompression[dev_nr] == 0 ||
2468                               decompression[dev_nr] == 1 ||
2469                               decompression[dev_nr] == 2)
2470                              ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION;
2471
2472         cam->upscaling = (upscaling[dev_nr] == 0 ||
2473                           upscaling[dev_nr] == 1)
2474                          ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING;
2475
2476         cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1)
2477                         ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT;
2478
2479         cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1)
2480                         ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP;
2481
2482         cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60)
2483                          ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ;
2484
2485         cam->bandfilt = (bandingfilter[dev_nr] == 0 ||
2486                          bandingfilter[dev_nr] == 1)
2487                         ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER;
2488
2489         cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1)
2490                          ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT;
2491
2492         cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0)
2493                         ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV;
2494
2495         cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1)
2496                       ? (u8)mirror[dev_nr] : W9968CF_MIRROR;
2497
2498         cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1)
2499                           ? monochrome[dev_nr] : W9968CF_MONOCHROME;
2500
2501         cam->picture.brightness = (u16)brightness[dev_nr];
2502         cam->picture.hue = (u16)hue[dev_nr];
2503         cam->picture.colour = (u16)colour[dev_nr];
2504         cam->picture.contrast = (u16)contrast[dev_nr];
2505         cam->picture.whiteness = (u16)whiteness[dev_nr];
2506         if (w9968cf_valid_palette((u16)force_palette[dev_nr])) {
2507                 cam->picture.palette = (u16)force_palette[dev_nr];
2508                 cam->force_palette = 1;
2509         } else {
2510                 cam->force_palette = 0;
2511                 if (cam->decompression == 0)
2512                         cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF;
2513                 else if (cam->decompression == 1)
2514                         cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE;
2515                 else
2516                         cam->picture.palette = W9968CF_PALETTE_DECOMP_ON;
2517         }
2518         cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
2519
2520         cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1)
2521                          ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB;
2522
2523         cam->window.x = 0;
2524         cam->window.y = 0;
2525         cam->window.width = W9968CF_WIDTH;
2526         cam->window.height = W9968CF_HEIGHT;
2527         cam->window.chromakey = 0;
2528         cam->window.clipcount = 0;
2529         cam->window.flags = 0;
2530
2531         DBG(3, "%s configured with settings #%u:",
2532             symbolic(camlist, cam->id), dev_nr)
2533
2534         DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes",
2535             wMaxPacketSize[cam->altsetting-1])
2536
2537         DBG(3, "- Number of requested video frame buffers: %u",
2538             cam->max_buffers)
2539
2540         if (cam->double_buffer)
2541                 DBG(3, "- Hardware double buffering enabled")
2542         else
2543                 DBG(3, "- Hardware double buffering disabled")
2544
2545         if (cam->filter_type == 0)
2546                 DBG(3, "- Video filtering disabled")
2547         else if (cam->filter_type == 1)
2548                 DBG(3, "- Video filtering enabled: type 1-2-1")
2549         else if (cam->filter_type == 2)
2550                 DBG(3, "- Video filtering enabled: type 2-3-6-3-2")
2551
2552         if (cam->clamping)
2553                 DBG(3, "- Video data clamping (CCIR-601 format) enabled")
2554         else
2555                 DBG(3, "- Video data clamping (CCIR-601 format) disabled")
2556
2557         if (cam->largeview)
2558                 DBG(3, "- Large view enabled")
2559         else
2560                 DBG(3, "- Large view disabled")
2561
2562         if ((cam->decompression) == 0 && (!cam->force_palette))
2563                 DBG(3, "- Decompression disabled")
2564         else if ((cam->decompression) == 1 && (!cam->force_palette))
2565                 DBG(3, "- Decompression forced")
2566         else if ((cam->decompression) == 2 && (!cam->force_palette))
2567                 DBG(3, "- Decompression allowed")
2568
2569         if (cam->upscaling)
2570                 DBG(3, "- Software image scaling enabled")
2571         else
2572                 DBG(3, "- Software image scaling disabled")
2573
2574         if (cam->force_palette)
2575                 DBG(3, "- Image palette forced to %s",
2576                     symbolic(v4l1_plist, cam->picture.palette))
2577
2578         if (cam->force_rgb)
2579                 DBG(3, "- RGB component ordering will be used instead of BGR")
2580
2581         if (cam->auto_brt)
2582                 DBG(3, "- Auto brightness enabled")
2583         else
2584                 DBG(3, "- Auto brightness disabled")
2585
2586         if (cam->auto_exp)
2587                 DBG(3, "- Auto exposure enabled")
2588         else
2589                 DBG(3, "- Auto exposure disabled")
2590
2591         if (cam->backlight)
2592                 DBG(3, "- Backlight exposure algorithm enabled")
2593         else
2594                 DBG(3, "- Backlight exposure algorithm disabled")
2595
2596         if (cam->mirror)
2597                 DBG(3, "- Mirror enabled")
2598         else
2599                 DBG(3, "- Mirror disabled")
2600
2601         if (cam->bandfilt)
2602                 DBG(3, "- Banding filter enabled")
2603         else
2604                 DBG(3, "- Banding filter disabled")
2605
2606         DBG(3, "- Power lighting frequency: %u", cam->lightfreq)
2607
2608         if (cam->clockdiv == -1)
2609                 DBG(3, "- Automatic clock divisor enabled")
2610         else
2611                 DBG(3, "- Clock divisor: %d", cam->clockdiv)
2612
2613         if (cam->monochrome)
2614                 DBG(3, "- Image sensor used as monochrome")
2615         else
2616                 DBG(3, "- Image sensor not used as monochrome")
2617 }
2618
2619
2620 /*--------------------------------------------------------------------------
2621   If the video post-processing module is not loaded, some parameters
2622   must be overridden.
2623   --------------------------------------------------------------------------*/
2624 static void w9968cf_adjust_configuration(struct w9968cf_device* cam)
2625 {
2626         if (!w9968cf_vpp) {
2627                 if (cam->decompression == 1) {
2628                         cam->decompression = 2;
2629                         DBG(2, "Video post-processing module not found: "
2630                                "'decompression' parameter forced to 2")
2631                 }
2632                 if (cam->upscaling) {
2633                         cam->upscaling = 0;
2634                         DBG(2, "Video post-processing module not found: "
2635                                "'upscaling' parameter forced to 0")
2636                 }
2637                 if (cam->picture.palette != VIDEO_PALETTE_UYVY) {
2638                         cam->force_palette = 0;
2639                         DBG(2, "Video post-processing module not found: "
2640                                "'force_palette' parameter forced to 0")
2641                 }
2642                 cam->picture.palette = VIDEO_PALETTE_UYVY;
2643                 cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
2644         }
2645 }
2646
2647
2648 /*--------------------------------------------------------------------------
2649   Release the resources used by the driver.
2650   This function is called on disconnect
2651   (or on close if deallocation has been deferred)
2652   --------------------------------------------------------------------------*/
2653 static void w9968cf_release_resources(struct w9968cf_device* cam)
2654 {
2655         mutex_lock(&w9968cf_devlist_mutex);
2656
2657         DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor)
2658
2659         video_unregister_device(cam->v4ldev);
2660         list_del(&cam->v4llist);
2661         i2c_del_adapter(&cam->i2c_adapter);
2662         w9968cf_deallocate_memory(cam);
2663         kfree(cam->control_buffer);
2664         kfree(cam->data_buffer);
2665
2666         mutex_unlock(&w9968cf_devlist_mutex);
2667 }
2668
2669
2670
2671 /****************************************************************************
2672  * Video4Linux interface                                                    *
2673  ****************************************************************************/
2674
2675 static int w9968cf_open(struct inode* inode, struct file* filp)
2676 {
2677         struct w9968cf_device* cam;
2678         int err;
2679
2680         /* This the only safe way to prevent race conditions with disconnect */
2681         if (!down_read_trylock(&w9968cf_disconnect))
2682                 return -ERESTARTSYS;
2683
2684         cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2685
2686         mutex_lock(&cam->dev_mutex);
2687
2688         if (cam->sensor == CC_UNKNOWN) {
2689                 DBG(2, "No supported image sensor has been detected by the "
2690                        "'ovcamchip' module for the %s (/dev/video%d). Make "
2691                        "sure it is loaded *before* (re)connecting the camera.",
2692                     symbolic(camlist, cam->id), cam->v4ldev->minor)
2693                 mutex_unlock(&cam->dev_mutex);
2694                 up_read(&w9968cf_disconnect);
2695                 return -ENODEV;
2696         }
2697
2698         if (cam->users) {
2699                 DBG(2, "%s (/dev/video%d) has been already occupied by '%s'",
2700                     symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command)
2701                 if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
2702                         mutex_unlock(&cam->dev_mutex);
2703                         up_read(&w9968cf_disconnect);
2704                         return -EWOULDBLOCK;
2705                 }
2706                 mutex_unlock(&cam->dev_mutex);
2707                 err = wait_event_interruptible_exclusive(cam->open,
2708                                                          cam->disconnected ||
2709                                                          !cam->users);
2710                 if (err) {
2711                         up_read(&w9968cf_disconnect);
2712                         return err;
2713                 }
2714                 if (cam->disconnected) {
2715                         up_read(&w9968cf_disconnect);
2716                         return -ENODEV;
2717                 }
2718                 mutex_lock(&cam->dev_mutex);
2719         }
2720
2721         DBG(5, "Opening '%s', /dev/video%d ...",
2722             symbolic(camlist, cam->id), cam->v4ldev->minor)
2723
2724         cam->streaming = 0;
2725         cam->misconfigured = 0;
2726
2727         w9968cf_adjust_configuration(cam);
2728
2729         if ((err = w9968cf_allocate_memory(cam)))
2730                 goto deallocate_memory;
2731
2732         if ((err = w9968cf_init_chip(cam)))
2733                 goto deallocate_memory;
2734
2735         if ((err = w9968cf_start_transfer(cam)))
2736                 goto deallocate_memory;
2737
2738         filp->private_data = cam;
2739
2740         cam->users++;
2741         strcpy(cam->command, current->comm);
2742
2743         init_waitqueue_head(&cam->wait_queue);
2744
2745         DBG(5, "Video device is open")
2746
2747         mutex_unlock(&cam->dev_mutex);
2748         up_read(&w9968cf_disconnect);
2749
2750         return 0;
2751
2752 deallocate_memory:
2753         w9968cf_deallocate_memory(cam);
2754         DBG(2, "Failed to open the video device")
2755         mutex_unlock(&cam->dev_mutex);
2756         up_read(&w9968cf_disconnect);
2757         return err;
2758 }
2759
2760
2761 static int w9968cf_release(struct inode* inode, struct file* filp)
2762 {
2763         struct w9968cf_device* cam;
2764
2765         cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2766
2767         mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
2768
2769         w9968cf_stop_transfer(cam);
2770
2771         if (cam->disconnected) {
2772                 w9968cf_release_resources(cam);
2773                 mutex_unlock(&cam->dev_mutex);
2774                 kfree(cam);
2775                 return 0;
2776         }
2777
2778         cam->users--;
2779         w9968cf_deallocate_memory(cam);
2780         wake_up_interruptible_nr(&cam->open, 1);
2781
2782         DBG(5, "Video device closed")
2783         mutex_unlock(&cam->dev_mutex);
2784         return 0;
2785 }
2786
2787
2788 static ssize_t
2789 w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
2790 {
2791         struct w9968cf_device* cam;
2792         struct w9968cf_frame_t* fr;
2793         int err = 0;
2794
2795         cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2796
2797         if (filp->f_flags & O_NONBLOCK)
2798                 return -EWOULDBLOCK;
2799
2800         if (mutex_lock_interruptible(&cam->fileop_mutex))
2801                 return -ERESTARTSYS;
2802
2803         if (cam->disconnected) {
2804                 DBG(2, "Device not present")
2805                 mutex_unlock(&cam->fileop_mutex);
2806                 return -ENODEV;
2807         }
2808
2809         if (cam->misconfigured) {
2810                 DBG(2, "The camera is misconfigured. Close and open it again.")
2811                 mutex_unlock(&cam->fileop_mutex);
2812                 return -EIO;
2813         }
2814
2815         if (!cam->frame[0].queued)
2816                 w9968cf_push_frame(cam, 0);
2817
2818         if (!cam->frame[1].queued)
2819                 w9968cf_push_frame(cam, 1);
2820
2821         err = wait_event_interruptible(cam->wait_queue,
2822                                        cam->frame[0].status == F_READY ||
2823                                        cam->frame[1].status == F_READY ||
2824                                        cam->disconnected);
2825         if (err) {
2826                 mutex_unlock(&cam->fileop_mutex);
2827                 return err;
2828         }
2829         if (cam->disconnected) {
2830                 mutex_unlock(&cam->fileop_mutex);
2831                 return -ENODEV;
2832         }
2833
2834         fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1];
2835
2836         if (w9968cf_vpp)
2837                 w9968cf_postprocess_frame(cam, fr);
2838
2839         if (count > fr->length)
2840                 count = fr->length;
2841
2842         if (copy_to_user(buf, fr->buffer, count)) {
2843                 fr->status = F_UNUSED;
2844                 mutex_unlock(&cam->fileop_mutex);
2845                 return -EFAULT;
2846         }
2847         *f_pos += count;
2848
2849         fr->status = F_UNUSED;
2850
2851         DBG(5, "%zu bytes read", count)
2852
2853         mutex_unlock(&cam->fileop_mutex);
2854         return count;
2855 }
2856
2857
2858 static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma)
2859 {
2860         struct w9968cf_device* cam = (struct w9968cf_device*)
2861                                      video_get_drvdata(video_devdata(filp));
2862         unsigned long vsize = vma->vm_end - vma->vm_start,
2863                       psize = cam->nbuffers * cam->frame[0].size,
2864                       start = vma->vm_start,
2865                       pos = (unsigned long)cam->frame[0].buffer,
2866                       page;
2867
2868         if (cam->disconnected) {
2869                 DBG(2, "Device not present")
2870                 return -ENODEV;
2871         }
2872
2873         if (cam->misconfigured) {
2874                 DBG(2, "The camera is misconfigured. Close and open it again")
2875                 return -EIO;
2876         }
2877
2878         PDBGG("mmapping %lu bytes...", vsize)
2879
2880         if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT))
2881                 return -EINVAL;
2882
2883         while (vsize > 0) {
2884                 page = vmalloc_to_pfn((void *)pos);
2885                 if (remap_pfn_range(vma, start, page + vma->vm_pgoff,
2886                                                 PAGE_SIZE, vma->vm_page_prot))
2887                         return -EAGAIN;
2888                 start += PAGE_SIZE;
2889                 pos += PAGE_SIZE;
2890                 vsize -= PAGE_SIZE;
2891         }
2892
2893         DBG(5, "mmap method successfully called")
2894         return 0;
2895 }
2896
2897
2898 static int
2899 w9968cf_ioctl(struct inode* inode, struct file* filp,
2900               unsigned int cmd, unsigned long arg)
2901 {
2902         struct w9968cf_device* cam;
2903         int err;
2904
2905         cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2906
2907         if (mutex_lock_interruptible(&cam->fileop_mutex))
2908                 return -ERESTARTSYS;
2909
2910         if (cam->disconnected) {
2911                 DBG(2, "Device not present")
2912                 mutex_unlock(&cam->fileop_mutex);
2913                 return -ENODEV;
2914         }
2915
2916         if (cam->misconfigured) {
2917                 DBG(2, "The camera is misconfigured. Close and open it again.")
2918                 mutex_unlock(&cam->fileop_mutex);
2919                 return -EIO;
2920         }
2921
2922         err = w9968cf_v4l_ioctl(inode, filp, cmd, (void __user *)arg);
2923
2924         mutex_unlock(&cam->fileop_mutex);
2925         return err;
2926 }
2927
2928
2929 static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp,
2930                              unsigned int cmd, void __user * arg)
2931 {
2932         struct w9968cf_device* cam;
2933         const char* v4l1_ioctls[] = {
2934                 "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER",
2935                 "GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF",
2936                 "SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO",
2937                 "SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE",
2938                 "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE",
2939                 "GVBIFMT", "SVBIFMT"
2940         };
2941
2942         #define V4L1_IOCTL(cmd) \
2943                 ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \
2944                 v4l1_ioctls[_IOC_NR((cmd))] : "?")
2945
2946         cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2947
2948         switch (cmd) {
2949
2950         case VIDIOCGCAP: /* get video capability */
2951         {
2952                 struct video_capability cap = {
2953                         .type = VID_TYPE_CAPTURE | VID_TYPE_SCALES,
2954                         .channels = 1,
2955                         .audios = 0,
2956                         .minwidth = cam->minwidth,
2957                         .minheight = cam->minheight,
2958                 };
2959                 sprintf(cap.name, "W996[87]CF USB Camera #%d",
2960                         cam->v4ldev->minor);
2961                 cap.maxwidth = (cam->upscaling && w9968cf_vpp)
2962                                ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
2963                                  : cam->maxwidth;
2964                 cap.maxheight = (cam->upscaling && w9968cf_vpp)
2965                                 ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
2966                                   : cam->maxheight;
2967
2968                 if (copy_to_user(arg, &cap, sizeof(cap)))
2969                         return -EFAULT;
2970
2971                 DBG(5, "VIDIOCGCAP successfully called")
2972                 return 0;
2973         }
2974
2975         case VIDIOCGCHAN: /* get video channel informations */
2976         {
2977                 struct video_channel chan;
2978                 if (copy_from_user(&chan, arg, sizeof(chan)))
2979                         return -EFAULT;
2980
2981                 if (chan.channel != 0)
2982                         return -EINVAL;
2983
2984                 strcpy(chan.name, "Camera");
2985                 chan.tuners = 0;
2986                 chan.flags = 0;
2987                 chan.type = VIDEO_TYPE_CAMERA;
2988                 chan.norm = VIDEO_MODE_AUTO;
2989
2990                 if (copy_to_user(arg, &chan, sizeof(chan)))
2991                         return -EFAULT;
2992
2993                 DBG(5, "VIDIOCGCHAN successfully called")
2994                 return 0;
2995         }
2996
2997         case VIDIOCSCHAN: /* set active channel */
2998         {
2999                 struct video_channel chan;
3000
3001                 if (copy_from_user(&chan, arg, sizeof(chan)))
3002                         return -EFAULT;
3003
3004                 if (chan.channel != 0)
3005                         return -EINVAL;
3006
3007                 DBG(5, "VIDIOCSCHAN successfully called")
3008                 return 0;
3009         }
3010
3011         case VIDIOCGPICT: /* get image properties of the picture */
3012         {
3013                 if (w9968cf_sensor_get_picture(cam))
3014                         return -EIO;
3015
3016                 if (copy_to_user(arg, &cam->picture, sizeof(cam->picture)))
3017                         return -EFAULT;
3018
3019                 DBG(5, "VIDIOCGPICT successfully called")
3020                 return 0;
3021         }
3022
3023         case VIDIOCSPICT: /* change picture settings */
3024         {
3025                 struct video_picture pict;
3026                 int err = 0;
3027
3028                 if (copy_from_user(&pict, arg, sizeof(pict)))
3029                         return -EFAULT;
3030
3031                 if ( (cam->force_palette || !w9968cf_vpp)
3032                      && pict.palette != cam->picture.palette ) {
3033                         DBG(4, "Palette %s rejected: only %s is allowed",
3034                             symbolic(v4l1_plist, pict.palette),
3035                             symbolic(v4l1_plist, cam->picture.palette))
3036                         return -EINVAL;
3037                 }
3038
3039                 if (!w9968cf_valid_palette(pict.palette)) {
3040                         DBG(4, "Palette %s not supported. VIDIOCSPICT failed",
3041                             symbolic(v4l1_plist, pict.palette))
3042                         return -EINVAL;
3043                 }
3044
3045                 if (!cam->force_palette) {
3046                    if (cam->decompression == 0) {
3047                       if (w9968cf_need_decompression(pict.palette)) {
3048                          DBG(4, "Decompression disabled: palette %s is not "
3049                                 "allowed. VIDIOCSPICT failed",
3050                              symbolic(v4l1_plist, pict.palette))
3051                          return -EINVAL;
3052                       }
3053                    } else if (cam->decompression == 1) {
3054                       if (!w9968cf_need_decompression(pict.palette)) {
3055                          DBG(4, "Decompression forced: palette %s is not "
3056                                 "allowed. VIDIOCSPICT failed",
3057                              symbolic(v4l1_plist, pict.palette))
3058                          return -EINVAL;
3059                       }
3060                    }
3061                 }
3062
3063                 if (pict.depth != w9968cf_valid_depth(pict.palette)) {
3064                         DBG(4, "Requested depth %u bpp is not valid for %s "
3065                                "palette: ignored and changed to %u bpp",
3066                             pict.depth, symbolic(v4l1_plist, pict.palette),
3067                             w9968cf_valid_depth(pict.palette))
3068                         pict.depth = w9968cf_valid_depth(pict.palette);
3069                 }
3070
3071                 if (pict.palette != cam->picture.palette) {
3072                         if(*cam->requested_frame
3073                            || cam->frame_current->queued) {
3074                                 err = wait_event_interruptible
3075                                       ( cam->wait_queue,
3076                                         cam->disconnected ||
3077                                         (!*cam->requested_frame &&
3078                                          !cam->frame_current->queued) );
3079                                 if (err)
3080                                         return err;
3081                                 if (cam->disconnected)
3082                                         return -ENODEV;
3083                         }
3084
3085                         if (w9968cf_stop_transfer(cam))
3086                                 goto ioctl_fail;
3087
3088                         if (w9968cf_set_picture(cam, pict))
3089                                 goto ioctl_fail;
3090
3091                         if (w9968cf_start_transfer(cam))
3092                                 goto ioctl_fail;
3093
3094                 } else if (w9968cf_sensor_update_picture(cam, pict))
3095                         return -EIO;
3096
3097
3098                 DBG(5, "VIDIOCSPICT successfully called")
3099                 return 0;
3100         }
3101
3102         case VIDIOCSWIN: /* set capture area */
3103         {
3104                 struct video_window win;
3105                 int err = 0;
3106
3107                 if (copy_from_user(&win, arg, sizeof(win)))
3108                         return -EFAULT;
3109
3110                 DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, "
3111                        "x=%u, y=%u, %ux%u", win.clipcount, win.flags,
3112                     win.x, win.y, win.width, win.height)
3113
3114                 if (win.clipcount != 0 || win.flags != 0)
3115                         return -EINVAL;
3116
3117                 if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
3118                                                       (u16*)&win.height))) {
3119                         DBG(4, "Resolution not supported (%ux%u). "
3120                                "VIDIOCSWIN failed", win.width, win.height)
3121                         return err;
3122                 }
3123
3124                 if (win.x != cam->window.x ||
3125                     win.y != cam->window.y ||
3126                     win.width != cam->window.width ||
3127                     win.height != cam->window.height) {
3128                         if(*cam->requested_frame
3129                            || cam->frame_current->queued) {
3130                                 err = wait_event_interruptible
3131                                       ( cam->wait_queue,
3132                                         cam->disconnected ||
3133                                         (!*cam->requested_frame &&
3134                                          !cam->frame_current->queued) );
3135                                 if (err)
3136                                         return err;
3137                                 if (cam->disconnected)
3138                                         return -ENODEV;
3139                         }
3140
3141                         if (w9968cf_stop_transfer(cam))
3142                                 goto ioctl_fail;
3143
3144                         /* This _must_ be called before set_window() */
3145                         if (w9968cf_set_picture(cam, cam->picture))
3146                                 goto ioctl_fail;
3147
3148                         if (w9968cf_set_window(cam, win))
3149                                 goto ioctl_fail;
3150
3151                         if (w9968cf_start_transfer(cam))
3152                                 goto ioctl_fail;
3153                 }
3154
3155                 DBG(5, "VIDIOCSWIN successfully called. ")
3156                 return 0;
3157         }
3158
3159         case VIDIOCGWIN: /* get current window properties */
3160         {
3161                 if (copy_to_user(arg,&cam->window,sizeof(struct video_window)))
3162                         return -EFAULT;
3163
3164                 DBG(5, "VIDIOCGWIN successfully called")
3165                 return 0;
3166         }
3167
3168         case VIDIOCGMBUF: /* request for memory (mapped) buffer */
3169         {
3170                 struct video_mbuf mbuf;
3171                 u8 i;
3172
3173                 mbuf.size = cam->nbuffers * cam->frame[0].size;
3174                 mbuf.frames = cam->nbuffers;
3175                 for (i = 0; i < cam->nbuffers; i++)
3176                         mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer -
3177                                           (unsigned long)cam->frame[0].buffer;
3178
3179                 if (copy_to_user(arg, &mbuf, sizeof(mbuf)))
3180                         return -EFAULT;
3181
3182                 DBG(5, "VIDIOCGMBUF successfully called")
3183                 return 0;
3184         }
3185
3186         case VIDIOCMCAPTURE: /* start the capture to a frame */
3187         {
3188                 struct video_mmap mmap;
3189                 struct w9968cf_frame_t* fr;
3190                 int err = 0;
3191
3192                 if (copy_from_user(&mmap, arg, sizeof(mmap)))
3193                         return -EFAULT;
3194
3195                 DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d",
3196                     mmap.frame, symbolic(v4l1_plist, mmap.format),
3197                     mmap.width, mmap.height)
3198
3199                 if (mmap.frame >= cam->nbuffers) {
3200                         DBG(4, "Invalid frame number (%u). "
3201                                "VIDIOCMCAPTURE failed", mmap.frame)
3202                         return -EINVAL;
3203                 }
3204
3205                 if (mmap.format!=cam->picture.palette &&
3206                     (cam->force_palette || !w9968cf_vpp)) {
3207                         DBG(4, "Palette %s rejected: only %s is allowed",
3208                             symbolic(v4l1_plist, mmap.format),
3209                             symbolic(v4l1_plist, cam->picture.palette))
3210                         return -EINVAL;
3211                 }
3212
3213                 if (!w9968cf_valid_palette(mmap.format)) {
3214                         DBG(4, "Palette %s not supported. "
3215                                "VIDIOCMCAPTURE failed",
3216                             symbolic(v4l1_plist, mmap.format))
3217                         return -EINVAL;
3218                 }
3219
3220                 if (!cam->force_palette) {
3221                    if (cam->decompression == 0) {
3222                       if (w9968cf_need_decompression(mmap.format)) {
3223                          DBG(4, "Decompression disabled: palette %s is not "
3224                                 "allowed. VIDIOCSPICT failed",
3225                              symbolic(v4l1_plist, mmap.format))
3226                          return -EINVAL;
3227                       }
3228                    } else if (cam->decompression == 1) {
3229                       if (!w9968cf_need_decompression(mmap.format)) {
3230                          DBG(4, "Decompression forced: palette %s is not "
3231                                 "allowed. VIDIOCSPICT failed",
3232                              symbolic(v4l1_plist, mmap.format))
3233                          return -EINVAL;
3234                       }
3235                    }
3236                 }
3237
3238                 if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
3239                                                       (u16*)&mmap.height))) {
3240                         DBG(4, "Resolution not supported (%dx%d). "
3241                                "VIDIOCMCAPTURE failed",
3242                             mmap.width, mmap.height)
3243                         return err;
3244                 }
3245
3246                 fr = &cam->frame[mmap.frame];
3247
3248                 if (mmap.width  != cam->window.width ||
3249                     mmap.height != cam->window.height ||
3250                     mmap.format != cam->picture.palette) {
3251
3252                         struct video_window win;
3253                         struct video_picture pict;
3254
3255                         if(*cam->requested_frame
3256                            || cam->frame_current->queued) {
3257                                 DBG(6, "VIDIOCMCAPTURE. Change settings for "
3258                                        "frame #%u: %dx%d, format %s. Wait...",
3259                                     mmap.frame, mmap.width, mmap.height,
3260                                     symbolic(v4l1_plist, mmap.format))
3261                                 err = wait_event_interruptible
3262                                       ( cam->wait_queue,
3263                                         cam->disconnected ||
3264                                         (!*cam->requested_frame &&
3265                                          !cam->frame_current->queued) );
3266                                 if (err)
3267                                         return err;
3268                                 if (cam->disconnected)
3269                                         return -ENODEV;
3270                         }
3271
3272                         memcpy(&win, &cam->window, sizeof(win));
3273                         memcpy(&pict, &cam->picture, sizeof(pict));
3274                         win.width = mmap.width;
3275                         win.height = mmap.height;
3276                         pict.palette = mmap.format;
3277
3278                         if (w9968cf_stop_transfer(cam))
3279                                 goto ioctl_fail;
3280
3281                         /* This before set_window */
3282                         if (w9968cf_set_picture(cam, pict))
3283                                 goto ioctl_fail;
3284
3285                         if (w9968cf_set_window(cam, win))
3286                                 goto ioctl_fail;
3287
3288                         if (w9968cf_start_transfer(cam))
3289                                 goto ioctl_fail;
3290
3291                 } else  if (fr->queued) {
3292
3293                         DBG(6, "Wait until frame #%u is free", mmap.frame)
3294
3295                         err = wait_event_interruptible(cam->wait_queue,
3296                                                        cam->disconnected ||
3297                                                        (!fr->queued));
3298                         if (err)
3299                                 return err;
3300                         if (cam->disconnected)
3301                                 return -ENODEV;
3302                 }
3303
3304                 w9968cf_push_frame(cam, mmap.frame);
3305                 DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame)
3306                 return 0;
3307         }
3308
3309         case VIDIOCSYNC: /* wait until the capture of a frame is finished */
3310         {
3311                 unsigned int f_num;
3312                 struct w9968cf_frame_t* fr;
3313                 int err = 0;
3314
3315                 if (copy_from_user(&f_num, arg, sizeof(f_num)))
3316                         return -EFAULT;
3317
3318                 if (f_num >= cam->nbuffers) {
3319                         DBG(4, "Invalid frame number (%u). "
3320                                "VIDIOCMCAPTURE failed", f_num)
3321                         return -EINVAL;
3322                 }
3323
3324                 DBG(6, "VIDIOCSYNC called for frame #%u", f_num)
3325
3326                 fr = &cam->frame[f_num];
3327
3328                 switch (fr->status) {
3329                 case F_UNUSED:
3330                         if (!fr->queued) {
3331                                 DBG(4, "VIDIOSYNC: Frame #%u not requested!",
3332                                     f_num)
3333                                 return -EFAULT;
3334                         }
3335                 case F_ERROR:
3336                 case F_GRABBING:
3337                         err = wait_event_interruptible(cam->wait_queue,
3338                                                        (fr->status == F_READY)
3339                                                        || cam->disconnected);
3340                         if (err)
3341                                 return err;
3342                         if (cam->disconnected)
3343                                 return -ENODEV;
3344                         break;
3345                 case F_READY:
3346                         break;
3347                 }
3348
3349                 if (w9968cf_vpp)
3350                         w9968cf_postprocess_frame(cam, fr);
3351
3352                 fr->status = F_UNUSED;
3353
3354                 DBG(5, "VIDIOCSYNC(%u) successfully called", f_num)
3355                 return 0;
3356         }
3357
3358         case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/
3359         {
3360                 struct video_unit unit = {
3361                         .video = cam->v4ldev->minor,
3362                         .vbi = VIDEO_NO_UNIT,
3363                         .radio = VIDEO_NO_UNIT,
3364                         .audio = VIDEO_NO_UNIT,
3365                         .teletext = VIDEO_NO_UNIT,
3366                 };
3367
3368                 if (copy_to_user(arg, &unit, sizeof(unit)))
3369                         return -EFAULT;
3370
3371                 DBG(5, "VIDIOCGUNIT successfully called")
3372                 return 0;
3373         }
3374
3375         case VIDIOCKEY:
3376                 return 0;
3377
3378         case VIDIOCGFBUF:
3379         {
3380                 if (clear_user(arg, sizeof(struct video_buffer)))
3381                         return -EFAULT;
3382
3383                 DBG(5, "VIDIOCGFBUF successfully called")
3384                 return 0;
3385         }
3386
3387         case VIDIOCGTUNER:
3388         {
3389                 struct video_tuner tuner;
3390                 if (copy_from_user(&tuner, arg, sizeof(tuner)))
3391                         return -EFAULT;
3392
3393                 if (tuner.tuner != 0)
3394                         return -EINVAL;
3395
3396                 strcpy(tuner.name, "no_tuner");
3397                 tuner.rangelow = 0;
3398                 tuner.rangehigh = 0;
3399                 tuner.flags = VIDEO_TUNER_NORM;
3400                 tuner.mode = VIDEO_MODE_AUTO;
3401                 tuner.signal = 0xffff;
3402
3403                 if (copy_to_user(arg, &tuner, sizeof(tuner)))
3404                         return -EFAULT;
3405
3406                 DBG(5, "VIDIOCGTUNER successfully called")
3407                 return 0;
3408         }
3409
3410         case VIDIOCSTUNER:
3411         {
3412                 struct video_tuner tuner;
3413                 if (copy_from_user(&tuner, arg, sizeof(tuner)))
3414                         return -EFAULT;
3415
3416                 if (tuner.tuner != 0)
3417                         return -EINVAL;
3418
3419                 if (tuner.mode != VIDEO_MODE_AUTO)
3420                         return -EINVAL;
3421
3422                 DBG(5, "VIDIOCSTUNER successfully called")
3423                 return 0;
3424         }
3425
3426         case VIDIOCSFBUF:
3427         case VIDIOCCAPTURE:
3428         case VIDIOCGFREQ:
3429         case VIDIOCSFREQ:
3430         case VIDIOCGAUDIO:
3431         case VIDIOCSAUDIO:
3432         case VIDIOCSPLAYMODE:
3433         case VIDIOCSWRITEMODE:
3434         case VIDIOCGPLAYINFO:
3435         case VIDIOCSMICROCODE:
3436         case VIDIOCGVBIFMT:
3437         case VIDIOCSVBIFMT:
3438                 DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s "
3439                        "(type 0x%01X, "
3440                        "n. 0x%01X, "
3441                        "dir. 0x%01X, "
3442                        "size 0x%02X)",
3443                     V4L1_IOCTL(cmd),
3444                     _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
3445
3446                 return -EINVAL;
3447
3448         default:
3449                 DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s "
3450                        "type 0x%01X, "
3451                        "n. 0x%01X, "
3452                        "dir. 0x%01X, "
3453                        "size 0x%02X",
3454                     V4L1_IOCTL(cmd),
3455                     _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
3456
3457                 return -ENOIOCTLCMD;
3458
3459         } /* end of switch */
3460
3461 ioctl_fail:
3462         cam->misconfigured = 1;
3463         DBG(1, "VIDIOC%s failed because of hardware problems. "
3464                "To use the camera, close and open it again.", V4L1_IOCTL(cmd))
3465         return -EFAULT;
3466 }
3467
3468
3469 static const struct file_operations w9968cf_fops = {
3470         .owner =   THIS_MODULE,
3471         .open =    w9968cf_open,
3472         .release = w9968cf_release,
3473         .read =    w9968cf_read,
3474         .ioctl =   w9968cf_ioctl,
3475         .compat_ioctl = v4l_compat_ioctl32,
3476         .mmap =    w9968cf_mmap,
3477         .llseek =  no_llseek,
3478 };
3479
3480
3481
3482 /****************************************************************************
3483  * USB probe and V4L registration, disconnect and id_table[] definition     *
3484  ****************************************************************************/
3485
3486 static int
3487 w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
3488 {
3489         struct usb_device *udev = interface_to_usbdev(intf);
3490         struct w9968cf_device* cam;
3491         int err = 0;
3492         enum w9968cf_model_id mod_id;
3493         struct list_head* ptr;
3494         u8 sc = 0; /* number of simultaneous cameras */
3495         static unsigned short dev_nr = 0; /* we are handling device number n */
3496
3497         if (le16_to_cpu(udev->descriptor.idVendor)  == winbond_id_table[0].idVendor &&
3498             le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
3499                 mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */
3500         else if (le16_to_cpu(udev->descriptor.idVendor)  == winbond_id_table[1].idVendor &&
3501                  le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct)
3502                 mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */
3503         else
3504                 return -ENODEV;
3505
3506         cam = (struct w9968cf_device*)
3507                   kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL);
3508         if (!cam)
3509                 return -ENOMEM;
3510
3511         mutex_init(&cam->dev_mutex);
3512         mutex_lock(&cam->dev_mutex);
3513
3514         cam->usbdev = udev;
3515         /* NOTE: a local copy is used to avoid possible race conditions */
3516         memcpy(&cam->dev, &udev->dev, sizeof(struct device));
3517
3518         DBG(2, "%s detected", symbolic(camlist, mod_id))
3519
3520         if (simcams > W9968CF_MAX_DEVICES)
3521                 simcams = W9968CF_SIMCAMS;
3522
3523         /* How many cameras are connected ? */
3524         mutex_lock(&w9968cf_devlist_mutex);
3525         list_for_each(ptr, &w9968cf_dev_list)
3526                 sc++;
3527         mutex_unlock(&w9968cf_devlist_mutex);
3528
3529         if (sc >= simcams) {
3530                 DBG(2, "Device rejected: too many connected cameras "
3531                        "(max. %u)", simcams)
3532                 err = -EPERM;
3533                 goto fail;
3534         }
3535
3536
3537         /* Allocate 2 bytes of memory for camera control USB transfers */
3538         if (!(cam->control_buffer = kzalloc(2, GFP_KERNEL))) {
3539                 DBG(1,"Couldn't allocate memory for camera control transfers")
3540                 err = -ENOMEM;
3541                 goto fail;
3542         }
3543
3544         /* Allocate 8 bytes of memory for USB data transfers to the FSB */
3545         if (!(cam->data_buffer = kzalloc(8, GFP_KERNEL))) {
3546                 DBG(1, "Couldn't allocate memory for data "
3547                        "transfers to the FSB")
3548                 err = -ENOMEM;
3549                 goto fail;
3550         }
3551
3552         /* Register the V4L device */
3553         cam->v4ldev = video_device_alloc();
3554         if (!cam->v4ldev) {
3555                 DBG(1, "Could not allocate memory for a V4L structure")
3556                 err = -ENOMEM;
3557                 goto fail;
3558         }
3559
3560         strcpy(cam->v4ldev->name, symbolic(camlist, mod_id));
3561         cam->v4ldev->owner = THIS_MODULE;
3562         cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
3563         cam->v4ldev->hardware = VID_HARDWARE_W9968CF;
3564         cam->v4ldev->fops = &w9968cf_fops;
3565         cam->v4ldev->minor = video_nr[dev_nr];
3566         cam->v4ldev->release = video_device_release;
3567         video_set_drvdata(cam->v4ldev, cam);
3568         cam->v4ldev->dev = &cam->dev;
3569
3570         err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
3571                                     video_nr[dev_nr]);
3572         if (err) {
3573                 DBG(1, "V4L device registration failed")
3574                 if (err == -ENFILE && video_nr[dev_nr] == -1)
3575                         DBG(2, "Couldn't find a free /dev/videoX node")
3576                 video_nr[dev_nr] = -1;
3577                 dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
3578                 goto fail;
3579         }
3580
3581         DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor)
3582
3583         /* Set some basic constants */
3584         w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
3585
3586         /* Add a new entry into the list of V4L registered devices */
3587         mutex_lock(&w9968cf_devlist_mutex);
3588         list_add(&cam->v4llist, &w9968cf_dev_list);
3589         mutex_unlock(&w9968cf_devlist_mutex);
3590         dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
3591
3592         w9968cf_turn_on_led(cam);
3593
3594         w9968cf_i2c_init(cam);
3595
3596         usb_set_intfdata(intf, cam);
3597         mutex_unlock(&cam->dev_mutex);
3598         return 0;
3599
3600 fail: /* Free unused memory */
3601         kfree(cam->control_buffer);
3602         kfree(cam->data_buffer);
3603         if (cam->v4ldev)
3604                 video_device_release(cam->v4ldev);
3605         mutex_unlock(&cam->dev_mutex);
3606         kfree(cam);
3607         return err;
3608 }
3609
3610
3611 static void w9968cf_usb_disconnect(struct usb_interface* intf)
3612 {
3613         struct w9968cf_device* cam =
3614            (struct w9968cf_device*)usb_get_intfdata(intf);
3615
3616         down_write(&w9968cf_disconnect);
3617
3618         if (cam) {
3619                 /* Prevent concurrent accesses to data */
3620                 mutex_lock(&cam->dev_mutex);
3621
3622                 cam->disconnected = 1;
3623
3624                 DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id))
3625
3626                 wake_up_interruptible_all(&cam->open);
3627
3628                 if (cam->users) {
3629                         DBG(2, "The device is open (/dev/video%d)! "
3630                                "Process name: %s. Deregistration and memory "
3631                                "deallocation are deferred on close.",
3632                             cam->v4ldev->minor, cam->command)
3633                         cam->misconfigured = 1;
3634                         w9968cf_stop_transfer(cam);
3635                         wake_up_interruptible(&cam->wait_queue);
3636                 } else
3637                         w9968cf_release_resources(cam);
3638
3639                 mutex_unlock(&cam->dev_mutex);
3640
3641                 if (!cam->users)
3642                         kfree(cam);
3643         }
3644
3645         up_write(&w9968cf_disconnect);
3646 }
3647
3648
3649 static struct usb_driver w9968cf_usb_driver = {
3650         .name =       "w9968cf",
3651         .id_table =   winbond_id_table,
3652         .probe =      w9968cf_usb_probe,
3653         .disconnect = w9968cf_usb_disconnect,
3654 };
3655
3656
3657
3658 /****************************************************************************
3659  * Module init, exit and intermodule communication                          *
3660  ****************************************************************************/
3661
3662 static int __init w9968cf_module_init(void)
3663 {
3664         int err;
3665
3666         KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION)
3667         KDBG(3, W9968CF_MODULE_AUTHOR)
3668
3669         if (ovmod_load)
3670                 request_module("ovcamchip");
3671
3672         if ((err = usb_register(&w9968cf_usb_driver)))
3673                 return err;
3674
3675         return 0;
3676 }
3677
3678
3679 static void __exit w9968cf_module_exit(void)
3680 {
3681         /* w9968cf_usb_disconnect() will be called */
3682         usb_deregister(&w9968cf_usb_driver);
3683
3684         KDBG(2, W9968CF_MODULE_NAME" deregistered")
3685 }
3686
3687
3688 module_init(w9968cf_module_init);
3689 module_exit(w9968cf_module_exit);
3690